ETC2 ESRD2R2M16R Spa capacitors solid polymer aluminum surface mount capacitor Datasheet

New!
Extended
Range Ratings,
20% More
Capacitance
Highlights
• Capacitance Range: 2.2 µF to 390 µF
• Ripple current ratings up to 3.5Arms
at 100 kHz and 105°C
• Low Impedance
• Ultra-Low E.S.R.; 10 mΩ @ 100 kHz
• -55° to 105°C operating temperature
• Voltage Range: 2.0 Vdc to 16 Vdc
• Solid electrolyte for extended life
• Footprint Compatible with “D” and
“E” Case Tantalum
• Flat Z and E.S.R. vs. temperature
• Ignition free
Filtering power of 3 or more tantalum chips and 50 year life
Solid polymer aluminum capacitors combine the high
capacitance capability of an electrolytic component
with the high frequency performance of film capacitors.
When the need for low impedance at high frequency is
critical for your design, one SPA chip is capable of
replacing several liquid electrolyte aluminum or
tantalum capacitors connected in parallel. This is due
to the ultra-low e.s.r. which results in significantly lower
impedance than either aluminum or tantalum
capacitors at frequencies of 100 kHz and above. There
is no longer a need to stack capacitors to lower the
impedance at high frequency. The low e.s.r. and high
CDE
SPAType
Type
CDE SPA
ESRE
ESRE
Dimensions(mm)
(mm)
Dimensions
capacitance make them ideal for bypassing high
frequency noise, and for switching frequency filtering
in DC/ DC conversion. SPA capacitors are packaged in
a molded resin case with the same footprint (7.3x4.3
mm) as the industry standard tantalum “D” and “E”
case sizes. The solid electrolyte results in a capacitor
with stable impedance and equivalent series resistance
over the entire operating temperature range and they
have more than twice the ripple current handling
capability of tantalum capacitors. In addition, the
solid electrolyte delivers a typical expected operating
life of more than 50 years, and it is ignition free.
ESRD ESRDESRD
ESRD
ESRL
7.3x4.3x4.27.3x4.3x2.8
7.3x4.3x3.1
7.3x4.3x4.1
7.3x4.3x1.8 7.3x4.3x1.8
7.3x4.3x1.1
68-270 68 - 2702.2-120
2.2 -120
15-68
ESRL
ESRH*
7.3x4.3x1.1
7.3x4.3x2.8
& 4.1
CapacitanceRange
Range(µF)
(µF)
Capacitance
100 - 390
100-390
15 - 68
68-270
Max.ESR
ESRatat100
100kHz
kHz(Ω)
(Ω)
Max.
0.0150.015
0.018
0.018.025 - .110
.025
- .110
.035
- .040
.035 - .018
.040
.015
Max. Ripple
Current
at 100
(Arms)
Max.Ripple
Current
at 100
kHzkHz
(Arms)
3.5 3.0
3.3
2.2 1.0 - 2.7
1.01.4
- 1.8
- 1.6
1.4 -- 3.0
1.6
2.0
*Operates to 125˚C
CORNELL
DUBILIER
Your Source For Capacitor Solutions
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: [email protected]
1.035
Chip and SMT
Capacitors
SPA CapacitorsSolid Polymer Aluminum Surface Mount Capacitors
Chip and SMT
Capacitors
SPA Capacitors
Solid Polymer Aluminum Capacitors
Applications
Motherboard By-Pass
Switching Supply Input/Output Filters
Power Supply Decoupling
High Frequency Noise Reduction
Laptop LCD Displays
Automotive Digital Equipment
Portable Electronic Equipment
Markings
Polarity Stripe (Anode)
Capacitance
+
("R" = Decimal Point)
W.V. Code
D = 2.0 V
E = 2.5 V
G = 4.0 V
J = 6.3 V
Lot Code
K = 8.0 V
B = 12.5 V
C = 16.0 V
Ordering Information
ESRD
M
4R7
16
PACKAGING CODE
CDE
Type
R = Tape & Reel
ESRD (1.8mm Ht.): 3500 pcs/ reel
ESRD (2.8mm Ht.): 2000 pcs/ reel
ESRE: 2000 pcs/reel
ESRL: 3500 pcs/reel
B = Bulk Quantity
(100 pc multiples)
CAPACITANCE
CODE
4R7 = 4.7 µF
220 = 22 µF
101 = 100 µF
1.036
R
CAPACITANCE
TOLERANCE
M = ± 20%
WVDC CODE
02 =
0E =
04 =
06 =
2.0 Vdc 08 = 8.0 Vdc
2.5 Vdc 12 = 12.5 Vdc
4.0 Vdc 16 = 16.0 Vdc
6.3 Vdc
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: [email protected]
CORNELL
DUBILIER
Your Source For Capacitor Solutions
Solid Polymer Aluminum Capacitors
ESRD Surface Mount
Outline Drawing
Dimensions in mm
Ratings
Part
Capacitance
Capacitance
(µF)
(µF)
1
1
Part
Number
Number
(Tape
(Tape &
& Reel)
Reel)
Maximum
Maximum
E.S.R
E.S.R
100kHz/20°C
100kHz/20°C
(Ω)
(Ω)
Maximum1
Maximum
Ripple
Current
Ripple Current
100kHz/105°C
100kHz/105°C
(Amps)
(Amps)
2.0Vdc
Vdc
2.0
100
ESRD101M02R
0.025
1.8
100
ESRD101M02R
0.025
1.8
120
ESRD121M02XR
0.015
2.7
180
ESRD181M02R
0.018
2.2
180
ESRD181M02R
0.018
2.2
220
ESRD221M02R
0.018
2.2
220
ESRD221M02R
0.018
2.2
270
ESRD271M02XR
3.3
2.50.012
Vdc
2.5
Vdc
82
ESRD820M0ER
0.025
1.8
82
ESRD820M0ER
0.025
1.8
150
ESRD151M0ER
0.018
2.2
100
ESRD101M0EXR
0.015
2.7
180
ESRD181M0ER
0.018
2.2
150
ESRD151M0ER
0.018
2.2
4.0
Vdc
180
ESRD181M0ER
0.018
2.2
56
ESRD560M04R
0.025
1.8
220
ESRD221M0EXR
0.012
3.3
120
ESRD121M04R
0.018
2.2
4.0
Vdc
56
ESRD560M04R
1.8
6.30.025
Vdc
82
ESRD820M04XR
0.015
2.7
10
ESRD100M06R
0.060
1.0
120
ESRD121M04R
0.018
2.2
22
ESRD220M06R
0.045
1.3
150
ESRD151M04XR
0.012
3.3
33
ESRD330M06R
0.035
1.6
6.3
Vdc
47
ESRD470M06R
0.025
1.8
10
ESRD100M06R
0.060
1.0
100
ESRD101M06R
0.018
2.2
22
ESRD220M06R
0.045
1.3
33
ESRD330M06R
1.6
8.00.035
Vdc
47
ESRD470M06R
0.025
1.8
8.2
ESRD8R2M08R
0.060
1.0
68
ESRD680M06XR
0.015
2.7
15
ESRD150M08R
0.045
1.3
100
ESRD101M06R
0.018
2.2
22
ESRD220M08R
0.035
1.6
120
ESRD121M06XR
0.012
3.3
33
ESRD330M08R
0.025
1.8
8.0 Vdc
68
ESRD680M08R
0.018
2.2
8.2
ESRD8R2M08R
0.060
1.0
12.5
Vdc
15
ESRD150M08R
0.045
1.3
22
ESRD220M08R
0.035
1.6
4.7
ESRD4R7M12R
0.080
1.0
33
ESRD330M08R
0.025
1.8
10
ESRD100M12R
0.060
1.0
68
ESRD680M08R
0.018
2.2
15
ESRD150M12R
0.050
1.3
12.5
Vdc
22
ESRD220M12R
0.040
1.3
4.7
ESRD4R7M12R
0.080
1.0
16.0
Vdc
10
ESRD100M12R
0.060
1.0
2.2
ESRD2R2M16R
0.110
1.0
15
ESRD150M12R
0.050
1.3
22
ESRD220M12R
0.040
1.3
4.7
ESRD4R7M16R
0.080
1.0
16.0
Vdc
6.8
ESRD6R8M16R
0.070
1.0
2.2
ESRD2R2M16R
0.110
1.0
8.2
ESRD8R2M16R
0.060
1.0
4.7
ESRD4R7M16R
0.080
1.0
For other
frequencies
use
the
ripple
current
frequency
multipliers.
6.8
ESRD6R8M16R
0.070
1.0
8.2
ESRD8R2M16R
0.060
1.0
1
Case
Case
Height
Height
HH
(mm)
( ±0.1 mm )
1.8 ± .1
1.8 ±1.8
.1
2.8 ±3.1
.2
2.8 ±3.1
.2
2.8 ± .2
1.8
1.8 ±3.1
.1
1.8 ± .1
3.1
2.8 ± .2
2.8 ± .2
2.8 ±1.8
.2
3.1
1.8 ± .1
1.8 ±1.8
.1
2.8 ± .2
1.8
2.8 ± .2
1.8
1.8 ±1.8
.1
1.8 ±3.1
.1
1.8 ± .1
1.8 ±1.8
.1
1.8 ±1.8
.1
2.8 ± .2
2.8 ±1.8
.2
1.8
1.8 ±3.1
.1
1.8 ± .1
1.8 ±1.8
.1
1.8 ±1.8
.1
2.8 ± .2
1.8
1.8
1.8 ± .1
1.8 ± .1
1.8 ±1.8
.1
1.8 ±1.8
.1
1.8
1.8 ±1.8
.1
1.8 ± .1
1.8 ± .1
1.8 ± .1
For other frequencies use the ripple current frequency multipliers.
CORNELL
DUBILIER
Your Source For Capacitor Solutions
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: [email protected]
1.037
Chip and SMT
Capacitors
SPA Capacitors
Chip and SMT
Capacitors
SPA Capacitors
Solid Polymer Aluminum Capacitors
ESRE Surface Mount, High Capacitance
Outline Drawing
H = 4.1 ± .2
Dimensions in mm
Ratings
Part
Maximum
Part
Maximum
Capacitance
Number
E.S.R
Capacitance
Number
E.S.R.
(Tape & Reel)
100kHz/20°C
(Tape & Reel)
100kHz/20°C
(µF)
(Ω)
(µF)
2.0 Vdc (Ω)
270
ESRE271M02R
0.015
2.0 Vdc
330
270
390
330
220
270
220
330
270
180
220
180
150
180
150
100
1
1
1.038
Maximum1 1
Maximum
Ripple Current
Ripple Current
100kHz/105°C
100kHz/105°C
(Amps)
ESRE331M02R
0.015
ESRE271M02R
0.015
ESRE391M02XR
0.010
ESRE331M02R 2.5 Vdc0.015
ESRE221M0ER
0.015
2.5 Vdc
ESRE271M0ER
0.015
ESRE221M0ER
0.015
ESRE331M0EXR
0.010
ESRE271M0ER 4.0 Vdc0.015
ESRE181M04R
0.015
4.0 Vdc
ESRE221M04XR
0.010
ESRE181M04R 6.3 Vdc0.015
ESRE151M06R
0.015
6.3 Vdc
ESRE181M06XR
0.010
ESRE151M06R
0.015
8.0 Vdc
8.0 Vdc
ESRE101M08R
0.015
For
other frequencies
use the ripple current frequency multipliers.
100
ESRE101M08R
0.015
(Amps)
3.0
3.0
3.0
3.5
3.0
3.0
3.0
3.0
3.5
3.0
3.0
3.5
3.0
3.0
3.5
3.0
3.0
3.0
For other frequencies use the ripple current frequency multipliers.
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: [email protected]
CORNELL
DUBILIER
Your Source For Capacitor Solutions
Solid Polymer Aluminum Capacitors
ESRL Surface Mount, Very Low Profile (1.1mm High)
Outline Drawing
Dimensions in mm
Ratings
Part
Maximum
Part
Maximum
Capacitance
Number
E.S.R
Capacitance
Number
E.S.R.
(Tape & Reel)
100kHz/20°C
(Tape & Reel)
100kHz/20°C
(µF)
(Ω)
2.0 Vdc
(µF)
68
ESRL680M02R
2.0 Vdc 0.035
2.5 Vdc
68 56
ESRL680M02R
0.035
ESRL560M0ER
0.035
4.0 Vdc
Vdc
2.5
39
ESRL390M04R
0.035
56 47
ESRL560M0ER
0.035
ESRL470M04R
0.035
6.3 Vdc
Vdc
4.0
33
ESRL330M06R
0.035
39
ESRL390M04R
0.035
8.0 Vdc
6.3 Vdc 0.035
22
ESRL220M08R
12.5 Vdc
33
ESRL330M06R
0.035
15
ESRL150M12R
0.040
8.0
Vdc
For other frequencies use the ripple current frequency multipliers.
Maximum1 1
Maximum
Ripple Current
Ripple Current
100kHz/105°C
100kHz/105°C
(Amps)
(Amps)
1.6
1.6 1.6
1.6
1.6 1.6
1.6
1.6
1.6
1.4
1.6
1
22
1
ESRL220M08R
0.035
1.6
For other frequencies use the ripple current frequency multipliers.
CORNELL
DUBILIER
Your Source For Capacitor Solutions
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: [email protected]
1.039
Chip and SMT
Capacitors
SPA Capacitors
Chip and SMT
Capacitors
SPA Capacitors
Solid Polymer Aluminum Capacitors
Specifications
Operating Temperature Range;
-55°C to +105°C, at 100% rated voltage
Moisture Resistance;
After 500 hours storage at +60°C and 90 to 95%
R.H. without load, the capacitor will meet the
following limits:
Surge Voltage;
125% of the rated working Vdc
Capacitance Range;
2.2 µF to 390 µF
Capacitance Tolerance;
±20% at 120 Hz and +20°C
DC Leakage Current (DCL);
After a two minute application of the rated
working voltage at +20°C:
2V - 4V: I ≤ 0.06CV
6.3V - 16V: I ≤ 0.04CV or 3µA
(whichever greater)
Dissipation Factor (DF);
The ratio of the capacitorís equivalent series
resistance to its reactance at 120Hz and +20°C.
ESRL & ESRD (1.8 mm ht.): D.F. is .06 Max.
ESRE & ESRD (2.8 mm ht.): D.F. is .10 Max.
∆C = +70%/-20% of the initial
measured value (2.0 Vdc, 2.5 Vdc),
+60%/-20% of the initial
measured value (4.0 Vdc),
+50%/-20% of the initial
measured value (6.3 Vdc),
+40%/-20% of the initial
measured value (all other voltages)
DF ≤ two times the initial specified value
DCL ≤ the initial specified value
Life Test;
Apply rated DC working voltage at 105°C for
1000 hours, and then stabilize them to +20°C.
Capacitors will meet the following limits:
∆C = ±10% of the initial measured value
DF ≤ the initial specified value
DCL ≤ the initial specified value
Resistance to Soldering Heat;
Heat the capacitors at 235°C in an oven for 200
seconds. The capacitors will meet the following
limits after stabilizing at 20°C:
Shelf Life Test;
Shelf life is typically 5 to 10 years. Accelerated
test: after 500 hours at 105°C, capacitors will meet
the following limits after stabilization at 20°C:
∆ C = ±10% of the initial measured value
∆C = ±10% of the initial measured value
DF ≤ the initial specified value
DF ≤ the initial specified value
DCL ≤ the initial specified value
DCL ≤ the initial specified value
Vibration;
No abnormal change shall occur to capacitors that
have been soldered (and attached) to a board when
subjected to a vibration of 1.5 mm amplitude that
is varied from 10 Hz to 2000 Hz in 20 min. cycles.
The test duration is 2 hours for each right angle
direction (total 6 hours). Capacitance is monitored
during the last cycle of the test for stablilty.
1.040
Shear Test;
No damage shall be visible after subjecting a
mounted capacitor to a side force of 5 N for 10
seconds
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
http://www.cornell-dubilier.com
E-mail: [email protected]
CORNELL
DUBILIER
Your Source For Capacitor Solutions
Similar pages