FM301 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION FM307 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Amperes FEATURES * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.24 gram DO-214AB MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 0.125 (3.17) 0.115 (2.92) 0.245 (6.22) 0.220 (5.59) 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.008 (0.203) 0.004 (0.102) 0.320 (8.13) 0.305 (7.75) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current T A = 75oC Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance SYMBOL FM301 FM302 FM303 FM304 FM305 FM306 FM307 UNITS VRRM 50 100 200 400 600 800 1000 Volts VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts IO 3.0 Amps I FSM 150 Amps (Note 2) RθJL (Note 3) Rθ JA 10 35 60 -65 to + 175 CJ T J , T STG Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range 0 0 C/ W C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage at 3.0A DC Maximum Full Load Reverse Current, Full cycle Average at TA = 75oC Maximum DC Average Reverse Current at Rated DC Blocking Voltage FM301 VF @T A = 25 o C IR @T A = 125 o C NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. Thermal resistance junction to terminal, 10.0X10.0mm2 copper pads to each terminal. 3. Thermal resistance junction to ambient, 10.0X10.0mm 2 copper pads to each terminal. FM302 FM303 FM304 FM305 FM306 FM307 UNITS 1.1 Volts 30 uAmps 5.0 150 uAmps uAmps 1998-8 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE INSTANTANEOUS FORWARD CURRENT, (A) 2.5 2.0 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load .5 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 250 8.3ms Single Half Sine-Wave (JEDED Method) 200 150 100 50 0 1 2 4 6 8 10 20 40 60 80100 NUMBER OF CYCLES AT 60Hz 20 10 4 2 1.0 .4 .2 .1 TJ = 25 Pulse Width=300£gs 1% Duty Cycle .04 .02 .01 .6 INSTANTANEOUS REVERSE CURRENT, (uA) 0 PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 3.0 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 4 1.0 .4 TJ = 25 .1 .04 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( FM301 THRU FM307 ) 200 100 60 40 20 10 6 4 TJ = 25 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) RECTRON