CIT J099 High sensitivity Datasheet

J099
RoHS Compliant
E197851
18.4 x 15.0 x 10.3 mm
Features
atures
•
•
•
•
High sensitivity
Super light weight
Switching current up to 12A
PC board mounting
Contact Data*
Contact Arrangement 1A = SPST N.O.
Contact Resistance
< 50 milliohms initial
Contact Rating
10A @ 277VAC, General Purpose, 100k cycles
Contact Material
AgSnO2
10A @ 30VDC, General Purpose, 100k cycles
Maximum Switching Power
300W
12A @ 125VAC, Resistive, 100k cycles
Maximum Switching Voltage
300VAC, 100VDC
Maximum Switching Current
12A
Coil Data*
Coil Voltage
VDC
Rated
Coil
Resistance
Ω +/- 10%
Pick Up Voltage
VDC (max)
Release Voltage
VDC (min)
75% of rated
voltage
10% of rated
voltage
Coil Power
W
Operate Time
ms
Release Time
ms
.45
8
5
Max
5
6.5
56
3.75
.50
12
15.6
320
9.00
1.2
24
31.2
1280
18.00
2.4
General Data*
Electrical Life @ rated load
100K cycles, average
Mechanical Life
10M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength, Coil to Contact
2500V rms min. @ sea level initial
Contact to Contact
1000V rms min. @ sea level initial
Shock Resistance
100m/s2 for 11 ms
Vibration Resistance
1.50mm double amplitude 10~40Hz
Terminal (Copper Alloy) Strength
5N
Operating Temperature
-40oC to +85oC
Storage Temperature
-40oC to +155oC
Solderability
260oC for 5 s
Weight
7g
* Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the
application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise
the operation of the relay.
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
J099
Ordering Information
1. Series
J099
1A
S
12VDC
.45
J099
2. Contact Arrangement
1A = SPST N.O.
3. Sealing Options
S = Sealed against flux ingress
4. Coil Voltage
5VDC
12VDC
24VDC
5. Coil Power
.45 = .45W
Dimensions
Units = mm
Schematics & PC Layouts
Bottom Views
page 2
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
Specifications and availability subject to change without notice.
Similar pages