EC610/EC611 SERIES ECLIPSE MINI - LED 6” POST-TOP/WALL TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE 1 2 3 4 5 6 WATTAGE VOLTAGE FINISH 1- Heavy cast aluminum top cover with integral LED heat dissipating pad. 2- One piece .090” (2.3) thick hard aluminum top shade. Underside surface is painted white enamel to optimize light performance (EC611 only). 3- Set of 4 X 1/2” (13) solid aluminum struts. 4- High impact white translucent UV stabilized acrylic diffuser. 5- Cast aluminum upper electrical housing. 6- Cast aluminum lower electrical housing. OPTION OPTION OPTION OPTION EC610 EC610-EC6WS EC611 EC611-EC6W MATERIALS CERTIFICATION Eclipse Mini is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. Light source is enclosed in a high impact white translucent UV stabilized acrylic sealed diffuser. The lower cast aluminum housing fits with a 4” or 5” (102 or 127) pole and contains all electrical controls on a removable tray. Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request. Rated IP65. ELECTRICAL LED DRIVER Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), optional 347V on request, minimum operating temperature of -30ºC/-22ºF, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110ºC). LED Standard 4000K/80CRI. Optional 2700K, 3000K and 3500K. Removable modular LED platform. 20” (508) 8.7” (221) 22.2” (564) 22.2” (564) LIFE 60,000hrs L86B50 (based on IESNA TM-21 Test Method and LM-80 data). 139,000hrs L70B50 (calculated projection from LM-80 data). EC610 EPA: 0.86 EC611 EPA: 0.92 FINISH Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. MOUNTING LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. June 2017 Rev 0 Maximum weight:9.11lbs (4.13kg) Standard luminaire mounts on a 4” (102) or 5” (127) pole. Alternate wall and pole attachments are proposed with high quality components to meet multiple installation conditions. LUMINIS.COM 1 EC610/EC611 SERIES ECLIPSE MINI - LED TYPICAL PHOTOMETRY SUMMARY Descriptive Information EC610-L1W48r0 EC611-L1W48r0 Total Lms: 2812 Lumens Total Input Watts: 49.6 W Source: LED Efficacy: 56.7 Lumens/Watt BUG: B1-U3-G2 CCT/CRI: 4000K/80 Maximum Candela: 385 @ 65ºV Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION LED LIGHT SELECTION (4000K/80CRI) MODEL# SUFFIX L1W18r1 L1W30r1 L1W48r0 VOLTAGE INPUT WATTS DELIVERED LUMENS 19W 34W 50W 1163 2011 2812 1 FINISH STANDARD COLORS 120V 277V Optional 347V EC610 WHT BKT BZT MST GRT DGT CHT Snow white Jet black Bronze Matte silver Titanium gray Gun metal Champagne OPTIONAL COLORS CS Custom color RAL RAL# color EC611 (Refer to color chart) OPTIONS FS PH 347L MOUNTING Fuse 2 Photocell 2 347V input power driver LIGHT Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 K3 K35 2700K CCT 80 CRI (LCF: 0.91) 3000K CCT 80 CRI (LCF: 0.94) 3500K CCT 80 CRI (LCF: 0.98) NOTE: Other CCT & higher CRI available, please consult factory. ACCESSORIES AC6Pole mount attachment with 45º support 2AC6 Double pole mount attachments with 45º support at 180º AW6Wall mount attachment with 45º support EC6PPole mount attachment with arm 2EC6P Double pole mount attachment with arms at 180º EC6WWall mount attachment with arm EC6PSPole mount attachment with short arm (EC610 only) 2EC6PS Double pole mount attachment with short arms at 180º (EC610 only) EC6WSWall mount attachment with short arm (EC610 only) TN33” Tenon pole adaptor3 PR6Pedestal mount adaptor HS6 House side shield NOTES 1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) 3- 3” tenon pole adaptor only required for 3” O.D. poles by others. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 2 June 2017 Rev 0 ELECTRICAL EC610/EC611 SERIES ECLIPSE MINI - LED POLE MOUNT 20.5” (521) 9.5” (241) 13” (330) 11” 30” (762) (279) 22.2” (564) 22.2” (564) Power feed Power feed EC6P (Applicable for EC610 and EC611) 1” X 2” (25x51) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.97) EC6PS (Applicable for EC610 only) 1” X 2” (25x51) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.72) Power feed AC6 1” X 2” (25x51) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) 2AC6 Double pole mount attachments with 45º support at 180º 22.2” (564) 2EC6P Double pole mount attachment with arms at 180º NOTE: 2EC6PS Double pole mount attachment with short arms at 180º (EC610 only) PST pole with AC6 or 2AC6 attachment requires a 30” (762) tenon extension over pole nominal height. EC6P, 2EC6P, EC6PS and 2EC6PS require an 18” tenon extension. Factory installed. 6” Dia. (152) base 4.7” (119) dia. Bolt circle 26.7” (680) 6” (152) dia. Base PR6 6” Dia. X 26.7” H. extruded aluminum stand designed for short walls or pier mount. MATCHING POLE SELECTION Ø 4” Ø 5” Ø 4” Tapered Pole Ø 4” Height PAA410 PAA510 PST10 ------- PSB10 10 Ft. (3 M) PAA412 PAA512 PST12 ------- PSB12 12 Ft. (3,6 M) PAA414 PAA514 PST14 ------- PSB14 14 Ft. (4,2 M) PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) PAA418 PAA518 ------- PTA18 PSB18 18 Ft. (5,5 M) PAA420 PAA520 ------- PTA20 PSB20 20 Ft. (6,0 M) ------- ------- ------- PTA25 ------- 25 Ft. (7,6 M) PSB Pole series LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. PST Pole series PAA Pole series PTA Pole series LUMINIS.COM June 2017 Rev 0 For additional pole details, please refer to separate pole specification sheet. Ø 4”= 102mm Ø5”= 127mm EC610/EC611 SERIES ECLIPSE MINI - LED WALL MOUNT 13” (330) 20.5” (521) 9.5” (241) 22.2” (564) 11” (279) 22.2” (564) 22.2” (564) Power feed Power feed Power feed AW6 1” X 2” (25X51) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. EC6W (Applicable for EC610 and EC611) 1” X 2” (25X51) extruded aluminum wall mount arm with cast aluminum wall plate. Mounting EC6WS (Applicable for EC610 only) 1” X 2” (25X51) extruded aluminum wall mount arm with cast aluminum wall plate. Mounting 3” (76) 4.625” (118) 11” (279) Mounting 3” (76) 3” (76) 4.625” (118) 4.625” (118) Power feed Power feed LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 4 June 2017 Rev 0 Power feed