ASD10 I sol at e d a n d R e gul at ed 10 WATT Modula r DC/DC Co n ve rte rs series Wide 4:1 Input Range 9 to 36V or 18 to 75V Available High Efficiency Regulated Outputs 1500VDC Isolation Unit measures 1”W x 2”L x 0.31”H Full EMI Shielding Standard Pinouts Model Number Output Voltage Output Amps Input Range SINGLE OUTPUT ASD10-12S3 3.3 VDC ASD10-48S3 ASD10-12S5 5 VDC ASD10-48S5 ASD10-12S9 9 VDC ASD10-48S9 ASD10-12S12 12 VDC ASD10-48S12 ASD10-12S15 15 VDC ASD10-48S15 2.5 2.5 2 2 1.1 1.1 0.83 0.83 0.67 0.67 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC DUAL OUTPUT ASD10-12D5 +/-5 VDC ASD10-48D5 ASD10-12D12 +/-12 VDC ASD10-48D12 ASD10-12D15 +/-15 VDC ASD10-48D15 +/-1 +/-1 +/-0.42 +/-0.42 +/-0.33 +/-0.33 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASD10 I sol at e d a n d R e gul at ed 10 WATT Modula r DC/DC Co n ve rte rs GENERAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage, Nominal Input Voltage Ranges Input Surge Voltage 12VDC 9-36 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. 48VDC 18-75 VDC OUTPUT SPECIFICATIONS Voltage and Current Preset Accuracy Cross Regulation (Duals) Load Regulation 20% - FL Line Regulation Minimum Load Temperature Coefficient Ripple/Noise (Pk-Pk, typ) Single 3.3V Single 5V Single 9,12V Single 15V Dual 5V Dual 12, 15V Overvoltage Protection Short Circuit Protection series See Selection Chart Singles: +/- 3% max. Duals: +/- 4% max. 5-8% typ. singles: +/- 0.5% duals: +/-1%, +/-3% (5V mod) singles: +/- 0.5% duals: +/- 1% 5% of Full Load +/-0.03%/°C (Note 1) 150mV 100mV (12Vin), 150mV (48Vin) 50mV (12Vin), 100mV (48Vin) 50mV 150mV 100mV Clamp, 130-150%* Clamp, need to release load* On/Off Control Shutdown Idle Current Input-Out Isolation In/Out Capacitance Efficiency at nom. Input Switching Frequency (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 15mA 1500VDC (48V) 500 VDC (12V) 1000 pF 12V: 72%-81%, typ. 48V: 77%-82%, typ. 450Khz ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Maximum Case Temp Input Fusing MTBF Shock/Vibration -25 to +71°C(FL) -40 to +125°C * 110°C * 12V: 4A, 48V: 2A 1,000,000 Hrs Mil Std 217, 25°C To MIL-STD 810°C PHYSICAL SPECIFICATIONS Case Material Construction Weight Aluminum Fully Encapsulated 0.64 oz, (18g) NOTES All specifications are typical at nominal input, full load, and 25°C unless otherwise noted 1. Ripple & Noise is measured by using a 20MHz bandwidth oscilloscope and terminating the output with a 47uF electrolytic capacitor paralleled with a 0.1uF ceramic capacitor. * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 D10_B ASD10 I sol at e d a n d R e gul at ed 10 WATT Modula r DC/DC Co n ve rte rs series MECHANICAL DIMENSIONS Pin# Single Outputs Dual Outputs .31in 7.8mm max .24in 6mm min +VOUT 1.00in 25.4mm .60in 15.24mm 1 +VIN 2 -VIN COM .40in 10.16mm 3 4 .50in 12.7mm -VOUT 5 CONTROL 6 .60in 15.24mm .10in 2.54mm .90in 22.86mm 1 2 3 4 5 6 +Input - Input +Output N/A - Output Control +Input - Input +Output Common - Output Control .10in 2.54mm 1.40in 35.56mm 2.00in 50.8mm TOLERANCES : .XX 0.5mm(0.02in) : .XXX 0.25mm(0.01in) OUTPUT DERATING CURVE DESCRIPTION 120 from 6.35mm to 7.8 mm n Change height DATE 2012/10/29 Output Power (%) 100 DIMENSION X<8 8<X<25 PIERCING ±0.1 ±0.1 25<X<100 80 100<X<300 300<X<800 60 UNIT SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) BENDING ±0.15 ±0.2 SIZE ANGULAR ±0.3° ±0.5° SCALE SHEET mm A4 MATERIAL OF MODEL NO. 1:1 TITLE Projection ±0.15 ±0.2 ±0.25 ±0.5° DRAWN ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED PART NO. ASD10 2D outline drawings Erica 40 20 0 0 10 20 30 40 50 Ambient Temp °C WWW.ASTRODYNETDI.COM 60 70 80 90 2915 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458