Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A SURFACE MOUNT FAST RECOVERY RECTIFIERS FSM10-005 THRU FSM10-10 FEATURES z FAST SWITCHING z GLASS PASSIVATED DEVICE z IDEAL FOR SURFACE MOUNTED APPLICATIONS z LOW LEAKAGE CURRENT z FAST SWITCHING TIME SOLDERABLE ENDS .105(2.67) .095(2.41) MECHANICAL DATA z CASE: TRANSFER MOLDED MELF, DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINALS: SOLDERABLE PER MIL-STD-750, METHOD 2026 z POLARITY: CATHODE INDICATED BY COLOR BAND z WEIGHT: 0.135 GRAMS .022(.60) .018(.46) .205(5.2) .190(4.8) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% FSM10 FSM10 FSM10 FSM10 FSM10 FSM10 FSM10 RATINGS SYMBOL UNITS -005 -01 -02 -04 -06 -08 -10 MAXIMUM RECURRENT PEAK REVERSE VOLTAGE VRRM 50 100 200 400 600 800 1000 V MAXIMUM RMS VOLTAGE VRMS 35 70 140 280 420 560 700 V MAXIMUM DC BLOCKING VOLTAGE VDC 50 100 200 400 600 800 1000 V MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT 1.0 A IO AT TL=75°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF 30 A IFSM SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) CJ 15 PF STORAGE TEMPERATURE RANGE TSTG -55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 125 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) FSM10 CHARACTERISTICS SYMBOL -005 MAXIMUM FORWARD VOLTAGE AT Io DC VF MAXIMUM REVERSE CURRENT AT 25℃ IR FSM10 -01 FSM10 -02 FSM10 -04 1.3 FSM10 -08 FSM10 UNITS -10 V μA 5 MAXIMUM REVERSE RECOVERY TIME (NOTE 2) TRR 150 NOTE: 1. MEASURED AT 1.0 MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 V 2. THERMAL RESISTANCE FROM JUNCTION TO TERMINAL 5.0mm2 (.013 mm THICK) LAND AREAS 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A FSM10-005 THRU FSM10-10 FSM10 -06 250 Page: 1 500 nS RATINGS AND CHARACTERISTIC CURVE FSM10-005 THRU FSM10-10 FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 10Ω NO INDUCTIVE 50Ω NO INDUCTIVE Trr +0.5A (-) D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) -0.25A 1Ω NON INDUCTIVE (-) 0 OSCILLOSCOPE ( NOTE 1 ) (+) -1.0A NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS 1cm SET TIME BASE FOR 10/20 ns/cm 1.0 0.8 Fig. 5-MAXIMUM FORWARD SURGE NUMBER OF CYCLES 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 200 LEAD TEMPERATURE (OC) FIG. 3-TYPICAL JUNCTION CAPACITANCE CAPACITANCE, pF 20 Tj=25oC 10 PEAK FORWARD SURGE CURRENT AMPERES Io-AVERAGE RECTIFIED CURRENT (A) Fig. 2-MAXIMUM CURRENT DERATING CURVE TA=75oC 8.3ms SINGLE HALF SINE-WAVE JEDEC METHOD 20 10 1.0 CYCLE 0 1 10 100 NUMBER OF CYCLES AT 60 HZ f = 1 MHz Vsig = 50 mVp-p 1 1 10 FIG. 6-TYPICAL INSTANTANEOUS WARD CHARACTERISTICS 100 10 FIG. 4-TYPICAL REVERSE CHARACTERISTICS 100 10 TJ=100oC 1.0 0.1 TJ=25oC INSTANTANEOUS FORWARD CURRENT, IF(A) REVERSE VOLTAGE, VOLTS INSTANTANEOUS REVERSE CURRENT, MICRO AMPERES(uA) 30 1.0 0.1 Tj=25oC PULSE WIDTH =300us 1% DUTY CYCLE .01 .4 .01 0 20 40 60 80 100 120 140 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE FSM10-005 THRU FSM10-10 Page: 2