GBPC1005, GBPC101, GBPC102, GBPC104, GBPC106, GBPC108, GBPC110 www.vishay.com Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES ~ • UL recognition, file number E54214 • Ideal for printed circuit boards ~ e4 • Typical IR less than 0.1 μA • High case dielectric strength ~ ~ • High surge current capability Case Style GBPC1 • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS Package GBPC1 IF(AV) 3A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 60 A IR 5 μA VF at IF = 1.5 A 1.0 V TJ max. 150 °C Diode variations Quad General purpose use in AC/DC bridge full wave rectification for switching power supply, home appliances, office equipment, industrial automation applications. MECHANICAL DATA Case: GBPC1 Molding compound meets UL 94 V-0 flammability rating Base P/N-E4 - RoHS-compliant, commercial grade Terminals: Silver plated J-STD-002 and JESD22-B102 leads, solderable per Polarity: As marked, positive lead by belevled corner Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GBPC 1005 GBPC 101 GBPC 102 GBPC 104 GBPC 106 GBPC 108 GBPC 110 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward rectified output current at TC = 60 °C (1) TA = 25 °C (2) Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range IF(AV) 3.0 2.0 A IFSM 60 A I2t 15 A2s TJ, TSTG - 55 to + 150 °C Notes (1) Unit mounted on 4.0" x 4.0" x 0.11" thick (10.5 cm x 10.5 cm x 0.3 cm) aluminum plate (2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length with 0.5" x 0.5" (12 mm x 12 mm) copper pads Revision: 08-Jul-13 Document Number: 88611 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GBPC1005, GBPC101, GBPC102, GBPC104, GBPC106, GBPC108, GBPC110 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL Maximum instantaneous forward voltage drop per diode Maximum DC reverse current at rated DC blocking voltage per diode Typical junction capacitance per diode IF = 1.5 A GBPC 1005 GBPC 101 GBPC 102 GBPC 104 VF GBPC 106 GBPC 108 GBPC 110 UNIT 1.0 V 5.0 TA = 25 °C μA IR TA = 125 °C 500 4.0 V, 1 MHz CJ 21 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) GBPC 1005 GBPC 101 GBPC 102 GBPC 104 RJA 12 RJC 8.0 GBPC 106 GBPC 108 GBPC 110 UNIT °C/W Note (1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 2.5 51 100 Paper box GBPC106-E4/51 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 60 Case Temperature, TC Heatsink Mounting 4.0 x 4.0 x 0.11" Thk. (10.5 x 10.5 x 0.3 cm) Al. Plate 60 Hz Resistive or Inductive Load 4.0 3.0 Peak Forward Surge Current (A) Average Forward Output Current (A) 5.0 2.0 1.0 Ambient Temperature, TA P.C.B. Mounting 0.375" (9.5 mm) Lead Length 0 0 50 TC = 60 °C Single Sine-Wave 50 40 30 20 10 1.0 Cycle 0 100 150 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Derating Curve Output Rectified Current Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Revision: 08-Jul-13 Document Number: 88611 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GBPC1005, GBPC101, GBPC102, GBPC104, GBPC106, GBPC108, GBPC110 www.vishay.com Vishay General Semiconductor 100 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 10 1 0.1 0.01 0.4 0.6 0.8 1.2 1.0 1.4 10 1 0.1 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Forward Characteristics Per Diode Fig. 5 - Typical Junction Capacitance Per Diode 100 10 Transient Thermal Impedance (°C/W) 100 Instantaneous Reverse Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 125 °C 1 0.1 TJ = 25 °C 10 1 0.1 0.01 0.01 0 20 40 60 80 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Fig. 4 - Typical Reverse Leakage Characteristics Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style GBPC1 Hole For #6 Screw 0.158 (4.01) DIA. 0.142 (3.61) 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.128 (3.25) 0.048 (1.22) 0.094 (2.4) x 45° 0.040 (1.02) TYP. 0.032 (0.81) DIA. 0.028 (0.71) 0.750 (19.05) MIN. 0.200 (5.08) 0.160 (4.06) Polarity shown on side of case: Positive lead by beveled corner Revision: 08-Jul-13 Document Number: 88611 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: GBPC1005-E4/51 GBPC101-E4/51 GBPC102-E4/51 GBPC104-E4/51 GBPC106-E4/51 GBPC108-E4/51 GBPC110-E4/51