DTD114GK NPN 500mA 50V Digital Transistors Datasheet (Bias Resistor Built-in Transistors) lOutline Parameter Value VCEO IC R 50V 500mA 10kW SMT3 Collector Base Emitter DTD114GK SOT-346 (SC-59) lFeatures lInner circuit 1) Built-In Biasing Resistors 2) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit). 3) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of completely eliminating parasitic effects. 4) Complementary PNP Types :DTB114GK 5) Lead Free/RoHS Compliant. lApplication Switching circuit, Inverter circuit, Interface circuit, Driver circuit lPackaging specifications Part No. DTD114GK Package Package size (mm) Taping code SMT3 2928 T146 www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 1/4 Basic Reel size Tape width ordering (mm) (mm) unit (pcs) 180 8 3,000 Marking L24 2012.11 - Rev.C Data Sheet DTD114GK lAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Values Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 5 V Collector current IC 500 mA Power dissipation Pd *2 200 mW Tj 150 °C Tstg -55 to +150 °C Junction temperature Range of storage temperature lElectrical characteristics(Ta = 25°C) Parameter Symbol Collector-base breakdown voltage BVCBO Collector-emitter breakdown voltage Emitter-base breakdown voltage Min. Typ. Max. Unit IC= 50mA 50 - - V BVCEO IC= 1mA 50 - - V BVEBO IE= 720mA 5 - - V Collector cut-off current ICBO VCB = 50V - - 0.5 mA Emitter cut-off current IEBO VEB = 4V 300 - 580 mA - - 0.3 V 56 - - - Collector-emitter saturation voltage DC current gain Emitter-base resistance Transition frequency VCE(sat) hFE Conditions IC / IB= 50mA / 2.5mA VCE= 5V , IC= 50mA R - 7 10 13 kW fT *1 VCE = 10V, IE = -5mA, f = 100MHz - 200 - MHz *1 Characteristics of built-in transistor *2 Each terminal mounted on a reference footprint www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 2/4 2012.11 - Rev.C Data Sheet DTD114GK lElectrical characteristic curves(Ta = 25°C) Fig.2 Grounded emitter output characteristics Fig.1 Grounded emitter propagation characteristics 500 10 4.5mA 4.0mA II= 5.0mA 3.5mA 3.0mA 2.5mA COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : Ic (mA) VCE=5V 1 0.1 Ta=100ºC 25ºC -40ºC 0.01 0.001 0 0.5 1 1.5 2.0mA 400 1.5mA 300 1.0mA 200 0.5mA 100 Ta=25ºC 0A 0 0 5 10 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) Fig.4 Collector-emitter saturation voltage vs. Collector Current DC CURRENT GAIN : hFE COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Fig.3 DC Current gain vs. Collector Current COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 3/4 2012.11 - Rev.C Data Sheet DTD114GK lDimensions (Unit : mm) D A SMT3 c Lp L1 E HE Q e A3 b x S A l1 A1 A e1 e S b2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A A1 A3 b c D E e HE L1 Lp Q x y DIM b2 e1 l1 MILIMETERS MIN MAX 1.00 1.30 0.00 0.10 0.25 0.35 0.50 0.09 0.25 2.80 3.00 1.50 1.80 0.95 2.60 3.00 0.30 0.60 0.40 0.70 0.20 0.30 0.10 0.10 INCHES MIN 0.039 0.000 MAX 0.051 0.004 0.010 0.014 0.004 0.110 0.059 0.020 0.010 0.118 0.071 0.037 0.102 0.012 0.016 0.008 - MILIMETERS MIN MAX 0.60 2.10 0.90 0.118 0.024 0.028 0.012 0.004 0.004 INCHES MIN - MAX 0.024 0.083 - 0.035 Dimension in mm / inches www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 4/4 2012.11 - Rev.C Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1102A Datasheet DTD114GK - Web Page Buy Distribution Inventory Part Number Package Unit Quantity Minimum Package Quantity Packing Type Constitution Materials List RoHS DTD114GK SMT3 3000 3000 Taping inquiry Yes