Recom EN-60601-1 1 watt smd single & dual output Datasheet

Features
Unregulated
Converters
●
●
●
●
●
●
●
●
Fully RoHS 6/6 Conform
Full Power at 100°C Ambient Temperature
1kVDC or 3kVDC Isolation Options
UL /CSA Certified, CB Report
Suitable for Fully Automated Assembly
(including Vapour Phase Soldering)
Optional Continuous Short Circuit Protection
Efficiency to 84%
Built-In EN55022 Class A Filter
Selection Guide
Part
Number
SMD
(3kV)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(mA)
R1S**-xx3.3
(H)
3.3, 5, 12, 15, 24
3.3
R1S**-xx05
(H)
3.3, 5, 12, 15, 24
5
R1S**-xx09
(H)
3.3, 5, 12, 15, 24
R1S**-xx12
(H)
R1S**-xx15
(H)
R1S**-xx24
Efficiency
(%)
Max
Capacitive
Load(1)
303
75
2200µF
200
72-78
1000µF
9
111
74-78
1000µF
3.3, 5, 12, 15, 24
12
84
75-80
470µF
3.3, 5, 12, 15, 24
15
66
75-82
470µF
(H)
3.3, 5, 12, 15, 24
24
42
74-84
220µF
R1D**-xx3.3
(H)
3.3, 5, 12, 15, 24
±3.3
±152
75
±1000µF
R1D**-xx05
(H)
3.3, 5, 12, 15, 24
±5
±100
72-78
±470µF
R1D**-xx09
(H)
3.3, 5, 12, 15, 24
±9
±56
74-78
±470µF
R1D**-xx12
(H)
3.3, 5, 12, 15, 24
±12
±42
75-80
±220µF
R1D**-xx15
(H)
3.3, 5, 12, 15, 24
±15
±33
75-82
±220µF
R1D**-xx24
(H)
3.3, 5, 12, 15, 24
±24
±21
74-84
±100µF
xx = Input Voltage (other input and output voltage combinations available on request)
* add Suffix “H” for 3kV Isolation, e.g. R1S-0505/H, R1D-0505/H, R1S12-0505/H, R1D12-0505/H
* add Suffix “P” for Continuous Short Circuit Protection, e.g. R1S8-0505/P, R1S-0505/HP, R1D12-0505/HP
* add suffix -R for tape & reel packing e.g. R1S-0505-R. For more details see Application Notes.
ECONOLINE
DC/DC-Converter
with 3 year Warranty
1 Watt SMD
Single & Dual
Output
RoHS
2011/65/EU
6/6
E358085
UL-60950-1 Certified
EN-60950-1 Certified
EN-60601-1 Certified*
(*/H suffix)
R1S_R1D
Case and Pinning Options (note restrictions on /H option)
R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
Description
R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
±10%
Output Voltage Accuracy
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
Output Ripple and Noise (20MHz BW limited)
Operating Frequency
Efficiency at Full Load
Minimum Load = 0%
E-24
±2% typ., ±5% max.
All Variants
3.3V output types
5V output type
9V output type
12V, 15V, 24V output types
1.2%/1% of Vin typ.
15% typ., 20% max.
12% typ., 15% max.
7% typ., 10% max.
6% typ., 10% max.
50mVp-p typ., 100mVp-p max.
20kHz min. / 60kHz typ. / 100kHz max.
See Selection Guide
Specifications valid for 10% minimum load only.
cont.
REV: 1/2013
The R1S and R1D converters are of the
enclosed open frame type, i.e. they are
not potted.
The converters are typically used in
general purpose and industrial low
power isolation and voltage matching
applications where an SMD converter is
required.
The converter series feature an extended ambient temperature operating
range of -40°C ~ +100°C without
derating and optional continuous short
circuit protection.
In addition to two isolation options and
three different case formats, the
converters are also available prepacked
as tape and reel for use with automatic
insertion machines.
Refer to Application Notes
www.recom-electronic.com
R1S_R1D
Series
ECONOLINE
DC/DC-Converter
Specifications - continued
(tested for 1 second)
(rated for 1 minute)
(tested for 1 second)
(rated for 1 minute)
R1S, R1S8, R1D, R1D10
R1S12, R1D12
1000VDC
500VAC / 60Hz
Isolation Voltage
H-Suffix
3000VDC
H-Suffix
1500VAC / 60Hz
Isolation Capacitance
15pF min. / 70pF max.
10pF min. / 75pF max.
Isolation Resistance
10 GΩ min.
Short Circuit Protection
1 Second
P-Suffix
Continuous
Operating Temperature Range (free air convection)
-40°C to +100°C (see Graph)
Storage Temperature Range
-55°C to +125°C
Reflow Temperature
ROHS compliant
245°C (30 sec), Peak 255°C (5 sec) max.
Vapour Phase Process
(for more details see Application Notes)
230°C (90 sec) max.
Relative Humidity
95% RH
Humidity Susceptibility Test
1000 hrs / 90% humidity / +85°C ambient
Package weight
R1S
1.0g
R1S8
1.1g
R1S12, R1D, R1D10, R1D12
1.2g
Packing Quantity
R1S, R1S8
40 pcs per Tube
R1S12, R1D, R1D10, R1D12
33 pcs per tube
All Types
500 pcs per Reel
MTBF (+25°C) Detailed Information see
using MIL-HDBK 217F
4275 x 103 hours
Application Notes chapter "MTBF"
(+85°C)
using MIL-HDBK 217F
1365 x 103 hours
CERTIFICATIONS
CB Test Report
Report: US/14402A/UL
IEC 60950-1:2001 1st Ed.
UL General Safety Report: E358085
UL 60950-1 2nd Ed.
CUL General Safety
C22.2 No. 60950-1-03
EN Medical Safety Report: MDD1205098-2 + RM1205098-2
IEC/EN 60601-1 3rd Edition
Medical Report + ISO14971 Risk Assessment
EN General Safety
Report: SPCLVD1211033-3
EN60950-1: 2006 + A12:2011
Conducted / Radiated Emissions
EN55022
Level A
Notes
Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under
.
1 second without damage to the converter.
Derating-Graphs
(Ambient Temperature)
R1S-0505, R1D-0505
100
80
Output Power (%)
Isolation Voltage
60
Safe Operating Area
40
20
0
-40
0
50
150
100
105
Operating Temperature °C
}
R1S-R1D
The derating graphs are valid
only for the part numbers shown.
Typical Characteristics
R1S**-xx05
Efficiency / Load
Tolerance Envelope
+5%
60
– 1%
40
10%
50%
80
0% 20%
40%
60%
Total Output current (%)
80%
100%
Deviation from Nominal (%)
20.000
15.000
0
20.000
3.305
0505
5.000
-5.000
-10.000
0% 20%
40%
60%
Total Output current (%)
80%
100%
80%
100%
25.000
10.000
0.000
3.305
20
Deviation / Load
25.000
Output Load Current (%)
1205
40
20
0
0505
60
0505
Deviation / Load
100%
www.recom-international.com
1205
3.305
Deviation from Nominal (%)
Output Voltage
– 5%
Efficiency %
V Nom.
ad Line
100
Efficiency %
80
Typical L
o
Efficiency / Load
100
+10%
+5%
R1D**-xx05
1205
0% 20%
40%
60%
Total Output current (%)
80%
REV: 1/2013
100%
15.000
3.305
0505
10.000
5.000
0.000
-5.000
-10.000
1205
0% 20%
40%
60%
Total Output current (%)
E-25
R1S_R1D
Series
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
Note: /H option is available in
these pin packages
5 PIN Single SMD Package
12.75
15.24
10.7
8
6.7
10
5
RECOM
R1S-xxxx
xxxx
7.0
2.54 x 3
3rd angle
projection
6 PIN Dual SMD Package
7
RECOM
R1D-xxxx
xxxx
4
1 2
8.50
11.10
10.7
1 2
7.0
6.7
4 5
2.54x4
8.50
11.10
Pin Connections
Recommended Footprint Details
Pin #
0.50
Bottom View
2.54
8
5
1 2
4
Top View
12.00
1.20
1.80
Single
Dual
1
–Vin
–Vin
2
+Vin
+Vin
4
–Vout
Com
5
+Vout
–Vout
7
No Pin
+Vout
8
NC
No Pin
10
No Pin
NC
Recommended Footprint Details
0.50
12.00
Bottom View
2.54
10
7
Top View
1 2
4 5
1.80
1.20
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
R1S-R1D
8 PIN Single SMD Package
12.75
6.7
Note: /H option is not available in
these pin packages
15.24
10.7
7.0
2.54 x 3
3rd angle
projection
10 PIN Dual SMD Package
8.50
11.10
8 7 6 5
10 9 8 7 6
RECOM
R1S8-xxxx
xxxx
RECOM
R1D10-xxxx
xxxx
1 2 3 4
1 2 3 4 5
10.7
7.0
6.7
2.54x4
8.50
11.10
Pin Connections
Recommended Footprint Details
0.50
Bottom View
2.54
12.00
Pin #
Single
Dual
1
–Vin
–Vin
D(isol)
–Vin
2
+Vin
+Vin
+Vin
3
NC
NC
-
8 7 6 5
4
–Vout
Com
–Vout1
1 2 3 4
5
+Vout
–Vout
+Vout1
6
NC
NC
–Vout2
7
NC
+Vout
+Vout2
8
NC
NC
-
9
-
NC
-
10
-
NC
NC
1.20
Top View
1.80
Recommended Footprint Details
0.50
Bottom View
2.54
12.00
10 9 8 7 6
1.20
Top View
1 2 3 4 5
1.80
NC = No Connection
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
e.g. R1S-0505, R1S-0505/H, R1S-0505/HP
e.g. R1S8-0505, R1S8-0505/P
R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
e.g. R1D-0505, R1D-0505/H, R1D-0505/HP
e.g. R1D10-0505, R1D10-0505/P
E-26
REV: 1/2013
www.recom-electronic.com
R1S_R1D
Series
ECONOLINE
DC/DC-Converter
Package Style and Pinning (mm)
10.7
15.24
12 11 10
8 7
RECOM
R1S_R1D12-xxxx
xxxx
5 6
1 2 3
3rd angle
projection
Note: /H option is available in
this pin package
12 PIN Single and Dual SMD Package
Pin Connections
6.7
Pin #
7.0
8.50
11.10
2.54x5
Recommended Footprint Details
Separation
> 3.8 mm
0.55
Bottom View
Single
Dual
1
–Vin
–Vin
2
+Vin
+Vin
3
NC
NC
5
–Vout
Com
6
NC
–Vout
7
NC
NC
8
+Vout
+Vout
10
NC
NC
11
NC
NC
12
NC
NC
NC = No Connection
12.00
12 1110
8 7
1 2 3
5 6
Top View
1.20
R1S** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
R1D** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
1.80
e.g. R1S12-0505, R1S12-0505/H, R1S12-0505/HP
e.g. R1D12-0505, R1D12-0505/H, R1D12-0505/HP
R1S-R1D
EMC Filtering - Suggestion for EN55022 Class B (Conducted and Emitted)
470pF/4kVDC
L1
Input
+
DC
Output
C1
DC
470pF/4kVDC
+Vout
L1
Input
+
DC
C1
DC
www.recom-international.com
Com
-Vout
REV: 1/2013
Standard and /H versions
C1
L1
Vin
4.7µF 3.3µH
3.3V
2.2µF 4.7µH
5V
2.2µF 10µH
9V
2.2µF 10µH
12V
2.2µF 22µH
15V
4.7µF 22µH
24V
/P and /HP versions
C1
L1
Vin
4.7µF 10µH
3.3V
10µF 10µH
5V
4.7µF 22µH
9V
4.7µF 22µH
12V
4.7µF 22µH
15V
10µF 47µH
24V
C1 = MLCC
L1 = SMD Inductor
E-27
Similar pages