Vanlong CO600 Oven controlled crystal oscillator Datasheet

Clipped-Sine & HCMOS OCXO
Oven Controlled Crystal Oscillator
•
Low power consumption
•
Excellent temperature stabilities
•
High stability AT-cut crystal
•
Fast warm-up
CO600
Specifications:
CO-A
Frequency Range:
2.0 MHz or 150.0 MHz
Operating Temperature:
Storage Temperature:
0°C ~ +50°C
-A
-10°C ~ +45°C
-B
-10°C ~ +55°C
-C
-20°C ~ +60°C
-D
-30°C ~ +70°C
-E
-40°C ~ +85°C
Frequency Stability:
Accuracy:
Vs. Temperature:
Short-Term Stability:
Aging Rate:
± 5 x 10-9
± 5 x 10-7
± 1 x 10-7
± 5 x 10-8
± 1 x 10-8
± 5 x 10-9
± 2 x 10-10
± 1 x 10-9
± 5 x 10-7
- 57
- 17
- 58
- 18
- 59
per second
per day
per year max
Output Waveform:
Clipped-Sine Wave, HCMOS
Output Level:
1.0 Vp-p min clipped-sine @ 1KΩ
TTL, HCMOS compatible
Phase Noise:
-100dBc/Hz
-130sBc/Hz
-140dBc/Hz
-145dBc/Hz
Harmonics Distortion:
Supply Voltage:
Supply Current:
Warm-up:
Frequency Adjust:
@ 10 Hz
@ 100 Hz
@ 1 KHz
@ 10 KHz
Pin
-30 dB
+5.0 VDC (± 5%)
+12.0 VDC (± 5%)
Vref
3
Vc/Nc
4
Ground
5
Output
6
Vcc Ground
400mA max at warm-up
100mA max after warm-up at 25°C
4.0 Watts max
±3.0 ppm tuning via ext potentiometer
Other frequencies, stabilities, and operating temperature ranges available.
Consult VTC Support for specific requirements.
2.
Not all combinations of the above, stabilities, and temperature ranges are
available. Consult VTC Support if your requirement is not standard.
3.
All specifications subject to change without notice.
Fax: +86 10 6301 9167
All dimensions are in mm
Ordering Information
1.
June 2001
Vcc
2
-P
Note:
Phone: +86 10 6301 4184
Configurations
1
Product name + Temperature + Stability +
Frequency + Other Specification Code.
i.e. CO600C18-10.0MHz
or CO600D58P-10.0MHz
Email: [email protected]
Web: http://www.vanlong.com
Vanlong Technology Co., Ltd.
Similar pages