To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. HD74LVCZ16244A 16–bit Buffers / Line Drivers with 3–state Outputs REJ03D0374–0200 (Previous ADE-205-232 (Z)) Rev.2.00 Aug. 19, 2004 Description The HD74LVCZ16244A has sixteen line drivers with three state outputs in a 48 pin package. This device is a non inverting buffer and has four active low enables (1G to 4G). Each enable independently controls four buffers. When VCC is between 0 and 1.5 V, the device is in the high impedance state during power up or power down. Low voltage and high-speed operation is suitable at battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • • • • • VCC = 2.7 to 5.5 V All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V) All outputs VO (Max) = 5.5 V (@VCC = 0 V or output off state) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High impedance state during power up and power down Power off disables outputs, permitting live insertion High output current ±24 mA (@VCC = 3.0 to 5.5 V) Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74LVCZ16244ATEL TSSOP–48 pin TTP–48DBV T EL (1,000 pcs/reel) Function Table Inputs G A Output Y H L X H Z H L L L H: High level L: Low level X: Immaterial Z: High impedance Rev.2.00 Aug. 19, 2004 page 1 of 7 HD74LVCZ16244A Pin Arrangement 1G 1 48 2G 1Y1 2 47 1A1 1Y2 3 46 1A2 GND 4 45 GND 1Y3 5 44 1A3 1Y4 6 43 1A4 VCC 7 42 VCC 2Y1 8 41 2A1 2Y2 9 40 2A2 GND 10 39 GND 2Y3 11 38 2A3 2Y4 12 37 2A4 3Y1 13 36 3A1 3Y2 14 35 3A2 GND 15 34 GND 3Y3 16 33 3A3 3Y4 17 32 3A4 VCC 18 31 VCC 4Y1 19 30 4A1 4Y2 20 29 4A2 GND 21 28 GND 4Y3 22 27 4A3 4Y4 23 26 4A4 4G 24 25 3G (Top view) Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage Input voltage Output voltage VCC VI VO V V V Input diode current Output diode current Output current VCC, GND current Storage temperature IIK IOK IO ICC or IGND Tstg –0.5 to 7.0 –0.5 to 7.0 –0.5 to 7.0 –0.5 to VCC+0.5 –50 –50 ±50 ±100 –65 to 150 mA mA mA mA °C Conditions Output “Z” or VCC : OFF Output “H” or “L” VI < 0 VO < 0 Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.2.00 Aug. 19, 2004 page 2 of 7 HD74LVCZ16244A Recommended Operating Conditions Item Symbol Ratings Unit Conditions Supply voltage Input voltage Output voltage VCC VI VO V V V At operation Output current IOH 2.7 to 5.5 0 to 5.5 0 to 5.5 0 to VCC –12 –24 *1 12 24 *1 0 to 6 –40 to +85 IOL Input rise / fall time Operating temperature Note: tr, tf Ta mA mA Output “Z” or VCC : OFF Output “H” or “L” VCC = 2.7 V VCC = 3.0 to 5.5 V VCC = 2.7 V VCC = 3.0 to 5.5 V ns / V °C 1. Duty cycle ≤ 50% Logic Diagram 1G 1A1 1A2 1A3 1A4 3G 3A1 3A2 3A3 3A4 1 2G 47 2 46 3 44 5 43 6 1Y1 2A1 1Y2 2A2 1Y3 2A3 1Y4 2A4 25 4G 36 13 35 14 33 16 32 17 Rev.2.00 Aug. 19, 2004 page 3 of 7 3Y1 4A1 3Y2 4A2 3Y3 4A3 3Y4 4A4 48 41 8 40 9 38 11 37 12 2Y1 2Y2 2Y3 2Y4 24 30 19 29 20 27 22 26 23 4Y1 4Y2 4Y3 4Y4 HD74LVCZ16244A Electrical Characteristics (Ta = –40 to 85°C) Item Symbol VCC (V) Min Typ Max Unit Input voltage VIH 2.0 VCC×0.7 — — VCC–0.2 2.2 2.4 2.2 3.8 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 0.8 VCC×0.3 — — — — — 0.2 0.4 0.55 0.55 ±5 ±5 ±5 ±5 ±5 225 350 500 V ∆ICC 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 5.5 2.7 3.0 3.0 4.5 2.7 to 5.5 2.7 3.0 4.5 0 to 5.5 2.7 to 5.5 0 to 1.5 1.5 to 0 0 2.7 to 3.6 2.7 to 5.5 2.7 to 3.6 CIN CO 3.3 3.3 — — 4.1 8.1 — — pF pF VIL Output voltage VOH VOL Input current Off state output current Output leak current Quiescent supply current Input capacitance Output capacitance Note: IIN IOZ IOZPU IOZPD IOFF ICC Test Conditions V V IOH = –100 µA IOH = –12 mA IOH = –24 mA V IOL = 100 µA IOL = 12 mA IOL = 24 mA µA µA VIN = 0 to 5.5 V VOUT = 0 to 5.5 V VOUT = 0.5 to 5.5 V, Output enable = don’t care µA µA VIN or VO = 5.5 V VIN = 3.6 to 5.5 V *1, IO = 0 VIN = VCC or GND µA VIN = one input at (VCC–0.6) V, other inputs at VCC or GND VIN = VCC or GND VOUT = VCC or GND 1. This applies in the disabled state only. Switching Characteristics (Ta = –40 to 85°C) TO (Output) Item Symbol VCC (V) Min Typ Max Unit FROM (Input) Propagation delay time tPLH tPHL ns G Y tHZ tLZ 4.7 4.1 3.8 5.8 4.6 4.4 6.2 5.8 4.6 — 1.0 1.0 Y Output disable time — — — — — — — — — — — — A tZH tZL — 1.1 — — 1.0 — — 1.8 — — — — ns Output enable time 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 ns G Y Between output pin skew *1 tOSLH tOSHL Note: 1. This parameter is characterized but not tested. tOSLH = |tPLHm–tPLHn|, tOSHL = |tPHLm–tPHLn| Rev.2.00 Aug. 19, 2004 page 4 of 7 ns HD74LVCZ16244A Test Circuit VCC VCC Output Input Pulse generator Zout = 50 Ω See Function Table 1G to 4G 500 Ω 1Y1 to 4Y4 1A1 to 4A4 C L= 50 pF 450 Ω Note: 1. C L includes probe and jig capacitance. OPEN See under table *1 GND 50 Ω Scope Symbol Rev.2.00 Aug. 19, 2004 page 5 of 7 S1 S1 Vcc=2.7V, 3.3±0.3V Vcc=5.0±0.5V t PLH / t PHL OPEN OPEN t ZH/ t HZ t ZL / t LZ GND 6V GND 2×VCC HD74LVCZ16244A • Waveforms – 1 tr tf 90 % Vref Input A VIH 90 % Vref 10 % 10 % GND t PHL t PLH VOH Output Y Vref Vref VOL • Waveforms – 2 tf Input G tr 90 % Vref VIH 90 % Vref 10 % t ZL 10 % GND t LZ ≈VOH1 Waveform – A Vref t ZH Waveform – B Vref VOL + 0.3 V VOL t HZ VOH VOH – 0.3 V ≈VOL1 TEST VIH Vref Vcc=2.7V, 3.3±0.3V 2.7 V 1.5 V Vcc=5.0±0.5V VCC VOH1 3V 50%VCC VCC VOL1 GND GND Notes: 1. Input waveform : PRR = 10 MHz, duty cycle 50%, t r = 2.5 ns, t f = 2.5 ns 2. Waveform – A shows input conditions such that the output is “L” level when enabled by the output control. 3. Waveform – B shows input conditions such that the output is “H” level when enabled by the output control. Rev.2.00 Aug. 19, 2004 page 6 of 7 HD74LVCZ16244A Power up / down Characteristics 4.0 Ta = 25˚C Output enable = “L” VOUT (V) 3.0 2.0 Disable area Enable area 1.0 0 0 1.0 2.0 3.0 4.0 VCC (V) Package Dimensions As of January, 2002 12.5 12.7 Max Unit: mm 25 6.10 48 1 *0.19 ± 0.05 0.50 24 0.08 M 1.0 8.10 ± 0.20 0.65 Max *Pd plating Rev.2.00 Aug. 19, 2004 page 7 of 7 0.10 ± 0.05 0.10 *0.15 ± 0.05 1.20 Max 0˚ – 8˚ 0.50 ± 0.1 Package Code JEDEC JEITA Mass (reference value) TTP–48DBV — — 0.20 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0