DIODE MODULE DD90F/KD90F UL;E76102 （M） Power Diode Module DD90F series are designed for various rectifier circuits. DD90F has two diode chips connected in series in 25mm (1inch) width package and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1600V is avaiable for various input voltage. 2- 6 92 20 20 ● Isolated 25 12.5 12 mounting base elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability 20 ● Two DD ３ ２ １ 6.5 31max 19.5 4.0 （Applications） Various rectifiers, Battery chargers, DC motor drives M5X10 80±0.2 ２ ３ １ KD Unit：a ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Item Ratings DD90F40 DD90F80 DD90F120 DD90F160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V Ratings Unit Symbol Item Conditions IF（AV） Average Forward Current Single phase, half wave, 180°conduction, Tc：93℃ IF (RMS) R.M.S. Forward Current Single phase, half wave, 180°conduction, Tc：93℃ IFSM Surge Forward Current 1 ／2 cycle, It Value for one cycle of surge current It 2 VISO 2 50/60HZ, peak value, non-repetitive Isolation Breakdown Voltage（R.M.S） A.C.1minute 90 A 140 A A 2100/2300 22000 A2S 2500 V Tj Junction Temperature −40 to ＋125 ℃ Tstg Storage Temperature −40 to ＋125 ℃ N･m （㎏f･B） Mounting Torque Mounting（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Mass 170 g ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave. Tj＝125℃ VFM Forward Voltage Drop, max. Forward current 285A，Tj＝25℃，Inst. measurement Junction to case 0.27 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions Ratings Unit 20 mA 1.40 V ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DD90F/KD90F Average Forward Current vs. Power Dissipation Maximum Forward Characteristics ２００ Power Dissipation Pav（W） 10３ Forward Current I（A） F ５ Per one element D.C. １５０ ２ 10２ Single Phase Three Phase １００ ５ ２ １０１ ５ ０ １ ２ ３ ４ Max. ５０ ０ ０ ５ ２０ Average Forward Current vs. Allowable Case Temperature １１０ ７０ D.C. Three Phase ８０ Single Phase １００ ９０ ６０ ５０ ０ ２０ ４０ ６０ ８０ １００ １２０ Transient Thermal Impedance θj-c（℃/W） １００ １２０ １４０ １６０ １４０ Per one element ２５００ Ｔ ｊ=２５℃ start ２０００ １５００ 60Hz １０００ 50Hz ５００ ００ １０ １６０ ２ Average Forward Current（A） ０.５ ８０ ３０００ Per one element １２０ ６０ Cycle Surge Forward Current Rating （Non-Repetitive） Surge Forward Current（A） Allowable Case Temperature Tc（℃） １３０ ４０ Average Forward Current（A） Forward Voltage Drop（V） ５ １０１ ２ １０２ ５ Time（Cycles） Transient Thermal Impedance Per one element Junction to Case ０.４ ０.３ ０.２ ０.１ １０１ １０２ １０３ １０４ B２；Two Pluse Bridge connection Id（Av） Rth:1.0℃/W Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W ６００ B2 ４００ ９０ １００ １１０ ２００ １２０ ０ １００ ２００ Output Current（A） ０ ４０ ８０ １２０ Ambient Temperature（℃） １２５ ８００ Output Current B６；Six pulse Bridge connection ９０ Id(AV) Rth:1.0℃/W Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W B6 ６００ １００ ４００ １１０ ２００ １２０ ０ １００ ２００ ０ ４０ ８０ １２０ １２５ Allowable Case Temperature（℃） １００ Time t（sec） Total Power Dissipation（W） １０ー１ Output Current Total Power Dissipation（W） ８００ １０ー２ Allowable Case Temperature（℃） ０ ー３ １０ Output Current（A） Ambient Temperature（℃） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]