ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP " JC Snap-in Terminal Type series Excellent in voltage holding property. Suitable for quick charge and discharge. Wild temperature range (– 25°C to + 60°C). Adapted to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range – 25 to +60°C Rated Voltage Range 2.5V Rated Capacitance Range 15 to 150F Capacitance Tolerance ± 20% (20°C) Leakage Current 0.5C (mA) [ C : Rated Capacitance(F) ] ( After 30 minutes' application of rated voltage, 2.5V) Stability at Low Temperature Capacitance ( – 25°C) / Capacitance ( +20°C) ×100 ESR, DCR* Refer to the list below (20°C). * DC internal resistance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 60°C. Capacitance change Within ±30% of initial value Endurance ESR 300% or less of initial specified value Leakage current Less than or equal to the initial specified value The specifications listed at right shall be met when the capacitors are restored to 20°C after storing the capacitors under no load for 2000 hours at 60°C. Capacitance change Within ±30% of initial value ESR 300% or less of initial specified value Leakage current Less than or equal to the initial specified value Shelf Life Marking See Note 70% Printed with white color letter on black sleeve. Type numbering system (Example : 2.5V 150F) Drawing Polarity bar Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 φD +1MAX. J J C 0 E 1 5 7 M E L C Case dia. code 10 L±2 Configuration Capacitance tolerance (±20%) 4.0±0.5 Pressure relief vent Rated Capacitance (150F) 0.8 +0.2 -0.1 10± 0 .1 Rated voltage (2.5V) .2 +0 .1 -0 Code Z A B C Series name Type 2.5 4.0 ± 0.5 0.8 φD 22 25 30 35 2- 2 φ ±0.1 1.5 (PC board hole dimensions) +0.2 -0.1 (Terminal dimensions) Dimensions Rated Voltage ( code ) 2.5V (0E) Cap. (F) Cap. code ESR(mΩ) DCR(mΩ) (at 1kHz ) φ 22 (Z) 22 × 20 15 156 120 500 18 186 120 400 22 226 90 300 27 276 90 250 33 336 80 200 39 396 80 200 22 × 35 47 476 70 160 22 × 40 56 566 70 140 68 686 60 110 82 826 60 100 100 107 50 90 120 127 50 70 150 157 40 60 Case size φ D × L (mm) φ 25 (A) φ 30 (B) φ 35 (C) 25 × 20 30 × 20 22 × 30 30 × 20 25 × 30 35 × 20 25 × 30 35 × 20 Note : The capacitance calculated from discharge time (∆T) with constant current ( i ) after 30minuite charge with rated voltage (2.5V). The discharge current ( i ) is 0.01 × F (rated capacitance). A discharge time (∆T) measured between 2V and 1V with constant current. The capacitance calculated bellow. Capacitance (F) = i × ∆T 25 × 35 25 × 40 30 × 30 25 × 50 30 × 40 35 × 30 35 × 35 30 × 50 35 × 40 35 × 50 CAT.8100X