MA-COM MAADSS0009 Digital attenuator, 30 db, 4-bit Datasheet

MAADSS0009
Digital Attenuator, 30 dB, 4-Bit
DC - 2.0 GHz
Functional Schematic
Features










Rev. V1
Attenuation 2-dB Steps to 30 dB
High Accuracy
Low Intermodulation Product: +50 dBm IP3
Low DC Power Consumption: 50 µW
Temperature Stability +/-0.15 dB: -40°C to +85°C
Lead-Free SOIC-16 Plastic Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of AT-220
RF1
16
GND
GND
GND
15
14
13
16 dB
GND GND
12
8 dB
GND
RF2
10
9
11
4 dB
2 dB
Description
M/A-COM’s MAADSS0009 is a 4-bit, 2-dB step
GaAs MMIC digital attenuator in a lead-free SOIC
16-lead surface mount plastic package. The
MAADSS0009 is ideally suited for use where high
accuracy, fast switching, very low power
consumption and low intermodulation products are
required. Typical applications include radio and
cellular equipment, wireless LANs, GPS equipment
and other Gain/Level Control circuits.
MAADSS0009
Lead-Free SOIC 16-Lead
MAADSS0009TR-3000
3000 piece reel
3
4
5
6
7
8
VC1
VC1
VC2
VC2
VC3
VC3
VC4
VC4
Pin No.
Function
Pin No.
Function
1
VC1
9
RF2
2
VC1
10
GND
3
VC2
11
GND
4
VC2
12
GND
5
VC3
13
GND
6
VC3
14
GND
7
VC4
15
GND
8
VC4
16
RF1
Ordering Information1
Package
2
Pin Configuration
The MAADSS0009 is fabricated with a monolithic
GaAs MMIC using a mature 1-micron process. The
process features full chip passivation for increased
performance and reliability.
Part Number
1
Absolute Maximum Ratings 2,3
1. Reference Application Note M513 for reel size information.
Parameter
Absolute Maximum
Input Power
50 MHz
500-2000 MHz
+27 dBm
+34 dBm
Control Voltage
-8.5 V  VC  5V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAADSS0009
Digital Attenuator, 30 dB, 4-Bit
DC - 2.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, VC = 0 V / -5 V, Z0 = 50 
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss (reference state)
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
dB
dB
dB
—
—
—
1.5
1.6
1.8
1.7
1.8
2.1
Attenuation Accuracy 4
DC - 1.0 GHz
DC - 2.0 GHz
± (0.15 dB + 3% of Atten Setting in dB) dB
± (0.30 dB + 4% of Atten Setting in dB) dB
VSWR
Ratio
—
1.2:1
—
Trise, Tfall
10% to 90% RF, 90% to 10% RF
nS
—
12
—
Ton, Toff
50% Control to 90% RF,
50% Control to 10% RF
nS
—
18
—
Transients
In-Band
mV
—
25
—
1 dB Compression
Input Power, 0.05 GHz
Input Power, 0.5 - 2.0 GHz
dBm
dBm
—
—
20
28
—
—
IP2
Measured Relative to Input Power
(For two-tone input power up to +5 dBm)
0.05 GHz
0.5 - 2.0 GHz
dBm
dBm
—
—
45
68
—
—
IP3
Measured Relative to Input Power
(For two-tone input power up to +5 dBm)
0.05 GHz
0.5 - 2.0 GHz
dBm
dBm
—
—
40
50
—
—
Control Current
|VC| = 5 V
A
—
100
4. Attenuation accuracy specifications apply with negative bias control and low inductance grounding.
Lead-Free SOIC-16†
Truth Table 5
Control Inputs
VC
4
VC VC VC VC VC VC VC
4
3
3
2
2
1
1
Attenution
(dB)
1
0
1
0
1
0
1
0
Reference
State
0
1
1
0
1
0
1
0
2 dB
1
0
0
1
1
0
1
0
4 dB
1
0
1
0
0
1
1
0
8 dB
1
0
1
0
1
0
0
1
16 dB
0
1
0
1
0
1
0
1
30 dB
5. 0 = -0.2 V to 0 V, 1 = -8 V to -5 V.
† Reference Application Note M538 for lead-free solder reflow
recommendations.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAADSS0009
Digital Attenuator, 30 dB, 4-Bit
DC - 2.0 GHz
Rev. V1
Typical Performance Curves
Attenuation
Insertion Loss
3
0
-5
2
-10
-15
1
+25°C
-40°C
+85°C
-20
-25
0
0.0
-30
0.5
1.0
1.5
2.0
0.0
0.5
Frequency (GHz)
1.0
1.5
2.0
Frequency (GHz)
Attenuation Accuracy
VSWR
1.5
2.0
IL
2 dB
4 dB
8 dB
16 dB
1.8
AttenDev 2
AttenDev4
Attendev8
AttenDev16
AttenDev30
1.0
0.5
1.6
0.0
1.4
-0.5
1.2
-1.0
1.0
0.0
0.5
1.0
Frequency (GHz)
1.5
2.0
-1.5
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAADSS0009
Digital Attenuator, 30 dB, 4-Bit
DC - 2.0 GHz
Rev. V1
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
Similar pages