BAV17, BAV18, BAV19, BAV20, BAV21 www.vishay.com Vishay Semiconductors Small Signal Switching Diodes, High Voltage FEATURES • Silicon epitaxial planar diodes • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • General purposes MECHANICAL DATA Case: DO-35 Weight: approx. 125 mg Cathode band color: black Packaging codes/options: TR/10K per 13" reel (52 mm tape), 50K/box TAP/10K per ammopack (52 mm tape), 50K/box PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE TYPE MARKING INTERNAL CONSTRUCTION REMARKS Tape and reel/ammopack BAV17 VRRM = 25 V BAV17-TR or BAV17-TAP BAV17 Single diode BAV18 VRRM = 60 V BAV18-TR or BAV18-TAP BAV18 Single diode Tape and reel/ammopack BAV19 VRRM = 120 V BAV19-TR or BAV19-TAP BAV19 Single diode Tape and reel/ammopack BAV20 VRRM = 200 V BAV20-TR or BAV20-TAP BAV20 Single diode Tape and reel/ammopack BAV21 VRRM = 250 V BAV21-TR or BAV21-TAP BAV21 Single diode Tape and reel/ammopack ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Repetitve peak reverse voltage Reverse voltage Forward continuous current Peak forward surge current Forward peak current Power dissipation Rev. 1.8, 02-Aug-12 PART SYMBOL VALUE UNIT BAV17 VRRM 25 V BAV18 VRRM 60 V BAV19 VRRM 120 V BAV20 VRRM 200 V BAV21 VRRM 250 V BAV17 VR 20 V BAV18 VR 50 V BAV19 VR 100 V BAV20 VR 150 V BAV21 VR 200 V IF 250 mA tp = 1 s, Tj = 25 °C IFSM 1 A f = 50 Hz IFRM 625 mA Ptot 500 mW Document Number: 85543 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAV17, BAV18, BAV19, BAV20, BAV21 www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air TEST CONDITION SYMBOL VALUE UNIT l = 4 mm, TL = constant RthJA 300 K/W Tj 175 °C Tstg - 65 to + 175 °C Junction temperature Storage temperature range ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Forward voltage PART IF = 100 mA Reverse current Diode capacitance MIN. TYP. UNIT 1000 mV BAV17 IR 100 nA VR = 50 V BAV18 IR 100 nA VR = 100 V BAV19 IR 100 nA VR = 150 V BAV20 IR 100 nA VR = 200 V BAV21 IR 100 nA Tj = 100 °C, VR = 20 V BAV17 IR 15 μA Tj = 100 °C, VR = 50 V BAV18 IR 15 μA Tj = 100 °C, VR = 100 V BAV19 IR 15 μA Tj = 100 °C, VR = 150 V BAV20 IR 15 μA Tj = 100 °C, VR = 200 V BAV21 IR 15 μA BAV17 V(BR) 25 V BAV18 V(BR) 60 V BAV19 V(BR) 120 V BAV20 V(BR) 200 V BAV21 V(BR) 250 V VR = 0 V, f = 1 MHz, CD 1.5 pF IF = 10 mA rf 5 IF = IR = 30 mA, iR = 3 mA RL = 100 trr Differential forward resistance Reverse recovery time MAX. VF VR = 20 V IR = 5 μA, tp/T = 0.01, tp = 0.3 ms Breakdown voltage SYMBOL 50 ns TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1000 100 I F - Forward Current (mA) I R - Reverse Current (µA) 1000 Scattering Limit 10 1 VR = VRRM 0.1 0.01 Tj = 25 °C 100 Scattering Limit 10 1 0.1 0 94 9084 40 80 120 160 200 Tj - Junction Temperature (°C) Fig. 1 - Reverse Current vs. Junction Temperature Rev. 1.8, 02-Aug-12 0 94 9085 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Fig. 2 - Forward Current vs. Forward Voltage Document Number: 85543 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BAV17, BAV18, BAV19, BAV20, BAV21 rf - Differential Forward Resistance (Ω) www.vishay.com Vishay Semiconductors 1000 100 Tj = 25 °C 10 1 0.1 1 10 100 I F - Forward Current (mA) 94 9089 Fig. 3 - Differential Forward Resistance vs. Forward Current PACKAGE DIMENSIONS in millimeters (inches): DO-35 3.9 max. [0.154] 3.1 min. [0.120] 26 min. [1.024] 1.3 [0.050] 26 min. [1.024] 1.7 [0.067] Ø 0.4 min. [0.015] Ø 0.6 max. [0.024] Cathode Identification Rev. 6 - Date: 19. December 2011 Document no.: SB-V-3906.04-031(4) 94 9366 Rev. 1.8, 02-Aug-12 Document Number: 85543 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000