Fujitsu FTR-K1CK005E-MB-RG Power relay 1 pole - 16a/12a/10a transparent cover Datasheet

FTR-K1 SERIES
POWER RELAY
1 POLE - 16A/12A/10A Transparent cover
FTR-K1 Series
n FEATURES
16A, 12A, 10A versions
Transparent cover
l Low profile (height: 15.7mm)
l High insulation
Insulation distance (between coil and contacts): 10mm min.
Dielectric strength: 5KV
Surge strength: 10KV
l UL F class isolation wire
l Low coil power (400mW)
l Cadmium free contacts
l Safety standards
UL, CSA, VDE, SEMKO approved
UL, CSA TV-5 rating approved (1 form A type)
l RoHS compliant
Please see page 13 for more information
l
l
n PARTNUMBER INFORMATION
FTR-K1
[Example]
(a)
C
(b)
K 005 W - MA - RG (c) (d) (e) (f) (g) (a)
Relay type
FTR-K1: FTR-K1 Series
(b)
Contact configuration
A
C
: 1 form A (SPST-NO)
: 1 form C (SPDT) (standard type "K" only)
(c)
Coil type
K
L
: Standard type (400mW) / flux free
: High sensitive (250mW) / flux free
(d)
Coil rated voltage
005
: 5.....48 VDC
Coil rating table at page 7
(e)
Contact material
W
T
E
(f)
(g)
Contact rating/Terminal pitch
Special type
Nil
MA
MB
LA
LB
RG
: AgSnO2 (applicable for 1 form C)
: AgSnO2 (applicable for 16A, 1 form A) (TV-5)
: AgNi (90/10)
: 16A, 5mm pitch
: 12A and 3.5mm ptich
: 12A and 5.0mm pitch
: 10A and 3.5mm pitch
: 10A and 5.0mm pitch
: Transparent cover
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-K1CK005W
Actual marking: K1CK005W ("RG" is marked on the relay)
FTR-K1SERIES
SERIES
FTR-K1
n SPECIFICATION
16A type
Item
Contact
Data
FTR-K1 AK ( ) (T,W)-RG FTR-K1 CK ( ) (W,E)-RG
Configuration
1 form A
Construction
Single
Material
T, W: AgSnO2 , E: AgNi
Resistance (initial)
Maximum 100mΩ at 1A, 6VDC
Contact rating (resistive)
Max. carrying current
Life
16A, 250VAC / 24VDC
*1
16A
Max. switching voltage
440VAC / 300VDC
Max. switching power
4,000VA / 384W
Min. switching load
*2
10mA, 5VDC
20 x 106 operations minimum
Mechanical
AC contact rating
100 x 103 operations
minimum
50 x 103 operations
minimum
DC contact rating
100 x 103 operations
minimum
30 x 103 operations
minimum
Electrical
Coil Data
Timing Data
Insulation
Rated power (20 °C)
400mW (430mW at 48V coil)
Operate power (20 °C)
200mW (210mW at 48V coil)
Operating temperature range
-40 °C to +70 °C (no frost)
Operate (at nominal voltage)
≤ 15ms (no bounce, no diode)
Release (at nominal voltage)
≤ 5ms (no bounce, no diode)
Resistance (initial)
≥ 1,000MOhm at 500VDC
Dielectric strength
Surge strength
Open contacts
1,000VAC (50/60Hz) 1min
Contacts to coil
5,000VAC (50/60Hz) 1min
Coil to contacts
10,000V / 1.2 x 50µs standard wave
Clearance
10mm
Creepage
10mm
EN61810-1, VDE0435
Other
1 form C
Vibration resistance
Shock
Weight
Voltage
250V
Pollution degree
3
Material group
III a
Category
C / 250V (Reference voltage) (VDE0110b)
Misoperation≥1us 10 to 55Hz double amplitude 0.7mm
Endurance
10 to 55Hz double amplitude 1.5mm
Misoperation≥1us 100m/s² (11 ± 1ms)
Endurance
1,000m/s² (6 ± 1ms)
Approximately 13g
* 1: Need to consider the heat from PCB when max. current is more than 10A.
* 2: Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
FTR-K1
FTR-K1SERIES
SERIES
n SPECIFICATION
12A type
Item
Contact
Data
FTR-K1 AK ( ) (W, E)
- (MA, MB) - RG
Configuration
1 form A
Construction
Single
Material
W: AgSnO2 , E: AgNi
Resistance (initial)
Maximum 100mΩ at 1A, 6VDC
Contact rating (resistive)
Max. carrying current
Coil Data
Timing Data
Insulation
440VAC / 300VDC
3,000VA / 288W
*2
10mA, 5VDC
20 x 106 operations minimum
Mechanical
AC contact rating
100 x 103 operations minimum
DC contact rating
100 x 103 operations minimum
Rated power (20 °C)
400mW (430mW at 48V coil)
Operate power (20 °C)
200mW (210mW at 48V coil)
Operating temperature range
-40 °C to +70 °C (no frost)
Operate (at nominal voltage)
≤ 15ms (no bounce)
Release (at nominal voltage)
≤ 5ms (no bounce, no diode)
Resistance (initial)
≥ 1,000MOhm at 500VDC
Dielectric strength
Surge strength
Open contacts
1,000VAC (50/60Hz) 1min
Contacts to coil
5,000VAC (50/60Hz) 1min
Coil to contacts
10,000V / 1.2 x 50µs standard wave
Clearance
10mm
Creepage
10mm
EN61810-1, VDE0435
Other
14A
Max. switching power
Electrical
1 form C
12A, 250VAC / 24VDC
*1
Max. switching voltage
Min. switching load
Life
FTR-K1 CK ( ) (W, E)
- (MA, MB) - RG
Vibration resistance
Shock
Weight
Voltage
250V
Pollution degree
3
Material group
III a
Category
C / 250V (Reference voltage) (VDE0110b)
Misoperation≥1us 10 to 55Hz double amplitude 0.7mm
Endurance
10 to 55Hz double amplitude 1.5mm
Misoperation≥1us 100m/s² (11 ± 1ms)
Endurance
1,000m/s² (6 ± 1ms)
Approximately 13g
* 1: Need to consider the heat from PCB when max. current is more than 10A.
* 2: Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
FTR-K1
FTR-K1SERIES
SERIES
n SPECIFICATION
10A type
Item
Contact
Data
Life
FTR-K1 AL ( ) (W, E) - (LA, LB) - RG
Configuration
1 form A
Construction
Single
Material
W: AgSnO2 , E: AgNi
Resistance (initial)
Maximum 100mΩ at 1A, 6VDC
Contact rating (resistive)
10A, 250VAC / 24VDC
Max. carrying current
10A
Max. switching voltage
440VAC
Max. switching power
2,500VA
Min. switching load *
10mA, 5VDC
Mechanical
20 x 106 operations minimum
Electrical
Coil Data
Timing Data
Insulation
100 x 103 operations minimum
Rated power (20 °C)
250mW
Operate power (20 °C)
141mW
Operating temperature range
-40 °C to +70 °C (no frost)
Operate (at nominal voltage)
≤ 15ms (no bounce, no diode)
Release (at nominal voltage)
≤ 5ms (no bounce, no diode)
Resistance (initial)
≥ 1,000MOhm at 500VDC
Dielectric strength
Surge strength
Open contacts
1,000VAC (50/60Hz) 1min
Contacts to coil
5,000VAC (50/60Hz) 1min
Coil to contacts
10,000V / 1.2 x 50µs standard wave
Clearance
10mm
Creepage
10mm
EN61810-1, VDE0435
Other
AC contact rating
Vibration resistance
Shock
Weight
Voltage
250V
Pollution degree
3
Material group
III a
Category
C / 250V (Reference voltage) (VDE0110b)
Misoperation≥1us 10 to 55Hz double amplitude 0.7mm
Endurance
10 to 55Hz double amplitude 1.5mm
Misoperation≥1us 100m/s² (11 ± 1ms)
Endurance
1,000m/s² (6 ± 1ms)
Approximately 13g
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
and expected reliability levels.
FTR-K1
FTR-K1SERIES
SERIES
n PART NUMBERS
16A and AgSnO2 contacts
Ordering part number
Contact
FTR-K1AK(...)T-RG
A: 1 form A
FTR-K1CK(...)W-RG
C: 1 form C
Coil power
K: 400mW
Contact material
T: AgSnO2
Current
Special
Nil: 16A
RG: Transparent
cover
W: AgSnO2
16A and AgNi contacts
Ordering part number
Contact
FTR-K1AK(...)E-RG
A: 1 form A
FTR-K1CK(...)E-RG
C: 1 form C
Coil power
Contact material
Current
Special
K: 400mW
E: AgNi
(90/10)
Nil: 16A
RG: Transparent
cover
Coil power
Contact material
Current
Special
K: 400mW
W: AgSnO2
MA: 12A
RG: Transparent
cover
Coil power
Contact material
Current
Special
K: 400mW
E: AgNi
(90/10)
MA: 12A
RG: Transparent
cover
Coil power
Contact material
Current
Special
K: 400mW
W: AgSnO2
MB: 12A
RG: Transparent
cover
12A, 3.5mm pitch and AgSnO2 contacts
Ordering part number
Contact
FTR-K1AK(...)W-MA-RG
A: 1 form A
FTR-K1CK(...)W-MA-RG
C: 1 form C
12A, 3.5mm pitch and AgNi contacts
Ordering part number
Contact
FTR-K1AK(...)E-MA-RG
A: 1 form A
FTR-K1CK(...)E-MA-RG
C: 1 form C
12A, 5.0mm pitch and AgSnO2 contacts
Ordering part number
Contact
FTR-K1AK(...)W-MB-RG
A: 1 form A
FTR-K1CK(...)W-MB-RG
C: 1 form C
(...) = coil voltage
FTR-K1
FTR-K1SERIES
SERIES
n PART NUMBERS
12A, 5.0mm pitch and AgNi contacts
Ordering part number
Contact
FTR-K1AK(...)E-MB-RG
A: 1 form A
FTR-K1CK(...)E-MB-RG
C: 1 form C
Coil power
Contact material
Current
Special
K: 400mW
E: AgNi
(90/10)
MB: 12A
RG: Transparent
cover
10A, 3.5mm pitch and AgSnO2 contacts
Ordering part number
Contact
Coil power
Contact material
Current
Special
FTR-K1AL(...)W-LA-RG
A: 1 form A
L: 250mW
W: AgSnO2
LA: 10A
RG: Transparent
cover
10A, 3.5mm pitch and AgNi contacts
Ordering part number
Contact
Coil power
Contact material
Current
Special
FTR-K1AL(...)E-LA-RG
A: 1 form A
L: 250mW
E: AgNi
(90/10)
LA: 10A
RG: Transparent
cover
10A, 5.0mm pitch and AgSnO2 contacts
Ordering part number
Contact
Coil power
Contact material
Current
Special
FTR-K1AL(...)W-LB-RG
A: 1 form A
L: 250mW
W: AgSnO2
LB: 10A
RG: Transparent
cover
10A, 5.0mm pitch and AgNi contacts
Ordering part number
Contact
Coil power
Contact material
Current
Special
FTR-K1AL(...)E-LB-RG
A: 1 form A
L: 250mW
E: AgNi
(90/10)
LB: 10A
RG: Transparent
cover
(...) = coil voltage
FTR-K1
FTR-K1SERIES
SERIES
n COIL RATING
250 mW coils
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate
Voltage
(VDC) *
Must ReleaseMax. Coil Voltage
Voltage
(VDC)
(VDC) *
005
5
100
3.75
0.5
15
006
6
145
4.5
0.6
18
009
9
325
6.75
0.9
27
012
12
575
9
1.2
36
018
18
1300
13.5
1.8
54
024
24
2310
18
2.4
72
048
48
9216
36
4.8
144
Rated Power
(mW)
250
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
400 mW coils
Coil
Code
Rated Coil
Voltage
(VDC)
Coil Resistance
+/- 10% (Ohm)
Must Operate
Voltage
(VDC) *
Must ReleaseMax. Coil Voltage
Voltage
(VDC)
(VDC) *
005
5
62
3.5
0.5
12.2
006
6
90
4.2
0.6
14.7
009
9
202
6.3
0.9
22
012
12
360
8.4
1.2
29.4
018
18
810
12.6
1.8
44.1
022
22
1210
15.4
2.2
53.9
024
24
1440
16.8
2.4
58.8
028
28
1960
19.6
2.8
68.6
048
48
5360
33.6
4.8
117.6
Rated Power
(mW)
400
430
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
FTR-K1
FTR-K1SERIES
SERIES
n SAFETY STANDARDS
16A type
Type
Compliance
Contact rating
FTR-K1AK ( ) (T,E)-RG
UL
UL 508
E63614
CSA
Flammability: UL 94-VII (plastics)
16A, 24 VAC (resisitive)
16A, 277VAC (resisitive)
20A, 277VAC (resisitive)
1 HP, 277VAC
1/2 HP, 125VAC
TV-5, 120VAC, 120VAC 25,000
cycles
Pilot duty: A300
C22.2 No. 14
0435, 0631, 0700, 0860
40013848
SEMKO
16A, 277 VAC/24VDC (resisitive)
20A, 277VAC (resistive)
1 HP, 277VAC
1/2 HP, 125VAC
1/8 HP, 125VAC
TV-5, 250VAC 25,000 cycles
Pilot duty: B300
16A, 277 VAC/24VDC (resisitive)
20A, 277VAC (resistive)
1 HP, 277VAC
1/2 HP, 125VAC
1/8 HP, 125VAC
TV-5, 120VAC 25,000 cycles
Pilot duty: B300
LR 40304
VDE
FTR-K1CK ( ) W
16A, 250 VAC (cosØ=1)
3.5A, 250 VAC (cosØ=0.4)
16 A 24VDC (0ms)
5A/80A, 250 VAC (only T-type)
EN 61058-1:1992 and A1
250VAC, 16 (3)A 40T70
EN 61095:1993 and A1+A11 5A/80A 250VAC (only T-type)
16A, 250 VAC (cosØ=1)
3.5A, 250 VAC (cosØ=0.4)
16A 24VDC (0ms)
250VAC, 16(3)A40T70
Complies with NEMKO, DEMKO, FIMKO
FTR-K1
FTR-K1SERIES
SERIES
n SAFETY STANDARDS
12A type
Type
Compliance
UL
UL 508
Contact rating
FTR-K1AK ( ) (W)(MA, MB)
E63614
16A, 24VAC (resisitive)
16A, 277 VAC (resisitive)
1 /2HP, 277VAC
1/3 HP, 125VAC
Pilot duty: B300
CSA
C22.2 No. 14
LR 40304
FTR-K1(A, C)K ( ) (W)(MA, MB)
12A, 277VAC/24VDC (resisitive)
16A, 277 VAC/24VDC (resisitive)
1 /2HP, 277VAC
1/3 HP, 125VAC
Pilot duty: B300
VDE
0435, 0631, 0700, 0860
FTR-K1(A, C)K ( ) (W)(MA, MB)
12A, 250 VAC (cosØ=1) 85˚C
16A, 250 VAC (cosØ=1) 85˚C
12 A 24VDC (0ms)
16 A 24VDC (0ms)
3.5A, 250 VAC (cosØ=0.4) 85˚C
40013848
SEMKO
FTR-K1CK ( ) (W)(MA, MB)
Flammability: UL 94-VII (plastics)
12A, 24VAC (resisitive)
16A, 277 VAC (resisitive)
1 /2HP, 277VAC
1/3 HP, 125VAC
1/8 HP, 125VAC
Pilot duty: B300
EN 61058-1:1992 and A1
250VAC, 12 (3)A 40T70
EN 61095:1993 and A1+A11
Complies with NEMKO, DEMKO, FIMKO
n SAFETY STANDARDS
10A type
Type
Compliance
Contact rating
FTR-K1AL( ) (W,E)(LA, LB)-RG
UL
UL 508
E63614
CSA
C22.2 No. 14
LR 40304
VDE
0435, 0631, 0700, 0860
40013848
SEMKO
Flammability: UL 94-VII (plastics)
FTR-K1AL( ) (W)(LA, LB)
10A, 277 VAC (resistive)
1 /2HP, 125VAC
1/3 HP, 277VAC
Pilot duty: B300
FTR-K1CL ( )W-LA
10A, 277VAC (resistive)
FTR-K1 AL( )W-(LA, LB)
10A, 250 VAC, 150,000 cycles LA: 85ºC, LB:85ºC
3A, 250 VAC (cosØ=0.4) 100,000 cycles LA: 85ºC, LB:85ºC
FTR-K1CL ( )W-LA
10A, 250 VAC, 100,000 cycles 85ºC
EN 61058-1:1992 and A1
250VAC, 10 (3)A 40T85 (-LA)
EN 61095:1993 and A1+A11 250VAC, 10 (3)A 40T85 (-LB)
Complies with NEMKO, DEMKO, FIMKO
FTR-K1
FTR-K1SERIES
SERIES
n CHARACTERISTIC DATA
10
FTR-K1SERIES
SERIES
FTR-K1
11
FTR-K1SERIES
SERIES
FTR-K1
n DIMENSIONS
Dimensions
l
FTR-K1 ( ) / LB
Schematics
(BOTTOM VIEW)
l
PC board mounting
hole layout
(BOTTOM VIEW)
l
Dimensions
l
FTR-K1 ( ) MA / LA
Schematics
(BOTTOM VIEW)
l
PC board mounting
hole layout
(BOTTOM VIEW)
l
l
Dimensions
FTR-K1 ( ) / MB
Schematics
(BOTTOM VIEW)
l
PC board mounting
hole layout
(BOTTOM VIEW)
l
* terminals ommited in case of 1 form A version
Unit: mm
12
FTR-K1SERIES
SERIES
FTR-K1
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC
including amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
Recommended solder Sn-3.0Ag-0.5Cu.
l
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
l
4. Tin Whiskers
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
l
13
FTR-K1SERIES
SERIES
FTR-K1
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2009 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,
comprehensiveness, usefulness, availability and completeness thereof. Rev. December 1, 2009
14
Similar pages