Adapter FSP220-AAAN1 DESCRIPTION This product is an 220 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, POS systems that have a high wattage power source.This adapter operates at 90 to 264 VAC input voltage. The unit meets EN55022, EN55024 and FC C class B emission limits, and is designed for ITE application. APPLICATION IPC systems, embedded systems, printers, monitors and POS systems SAFETY STANDARD APPAOVAL FEATURES Meet Energy Star EPS2.0/ErP lot 7 Meet DOE Level V High Reliability EMC Standard: EN55022 C LASS B / EN55024 C LASS B Over C urrent Protection Over Temperature Protection Over Voltage Protection With PFC C ircuit NO LOAD AND EFFICIENCY No Load: Efficiency: DOE Level : PROTECTION Protection: W ATTAGE Wattage: 220W PRODUCT HIGHLIGHT V-Output: O/P Current: Socket Type: 24V 9.16A C 14 INPUT ELECTRICAL Input Voltage: Input Frequency: Input Current: 90 ~ 264 V 47 ~ 63 Hz ≦3A SC P,OVP,OPP,OTP ENVIRONMENTAL REQUIREMENTS TEMP. Range: Humidity: Altitude : MTBF: Storage : -20 to + 80 ℃ Operating: 80% RH, Non-condensing Storage: 90% RH, Non-condensing 2000 M 200,000 hours at typical load at 25℃ ambient base on SR332 MECHANICAL Dimension: 197mm(L) x 88mm(W) x 44.5mm(H) LED Indicator: No On/ Off Switch: No OUTPUT ELECTRICAL Single Output: 0.5 Watts ≧87 % V 24 V/ 9.16 A MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice