ON MMBF0201NL Power mosfet Datasheet

MMBF0201NL,
MVMBF0201NL
Power MOSFET
300 mAmps, 20 Volts
N−Channel SOT−23
www.onsemi.com
These miniature surface mount MOSFETs low RDS(on) assure
minimal power loss and conserve energy, making these devices ideal
for use in small power management circuitry. Typical applications are
d c −d c c o n v e r t e r s , p o w e r m a n a g e m e n t i n p o r t a b l e a n d
battery−powered products such as computers, printers, PCMCIA
cards, cellular and cordless telephones.
300 mAMPS − 20 VOLTS
RDS(on) = 1 W
N−Channel
3
Features
• Low RDS(on) Provides Higher Efficiency and Extends Battery Life
• Miniature SOT−23 Surface Mount Package Saves Board Space
• MVMBF Prefix for Automotive and Other Applications Requiring
•
1
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable*
These Devices are Pb−Free and are RoHS Compliant
2
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
20
Vdc
Gate−to−Source Voltage − Continuous
VGS
± 20
Vdc
Rating
Drain Current
− Continuous @ TA = 25°C
− Continuous @ TA = 70°C
− Pulsed Drain Current (tp ≤ 10 ms)
mAdc
ID
ID
IDM
300
240
750
Total Power Dissipation @ TA = 25°C
PD
225
mW
Operating and Storage Temperature Range
TJ, Tstg
− 55 to 150
°C
Thermal Resistance, Junction−to−Ambient
RqJA
556
°C/W
Maximum Lead Temperature for Soldering
Purposes, 1/8″ from case for 10 seconds
TL
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
MARKING DIAGRAM
AND PIN ASSIGNMENT
3
3
Drain
1
N1 M G
G
2
SOT−23
CASE 318
STYLE 21
N1
M
G
1
Gate
2
Source
= Specific Device Code
= Date Code*
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or overbar may
vary depending upon manufacturing location.
ORDERING INFORMATION
Package
Shipping†
MMBF0201NLT1G
SOT−23
(Pb−Free)
3000 / Tape &
Reel
MVMBF0201NLT1G*
SOT−23
(Pb−Free)
3000 / Tape &
Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 1995
October, 2016 − Rev. 6
1
Publication Order Number:
MMBF0201NLT1/D
MMBF0201NL, MVMBF0201NL
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
V(BR)DSS
20
−
−
Vdc
−
−
−
−
1.0
10
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage
(VGS = 0 Vdc, ID = 10 mA)
Zero Gate Voltage Drain Current
(VDS = 16 Vdc, VGS = 0 Vdc)
(VDS = 16 Vdc, VGS = 0 Vdc, TJ = 125°C)
IDSS
Gate−Body Leakage Current (VGS = ± 20 Vdc, VDS = 0)
IGSS
−
−
±100
nAdc
Gate Threshold Voltage
(VDS = VGS, ID = 250 mAdc)
VGS(th)
1.0
1.7
2.4
Vdc
Static Drain−to−Source On−Resistance
(VGS = 10 Vdc, ID = 300 mAdc)
(VGS = 4.5 Vdc, ID = 100 mAdc)
rDS(on)
−
−
0.75
1.0
1.0
1.4
gFS
−
450
−
mMhos
(VDS = 5.0 V)
Ciss
−
45
−
pF
Output Capacitance
(VDS = 5.0 V)
Coss
−
25
−
Transfer Capacitance
(VDG = 5.0 V)
Crss
−
5.0
−
td(on)
−
2.5
−
tr
−
2.5
−
td(off)
−
15
−
mAdc
ON CHARACTERISTICS (Note 1)
Forward Transconductance (VDS = 10 Vdc, ID = 200 mAdc)
W
DYNAMIC CHARACTERISTICS
Input Capacitance
SWITCHING CHARACTERISTICS (Note 2)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
(VDD = 15 Vdc, ID = 300 mAdc,
RL = 50 W)
Fall Time
ns
tf
−
0.8
−
QT
−
1400
−
pC
IS
−
−
0.3
A
Pulsed Current
ISM
−
−
0.75
Forward Voltage (Note 2)
VSD
−
0.85
−
Gate Charge (See Figure 5)
SOURCE−DRAIN DIODE CHARACTERISTICS
Continuous Current
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%.
2. Switching characteristics are independent of operating junction temperature.
www.onsemi.com
2
MMBF0201NL, MVMBF0201NL
TYPICAL ELECTRICAL CHARACTERISTICS
1.0
1.0
I D , DRAIN CURRENT (AMPS)
0.8
0.6
0.4
125°C
0.2
0
-55°C
25°C
0
1
2
3
4
5
ON-RESISTANCE (OHMS)
VGS = 4 V
0.6
VGS = 10, 9, 8, 7, 6 V
0.4
0.2
VGS = 3 V
0
0.3
0.9
Figure 1. Transfer Characteristics
Figure 2. On−Region Characteristics
1.2
0.9
VGS = 4.5 V
0.6
VGS = 10 V
0
0.2
0.4
0.6
ID, DRAIN CURRENT (AMPS)
1
0.8
2.0
1.5
1.0
0.5
0
0
5
10
15
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
1.10
14
1.05
ID = 250 mA
VGS(th) , NORMALIZED
1.00
VDS = 16 V
ID = 300 mA
10
20
Figure 4. On−Resistance versus
Gate−to−Source Voltage
16
12
1.4
2.4
Figure 3. On−Resistance versus Drain Current
8
6
4
0.95
0.90
0.85
0.80
0.75
0.70
2
0
0
1.2
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
0.3
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
0.6
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
1.5
0
0.8
0
6
RDS(on) , DRAIN-TO-SOURCE RESISTANCE (OHMS)
I D , DRAIN CURRENT (AMPS)
VGS = 5 V
0.65
160
450
2000
0.60
-25
3400
0
25
50
75
100
125
Qg, TOTAL GATE CHARGE (pC)
TEMPERATURE (°C)
Figure 5. Gate Charge
Figure 6. Threshold Voltage Variance
Over Temperature
www.onsemi.com
3
150
MMBF0201NL, MVMBF0201NL
TYPICAL ELECTRICAL CHARACTERISTICS
100
1.6
VGS = 10 V @ 300 mA
C, CAPACITANCE (pF)
80
1.4
1.2
VGS = 4.5 V @ 100 mA
1.0
60
Ciss
40
Coss
20
0.8
Crss
0.6
-50
-25
0
25
50
75
100
125
0
150
0
5
10
15
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
Figure 7. On−Resistance versus
Junction Temperature
Figure 8. Capacitance
10
SOURCE CURRENT (AMPS)
RDS(on) , NORMALIZED (OHMS)
1.8
1.0
0.1
125°C
25°C
-55°C
0.01
0.001
0
0.3
0.6
0.9
1.2
SOURCE-TO-DRAIN FORWARD VOLTAGE (VOLTS)
Figure 9. Source−to−Drain Forward Voltage
versus Continuous Current (IS)
www.onsemi.com
4
1.4
20
MMBF0201NL, MVMBF0201NL
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AR
D
0.25
3
E
1
2
T
HE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.
MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF
THE BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
DIM
A
A1
b
c
D
E
e
L
L1
HE
T
L
3X b
L1
VIEW C
e
TOP VIEW
A
A1
SIDE VIEW
c
SEE VIEW C
MIN
0.89
0.01
0.37
0.08
2.80
1.20
1.78
0.30
0.35
2.10
0_
MILLIMETERS
NOM
MAX
1.00
1.11
0.06
0.10
0.44
0.50
0.14
0.20
2.90
3.04
1.30
1.40
1.90
2.04
0.43
0.55
0.54
0.69
2.40
2.64
−−−
10 _
MIN
0.035
0.000
0.015
0.003
0.110
0.047
0.070
0.012
0.014
0.083
0_
INCHES
NOM
MAX
0.039
0.044
0.002
0.004
0.017
0.020
0.006
0.008
0.114
0.120
0.051
0.055
0.075
0.080
0.017
0.022
0.021
0.027
0.094
0.104
−−−
10 _
STYLE 21:
PIN 1. GATE
2. SOURCE
3. DRAIN
END VIEW
RECOMMENDED
SOLDERING FOOTPRINT*
3X
2.90
3X
0.90
0.95
PITCH
0.80
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MMBF0201NLT1/D