Magnetics Make Possible High Current Low Profile Surface Mount Inductors Model HM65 Features and Benefits HM65 Electrical / Environmental Operating Temperature Range -40°C to +130°C Operating Frequency Up to 3MHz • Operating Temperature Range -40°C to +130°C RoHS• Compliant Ambient Temperature, Maximum 80°C • Insulation System • Operating Frequency High Current Low Profile Surface Mount Inductors S RomHpliant Class F, 155°C Up to 3MHz Co Specifications / Packaging Inductance (1) Nominal Rated DC Current(2) µH (Amps) ± 20% 25°C 130°C Specifications / Packaging Part Number HM65-H1R0LF 1.0(1) Inductance 1.8 PartHM65-H1R8LFNominal HM65-H2R8LF μH 2.8 Number HM65-H3R9LF ± 20%3.9 HM65-H1R0LF HM65-H4R0LF 1.0 4.0 HM65-H1R8LF 1.8 HM65-H5R6LF 2.8 5.6 HM65-H2R8LF HM65-H6R0LF HM65-H3R9LF 3.9 6.0 HM65-H4R0LF HM65-H7R2LF 4.0 7.2 HM65-H5R6LF 5.6 HM65-1R5LF 1.5 HM65-H6R0LF 6.0 HM65-2R5LF HM65-H7R2LF 7.2 2.5 HM65-1R5LF 1.5 6.0 HM65-6R0LF HM65-2R5LF 2.5 8.2 HM65-8R2LF HM65-6R0LF 6.0 HM65-100LF HM65-8R2LF 8.2 10.0 HM65-100LF HM65-P1R0LF 10.0 1.0 HM65-P1R0LF HM65-P1R2LF 1.0 1.2 HM65-P1R2LF 1.2 HM65-P1R8LF 1.8 1.8 HM65-P1R8LF HM65-P2R5LF 2.5 2.5 HM65-P2R5LF HM65-M0R5LF HM65-M0R5LF 0.5 0.5 HM65-M0R8LF 0.8 HM65-M0R8LF 2.5 0.8 HM65-M2R5LF HM65-M2R5LF 2.5 DC Resistance(4) mW mW Typ. Max. Heating Current(3) (Amps) 20.0 DC Current 13.5 (2) Rated 15.3 (Amps)11.5 12.3 10.5 25°C 130°C 10.5 8.3 20.0 13.5 10.3 8.0 15.3 11.5 8.8 7.5 12.3 10.5 8.0 6.58.3 10.5 10.3 7.8 6.08.0 8.8 7.5 14.0 10.5 8.0 6.5 10.0 8.06.0 7.8 14.0 10.5 6.7 4.5 10.0 5.8 4.58.0 6.7 4.5 5.0 4.04.5 5.8 5.0 4.0 20.0 20.0 20.0 20.0 18.0 18.0 18.0 18.0 16.0 16.0 16.0 16.0 10.0 10.0 10.0 10.0 29.0 24.0 29.0 24.0 20.0 16.0 20.0 16.0 12.0 10.0 12.0 10.0 19.9 15.2Heating Current(3) 12.1 11.4(Amps) 11.4 19.9 15.2 8.1 12.1 8.1 11.4 7.8 11.4 17.1 8.1 8.1 15.2 7.8 11.5 17.1 8.1 15.2 11.5 7.8 8.1 19.9 7.8 19.9 19.9 19.9 15.2 15.2 15.2 15.2 16.3 16.3 16.3 16.3 9.3 9.3 1.7 2.9 4.6 5.2 5.2 10.2 10.2 11.4 1.7 2.9 5.1 10.2 11.3 1.7 1.7 2.9 2.9 1.8 1.8 5.5 Case Size (4) 2.5 DC Resistance 3.4 (Amps) 5.4 mΩ mΩ Typ. 8.0 Max. 1.7 8.0 2.5 2.9 3.4 11.4 4.6 5.4 11.4 5.2 8.0 5.2 13.5 8.0 10.2 11.4 2.5 10.2 11.4 3.4 13.5 11.4 1.7 8.0 2.5 2.9 11.4 3.4 5.1 8.0 13.5 11.4 10.2 11.3 2.5 13.5 1.7 2.5 2.5 1.7 2.5 3.4 3.4 2.9 3.4 3.4 2.9 1.8 2.2 2.2 1.8 2.2 2.2 6.0 5.5 6.0 Ht Height mm Max. Standard Standard Case Size Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Mini Mini Mini Mini Mini Mini Notes: (1) Inductance is measured at 100kHz, 0.1V without DC current. Notes: (1) Inductance is measured at 100kHz, without (2) Rated DC current is the approximate current at which 0.1V inductance willDC becurrent. decreased by 25% from its initial (zero DC) value. (2) isRated DCcurrent currentwhich is thecauses approximate current at which inductance willapproximately be decreased40°C. by 25% from its initial (zero DC) value. (3) Heating current the DC the inductor temperature to increase by (4) DC resistance(3) is measured at 25°C.is the DC current which causes the inductor temperature to increase by approximately 40°C. Heating current 13” Reel Qty (Units) 5.6 400 Ht 400 5.6 5.6 Height 400 5.6 mm Max. 400 5.6 400 5.6 5.6 5.6 400 5.6 5.6 5.6 400 5.6 400 6.0 5.6 5.6 400 5.6 5.6 6.0 400 5.6 400 5.6 5.6 400 5.6 5.6 5.6 5.6 400 5.6 400 6.0 6.0 400 6.0 6.0 6.0 6.0 400 6.0 6.0 400 5.6 500 5.6 5.6 5.6 5.6 500 5.6 500 13” reel Qty (Units) 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 500 500 500 (4) DC resistance is measured at 25°C. Outline Dimensions (mm) Outline Dimensions (mm) Top View Recommended Solder Pad Layout Bottom View Side View BI HM65 – XXXXLF YYWW MALAYSIA A Max. C 3 H D Ht CB 7.3 13.5 6.7 10.4 CD 2.6 7.3 2.6 6.7 D E E 2.6 2.6 2.6 1.5 2.6 1.5 FF 2.6 2.6 2.3 2.3 L J E 2 F Refer to Specifications Table A Size B A Case 12.5 13.5 Standard 12.5 10.4 10.4 Mini 10.4 I P D 1 B Max. Case Size Standard Mini DUMMY TERMINAL G G 2.6 2.6 1.1 1.1 M G I J H H I 7.47.4 13.9 13.94.4 5.5 10.8 5.5 10.8 2.5 J K 4.4 6.9 2.5 6.5 LK 6.9 3.0 6.5 1.8 K N M L N M P 3.83.0 3.2 3.83.0 1.8 2.8 2.8 1.5 3.0 N 3.2 1.5 P 3.0 3.0 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com 59 2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.ttelectronicsmagnetics.com We reserve the right to change specifications without prior notice. © TT Electronics plc Rev. 01 High Current Low Profile Surface Mount Inductors Make Possible Model HM65 Electrical Characteristic @ 25°C Electrical Characteristics @ 25°C Ordering Information Ordering InformationHM65 - H Model Series LF TR13 HM65 - H 1R0 LF TR13 Model Series TR - Tape & Reel Packing 13 - 13” reel Type: Type: H = High Current H = High Current P = Premium Material P Core = Premium Core M = Mini-Package M = Mini-Package 1R0 Material Lead-Free TR - Tape & Reel Packing 13 - 13” reel Lead-Free Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10μH, “R“ denotes the decimal point Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10µH, “R“ General Note denotes the decimal point TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsmagnetics.com © TT Electronics plc Rev. 01