Surface Mount Aluminum Electrolytic Capacitors NACK Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • VERY LOW IMPEDANCE (Up to 60% lower than NACZ) • WIDE TEMPERATURE RANGE (-55 +105OC) • REDUCED SIZE (Up to 50% smaller than NACZ) • DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING CHARACTERISTICS Rated Voltage Range Rated Capactance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current after 2 minutes @ 20°C RoHS Compliant 6.3 ~ 100Vdc 3.3 ~ 6,800µF -55°C ~ +105°C ±20%(M) includes all homogeneous materials *See Part Number System for Details 0.01CV or 3µA, whichever is greater W.V. (Vdc) S.V. (Vdc) C ≤ 1,000µF C = 2,200µF All Case Sizes C = 3,300µF C = 4,700µF C = 6,800µF Z -25°C/Z +20°C Z -40°C/Z +20°C Z -55°C/Z +20°C Capacitance Change Tanδ Leakage Current Maximum Tanδ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @ 105°C 4 ~ 10mm Dia. 2,000 Hours 12.5 ~ 18mm Dia. 5,000 Hours MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 100KHz AND 105OC) Cap (µF) 240 160 300 Working Voltage (Vdc) 25 35 50 63 90 60 50 90 85 90 90 80 160 165 90 120 160 160 165 160 120 160 195 240 250 240 195 160 195 240 240 250 240 195 240 240 280 250 280 280 240 350 400 300 600 280 600 600 670 800 280 600 600 670 800 300 600 600 600 850 600 600 850 1100 1800 2060 600 850 1100 1800 2060 - 850 1100 1800 2060 - 1100 1610 1410 917 1100 1610 1690 1800 1610 1800 - 3.3 4.7 6.3 - 10 - 10 - - 22 90 90 33 - 90 160 150 90 160 160 240 - 220 240 47 68 100 280 300 600 600 850 1100 1800 330 470 680 1000 1500 2200 3300 4700 6800 - 16 - 900 - 6.3 8.0 0.26 0.30 0.36 2 3 4 10 16 25 35 50 63 80 13 20 32 44 63 79 100 0.19 0.16 0.14 0.12 0.10 0.08 0.08 0.21 0.16 0.20 0.18 0.25 0.22 0.29 2 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 3 3 3 3 3 Within ±30% of initial measured value Less than 200% of specified maximum value Less than specified maximum value 100 125 0.07 2 3 3 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR 80 25 40 60 60 100 - 130 130 130 200 200 500 500 500 500 793 500 793 - 917 793 917 Frequency Correction Factor 60Hz 120Hz 1KHz 0.7 0.75 0.9 10KHz 100KHz 0.95 1.0 - - PRECAUTIONS ® 44 NIC COMPONENTS CORP. NACK rev. 1 05212007 Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NACK Series MAXIMUM IMPEDANCE (Ω AT 100KHz AND 20OC) Cap (µF) 3.3 4.7 6.3 - 10 - 10 - - 22 1.35 1.35 33 - 1.35 0.70 150 1.35 0.70 0.70 0.36 - 220 0.36 47 68 100 0.36 0.34 0.26 Working Voltage (Vdc) 25 35 50 63 1.35 2.9 3.0 1.35 1.52 1.35 1.35 1.5 0.70 0.88 1.35 1.2 0.70 0.70 0.88 0.70 1.2 0.70 0.68 0.36 0.65 0.36 0.68 0.70 0.68 0.36 0.36 0.65 0.36 0.68 0.36 0.36 0.34 0.65 0.34 0.34 0.36 0.34 0.35 0.26 0.16 0.34 0.16 0.16 0.18 0.16 0.34 0.16 0.16 0.18 0.16 0.26 16 - 80 5.0 3.0 2.4 2.4 100 - 1.3 1.3 1.3 0.7 0.7 0.32 0.32 0.32 - 0.32 0.17 0.32 0.17 - 0.153 0.34 0.16 0.16 0.16 0.08 0.12 0.17 0.153 0.26 0.16 0.16 0.16 0.08 0.06 0.073 0.082 0.153 0.16 0.08 0.06 0.073 0.08 0.16 0.08 0.06 0.035 0.073 0.08 0.06 0.035 0.06 0.035 0.06 0.035 0.033 0.035 0.033 0.035 0.033 - 330 470 680 1000 1500 2200 3300 4700 6800 PART NUMBER SYSTEM NACK 101 M 50V 8x10.5 TR 13 WT F RoHS Compliant (97% Sn/3% Bi for 4 ~ 10mm Dia.) (100% Sn for 12.5 ~ 18mm Dia.) Optional Wide Terminations (12.5 ~ 18mm Dia.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF Series ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 45 Surface Mount Aluminum Electrolytic Capacitors NACK Series STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap (µF) Code 3.3 4.7 Working Voltage (Vdc) 25 35 50 4x6.1 4x6.1 4x6.1 5x6.1 4x6.1 5x6.1 6.3x6.1 3R3 4R7 6.3 - 10 - 16 - 10 100 - - 4x6.1 22 220 4x6.1 4x6.1 4x6.1 5x6.1 5x6.1 5x6.1 33 330 - 4x6.1 5x6.1 - 5x6.1 6.3x6.1 6.3x1 47 470 6.3x6.1 6.3x6.1 68 680 100 101 150 151 4x6.1 5x6.1 5x6.1 6.3x6.1 - 6.3x6.1 6.3x8 8x6.5 8x10.5 6.3x8 6.3x8 8x10.5 8x10.5 220 221 6.3x6.1 8x10.5 330 331 470 680 1000 1500 2200 3300 4700 6800 471 681 102 152 222 332 472 682 6.3x8 8x6.5 8x10.5 8x10.5 10x10.5 12.5x14 16x17 6.3x6.1 63 5x6.1 80 5x6.1 6.3x6.1 6.3x8 8x6.5 100 - 6.3x8 8x6.5 8x10.5 8x10.5 8x10.5 8x10.5 10x10.5 6.3x6.1 6.3x8 8x6.5 6.3x8 8x6.5 - 8x10.5 10x10.5 12.5x14 8x10.5 12.5x14 12.5x14 8x10.5 10x10.5 12.5x14 16x17 10x10.5 12.5x14 12.5x14 16x17 8x10.5 10x10.5 12.5x14 - 18x17 - 5x6.1 6.3x6.1 6.3x6.1 - 6.3x6.1 6.3x6.1 6.3x8 8x6.5 6.3x8 6.3x8 8x6.5 8x10.5 8x10.5 8x10.5 10x10.5 12.5x14 - 16x17 18x17 8x10.5 8x10.5 10x10.5 12.5x14 16x17 18x17 8x10.5 10x10.5 12.5x14 16x17 18x17 - 10x10.5 12.5x14 16x17 18x17 - 12.5x14 12.5x14 16x17 16x17 - 16x17 16x17 16x17 - 16x17 18x17 - 18x17 - - - Denotes New Value DIMENSIONS (mm) Case Size Dφ ±0.5 4 x 6.1 4.0 5 x 6.1 5.0 6.3 6.1 6.3 6.3 x 8 6.3 8 x 6.5 8.0 8 x 10.5 8.0 10 x 10.5 10.0 12.5 x 14T2 12.5 12.5 x 14WT 12.5 16 x 17T2 16.0 16 x 17WT 16.0 18 x 17T2 18.0 18 x 17WT 18.0 Anti-Vibration Skirt on WT Style 12.5, 16 & 18mm Dia. - L max. 6.1 6.1 6.1 8.0 6.5 10.5 10.5 14.0 14.0 17.5 17.5 17.5 17.5 A, B ±0.2 4.3 5.3 6.6 6.6 8.3 8.3 10.3 13.5 13.5 17.0 17.0 19.0 19.0 H max. 5.5 6.5 7.8 7.8 9.5 10.0 12.0 15.0 15.0 19.0 19.0 21.0 21.0 I ±0.3 1.8 2.2 2.6 2.6 3.4 3.4 3.5 4.7 4.7 5.5 5.5 6.7 6.7 P ±0.3 1.0 1.5 1.8 1.8 2.2 3.1 4.6 4.4 4.4 6.7 6.7 6.7 6.7 W 0.65 ± 0.1 0.65 ± 0.1 0.65 ± 0.1 0.65 ± 0.1 0.65 ± 0.1 0.9 ± 0.2 0.9 ± 0.2 0.9 ± 0.3 1.2 ± 0.3 1.2 ± 0.3 1.4 ± 0.3 1.2 ± 0.2 1.4 ± 0.2 K 0.35 ± 0.2 0.35 ± 0.2 0.35 ± 0.2 0.35 ± 0.2 0.35 ± 0.2 0.7 ± 0.2 0.7 ± 0.2 0.7 ± 0.3 0.7 ± 0.3 0.7 ± 0.3 0.7 ± 0.3 0.7 ± 0.3 0.7 ± 0.3 R 2.2 ± 0.2 3.0 ± 0.2 3.0 ± 0.2 STANDARD + Dφ I I W S 7.1 ± 0.2 9.0 ± 0.2 11.0 ± 0.2 WT STYLE - + I I W K - K A A L T 2.4 ± 0.2 1.9 ± 0.2 1.9 ± 0.2 T R ® 46 Termination deflection: T2 = +0.3mm WT = + 0.15mm/- 0.05mm NIC COMPONENTS CORP. www.niccomp.com P B H www.lowESR.com S R P B www.RFpassives.com www.SMTmagnetics.com