UNISONIC TECHNOLOGIES CO., LTD MBR10120 Preliminary DIODE 10A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC MBR10120 is a 10A schottky barrier rectifier, it uses UTC’s advanced technology to provide the customers with high surge capability, high efficiency, high current capability, low power loss and low forward voltage drop, etc. The UTC MBR10120 is suitable for free wheeling and polarity protection, etc. FEATURES * Low Reverse Current * Low Stored Charge, Majority Carrier Conduction * Low Power Loss/High Efficiency * Highly Stable Oxide Passivated Junction SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR10120L-TA3-T MBR10120G-TA3-T MBR10120L-TF3-T MBR10120G-TF3-T MBR10120L-T27-T MBR10120G-T27-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F TO-277 Pin Assignment 1 2 3 A K A A K A A K A Packing Tube Tube Tape Reel MARKING TO-220/TO-220F www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd TO-277 1 of 3 QW-R202-021.a MBR10120 Preliminary DIODE ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified) Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Working Peak Reverse Voltage VRWM 120 V Repetitive Peak Reverse Voltage VRRM 120 V Maximum RMS Reverse Voltage VRMS 70 V DC Blocking Voltage VR 120 V Average Rectified Output Current (TA=105°C) IO 10 A Peak Forward Surge Current 8.3ms Single Half IFSM 110 A Sine-Wave Superimposed on Rated Load Junction Temperature TJ -55~+150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER SYMBOL RATINGS TO-220/TO-220F 62.5 Junction to Ambient θJA TO-277 73 (Note) TO-220 2 Junction to Case TO-220F θJC 3.31 TO-277 13 (Note) Note: Mounted on an FR4 PCB, single-sided copper, with 100 cm2 copper pad area. UNIT °C/W °C/W °C/W °C/W °C/W ELECTRICAL CHARACTERISTICS (Note 2) PARAMETER SYMBOL TEST CONDITIONS IF=10A, TC=25°C Instantaneous Forward Voltage Drop VF IF=10A, TC=125°C Rated DC Voltage, TC=25°C Instantaneous Reverse Current IR Rated DC Voltage, TC=125°C Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.85 V 0.80 500 μA 20 mA 2 of 3 QW-R202-021.a MBR10120 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-021.a