® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 REVISION HISTORY Revision Rev. 0.1 Rev. 0.2 Rev. 0.3 Rev. 0.4 Rev. 0.5 Rev. 0.6 Rev.1.0 Description Initial Issue Added ISB Spec. Revised FEATURES & ORDERING INFORMATION Lead free and green package available to Green package available Added packing type in ORDERING INFORMATION Deleted TSOLDER in ABSOLUTE MAXIMUN RATINGS Revised VDR Revised ORDERING INFORMATION in page 11 Deleted E grade Revised ISB1 in page 4 Revised Notes item 1 and 2 in page 4 1. VIH(max) = VCC + 2.0V for pulse width less than 6ns. 2. VIL(min) = VSS - 2.0V for pulse width less than 6ns. Revised ORDERING INFORMATION Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 0 Issue Date Oct.14.2007 Feb.1.2008 May.20.2009 Sep.11.2009 Aug.30.2010 Apr.12.2011 Aug.29.2013 ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 FEATURES GENERAL DESCRIPTION Fast access time : 55/70ns Low power consumption: Operating current : 45/30mA (TYP.) Standby current : 8μA (TYP.) LL-version Single 4.5V ~ 5.5V power supply All inputs and outputs TTL compatible Fully static operation Tri-state output Data retention voltage : 1.5V (MIN.) Green package available Package : 44-pin 400 mil TSOP-II 48-ball 6mm x 8mm TFBGA The LY6210248 is a 8,388,608-bit low power CMOS static random access memory organized as 1,048,576 words by 8 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature. The LY6210248 is well designed for very low power system applications, and particularly well suited for battery back-up nonvolatile memory application. The LY6210248 operates from a single power supply of 4.5V ~ 5.5V and all inputs and outputs are fully TTL compatible PRODUCT FAMILY Product Family LY6210248 LY6210248(I) Operating Temperature 0 ~ 70℃ -40 ~ 85℃ Vcc Range Speed 4.5 ~ 5.5V 4.5 ~ 5.5V 55/70ns 55/70ns FUNCTIONAL BLOCK DIAGRAM PIN DESCRIPTION Vcc Vss A0-A19 DECODER DQ0-DQ7 I/O DATA CIRCUIT CE# CE2 WE# OE# CONTROL CIRCUIT Power Dissipation Standby(ISB1,TYP.) Operating(Icc,TYP.) 8µA(LL) 45/30mA 8µA(LL) 45/30mA 1024Kx8 MEMORY ARRAY SYMBOL DESCRIPTION A0 - A19 Address Inputs DQ0 – DQ7 Data Inputs/Outputs CE#, CE2 Chip Enable Inputs WE# Write Enable Input OE# Output Enable Input VCC Power Supply VSS Ground NC No Connection COLUMN I/O Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 1 ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 PIN CONFIGURATION A NC OE# A0 A1 A2 CE2 B NC NC A3 A4 CE# NC C DQ0 NC A5 A6 NC DQ4 D Vss DQ1 A17 A7 E Vcc DQ2 F DQ3 G H DQ5 Vcc NC A16 DQ6 Vss NC A14 A15 NC NC A12 A13 WE# NC A18 A8 A9 A10 A11 A19 1 2 3 4 TFBGA 5 6 NC DQ7 Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 2 ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 ABSOLUTE MAXIMUM RATINGS PARAMETER Voltage on VCC relative to VSS Voltage on any other pin relative to VSS SYMBOL VT1 VT2 Operating Temperature TA Storage Temperature Power Dissipation DC Output Current TSTG PD IOUT RATING -0.5 to 6.5 -0.5 to VCC+0.5 0 to 70(C grade) -40 to 85(I grade) -65 to 150 1 50 UNIT V V ℃ ℃ W mA *Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to the absolute maximum rating conditions for extended period may affect device reliability. TRUTH TABLE MODE Standby Output Disable Read Write Note: CE# CE2 OE# WE# H X L L L X L H H H X X H L X X X H H L I/O OPERATION High-Z High-Z High-Z DOUT DIN H = VIH, L = VIL, X = Don't care. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 3 SUPPLY CURRENT ISB,ISB1 ISB,ISB1 ICC,ICC1 ICC,ICC1 ICC,ICC1 ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 DC ELECTRICAL CHARACTERISTICS SYMBOL TEST CONDITION PARAMETER Supply Voltage VCC *1 Input High Voltage VIH *2 Input Low Voltage VIL Input Leakage Current ILI VCC ≧ VIN ≧ VSS Output Leakage VCC ≧ VOUT ≧ VSS ILO Current Output Disabled Output High Voltage VOH IOH = -1mA Output Low Voltage VOL IOL = 2mA Cycle time = Min. - 55 CE# = VIL and CE2 = VIH ICC II/O = 0mA - 70 Other pins at VIL or VIH Average Operating Power supply Current Cycle time = 1µs CE#≦0.2V and CE2≧VCC-0.2V ICC1 II/O = 0mA Other pins at 0.2V or VCC-0.2V CE# = VIH or CE2 = VIL ISB Other pins at VIL or VIH Standby Power CE# ≧VCC-0.2V -LL Supply Current ISB1 or CE2≦0.2V Other pins at 0.2V or VCC-0.2V -LLI MIN. 4.5 2.4 - 0.2 -1 TYP. 5.0 - *4 MAX. 5.5 VCC+0.3 0.6 1 UNIT V V V µA -1 - 1 µA 2.4 - - 0.4 V V - 45 60 mA - 30 50 mA - 6 12 mA - 0.2 2 mA - 8 30 µA - 8 50 µA Notes: 1. VIH(max) = VCC + 2.0V for pulse width less than 6ns. 2. VIL(min) = VSS - 2.0V for pulse width less than 6ns. 3. Over/Undershoot specifications are characterized, not 100% tested. 4. Typical values are included for reference only and are not guaranteed or tested. Typical values are measured at VCC = VCC(TYP.) and TA = 25℃ CAPACITANCE (TA = 25℃, f = 1.0MHz) PARAMETER Input Capacitance Input/Output Capacitance SYMBOL CIN CI/O MIN. - MAX 6 8 Note : These parameters are guaranteed by device characterization, but not production tested. AC TEST CONDITIONS Input Pulse Levels Input Rise and Fall Times Input and Output Timing Reference Levels Output Load 0.2V to VCC - 0.2V 3ns 1.5V CL = 30pF + 1TTL, IOH/IOL = -1mA/2mA Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 4 UNIT pF pF ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 AC ELECTRICAL CHARACTERISTICS (1) READ CYCLE PARAMETER Read Cycle Time Address Access Time Chip Enable Access Time Output Enable Access Time Chip Enable to Output in Low-Z Output Enable to Output in Low-Z Chip Disable to Output in High-Z Output Disable to Output in High-Z Output Hold from Address Change (2) WRITE CYCLE PARAMETER Write Cycle Time Address Valid to End of Write Chip Enable to End of Write Address Set-up Time Write Pulse Width Write Recovery Time Data to Write Time Overlap Data Hold from End of Write Time Output Active from End of Write Write to Output in High-Z SYM. tRC tAA tACE tOE tCLZ* tOLZ* tCHZ* tOHZ* tOH SYM. tWC tAW tCW tAS tWP tWR tDW tDH tOW* tWHZ* LY6210248-55 MIN. MAX. 55 55 55 30 10 5 20 20 10 - LY6210248-70 MIN. MAX. 70 70 70 35 10 5 25 25 10 - UNIT LY6210248-55 MIN. MAX. 55 50 50 0 45 0 25 0 5 20 LY6210248-70 MIN. MAX. 70 60 60 0 55 0 30 0 5 25 UNIT *These parameters are guaranteed by device characterization, but not production tested. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 5 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 TIMING WAVEFORMS READ CYCLE 1 (Address Controlled) (1,2) tRC Address tAA Dout tOH Previous Data Valid Data Valid READ CYCLE 2 (CE# and CE2 and OE# Controlled) (1,3,4,5) tRC Address tAA CE# tACE CE2 OE# tOE tOH tOHZ tCHZ tOLZ tCLZ Dout High-Z Data Valid High-Z Notes : 1.WE# is high for read cycle. 2.Device is continuously selected OE# = low, CE# = low., CE2 = high. 3.Address must be valid prior to or coincident with CE# = low, CE2 = high; otherwise tAA is the limiting parameter. 4.tCLZ, tOLZ, tCHZ and tOHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. 5.At any given temperature and voltage condition, tCHZ is less than tCLZ , tOHZ is less than tOLZ. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 6 ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6) tWC Address tAW CE# tCW CE2 tAS tWP tWR WE# tWHZ Dout TOW High-Z (4) tDW Din (4) tDH Data Valid WRITE CYCLE 2 (CE# and CE2 Controlled) (1,2,5,6) tWC Address tAW CE# tAS tWR tCW CE2 tWP WE# tWHZ Dout High-Z (4) tDW Din tDH Data Valid Notes : 1.WE#, CE# must be high or CE2 must be low during all address transitions. 2.A write occurs during the overlap of a low CE#, high CE2, low WE#. 3.During a WE#controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be placed on the bus. 4.During this period, I/O pins are in the output state, and input signals must not be applied. 5.If the CE#low transition and CE2 high transition occurs simultaneously with or after WE# low transition, the outputs remain in a high impedance state. 6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 7 ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 DATA RETENTION CHARACTERISTICS PARAMETER VCC for Data Retention Data Retention Current SYMBOL TEST CONDITION VDR CE# ≧ VCC - 0.2V or CE2 ≦0.2V VCC = 1.5V -LL CE# ≧VCC - 0.2V or CE2 ≦0.2V IDR Other pins at 0.2V or VCC - 0.2V -LLI Chip Disable to Data Retention Time Recovery Time tRC* = Read Cycle Time tCDR MIN. 1.5 TYP. - - 5 30 µA - 5 50 µA 0 - - ns tRC* - - ns See Data Retention Waveforms (below) tR DATA RETENTION WAVEFORM Low Vcc Data Retention Waveform (1) (CE# controlled) VDR ≧ 1.5V Vcc Vcc(min.) Vcc(min.) tCDR CE# VIH tR CE# ≧ Vcc-0.2V VIH Low Vcc Data Retention Waveform (2) (CE2 controlled) VDR ≧ 1.5V Vcc Vcc(min.) Vcc(min.) tCDR CE2 tR CE2 ≦ 0.2V VIL VIL Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 8 MAX. UNIT 5.5 V ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 PACKAGE OUTLINE DIMENSION 44-pin 400mil TSOP-II Package Outline Dimension SYMBOLS A A1 A2 b c D E E1 e L ZD y Θ DIMENSIONS IN MILLMETERS MIN. NOM. MAX. 1.20 0.05 0.10 0.15 0.95 1.00 1.05 0.30 0.45 0.12 0.21 18.212 18.415 18.618 11.506 11.760 12.014 9.957 10.160 10.363 0.800 0.40 0.50 0.60 0.805 0.076 o o o 3 6 0 DIMENSIONS IN MILS MIN. NOM. MAX. 47.2 2.0 3.9 5.9 37.4 39.4 41.3 11.8 17.7 4.7 8.3 717 725 733 453 463 473 392 400 408 31.5 15.7 19.7 23.6 31.7 3 o o o 0 3 6 Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 9 ® LY6210248 Rev. 1.0 1024K X 8 BIT LOW POWER CMOS SRAM 48-ball 6mm × 8mm TFBGA Package Outline Dimension Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 10 ® LY6210248 1024K X 8 BIT LOW POWER CMOS SRAM Rev. 1.0 ORDERING INFORMATION Package Type Access Time (Speed)(ns) 48Pin12mmx20mm TSOP-I 55 Power Type Ultra Low Power Temperature Range(℃) 0℃~70℃ -40℃~85℃ 70 Ultra Low Power 0℃~70℃ -40℃~85℃ 48-ball 6mmx8mm TFBGA 55 Ultra Low Power 0℃~70℃ -40℃~85℃ 70 Ultra Low Power 0℃~70℃ -40℃~85℃ Packing Type Tray LY6210248ML-55LL Tape Reel LY6210248ML-55LLT Tray LY6210248ML-55LLI Tape Reel LY6210248ML-55LLIT Tray LY6210248ML-70LL Tape Reel LY6210248ML-70LLT Tray LY6210248ML-70LLI Tape Reel LY6210248ML-70LLIT Tray LY6210248GL-55LL Tape Reel LY6210248GL-55LLT Tray LY6210248GL-55LLI Tape Reel LY6210248GL-55LLIT Tray LY6210248GL-70LL Tape Reel LY6210248GL-70LLT Tray LY6210248GL-70LLI Tape Reel LY6210248GL-70LLIT Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 11 Lyontek Item No. ® LY6210248 Rev. 1.0 1024K X 8 BIT LOW POWER CMOS SRAM THIS PAGE IS LEFT BLANK INTENTIONALLY. Lyontek Inc. reserves the rights to change the specifications and products without notice. 5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan. TEL: 886-3-6668838 FAX: 886-3-6668836 12