Low Noise Amplifier 1400 - 2000 MHz Features AM50-0006 V3 Functional Block Diagram • • • • • Low Noise Figure: 1.6 dB High Input IP3: -6 dBm at 3 V, 6.5 mA bias High Gain: 18 dB Single Supply: +3 to +8 VDC Adjustable current: 3 to 20 mA with external resistor • SOT-26 Plastic Package Description M/A-COM’s AM50-0006 is a high dynamic range, GaAs MMIC, low noise amplifier in a SOT-26 surface mount plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The AM50-0006 also features flexible biasing to control the current consumption vs. dynamic range trade-off. The AM50-0006 can operate from any positive supply voltage in the 3 V to 8 V range. Its current can be controlled over a range of 3 mA to 20 mA with an external resistor. The AM50-0006 is ideally suited for use where low noise figure, high gain, high dynamic range, and low power consumption are required. Typical applications included receiver front ends in PDC1500, DCS-1800, DCS-1900 and other PCN/PCS applications. It is also useful as a gain block, buffer, driver, and IF amplifier in both fixed or portable PDC, PHS, and PCN/PCS systems. The AM50-0006 is fabricated using a low-cost 0.5-micron gate length GaAs process. The process features full passivation for increased performance and reliability. The AM50-0006 is 100% RF tested to ensure performance specification compliance. Pin Configuration Pin No. Pin Name Description 1 GND RF and DC Ground 2 REXT CEXT External Current Control By-Pass Capacitor 3 RF Input RF Input of the amplifier 4 VDD Positive supply voltage 5 GND RF and DC Ground 6 RF Output RF Output of the amplifier Ordering Information 1 Part Number Package AM50-0006 SOT-26 Plastic Package AM50-0006TR Forward Tape and Reel AM50-0006PDC 1400-1520 MHz Designer’s Kit AM50-0006PCS 1700-2000 MHz Designer’s Kit 1. Reference Application Note M513 for reel size information. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz AM50-0006 V3 Electrical Specifications2: TA = +25°C, Z0 = 50 Ω, Pin = -30 dBm Parameter Test Conditions Units Gain VDD = 3 Volts Noise Figure 1500 MHz 1900 MHz Min. Typ. Max. Min. Typ. Max. dB 15 18 20 15 17.5 20 VDD = 3 Volts dB — 1.60 2.00 — 1.65 2.00 Input VSWR — Ratio — 2.2:1 — — 1.5:1 — Output VSWR — Ratio — 1.5:1 — — 1.5:1 — Output 1 dB Compression VDD = 3 Volts dBm — 1 — — 0 — Input IP3 VDD = 3 Volts dBm — -5.0 — — -6.0 — Reverse Isolation — dB — 35 — — 35 — Drain Current VDD = 3 Volts mA 4.5 6.5 10 4.5 6.5 10 2. Using external 120 ohm resistor. See Functional Schematics. Absolute Maximum Ratings 3,4 Parameter Absolute Maximum VDD +10 VDC Input Power Current +17 dBm 5 Channel Temperature SOT-26† 30 mA 6 02XY +150°C Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. When pin #2 is used to increase current (see note 8). 6. Thermal resistance (θjc) = +150°C/W. Handling Procedures † Meets JEDEC moisture sensitivity level 1 requirements. Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz AM50-0006 V3 Data for 1700 - 2000 MHz Operation Functional Schematic Γ Input Reflection Coefficient Frequency 1700 MHz 1850 MHz 2000 MHz Γin (mag) 0.699 0.674 0.649 Γin (ang) 48.47° 38.68° 29.27° External Circuitry Parts List 7 Part Recommended PCB Configuration Layout View Pin 1 Value Purpose C1 47 pF DC Block C2 470 pF By-Pass L1 2.7 nH Tuning L2 22 nH RF Choke R1 See note 8 Current control C3 470 pF By-Pass 7. All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.) 8. Pin 2 allows use of an external resistor to ground for optional, higher current. For IDD ~ 5 mA, R1 = 150 ohms; IDD ~ 6.5 mA, R1 = 120 ohms; IDD ~ 20 mA, R1 = 27 ohms. Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008” (0.20 mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended RF metalization thickness is 1 ounce copper. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz AM50-0006 V3 Typical Performance Curves, 1700 - 2000 MHz Input IP3 vs. Bias @ +25°C Gain vs. Bias @ +25°C 10 22 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 20 5 18 0 16 14 12 1.7 -5 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 1.8 1.9 2.0 2.1 2.2 -10 1.7 1.8 Frequency (GHz) 1.9 2.0 Frequency (GHz) Noise Figure (Bias = 3V, 6.5 mA) VSWR (Bias = 3V, 6.5 mA) 3.0 2.5 Input VSWR Output VSWR 3 V, 6.5 mA 2.5 2.0 2.0 1.5 1.5 1.0 1.7 1.8 1.9 2.0 2.1 2.2 1.0 1.7 1.8 Frequency (GHz) 1.9 2.0 2.1 2.2 Frequency (GHz) Input IP3 vs. Drain Current (Frequency = 1900 MHz) Output P1 dB vs. Bias @+25°C 10 10 5V 3V 5 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 5 0 0 -5 -5 -10 1.7 -10 1.8 1.9 2.0 Frequency (GHz) 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 5 10 15 20 Drain Current (mA) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz AM50-0006 V3 Typical Performance Curves, 1700 - 2000 MHz Gain vs. Temperature (Bias = 3V, 6.5 mA) Noise Figure vs. Temperature (Bias = 3V, 6.5 mA) 22 3.0 +25°C +85°C -40°C 20 2.5 18 2.0 16 1.5 14 1.0 12 1.7 1.8 1.9 2.0 2.1 2.2 Frequency (GHz) 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 0.5 1.7 +25°C +85°C -40°C 1.8 1.9 2.0 2.1 2.2 Frequency (GHz) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz AM50-0006 V3 Data for 1400 - 1520 MHz Operation Functional Schematic External Circuitry Parts List9 Part Value Purpose C1 47 pF DC Block C2 470 pF By-Pass L1 10 nH Tuning L2 3.9 nH Tuning L3 22 nH RF Choke R1 See note 10 Current control C3 470 pF By-Pass 9. All external circuitry parts are readily available, low cost surface mount components (.060 in. x .030 in. or .080 in. x .050 in.) 10. Pin 2 allows use of an external resistor to ground for optional, higher current. For IDD ~ 5 mA, R1 = 150 ohms; IDD ~ 6.5 mA, R1 = 120 ohms; IDD ~ 20 mA, R1 = 27 ohms. Recommended PCB Configuration Cross Section View Layout View Pin 1 The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008” (0.20 mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended RF metalization thickness is 1 ounce copper. 6 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz AM50-0006 V3 Typical Performance Curves, 1400 - 1520 MHz Input IP3 vs. Bias @ +25°C Gain vs. Bias @ +25°C 10 22 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 20 5 18 0 16 -5 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 14 12 1.30 1.35 1.40 1.45 1.50 1.55 1.60 -10 1.35 1.40 1.45 1.50 1.55 Frequency (GHz) Frequency (GHz) VSWR (Bias = 3V, 6.5 mA) Noise Figure (Bias = 3V, 6.5 mA) 2.5 3.0 Input VSWR Output VSWR 3 V, 6.5 mA 2.5 2.0 2.0 1.5 1.5 1.0 1.35 1.40 1.45 1.50 1.55 1.0 1.30 1.35 1.45 1.50 1.55 1.60 Input IP3 vs. Drain Current (Frequency = 1500 MHz) Output P1 dB vs. Bias @+25°C 15 10 5 V, 20 mA 3 V, 6.5 mA 3 V, 5 mA 5V 3V 10 5 5 0 0 -5 -5 1.35 1.40 Frequency (GHz) Frequency (GHz) 1.40 1.45 1.50 1.55 Frequency (GHz) 7 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. -10 5 10 15 20 Drain Current (mA) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Low Noise Amplifier 1400 - 2000 MHz AM50-0006 V3 Typical Performance Curves, 1400 - 1520 MHz Noise Figure vs. Temperature (Bias = 3V, 6.5 mA) Gain vs. Temperature (Bias = 3V, 6.5 mA) 3.0 22 20 +25°C +85°C -40°C 2.5 18 2.0 16 1.5 14 1.0 12 1.30 1.35 1.40 1.45 1.50 1.55 1.60 Frequency (GHz) 8 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 0.5 1.35 +25°C +85°C -40°C 1.40 1.45 1.50 1.55 Frequency (GHz) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.