Lattice ECP2-20 Latticeecp2/m family data sheet Datasheet

LatticeECP2/M Family Data Sheet
DS1006 Version 03.3, August 2008
LatticeECP2/M Family Data Sheet
Introduction
June 2008
Data Sheet DS1006
■ Pre-Engineered Source Synchronous I/O
Features
• DDR registers in I/O cells
• Dedicated gearing logic
• Source synchronous standards support
– SPI4.2, SFI4 (DDR Mode), XGMII
– High Speed ADC/DAC devices
• Dedicated DDR and DDR2 memory support
– DDR1: 400 (200MHz) / DDR2: 533 (266MHz)
• Dedicated DQS support
■ High Logic Density for System Integration
• 6K to 95K LUTs
• 90 to 583 I/Os
■ Embedded SERDES (LatticeECP2M Only)
• Data Rates 250 Mbps to 3.125 Gbps
• Up to 16 channels per device
PCI Express, Ethernet (1GbE, SGMII), OBSAI,
CPRI and Serial RapidIO.
■ sysDSP™ Block
• 3 to 42 blocks for high performance multiply and
accumulate
• Each block supports
– One 36x36, four 18X18 or eight 9X9 multipliers
■ Programmable sysI/O™ Buffer Supports
Wide Range Of Interfaces
•
•
•
•
•
■ Flexible Memory Resources
• 55Kbits to 5308Kbits sysMEM™ Embedded
Block RAM (EBR)
– 18Kbit block
– Single, pseudo dual and true dual port
– Byte Enable Mode support
• 12K to 202Kbits distributed RAM
– Single port and pseudo dual port
■ sysCLOCK Analog PLLs and DLLs
• Two GPLLs and up to six SPLLs per device
– Clock multiply, divide, phase & delay adjust
– Dynamic PLL adjustment
• Two general purpose DLLs per device
LVTTL and LVCMOS 33/25/18/15/12
SSTL 3/2/18 I, II
HSTL15 I and HSTL18 I, II
PCI and Differential HSTL, SSTL
LVDS, RSDS, Bus-LVDS, MLVDS, LVPECL
■ Flexible Device Configuration
•
•
•
•
•
•
1149.1 Boundary Scan compliant
Dedicated bank for configuration I/Os
SPI boot flash interface
Dual boot images supported
TransFR™ I/O for simple field updates
Soft Error Detect macro embedded
■ Optional Bitstream Encryption
(LatticeECP2/M “S” Versions Only)
■ System Level Support
• ispTRACY™ internal logic analyzer capability
• On-chip oscillator for initialization & general use
• 1.2V power supply
Table 1-1. LatticeECP2 (Including “S-Series”) Family Selection Guide
Device
ECP2-6
ECP2-12
ECP2-20
ECP2-35
ECP2-50
ECP2-70
LUTs (K)
6
12
21
32
48
68
Distributed RAM (Kbits)
12
24
42
64
96
136
EBR SRAM (Kbits)
55
221
276
332
387
1032
EBR SRAM Blocks
3
12
15
18
21
60
sysDSP Blocks
3
6
7
8
18
22
18x18 Multipliers
12
24
28
32
72
88
2+0+2
2+0+2
2+0+2
2+0+2
2+2+2
2+4+2
190
297
402
450
500
583
GPLL + SPLL + DLL
Maximum Available I/O
Packages and I/O Combinations
144-pin TQFP (20 x 20 mm)
90
208-pin PQFP (28 x 28 mm)
256-ball fpBGA (17 x 17 mm)
484-ball fpBGA (23 x 23 mm)
190
93
131
131
193
193
297
331
331
339
402
450
500
672-ball fpBGA (27 x 27 mm)
900-ball fpBGA (31 x 31 mm)
500
583
© 2007 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
1-1
DS1006 Introduction_01.7
Introduction
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Table 1-2. LatticeECP2M (Including “S-Series”) Family Selection Guide
Device
ECP2M20
ECP2M35
ECP2M50
ECP2M70
ECP2M100
LUTs (K)
19
34
48
67
95
sysMEM Blocks (18kb)
66
114
225
246
288
Embedded Memory (Kbits)
1217
2101
4147
4534
5308
Distributed Memory (Kbits)
41
71
101
145
202
sysDSP Blocks
6
8
22
24
42
18x18 Multipliers
24
32
88
96
168
GPLL+SPLL+DLL
2+6+2
2+6+2
2+6+2
2+6+2
2+6+2
304
410
410
436
520
Maximum Available I/O
Packages and SERDES / I/O Combinations
256-ball fpBGA (17 x 17 mm)
4 / 140
484-ball fpBGA (23 x 23 mm)
4 / 304
672-ball fpBGA (27 x 27 mm)
4 / 140
4 / 303
4 / 270
4 / 410
8 / 372
900-ball fpBGA (31 x 31 mm)
8 / 410
1152-ball fpBGA (35 x 35 mm)
16 / 416
16 / 416
16 / 436
16 / 520
Introduction
The LatticeECP2/M family of FPGA devices is optimized to deliver high performance features such as advanced
DSP blocks, high speed SERDES (LatticeECP2M family only) and high speed source synchronous interfaces in an
economical FPGA fabric. This combination was achieved through advances in device architecture and the use of
90nm technology.
The LatticeECP2/M FPGA fabric is optimized with high performance and low cost in mind. The LatticeECP2/M
devices include LUT-based logic, distributed and embedded memory, Phase Locked Loops (PLLs), Delay Locked
Loops (DLLs), pre-engineered source synchronous I/O support, enhanced sysDSP blocks and advanced configuration support, including encryption (“S” versions only) and dual boot capabilities.
The LatticeECP2M device family features high speed SERDES with PCS. These high jitter tolerance and low transmission jitter SERDES with PCS blocks can be configured to support an array of popular data protocols including
PCI Express, Ethernet (1GbE and SGMII), OBSAI and CPRI. Transmit Pre-emphasis and Receive Equalization
settings make SERDES suitable for chip to chip and small form factor backplane applications.
The ispLEVER® design tool suite from Lattice allows large complex designs to be efficiently implemented using the
LatticeECP2/M FPGA family. Synthesis library support for LatticeECP2/M is available for popular logic synthesis
tools. The ispLEVER tool uses the synthesis tool output along with the constraints from its floor planning tools to
place and route the design in the LatticeECP2/M device. The ispLEVER tool extracts the timing from the routing
and back-annotates it into the design for timing verification.
Lattice provides many pre-engineered IP (Intellectual Property) ispLeverCORE™ modules for the LatticeECP2/M
family. By using these IP cores as standardized blocks, designers are free to concentrate on the unique aspects of
their design, increasing their productivity.
1-2
LatticeECP2/M Family Data Sheet
Architecture
August 2008
Data Sheet DS1006
Architecture Overview
Each LatticeECP2/M device contains an array of logic blocks surrounded by Programmable I/O Cells (PIC). Interspersed between the rows of logic blocks are rows of sysMEM™ Embedded Block RAM (EBR) and rows of sysDSP™ Digital Signal Processing blocks, as shown in Figure 2-1. In addition, the LatticeECP2M family contains
SERDES Quads in one or more of the corners. Figure 2-2 shows the block diagram of ECP2M20 with one quad.
There are two kinds of logic blocks, the Programmable Functional Unit (PFU) and Programmable Functional Unit
without RAM (PFF). The PFU contains the building blocks for logic, arithmetic, RAM and ROM functions. The PFF
block contains building blocks for logic, arithmetic and ROM functions. Both PFU and PFF blocks are optimized for
flexibility, allowing complex designs to be implemented quickly and efficiently. Logic Blocks are arranged in a twodimensional array. Only one type of block is used per row.
The LatticeECP2/M devices contain one or more rows of sysMEM EBR blocks. sysMEM EBRs are large dedicated
18K fast memory blocks. Each sysMEM block can be configured in a variety of depths and widths of RAM or ROM.
In addition, LatticeECP2/M devices contain up to two rows of DSP Blocks. Each DSP block has multipliers and
adder/accumulators, which are the building blocks for complex signal processing capabilities.
The LatticeECP2M devices feature up to 16 embedded 3.125Gbps SERDES (Serializer / Deserializer) channels.
Each SERDES channel contains independent 8b/10b encoding / decoding, polarity adjust and elastic buffer logic.
Each group of four SERDES channels along with its Physical Coding Sub-layer (PCS) block, creates a quad. The
functionality of the SERDES/PCS Quads can be controlled by memory cells set during device configuration or by
registers that are addressable during device operation. The registers in every quad can be programmed by a soft
IP interface, referred to as the SERDES Client Interface (SCI). These quads (up to four) are located at the corners
of the devices.
Each PIC block encompasses two PIOs (PIO pairs) with their respective sysI/O buffers. The sysI/O buffers of the
LatticeECP2/M devices are arranged in eight banks, allowing the implementation of a wide variety of I/O standards.
In addition, a separate I/O bank is provided for the programming interfaces. PIO pairs on the left and right edges of
the device can be configured as LVDS transmit/receive pairs. The PIC logic also includes pre-engineered support
to aid in the implementation of high speed source synchronous standards such as SPI4.2, along with memory
interfaces including DDR2.
Other blocks provided include PLLs, DLLs and configuration functions. The LatticeECP2/M architecture provides
two General PLLs (GPLL) and up to six Standard PLLs (SPLL) per device. In addition, each LatticeECP2/M family
member provides two DLLs per device. The GPLLs and DLLs blocks are located in pairs at the end of the bottommost EBR row; the DLL block is located towards the edge of the device. The SPLL blocks are located at the end of
the other EBR/DSP rows.
The configuration block that supports features such as configuration bit-stream decryption, transparent updates
and dual boot support is located toward the center of this EBR row. The Ball Grid Array (BGA) package devices in
the LatticeECP2/M family supports a sysCONFIG™ port located in the corner between banks four and five, which
allows for serial or parallel device configuration.
In addition, every device in the family has a JTAG port. This family also provides an on-chip oscillator and soft error
detect capability. The LatticeECP2/M devices use 1.2V as their core voltage.
© 2008 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
2-1
DS1006 Architecture_01.9
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-1. Simplified Block Diagram, ECP2-6 Device (Top Level)
Flexible sysIO Buffers:
LVCMOS, HSTL, SSTL,
LVDS, and other standards
Programmable
Function Units
(PFUs)
Pre-engineered source
synchronous support
• DDR1/2
• SPI4.2
• ADC/DAC devices
sysDSP Blocks
Multiply and
Accumulate Support
Flexible routing optimized
for speed, cost and routability
sysMEM Block RAM
18kbit Dual Port
Configuration logic, including
dual boot and encryption.
On-chip oscillator and
soft-error detection.
sysCLOCK PLLs and DLLs
Frequency Synthesis and
Clock Alignment
Configuration port
Figure 2-2. Simplified Block Diagram, ECP2M20 Device (Top Level)
SERDES
Flexible sysIO
Buffers:
LVCMOS, HSTL
SSTL, LVDS
Channel
3
Channel
2
Channel
1
Channel
0
Programmable
Function Units
(PFUs)
Pre-Engineered
Source Synchronous
Support
• DDR1/2
• SPI4.2
• ADC/DAC devices
DSP Blocks
Multiply & Accumulate
Support
sysCLOCK SPLLs
Configuration
Logic, Including
dual boot and encryption,
and soft-error detection
Flexible Routing
optimized for speed,
cost & routability
sysCLOCK GPLLs
& GDLLs
Frequency Synthesis
& Clock Alignment
sysMEM Block
RAM 18kbit Dual Port
Configuration Port
On-Chip
Oscillator
2-2
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
PFU Blocks
The core of the LatticeECP2/M device consists of PFU blocks, which are provided in two forms, the PFU and PFF.
The PFUs can be programmed to perform Logic, Arithmetic, Distributed RAM and Distributed ROM functions. PFF
blocks can be programmed to perform Logic, Arithmetic and ROM functions. Except where necessary, the remainder of this data sheet will use the term PFU to refer to both PFU and PFF blocks.
Each PFU block consists of four interconnected slices, numbered 0-3 as shown in Figure 2-3. All the interconnections to and from PFU blocks are from routing. There are 50 inputs and 23 outputs associated with each PFU block.
Figure 2-3. PFU Diagram
From
Routing
LUT4 &
CARRY
LUT4 &
CARRY
LUT4 &
CARRY
Slice 0
LUT4 &
CARRY
Slice 1
D
FF
LUT4 &
CARRY
D
D
FF
LUT4
D
FF
FF
LUT4
Slice 3
Slice 2
D
FF
LUT4 &
CARRY
D
FF
To
Routing
Slice
Slice 0 through Slice 2 contain two LUT4s feeding two registers, whereas Slice 3 contains two LUT4s only. For
PFUs, Slice 0 and Slice 2 can also be configured as distributed memory, a capability not available in the PFF.
Table 2-1 shows the capability of the slices in both PFF and PFU blocks along with the operation modes they
enable. In addition, each PFU contains some logic that allows the LUTs to be combined to perform functions such
as LUT5, LUT6, LUT7 and LUT8. There is control logic to perform set/reset functions (programmable as synchronous/asynchronous), clock select, chip-select and wider RAM/ROM functions. Figure 2-4 shows an overview of the
internal logic of the slice. The registers in the slice can be configured for positive/negative and edge triggered or
level sensitive clocks.
Table 2-1. Resources and Modes Available per Slice
PFU BLock
PFF Block
Slice
Resources
Modes
Resources
Modes
Slice 0
2 LUT4s and 2 Registers
Logic, Ripple, RAM, ROM
2 LUT4s and 2 Registers
Logic, Ripple, ROM
Slice 1
2 LUT4s and 2 Registers
Logic, Ripple, ROM
2 LUT4s and 2 Registers
Logic, Ripple, ROM
Slice 2
2 LUT4s and 2 Registers
Logic, Ripple, RAM, ROM
2 LUT4s and 2 Registers
Logic, Ripple, ROM
Slice 3
2 LUT4s
Logic, ROM
2 LUT4s
Logic, ROM
Slices 0, 1 and 2 have 14 input signals: 13 signals from routing and one from the carry-chain (from the adjacent
slice or PFU). There are seven outputs: six to routing and one to carry-chain (to the adjacent PFU). Slice 3 has 13
input signals from routing and four signals to routing. Table 2-2 lists the signals associated with Slice 0 to Slice 2.
2-3
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-4. Slice Diagram
FCO To Different Slice/PFU
SLICE
FXB
FXA
OFX1
A1
B1
C1
D1
CO
F1
F/SUM
D
LUT4 &
CARRY*
Q1
FF*
To
Routing
CI
M1
M0
LUT5
Mux
From
Routing
OFX0
A0
B0
C0
D0
CO
LUT4 &
CARRY*
F0
F/SUM
Q0
D
FF*
CI
CE
CLK
LSR
* Not in Slice 3
FCI From Different Slice/PFU
For Slices 0 and 2, memory control signals are generated from Slice 1 as follows:
WCK is CLK
WRE is from LSR
DI[3:2] for Slice 2 and DI[1:0] for Slice 0 data
WAD [A:D] is a 4bit address from slice 1 LUT input
Table 2-2. Slice Signal Descriptions
Function
Type
Signal Names
Input
Data signal
A0, B0, C0, D0
Input
Data signal
A1, B1, C1, D1
Input
Multi-purpose
M0
Description
Inputs to LUT4
Inputs to LUT4
Multipurpose Input
Input
Multi-purpose
M1
Multipurpose Input
Input
Control signal
CE
Clock Enable
Input
Control signal
LSR
Local Set/Reset
Input
Control signal
CLK
System Clock
Input
Inter-PFU signal
FC
Fast Carry-in1
Input
Inter-slice signal
FXA
Intermediate signal to generate LUT6 and LUT7
Intermediate signal to generate LUT6 and LUT7
Input
Inter-slice signal
FXB
Output
Data signals
F0, F1
Output
Data signals
Q0, Q1
Output
Data signals
OFX0
Output of a LUT5 MUX
Output
Data signals
OFX1
Output of a LUT6, LUT7, LUT82 MUX depending on the slice
Output
Inter-PFU signal
FCO
Slice 2 of each PFU is the fast carry chain output1
LUT4 output register bypass signals
Register outputs
1. See Figure 2-4 for connection details.
2. Requires two PFUs.
2-4
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Modes of Operation
Each slice has up to four potential modes of operation: Logic, Ripple, RAM and ROM.
Logic Mode
In this mode, the LUTs in each slice are configured as 4-input combinatorial lookup tables. A LUT4 can have 16
possible input combinations. Any four input logic functions can be generated by programming this lookup table.
Since there are two LUT4s per slice, a LUT5 can be constructed within one slice. Larger look-up tables such as
LUT6, LUT7 and LUT8 can be constructed by concatenating other slices. Note LUT8 requires more than four
slices.
Ripple Mode
Ripple mode supports the efficient implementation of small arithmetic functions. In ripple mode, the following functions can be implemented by each slice:
• Addition 2-bit
• Subtraction 2-bit
• Add/Subtract 2-bit using dynamic control
• Up counter 2-bit
• Down counter 2-bit
• Up/Down counter with Async clear
• Up/Down counter with preload (sync)
• Ripple mode multiplier building block
• Multiplier support
• Comparator functions of A and B inputs
– A greater-than-or-equal-to B
– A not-equal-to B
– A less-than-or-equal-to B
Ripple Mode includes an optional configuration that performs arithmetic using fast carry chain methods. In this configuration (also referred to as CCU2 mode) two additional signals, Carry Generate and Carry Propagate, are generated on a per slice basis to allow fast arithmetic functions to be constructed by concatenating Slices.
RAM Mode
In this mode, a 16x4-bit distributed single port RAM (SPR) can be constructed using each LUT block in Slice 0 and
Slice 2 as a 16x1-bit memory. Slice 1 is used to provide memory address and control signals. A 16x2-bit pseudo
dual port RAM (PDPR) memory is created by using one Slice as the read-write port and the other companion slice
as the read-only port.
The Lattice design tools support the creation of a variety of different size memories. Where appropriate, the software will construct these using distributed memory primitives that represent the capabilities of the PFU. Table 2-3
shows the number of slices required to implement different distributed RAM primitives. For more information about
using RAM in LatticeECP2/M devices, please see the list of additional technical documentation at the end of this
data sheet.
Table 2-3. Number of Slices Required to Implement Distributed RAM
Number of slices
SPR 16X4
PDPR 16X4
3
3
Note: SPR = Single Port RAM, PDPR = Pseudo Dual Port RAM
2-5
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
ROM Mode
ROM mode uses the LUT logic; hence, Slices 0 through 3 can be used in ROM mode. Preloading is accomplished
through the programming interface during PFU configuration.
Routing
There are many resources provided in the LatticeECP2/M devices to route signals individually or as busses with
related control signals. The routing resources consist of switching circuitry, buffers and metal interconnect (routing)
segments.
The inter-PFU connections are made with x1 (spans two PFU), x2 (spans three PFU) and x6 (spans seven PFU).
The x1 and x2 connections provide fast and efficient connections in horizontal and vertical directions. The x2 and
x6 resources are buffered, allowing the routing of both short and long connections between PFUs.
The LatticeECP2/M family has an enhanced routing architecture that produces a compact design. The ispLEVER
design tool suite takes the output of the synthesis tool and places and routes the design. Generally, the place and
route tool is completely automatic, although an interactive routing editor is available to optimize the design.
sysCLOCK Phase Locked Loops (GPLL/SPLL)
The sysCLOCK PLLs provide the ability to synthesize clock frequencies. All the devices in the LatticeECP2/M family support two General Purpose PLLs (GPLLs) which are full-featured PLLs. In addition, some of the larger
devices have two to six Standard PLLs (SPLLs) that have a subset of GPLL functionality.
General Purpose PLL (GPLL)
The architecture of the GPLL is shown in Figure 2-5. A description of the GPLL functionality follows.
CLKI is the reference frequency (generated either from the pin or from routing) for the PLL. CLKI feeds into the
Input Clock Divider block. The CLKFB is the feedback signal (generated from CLKOP or from a user clock PIN/
logic). This signal feeds into the Feedback Divider. The Feedback Divider is used to multiply the reference frequency.
The Delay Adjust Block adjusts either the delays of the reference or feedback signals. The Delay Adjust Block can
either be programmed during configuration or can be adjusted dynamically. The setup, hold or clock-to-out times of
the device can be improved by programming a delay in the feedback or input path of the PLL, which will advance or
delay the output clock with reference to the input clock.
Following the Delay Adjust Block, both the input path and feedback signals enter the Voltage Controlled Oscillator
(VCO) block. In this block the difference between the input path and feedback signals is used to control the frequency and phase of the oscillator. A LOCK signal is generated by the VCO to indicate that the VCO has locked
onto the input clock signal. In dynamic mode, the PLL may lose lock after a dynamic delay adjustment and not
relock until the tLOCK parameter has been satisfied. LatticeECP2/M devices have two dedicated pins on the left and
right edges of the device for connecting optional external capacitors to the VCO. This allows the PLLs to operate at
a lower frequency. This is a shared resource that can only be used by one PLL (GPLL or SPLL) per side.
The output of the VCO then enters the post-scalar divider. The post-scalar divider allows the VCO to operate at
higher frequencies than the clock output (CLKOP), thereby increasing the frequency range. A secondary divider
takes the CLKOP signal and uses it to derive lower frequency outputs (CLKOK). The Phase/Duty Select block
adjusts the phase and duty cycle of the CLKOP signal and generates the CLKOS signal. The phase/duty cycle setting can be pre-programmed or dynamically adjusted.
The primary output from the post scalar divider CLKOP along with the outputs from the secondary divider (CLKOK)
and Phase/Duty select (CLKOS) are fed to the clock distribution network.
2-6
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-5. General Purpose PLL (GPLL) Diagram
Dynamic Adjustment
Dynamic Delay Adjustment
Input Clock
Divider
(CLKI)
CLKI
(from routing or external pin)
CLKOS
Delay
Adjust
Feedback
Divider
(CLKFB)
CLKFB
from CLKOP (PLL internal),
from clock net(CLKOP) or from
a user clock (pin or logic)
LOCK
Voltage
Controlled
Oscillator
Post Scalar
Divider
(CLKOP)
Phase/Duty
Select
CLKOP
CLKOK
RST
Secondary
Divider
(CLKOK)
RSTK
PLLCAP External Pin
(Optional External Capacitor)
Standard PLL (SPLL)
Some of the larger devices have two to six Standard PLLs (SPLLs). SPLLs have the same features as GPLLs but
without delay adjustment capability. SPLLs also provide different parametric specifications. For more information,
please see the list of additional technical documentation at the end of this data sheet.
Table 2-4 provides a description of the signals in the GPLL and SPLL blocks.
Table 2-4. GPLL and SPLL Blocks Signal Descriptions
Signal
I/O
Description
CLKI
I
Clock input from external pin or routing
CLKFB
I
PLL feedback input from CLKOP (PLL internal), from clock net (CLKOP) or from a user clock
(PIN or logic)
RST
I
“1” to reset PLL counters, VCO, charge pumps and M-dividers
RSTK
I
“1” to reset K-divider
CLKOS
O
PLL output clock to clock tree (phase shifted/duty cycle changed)
CLKOP
O
PLL output clock to clock tree (no phase shift)
CLKOK
O
PLL output to clock tree through secondary clock divider
LOCK
O
“1” indicates PLL LOCK to CLKI
DDAMODE1
I
Dynamic Delay Enable. “1”: Pin control (dynamic), “0”: Fuse Control (static)
DDAIZR1
I
Dynamic Delay Zero. “1”: delay = 0, “0”: delay = on
DDAILAG1
I
Dynamic Delay Lag/Lead. “1”: Lead, “0”: Lag
DDAIDEL[2:0]1
I
Dynamic Delay Input
DPA MODES
I
DPA (Dynamic Phase Adjust/Duty Cycle Select) mode
DPHASE [3:0]
I
DPA Phase Adjust inputs
DDDUTY [3:0]
—
DPA Duty Cycle Select inputs
1. These signals are not available in SPLL.
2-7
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Delay Locked Loops (DLL)
In addition to PLLs, the LatticeECP2/M family of devices has two DLLs per device.
CLKI is the input frequency (generated either from the pin or routing) for the DLL. CLKI feeds into the output muxes
block to bypass the DLL, directly to the DELAY CHAIN block and (directly or through divider circuit) to the reference
input of the Phase Frequency Detector (PFD) input mux. The reference signal for the PFD can also be generated
from the Delay Chain and CLKFB signals. The feedback input to the PFD is generated from the CLKFB pin, CLKI
or from tapped signal from the Delay chain.
The PFD produces a binary number proportional to the phase and frequency difference between the reference and
feedback signals. This binary output of the PFD is fed into a Arithmetic Logic Unit (ALU). Based on these inputs,
the ALU determines the correct digital control codes to send to the delay chain in order to better match the reference and feedback signals. This digital code from the ALU is also transmitted via the Digital Control bus (DCNTL)
bus to its associated DLLDELA delay block. The ALUHOLD input allows the user to suspend the ALU output at its
current value. The UDDCNTL signal allows the user to latch the current value on the DCNTL bus.
The DLL has two independent clock outputs, CLKOP and CLKOS. These outputs can individually select one of the
outputs from the tapped delay line. The CLKOS has optional fine phase shift and divider blocks to allow this output
to be further modified, if required. The fine phase shift block allows the CLKOS output to phase shifted a further 45,
22.5 or 11.25 degrees relative to its normal position. Both the CLKOS and CLKOP outputs are available with
optional duty cycle correction. Divide by two and divide by four frequencies are available at CLKOS. The LOCK output signal is asserted when the DLL is locked. Figure 2-6 shows the DLL block diagram and Table 2-5 provides a
description of the DLL inputs and outputs.
The user can configure the DLL for many common functions such as time reference delay mode and clock injection
removal mode. Lattice provides primitives in its design tools for these functions. For more information about the
DLL, please see the list of additional technical documentation at the end of this data sheet.
Figure 2-6. Delay Locked Loop Diagram (DLL)
Delay Chain
ALUHOLD
Duty
Cycle
50%
Delay0
CLKOP
Delay1
÷4
÷2
(from routing
or external pin)
CLKI
from CLKOP (DLL
internal), from clock net
(CLKOP) or from a user
clock (pin or logic)
Output
Muxes
Delay2
Reference
Phase
Frequency
Detector
Duty
Cycle
50%
Delay3
Arithmetic
Logic Unit
CLKOS
÷4
÷2
Delay4
Feedback
Lock
Detect
CLKFB
UDDCNTL
RSTN
2-8
LOCK
Digital
Control
Output
9
DCNTL
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Table 2-5. DLL Signals
Signal
I/O
Description
CLKI
I
Clock input from external pin or routing
CLKFB
I
DLL feed input from DLL output, clock net, routing or external pin
RSTN
I
Active low synchronous reset
ALUHOLD
I
Active high freezes the ALU
UDDCNTL
I
Synchronous enable signal (hold high for two cycles) from routing
DCNTL[8:0]
O
Encoded digital control signals for PIC INDEL and slave delay calibration
CLKOP
O
The primary clock output
CLKOS
O
The secondary clock output with fine phase shift and/or division by 2 or by 4
LOCK
O
Active high phase lock indicator
DLLDELA Delay Block
Closely associated with each DLL is a DLLDELA block. This is a delay block consisting of a delay line with taps and
a selection scheme that selects one of the taps. The DCNTL[8:0] bus controls the delay of the CLKO signal. Typically this is the delay setting that the DLL uses to achieve phase alignment. This results in the delay providing a calibrated 90° phase shift that is useful in centering a clock in the middle of a data cycle for source synchronous data.
The CLKO signal feeds the edge clock network. Figure 2-7 shows the connections between the DLL block and the
DLLDELA delay block. For more information, please see the list of additional technical documentation at the end of
this data sheet.
Figure 2-7. DLLDELA Delay Block
PLL_PIO
Routing
Routing
*
CLKOP
CLKI
DLL_PIO
CLKOS
DLL Block
CLKFB_CK
CLKOP
GDLLFB_PIO
*
LOCK
CLKFB
ECLK1
DCNTL[8:0]
*
CLKI
DLLDELA Delay Block
CLKO
* Software selectable
PLL/DLL Cascading
LatticeECP2/M devices have been designed to allow certain combinations of PLL (GPLL and SPLL) and DLL cascading. The allowable combinations are:
• PLL to PLL supported
• PLL to DLL supported
2-9
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
The DLLs in the LatticeECP2/M are used to shift the clock in relation to the data for source synchronous inputs.
PLLs are used for frequency synthesis and clock generation for source synchronous interfaces. Cascading PLL
and DLL blocks allows applications to utilize the unique benefits of both DLLs and PLLs.
For further information about the DLL, please see the list of additional technical documentation at the end of this
data sheet.
GPLL/SPLL/GDLL PIO Input Pin Connections (LatticeECP2M Family Only)
All LatticeECP2M devices contain two GDLLs, two GPLLs and six SPLLs, arranged in quadrants as shown in
Figure 2-8. In the LatticeECP2M devices GPLLs, SPLLs and GDLLs share their input pins. Figure 2-8 shows the
sharing of SPLLs input pin connections in the upper two quadrants and the sharing of GDLL, GPLL and SPLL input
pin connections in the lower two quadrants.
Figure 2-8. Sharing of PIO Pins by GPLL, SPLL and GDLL in LatticeECP2M Devices
SPLL_PIO
SPLL_PIO
GPLL_PIO
GDLL_PIO
SPLL_PIO
SPLL
SPLL
SPLL
SPLL
Upper Left Quadrant
Upper Right Quadrant
Lower Left Quadrant
Lower Right Quadrant
GPLL
GPLL
GDLL
GDLL
SPLL
SPLL
SPLL_PIO
SPLL_PIO
GPLL_PIO
GDLL_PIO
SPLL_PIO
Clock Dividers
LatticeECP2/M devices have two clock dividers, one on the left side and one on the right side of the device. These
are intended to generate a slower-speed system clock from a high-speed edge clock. The block operates in a ÷2,
÷4 or ÷8 mode and maintains a known phase relationship between the divided down clock and the high-speed
clock based on the release of its reset signal. The clock dividers can be fed from selected PLL/DLL outputs, DLLDELA delay blocks, routing or from an external clock input. The clock divider outputs serve as primary clock
sources and feed into the clock distribution network. The Reset (RST) control signal resets input and synchronously forces all outputs to low. The RELEASE signal releases outputs synchronously to the input clock. For further
information about clock dividers, please see the list of additional technical documentation at the end of this data
sheet. Figure 2-9 shows the clock divider connections.
2-10
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-9. Clock Divider Connections
PLL PAD
Routing
CLKO
CLKOP (GPLL)
÷1
CLKOP (DLL)
CLKOS (GPLL)
÷2
CLKOS (DLL)
CLKDIV
÷4
RST
÷8
RELEASE
Clock Distribution Network
LatticeECP2/M devices have eight quadrant-based primary clocks and eight flexible region-based secondary
clocks/control signals. Two high performance edge clocks are available on each edge of the device to support high
speed interfaces. These clock inputs are selected from external I/Os, the sysCLOCK PLLs, DLLs or routing. These
clock inputs are fed throughout the chip via a clock distribution system.
Primary Clock Sources
LatticeECP2/M devices derive clocks from five primary sources: PLL (GPLL and SPLL) outputs, DLL outputs,
CLKDIV outputs, dedicated clock inputs and routing. LatticeECP2/M devices have two to eight sysCLOCK PLLs
and two DLLs, located on the left and right sides of the device. There are eight dedicated clock inputs, two on each
side of the device, with the exception of the LatticeECP2M 256-fpBGA package devices which have six dedicated
clock inputs on the device. Figure 2-10 shows the primary clock sources.
2-11
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-10. Primary Clock Sources for ECP2-50
Clock Input
Clock Input
From Routing
PLL Input
SPLL
SPLL
CLK
DIV
CLK
DIV
Clock
Input
PLL Input
Clock
Input
Primary Clock Sources
to Eight Quadrant Clock Selection
Clock
Input
Clock
Input
DLL Input
DLL
DLL
DLL Input
PLL Input
GPLL
GPLL
PLL Input
From Routing
Clock Input
Clock Input
Note: This diagram shows sources for the ECP2-50 device. Smaller LatticeECP2 devices have fewer SPLLs. All LatticeECP2M device
have six SPLLs.
2-12
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Secondary Clock/Control Sources
LatticeECP2/M devices derive secondary clocks (SC0 through SC7) from eight dedicated clock input pads and the
rest from routing. Figure 2-11 shows the secondary clock sources.
Figure 2-11. Secondary Clock Sources
Clock
Input
From
Routing
Clock
Input
From
Routing
From
Routing
From
Routing
From Routing
From Routing
From Routing
From Routing
Clock Input
Clock Input
Secondary Clock Sources
Clock Input
Clock Input
From Routing
From Routing
From Routing
From Routing
From
Routing
From
Routing
From
Routing
Clock
Input
Clock
Input
2-13
From
Routing
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Edge Clock Sources
Edge clock resources can be driven from a variety of sources at the same edge. Edge clock resources can be
driven from adjacent edge clock PIOs, primary clock PIOs, PLLs/DLLs and clock dividers as shown in Figure 2-12.
Figure 2-12. Edge Clock Sources
Clock Input
Clock Input
From
Routing
From
Routing
Sources for top
edge clocks
From Routing
From Routing
Clock
Input
Clock
Input
Clock
Input
Clock
Input
From Routing
DLLDELA
Eight Edge Clocks (ECLK)
Two Clocks per Edge
From Routing
DLLDELA
DLL
Input
DLL
DLL
DLL
Input
PLL
Input
GPLL
GPLL
PLL
Input
Sources for right edge clocks
Sources for left edge clocks
Sources for
bottom edge
clocks
From
Routing
From
Routing
Clock Input
Clock Input
2-14
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Primary Clock Routing
The clock routing structure in LatticeECP2/M devices consists of a network of eight primary clock lines (CLK0
through CLK7) per quadrant. The primary clocks of each quadrant are generated from muxes located in the center
of the device. All the clock sources are connected to these muxes. Figure 2-13 shows the clock routing for one
quadrant. Each quadrant mux is identical. If desired, any clock can be routed globally
Figure 2-13. Per Quadrant Primary Clock Selection
Primary Clock Sources: PLLs + DLLs + CLKDIVs + PIOs + Routing
35:1
35:1
35:1
35:1
35:1
35:1
32:1
32:1
DCS
CLK0
CLK1
CLK2
CLK3
CLK4
CLK5
CLK6
32:1
32:1
DCS
CLK7
8 Primary Clocks (CLK0 to CLK7) per Quadrant
Dynamic Clock Select (DCS)
The DCS is a smart multiplexer function available in the primary clock routing. It switches between two independent
input clock sources without any glitches or runt pulses. This is achieved regardless of when the select signal is toggled. There are two DCS blocks per quadrant; in total, there are eight DCS blocks per device. The inputs to the
DCS block come from the center muxes. The output of the DCS is connected to primary clocks CLK6 and CLK7
(see Figure 2-13).
Figure 2-14 shows the timing waveforms of the default DCS operating mode. The DCS block can be programmed
to other modes. For more information about the DCS, please see the list of additional technical documentation at
the end of this data sheet.
Figure 2-14. DCS Waveforms
CLK0
CLK1
SEL
DCSOUT
Secondary Clock/Control Routing
Secondary clocks in the LatticeECP2 devices are region-based resources. The benefit of region-based resources
is the relatively low injection delay and skew within the region, as compared to primary clocks. EBR/DSP rows and
a special vertical routing channel bound the secondary clock regions. This special vertical routing channel aligns
with either the left edge of the center DSP block in the DSP row or the center of the DSP row. Figure 2-15 shows
2-15
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
this special vertical routing channel and the eight secondary clock regions for the ECP2-50. LatticeECP2 devices
have four secondary clocks (SC0 to SC3) which are distrubed to every region.
The secondary clock muxes are located in the center of the device. Figure 2-16 shows the mux structure of the
secondary clock routing. Secondary clocks SC0 to SC3 are used for clock and control and SC4 to SC7 are used for
high fan-out signals.
Figure 2-15. Secondary Clock Regions ECP2-50
I/O Bank 0
I/O Bank 1
Vertical Routing
Channel Regional
Boundary
Secondary Clock
Region 5
Secondary Clock
Region 2
Secondary Clock
Region 6
Secondary Clock
Region 3
Secondary Clock
Region 7
Secondary Clock
Region 4
Secondary Clock
Region 8
I/O Bank 5
I/O Bank 4
I/O Bank 3
I/O Bank 6
I/O Bank 2
I/O Bank 7
Secondary Clock
Region 1
DSP Row
Regional
Boundary
EBR Row
Regional
Boundary
Bank 8
2-16
DSP Row
Regional
Boundary
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-16. Secondary Clock Selection
Secondary Clock Feedlines: 8 PIOs + 16 Routing
24:1
SC0
24:1
SC1
24:1
SC2
24:1
SC3
24:1
SC4
24:1
SC5
24:1
SC6
24:1
SC7
4 Secondary Clocks/CE/LSR (SC0 to SC3) per Region
Clock/Control
4 High Fan-out Data Signals (SC4 to SC7) per Region
High Fan-out Data
Slice Clock Selection
Figure 2-17 shows the clock selections and Figure 2-18 shows the control selections for Slice0 through Slice2. All
the primary clocks and the four secondary clocks are routed to this clock selection mux. Other signals can be used
as a clock input to the slices via routing. Slice controls are generated from the secondary clocks or other signals
connected via routing.
If none of the signals are selected for both clock and control then the default value of the mux output is 1. Slice 3
does not have any registers; therefore it does not have the clock or control muxes.
Figure 2-17. Slice0 through Slice2 Clock Selection
Primary Clock
8
Secondary Clock
Clock to Slice
4
25:1
Routing
12
Vcc
1
2-17
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-18. Slice0 through Slice2 Control Selection
Secondary Clock
3
Slice Control
Routing
16:1
12
Vcc
1
Edge Clock Routing
LatticeECP2/M devices have a number of high-speed edge clocks that are intended for use with the PIOs in the
implementation of high-speed interfaces. There are eight edge clocks per device: two edge clocks per edge. Different PLL and DLL outputs are routed to the two muxes on the left and right sides of the device. In addition, the
CLKO signal (generated from the DLLDELA block) is routed to all the edge clock muxes on the left and right sides
of the device. Figure 2-19 shows the selection muxes for these clocks.
Figure 2-19. Edge Clock Mux Connections
Top and Bottom
Edge Clocks
ECLK1/ ECLK2
Clock Input Pad
(Both Mux)
Routing
Input Pad
Left and Right
Edge Clocks
ECLK1
GPLL Input Pad
DLL Output CLKOP
GPLL Output CLKOP
Routing
CLKO
Input Pad
Left and Right
Edge Clocks
ECLK2
GPLL Input Pad
DLL Output CLKOS
GPLL Output CLKOS
Routing
CLKO
2-18
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
sysMEM Memory
LatticeECP2/M devices contains a number of sysMEM Embedded Block RAM (EBR). The EBR consists of an 18Kbit RAM with dedicated input and output registers.
sysMEM Memory Block
The sysMEM block can implement single port, dual port or pseudo dual port memories. Each block can be used in
a variety of depths and widths as shown in Table 2-6. FIFOs can be implemented in sysMEM EBR blocks by implementing support logic with PFUs. The EBR block facilitates parity checking by supporting an optional parity bit for
each data byte. EBR blocks provide byte-enable support for configurations with18-bit and 36-bit data widths.
Table 2-6. sysMEM Block Configurations
Memory Mode
Configurations
Single Port
16,384 x 1
8,192 x 2
4,096 x 4
2,048 x 9
1,024 x 18
512 x 36
True Dual Port
16,384 x 1
8,192 x 2
4,096 x 4
2,048 x 9
1,024 x 18
Pseudo Dual Port
16,384 x 1
8,192 x 2
4,096 x 4
2,048 x 9
1,024 x 18
512 x 36
Bus Size Matching
All of the multi-port memory modes support different widths on each of the ports. The RAM bits are mapped LSB
word 0 to MSB word 0, LSB word 1 to MSB word 1, and so on. Although the word size and number of words for
each port varies, this mapping scheme applies to each port.
RAM Initialization and ROM Operation
If desired, the contents of the RAM can be pre-loaded during device configuration. By preloading the RAM block
during the chip configuration cycle and disabling the write controls, the sysMEM block can also be utilized as a
ROM.
Memory Cascading
Larger and deeper blocks of RAM can be created using EBR sysMEM Blocks. Typically, the Lattice design tools
cascade memory transparently, based on specific design inputs.
Single, Dual and Pseudo-Dual Port Modes
In all the sysMEM RAM modes the input data and address for the ports are registered at the input of the memory
array. The output data of the memory is optionally registered at the output.
EBR memory supports two forms of write behavior for single port or dual port operation:
1. Normal – Data on the output appears only during a read cycle. During a write cycle, the data (at the current
address) does not appear on the output. This mode is supported for all data widths.
2-19
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
2. Write Through – A copy of the input data appears at the output of the same port during a write cycle. This mode
is supported for all data widths.
Memory Core Reset
The memory array in the EBR utilizes latches at the A and B output ports. These latches can be reset asynchronously or synchronously. RSTA and RSTB are local signals, which reset the output latches associated with Port A
and Port B, respectively. The Global Reset (GSRN) signal resets both ports. The output data latches and associated resets for both ports are as shown in Figure 2-20.
Figure 2-20. Memory Core Reset
Memory Core
D
SET
Q
Port A[17:0]
LCLR
Output Data
Latches
D
SET
Q
Port B[17:0]
LCLR
RSTA
RSTB
GSRN
Programmable Disable
For further information about the sysMEM EBR block, please see the the list of additional technical documentation
at the end of this data sheet.
EBR Asynchronous Reset
EBR asynchronous reset or GSR (if used) can only be applied if all clock enables are low for a clock cycle before the
reset is applied and released a clock cycle after the reset is released, as shown in Figure 2-21. The GSR input to the
EBR is always asynchronous.
Figure 2-21. EBR Asynchronous Reset (Including GSR) Timing Diagram
Reset
Clock
Clock
Enable
If all clock enables remain enabled, the EBR asynchronous reset or GSR may only be applied and released after
the EBR read and write clock inputs are in a steady state condition for a minimum of 1/fMAX (EBR clock). The reset
release must adhere to the EBR synchronous reset setup time before the next active read or write clock edge.
2-20
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
If an EBR is pre-loaded during configuration, the GSR input must be disabled or the release of the GSR during
device Wake Up must occur before the release of the device I/Os becomes active.
These instructions apply to all EBR RAM and ROM implementations.
Note that there are no reset restrictions if the EBR synchronous reset is used and the EBR GSR input is disabled.
sysDSP™ Block
The LatticeECP2/M family provides a sysDSP block, making it ideally suited for low cost, high performance Digital
Signal Processing (DSP) applications. Typical functions used in these applications are Finite Impulse Response
(FIR) filters, Fast Fourier Transforms (FFT) functions, Correlators, Reed-Solomon/Turbo/Convolution encoders and
decoders. These complex signal processing functions use similar building blocks such as multiply-adders and multiply-accumulators.
sysDSP Block Approach Compared to General DSP
Conventional general-purpose DSP chips typically contain one to four (Multiply and Accumulate) MAC units with
fixed data-width multipliers; this leads to limited parallelism and limited throughput. Their throughput is increased by
higher clock speeds. The LatticeECP2/M, on the other hand, has many DSP blocks that support different datawidths. This allows the designer to use highly parallel implementations of DSP functions. The designer can optimize the DSP performance vs. area by choosing an appropriate level of parallelism. Figure 2-22 compares the fully
serial and the mixed parallel and serial implementations.
Figure 2-22. Comparison of General DSP and LatticeECP2/M Approaches
Operand
A
Operand
A
Operand
A
Operand
B
Operand
A
Single
Multiplier
Operand
B
Operand
B
Operand
B
x
M loops
x
Multiplier 0
Multiplier 1
x
Accumulator
(k adds)
Function implemented in
General purpose DSP
x
m/k
loops
Multiplier k
+
m/k
accumulate
Output
Function implemented
in LatticeECP2/M
sysDSP Block Capabilities
The sysDSP block in the LatticeECP2/M family supports four functional elements in three 9, 18 and 36 data path
widths. The user selects a function element for a DSP block and then selects the width and type (signed/unsigned)
of its operands. The operands in the LatticeECP2/M family sysDSP Blocks can be either signed or unsigned but not
mixed within a function element. Similarly, the operand widths cannot be mixed within a block. In the LatticeECP2/
M family the DSP elements can be concatenated.
The resources in each sysDSP block can be configured to support the following four elements:
2-21
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
• MULT (Multiply)
• MAC (Multiply, Accumulate)
• MULTADDSUB (Multiply, Addition/Subtraction)
• MULTADDSUBSUM (Multiply, Addition/Subtraction, Accumulate)
The number of elements available on each block depends in the width selected from the three available options x9,
x18, and x36. A number of these elements are concatenated for highly parallel implementations of DSP functions.
Table 2-7 shows the capabilities of the block.
Table 2-7. Maximum Number of Elements in a Block
Width of Multiply
x9
x18
x36
MULT
8
4
1
MAC
2
2
—
MULTADDSUB
4
2
—
MULTADDSUBSUM
2
1
—
Some options are available in four elements. The input register in all the elements can be directly loaded or can be
loaded as a shift register from previous operand registers. By selecting “dynamic operation” the following operations are possible:
• In the ‘Signed/Unsigned’ options the operands can be switched between signed and unsigned on every cycle.
• In the ‘Add/Sub’ option the Accumulator can be switched between addition and subtraction on every cycle.
• The loading of operands can switch between parallel and serial operations.
2-22
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
MULT sysDSP Element
This multiplier element implements a multiply with no addition or accumulator nodes. The two operands, A and B,
are multiplied and the result is available at the output. The user can enable the input/output and pipeline registers.
Figure 2-23 shows the MULT sysDSP element.
Figure 2-23. MULT sysDSP Element
Shift Register B In
Shift Register A In
Multiplier
m
m
n
n
m
Input Data
Register A
n
m
Multiplier
n
Input Data
Register B
x
m+n
(default)
Output
Register
Multiplicand
Pipeline
Register
m
n
Signed A
Input
Register
To
Multiplier
Signed B
Input
Register
To
Multiplier
CLK (CLK0,CLK1,CLK2,CLK3)
CE (CE0,CE1,CE2,CE3)
RST(RST0,RST1,RST2,RST3)
Shift Register B Out
Shift Register A Out
2-23
m+n
Output
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
MAC sysDSP Element
In this case, the two operands, A and B, are multiplied and the result is added with the previous accumulated value.
This accumulated value is available at the output. The user can enable the input and pipeline registers, but the output register is always enabled. The output register is used to store the accumulated value. The Accumulators in the
DSP blocks in the LatticeECP2/M family can be initialized dynamically. A registered overflow signal is also available. The overflow conditions are provided later in this document. Figure 2-24 shows the MAC sysDSP element.
Figure 2-24. MAC sysDSP
Serial Register B in
Serial Register A in
Multiplicand
m
Preload
m
Accumulator
Input Data
Register A
n
Input Data
Register B
m
Multiplier
n
x
m+n
(default)
Pipeline
Register
n
n
Signed A
Input
Register
Pipeline
Register
To Accumulator
Signed B
Input
Register
Pipeline
Register
To Accumulator
Addn
Input
Register
Pipeline
Register
To Accumulator
Accumsload
Input
Register
Pipeline
Register
To Accumulator
m+n+16
(default)
Output
Register
m
n
n
m+n+16
(default)
Output
Register
Multiplier
CLK (CLK0,CLK1,CLK2,CLK3)
CE (CE0,CE1,CE2,CE3)
RST(RST0,RST1,RST2,RST3)
SROB
SROA
2-24
Output
Overflow
signal
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
MULTADDSUB sysDSP Element
In this case, the operands A0 and B0 are multiplied and the result is added/subtracted with the result of the multiplier operation of operands A1 and A2. The user can enable the input, output and pipeline registers. Figure 2-25
shows the MULTADDSUB sysDSP element.
Figure 2-25. MULTADDSUB
Shift Register B In
Shift Register A In
Multiplicand A0
m
CLK (CLK0,CLK1,CLK2,CLK3)
m
CE (CE0,CE1,CE2,CE3)
Multiplier B0
n
n
RST(RST0,RST1,RST2,RST3)
m
Input Data
Register A
n
Multiplier
m
x
n
Input Data
Register B
Pipeline
Register
m
m+n
(default)
Add/Sub
Multiplicand A1
Multiplier B1
m
m+n+1
(default)
m
n
Input Data
Register A
n
Signed B
Addn
Shift Register B Out
n
x
n
Input Data
Register B
Signed A
Multiplier
m
Pipeline
Register
m
Input
Register
Pipeline
Pipe
Register
Reg
To Add/Sub
Input
Register
Pipeline
Pipe
Register
Reg
To Add/Sub
Input
Register
Pipeline
Pipe
Register
Reg
To Add/Sub
Shift Register A Out
2-25
m+n
(default)
Output
Register
n
Output
m+n+1
(default)
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
MULTADDSUBSUM sysDSP Element
In this case, the operands A0 and B0 are multiplied and the result is added/subtracted with the result of the multiplier operation of operands A1 and B1. Additionally the operands A2 and B2 are multiplied and the result is added/
subtracted with the result of the multiplier operation of operands A3 and B3. The result of both addition/subtraction
are added in a summation block. The user can enable the input, output and pipeline registers. Figure 2-26 shows
the MULTADDSUBSUM sysDSP element.
Figure 2-26. MULTADDSUBSUM
Shift Register B In
Shift Register A In
Multiplicand A0
m
m
CLK (CLK0,CLK1,CLK2,CLK3)
m
n
n
CE (CE0,CE1,CE2,CE3)
Input Data
Register A
n
n
Input Data
Register B
Multiplier
x
m+n
(default)
Pipeline
Register
m
RST(RST0,RST1,RST2,RST3)
Add/Sub0
n
Multiplicand A1
Multiplier B1
m
m
m+n
(default)
m
n
Input Data
Register A
n
n
Input Data
Register B
Multiplicand A2
n
Multiplier
m+n+1
x
SUM
Pipeline
Register
m
m
m+n+2
Multiplier B2
m
n
n
Input Data
Register A
n
n
Input Data
Register B
Multiplier
x
m+n+2
m+n
(default)
m+n+1
Pipeline
Register
m
Output
Add/Sub1
n
Multiplicand A3
Multiplier B3
m
Output
Register
Multiplier B0
m
n
Input Data
Register A
n
Input Data
Register B
Signed A
Signed B
Addn0
Addn1
Shift Register B Out
m+n
(default)
m
n
m
n
Multiplier
x
Pipeline
Register
m
Input
Register
Pipeline
Register
To Add/Sub0, Add/Sub1
Input
Register
Pipeline
Register
To Add/Sub0, Add/Sub1
Input
Register
Pipeline
Register
To Add/Sub0
Input
Register
Pipeline
Register
To Add/Sub1
Shift Register A Out
Clock, Clock Enable and Reset Resources
Global Clock, Clock Enable and Reset signals from routing are available to every DSP block. Four Clock, Reset
and Clock Enable signals are selected for the sysDSP block. From four clock sources (CLK0, CLK1, CLK2, CLK3)
2-26
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
one clock is selected for each input register, pipeline register and output register. Similarly Clock enable (CE) and
Reset (RST) are selected from their four respective sources (CE0, CE1, CE2, CE3 and RST0, RST1, RST2, RST3)
at each input register, pipeline register and output register.
Signed and Unsigned with Different Widths
The DSP block supports different widths of signed and unsigned multipliers besides x9, x18 and x36 widths. For
unsigned operands, unused upper data bits should be filled to create a valid x9, x18 or x36 operand. For signed
two’s complement operands, sign extension of the most significant bit should be performed until x9, x18 or x36
width is reached. Table 2-8 provides an example of this.
Table 2-8. Sign Extension Example
Number
Unsigned
Unsigned
9-bit
Unsigned
18-bit
Signed
Two’s Complement
Signed 9 Bits
Two’s Complement
Signed 18 Bits
+5
0101
000000101
000000000000000101
0101
000000101
000000000000000101
-6
N/A
N/A
N/A
1010
111111010
111111111111111010
OVERFLOW Flag from MAC
The sysDSP block provides an overflow output to indicate that the accumulator has overflowed. When two
unsigned numbers are added and the result is a smaller number than the accumulator, “roll-over” is said to have
occurred and an overflow signal is indicated. When two positive numbers are added with a negative sum and when
two negative numbers are added with a positive sum, then the accumulator “roll-over” is said to have occurred and
an overflow signal is indicated. Note that when overflow occurs the overflow flag is present for only one cycle. By
counting these overflow pulses in FPGA logic, larger accumulators can be constructed. The conditions overflow
signals for signed and unsigned operands are listed in Figure 2-27.
Figure 2-27. Accumulator Overflow/Underflow
0101111100
0101111101
0101111110
0101111111
1010000000
1010000001
1010000010
252
253
254
255
256
257
258
000000011
000000010
000000001
000000000
3
2
1
0
111111111
111111110
111111101
511
510
509
Unsigned Operation
0101111100
000000011
000000010
000000001
000000000
111111111
111111110
111111101
252
Overflow signal is generated 0101111101 253
0101111110 254
for one cycle when this
0101111111 255
boundary is crossed
1010000000 -256
1010000001 -255
1010000010 -254
Signed Operation
2-27
+3
+2
+1
0
-1
-2
-3
Carry signal is generated for
one cycle when this
boundary is crossed
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
IPexpress™
The user can access the sysDSP block via the ispLEVER IPexpress tool, which provides the option to configure
each DSP module (or group of modules) or by direct HDL instantiation. In addition, Lattice has partnered with The
MathWorks® to support instantiation in the Simulink® tool, a graphical simulation environment. Simulink works with
ispLEVER to dramatically shorten the DSP design cycle in Lattice FPGAs.
Optimized DSP Functions
Lattice provides a library of optimized DSP IP functions. Some of the IP cores planned for the LatticeECP2/M DSP
include the Bit Correlator, Fast Fourier Transform, Finite Impulse Response (FIR) Filter, Reed-Solomon Encoder/
Decoder, Turbo Encoder/Decoder and Convolutional Encoder/Decoder. Please contact Lattice to obtain the latest
list of available DSP IP cores.
Resources Available in the LatticeECP2/M Family
Table 2-9 shows the maximum number of multipliers for each member of the LatticeECP2/M family. Table 2-10
shows the maximum available EBR RAM Blocks in each LatticeECP2/M device. EBR blocks, together with Distributed RAM can be used to store variables locally for fast DSP operations.
Table 2-9. Maximum Number of DSP Blocks in the LatticeECP2/M Family
Device
DSP Block
9x9 Multiplier
18x18 Multiplier
36x36 Multiplier
ECP2-6
3
24
12
3
ECP2-12
6
48
24
6
ECP2-20
7
56
28
7
ECP2-35
8
64
32
8
ECP2-50
18
144
72
18
ECP2-70
22
176
88
22
ECP2M20
6
48
24
6
ECP2M35
8
64
32
8
ECP2M50
22
176
88
22
ECP2M70
24
192
96
24
ECP2M100
42
336
168
42
Table 2-10. Embedded SRAM in the LatticeECP2/M Family
Device
EBR SRAM Block
Total EBR SRAM
(Kbits)
ECP2-6
3
55
ECP2-12
12
221
ECP2-20
15
277
ECP2-35
18
332
ECP2-50
21
387
ECP2-70
60
1106
ECP2M20
66
1217
ECP2M35
114
2101
ECP2M50
225
4147
ECP2M70
246
4534
ECP2M100
288
5308
2-28
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M DSP Performance
Table 2-11 lists the maximum performance in millions of MAC operations per second (MMAC) for each member of
the LatticeECP2/M family.
Table 2-11. DSP Performance
Device
DSP Block
DSP Performance
GMAC
ECP2-6
3
3.9
ECP2-12
6
7.8
ECP2-20
7
9.1
ECP2-35
8
10.4
ECP2-50
18
23.4
ECP2-70
22
28.6
ECP2M20
6
7.8
ECP2M35
8
10.4
ECP2M50
22
28.6
ECP2M70
24
31.2
ECP2M100
42
54.6
For further information about the sysDSP block, please see the list of additional technical information at the end of
this data sheet.
Programmable I/O Cells (PIC)
Each PIC contains two PIOs connected to their respective sysI/O buffers as shown in Figure 2-28. The PIO Block
supplies the output data (DO) and the tri-state control signal (TO) to the sysI/O buffer and receives input from the
buffer. Table 2-12 provides the PIO signal list.
2-29
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-28. PIC Diagram
PIOA
TD
OPOS1
ONEG1
IOLT0
Tristate
Register
Block
OPOS0
OPOS2*
ONEG0
ONEG2*
PADA
“T”
IOLD0
Output
Register
Block
sysIO
Buffer
QNEG0*
QNEG1*
QPOS0*
QPOS1*
INCK**
INDD
INFF
IPOS0
IPOS1
CLK
CE
LSR
GSRN
ECLK1
ECLK2
DDRCLKPOL*
DQSXFER*
Control
Muxes
CLK1
CEO
LSR
GSR
CLK0
CEI
Input
Register
Block
DI
PADB
“C”
PIOB
*Signals are available on left/right/bottom edges only.
** Selected blocks.
Two adjacent PIOs can be joined to provide a differential I/O pair (labeled as “T” and “C”) as shown in Figure 2-28.
The PAD Labels “T” and “C” distinguish the two PIOs. Approximately 50% of the PIO pairs on the left and right
edges of the device can be configured as true LVDS outputs. All I/O pairs can operate as inputs.
2-30
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Table 2-12. PIO Signals List
Name
Type
Description
CE0, CE1
Control from the core
Clock enables for input and output block flip-flops
CLK0, CLK1
Control from the core
System clocks for input and output blocks
ECLK1, ECLK2
Control from the core
Fast edge clocks
LSR
Control from the core
Local Set/Reset
GSRN
Control from routing
Global Set/Reset (active low)
INCK2
Input to the core
Input to Primary Clock Network or PLL reference inputs
DQS
Input to PIO
DQS signal from logic (routing) to PIO
INDD
Input to the core
Unregistered data input to core
INFF
Input to the core
Registered input on positive edge of the clock (CLK0)
IPOS0, IPOS1
Input to the core
Double data rate registered inputs to the core
1
1
QPOS0 , QPOS1
Input to the core
Gearbox pipelined inputs to the core
QNEG01, QNEG11
Input to the core
Gearbox pipelined inputs to the core
OPOS0, ONEG0,
OPOS2, ONEG2
Output data from the core
Output signals from the core for SDR and DDR operation
OPOS1 ONEG1
Tristate control from the core
Signals to Tristate Register block for DDR operation
DEL[3:0]
Control from the core
Dynamic input delay control bits
TD
Tristate control from the core
Tristate signal from the core used in SDR operation
DDRCLKPOL
Control from clock polarity bus Controls the polarity of the clock (CLK0) that feed the DDR input block
DQSXFER
Control from core
Controls signal to the Output block
1. Signals available on left/right/bottom only.
2. Selected I/O.
PIO
The PIO contains four blocks: an input register block, output register block, tristate register block and a control logic
block. These blocks contain registers for operating in a variety of modes along with the necessary clock and selection logic.
Input Register Block
The input register blocks for PIOs in left, right and bottom edges contain delay elements and registers that can be
used to condition high-speed interface signals, such as DDR memory interfaces and source synchronous interfaces, before they are passed to the device core. Figure 2-29 shows the diagram of the input register block for left,
right and bottom edges. The input register block for the top edge contains one memory element to register the input
signal as shown in Figure 2-30. The following description applies to the input register block for PIOs in the left, right
and bottom edges of the device.
Input signals are fed from the sysI/O buffer to the input register block (as signal DI). If desired, the input signal can
bypass the register and delay elements and be used directly as a combinatorial signal (INDD), a clock (INCK) and,
in selected blocks, the input to the DQS delay block. If an input delay is desired, designers can select either a fixed
delay or a dynamic delay DEL[3:0]. The delay, if selected, reduces input register hold time requirements when
using a global clock.
The input block allows three modes of operation. In the single data rate (SDR) the data is registered, by one of the
registers in the single data rate sync register block, with the system clock. In DDR Mode, two registers are used to
sample the data on the positive and negative edges of the DQS signal, creating two data streams, D0 and D1.
These two data streams are synchronized with the system clock before entering the core. Further discussion on
this topic is in the DDR Memory section of this data sheet.
2-31
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
By combining input blocks of the complementary PIOs and sharing some registers from output blocks, a gearbox
function can be implemented, which takes a double data rate signal applied to PIOA and converts it as four data
streams, IPOS0A, IPOS1A, IPOS0B and IPOS1B. Figure 2-29 shows the diagram using this gearbox function. For
more information about this topic, please see information regarding additional documentation at the end of this
data sheet.
The signal DDRCLKPOL controls the polarity of the clock used in the synchronization registers. It ensures adequate timing when data is transferred from the DQS to the system clock domain. For further information about this
topic, see the DDR Memory section of this data sheet.
Figure 2-29. Input Register Block for Left, Right and Bottom Edges
INCK**
To DQS Delay Block**
DI
(From sysIO
Buffer)
INDD
SDR & Sync
Registers
DDR Registers
Fixed Delay
0
Dynamic Delay
1
0
D
DEL [3:0]
D0
IPOS0A
Q
D-Type
/LATCH
1
Q
D
Clock Transfer Registers
D
Q
QPOS0A
D-Type*
D-Type
From
Routing
IPOS1A
D
Delayed
DQS
0
Q
D1
D
D-Type
D2
Q
D
Q
D-Type
/LATCH
D-Type
D
Q
QPOS1A
D-Type*
To
Routing
1
CLK0 (of PIO A)
DDRCLKPOL
CLKA
True PIO (A) in LVDS I/O Pair
Comp PIO (B) in LVDS I/O Pair
DI
(From sysIO
Buffer)
Fixed Delay
Dynamic Delay
0
SDR & Sync
Registers
DDR Registers
0
D0
1
D
DEL [3:0]
0
1
Q
1
D-Type
From
Routing
Delayed
DQS
INCK**
To DQS Delay Block**
INDD
DDRSRC
D
Q
D-Type
/LATCH
Clock Transfer Registers
D
Q
IPOS0B
QPOS0B
D-Type*
IPOS1B
D
0
Q
D-Type
D1
0
D
Q
D2
D-Type
1
D
Q
D-Type
/LATCH
D
Q
QPOS1B
D-Type*
1
To
Routing
CLK0 (of PIO B)
Gearbox Configuration Bit
DDRCLKPOL
CLKB
Note: Simplified version does not
show CE and SET/RESET details
*Shared with output register
**Selected PIO.
2-32
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-30. Input Register Block Top Edge
INDD
Fixed Delay
Dynamic Delay
D
Q
D-Type
/LATCH
DEL[3:0]
To Routing
INCK*
DI
(from sysIO
buffer)
IPOS0
CLK0
(from
routing)
Note: Simplified version does not show CE and SET/RESET details.
*On selected blocks.
Output Register Block
The output register block provides the ability to register signals from the core of the device before they are passed
to the sysI/O buffers. The blocks on the PIOs on the left, right and bottom contain a register for SDR operation that
is combined with an additional latch for DDR operation. Figure 2-31 shows the diagram of the Output Register
Block for PIOs on the left, right and the bottom edges. Figure 2-32 shows the diagram of the Output Register Block
for PIOs on the top edge of the device.
In SDR mode, ONEG0 feeds one of the flip-flops that then feeds the output. The flip-flop can be configured as a Dtype or latch. In DDR mode, ONEG0 and OPOS0 are fed into registers on the positive edge of the clock. Then at
the next clock cycle this registered OPOS0 is latched. A multiplexer running off the same clock selects the correct
register for feeding to the output (D0).
By combining the output blocks of the complementary PIOs and sharing some registers from input blocks, a gearbox function can be implemented, that takes four data streams: ONEG0A, ONEG1A, ONEG1B and ONEG1B.
Figure 2-32 shows the diagram using this gearbox function. For more information about this topic, please see information regarding additional documentation at the end of this data sheet.
2-33
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-31. Output and Tristate Block for Left, Right and Bottom Edges
TD
Tristate Logic
D
Q
D-Type
/LATCH
ONEG1
0
1
0
0
D
OPOS1
Q
D
1
Q
Latch
From Routing
To sysIO Buffer
D-Type
TO
1
0
ONEG0
D
Q
0
D-Type*
1
1
D
Q
D-Type
/LATCH
DDR Output
Registers
DO
0
OPOS0
0
Q
D
D-Type*
CLKA
Q
D
Latch
0
D
0
1
1
Q
D
D-Type
1
1
Q
Latch
Clock Transfer
Registers
ECLK1
ECLK2
CLK1
(CLKA)
DQSXFER
Programmable
Control
0
1
0
1
Output Logic
True PIO (A) in LVDS I/O Pair
Comp PIO (B) in LVDS I/O Pair
TD
Tristate Logic
Q
D
D-Type
/LATCH
ONEG1
0
1
0
0
D
OPOS1
Q
D-Type
1
Q
D
TO
1
Latch
From Routing
To sysIO Buffer
ONEG0
D
Q
D
D-Type
/LATCH
Q
D-Type*
DDR Output
Registers
DO
0
OPOS0
0
D
Q
D-Type*
CLKB
ECLK1
ECLK2
CLK1
(CLKB)
DQSXFER
D
D
Q
Latch
Q
D-Type
D
Q
1
1
Latch
Clock Transfer
Registers
0
1
0
1
* Shared with input register
Programmable
Control
Output Logic
Note: Simplified version does not show CE and SET/RESET details
2-34
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-32. Output and Tristate Block, Top Edge
TD
0
1
0
Q
D
D-Type
/LATCH
From Routing
To sysIO Buffer
ONEG1
TO
1
Tristate Logic
ONEG0
DO
0
ECLK1
ECLK2
CLK1
(CLKA)
0
Q
D
D-Type
/LATCH
1
Output Logic
1
Note: Simplified version does not show CE and SET/RESET details.
Tristate Register Block
The tristate register block provides the ability to register tri-state control signals from the core of the device before
they are passed to the sysI/O buffers. The block contains a register for SDR operation and an additional latch for
DDR operation. Figure 2-31 shows the diagram of the Tristate Register Block with the Output Block for the left, right
and bottom edges and Figure 2-32 shows the diagram of the Tristate Register Block with the Output Block for the
top edge.
In SDR mode, ONEG1 feeds one of the flip-flops that then feeds the output. The flip-flop can be configured a Dtype or latch. In DDR mode, ONEG1 and OPOS1 are fed into registers on the positive edge of the clock. Then in
the next clock the registered OPOS1 is latched. A multiplexer running off the same clock cycle selects the correct
register for feeding to the output (D0).
Control Logic Block
The control logic block allows the selection and modification of control signals for use in the PIO block. A clock is
selected from one of the clock signals provided from the general purpose routing, one of the edge clocks (ECLK1/
ECLK2) and a DQS signal provided from the programmable DQS pin and provided to the input register block. The
clock can optionally be inverted.
DDR Memory Support
Certain PICs have additional circuitry to allow the implementation of high speed source synchronous and DDR
memory interfaces. The support varies by the edge of the device as detailed below.
Left and Right Edges
PICs on these edges have registered elements that support DDR memory interfaces. One of every 16 PIOs contains a delay element to facilitate the generation of DQS signals. The DQS signal feeds the DQS bus that spans the
set of 16 PIOs. Figure 2-33 shows the assignment of DQS pins in each set of 16 PIOs.
Bottom Edge
PICs on the bottom edge have registered elements that support DDR memory interfaces. One of every 18 PIOs
contains a delay element to facilitate the generation of DQS signals. The DQS signal feeds the DQS bus that spans
the set of 18 PIOs. Figure 2-34 shows the assignment of DQS pins in each set of 18 PIOs.
2-35
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Top Edge
The PICs on the top edge are different from PIOs on the left, right and bottom edges. PIOs on this edge do not
have DDR registers or DQS signals.
The exact DQS pins are shown in a dual function in the Logic Signal Connections table in this data sheet. Additional detail is provided in the Signal Descriptions table. The DQS signal from the bus is used to strobe the DDR
data from the memory into input register blocks. Interfaces on the left and right edges are designed for DDR memories that support 16 bits of data, whereas interfaces on the bottom are designed for memories that support 18 bits
of data.
Figure 2-33. DQS Input Routing for the Left and Right Edges of the Device
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
LVDS Pair
LVDS Pair
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
LVDS Pair
LVDS Pair
PIO A
DQS
sysIO
Buffer
Delay
PIO B
Assigned
DQS Pin
PADA "T"
LVDS Pair
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
LVDS Pair
LVDS Pair
LVDS Pair
2-36
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-34. DQS Input Routing for the Bottom Edge of the Device
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
LVDS Pair
LVDS Pair
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
LVDS Pair
LVDS Pair
PIO A
DQS
sysIO
Buffer
Delay
PIO B
Assigned
DQS Pin
PADA "T"
LVDS Pair
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
PIO A
PADA "T"
PIO B
PADB "C"
LVDS Pair
LVDS Pair
LVDS Pair
PIO A
PIO B
PADA "T"
LVDS Pair
PADB "C"
DLL Calibrated DQS Delay Block
Source synchronous interfaces generally require the input clock to be adjusted in order to correctly capture data at
the input register. For most interfaces a PLL is used for this adjustment. However, in DDR memories the clock
(referred to as DQS) is not free-running so this approach cannot be used. The DQS Delay block provides the
required clock alignment for DDR memory interfaces.
The DQS signal (selected PIOs only, as shown in Figure 2-35) feeds from the PAD through a DQS delay element to
a dedicated DQS routing resource. The DQS signal also feeds polarity control logic, which controls the polarity of
the clock to the sync registers in the input register blocks. Figure 2-35 and Figure 2-36 show how the DQS transition signals are routed to the PIOs.
The temperature, voltage and process variations of the DQS delay block are compensated by a set of calibration
(6-bit bus) signals from two dedicated DLLs (DDR_DLL) on opposite sides of the device. Each DLL compensates
DQS delays in its half of the device as shown in Figure 2-35. The DLL loop is compensated for temperature, voltage and process variations by the system clock and feedback loop.
2-37
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-35. Edge Clock, DLL Calibration and DQS Local Bus Distribution
I/O Bank 0
I/O Bank 1
Spans 16 PIOs
ECLK1
DQS Input
I/O
I/O
B
a
n
k
7
B
a
n
k
2
Delayed
DQS
DDR_DLL
(Right)
DDR_DLL
(Left)
ECLK2
Polarity Control
I/O
I/O
B
a
n
k
6
B
a
n
k
3
Spans 18 PIOs
I/O Bank 4
I/O Bank 5
Note: Bank 8 is not shown.
2-38
DQSXFER
DQS Delay
Control Bus
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
DQS
Polarity control
DCNTL[6:0]
DQSXFER
CLK1
ECLK2
ECLK1
Figure 2-36. DQS Local Bus
PIO
Output
Register Block
DQSXFER
Input
Register Block
GSR
CEI
DQS
DDR
Datain
PAD
sysIO
Buffer
DI
To Sync
Reg.
CLK1
DQS
To DDR
Reg.
DQS
Strobe
PAD
sysIO
Buffer
PIO
Polarity Control
Logic
DI
DQS
DQSDEL
Calibration bus
from DLL
DCNTL[6:0]
ECLK1
DQSXFER
DQSXFERDEL*
DCNTL[6:0]
*DQSXFERDEL shifts ECLK1 by 90% and is not associated with a particular PIO.
Polarity Control Logic
In a typical DDR Memory interface design, the phase relationship between the incoming delayed DQS strobe and
the internal system clock (during the READ cycle) is unknown.
The LatticeECP2/M family contains dedicated circuits to transfer data between these domains. To prevent set-up
and hold violations, at the domain transfer between DQS (delayed) and the system clock, a clock polarity selector
is used. This changes the edge on which the data is registered in the synchronizing registers in the input register
block. This requires evaluation at the start of each READ cycle for the correct clock polarity.
Prior to the READ operation in DDR memories, DQS is in tristate (pulled by termination). The DDR memory device
drives DQS low at the start of the preamble state. A dedicated circuit detects the first DQS rising edge after the preamble state. This signal is used to control the polarity of the clock to the synchronizing registers.
2-39
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
DQSXFER
LatticeECP2/M devices provide a DQSXFER signal to the output buffer to assist it in data transfer to DDR memories that require DQS strobe be shifted 90o. This shifted DQS strobe is generated by the DQSDEL block. The
DQSXFER signal runs the span of the data bus.
sysI/O Buffer
Each I/O is associated with a flexible buffer referred to as a sysI/O buffer. These buffers are arranged around the
periphery of the device in groups referred to as banks. The sysI/O buffers allow users to implement the wide variety
of standards that are found in today’s systems including LVCMOS, SSTL, HSTL, LVDS and LVPECL.
sysI/O Buffer Banks
LatticeECP2/M devices have nine sysI/O buffer banks: eight banks for user I/Os arranged two per side. The ninth
sysI/O buffer bank (Bank 8) is located adjacent to Bank 3 and has dedicated/shared I/Os for configuration. When a
shared pin is not used for configuration it is available as a user I/O. Each bank is capable of supporting multiple I/O
standards. Each sysI/O bank has its own I/O supply voltage (VCCIO). In addition, each bank, except Bank 8, has
voltage references, VREF1 and VREF2, which allow it to be completely independent from the others. Bank 8 shares
two voltage references, VREF1 and VREF2, with Bank 3. Figure 2-37 shows the nine banks and their associated supplies.
In LatticeECP2/M devices, single-ended output buffers and ratioed input buffers (LVTTL, LVCMOS and PCI) are
powered using VCCIO. LVTTL, LVCMOS33, LVCMOS25 and LVCMOS12 can also be set as fixed threshold inputs
independent of VCCIO.
Each bank can support up to two separate VREF voltages, VREF1 and VREF2, that set the threshold for the referenced input buffers. Some dedicated I/O pins in a bank can be configured to be a reference voltage supply pin.
Each I/O is individually configurable based on the bank’s supply and reference voltages.
2-40
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-37. LatticeECP2 Banks
TOP
GND
VREF2(1)
V
REF1(1)
VCCIO1
GND
VREF2(0)
VREF1(0)
VCCIO0
Bank 0
Bank 1
V CCIO2
V REF1(2)
V REF2(2)
GND
GND
GND
BOTTOM
2-41
VREF2(4)
GND
VCCIO4
VREF1(4)
Bank 4
VCCIO5
VREF1(5)
VREF2(5)
Bank 5
V CCIO8
GND
V REF2(6)
Bank 6
V REF1(6)
Bank 8
V CCIO6
V REF1(3)
V REF2(3)
GND
GND
RIGHT
V CCIO3
Bank 3
LEFT
V REF2(7)
Bank 7
V REF1(7)
Bank 2
V
CCIO7
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 2-38. LatticeECP2M Banks
TOP
GND
VREF2(1)
V
REF1(1)
VCCIO1
GND
VREF2(0)
VREF1(0)
VCCIO0
SERDES
Quad
SERDES
Quad
Bank 0
Bank 7
V REF2(7)
Bank 2
V
CCIO7
V REF1(7)
Bank 1
VCCIO2
VREF1(2)
V REF2(2)
GND
LEFT
Bank 3
V CCIO6
Bank 8
V REF2(6)
V REF2(3)
GND
Bank 6
V REF1(6)
VCCIO3
V REF1(3)
RIGHT
GND
GND
Bank 5
Bank 4
GND
VREF2(4)
GND
VCCIO4
VREF1(4)
VREF2(5)
GND
SERDES
Quad
VCCIO5
VREF1(5)
SERDES
Quad
VCCIO8
BOTTOM
LatticeECP2/M devices contain two types of sysI/O buffer pairs.
1. Top (Bank 0 and Bank 1) sysI/O Buffer Pairs (Single-Ended Outputs Only)
The sysI/O buffer pairs in the top banks of the device consist of two single-ended output drivers and two sets of
single-ended input buffers (both ratioed and referenced). One of the referenced input buffers can also be configured as a differential input.
The two pads in the pair are described as “true” and “comp”, where the true pad is associated with the positive
side of the differential input buffer and the comp (complementary) pad is associated with the negative side of
the differential input buffer.
2. Bottom (Bank 4 and Bank 5) sysI/O Buffer Pairs (Single-Ended Outputs Only)
The sysI/O buffer pairs in the bottom banks of the device consist of two single-ended output drivers and two
2-42
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
sets of single-ended input buffers (both ratioed and referenced). One of the referenced input buffers can also
be configured as a differential input.
The two pads in the pair are described as “true” and “comp”, where the true pad is associated with the positive
side of the differential input buffer and the comp (complementary) pad is associated with the negative side of
the differential input buffer.
3. Left and Right (Banks 2, 3, 6 and 7) sysI/O Buffer Pairs (50% Differential and 100% Single-Ended Outputs)
The sysI/O buffer pairs in the left and right banks of the device consist of two single-ended output drivers, two
sets of single-ended input buffers (both ratioed and referenced) and one differential output driver. One of the referenced input buffers can also be configured as a differential input. In these banks the two pads in the pair are
described as “true” and “comp”, where the true pad is associated with the positive side of the differential I/O, and
the comp (complementary) pad is associated with the negative side of the differential I/O.
LVDS differential output drivers are available on 50% of the buffer pairs on the left and right banks.
4. Bank 8 sysI/O Buffer Pairs (Single-Ended Outputs, Only on Shared Pins When Not Used by Configuration)
The sysI/O buffers in Bank 8 consist of single-ended output drivers and single-ended input buffers (both ratioed
and referenced). The referenced input buffer can also be configured as a differential input.
The two pads in the pair are described as “true” and “comp”, where the true pad is associated with the positive
side of the differential input buffer and the comp (complementary) pad is associated with the negative side of the
differential input buffer.
In LatticeECP2 devices, only the I/Os on the bottom banks have programmable PCI clamps. In LatticeECP2M
devices, the I/Os on the left and bottom banks have programmable PCI clamps.
Typical sysI/O I/O Behavior During Power-up
The internal power-on-reset (POR) signal is deactivated when VCC, VCCIO8 and VCCAUX have reached satisfactory
levels. After the POR signal is deactivated, the FPGA core logic becomes active. It is the user’s responsibility to
ensure that all other VCCIO banks are active with valid input logic levels to properly control the output logic states of
all the I/O banks that are critical to the application. For more information about controlling the output logic state with
valid input logic levels during power-up in LatticeECP2/M devices, see the list of additional technical documentation
at the end of this data sheet.
The VCC and VCCAUX supply the power to the FPGA core fabric, whereas the VCCIO supplies power to the I/O buffers. In order to simplify system design while providing consistent and predictable I/O behavior, it is recommended
that the I/O buffers be powered-up prior to the FPGA core fabric. VCCIO supplies should be powered-up before or
together with the VCC and VCCAUX supplies.
Supported sysI/O Standards
The LatticeECP2/M sysI/O buffer supports both single-ended and differential standards. Single-ended standards
can be further subdivided into LVCMOS, LVTTL and other standards. The buffers support the LVTTL, LVCMOS
1.2V, 1.5V, 1.8V, 2.5V and 3.3V standards. In the LVCMOS and LVTTL modes, the buffer has individual configuration options for drive strength, bus maintenance (weak pull-up, weak pull-down, or a bus-keeper latch) and open
drain. Other single-ended standards supported include SSTL and HSTL. Differential standards supported include
LVDS, MLVDS, BLVDS, LVPECL, RSDS, differential SSTL and differential HSTL. Tables 2-13 and 2-14 show the I/
O standards (together with their supply and reference voltages) supported by LatticeECP2/M devices. For further
information about utilizing the sysI/O buffer to support a variety of standards please see the the list of additional
technical information at the end of this data sheet.
2-43
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Table 2-13. Supported Input Standards
VREF (Nom.)
VCCIO1 (Nom.)
LVTTL
—
—
LVCMOS33
—
—
LVCMOS25
—
—
LVCMOS18
—
1.8
LVCMOS15
—
1.5
Input Standard
Single Ended Interfaces
LVCMOS12
—
—
PCI 33
—
3.3
HSTL18 Class I, II
0.9
—
HSTL15 Class I
0.75
—
SSTL3 Class I, II
1.5
—
SSTL2 Class I, II
1.25
—
SSTL18 Class I, II
0.9
—
Differential SSTL18 Class I, II
—
—
Differential SSTL2 Class I, II
—
—
Differential Interfaces
Differential SSTL3 Class I, II
—
—
Differential HSTL15 Class I
—
—
Differential HSTL18 Class I, II
—
—
LVDS, MLVDS, LVPECL, BLVDS, RSDS
—
—
1 When not specified, VCCIO can be set anywhere in the valid operating range (page 3-1).
2-44
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Table 2-14. Supported Output Standards
Output Standard
Drive
VCCIO (Nom.)
4mA, 8mA, 12mA, 16mA, 20mA
3.3
LVCMOS33
4mA, 8mA, 12mA 16mA, 20mA
3.3
LVCMOS25
4mA, 8mA, 12mA, 16mA, 20mA
2.5
LVCMOS18
4mA, 8mA, 12mA, 16mA
1.8
LVCMOS15
4mA, 8mA
1.5
Single-ended Interfaces
LVTTL
LVCMOS12
2mA, 6mA
1.2
LVCMOS33, Open Drain
4mA, 8mA, 12mA 16mA, 20mA
—
LVCMOS25, Open Drain
4mA, 8mA, 12mA 16mA, 20mA
—
LVCMOS18, Open Drain
4mA, 8mA, 12mA 16mA
—
LVCMOS15, Open Drain
4mA, 8mA
—
LVCMOS12, Open Drain
2mA, 6mA
—
PCI33
N/A
3.3
HSTL18 Class I, II
N/A
1.8
HSTL15 Class I
N/A
1.5
SSTL3 Class I, II
N/A
3.3
SSTL2 Class I, II
N/A
2.5
SSTL18 Class I, II
N/A
1.8
N/A
3.3
Differential Interfaces
Differential SSTL3, Class I, II
Differential SSTL2, Class I, II
N/A
2.5
Differential SSTL18, Class I, II
N/A
1.8
Differential HSTL18, Class I, II
N/A
1.8
Differential HSTL15, Class I
N/A
1.5
LVDS
N/A
2.5
MLVDS1
N/A
2.5
BLVDS1
N/A
2.5
LVPECL1
N/A
3.3
N/A
2.5
4mA, 8mA, 12mA, 16mA, 20mA
3.3
1
RSDS
LVCMOS33D1
1. Emulated with external resistors. For more detail, please see information regarding additional technical documentation at
the end of this data sheet.
Hot Socketing
LatticeECP2/M devices have been carefully designed to ensure predictable behavior during power-up and powerdown. During power-up and power-down sequences, the I/Os remain in tri-state until the power supply voltage is
high enough to ensure reliable operation. In addition, leakage into I/O pins is controlled within specified limits. This
allows for easy integration with the rest of the system. These capabilities make the LatticeECP2/M ideal for many
multiple power supply and hot-swap applications.
2-45
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
SERDES and PCS (Physical Coding Sublayer)
LatticeECP2M devices feature up to 16 channels of embedded SERDES arranged in quads at the corners of the
devices. Figure 2-39 shows the position of the quad blocks in relation to the PFU array for LatticeECP2M70 and
LatticeECP2M100 devices. Table 2-15 shows the location of Quads for all the devices.
Each quad contains four dedicated SERDES (Ch0 to Ch3) for high-speed, full-duplex serial data transfer. Each
quad also has a PCS block that interfaces to the SERDES channels and contains digital logic to support an array of
popular data protocols. PCS also contains logic to the interface to FPGA core.
Figure 2-39. SERDES Quads (LatticeECP2M70/LatticeECP2M100)
ULC SERDES Quad
Ch 3
Ch 3
Ch 2
Ch 1
URC SERDES Quad
Ch 0
Ch 3
Ch 2
Ch 1
PCS Digital Logic
PCS Digital Logic
PCS Digital Logic
PCS Digital Logic
Ch 2
Ch 1 Ch 0
Ch 3
LLC SERDES Quad
Ch 2
Ch 0
Ch 1 Ch 0
LRC SERDES Quad
Table 2-15. Available SERDES Quads per LatticeECP2M Devices
Device
URC Quad
ULC Quad
LRC Quad
LLC Quad
ECP2M20
Available
—
—
—
ECP2M35
Available
—
—
—
ECP2M50
Available
—
Available
—
ECP2M70
Available
Available
Available
Available
ECP2M100
Available
Available
Available
Available
SERDES Block
A differential receiver receives the serial encoded data stream, equalizes the signal, extracts the buried clock and
de-serializes the data-stream before passing the 8- or 10-bit data to the PCS logic. The transmit channel receives
the parallel (8- or 10-bit) encoded data, serializes the data and transmits the serial bit stream through the differential buffers. There is a single transmit clock per quad. Figure 2-40 shows a single channel SERDES and its interface to the PCS logic. Each SERDES receiver channel provides a recovered clock to the PCS block and to the
FPGA core logic.
2-46
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Each Transmit and Receive channel has its independent power supplies. The Output and Input buffers of each
channel also have their own independent power supplies. In addition, there are separate power supplies for PLL,
terminating resistor per quad.
Figure 2-40. Simplified Channel Block Diagram for SERDES and PCS
SERDES (Analog)
PCS (Digital)
RX REFCLK
Recovered Clock
Receiver
Elastic Buffer
Read Clock
Equalizer
Deserializer
1:8/1:10
Polarity
Adjust
Byte Boundary
Detect, 8b/10b
Decoder
Down
Sample
FIFO
CTC
FIFO
16/20 bits
Receive Data
TX REFCLK
FPGA Receive Clock
To FPGA Core
TX PLL
Serializer
8:1/10:1
FPGA Transmit Clock
Polarity
Adjust
8b/10b
Encoder
Transmit
Up
Sample
FIFO
8/10 bits or
16/20 bits
Transmit Data
From Transmit PLL
(In Common Block)
PCS
As shown in Figure 2-40, the PCS receives the parallel digital data from the deserializer receivers and adjusts the
polarity, detects, byte boundary, decodes (8b/10b) and provides Clock Tolerance Compensation (CTC) FIFO for
changing the clock domain from receiver clock to the FPGA Clock.
For the transmit channel, the PCS block receives the parallel data from the FPGA core, encodes it with 8b/10b,
adjusts the polarity and passes the 8/10 bit data to the transmit SERDES channel.
The PCS also provides bypass modes that allow a direct 8-bit or 10-bit interface from the SERDES to the FPGA
logic. The PCS interface to FPGA can also be programmed to run at 1/2 speed for a 16-bit or 20-bit interface to the
FPGA logic.
SCI (SERDES Client Interface) Bus
The SERDES Client Interface (SCI) is a soft IP interface that allow the SERDES/PCS Quad block to be controlled
by registers as opposed to the configuration memory cells. It is a simple register configuration interface.
The ispLEVER design tools from Lattice support all modes of the PCS. Most modes are dedicated to applications
associated with a specific industry standard data protocol. Other more general purpose modes allow users to
define their own operation. With ispLEVER, the user can define the mode for each quad in a design.
Popular standards such as 10Gb Ethernet and x4 PCI-Express and 4x Serial RapidIO can be implemented using
IP (provided by Lattice), a single quad (Four SERDES channels and PCS) and some additional logic from the core.
For further information about SERDES, please see the list of additional technical documentation at the end of this
data sheet.
2-47
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
IEEE 1149.1-Compliant Boundary Scan Testability
All LatticeECP2/M devices have boundary scan cells that are accessed through an IEEE 1149.1 compliant Test
Access Port (TAP). This allows functional testing of the circuit board, on which the device is mounted, through a
serial scan path that can access all critical logic nodes. Internal registers are linked internally, allowing test data to
be shifted in and loaded directly onto test nodes, or test data to be captured and shifted out for verification. The test
access port consists of dedicated I/Os: TDI, TDO, TCK and TMS. The test access port has its own supply voltage
VCCJ and can operate with LVCMOS3.3, 2.5, 1.8, 1.5 and 1.2 standards.
For more details on boundary scan test, please see information regarding additional technical documentation at
the end of this data sheet.
Device Configuration
All LatticeECP2/M devices contain two ports that can be used for device configuration. The Test Access Port (TAP),
which supports bit-wide configuration, and the sysCONFIG port, support both byte-wide and serial configuration,
including the standard SPI Flash interface. The TAP supports both the IEEE Standard 1149.1 Boundary Scan
specification and the IEEE Standard 1532 In- System Configuration specification. The sysCONFIG port is a 20-pin
interface with six I/Os used as dedicated pins with the remainder used as dual-use pins. See Lattice technical note
number TN1108, LatticeECP2 sysCONFIG Usage Guide for more information about using the dual-use pins as
general purpose I/Os.
On power-up, the FPGA SRAM is ready to be configured using the selected sysCONFIG port. Once a configuration
port is selected, it will remain active throughout that configuration cycle. The IEEE 1149.1 port can be activated any
time after power-up by sending the appropriate command through the TAP port.
Enhanced Configuration Option
LatticeECP2/M devices have enhanced configuration features such as: decryption support, TransFR™ I/O and
dual boot image support.
1. Decryption Support
LatticeECP2/M devices provide on-chip, One Time Programmable (OTP) non-volatile key storage to support
decryption of a 128-bit AES encrypted bitstream, securing designs and deterring design piracy.
2. TransFR (Transparent Field Reconfiguration)
TransFR I/O (TFR) is a unique Lattice technology that allows users to update their logic in the field without
interrupting system operation using a single ispVM® command. TransFR I/O allows I/O states to be frozen during device configuration. This allows the device to be field updated with a minimum of system disruption and
downtime. See Lattice technical note number TN1087, Minimizing System Interruption During Configuration
Using TransFR Technology, for details.
3. Dual Boot Image Support
Dual boot images are supported for applications requiring reliable remote updates of configuration data for the
system FPGA. After the system is running with a basic configuration, a new boot image can be downloaded
remotely and stored in a separate location in the configuration storage device. Any time after the update the
LatticeECP2/M can be re-booted from this new configuration file. If there is a problem, such as corrupt data
during download or incorrect version number with this new boot image, the LatticeECP2/M device can revert
back to the original backup configuration and try again. This all can be done without power cycling the system.
For more information about device configuration, please see the list of additional technical documentation at the
end of this data sheet.
Software Error Detect (SED) Support
LatticeECP2/M devices have dedicated logic to perform CRC checks. During configuration, the configuration data
bitstream can be checked with the CRC logic block. In addition, the LatticeECP2 device can also be programmed
2-48
Architecture
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
for checking soft errors (SED) in SRAM. This SED operation can be run in the background during user mode. If a
soft error occurs, during user mode (normal operation) the device can be programmed to either reload from a
known good boot image or generate an error signal.
For further information about Soft Error Detect (SED) support, please see the list of additional technical documentation at the end of this data sheet.
External Resistor
LatticeECP2/M devices require a single external, 10K ohm ±1% value between the XRES pin and ground. Device
configuration will not be completed if this resistor is missing. There is no boundary scan register on the external
resistor pad.
On-Chip Oscillator
Every LatticeECP2/M device has an internal CMOS oscillator which is used to derive a Master Clock for configuration. The oscillator and the Master Clock run continuously and are available to user logic after configuration is completed. The software default value of the Master Clock is 2.5MHz. Table 2-16 lists all the available Master
Configuration Clock frequencies for normal non-encrypted mode and encrypted mode. When a different Master
Clock is selected during the design process, the following sequence takes place:
1. Device powers up with a Master Clock frequency of 3.1MHz.
2. During configuration, users select a different master clock frequency.
3. The Master Clock frequency changes to the selected frequency once the clock configuration bits are received.
4. If the user does not select a master clock frequency, then the configuration bitstream defaults to the Master
Clock frequency of 2.5MHz.
This internal CMOS oscillator is available to the user by routing it as an input clock to the clock tree. For further
information about the use of this oscillator for configuration or user mode, please see the list of additional technical
documentation at the end of this data sheet.
Table 2-16. Selectable Master Clock (CCLK) Frequencies During Configuration
Non-Encrypted Mode CCLK (MHz)
Encrypted Mode CCLK (MHz)
1
2.5
13.0
45.0
2.51
4.3
15.0
55.0
5.4
5.4
20.0
60.0
10.0
6.9
26.0
—
34.0
8.1
30.0
—
41.0
9.2
34.0
—
45.0
10.0
41.0
130.0
—
1. Software default frequency.
Density Shifting
The LatticeECP2/M family is designed to ensure that different density devices in the same family and in the same
package have the same pinout. Furthermore, the architecture ensures a high success rate when performing design
migration from lower density devices to higher density devices. In many cases, it is also possible to shift a lower utilization design targeted for a high-density device to a lower density device. However, the exact details of the final
resource utilization will impact the likelihood of success in each case. Design migration between LatticeECP2 and
LatticeECP2M families is not possible. For specific requirements relating to sysCONFIG pins of the ECP2M50,
M70 and M100, see the Logic Signal Connections tables.
2-49
LatticeECP2/M Family Data Sheet
DC and Switching Characteristics
February 2008
Data Sheet DS1006
Absolute Maximum Ratings1, 2, 3
Supply Voltage VCC . . . . . . . . . . . . . . . . . . . -0.5 to 1.32V
Supply Voltage VCCAUX . . . . . . . . . . . . . . . . -0.5 to 3.75V
Supply Voltage VCCJ . . . . . . . . . . . . . . . . . . -0.5 to 3.75V
Output Supply Voltage VCCIO . . . . . . . . . . . -0.5 to 3.75V
Input or I/O Tristate Voltage Applied4 . . . . . . -0.5 to 3.75V
Storage Temperature (Ambient) . . . . . . . . . -65 to 150°C
Junction Temperature (Tj) . . . . . . . . . . . . . . . . . . +125°C
1. Stress above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
2. Compliance with the Lattice Thermal Management document is required.
3. All voltages referenced to GND.
4. Overshoot and undershoot of -2V to (VIHMAX + 2) volts is permitted for a duration of <20ns.
Recommended Operating Conditions
Symbol
1, 4, 5
Parameter
Min.
Max.
Units
Core Supply Voltage
1.14
1.26
V
VCCAUX1, 3, 4, 5
Auxiliary Supply Voltage
3.135
3.465
V
VCCPLL
PLL Supply Voltage
1.14
1.26
V
VCCIO1, 2, 4
I/O Driver Supply Voltage
1.14
3.465
V
Supply Voltage for IEEE 1149.1 Test Access Port
1.14
3.465
V
0
85
°C
-40
100
°C
VCC
VCCJ
1
tJCOM
Junction Temperature, Commercial Operation
tJIND
Junction Temperature, Industrial Operation
SERDES External Power Supply (For LatticeECP2M Family Only)
VCCIB
Input Buffer Power Supply (1.2V)
1.14
1.26
V
Input Buffer Power Supply (1.5V)
1.425
1.575
V
Output Buffer Power Supply (1.2V)
1.14
1.26
V
Output Buffer Power Supply (1.5V)
1.425
1.575
V
VCCAUX33
Termination Resistor Switching Power Supply
3.135
3.465
V
VCCRX6
Receive Power Supply
1.14
1.26
V
VCCTX6
Transmit Power Supply
1.14
1.26
V
VCCP6
PLL and Reference Clock Buffer Power
1.14
1.26
V
VCCOB
1. If VCCIO or VCCJ is set to 1.2V, they must be connected to the same power supply as VCC. If VCCIO or VCCJ is set to 3.3V, they must be connected to the same power supply as VCCAUX. VCC and VCCPLL must be connected to the same power supply.
2. See recommended voltages by I/O standard in subsequent table.
3. VCCAUX ramp rate must not exceed 30mV/µs during power-up when transitioning between 0V and 3.3V.
4. For proper power-up configuration, users must ensure that the configuration control signals such as the CFGx, INITN, PROGRAMN and
DONE pins are driven to the proper logic levels when the device powers up. The device power-up is triggered by the last of V CC, VCCAUX or
VCCIO8 supplies that reaches its minimum valid levels. Alternatively, if the configuration control signals are pulled up by V CCIO8, the VCCIO8
(configuration I/O bank) voltage must be powered up prior to or at the same time as the last of VCC or VCCAUX reaches its minimum levels.
5. For power-up, VCC must reach its valid minimum value before powering up VCCAUX (LatticeECP2/M “S” version devices only).
6. VCCRX,VCCTX and VCCP must be tied together in each quad and all quads need to be powered up.
© 2008 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
3-1
DS1006 DC and Switching_01.7
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Hot Socketing Specifications1, 2, 3, 4
Symbol
Parameter
IDK
Input or I/O leakage current
IHDIN5
SERDES average input current when
device is powered down and inputs
are driven
Condition
0 ≤ VIN ≤ VIH (MAX.)
Min.
Typ.
Max.
Units
—
—
+/-1000
µA
—
—
4
mA
1. VCC, VCCAUX and VCCIO should rise/fall monotonically. VCC and VCCPLL must be connected to the same power supply (applies to ECP2-6,
ECP2-12 and ECP2-20 only).
2. 0 ≤ VCC ≤ VCC (MAX), 0 ≤ VCCIO ≤ VCCIO (MAX) or 0 ≤ VCCAUX ≤ VCCAUX (MAX).
3. IDK is additive to IPU, IPW or IBH.
4. LVCMOS and LVTTL only.
5. Assumes that the device is powered down with all supplies grounded, both P and N inputs driven by a CML driver with maximum allowed
VCCIB of 1.575V, 8b10b data and internal AC coupling.
3-2
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
DC Electrical Characteristics
Over Recommended Operating Conditions
Symbol
IIL, IIH
1
Parameter
Condition
Min.
Typ.
Max.
Units
Input or I/O Low Leakage
0 ≤ VIN ≤ (VCCIO - 0.2V)
—
—
10
µA
IIH1
Input or I/O High Leakage
(VCCIO - 0.2V) < VIN ≤ 3.6V
—
—
150
µA
IPU
I/O Active Pull-up Current
0 ≤ VIN ≤ 0.7 VCCIO
-30
—
-210
µA
IPD
I/O Active Pull-down Current
VIL (MAX) ≤ VIN ≤ VIH (MAX)
30
—
210
µA
IBHLS
Bus Hold Low Sustaining Current VIN = VIL (MAX)
30
—
—
µA
IBHHS
Bus Hold High Sustaining Current VIN = 0.7 VCCIO
-30
—
—
µA
IBHLO
Bus Hold Low Overdrive Current 0 ≤ VIN ≤ VCCIO
—
—
210
µA
IBHHO
Bus Hold High Overdrive Current 0 ≤ VIN ≤ VCCIO
—
—
-210
µA
VBHT
Bus Hold Trip Points
0 ≤ VIN ≤ VIH (MAX)
C1
I/O Capacitance
VCCIO = 3.3V, 2.5V, 1.8V, 1.5V, 1.2V,
VCC = 1.2V, VIO = 0 to VIH (MAX)
C2
Dedicated Input Capacitance2
VCCIO = 3.3V, 2.5V, 1.8V, 1.5V, 1.2V,
VCC = 1.2V, VIO = 0 to VIH (MAX)
2
VIL (MAX)
—
VIH (MIN)
V
—
8
—
pf
—
6
—
pf
1. Input or I/O leakage current is measured with the pin configured as an input or as an I/O with the output driver tri-stated. It is not measured
with the output driver active. Bus maintenance circuits are disabled.
2. TA 25oC, f = 1.0MHz.
3-3
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Supply Current (Standby)1, 2, 3, 4
Over Recommended Operating Conditions
Symbol
ICC
ICCAUX
Typ.5
Units
ECP2-6
10
mA
ECP2-12
20
mA
ECP2-20
30
mA
ECP2-35
50
mA
ECP2-50
70
mA
ECP2-70
100
mA
ECP2-6
24
mA
ECP2-12
24
mA
ECP2-20
24
mA
ECP2-35
24
mA
ECP2-50
24
mA
ECP2-70
24
mA
Parameter
Device
Core Power Supply Current
Auxiliary Power Supply Current
ICCGPLL
GPLL Power Supply Current (per GPLL)
ECP2-35, -50, -70 Only
0.5
mA
ICCSPLL
GPLL Power Supply Current (per SPLL)
ECP2-35, -50, -70 Only
0.5
mA
ECP2-6
2
mA
ECP2-12
2
mA
ECP2-20
2
mA
ECP2-35
2
mA
ECP2-50
2
mA
ECP2-70
2
mA
All Devices
3
mA
ICCIO
ICCJ
1.
2.
3.
4.
5.
Bank Power Supply Current (Per Bank)
VCCJ Power Supply Current
For further information about supply current, please see the list of additional technical documentation at the end of this data sheet.
Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
Frequency 0MHz.
Pattern represents a “blank” configuration data file.
TJ = 25°C, power supplies at normal voltage.
3-4
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Supply Current (Standby)1, 2, 3, 4
Over Recommended Operating Conditions
Symbol
ICC
ICCAUX
Parameter
Core Power Supply Current
Auxiliary Power Supply Current
ICCGPLL
GPLL Power Supply Current (per GPLL)
ICCSPLL
GPLL Power Supply Current (per SPLL)
ICCIO
ICCJ
1.
2.
3.
4.
5.
Typ.5
Units
ECP2M20
25
mA
ECP2M35
50
mA
ECP2M50
85
mA
ECP2M70
100
mA
ECP2M100
100
mA
ECP2M20
24
mA
ECP2M35
24
mA
ECP2M50
24
mA
ECP2M70
24
mA
ECP2M100
24
mA
All Devices
0.5
mA
Device
Bank Power Supply Current (Per Bank)
VCCJ Power Supply Current
All Devices
0.5
mA
ECP2M20
2
mA
ECP2M35
2
mA
ECP2M50
2
mA
ECP2M70
2
mA
ECP2M100
2
mA
All Devices
3
mA
For further information about supply current, please see the list of additional technical documentation at the end of this data sheet.
Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
Frequency 0MHz.
Pattern represents a “blank” configuration data file.
TJ = 25°C, power supplies at normal voltage.
3-5
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Initialization Supply Current1, 2, 3, 4
Over Recommended Operating Conditions
Symbol
Parameter
Device
ECP2-6
ICC
ICCAUX
Core Power Supply Current
Auxiliary Power Supply Current
Typ.5, 6
Units
34
mA
ECP2-12
54
mA
ECP2-20
82
mA
ECP2-35
135
mA
ECP2-50
187
mA
ECP2-70
267
mA
ECP2-6
30
mA
ECP2-12
30
mA
ECP2-20
30
mA
ECP2-35
30
mA
ECP2-50
30
mA
ECP2-70
30
mA
ICCGPLL
GPLL Power Supply Current (per GPLL)
ECP2-35, -50, -70 Only
0.5
mA
ICCSPLL
SPLL Power Supply Current (per SPLL)
ECP2-35, -50, -70 Only
0.5
mA
ICCIO
Bank Power Supply Current (per Bank)
All Devices
3
mA
ICCJ
VCCJ Power Supply Current
All Devices
4
mA
1.
2.
3.
4.
5.
6.
Until DONE signal is active.
For further information about supply current, please see the list of additional technical documentation at the end of this data sheet.
Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
Frequency 0MHz.
TJ = 25oC, power supplies at nominal voltage.
A specific configuration pattern is used that scales with the size of the device; consists of 75% PFU utilization, 50% EBR, and 25% I/O configuration.
3-6
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Initialization Supply Current1, 2, 3, 4
Over Recommended Operating Conditions
Symbol
Parameter
Device
ECP2M20
ICC
ICCAUX
Core Power Supply Current
Auxiliary Power Supply Current
Typ.5, 6
Units
41
mA
ECP2M35
107
mA
ECP2M50
169
mA
ECP2M70
254
mA
ECP2M100
378
mA
ECP2M20
30
mA
ECP2M35
30
mA
ECP2M50
30
mA
ECP2M70
30
mA
ECP2M100
30
mA
All Devices
0.5
mA
ICCGPLL
GPLL Power Supply Current (per GPLL)
ICCSPLL
SPLL Power Supply Current (per SPLL)
All Devices
0.5
mA
ICCIO
Bank Power Supply Current (per Bank)
All Devices
3
mA
ICCJ
VCCJ Power Supply Current
All Devices
4
mA
1.
2.
3.
4.
5.
6.
Until DONE signal is active.
For further information about supply current, please see the list of additional technical documentation at the end of this data sheet.
Assumes all outputs are tristated, all inputs are configured as LVCMOS and held at the VCCIO or GND.
Frequency 0MHz.
TJ = 25oC, power supplies at nominal voltage.
A specific configuration pattern is used that scales with the size of the device; consists of 75% PFU utilization, 50% EBR, and 25% I/O configuration.
3-7
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
SERDES Power Supply Requirements (LatticeECP2M Family Only)1
Over Recommended Operating Conditions
Symbol
Description
Typ.2
Units
Standby (Power Down)
ICCTX-SB
VCCTX current (per channel)
10
µA
ICCRX-SB
VCCRX current (per channel)
75
µA
ICCIB-SB
Input buffer current (per channel)
0
µA
ICCOB-SB
Output buffer current (per channel)
0
µA
ICCP-SB
SERDES PLL current (per quad)
30
µA
ICCAX33-SB
SERDES termination current (per quad)
10
µA
Operating (Data Rate = 3.125 Gbps)
ICCTX-OP
VCCTX current (per channel)
19
mA
ICCRX-OP
VCCRX current (per channel)
34
mA
ICCIB-OP
Input buffer current (per channel)
4
mA
ICCOB-OP
Output buffer current (per channel)
13
mA
ICCP-OP
SERDES PLL current (per quad)
ICCAX33-OP
SERDES termination current (per quad)
26
mA
0.01
mA
Typ.2
Units
1. Equalization enabled, pre-emphasis disabled.
2. TJ = 25°C, power supplies at nominal voltage.
SERDES Power (LatticeECP2M Family Only)
Table 3-1 presents the SERDES power for one channel.
Table 3-1. SERDES Power1
Symbol
Description
PS-1CH-31
SERDES power (one channel @ 3.125 Gbps)
90
mW
PS-1CH-25
SERDES power (one channel @ 2.5 Gbps)
87
mW
PS-1CH-12
SERDES power (one channel @ 1.25 Gbps)
86
mW
PS-1CH-02
SERDES power (one channel @ 250 Mbps)
76
mW
1. One quarter of the total quad power (includes contribution from common circuits, all channels in the quad operating, pre-emphasis disabled, equalization enabled).
2. Typical values measured at 25oC and 1.2V.
3-8
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
sysI/O Recommended Operating Conditions
VCCIO
Standard
VREF (V)
Min.
Typ.
Max.
Min.
Typ.
Max.
LVCMOS 3.32
3.135
3.3
3.465
—
—
—
LVCMOS 2.52
2.375
2.5
2.625
—
—
—
LVCMOS 1.8
1.71
1.8
1.89
—
—
—
LVCMOS 1.5
1.425
1.5
1.575
—
—
—
LVCMOS 1.22
1.14
1.2
1.26
—
—
—
LVTTL2
3.135
3.3
3.465
—
—
—
PCI
3.135
3.3
3.465
—
—
—
2
SSTL18 Class I, II
1.71
1.8
1.89
0.833
0.9
0.969
SSTL22 Class I, II
2.375
2.5
2.625
1.15
1.25
1.35
2
SSTL3 Class I, II
3.135
3.3
3.465
1.3
1.5
1.7
HSTL2 15 Class I
1.425
1.5
1.575
0.68
0.75
0.9
2
HSTL 18 Class I, II
1.71
1.8
1.89
0.816
0.9
1.08
LVDS2
2.375
2.5
2.625
—
—
—
MLVDS251
2.375
2.5
2.625
—
—
—
LVPECL331, 2
3.135
3.3
3.465
—
—
—
BLVDS25
2.375
2.5
2.625
—
—
—
RSDS1, 2
2.375
2.5
2.625
—
—
—
1, 2
2
2
SSTL18D_I , II
1.71
1.8
1.89
—
—
—
SSTL25D_ I2, II2
2.375
2.5
2.625
—
—
—
SSTL33D_ I , II
3.135
3.3
3.465
—
—
—
HSTL15D_ I2
1.425
1.5
1.575
—
—
—
1.71
1.8
1.89
—
—
—
2
2
2
2
HSTL18D_ I , II
1. Inputs on chip. Outputs are implemented with the addition of external resistors.
2. Input on this standard does not depend on the value of VCCIO.
3-9
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
sysI/O Single-Ended DC Electrical Characteristics
Input/Output
Standard
LVCMOS 3.3
LVTTL
LVCMOS 2.5
LVCMOS 1.8
LVCMOS 1.5
VIL
VIH
Min. (V)
Max. (V)
Min. (V)
Max. (V)
-0.3
0.8
2.0
3.6
-0.3
-0.3
-0.3
-0.3
0.8
0.7
0.35 VCCIO
0.35 VCCIO
2.0
1.7
0.65 VCCIO
0.65 VCCIO
3.6
3.6
3.6
3.6
LVCMOS 1.2
-0.3
0.35 VCC
0.65 VCC
3.6
PCI
-0.3
0.3 VCCIO
0.5 VCCIO
3.6
VOL
Max. (V)
VOH
Min. (V)
VCCIO - 0.4
20, 16,
12, 8, 4
-20, -16,
-12, -8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
20, 16,
12, 8, 4
-20, -16,
-12, -8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
20, 16,
12, 8, 4
-20, -16,
-12, -8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
16, 12,
8, 4
-16, -12,
-8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
8, 4
-8, -4
0.2
VCCIO - 0.2
0.1
-0.1
0.4
VCCIO - 0.4
6, 2
-6, -2
0.2
VCCIO - 0.2
0.1
-0.1
0.1 VCCIO 0.9 VCCIO
0.7
VCCIO - 1.1
1.5
-0.5
SSTL3 Class I
-0.3
VREF - 0.2
VREF + 0.2
3.6
-0.3
VREF - 0.2
VREF + 0.2
3.6
0.5
VCCIO - 0.9
SSTL2 Class I
-0.3
VREF - 0.18
VREF + 0.18
3.6
0.54
VCCIO - 0.62
SSTL2 Class II
-0.3
VREF - 0.18
VREF + 0.18
3.6
0.35
VCCIO - 0.43
SSTL18 Class I
-0.3
VREF - 0.125 VREF + 0.125
3.6
0.4
VCCIO - 0.4
HSTL Class I
-0.3
-0.3
VREF - 0.125 VREF + 0.125
VREF - 0.1
VREF + 0.1
3.6
3.6
IOH1 (mA)
0.4
SSTL3 Class II
SSTL18 Class II
IOL1 (mA)
0.28
0.4
VCCIO - 0.28
VCCIO - 0.4
HSTL18 Class I
-0.3
VREF - 0.1
VREF + 0.1
3.6
0.4
VCCIO - 0.4
HSTL18 Class II
-0.3
VREF - 0.1
VREF + 0.1
3.6
0.4
VCCIO - 0.4
8
-8
16
-16
7.6
-7.6
12
-12
15.2
-15.2
20
-20
6.7
-6.7
8
-8
11
-11
4
-4
8
-8
8
-8
12
-12
16
-16
1. The average DC current drawn by I/Os between GND connections, or between the last GND in an I/O bank and the end of an I/O bank, as
shown in the logic signal connections table shall not exceed n * 8mA, where n is the number of I/Os between bank GND connections or
between the last GND in a bank and the end of a bank.
3-10
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
sysI/O Differential Electrical Characteristics
LVDS
Over Recommended Operating Conditions
Parameter
Description
Test Conditions
Min.
Typ.
Max.
Units
0
—
2.4
V
0.05
—
2.35
V
+/-100
—
—
mV
—
—
+/-10
µA
—
1.38
1.60
V
VINP, VINM
Input Voltage
VCM
Input Common Mode Voltage
Half the Sum of the Two Inputs
VTHD
Differential Input Threshold
Difference Between the Two Inputs
IIN
Input Current
Power On or Power Off
VOH
Output High Voltage for VOP or VOM
RT = 100 Ohm
VOL
Output Low Voltage for VOP or VOM
RT = 100 Ohm
0.9V
1.03
—
V
VOD
Output Voltage Differential
(VOP - VOM), RT = 100 Ohm
250
350
450
mV
ΔVOD
Change in VOD Between High and
Low
—
—
50
mV
1.125
1.20
1.375
V
—
—
50
mV
VOS
Output Voltage Offset
ΔVOS
Change in VOS Between H and L
ISA
Output Short Circuit Current
VOD = 0V Driver Outputs Shorted to
Ground
—
—
24
mA
ISAB
Output Short Circuit Current
VOD = 0V Driver Outputs Shorted to
Each Other
—
—
12
mA
(VOP + VOM)/2, RT = 100 Ohm
Differential HSTL and SSTL
Differential HSTL and SSTL outputs are implemented as a pair of complementary single-ended outputs. All allowable single-ended output classes (class I and class II) are supported in this mode.
For further information about LVPECL, RSDS, MLVDS, BLVDS and other differential interfaces please see the list
of additional technical information at the end of this data sheet.
3-11
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LVDS25E
The top and bottom sides of LatticeECP2/M devices support LVDS outputs via emulated complementary LVCMOS
outputs in conjunction with a parallel resistor across the driver outputs. The scheme shown in Figure 3-1 is one
possible solution for point-to-point signals.
Figure 3-1. LVDS25E Output Termination Example
VCCIO = 2.5V (±5%)
RS=158 ohms
(±1%)
8 mA
VCCIO = 2.5V (±5%)
RS=158 ohms
(±1%)
RP = 140 ohms
(±1%)
+
-
RT = 100 ohms
(±1%)
8 mA
Transmission line, Zo = 100 ohm differential
OFF-chip ON-chip
ON-chip OFF-chip
Table 3-2. LVDS25E DC Conditions
Parameter
Description
VCCIO
Output Driver Supply (+/-5%)
Typical
Units
2.50
V
ZOUT
Driver Impedance
20
Ω
RS
Driver Series Resistor (+/-1%)
158
Ω
RP
Driver Parallel Resistor (+/-1%)
140
Ω
RT
Receiver Termination (+/-1%)
100
Ω
VOH
Output High Voltage
1.43
V
VOL
Output Low Voltage
1.07
V
VOD
Output Differential Voltage
0.35
V
VCM
Output Common Mode Voltage
1.25
V
ZBACK
Back Impedance
100.5
Ω
IDC
DC Output Current
6.03
mA
LVCMOS33D
All I/O banks support emulated differential I/O using the LVCMOS33D I/O type. This option, along with the external
resistor network, provides the system designer the flexibility to place differential outputs on an I/O bank with 3.3V
VCCIO. The default drive current for LVCMOS33D output is 12mA with the option to change the device strength to
4mA, 8mA, 16mA or 20mA. Follow the LVCMOS33 specifications for the DC characteristics of the LVCMOS33D.
3-12
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
BLVDS
The LatticeECP2/M devices support the BLVDS standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel external resistor across the driver outputs. BLVDS is intended for use
when multi-drop and bi-directional multi-point differential signaling is required. The scheme shown in Figure 3-2 is
one possible solution for bi-directional multi-point differential signals.
Figure 3-2. BLVDS Multi-point Output Example
Heavily loaded backplane, effective Zo ~ 45 to 90 ohms differential
2.5V
RS =
90 ohms
RS =
90 ohms
16mA
2.5V
16mA
45-90
ohms
45-90
ohms
RTL
RTR
2.5V
2.5V
16mA
16mA
RS =
90 ohms
RS =
90 ohms
+
2.5V
2.5V
16mA
RS =
90 ohms
...
+
-
-
16mA
RS =
90 ohms
+
-
2.5V
+
RS = 90 ohms
RS = 90 ohms
2.5V
16mA
-
16mA
Table 3-3. BLVDS DC Conditions1
Over Recommended Operating Conditions
Typical
Parameter
Description
Zo = 45Ω
Zo = 90Ω
Units
VCCIO
Output Driver Supply (+/- 5%)
2.50
2.50
V
ZOUT
Driver Impedance
10.00
10.00
Ω
RS
Driver Series Resistor (+/- 1%)
90.00
90.00
Ω
RTL
Driver Parallel Resistor (+/- 1%)
45.00
90.00
Ω
RTR
Receiver Termination (+/- 1%)
45.00
90.00
Ω
VOH
Output High Voltage
1.38
1.48
V
VOL
Output Low Voltage
1.12
1.02
V
VOD
Output Differential Voltage
0.25
0.46
V
VCM
Output Common Mode Voltage
1.25
1.25
V
IDC
DC Output Current
11.24
10.20
mA
1. For input buffer, see LVDS table.
3-13
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LVPECL
The LatticeECP2/M devices support the differential LVPECL standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The LVPECL input standard is supported by the LVDS differential input buffer. The scheme shown in Figure 3-3 is one possible solution for
point-to-point signals.
Figure 3-3. Differential LVPECL
VCCIO = 3.3V
(+/-5%)
RS = 93.1 ohms
(+/-1%)
16mA
VCCIO = 3.3V
(+/-5%)
RP = 196 ohms
(+/-1%)
RS = 93.1 ohms
(+/-1%)
16mA
+
RT = 100 ohms
(+/-1%)
-
Transmission line,
Zo = 100 ohm differential
On-chip
Off-chip
Off-chip
On-chip
Table 3-4. LVPECL DC Conditions1
Over Recommended Operating Conditions
Parameter
Description
VCCIO
Output Driver Supply (+/-5%)
ZOUT
Driver Impedance
RS
RP
RT
VOH
Typical
Units
3.30
V
10
Ω
Driver Series Resistor (+/-1%)
93
Ω
Driver Parallel Resistor (+/-1%)
196
Ω
Receiver Termination (+/-1%)
100
Ω
Output High Voltage
2.05
V
VOL
Output Low Voltage
1.25
V
VOD
Output Differential Voltage
0.80
V
VCM
Output Common Mode Voltage
1.65
V
ZBACK
Back Impedance
100.5
Ω
IDC
DC Output Current
12.11
mA
1. For input buffer, see LVDS table.
3-14
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
RSDS
The LatticeECP2/M devices support differential RSDS standard. This standard is emulated using complementary
LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The RSDS input standard is supported by the LVDS differential input buffer. The scheme shown in Figure 3-4 is one possible solution for RSDS
standard implementation. Resistor values in Figure 3-4 are industry standard values for 1% resistors.
Figure 3-4. RSDS (Reduced Swing Differential Signaling)
VCCIO = 2.5V
(+/-5%)
RS = 294 ohms
(+/-1%)
8mA
VCCIO = 2.5V
(+/-5%)
RS = 294 ohms
(+/-1%)
8mA
RP = 121 ohms
(+/-1%)
+
RT = 100 ohms
(+/-1%)
-
Transmission line,
Zo = 100 ohm differential
On-chip
Off-chip
Off-chip
On-chip
Table 3-5. RSDS DC Conditions1
Over Recommended Operating Conditions
Parameter
Description
Typical
Units
VCCIO
Output Driver Supply (+/-5%)
2.50
V
ZOUT
Driver Impedance
20
Ω
RS
Driver Series Resistor (+/-1%)
294
Ω
RP
Driver Parallel Resistor (+/-1%)
121
Ω
RT
Receiver Termination (+/-1%)
100
Ω
VOH
Output High Voltage
1.35
V
VOL
Output Low Voltage
1.15
V
VOD
Output Differential Voltage
0.20
V
VCM
Output Common Mode Voltage
1.25
V
ZBACK
Back Impedance
101.5
Ω
IDC
DC Output Current
3.66
mA
1. For input buffer, see LVDS table.
3-15
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
MLVDS
The LatticeECP2/M devices support the differential MLVDS standard. This standard is emulated using complementary LVCMOS outputs in conjunction with a parallel resistor across the driver outputs. The MLVDS input standard is
supported by the LVDS differential input buffer. The scheme shown in Figure 3-5 is one possible solution for
MLVDS standard implementation. Resistor values in Figure 3-5 are industry standard values for 1% resistors.
Figure 3-5. MLVDS (Multipoint Low Voltage Differential Signaling)
Heavily loaded backplace, effective Zo~50 to 70 ohms differential
2.5V
RS =
35ohms
RS =
35ohms
2.5V
16mA
16mA
2.5V
RTL
50 to 70 ohms +/-1%
50 to 70 ohms +/-1%
RTR
2.5V
16mA
RS =
35ohms
16mA
RS =
35ohms
RS =
35ohms
+
-
RS =
35ohms
RS =
35ohms
RS =
35ohms
+
-
2.5V
2.5V
2.5V
16mA
16mA
-
+
-
+
...
2.5V
16mA
16mA
Table 3-6. MLVDS DC Conditions1
Typical
Parameter
Description
Zo=50Ω
Zo=70Ω
Units
VCCIO
Output Driver Supply (+/-5%)
2.50
2.50
V
ZOUT
Driver Impedance
10.00
10.00
Ω
RS
Driver Series Resistor (+/-1%)
35.00
35.00
Ω
RTL
Driver Parallel Resistor (+/-1%)
50.00
70.00
Ω
RTR
Receiver Termination (+/-1%)
50.00
70.00
Ω
VOH
Output High Voltage
1.52
1.60
V
VOL
Output Low Voltage
0.98
0.90
V
VOD
Output Differential Voltage
0.54
0.70
V
VCM
Output Common Mode Voltage
1.25
1.25
V
IDC
DC Output Current
21.74
20.00
mA
1. For input buffer, see LVDS table.
For further information about LVPECL, RSDS, MLVDS, BLVDS and other differential interfaces please see the list
of additional technical information at the end of this data sheet.
3-16
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Typical Building Block Function Performance1
Pin-to-Pin Performance (LVCMOS25 12mA Drive)
Function
-7 Timing
Units
16-bit Decoder
3.8
ns
32-bit Decoder
4.5
ns
Basic Functions
64-bit Decoder
5.0
ns
4:1 MUX
3.2
ns
8:1 MUX
3.4
ns
16:1 MUX
3.5
ns
32:1 MUX
4.0
ns
1. These timing numbers were generated using the ispLEVER design tool. Exact performance may vary with device and tool version. The tool
uses internal parameters that have been characterized but are not tested on every device.
Timing v.A 0.11
Register-to-Register Performance
Function
-7 Timing
Units
16-bit Decoder
599
MHz
32-bit Decoder
542
MHz
64-bit Decoder
417
MHz
4:1 MUX
847
MHz
8:1 MUX
803
MHz
16:1 MUX
660
MHz
32:1 MUX
577
MHz
8-bit Adder
591
MHz
16-bit Adder
500
MHz
64-bit Adder
306
MHz
16-bit Counter
488
MHz
32-bit Counter
378
MHz
64-bit Counter
260
MHz
64-bit Accumulator
253
MHz
512x36 Single Port RAM, EBR Output
Registers
370
MHz
1024x18 True-Dual Port RAM (Write
Through or Normal, EBR Output Registers)
370
MHz
1024x18 True-Dual Port RAM (Write
Through or Normal, PLC Output
Registers)
280
MHz
16x4 Pseudo-Dual Port RAM (One PFU)
819
MHz
32x4 Pseudo-Dual Port RAM
521
MHz
64x8 Pseudo-Dual Port RAM
435
MHz
420
MHz
Basic Functions
Embedded Memory Functions
Distributed Memory Functions
DSP Functions
18x18 Multiplier (All Registers)
3-17
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Register-to-Register Performance (Continued)
Function
-7 Timing
Units
9x9 Multiplier (All Registers)
420
MHz
36x36 Multiplier
(All Registers)
372
MHz
18x18 Multiplier/Accumulate (Input and
Output Registers)
295
MHz
18x18 Multiplier-Add/Sub-Sum (All Registers)
420
MHz
16-Tap Fully-Parallel FIR Filter
304
MHz
1024-pt, Radix 4, Decimation in
Frequency FFT
227
MHz
8x8 Matrix Multiplier
223
MHz
DSP IP Functions
Timing v.A 0.11
Derating Timing Tables
Logic timing provided in the following sections of this data sheet and the ispLEVER design tools are worst case
numbers in the operating range. Actual delays at nominal temperature and voltage for best case process, can be
much better than the values given in the tables. The ispLEVER design tool can provide logic timing numbers at a
particular temperature and voltage.
3-18
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M External Switching Characteristics9
Over Recommended Operating Conditions
-7
Parameter
Description
Device
Min.
-6
-5
Max.
Min.
Max.
Min.
Max.
Units
General I/O Pin Parameters (using Primary Clock without PLL)1
tCO
Clock to Output - PIO Output
Register
LFE2-6
—
3.50
—
3.90
—
4.20
ns
LFE2-12
—
3.50
—
3.90
—
4.20
ns
LFE2-20
—
3.50
—
3.90
—
4.20
ns
LFE2-35
—
3.50
—
3.90
—
4.20
ns
LFE2-50
—
3.50
—
3.90
—
4.20
ns
LFE2-70
—
3.70
—
4.10
—
4.40
ns
LFE2M20
—
3.90
—
4.30
—
4.70
ns
LFE2M35
—
3.90
—
4.30
—
4.70
ns
LFE2M50
—
4.50
—
5.00
—
5.40
ns
LFE2M70
—
4.50
—
5.00
—
5.40
ns
LFE2M100
tSU
tH
Clock to Data Setup - PIO Input
Register
Clock to Data Hold - PIO Input
Register
—
4.50
—
5.00
—
5.40
ns
LFE2-6
0.00
—
0.00
—
0.00
—
ns
LFE2-12
0.00
—
0.00
—
0.00
—
ns
LFE2-20
0.00
—
0.00
—
0.00
—
ns
LFE2-35
0.00
—
0.00
—
0.00
—
ns
LFE2-50
0.00
—
0.00
—
0.00
—
ns
LFE2-70
0.00
—
0.00
—
0.00
—
ns
LFE2M20
0.00
—
0.00
—
0.00
—
ns
LFE2M35
0.00
—
0.00
—
0.00
—
ns
LFE2M50
0.00
—
0.00
—
0.00
—
ns
LFE2M70
0.00
—
0.00
—
0.00
—
ns
LFE2M100
0.00
—
0.00
—
0.00
—
ns
LFE2-6
1.40
—
1.70
—
1.90
—
ns
LFE2-12
1.40
—
1.70
—
1.90
—
ns
LFE2-20
1.40
—
1.70
—
1.90
—
ns
LFE2-35
1.40
—
1.70
—
1.90
—
ns
LFE2-50
1.40
—
1.70
—
1.90
—
ns
LFE2-70
1.40
—
1.70
—
1.90
—
ns
LFE2M20
1.40
—
1.70
—
1.90
—
ns
LFE2M35
1.40
—
1.70
—
1.90
—
ns
LFE2M50
1.80
—
2.10
—
2.30
—
ns
LFE2M70
1.80
—
2.10
—
2.30
—
ns
LFE2M100
1.80
—
2.10
—
2.30
—
ns
3-19
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M External Switching Characteristics9 (Continued)
Over Recommended Operating Conditions
-7
Parameter
tSU_DEL
tH_DEL
fMAX_IO
Description
Clock to Data Setup - PIO Input
Register with Data Input Delay
Device
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
LFE2-6
1.40
—
1.70
—
1.90
—
ns
LFE2-12
1.40
—
1.70
—
1.90
—
ns
LFE2-20
1.40
—
1.70
—
1.90
—
ns
LFE2-35
1.40
—
1.70
—
1.90
—
ns
LFE2-50
1.40
—
1.70
—
1.90
—
ns
LFE2-70
1.40
—
1.70
—
1.90
—
ns
LFE2M20
1.40
—
1.70
—
1.90
—
ns
LFE2M35
1.40
—
1.70
—
1.90
—
ns
LFE2M50
1.40
—
1.70
—
1.90
—
ns
LFE2M70
1.40
—
1.70
—
1.90
—
ns
LFE2M100
1.40
—
1.70
—
1.90
—
ns
LFE2-6
0.00
—
0.00
—
0.00
—
ns
LFE2-12
0.00
—
0.00
—
0.00
—
ns
LFE2-20
0.00
—
0.00
—
0.00
—
ns
LFE2-35
0.00
—
0.00
—
0.00
—
ns
LFE2-50
0.00
—
0.00
—
0.00
—
ns
Clock to Data Hold - PIO Input RegLFE2-70
ister with Input Data Delay
LFE2M20
0.00
—
0.00
—
0.00
—
ns
0.00
—
0.00
—
0.00
—
ns
LFE2M35
0.00
—
0.00
—
0.00
—
ns
LFE2M50
0.00
—
0.00
—
0.00
—
ns
LFE2M70
0.00
—
0.00
—
0.00
—
ns
LFE2M100
0.00
—
0.00
—
0.00
—
ns
—
420
—
357
—
311
MHz
LFE2-6
—
2.60
—
2.90
—
3.20
ns
LFE2-12
—
2.60
—
2.90
—
3.20
ns
LFE2-20
—
2.60
—
2.90
—
3.20
ns
LFE2-35
—
2.60
—
2.90
—
3.20
ns
LFE2-50
—
2.60
—
2.90
—
3.20
ns
LFE2-70
—
2.60
—
2.90
—
3.20
ns
LFE2M20
—
2.60
—
2.90
—
3.20
ns
LFE2M35
—
2.60
—
2.90
—
3.20
ns
LFE2M50
—
3.10
—
3.40
—
3.70
ns
LFE2M70
—
3.10
—
3.40
—
3.70
ns
LFE2M100
—
3.10
—
3.40
—
3.70
ns
Clock Frequency of I/O Register and
ECP2/M
PFU Register
General I/O Pin Parameters (using Edge Clock without PLL)1
tCOE
Clock to Output - PIO Output
Register
3-20
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M External Switching Characteristics9 (Continued)
Over Recommended Operating Conditions
-7
Parameter
tSUE
tHE
tSU_DELE
Description
Clock to Data Setup - PIO Input
Register
Clock to Data Hold - PIO Input
Register
Clock to Data Setup - PIO Input
Register with Data Input Delay
Device
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
LFE2-6
0.00
—
0.00
—
0.00
—
ns
LFE2-12
0.00
—
0.00
—
0.00
—
ns
LFE2-20
0.00
—
0.00
—
0.00
—
ns
LFE2-35
0.00
—
0.00
—
0.00
—
ns
LFE2-50
0.00
—
0.00
—
0.00
—
ns
LFE2-70
0.00
—
0.00
—
0.00
—
ns
LFE2M20
0.00
—
0.00
—
0.00
—
ns
LFE2M35
0.00
—
0.00
—
0.00
—
ns
LFE2M50
0.00
—
0.00
—
0.00
—
ns
LFE2M70
0.00
—
0.00
—
0.00
—
ns
LFE2M100
0.00
—
0.00
—
0.00
—
ns
LFE2-6
0.90
—
1.10
—
1.30
—
ns
LFE2-12
0.90
—
1.10
—
1.30
—
ns
LFE2-20
0.90
—
1.10
—
1.30
—
ns
LFE2-35
0.90
—
1.10
—
1.30
—
ns
LFE2-50
0.90
—
1.10
—
1.30
—
ns
LFE2-70
0.90
—
1.10
—
1.30
—
ns
LFE2M20
0.90
—
1.10
—
1.30
—
ns
LFE2M35
0.90
—
1.10
—
1.30
—
ns
LFE2M50
1.20
—
1.40
—
1.60
—
ns
LFE2M70
1.20
—
1.40
—
1.60
—
ns
LFE2M100
1.20
—
1.40
—
1.60
—
ns
LFE2-6
1.00
—
1.30
—
1.60
—
ns
LFE2-12
1.00
—
1.30
—
1.60
—
ns
LFE2-20
1.00
—
1.30
—
1.60
—
ns
LFE2-35
1.00
—
1.30
—
1.60
—
ns
LFE2-50
1.00
—
1.30
—
1.60
—
ns
LFE2-70
1.00
—
1.30
—
1.60
—
ns
LFE2M20
1.20
—
1.60
—
1.90
—
ns
LFE2M35
1.20
—
1.60
—
1.90
—
ns
LFE2M50
1.20
—
1.60
—
1.90
—
ns
LFE2M70
1.20
—
1.60
—
1.90
—
ns
LFE2M100
1.20
—
1.60
—
1.90
—
ns
3-21
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M External Switching Characteristics9 (Continued)
Over Recommended Operating Conditions
-7
Parameter
tH_DELE
fMAX_IOE
Description
Clock to Data Hold - PIO Input
Register with Input Data Delay
Clock Frequency of I/O and PFU
Register
Device
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
LFE2-6
0.00
—
0.00
—
0.00
—
ns
LFE2-12
0.00
—
0.00
—
0.00
—
ns
LFE2-20
0.00
—
0.00
—
0.00
—
ns
LFE2-35
0.00
—
0.00
—
0.00
—
ns
LFE2-50
0.00
—
0.00
—
0.00
—
ns
LFE2-70
0.00
—
0.00
—
0.00
—
ns
LFE2M20
0.00
—
0.00
—
0.00
—
ns
LFE2M35
0.00
—
0.00
—
0.00
—
ns
LFE2M50
0.00
—
0.00
—
0.00
—
ns
LFE2M70
0.00
—
0.00
—
0.00
—
ns
LFE2M100
0.00
—
0.00
—
0.00
—
ns
—
420
—
357
—
311
MHz
LFE2-6
—
2.30
—
2.60
—
2.80
ns
LFE2-12
—
2.30
—
2.60
—
2.80
ns
LFE2-20
—
2.30
—
2.60
—
2.80
ns
LFE2-35
—
2.30
—
2.60
—
2.80
ns
LFE2-50
—
2.30
—
2.60
—
2.80
ns
LFE2-70
—
2.30
—
2.60
—
2.80
ns
LFE2M20
—
2.30
—
2.60
—
2.80
ns
LFE2M35
—
2.30
—
2.60
—
2.80
ns
LFE2M50
—
2.60
—
2.90
—
3.10
ns
LFE2M70
—
2.60
—
2.90
—
3.10
ns
ECP2/M
General I/O Pin Parameters (using Primary Clock with PLL)1
tCOPLL10
Clock to Output - PIO Output
Register
LFE2M100
tSUPLL
Clock to Data Setup - PIO Input
Register
—
2.70
—
3.00
—
3.20
ns
LFE2-6
0.70
—
0.80
—
0.90
—
ns
LFE2-12
0.70
—
0.80
—
0.90
—
ns
LFE2-20
0.70
—
0.80
—
0.90
—
ns
LFE2-35
0.70
—
0.80
—
0.90
—
ns
LFE2-50
0.70
—
0.80
—
0.90
—
ns
LFE2-70
0.70
—
0.80
—
0.90
—
ns
LFE2M20
0.70
—
0.80
—
0.90
—
ns
LFE2M35
0.70
—
0.80
—
0.90
—
ns
LFE2M50
0.70
—
0.80
—
0.90
—
ns
LFE2M70
0.70
—
0.80
—
0.90
—
ns
LFE2M100
0.80
—
0.90
—
1.00
—
ns
3-22
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M External Switching Characteristics9 (Continued)
Over Recommended Operating Conditions
-7
Parameter
tHPLL
tSU_DELPLL
tH_DELPLL
Description
Clock to Data Hold - PIO Input
Register
Clock to Data Setup - PIO Input
Register with Data Input Delay
Clock to Data Hold - PIO Input
Register with Input Data Delay
Device
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
LFE2-6
1.00
—
1.20
—
1.40
—
ns
LFE2-12
1.00
—
1.20
—
1.40
—
ns
LFE2-20
1.00
—
1.20
—
1.40
—
ns
LFE2-35
1.00
—
1.20
—
1.40
—
ns
LFE2-50
1.00
—
1.20
—
1.40
—
ns
LFE2-70
1.00
—
1.20
—
1.40
—
ns
LFE2M20
1.00
—
1.20
—
1.40
—
ns
LFE2M35
1.00
—
1.20
—
1.40
—
ns
LFE2M50
1.00
—
1.20
—
1.40
—
ns
LFE2M70
1.00
—
1.20
—
1.40
—
ns
LFE2M100
1.00
—
1.20
—
1.40
—
ns
LFE2-6
1.80
—
2.00
—
2.20
—
ns
LFE2-12
1.80
—
2.00
—
2.20
—
ns
LFE2-20
1.80
—
2.00
—
2.20
—
ns
LFE2-35
1.80
—
2.00
—
2.20
—
ns
LFE2-50
1.80
—
2.00
—
2.20
—
ns
LFE2-70
1.80
—
2.00
—
2.20
—
ns
LFE2M20
1.80
—
2.00
—
2.20
—
ns
LFE2M35
1.80
—
2.00
—
2.20
—
ns
LFE2M50
1.90
—
2.10
—
2.30
—
ns
LFE2M70
1.90
—
2.10
—
2.30
—
ns
LFE2M100
2.00
—
2.20
—
2.40
—
ns
LFE2-6
0.00
—
0.00
—
0.00
—
ns
LFE2-12
0.00
—
0.00
—
0.00
—
ns
LFE2-20
0.00
—
0.00
—
0.00
—
ns
LFE2-35
0.00
—
0.00
—
0.00
—
ns
LFE2-50
0.00
—
0.00
—
0.00
—
ns
LFE2-70
0.00
—
0.00
—
0.00
—
ns
LFE2M20
0.00
—
0.00
—
0.00
—
ns
LFE2M35
0.00
—
0.00
—
0.00
—
ns
LFE2M50
0.00
—
0.00
—
0.00
—
ns
LFE2M70
0.00
—
0.00
—
0.00
—
ns
LFE2M100
0.00
—
0.00
—
0.00
—
ns
DDR I/O Pin Parameters2
tDVADQ
Data Valid After DQS (DDR Read)
ECP2/M
—
0.225
—
0.225
—
0.225
UI
tDVEDQ
Data Hold After DQS (DDR Read)
ECP2/M
0.640
—
0.640
—
0.640
—
UI
tDQVBS
Data Valid Before DQS (DDR Write) ECP2/M
0.250
—
0.250
—
0.250
—
UI
tDQVAS
Data Valid After DQS (DDR Write)
ECP2/M
0.250
—
0.250
—
0.250
—
UI
ECP2/M
95
200
95
166
95
133
MHz
fMAX_DDR
6
DDR Clock Frequency
DDR2 I/O Pin Parameters3
tDVADQ
Data Valid After DQS (DDR Read)
ECP2/M
—
0.225
—
0.225
—
0.225
UI
tDVEDQ
Data Hold After DQS (DDR Read)
ECP2/M
0.640
—
0.640
—
0.640
—
UI
3-23
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M External Switching Characteristics9 (Continued)
Over Recommended Operating Conditions
-7
Parameter
Description
Device
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
tDQVBS
Data Valid Before DQS (DDR Write) ECP2/M
0.250
—
0.250
—
0.250
—
UI
tDQVAS
Data Valid After DQS (DDR Write)
ECP2/M
0.250
—
0.250
—
0.250
—
UI
fMAX_DDR2
DDR Clock Frequency
ECP2/M
133
266
133
200
133
166
MHz
ECP2-20
—
750
—
622
—
622
Mbps
ECP2-35
—
750
—
622
—
622
Mbps
ECP2-50
—
750
—
622
—
622
Mbps
ECP2-70
—
750
—
622
—
622
Mbps
ECP2M20
—
622
—
622
—
622
Mbps
ECP2M35
—
622
—
622
—
622
Mbps
ECP2M50
—
622
—
622
—
622
Mbps
ECP2M70
—
622
—
622
—
622
Mbps
SPI4.2 I/O Pin Parameters Static Alignment4, 8, 11
Maximum Data Rate
tDVACLKSPI
tDVECLKSPI
tDIASPI
Data Valid After CLK (Receive)
Data Hold After CLK (Receive)
Data Invalid After Clock (Transmit)
ECP2M100
—
622
—
622
—
622
Mbps
ECP2-20
—
0.25
—
0.25
—
0.25
UI
ECP2-35
—
0.25
—
0.25
—
0.25
UI
ECP2-50
—
0.25
—
0.25
—
0.25
UI
ECP2-70
—
0.25
—
0.25
—
0.25
UI
ECP2M20
—
0.21
—
0.21
—
0.21
UI
ECP2M35
—
0.21
—
0.21
—
0.21
UI
ECP2M50
—
0.21
—
0.21
—
0.21
UI
ECP2M70
—
0.21
—
0.21
—
0.21
UI
ECP2M100
—
0.21
—
0.21
—
0.21
UI
ECP2-20
0.75
—
0.75
—
0.75
—
UI
ECP2-35
0.75
—
0.75
—
0.75
—
UI
ECP2-50
0.75
—
0.75
—
0.75
—
UI
ECP2-70
0.75
—
0.75
—
0.75
—
UI
ECP2M20
0.79
—
0.79
—
0.79
—
UI
ECP2M35
0.79
—
0.79
—
0.79
—
UI
ECP2M50
0.79
—
0.79
—
0.79
—
UI
ECP2M70
0.79
—
0.79
—
0.79
—
UI
ECP2M100
0.79
—
0.79
—
0.79
—
UI
ECP2-20
—
280
—
280
—
280
ps
ECP2-35
—
280
—
280
—
280
ps
ECP2-50
—
280
—
280
—
280
ps
ECP2-70
—
280
—
280
—
280
ps
ECP2M20
—
230
—
230
—
230
ps
ECP2M35
—
230
—
230
—
230
ps
ECP2M50
—
230
—
230
—
230
ps
ECP2M70
—
230
—
230
—
230
ps
ECP2M100
—
230
—
230
—
230
ps
3-24
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M External Switching Characteristics9 (Continued)
Over Recommended Operating Conditions
-7
Parameter
tDIBSPI
Description
Device
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
ECP2-20
—
280
—
280
—
280
ps
ECP2-35
—
280
—
280
—
280
ps
ECP2-50
—
280
—
280
—
280
ps
ECP2-70
—
280
—
280
—
280
ps
Data Invalid Before Clock (Transmit) ECP2M20
—
230
—
230
—
230
ps
ECP2M35
—
230
—
230
—
230
ps
ECP2M50
—
230
—
230
—
230
ps
ECP2M70
—
230
—
230
—
230
ps
ECP2M100
—
230
—
230
—
230
ps
XGMII I/O Pin Parameters (312 Mbps)5
tSUXGMII
Data Setup Before Read Clock
ECP2/M
480
—
480
—
480
—
ps
tHXGMII
Data Hold After Read Clock
ECP2/M
480
—
480
—
480
—
ps
tDVBCKXGMII Data Valid Before Clock
ECP2/M
960
—
960
—
960
—
ps
tDVACKXGMII Data Valid After Clock
ECP2/M
960
—
960
—
960
—
ps
ECP2/M
—
420
—
357
—
311
MHz
Primary
fMAX_PRI7
Frequency for Primary Clock Tree
tW_PRI
Clock Pulse Width for Primary Clock ECP2/M
tSKEW_PRI
Primary Clock Skew Within a Bank
0.95
—
1.19
—
2.00
—
ns
ECP2/M
—
300
—
360
—
420
ps
ECP2/M
—
420
—
357
—
311
MHz
ECP2/M
0.95
—
1.19
—
2.00
—
ns
—
300
—
360
—
420
ps
Edge Clock
fMAX_EDGE7 Frequency for Edge Clock
tW_EDGE
Clock Pulse Width for Edge Clock
Edge Clock Skew Within an Edge of
ECP2/M
tSKEW_EDGE
the Device
1.
2.
3.
4.
5.
General timing numbers based on LVCMOS 2.5, 12mA, 0pf load.
DDR timing numbers based on SSTL25 for BGA packages only.
DDR2 timing numbers based on SSTL18 for BGA packages only.
SPI4.2 and SFI4 timing numbers based on LVDS25 for BGA packages only.
XGMII timing numbers based on HSTL class I. A corresponding left/right dedicated clock buffer is used when using the SPI4.2 interface to
the left or right edge of the device. For SPI4.2 mode, the software tool will help in selecting the appropriate clock buffer.
6. IP will be used to support DDR and DDR2 memory data rates down to 95MHz. This approach uses a free-running clock and PFU register to
sample the data instead of the hardwired DDR memory interface.
7. Using the LVDS I/O standard.
8. ECP2-6 and ECP2-12 do not support SPI4.2
9. The AC numbers do not apply to PCLK6 and PCLK7.
10. Applies to CLKOP only.
11. Please refer to technical note TN1159, LatticeECP2M Pin Assignment Recommendations for best performance.
Timing v.A 0.11
3-25
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 3-6. SPI4.2 Parameters
Transmit Parameters
tDIBSPI
tDIASPI
CLK
Data (TDAT, TCTL)
tDIASPI
tDIBSPI
Receiver Parameters
RDTCLK
Data (RDAT,RCTL)
tDVACLKSPI
tDVACLKSPI
tDVECLKSPI
tDVECLKSPI
3-26
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 3-7. DDR and DDR2 Parameters
Transmit Parameters
DQS
DQ
tDQVBS
tDQVAS
tDQVAS
tDQVBS
Receiver Parameters
DQS
DQ
tDVADQ
tDVADQ
tDVEDQ
tDVEDQ
Figure 3-8. XGMII Parameters
Transmit Parameters
CLOCK
DATA
tDVBCKXGMII
t DVACKXGMII
t DVACKXGMII
t DVBCKXGMII
Receiver Parameters
CLOCK
DATA
tSUXGMII
tSUXGMII
tHXGMII
tHXGMII
3-27
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M Internal Switching Characteristics1
Over Recommended Operating Conditions
-7
Parameter
Description
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
PFU/PFF Logic Mode Timing
tLUT4_PFU
LUT4 delay (A to D inputs to F output)
—
0.180
—
0.198
—
0.216
ns
tLUT6_PFU
LUT6 delay (A to D inputs to OFX output)
—
0.304
—
0.331
—
0.358
ns
tLSR_PFU
Set/Reset to output of PFU (Asynchronous)
—
0.600
—
0.655
—
0.711
ns
tSUM_PFU
Clock to Mux (M0,M1) Input Setup Time
0.128
—
0.129
—
0.129
—
ns
tHM_PFU
Clock to Mux (M0,M1) Input Hold Time
-0.051
—
-0.049
—
-0.046
—
ns
tSUD_PFU
Clock to D input setup time
0.061
—
0.071
—
0.081
—
ns
tHD_PFU
Clock to D input hold time
0.002
—
0.003
—
0.003
—
ns
tCK2Q_PFU
Clock to Q delay, (D-type Register Configuration)
—
0.285
—
0.309
—
0.333
ns
—
0.902
—
1.083
—
1.263
ns
PFU Dual Port Memory Mode Timing
tCORAM_PFU
Clock to Output (F Port)
tSUDATA_PFU
Data Setup Time
-0.172
—
-0.205
—
-0.238
—
ns
tHDATA_PFU
Data Hold Time
0.199
—
0.235
—
0.271
—
ns
tSUADDR_PFU
Address Setup Time
-0.245
—
-0.284
—
-0.323
—
ns
tHADDR_PFU
Address Hold Time
0.246
—
0.285
—
0.324
—
ns
tSUWREN_PFU
Write/Read Enable Setup Time
-0.122
—
-0.145
—
-0.168
—
ns
tHWREN_PFU
Write/Read Enable Hold Time
0.132
—
0.156
—
0.180
—
ns
PIC Timing
PIO Input/Output Buffer Timing
tIN_PIO
Input Buffer Delay (LVCMOS25)
—
0.613
—
0.681
—
0.749
ns
tOUT_PIO
Output Buffer Delay (LVCMOS25)
—
1.115
—
1.115
—
1.343
ns
IOLOGIC Input/Output Timing
tSUI_PIO
Input Register Setup Time (Data Before
Clock)
0.596
—
0.645
—
0.694
—
ns
tHI_PIO
Input Register Hold Time (Data after
Clock)
-0.570
—
-0.614
—
-0.658
—
ns
tCOO_PIO
Output Register Clock to Output Delay
—
0.61
—
0.66
—
0.72
ns
tSUCE_PIO
Input Register Clock Enable Setup Time
0.032
—
0.037
—
0.041
—
ns
tHCE_PIO
Input Register Clock Enable Hold Time
-0.022
—
-0.025
—
-0.028
—
ns
tSULSR_PIO
Set/Reset Setup Time
0.184
—
0.201
—
0.217
—
ns
tHLSR_PIO
Set/Reset Hold Time
-0.080
—
-0.086
—
-0.093
—
ns
EBR Timing
tCO_EBR
Clock (Read) to output from Address or
Data
—
2.51
—
2.75
—
2.99
ns
tCOO_EBR
Clock (Write) to output from EBR output
Register
—
0.33
—
0.36
—
0.39
ns
tSUDATA_EBR
Setup Data to EBR Memory
-0.157
—
-0.181
—
-0.205
—
ns
tHDATA_EBR
Hold Data to EBR Memory
0.173
—
0.195
—
0.217
—
ns
tSUADDR_EBR
Setup Address to EBR Memory
-0.115
—
-0.130
—
-0.145
—
ns
tHADDR_EBR
Hold Address to EBR Memory
0.138
—
0.155
—
0.172
—
ns
tSUWREN_EBR
Setup Write/Read Enable to PFU Memory
-0.128
—
-0.149
—
-0.170
—
ns
3-28
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M Internal Switching Characteristics1 (Continued)
Over Recommended Operating Conditions
-7
Parameter
Description
-6
-5
Min.
Max.
Min.
Max.
Min.
Max.
Units
tHWREN_EBR
Hold Write/Read Enable to PFU Memory
0.139
—
0.156
—
0.173
—
ns
tSUCE_EBR
Clock Enable Setup Time to EBR Output
Register
0.123
—
0.134
—
0.145
—
ns
tHCE_EBR
Clock Enable Hold Time to EBR Output
Register
-0.081
—
-0.090
—
-0.100
—
ns
tRSTO_EBR
Reset To Output Delay Time from EBR
Output Register
—
1.03
—
1.15
—
1.26
ns
tSUBE_EBR
Byte Enable Set-Up Time to EBR Output
Register
-0.115
—
-0.130
—
-0.145
—
ns
tHBE_EBR
Byte Enable Hold Time to EBR Output
Register
0.138
—
0.155
—
0.172
—
ns
Reset Recovery to Rising Clock
1.00
—
1.00
—
1.00
—
ns
Reset Recovery to Rising Clock
1.00
—
1.00
—
1.00
—
ns
GPLL Parameters
tRSTREC_GPLL
SPLL Parameters
tRSTREC_SPLL
DSP Block Timing2,3
tSUI_DSP
Input Register Setup Time
0.12
—
0.13
—
0.14
—
ns
tHI_DSP
Input Register Hold Time
0.02
—
-0.01
—
-0.03
—
ns
tSUP_DSP
Pipeline Register Setup Time
2.18
—
2.42
—
2.66
—
ns
ttHP_DSP
Pipeline Register Hold Time
-0.68
—
-0.77
—
-0.86
—
ns
tSUO_DSP
Output Register Setup Time
4.26
—
4.71
—
5.16
—
ns
tHO_DSP
Output Register Hold Time
-1.25
—
-1.40
—
-1.54
—
ns
tCOI_DSP
Input Register Clock to Output Time
—
3.92
—
4.30
—
4.68
ns
tCOP_DSP
Pipeline Register Clock to Output Time
—
1.87
—
1.98
—
2.08
ns
tCOO_DSP
Output Register Clock to Output Time
—
0.50
—
0.52
—
0.55
ns
tSUADDSUB
AddSub Input Register Setup Time
-0.24
—
-0.26
—
-0.28
—
ns
tHADDSUB
AddSub Input Register Hold Time
0.27
—
0.29
—
0.32
—
ns
1. Internal parameters are characterized but not tested on every device.
2. These parameters apply to LatticeECP devices only.
3. DSP Block is configured in Multiply Add/Sub 18x18 Mode.
Timing v.A 0.11
3-29
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Timing Diagrams
Figure 3-9. Read/Write Mode (Normal)
CLKA
CSA
WEA
A0
ADA
A1
A0
A1
A0
tSU tH
DIA
D0
D1
tCO_EBR
tCO_EBR
D0
DOA
tCO_EBR
D1
D0
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive edge of the clock.
Figure 3-10. Read/Write Mode with Input and Output Registers
CLKA
CSA
WEA
ADA
A0
tSU
DIA
A1
A0
A1
A0
tH
D0
D1
tCOO_EBR
DOA (Regs)
Mem(n) data from previous read
output is only updated during a read cycle
3-30
tCOO_EBR
D0
D1
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 3-11. Write Through (SP Read/Write on Port A, Input Registers Only)
CLKA
CSA
WEA
Three consecutive writes to A0
ADA
A0
tSU
DIA
A1
tH
D0
D2
D1
tACCESS
DOA
A0
Data from Prev Read
or Write
tACCESS
D0
D3
D4
tACCESS
D1
tACCESS
D2
D3
D4
Note: Input data and address are registered at the positive edge of the clock and output data appears after the positive edge of the clock.
3-31
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M Family Timing Adders1, 2, 3
Over Recommended Operating Conditions
Buffer Type
Description
-7
-6
-5
Units
LVDS
-0.04
-0.02
0.00
ns
BLVDS25
BLVDS
-0.04
-0.09
-0.15
ns
MLVDS
LVDS
-0.15
-0.15
-0.15
ns
RSDS
RSDS
-0.15
-0.15
-0.15
ns
LVPECL33
LVPECL
0.16
0.15
0.13
ns
HSTL18_I
HSTL_18 class I
0.01
-0.01
-0.04
ns
HSTL18_II
HSTL_18 class II
0.01
-0.01
-0.04
ns
HSTL18D_I
Differential HSTL 18 class I
0.01
-0.01
-0.04
ns
HSTL18D_II
Differential HSTL 18 class II
0.01
-0.01
-0.04
ns
HSTL15_I
HSTL_15 class I
0.01
-0.01
-0.04
ns
HSTL15D_I
Differential HSTL 15 class I
0.01
-0.01
-0.04
ns
SSTL33_I
SSTL_3 class I
-0.03
-0.07
-0.10
ns
SSTL33_II
SSTL_3 class II
-0.03
-0.07
-0.10
ns
SSTL33D_I
Differential SSTL_3 class I
-0.03
-0.07
-0.10
ns
SSTL33D_II
Differential SSTL_3 class II
-0.03
-0.07
-0.10
ns
SSTL25_I
SSTL_2 class I
-0.04
-0.07
-0.10
ns
SSTL25_II
SSTL_2 class II
-0.04
-0.07
-0.10
ns
SSTL25D_I
Differential SSTL_2 class I
-0.04
-0.07
-0.10
ns
SSTL25D_II
Differential SSTL_2 class II
-0.04
-0.07
-0.10
ns
SSTL18_I
SSTL_18 class I
-0.01
-0.04
-0.07
ns
SSTL18_II
SSTL_18 class II
-0.01
-0.04
-0.07
ns
SSTL18D_I
Differential SSTL_18 class I
-0.01
-0.04
-0.07
ns
SSTL18D_II
Differential SSTL_18 class II
-0.01
-0.04
-0.07
ns
LVTTL33
LVTTL
-0.16
-0.16
-0.16
ns
LVCMOS33
LVCMOS 3.3
-0.08
-0.12
-0.16
ns
LVCMOS25
LVCMOS 2.5
0.00
0.00
0.00
ns
LVCMOS18
LVCMOS 1.8
-0.16
-0.17
-0.17
ns
LVCMOS15
LVCMOS 1.5
-0.14
-0.14
-0.14
ns
LVCMOS12
LVCMOS 1.2
-0.04
-0.01
0.01
ns
PCI33
PCI
-0.08
-0.12
-0.16
ns
LVDS25E
LVDS 2.5 E4
0.25
0.19
0.13
ns
LVDS25
LVDS 2.5
0.10
0.13
0.17
ns
Input Adjusters
LVDS25
Output Adjusters
BLVDS25
BLVDS 2.5
0.00
-0.01
-0.03
ns
MLVDS
MLVDS 2.54
0.00
-0.01
-0.03
ns
RSDS
RSDS 2.54
0.25
0.19
0.13
ns
LVPECL33
LVPECL 3.34
-0.02
-0.04
-0.06
ns
HSTL18_I
HSTL_18 class I 8mA drive
-0.19
-0.22
-0.25
ns
HSTL18_II
HSTL_18 class II
-0.30
-0.34
-0.37
ns
HSTL18D_I
Differential HSTL 18 class I 8mA drive
-0.19
-0.22
-0.25
ns
HSTL18D_II
Differential HSTL 18 class II
-0.30
-0.34
-0.37
ns
3-32
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M Family Timing Adders1, 2, 3 (Continued)
Over Recommended Operating Conditions
Buffer Type
HSTL15_I
Description
HSTL_15 class I 4mA drive
-7
-6
-5
Units
-0.22
-0.25
-0.27
ns
HSTL15D_I
Differential HSTL 15 class I 4mA drive
-0.22
-0.25
-0.27
ns
SSTL33_I
SSTL_3 class I
-0.12
-0.15
-0.18
ns
SSTL33_II
SSTL_3 class II
-0.20
-0.23
-0.27
ns
SSTL33D_I
Differential SSTL_3 class I
-0.12
-0.15
-0.18
ns
SSTL33D_II
Differential SSTL_3 class II
-0.20
-0.23
-0.27
ns
SSTL25_I
SSTL_2 class I 8mA drive
-0.16
-0.19
-0.22
ns
SSTL25_II
SSTL_2 class II 16mA drive
-0.19
-0.22
-0.25
ns
SSTL25D_I
Differential SSTL_2 class I 8mA drive
-0.16
-0.19
-0.22
ns
SSTL25D_II
Differential SSTL_2 class II 16mA drive
-0.19
-0.22
-0.25
ns
SSTL18_I
SSTL_1.8 class I
-0.14
-0.17
-0.20
ns
SSTL18_II
SSTL_1.8 class II 8mA drive
-0.20
-0.23
-0.25
ns
SSTL18D_I
Differential SSTL_1.8 class I
-0.14
-0.17
-0.20
ns
SSTL18D_II
Differential SSTL_1.8 class II 8mA drive
-0.20
-0.23
-0.25
ns
LVTTL33_4mA
LVTTL 4mA drive
0.52
0.60
0.68
ns
LVTTL33_8mA
LVTTL 8mA drive
0.06
0.08
0.09
ns
LVTTL33_12mA
LVTTL 12mA drive
0.04
0.04
0.05
ns
LVTTL33_16mA
LVTTL 16mA drive
0.03
0.02
0.02
ns
LVTTL33_20mA
LVTTL 20mA drive
-0.09
-0.09
-0.10
ns
LVCMOS33_4mA
LVCMOS 3.3 4mA drive, fast slew rate
0.52
0.60
0.68
ns
LVCMOS33_8mA
LVCMOS 3.3 8mA drive, fast slew rate
0.06
0.08
0.09
ns
LVCMOS33_12mA
LVCMOS 3.3 12mA drive, fast slew rate
0.04
0.04
0.05
ns
LVCMOS33_16mA
LVCMOS 3.3 16mA drive, fast slew rate
0.03
0.02
0.02
ns
LVCMOS33_20mA
LVCMOS 3.3 20mA drive, fast slew rate
-0.09
-0.09
-0.10
ns
LVCMOS25_4mA
LVCMOS 2.5 4mA drive, fast slew rate
0.41
0.47
0.53
ns
LVCMOS25_8mA
LVCMOS 2.5 8mA drive, fast slew rate
0.01
0.01
0.00
ns
LVCMOS25_12mA
LVCMOS 2.5 12mA drive, fast slew rate
0.00
0.00
0.00
ns
LVCMOS25_16mA
LVCMOS 2.5 16mA drive, fast slew rate
0.04
0.04
0.04
ns
LVCMOS25_20mA
LVCMOS 2.5 20mA drive, fast slew rate
-0.09
-0.10
-0.11
ns
LVCMOS18_4mA
LVCMOS 1.8 4mA drive, fast slew rate
0.37
0.40
0.43
ns
LVCMOS18_8mA
LVCMOS 1.8 8mA drive, fast slew rate
0.10
0.12
0.13
ns
LVCMOS18_12mA
LVCMOS 1.8 12mA drive, fast slew rate
-0.02
-0.02
-0.02
ns
LVCMOS18_16mA
LVCMOS 1.8 16mA drive, fast slew rate
-0.02
-0.03
-0.03
ns
LVCMOS15_4mA
LVCMOS 1.5 4mA drive, fast slew rate
0.29
0.31
0.32
ns
LVCMOS15_8mA
LVCMOS 1.5 8mA drive, fast slew rate
0.05
0.05
0.06
ns
LVCMOS12_2mA
LVCMOS 1.2 2mA drive, fast slew rate
0.58
0.69
0.79
ns
LVCMOS12_6mA
LVCMOS 1.2 6mA drive, fast slew rate
0.13
0.19
0.26
ns
LVCMOS33_4mA
LVCMOS 3.3 4mA drive, slow slew rate
2.17
2.44
2.71
ns
LVCMOS33_8mA
LVCMOS 3.3 8mA drive, slow slew rate
2.50
2.67
2.83
ns
LVCMOS33_12mA
LVCMOS 3.3 12mA drive, slow slew rate
1.72
1.88
2.05
ns
LVCMOS33_16mA
LVCMOS 3.3 16mA drive, slow slew rate
1.64
1.63
1.62
ns
LVCMOS33_20mA
LVCMOS 3.3 20mA drive, slow slew rate
1.33
1.36
1.39
ns
3-33
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M Family Timing Adders1, 2, 3 (Continued)
Over Recommended Operating Conditions
-7
-6
-5
Units
LVCMOS25_4mA
Buffer Type
LVCMOS 2.5 4mA drive, slow slew rate
Description
2.18
2.26
2.33
ns
LVCMOS25_8mA
LVCMOS 2.5 8mA drive, slow slew rate
2.19
2.35
2.51
ns
LVCMOS25_12mA
LVCMOS 2.5 12mA drive, slow slew rate
1.50
1.66
1.82
ns
LVCMOS25_16mA
LVCMOS 2.5 16mA drive, slow slew rate
1.60
1.59
1.58
ns
LVCMOS25_20mA
LVCMOS 2.5 20mA drive, slow slew rate
1.43
1.39
1.34
ns
LVCMOS18_4mA
LVCMOS 1.8 4mA drive, slow slew rate
2.22
2.27
2.32
ns
LVCMOS18_8mA
LVCMOS 1.8 8mA drive, slow slew rate
1.93
2.08
2.23
ns
LVCMOS18_12mA
LVCMOS 1.8 12mA drive, slow slew rate
1.43
1.51
1.58
ns
LVCMOS18_16mA
LVCMOS 1.8 16mA drive, slow slew rate
1.47
1.46
1.45
ns
LVCMOS15_4mA
LVCMOS 1.5 4mA drive, slow slew rate
2.32
2.38
2.43
ns
LVCMOS15_8mA
LVCMOS 1.5 8mA drive, slow slew rate
1.84
1.98
2.12
ns
LVCMOS12_2mA
LVCMOS 1.2 2mA drive, slow slew rate
2.52
2.63
2.74
ns
LVCMOS12_6mA
LVCMOS 1.2 6mA drive, slow slew rate
1.69
1.83
1.96
ns
PCI33
PCI33
0.04
0.04
0.04
ns
1. Timing Adders are characterized but not tested on every device.
2. LVCMOS timing measured with the load specified in Switching Test Condition table.
3. All other standards tested according to the appropriate specifications.
4. These timing adders are measured with the recommended resistor values.
Timing v.A 0.11
3-34
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
sysCLOCK GPLL Timing
Over Recommended Operating Conditions
Parameter
Description
fIN
Input Clock Frequency (CLKI, CLKFB)
fOUT
Output Clock Frequency (CLKOP,
CLKOS)
fOUT2
K-Divider Output Frequency (CLKOK)
fVCO
PLL VCO Frequency
fPFD
Phase Detector Input Frequency
Conditions
Min.
Typ.
Max.
Units
20
—
420
MHz
With external capacitor
2
—
420
MHz
Without external capacitor
20
—
420
MHz
With external capacitor5
5
—
50
MHz
0.156
—
210
MHz
0.039
—
25
MHz
640
—
1280
MHz
20
—
420
MHz
With external capacitor
2
—
50
MHz
Default duty cycle selected3
45
50
55
%
—
—
±0.05
UI
fOUT ≥ 100 MHz
—
—
50 ≤ fOUT < 100 MHz
—
fOUT < 50 MHz
—
N/M = integer
—
Without external capacitor
5, 6
Without external capacitor
5
With external capacitor
Without external capacitor
5, 6
AC Characteristics
Output Clock Duty Cycle
tDT
tPH
4
tOPJIT
Output Phase Accuracy
1
Output Clock Period Jitter
tSK
Input Clock to Output Clock Skew
tW
Output Clock Pulse Width
±125
ps
0.025
UIPP
—
0.04
UIPP
—
±250
ps
At 90% or 10%
1
—
—
ns
Without external capacitor
—
—
150
µs
—
—
500
µs
85
130
360
ps
tLOCK2
PLL Lock-in Time
tPA
Programmable Delay Unit
tIPJIT
Input Clock Period Jitter
—
—
±200
ps
tFBKDLY
External Feedback Delay
—
—
10
ns
tHI
Input Clock High Time
90% to 90%
0.5
—
—
ns
tLO
Input Clock Low Time
10% to 10%
0.5
—
—
ns
15
—
—
ns
Without external capacitor
500
—
—
ns
With external capacitor5
20
—
—
µs
With external capacitor5
RST Pulse Width (RESETM/RESETK)
tRST
Reset Signal Pulse Width (CNTRST)
1. Jitter sample is taken over 10,000 samples of the primary PLL output with clean reference clock and no additional I/O pins toggling.
2. Output clock is valid after tLOCK for PLL reset and dynamic delay adjustment.
3. Using LVDS output buffers.
4. Relative to CLKOP.
5. Value of external capacitor: 5.6 nF ±20%, NPO dielectric, ceramic chip capacitor, 1206 or smaller package, connected to PLLCAP pin.
6. fOUT (max) = fIN * 10 for fIN < 5MHz.
Timing v.A 0.11
3-35
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
sysCLOCK SPLL Timing
Over Recommended Operating Conditions
Parameter
fIN
Description
Input Clock Frequency (CLKI, CLKFB)
fOUT
Output Clock Frequency (CLKOP, CLKOS)
fOUT2
K-Divider Output Frequency (CLKOK)
fVCO
PLL VCO Frequency
fPFD
Phase Detector Input Frequency
Conditions
Min.
Typ.
Max.
Units
33
—
420
MHz
With external capacitor
2
—
420
MHz
Without external capacitor
33
—
420
MHz
Without external capacitor
5, 6
5
5
—
50
MHz
0.258
—
210
MHz
0.039
—
25
MHz
640
—
1280
MHz
33
—
420
MHz
With external capacitor
2
—
50
MHz
Default Duty Cycle Selected3
45
50
55
%
—
—
±0.05
UI
With external capacitor
Without external capacitor
5
With external capacitor
Without external capacitor
6
AC Characteristics
Output Clock Duty Cycle
tDT
tPH
4
tOPJIT
Output Phase Accuracy
1
Output Clock Period Jitter
tSK
Input Clock to Output Clock Skew
tW
Output Clock Pulse Width
fOUT ≥ 100 MHz
—
—
±125
ps
50 ≤ fOUT < 100 MHz
—
—
0.025
UIPP
fOUT < 50 MHz
—
—
0.04
UIPP
Divider Ratio = Integer
—
—
±250
ps
At 90% or 10%
1
—
—
ns
Without external capacitor
—
—
150
µs
With external capacitor5
—
—
500
µs
—
—
±200
ps
tLOCK2
PLL Lock-in Time
tIPJIT
Input Clock Period Jitter
tFBKDLY
External Feedback Delay
—
—
10
ns
tHI
Input Clock High Time
90% to 90%
0.5
—
—
ns
tLO
Input Clock Low Time
10% to 10%
0.5
—
—
ns
15
—
—
ns
500
—
—
ns
20
—
—
µs
RST Pulse Width (RESETM/RESETK)
tRST
Reset Signal Pulse Width (CNTRST)
Without external capacitor
5
With external capacitor
1. Jitter sample is taken over 10,000 samples of the primary PLL output with clean reference clock and no additional I/O pins toggling.
2. Output clock is valid after tLOCK for PLL reset and dynamic delay adjustment.
3. Using LVDS output buffers.
4. Phase accuracy of CLKOS compared to CLKOP.
5. Value of external capacitor: 5.6 nF ±20%, NPO dielectric, ceramic chip capacitor, 1206 or smaller package, connected to PLLCAP pin.
6. fOUT (max) = fIN * 10 for fIN < 5MHz.
Timing v.A 0.11
3-36
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
DLL Timing
Over Recommended Operating Conditions
Parameter
Description
Min.
Typ.
Max.
Units
fREF
Input reference clock frequency (on-chip or off-chip)
100
—
500
MHz
fFB
Feedback clock frequency (on-chip or off-chip)
100
—
500
MHz
fCLKOP1
Output clock frequency, CLKOP
100
—
500
MHz
fCLKOS2
Output clock frequency, CLKOS
25
—
500
MHz
tPJIT
Output clock period jitter (clean input)
—
250
ps p-p
tCYJIT
Output clock cycle to cycle jitter (clean input)
250
ps p-p
tDUTY
Output clock duty cycle (at 50% levels, 50% duty cycle input clock,
50% duty cycle circuit turned off, time reference delay mode)
35
65
%
tDUTYTRD
Output clock duty cycle (at 50% levels, arbitrary duty cycle input
clock, 50% duty cycle circuit enabled, time reference delay mode)
40
60
%
tDUTYCIR
Output clock duty cycle (at 50% levels, arbitrary duty cycle input
clock, 50% duty cycle circuit enabled, clock injection removal
mode)
40
60
%
tSKEW3
Output clock to clock skew between two outputs with the same
phase setting
—
—
100
ps
tPWH
Input clock minimum pulse width high (at 80% level)
750
—
—
ps
tPWL
Input clock minimum pulse width low (at 20% level)
750
—
—
ps
tR, tF
Input clock rise and fall time (20% to 80% levels)
—
—
1
ns
tINSTB
Input clock period jitter
—
—
+/-250
ps
tLOCK
DLL lock time
18,500
—
—
cycles
tRSWD
Digital reset minimum pulse width (at 80% level)
tPA
Delay step size
tRANGE1
Max. delay setting for single delay block (144 taps)
2.376
6
8.553
ns
tRANGE4
Max. delay setting for four chained delay blocks
9.504
24
34.214
ns
3
—
—
ns
16.5
42
59.4
ps
1. CLKOP runs at the same frequency as the input clock.
2. CLKOS minimum frequency is obtained with divide by 4.
3. This is intended to be a “path-matching” design guideline and is not a measurable specification.
Timing v.A 0.11
3-37
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
SERDES High Speed Data Transmitter (LatticeECP2M Family Only)1, 2
Table 3-7. Serial Output Timing and Levels
Symbol
Description
VTX-DIFF-P-P-1.25 Differential swing (1.25V setting)1, 2
Frequency
Min.
Typ.
Max.
Units
0.25 to 3.125 Gbps
—
1.25
—
V, p-p
VTX-DIFF-P-P-1.4
Differential swing (1.4V setting)1, 2
0.25 to 3.125 Gbps
—
1.4
—
V, p-p
VTX-DIFF-P-P-1.0
Differential swing (1.0V setting)1, 2
0.25 to 3.125 Gbps
—
1.0
—
V, p-p
VTX-DIFF-P-P-1.2
1, 2
Differential swing (1.2V setting)
0.25 to 3.125 Gbps
—
1.2
—
V, p-p
VOCM
Output common mode voltage
—
—
0.8
—
V
TTX-R
Rise time (20% to 80%)
—
—
70
—
ps
TTX-F
Fall time (80% to 20%)
—
—
70
—
ps
—
Ohms
—
dB
ZTX-OI-SE
Output Impedance 50/75/HiZ K Ohms
(single ended)
—
—
50/75
HiZ
RLTX-RL
Return loss (with package)
—
—
9
1. All measurements are with 50 ohm impedance.
2. See technical note TN1124, LatticeECP2/M SERDES/PCS Usage Guide for actual binary settings and the min-max range.
Table 3-8. Channel Output Jitter
Description
Frequency
Min.
Typ.
Max.
Units
Deterministic
3.125 Gbps
—
0.08
0.12
UI, p-p
Random
3.125 Gbps
—
0.22
0.38
UI, p-p
Total
3.125 Gbps
—
0.33
0.43
UI, p-p
Deterministic
2.5Gbps
—
0.05
0.11
UI, p-p
Random
2.5Gbps
—
0.17
0.30
UI, p-p
Total
2.5Gbps
—
0.24
0.39
UI, p-p
Deterministic
1.25 Gbps
—
0.03
0.11
UI, p-p
Random
1.25 Gbps
—
0.10
0.18
UI, p-p
Total
1.25 Gbps
—
0.15
0.29
UI, p-p
Deterministic
250 Mbps
—
0.04
0.17
UI, p-p
Random
250 Mbps
—
0.12
0.13
UI, p-p
Total
250 Mbps
—
0.15
0.29
UI, p-p
Note: Values are measured with PRBS 27-1, all channels operating, FPGA Logic active, I/Os around SERDES pins quiet, reference clock @
10X mode.
3-38
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Table 3-9. SERDES/PCS Latency Breakdown (Parallel Clock Cycle)
Item
Description
Min.
Average
Max.
Bypass
Transmit Data Latency
T1
FPGA Bridge Transmit2
1
3
5
1
T2
8b10b Encoder
2
2
2
1
T3
SERDES Bridge Transmit
2
2
2
1
T4
Serializer3
2.4
Receive Data Latency
R1
Deserializer3
R2
SERDES Bridge Receive
2
2
2
1
R3
Word Alignment
4
4
4
0
R4
8b10b Decoder
1
1
1
1
R5
Clock Tolerance Compensation
7
15
23
1
1
3
5
1
1.2
2
R6
FPGA Bridge Receive
1. PCS internal Parallel Clock. This clock rate is same as the rxfullclk in table 8-6.
2. FPGA Bridge latency varies by UP/DOWN Sample FIFO read/write. These numbers were presented for
8bit/10bit interface. The depth of Down Sample/Up Sample FIFO is 4. The earliest read can be done after
write clock cycle (1 clock) in Down Sample FIFO. The latest read will be done after the FIFO is full (4 + 1
= 5). For 16b/20b interface, the numbers become doubled. Min = 2, Max = 10. This latency depends on
the internal FIFO flag operation.
3. The maximum latency applies to bit0.
Bit1 latency = Bit0 latency + 1 UI.
Bit2 latency = Bit0 latency + 2 UI.
Figure 3-12. Transmitter and Receiver Block Diagram
SERDES
SERDES Bridge
PCS
R1
EQ
Deserializer
1:8/1:10
CDR
HDINNi
DEC
Polarity
Adjust
BYPASS
R5
Elastic
Buffer
FIFO
BYPASS
R6
Down
Sample
FIFO
Receive Data
BYPASS
BYPASS
Receiver
REFCLK
R4
R3
R2
FPGA Core
FPGA
EBRD Clock
WA
HDINPi
FPGA Bridge
Recovered Clock
REFCLK
FPGA
Receive Clock
Transmit Clock
TX PLL
T2
T1
T3
T4
HDOUTPi
Serializer
8:1/10:1
HDOUTNi
Transmitter
Encoder
Polarity
Adjust
Up
Sample
FIFO
Transmit Data
BYPASS
BYPASS
BYPASS
FPGA
Transmit Clock
3-39
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
SERDES High Speed Data Receiver (LatticeECP2M Family Only)
Table 3-10. Serial Input Data Specifications
Symbol
Description
Min.
1
Typ.
Max.
Units
RX-CIDS
Stream of nontransitions
(CID = Consecutive Identical Digits) @ 10-12 BER
VRX-DIFF-S
Differential input sensitivity
VRX-IN
Input levels
VRX-CM-DC
Input common mode range (DC coupled)
0.5
—
1.2
V
VRX-CM-AC
Input common mode range (AC coupled)3
0
—
1.5
V
3000
7 @ 3.125 Gbps
20 @ 1.25 Gbps
TRX-RELOCK CDR re-lock time2
Bits
100
—
—
mV, p-p
0
—
VCCRX + 0.8
V
—
—
ZRX-TERM
Input termination 50/75 Ohm/High Z
—
50
RLRX-RL
Return loss (without package)
—
9
Bits
Ohms
—
dB
1. This is the number of bits allowed without a transition on the incoming data stream when using DC coupling.
2. This is the typical number of bit times to re-lock to a new phase or frequency within +/- 300 ppm, assuming 8b10b encoded data.
3. AC coupling is used to interface to LVPECL and LVDS.
Input Data Jitter Tolerance
A receiver’s ability to tolerate incoming signal jitter is very dependent on jitter type. High speed serial interface standards have recognized the dependency on jitter type and have recently modified specifications to indicate tolerance levels for different jitter types as they relate to specific protocols (e.g. FC, etc.). Sinusoidal jitter is considered
to be a worst case jitter type.
Table 3-11. Receiver Total Jitter Tolerance Specification1
Description
Frequency
Min.
Typ.
Max.
Units
600 mV differential eye
—
—
0.54
UI, p-p
3.125 Gbps 600 mV differential eye
—
—
0.26
UI, p-p
600 mV differential eye
—
—
0.80
UI, p-p
600 mV differential eye
—
—
0.61
UI, p-p
600 mV differential eye
—
—
0.22
UI, p-p
Deterministic
Random
Total
Deterministic
Random
2.5 Gbps
Condition
Total
600 mV differential eye
—
—
0.81
UI, p-p
Deterministic
600 mV differential eye
—
—
0.53
UI, p-p
600 mV differential eye
—
—
0.22
UI, p-p
600 mV differential eye
—
—
0.80
UI, p-p
600 mV differential eye
—
—
0.42
UI, p-p
600 mV differential eye
—
—
0.10
UI, p-p
600 mV differential eye
—
—
0.60
UI, p-p
Random
1.25 Gbps
Total
Deterministic
Random
250 Mbps2
Total
1. Values are measured with PRBS 27-1, all channels operating, FPGA Logic active, I/Os around SERDES pins quiet, voltages are nominal,
room temperature.
2. Jitter specification is limited by measurement equipment capability.
Table 3-12. Periodic Receiver Jitter Tolerance Specification1
Description
Periodic
Frequency
Condition
Min.
Typ.
Max.
Units
3.125 Gbps 600 mV differential eye
—
—
0.20
UI, p-p
2.5 Gbps
—
—
0.22
UI, p-p
600 mV differential eye
1.25 Gbps
600 mV differential eye
—
—
0.20
UI, p-p
250 Mbps2
600 mV differential eye
—
—
0.08
UI, p-p
1. Values are measured with PRBS 27-1, all channels operating.
2. Jitter specification is limited by measurement equipment capability.
3-40
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
SERDES External Reference Clock (LatticeECP2M Family Only)
The external reference clock selection and its interface are a critical part of system applications for this product.
Table 3-13 specifies reference clock requirements, over the full range of operating conditions.
Table 3-13. External Reference Clock Specification (refclkp/refclkn)
Symbol
Description
Min.
Typ.
Max.
Units
25
—
320
MHz
FREF
Frequency range
FREF-PPM
Frequency tolerance
-300
—
300
ppm
VREF-IN-SE
Input swing, single-ended clock1
100
—
1200
mV, p-p
VREF-IN
Input levels
VREF-CM-DC
Input common mode range (DC coupled)
0
—
VCCP + 0.8
V
0.5
—
1.2
V
2
VREF-CM-AC
Input common mode range (AC coupled)
0
—
1.5
V
DREF
Duty cycle3
40
—
60
%
TREF-R
Rise time (20% to 80%)
500
1000
ps
TREF-F
Fall time (80% to 20%)
500
1000
ps
ZREF-IN-TERM
Input termination
CREF-IN-CAP
Input capacitance4
50/2K
—
—
Ohms
1.5
pF
1. The signal swing for a single-ended input clock must be as large as the p-p differential swing of a differential input clock to get the same
gain at the input receiver. Lower swings for the clock may be possible, but will tend to increase jitter.
2. When AC coupled, the input common mode range is determined by:
(Min input level) + (Peak-to-peak input swing)/2 ≤ (Input common mode voltage) ≤ (Max input level) - (Peak-to-peak input swing)/2
3. Measured at 50% amplitude.
4. Input capacitance of 1.5pF is total capacitance, including both device and package.
Figure 3-13. Jitter Transfer
5.00
0.00
Jitter T.
Gain@25°C,1.20V,
PJ=100ps
dB
-5.00
-10.00
-15.00
-20.00
-25.00
0.1
1
10
100
Frequency (MHz)
Note: This graph is for a nominal device.
SERDES Power-Down/Power-Up Specification
Table 3-14. Power-Down and Power-Up Specification
Symbol
Description
Max.
Units
tPWRDN
Power-down time after all power down register bits set to ‘0’
10
s
tPWRUP
Power-up time after all power down register bits set to ‘1’
5
ms
3-41
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
PCI Express Electrical and Timing Characteristics
AC and DC Characteristics
Table 3-15. Transmit1, 2
Symbol
Description
Min
Typ
Max
Units
399.88
400
400.12
ps
Differential peak-to-peak output
voltage
0.8
1.0
1.2
V
VTX-DE-RATIO
De-emphasis differential output
voltage ratio
0
-3.5
-7.96
dB
VTX-CM-AC_P
RMS AC peak common-mode output voltage
—
20
—
mV
VTX-CM-DC-LINE-DELTA
Maximum Common mode voltage
delta between n and p channels
—
—
25
mV
VTX-DC-CM
Tx DC common mode voltage
0
—
VCCOB +
5%
V
ITX-SHORT
Output short circuit current
VTX-D+=0.0V
VTX-D-=0.0V
—
—
90
mA
UI
Unit interval
VTX-DIFF_P-P
Test Conditions
ZTX-DIFF-DC
Differential output impedance
80
100
120
Ohms
TTX-RISE
Tx output rise time
20 to 80%
0.125
—
—
UI
TTX-FALL
Tx output fall time
20 to 80%
0.125
—
—
UI
LTX-SKEW
Lane-to-lane static output skew for
all lanes in port/link
—
—
1.3
ns
Transmitter eye width
0.75
—
—
UI
—
—
0.125
UI
AC coupling capacitor
75
—
200
nF
TTX-EYE
TTX-EYE-MEDIAN-TO-MAX-JITTER
3
CTX
1. Values are measured at 2.5 Gbps.
2. Compliant to PCI Express v1.1.
3. Measured at 60ps with plug-in board and jitter due to socket removed.
Table 3-16. Receive
Min.
Typ.
Max.
Units
UI
Symbol
Unit Interval
Description
Test Conditions
399.88
400
400.12
ps
VRX-DIFF_P-P
Differential peak-to-peak input
voltage
0.175
—
—
V
VRX-IDLE-DET-DIFF_P-P
Idle detect threshold voltage
65
—
175
mV
ZRX-DIFF-DC
DC differential input impedance
80
100
120
Ohms
ZRX-DC
DC input impedance
40
50
60
Ohms
ZRX-HIGH-IMP-DC1
Power-down DC input impedance
200K
—
—
Ohms
TRX-EYE
Receiver eye width
TRX-EYE-MEDIAN-TO-MAX-JITTER
Notes:
1. Measured with external AC-coupling on the receiver
2. Values are measured at 2.5 Gbps
3-42
0.4
—
—
UI
—
—
0.3
UI
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Table 3-17. Reference Clock
Symbol
Description
Test Conditions
Min.
Typ.
Max.
Units
FREFCLK
Reference clock frequency
—
100
—
MHz
VCM
Input common mode voltage
—
0.65
—
V
TR/TF
Clock input rise/fall time
—
—
1.0
ns
VSW
Differential input voltage swing
0.6
—
1.6
V
DCREFCLK
Input clock duty cycle
40
50
60
%
PPM
Reference clock tolerance
-300
—
+300
ppm
3-43
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M sysCONFIG Port Timing Specifications
Over Recommended Operating Conditions
Parameter
Description
Min.
Max.
Units
7
—
ns
1
—
ns
—
12
ns
sysCONFIG Byte Data Flow
tSUCBDI
Byte D[0:7] Setup Time to CCLK
tHCBDI
Byte D[0:7] Hold Time to CCLK
tCODO
CCLK to DOUT in Flowthrough Mode
tSUCS
CSN[0:1] Setup Time to CCLK
7
—
ns
tHCS
CSN[0:1] Hold Time to CCLK
1
—
ns
tSUWD
Write Signal Setup Time to CCLK
7
—
ns
tHWD
Write Signal Hold Time to CCLK
1
—
ns
tDCB
CCLK to BUSY Delay Time
—
12
ns
tCORD
CCLK to Out for Read Data
—
12
ns
6
—
ns
sysCONFIG Byte Slave Clocking
tBSCH
Byte Slave CCLK Minimum High Pulse
tBSCL
Byte Slave CCLK Minimum Low Pulse
9
—
ns
tBSCYC
Byte Slave CCLK Cycle Time
15
—
ns
7
—
ns
sysCONFIG Serial (Bit) Data Flow
tSUSCDI
DI Setup Time to CCLK Slave Mode
tHSCDI
DI Hold Time to CCLK Slave Mode
tCODO
CCLK to DOUT in Flowthrough Mode
1
—
ns
—
12
ns
sysCONFIG Serial Slave Clocking
tSSCH
Serial Slave CCLK Minimum High Pulse
6
—
ns
tSSCL
Serial Slave CCLK Minimum Low Pulse
6
—
ns
sysCONFIG POR, Initialization and Wake-up
tICFG
Minimum Vcc to INITN High
—
28
ms
tVMC
Time from tICFG to Valid Master CCLK
—
2
us
tPRGMRJ
PROGRAMN Pin Pulse Rejection
—
8
ns
tPRGM
PROGRAMN Low Time to Start Configuration
25
—
ns
tDINIT
PROGRAMN High to INITN High Delay
—
1
ms
tDPPINIT
Delay Time from PROGRAMN Low to INITN Low
—
37
ns
tDPPDONE
Delay Time from PROGRAMN Low to DONE Low
—
37
ns
tIODISS
User I/O Disable from PROGRAMN Low
—
35
ns
tIOENSS
User I/O Enabled Time from CCLK Edge During Wake-up Sequence
—
25
ns
tMWC
Additional Wake Master Clock Signals after DONE Pin High
120
—
cycles
1
µs
sysCONFIG SPI Port
tCFGX
INITN High to CCLK Low
—
tCSSPI
INITN High to CSSPIN Low
—
2
us
tCSCCLK
CCLK Low before CSSPIN Low
0
—
ns
tSOCDO
CCLK Low to Output Valid
—
15
ns
tSOE
CSSPIN[0:1] Active Setup Time
300
—
ns
tCSPID
CSSPIN[0:1] Low to First CCLK Edge Setup Time
300+3cyc
600+6cyc
ns
fMAXSPI
Max. CCLK Frequency - SPI Flash Read Opcode (0x03)
(SPIFASTN = 1)
—
20
MHz
Max. CCLK Frequency - SPI Flash Fast Read Opcode (0x0B)
(SPIFASTN = 0)
—
50
MHz
3-44
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2/M sysCONFIG Port Timing Specifications (Continued)
Over Recommended Operating Conditions
Min.
Max.
Units
tSUSPI
Parameter
SOSPI Data Setup Time Before CCLK
Description
7
—
ns
tHSPI
SOSPI Data Hold Time After CCLK
2
—
ns
Timing v.A 0.11
Parameter
Master Clock Frequency
Min.
Max.
Units
Selected value - 30%
Selected value + 30%
MHz
40
60
%
Duty Cycle
Timing v.A 0.11
Figure 3-14. sysCONFIG Parallel Port Read Cycle
tBSCL
tBSCYC
tBSCH
CCLK
t SUCS
tHCS
tSUWD
t HWD
CS1N
CSN
WRITEN
tDCB
BUSY
t CORD
D[0:7]
Byte 0
Byte 1
Byte 2
Byte n*
*n = last byte of read cycle.
Figure 3-15. sysCONFIG Parallel Port Write Cycle
tBSCL
tBSCH
CCLK
t SUCS
tHCS
CS1N
CSN
t SUWD
t HWD
WRITEN
tDCB
BUSY
t HCBDI
tSUCBDI
D[0:7]
Byte 0
Byte 1
*n = last byte of write cycle.
3-45
Byte 2
Byte n*
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 3-16. sysCONFIG Slave Serial Port Timing
tSSCL
tSSCH
CCLK (input)
tHSCDI
t SUSCDI
DIN
t CODO
DOUT
Figure 3-17. Power-On-Reset (POR) Timing
VCC / VCCAUX /
VCCIO81
tICFG
INITN
DONE
t VMC
CCLK 2
CFG[2:0] 3
Valid
1. Time taken from VCC, VCCAUX or VCCIO8, whichever is the last to cross the POR trip point.
2. Device is in a Master Mode (SPI, SPIm).
3. The CFG pins are normally static (hard wired).
Figure 3-18. Configuration from PROGRAMN Timing
tPRGMRJ
PROGRAMN
t DINIT
INITN
tDPPINIT
DONE
t DINITD
CCLK
CFG[2:0] 1
Valid
t IODISS
USER I/O
1. The CFG pins are normally static (hard wired)
3-46
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Figure 3-19. Wake-Up Timing
PROGRAMN
INITN
DONE
Wake-Up
tMWC
CCLK
tIOENSS
USER I/O
Figure 3-20. SPI/SPIm Configuration Waveforms
Capture CR0 & CIB
Capture CFGx and SPIFASTN
VCC
PROGRAMN
DONE
INITN
SPIFASTN
CSSPI0N
CSSPI1N
0
1
2
3
…
7
8
9 10
… 31 32 33 34
… 127 128
CCLK
SISPI/BUSY
Opcode
Address
Ignore
SPID0
3-47
Valid Bitstream
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
JTAG Port Timing Specifications
Over Recommended Operating Conditions
Symbol
Parameter
Min
Max
Units
fMAX
TCK clock frequency
—
25
MHz
tBTCP
TCK [BSCAN] clock pulse width
40
—
ns
tBTCPH
TCK [BSCAN] clock pulse width high
20
—
ns
tBTCPL
TCK [BSCAN] clock pulse width low
20
—
ns
tBTS
TCK [BSCAN] setup time
8
—
ns
tBTH
TCK [BSCAN] hold time
10
—
ns
tBTRF
TCK [BSCAN] rise/fall time
50
—
mV/ns
tBTCO
TAP controller falling edge of clock to valid output
—
10
ns
tBTCODIS
TAP controller falling edge of clock to valid disable
—
10
ns
tBTCOEN
TAP controller falling edge of clock to valid enable
—
10
ns
tBTCRS
BSCAN test capture register setup time
8
—
ns
tBTCRH
BSCAN test capture register hold time
25
—
ns
tBUTCO
BSCAN test update register, falling edge of clock to valid output
—
25
ns
tBTUODIS
BSCAN test update register, falling edge of clock to valid disable
—
25
ns
tBTUPOEN
BSCAN test update register, falling edge of clock to valid enable
—
25
ns
Timing v.A 0.11
Figure 3-21. JTAG Port Timing Waveforms
TMS
TDI
tBTS
tBTCPH
tBTH
tBTCP
tBTCPL
TCK
tBTCO
tBTCOEN
TDO
Valid Data
tBTCRS
Data to be
captured
from I/O
tBTCODIS
Valid Data
tBTCRH
Data Captured
tBTUPOEN
tBUTCO
Data to be
driven out
to I/O
Valid Data
3-48
tBTUODIS
Valid Data
DC and Switching Characteristics
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Switching Test Conditions
Figure 3-23 shows the output test load that is used for AC testing. The specific values for resistance, capacitance,
voltage, and other test conditions are shown in Table 3-18.
Figure 3-22. Output Test Load, LVTTL and LVCMOS Standards
VT
R1
DUT
Test Poi nt
R2
CL*
*CL Includes Test Fixture and Probe Capacitance
Table 3-18. Test Fixture Required Components, Non-Terminated Interfaces
Test Condition
LVTTL and other LVCMOS settings (L -> H, H -> L)
R1
∞
R2
∞
CL
0pF
Timing Ref.
VT
LVCMOS 3.3 = 1.5V
—
LVCMOS 2.5 = VCCIO/2
—
LVCMOS 1.8 = VCCIO/2
—
LVCMOS 1.5 = VCCIO/2
—
LVCMOS 1.2 = VCCIO/2
—
1MΩ
VCCIO/2
—
1MΩ
∞
VCCIO/2
VCCIO
∞
100
VOH - 0.10
—
100
∞
VOL + 0.10
VCCIO
LVCMOS 2.5 I/O (Z -> H)
∞
LVCMOS 2.5 I/O (Z -> L)
LVCMOS 2.5 I/O (H -> Z)
LVCMOS 2.5 I/O (L -> Z)
Note: Output test conditions for all other interfaces are determined by the respective standards.
3-49
LatticeECP2/M Family Data Sheet
Pinout Information
August 2008
Data Sheet DS1006
Signal Descriptions
Signal Name
I/O
Description
General Purpose
[Edge] indicates the edge of the device on which the pad is located. Valid
edge designations are L (Left), B (Bottom), R (Right), T (Top).
[Row/Column Number] indicates the PFU row or the column of the device on
which the PIC exists. When Edge is T (Top) or B (Bottom), only need to specify Row Number. When Edge is L (Left) or R (Right), only need to specify Column Number.
P[Edge] [Row/Column Number*]_[A/B]
I/O
[A/B] indicates the PIO within the PIC to which the pad is connected. Some of
these user-programmable pins are shared with special function pins. These
pins, when not used as special purpose pins, can be programmed as I/Os for
user logic. During configuration the user-programmable I/Os are tri-stated
with an internal pull-up resistor enabled. If any pin is not used (or not bonded
to a package pin), it is also tri-stated with an internal pull-up resistor enabled
after configuration.
GSRN
I
Global RESET signal (active low). Any I/O pin can be GSRN.
NC
—
No connect.
GND
—
Ground. Dedicated pins.
VCC
—
Power supply pins for core logic. Dedicated pins.
VCCAUX
—
Auxiliary power supply pin. This dedicated pin powers all the differential and
referenced input buffers.
VCCIOx
—
Dedicated power supply pins for I/O bank x.
VCCPLL
—
PLL supply pins. Should be tied to VCC even when the corresponding PLL is
unused.
VREF1_x, VREF2_x
—
Reference supply pins for I/O bank x. Pre-determined pins in each bank are
assigned as VREF inputs. When not used, they may be used as I/O pins.
XRES4
—
10K ohm +/-1% resistor must be connected between this pad and ground.
PLLCAP4
—
External capacitor connection for PLL.
PLL, DLL and Clock Functions (Used as user programmable I/O pins when not in use for PLL or clock pins)
[LOC][num]_VCCPLL
—
Power supply pin for PLL: ULM, LLM, URM, LRM, num = row from center.
[LOC][num]_GPLL[T, C]_IN_A
I
General Purpose PLL (GPLL) input pads: ULM, LLM, URM, LRM, num = row
from center, T = true and C = complement, index A,B,C...at each side.
[LOC][num]_GPLL[T, C]_FB_A
I
Optional feedback GPLL input pads: ULM, LLM, URM, LRM, num = row from
center, T = true and C = complement, index A,B,C...at each side.
[LOC][num]_SPLL[T, C]_IN_A
I
Secondary PLL (SPLL) input pads: ULM, LLM, URM, LRM, num = row from
center, T = true and C = complement, index A,B,C...at each side.
[LOC][num]_SPLL[T, C]_FB_A
I
Optional feedback (SPLL) input pads: ULM, LLM, URM, LRM, num = row
from center, T = true and C = complement, index A,B,C...at each side.
[LOC][num]_DLL[T, C]_IN_A
I
DLL input pads: ULM, LLM, URM, LRM, num = row from center, T = true and
C = complement, index A,B,C...at each side.
[LOC][num]_DLL[T, C]_FB_A
I
Optional feedback (DLL) input pads: ULM, LLM, URM, LRM, num = row from
center, T = true and C = complement, index A,B,C...at each side.
PCLK[T, C]_[n:0]_[3:0]
I
Primary Clock pads, T = true and C = complement, n per side, indexed by
bank and 0,1,2,3 within bank.
© 2008 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
4-1
DS1006 Pinout Information_01.9
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Signal Descriptions (Cont.)
Signal Name
I/O
Description
[LOC]DQS[num]
I/O
DQ input/output pads: T (top), R (right), B (bottom), L (left), DQS, num = ball
function number.
[LOC]DQ[num]
I/O
DQ input/output pads: T (top), R (right), B (bottom), L (left), DQ, associated
DQS number.
Test and Programming (Dedicated Pins)
TMS
I
Test Mode Select input, used to control the 1149.1 state machine. Pull-up is
enabled during configuration.
TCK
I
Test Clock input pin, used to clock the 1149.1 state machine. No pull-up
enabled.
I
Test Data in pin. Used to load data into device using 1149.1 state machine.
After power-up, this TAP port can be activated for configuration by sending
appropriate command. (Note: once a configuration port is selected it is
locked. Another configuration port cannot be selected until the power-up
sequence). Pull-up is enabled during configuration.
TDI
TDO
O
Output pin. Test Data Out pin used to shift data out of a device using 1149.1.
VCCJ
—
Power supply pin for JTAG Test Access Port.
Configuration Pads (Used During sysCONFIG)
CFG[2:0]
INITN
I
Mode pins used to specify configuration mode values latched on rising edge
of INITN. During configuration, a pull-up is enabled. These are dedicated
pins.
I/O
Open Drain pin. Indicates the FPGA is ready to be configured. During configuration, a pull-up is enabled. It is a dedicated pin.
I
Initiates configuration sequence when asserted low. This pin always has an
active pull-up. This is a dedicated pin.
DONE
I/O
Open Drain pin. Indicates that the configuration sequence is complete, and
the startup sequence is in progress. This is a dedicated pin.
CCLK
I/O
Configuration Clock for configuring an FPGA in sysCONFIG mode.
BUSY/SISPI
I/O
Read control command in SPI or SPIm mode.
PROGRAMN
CSN
I
sysCONFIG chip select (active low). During configuration, a pull-up is
enabled.
CS1N
I
sysCONFIG chip select (active low). During configuration, a pull-up is
enabled.
WRITEN
I
Write Data on Parallel port (active low).
sysCONFIG Port Data I/O for Parallel mode.
D[0]/SPIFASTN
I/O
sysCONFIG Port Data I/O for SPI or SPIm. When using the SPI or SPIm
mode, this pin should either be tied high or low, must not be left floating.
D[1:6]
I/O
sysCONFIG Port Data I/O for Parallel
D[7]/SPID0
I/O
sysCONFIG Port Data I/O for Parallel, SPI, SPIm
DOUT/CSON
O
Output for serial configuration data (rising edge of CCLK) when using
sysCONFIG port.
DI/CSSPI0N
I/O
Input for serial configuration data (clocked with CCLK) when using sysCONFIG port. During configuration, a pull-up is enabled. Output when used in SPI/
SPIm modes.
[LOC]_SQ_VCCAUX33
—
Termination resistor switching power (3.3V). This pin must be tied to 3.3V
even if the quad is unused.
[LOC]_SQ_REFCLKN
I
[LOC]_SQ_REFCLKP
I
Dedicated SERDES Signals1, 2, 3
[LOC]_SQ_VCCP
—
Negative Reference Clock Input
Positive Reference Clock Input
PLL and Reference clock buffer power (1.2V). This pin must be tied to 1.2V
even if the quad is unused.
4-2
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Signal Descriptions (Cont.)
Signal Name
I/O
Description
[LOC]_SQ_VCCIBm
—
Input buffer power supply, channel m (1.2V/1.5V). This pin should be left floating if the channel is unused.
[LOC]_SQ_VCCOBm
—
Output buffer power supply, channel m (1.2V/1.5V). This pin should be left
floating if the channel is unused.
[LOC]_SQ_HDOUTNm
O
High-speed output, negative channel m
[LOC]_SQ_HDOUTPm
O
High-speed output, positive channel m
[LOC]_SQ_HDINNm
I
High-speed input, negative channel m
[LOC]_SQ_HDINPm
I
High-speed input, positive channel m
[LOC]_SQ_VCCTXm4
—
Transmitter power supply, channel m (1.2V). This pin must be tied to 1.2V
even if the channel is unused.
[LOC]_SQ_VCCRXm4
—
Receiver power supply, channel m (1.2V). This pin must be tied to 1.2V even if
the channel is unused.
1. These signals are relevant for LatticeECP2M family.
2. m defines the associated channel in the Quad.
3. These signals are defined in Quads [LOC] indicates the corner SERDES Quad is located: ULC (upper left), URC (upper right), LLC (lower
left), LRC (lower right).
4. When placing switching I/Os around these critical pins that are designed to supply the device with the proper reference or supply voltage,
care must be given. For more information, refer to technical note TN1159, LatticeECP2/M Pin Assignment Recommendations.
4-3
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
PICs and DDR Data (DQ) Pins Associated with the DDR Strobe (DQS) Pin
PICs Associated with
DQS Strobe
PIO Within PIC
DDR Strobe (DQS) and
Data (DQ) Pins
For Left and Right Edges of the Device
P[Edge] [n-4]
P[Edge] [n-3]
P[Edge] [n-2]
P[Edge] [n-1]
P[Edge] [n]
P[Edge] [n+1]
P[Edge] [n+2]
P[Edge] [n+3]
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
[Edge]DQSn
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
[Edge]DQSn
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
A
DQ
B
DQ
For Bottom Edge of the Device
P[Edge] [n-4]
P[Edge] [n-3]
P[Edge] [n-2]
P[Edge] [n-1]
P[Edge] [n]
P[Edge] [n+1]
P[Edge] [n+2]
P[Edge] [n+3]
P[Edge] [n+4]
Notes:
1. “n” is a row PIC number.
2. The DDR interface is designed for memories that support one DQS strobe up to 15 bits
of data for the left and right edges and up to 17 bits of data for the bottom edge. In some
packages, all the potential DDR data (DQ) pins may not be available. PIC numbering
definitions are provided in the “Signal Names” column of the Signal Descriptions table.
4-4
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Pin Information Summary, LFE2-6 and LFE2-12
LFE2-6
LFE2-12
144
TQFP
256
fpBGA
144
TQFP
208
PQFP
256
fpBGA
484
fpBGA
Single Ended User I/O
90
190
93
131
193
297
Differential Pair User I/O
43
95
45
62
96
148
Pin Type
Configuration
Non Configuration
TAP Pins
5
5
5
5
5
5
Muxed Pins
14
14
14
14
14
14
Dedicated Pins (Non TAP)
7
7
7
7
7
7
Muxed Pins
34
54
33
40
54
57
3
3
3
3
3
3
VCC
10
7
10
14
7
16
VCCAUX
4
4
4
8
4
16
VCCPLL
0
0
0
0
0
0
Bank0
1
2
1
2
2
4
Bank1
1
2
1
2
2
4
Bank2
1
2
1
2
2
4
Bank3
1
2
1
2
2
4
Bank4
1
2
1
2
2
4
Bank5
1
2
1
2
2
4
Bank6
1
2
1
2
2
4
Bank7
1
2
1
2
2
4
VCCIO
Dedicated Pins
Bank8
GND, GND0 to GND7
NC
Single Ended/ Differential I/O
Pairs per Bank (including
emulated with resistors)
True LVDS I/O Pairs per Bank
1
1
1
2
1
2
12
20
12
22
20
60
4
3
1
0
0
44
Bank0
8/4
18/6
8/4
18/9
18/9
50/25
Bank1
17/8
34/17
18/9
18/9
34/17
46/23
Bank2
4/2
20/10
4/2
11/5
20/10
24/12
Bank3
8/4
12/6
8/4
11/5
12/6
16/8
Bank4
18/9
32/16
18/9
19/9
32/16
46/23
Bank5
8/4
14/7
10/5
18/9
17/8
46/23
Bank6
9/4
26/13
9/4
18/8
26/13
32/16
Bank7
12/6
20/10
12/6
12/6
20/10
23/11
Bank8
6/2
14/7
6/2
6/2
14/7
14/7
Bank0 (Top Edge)
0
0
0
0
0
0
Bank1 (Top Edge)
0
0
0
0
0
0
Bank2 (Right Edge)
1
5
1
4
5
6
Bank3 (Right Edge)
3
3
3
3
3
4
Bank4 (Bottom Edge)
0
0
0
0
0
0
Bank5 (Bottom Edge)
0
0
0
0
0
0
Bank6 (Left Edge)
2
7
2
6
7
8
Bank7 (Left Edge)
5
5
5
5
5
5
Bank8 (Right Edge)
0
0
0
0
0
0
4-5
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Pin Information Summary, LFE2-6 and LFE2-12 (Cont.)
LFE2-6
LFE2-12
144
TQFP
256
fpBGA
144
TQFP
208
PQFP
256
fpBGA
484
fpBGA
Bank0
0
0
0
0
0
0
Bank1
0
0
0
0
0
0
Bank2
0
1
0
0
1
1
Bank3
Available DDR-Interfaces per I/O
Bank4
1
Bank
Bank5
0
0
0
0
0
0
0
2
0
0
2
3
0
1
0
0
1
3
Bank6
0
1
0
0
1
1
Bank7
0
1
0
0
1
1
Bank8
0
0
0
0
0
0
Bank0
0
0
0
0
0
0
Bank1
0
0
0
0
0
0
Bank2
0
0
0
0
0
0
Bank3
0
0
0
0
0
0
Bank4
18
32
18
19
32
46
Bank5
8
14
10
18
17
46
Bank6
0
0
0
0
0
0
Bank7
0
0
0
0
0
0
Bank8
0
0
0
0
0
0
Pin Type
PCI Capable I/Os per Bank
1. Minimum requirement to implement a fully functional 8-bit wide DDR bus. Available DDR interface consists of at least 12 I/Os (1 DQS + 1
DQSB + 8 DQs + 1 DM + Bank VREF1).
4-6
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Pin Information Summary, LFE2-20 and LFE2-35
LFE2-20
LFE2-35
208
PQFP
256
fpBGA
484
fpBGA
672
fpBGA
484
fpBGA
672
fpBGA
Single Ended User I/O
131
193
331
402
331
450
Differential Pair User I/O
62
96
165
200
165
224
Pin Type
Configuration
Non Configuration
TAP Pins
5
5
5
5
5
5
Muxed Pins
14
14
14
14
14
14
Dedicated Pins (Non TAP)
7
7
7
7
7
7
Muxed Pins
42
54
60
64
60
68
Dedicated Pins
VCC
3
3
3
3
3
3
14
7
18
24
16
22
VCCAUX
8
4
16
16
16
16
VCCPLL
0
0
0
0
2
2
Bank0
2
2
4
5
4
5
Bank1
2
2
4
5
4
5
Bank2
2
2
4
5
4
5
Bank3
2
2
4
5
4
5
Bank4
2
2
4
5
4
5
Bank5
2
2
4
5
4
5
Bank6
2
2
4
5
4
5
Bank7
2
2
4
5
4
5
VCCIO
Bank8
GND, GND0 to GND7
NC
Single Ended/ Differential I/O
Pairs per Bank (including
emulated with resistors)
True LVDS I/O Pairs per Bank
2
1
2
2
2
2
22
20
60
72
60
72
0
1
8
101
8
102
Bank0
18/9
18/9
50/25
67/33
50/25
67/33
Bank1
18/9
34/17
46/23
52/26
46/23
52/26
Bank2
11/5
20/10
34/17
36/18
34/17
48/24
Bank3
11/5
12/6
22/11
32/16
22/11
42/21
Bank4
19/9
32/16
46/23
50/25
46/23
54/27
Bank5
18/9
17/8
46/23
68/34
46/23
68/34
Bank6
18/8
26/13
40/20
48/24
40/20
58/29
Bank7
12/6
20/10
33/16
35/17
33/16
47/23
Bank8
6/2
14/7
14/7
14/7
14/7
14/7
Bank0 (Top Edge)
0
0
0
0
0
0
Bank1 (Top Edge)
0
0
0
0
0
0
Bank2 (Right Edge)
4
5
9
9
9
12
Bank3 (Right Edge)
3
3
5
8
5
9
Bank4 (Bottom Edge)
0
0
0
0
0
0
Bank5 (Bottom Edge)
0
0
0
0
0
0
Bank6 (Left Edge)
6
7
10
12
10
13
Bank7 (Left Edge)
5
5
8
8
8
11
Bank8 (Right Edge)
0
0
0
0
0
0
4-7
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Pin Information Summary, LFE2-20 and LFE2-35 (Cont.)
LFE2-20
LFE2-35
208
PQFP
256
fpBGA
484
fpBGA
672
fpBGA
484
fpBGA
672
fpBGA
Bank0
0
0
0
0
0
0
Bank1
0
0
0
0
0
0
Bank2
0
1
2
2
2
3
Bank3
Available DDR-Interfaces per I/O
Bank4
1
Bank
Bank5
0
0
0
2
0
2
0
2
3
3
3
3
0
1
3
4
3
4
Bank6
0
1
2
3
1
3
Bank7
0
1
2
2
2
3
Bank8
0
0
0
0
0
0
Bank0
0
0
0
0
0
0
Bank1
0
0
0
0
0
0
Bank2
0
0
0
0
0
0
Bank3
0
0
0
0
0
0
Bank4
19
32
46
50
46
54
Bank5
18
17
46
68
46
68
Bank6
0
0
0
0
0
0
Bank7
0
0
0
0
0
0
Bank8
0
0
0
0
0
0
Pin Type
PCI Capable I/Os per Bank
1. Minimum requirement to implement a fully functional 8-bit wide DDR bus. Available DDR interface consists of at least 12 I/Os (1 DQS + 1
DQSB + 8 DQs + 1 DM + Bank VREF1).
4-8
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Pin Information Summary, LFE2-50 and LFE2-70
LFE2-50
Pin Type
LFE2-70
484 fpBGA
672 fpBGA
672 fpBGA
900 fpBGA
339
500
500
583
Single Ended User I/O
Differential Pair User I/O
169
249
249
290
TAP Pins
5
5
5
5
Muxed Pins
14
14
14
14
Dedicated Pins (Non TAP)
7
7
7
7
Muxed Pins
68
79
79
89
Dedicated Pins
3
3
3
3
VCC
16
20
20
26
VCCAUX
16
16
16
17
Configuration
Non Configuration
VCCPLL
4
4
2
4
Bank0
4
5
5
6
Bank1
4
5
5
6
Bank2
4
5
5
6
Bank3
4
5
5
6
Bank4
4
5
5
6
Bank5
4
5
5
6
Bank6
4
5
5
6
Bank7
4
5
5
6
Bank8
2
2
2
2
GND, GND0 to GND7
60
72
72
104
NC
0
3
5
101
Bank0
50/25
67/33
67/33
84/42
Bank1
46/23
66/33
66/33
76/38
Bank2
38/19
56/28
56/28
74/37
Bank3
22/11
48/24
48/24
48/24
Bank4
46/23
62/31
62/31
72/35
Bank5
46/23
68/34
68/34
80/40
Bank6
40/20
64/32
64/32
64/32
Bank7
37/18
55/27
55/27
71/35
Bank8
VCCIO
Single Ended/ Differential I/O
Pairs per Bank (including
emulated with resistors)
True LVDS I/O Pairs per Bank
14/7
14/7
14/7
14/7
Bank0 (Top Edge)
0
0
0
0
Bank1 (Top Edge)
0
0
0
0
Bank2 (Right Edge)
9
13
13
18
Bank3 (Right Edge)
5
12
12
12
Bank4 (Bottom Edge)
0
0
0
0
Bank5 (Bottom Edge)
0
0
0
0
Bank6 (Left Edge)
10
16
16
16
Bank7 (Left Edge)
8
12
12
16
Bank8 (Right Edge)
0
0
0
0
4-9
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Pin Information Summary, LFE2-50 and LFE2-70 (Cont.)
LFE2-50
Pin Type
LFE2-70
484 fpBGA
672 fpBGA
672 fpBGA
900 fpBGA
Bank0
0
0
0
0
Bank1
0
0
0
0
Bank2
2
3
3
4
Bank3
0
3
3
3
Available DDR-Interfaces per I/O
Bank4
Bank1
Bank5
3
4
4
4
3
4
4
5
Bank6
1
4
4
4
Bank7
2
3
3
4
Bank8
0
0
0
0
Bank0
0
0
0
0
Bank1
0
0
0
0
Bank2
0
0
0
0
PCI Capable I/Os per Bank
Bank3
0
0
0
0
Bank4
46
62
62
72
Bank5
46
68
68
80
Bank6
0
0
0
0
Bank7
0
0
0
0
Bank8
0
0
0
0
1. Minimum requirement to implement a fully functional 8-bit wide DDR bus. Available DDR interface consists of at least 12 I/Os (1 DQS + 1
DQSB + 8 DQs + 1 DM + Bank VREF1).
4-10
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Pin Information Summary, LFE2M20 and LFE2M35
LFE2M20
Pin Type
Single Ended User I/O
Differential Pair User I/O
LFE2M35
256 fpBGA 484 fpBGA 256 fpBGA 484 fpBGA 672 fpBGA
140
304
140
303
410
70
152
70
151
199
TAP Pins
5
5
5
5
5
Muxed Pins
14
14
14
14
14
Dedicated Pins (Non TAP)
7
7
7
7
7
Muxed Pins
64
84
60
84
89
Dedicated Pins
3
3
3
3
3
VCC
6
16
6
16
29
VCCAUX
4
8
4
8
17
Configuration
Non Configuration
VCCPLL
VCCIO
1
4
1
4
8
Bank0
1
4
1
4
5
Bank1
1
3
1
3
4
Bank2
2
4
2
4
5
Bank3
2
4
2
4
5
Bank4
2
4
2
4
4
Bank5
2
4
2
4
5
Bank6
2
4
2
4
5
Bank7
2
4
2
4
5
Bank8
1
2
1
2
2
GND, GND0 to GND7
22
57
22
57
80
NC
17
11
17
12
37
Bank0
0/0
36/18
0/0
36/18
63/31
Bank1
0/0
18/9
0/0
18/9
18/9
Bank2
14/7
30/15
14/7
30/15
50/25
Single Ended/ Differential I/O Bank3
Pairs per Bank (including
Bank4
emulated with resistors)
Bank5
16/8
36/18
16/8
36/18
43/21
32/16
62/31
32/16
62/31
50/21
20/10
28/14
20/10
28/14
60/30
Bank6
16/8
40/20
16/8
39/19
52/25
Bank7
28/14
40/20
28/14
40/20
60/30
Bank8
14/7
14/7
14/7
14/7
14/7
Bank0 (Top Edge)
0
0
0
0
0
Bank1 (Top Edge)
0
0
0
0
0
Bank2 (Right Edge)
3
7
3
7
12
Bank3 (Right Edge)
4
9
4
9
11
True LVDS I/O Pairs per Bank Bank4 (Bottom Edge)
0
0
0
0
0
Bank5 (Bottom Edge)
0
0
0
0
0
Bank6 (Left Edge)
4
10
4
10
14
Bank7 (Left Edge)
7
10
7
10
15
Bank8 (Right Edge)
0
0
0
0
0
4-11
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Pin Information Summary, LFE2M20 and LFE2M35 (Cont.)
LFE2M20
Pin Type
LFE2M35
256 fpBGA 484 fpBGA 256 fpBGA 484 fpBGA 672 fpBGA
Bank0
0
0
0
0
0
Bank1
0
0
0
0
0
Bank2
0
1
0
1
3
Bank3
0
1
0
1
2
Available DDR-Interfaces per
Bank4
I/O Bank1
Bank5
2
4
2
4
3
1
2
1
2
3
Bank6
0
3
0
1
2
Bank7
1
2
1
2
3
PCI Capable I/Os per Bank
Bank8
0
0
0
0
0
Bank0
0
0
0
0
0
Bank1
0
0
0
0
0
Bank2
0
0
0
0
0
Bank3
0
0
0
0
0
Bank4
32
62
32
62
50
Bank5
20
28
20
28
60
Bank6
16
40
16
39
52
Bank7
28
40
28
40
60
Bank8
0
0
0
0
0
1. Minimum requirement to implement a fully functional 8-bit wide DDR bus. Available DDR interface consists of at least 12 I/Os (1 DQS + 1
DQSB + 8 DQs + 1 DM + Bank VREF1).
4-12
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Pin Information Summary, LFE2M50, LFE2M70 and
LFE2M100
LFE2M50
Pin Type
Single Ended User I/O
Differential Pair User I/O
LFE2M70
LFE2M100
484 fpBGA 672 fpBGA 900 fpBGA 900 fpBGA 1152 fpBGA 900 fpBGA 1152 fpBGA
270
372
410
416
436
416
520
260
135
185
205
208
218
207
TAP Pins
5
5
5
5
5
5
5
Muxed Pins
14
14
14
14
14
14
14
Dedicated Pins
(Non TAP)
7
7
7
7
7
7
7
Muxed Pins
69
72
72
75
76
74
78
Dedicated Pins
3
3
3
3
3
3
3
VCC
16
20
62
44
44
44
44
VCCAUX
8
26
18
16
12
16
12
Configuration
Non Configuration
VCCPLL
4
8
4
4
4
4
4
Bank0
4
5
6
6
7
6
7
Bank1
3
4
6
6
7
6
7
Bank2
4
5
9
9
9
9
9
Bank3
4
5
9
9
9
9
9
Bank4
4
4
6
6
7
6
7
Bank5
4
5
6
6
7
6
7
Bank6
4
5
9
9
9
9
9
Bank7
4
5
9
9
9
9
9
Bank8
2
2
2
2
2
2
2
GND, GND0 to GND7
57
80
122
122
134
122
134
NC
31
35
121
63
283
63
199
Bank0
36/18
63/31
56/28
34/17
46/23
34/17
54/27
Bank1
18/9
18/9
36/18
42/21
34/17
42/21
44/22
Bank2
30/15
50/25
54/27
70/35
72/36
70/35
80/40
Single Ended/ Differential Bank3
I/O Pairs per Bank (includ- Bank4
ing emulated with resistors)
Bank5
36/18
43/21
44/22
60/30
64/32
60/30
80/40
42/21
24/12
38/19
38/19
40/20
38/19
44/22
28/14
60/30
58/29
40/20
40/20
40/20
46/23
Bank6
40/20
54/27
60/30
62/31
66/33
62/31
82/41
Bank7
40/20
60/30
64/32
70/35
74/37
70/35
90/45
Bank8
VCCIO
True LVDS I/O Pairs per
Bank
0/0
0/0
0/0
0/0
0/0
0/0
0/0
Bank0 (Top Edge)
0
0
0
0
0
0
0
Bank1 (Top Edge)
0
0
0
0
0
0
0
Bank2 (Right Edge)
7
12
13
17
18
17
20
Bank3 (Right Edge)
9
11
11
15
16
15
20
Bank4 (Bottom Edge)
0
0
0
0
0
0
0
Bank5 (Bottom Edge)
0
0
0
0
0
0
0
Bank6 (Left Edge)
10
14
15
15
16
15
20
Bank7 (Left Edge)
10
15
17
17
18
17
22
Bank8 (Right Edge)
0
0
0
0
0
0
0
4-13
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Pin Information Summary, LFE2M50, LFE2M70 and LFE2M100
(Cont.)
LFE2M50
Pin Type
Available DDR-Interfaces
per I/O Bank1
LFE2M70
LFE2M100
484 fpBGA 672 fpBGA 900 fpBGA 900 fpBGA 1152 fpBGA 900 fpBGA 1152 fpBGA
Bank0
0
0
0
0
0
0
0
Bank1
0
0
0
0
0
0
0
Bank2
2
4
2
4
4
4
4
Bank3
2
3
1
3
4
3
5
Bank4
3
1
3
3
3
3
3
Bank5
2
3
3
2
3
2
3
Bank6
1
3
2
3
4
3
5
Bank7
3
4
3
4
4
4
5
Bank8
0
0
0
0
0
0
0
Bank0
0
0
0
0
0
0
0
Bank1
0
0
0
0
0
0
0
Bank2
0
0
0
0
72
0
80
Bank3
0
0
0
0
64
0
80
PCI Capable I/Os per Bank Bank4
50
24
48
48
40
48
44
Bank5
60
60
50
40
40
40
46
Bank6
52
54
60
62
66
62
82
Bank7
60
60
68
70
74
70
90
Bank8
0
0
0
0
0
0
0
1. Minimum requirement to implement a fully functional 8-bit wide DDR bus. Available DDR interface consists of at least 12 I/Os (1 DQS + 1
DQSB + 8 DQs + 1 DM + Bank VREF1).
4-14
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Available Device Resources by Package, LatticeECP2
Resource
PLL/DLL
Device
256 fpBGA
484 fpBGA
672 fpBGA
900 fpBGA
ECP2-6
4
—
—
—
ECP2-12
4
4
—
—
ECP2-20
4
4
4
—
ECP2-35
—
4
4
—
ECP2-50
—
6
6
—
ECP2-70
—
—
8
8
Available Device Resources by Package, LatticeECP2M
Resource
PLL/DLL
Device
256 fpBGA
484 fpBGA
672 fpBGA
900 fpBGA
1152 fpBGA
ECP2M20
10
10
—
—
—
ECP2M35
10
10
10
—
—
ECP2M50
—
10
10
10
—
ECP2M70
—
—
—
10
10
ECP2M100
—
—
—
10
10
4-15
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Power Supply and NC
144 TQFP3
Signals
VCC
16, 22, 29, 48, 54, 83,
94, 102, 128, 135
208 PQFP3
256 fpBGA4
484 fpBGA4
12, 19, 28, 40, 74, 80, LFE2-6: G7, G9, G10,
97, 116, 129, 140, 146, H7, J10, K10, K8
171, 188, 198
LFE2-12/LFE2-20: G7,
G9, G10, H7, J10, K10,
K8
LFE2-12/LFE2-20: N6, N18, J10,
J11, J12, J13, K14, K9, L14, L9,
M14, M9, N14, N9, P10, P11, P12,
P13
LFE2-35/LFE2-50: J10, J11, J12,
J13, K14, K9, L14, L9, M14, M9,
N14, N9, P10, P11, P12, P13
VCCIO0
139
195, 206
C5, E7
G10, G9, H8, H9
VCCIO1
117
162, 170
C12, E10
G11, G12, G13, G14
VCCIO2
106
143, 148
E14, G12
H14, H15, J15, K16
VCCIO3
89
123, 135
K12, M14
L16, M16, N16, P16
VCCIO4
64
93, 100
M10, P12
R14, T12, T13, T14
VCCIO5
42
55, 63
M7, P5
R9, T10, T11, T9
VCCIO6
31
38, 44
K5, M3
N7, P7, P8, R8
VCCIO7
9
10, 14
E3, G5
J8, K7, L7, M7
VCCIO8
85
113, 118
T15
P15, R15
VCCJ
35
51
K7
T8
VCCAUX
6, 39, 90, 142
7, 30, 70, 86, 125, 151, G8, H10, J7, K9
174, 190
G5, K5, R5, V7, V11, V8, V13, V15,
M17, P17, E17, G18, D11, F13,
C5, E6
VCCPLL
None
None
LFE2-12/LFE2-20: None
None
LFE2-35: N6, N18
LFE2-50: N6, N18, K6, J16
1
GND
11, 21, 30, 47, 51, 61,
81, 95, 105, 120, 133,
138
5, 13, 17, 25, 32, 42, 60,
68, 77, 81, 89, 102, 115,
122, 139, 145, 159, 169,
175, 184, 192, 201
A1, A16, B12, B5, C8,
E15, E2, H14, H8, H9,
J3, J8, J9, M15, M2, P9,
R12, R5, T1, T16
A22, AA19, AA4, AB1, AB22, B19,
B4, C14, C9, D2, D21, F17, F6,
H10, H11, H12, H13, J14, J20, J3,
J9, K10, K11, K12, K13, K15, K8,
L10, L11, L12, L13, L15, L8, M10,
M11, M12, M13, M15, M8, N10,
N11, N12, N13, N15, N8, P14,
P20, P3, P9, R10, R11, R12, R13,
U17, U6, W2, W21, Y14, Y9, A1
NC2
LFE2-6: 45, 46, 124,
127
None
LFE2-6: K6, R3, P4
LFE2-12: E3, F3, F1, H4, F2, H5,
G1, G3, G2, G4, K6, N1, M2, N2,
M1, N3, N5, N4, P5, N19, M19,
J22, L22, H22, K22, J16, D22,
F21, E21, E22, H19, G20, G19,
F20, C21, C22, H6, J6, H3, H2,
H17, H16, H20, H18
LFE2-12: 127
LFE2-12/LFE2-20:
None
LFE2-20/LFE2-35: K6, J16, H6,
J6, H3, H2, H17, H16, H20, H18
LFE2-50: None
1. All grounds must be electrically connected at the board level. For fpBGA packages, the total number of GND balls is less than the actual
number of GND logic connections from the die to the common package GND plane.
2. NC pins should not be connected to any active signals, VCC or GND.
3. Pin orientation follows the conventional order from the pin 1 marking of the top side view and counter-clockwise.
4. Pin orientation A1 starts from the upper left corner of the top side view with alphabetical order ascending vertically and numerical order
ascending horizontally.
4-16
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Power Supply and NC (Cont.)
672 fpBGA3
Signals
900 fpBGA3
VCC
LFE2-20: R8, P18, M8, L20, L12, L13, L14, L15,
AA11, AA20, K11, K21, K22, L11, L12, L13, L18, L19, L20,
M11, M12, M15, M16, N11, N16, P11, P16, R11,
M11, M20, N11, N20, V11, V20, W11, W20, Y10, Y11, Y12,
R12, R15, R16, T12, T13, T14, T15
Y13, Y18, Y19, Y20
LFE2-35/LFE2-50: L12, L13, L14, L15, M11, M12,
M15, M16, N11, N16, P11, P16, R11, R12, R15,
R16, T12, T13, T14, T15
LFE2-70: L12, L13, L14, L15, M11, M12, M15,
M16, N11, N16, P11, P16, R11, R12, R15, R16,
T12, T13, T14, T15
VCCIO0
D11, D6, G9, J12, K12
J13, J14, K12, K13, K14, K15
VCCIO1
D16, D21, G18, J15, K15
J17, J18, J20, K17, K18, K20
VCCIO2
F23, J20, L23, M17, M18
L21, M21, M22, N21, N22, R21
VCCIO3
AA23, R17, R18, T23, V20
U21, U22, V21, V22, W21, Y22
VCCIO4
AC16, AC21, U15, V15, Y18
AA16, AA17, AA18, AA19, AB17, AB18
VCCIO5
AC11, AC6, U12, V12, Y9
AA12, AA13, AA14, AB12, AB13, AB14
VCCIO6
AA4, R10, R9, T4, V7
U10, U9, V10, W10, W9, Y9
VCCIO7
F4, J7, L4, M10, M9
L10, L9, M10, N10, P10, R10
VCCIO8
AE25, V18
AA21, Y21
VCCJ
AB5
AD3
VCCAUX
J10, J11, J16, J17, K18, L18, T18, U18, V16, V17, AA15, AB11, AB19, AB20, J11, J12, J19, K19, L22, M9,
V10, V11, T9, U9, K9, L9
N9, P21, P9, T10, T21, V9, W22
VCCPLL
LFE2-20: None
LFE2-35/LFE2-70: R8, P18
LFE2-50: R8, P18, M8, L20
P22, P8, T22, Y7
GND1
A2, A25, AA18, AA24, AA3, AA9, AD11, AD16,
AD21, AD6, AE1, AE26, AF2, AF25, B1, B26, C11,
C16, C21, C6, F18, F24, F3, F9, J13, J14, J21, J6,
K10, K11, K13, K14, K16, K17, L10, L11, L16, L17,
L24, L3, M13, M14, N10, N12, N13, N14, N15,
N17, P10, P12, P13, P14, P15, P17, R13, R14,
T10, T11, T16, T17, T24, T3, U10, U11, U13, U14,
U16, U17, V13, V14, V21, V6
A1, A30, AC28, AC3, AH13, AH18, AH23, AH28, AH3,
AH8, AK1, AK30, C13, C18, C23, C28, C3, C8, H28, H3,
L14, L15, L16, L17, M12, M13, M14, M15, M16, M17,
M18, M19, N12, N13, N14, N15, N16, N17, N18, N19,
N28, N3, P11, P12, P13, P14, P15, P16, P17, P18, P19,
P20, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20,
T11, T12, T13, T14, T15, T16, T17, T18, T19, T20, U11,
U12, U13, U14, U15, U16, U17, U18, U19, U20, V12, V13,
V14, V15, V16, V17, V18, V19, V28, V3, W12, W13, W14,
W15, W16, W17, W18, W19, Y14, Y15, Y16, Y17
NC2
LFE2-20: E4, E3, E2, E1, H6, H5, F2, F1, H8, J9,
G4, G3, K3, K2, K1, L2, L1, M2, M1, N2, T1, T2,
P8, P6, P5, P4, U1, V1, P3, R3, R4, U2, V2, W2,
T6, R5, AA19, W17, Y19, Y17, AF20, AE20, AA20,
W18, AD20, AE21, AF21, AF22, R22, T21, P26,
P25, R24, R23, P20, R19, P21, P19, P23, P22,
N22, R21, N26, N25, J26, J25, J23, K23, H26,
H25, H24, H23, F22, E24, D25, C25, D24, B25,
H21, G22, B24, C24, D23, C23, E19, C19, B21,
B20, D19, B19, G17, E18, G19, F17, A20, A19,
E17, D18, M3, N6, P24
LFE2-35: K3, K2, K1, L2, L1, M2, M1, N2, M8, P3,
R3, R4, U2, V2, W2, AF20, AE20, AA20, W18,
AD20, AE21, AF21, AF22, P26, P25, R24, R23,
P20, R19, L20, J26, J25, J23, K23, H26, H25, H24,
H23, E19, C19, B21, B20, D19, B19, G17, E18,
G19, F17, A20, A19, E17, D18, M3, N6, P24
LFE2-50: N6, P24, M3
LFE2-70: M8, L20, M3, P24, N6
A2, A3, A4, A5, AB28, AC4, AD23, AE1, AE2, AE29, AE3,
AE30, AE4, AE5, AE6, AF1, AF2, AF23, AF26, AF27,
AF28, AF29, AF3, AF30, AF4, AF5, AG1, AG13, AG16,
AG18, AG2, AG26, AG27, AG28, AG29, AG3, AG30, AG4,
AG8, AH1, AH16, AH2, AH26, AH27, AH29, AH30, AH4,
AJ1, AJ2, AJ27, AJ28, AJ29, AJ3, AJ30, AK2, AK27,
AK28, AK29, AK3, B1, B2, B3, B30, B4, B5, C1, C2, C29,
C30, C4, D13, D18, D23, D28, D29, D3, D30, D4, E25,
E26, E27, E28, E29, E3, E30, E4, E5, E6, F25, F5, F6, G6,
G7, K10, K9, N27, N4, R1, R2, V27, V4
1. All grounds must be electrically connected at the board level. For fpBGA packages, the total number of GND balls is less than the actual
number of GND logic connections from the die to the common package GND plane.
2. NC pins should not be connected to any active signals, VCC or GND.
3. Pin orientation A1 starts from the upper left corner of the top side view with alphabetical order ascending vertically and numerical order
ascending horizontally.
4-17
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Power Supply and NC
Signal
256 fpBGA
484 fpBGA
VCC
G7, G9, H7, J10, K10, K8
J10, J11, J12, J13, K14, K9, L14, L9, M14, M9, N14,
N9, P10, P11, P12, P13
VCCIO0
E7
B5, B9, E7, H9
VCCIO1
E10
D13, E16, H14
VCCIO2
E14, G12
E21, G18, J15, K19
VCCIO3
K12, M14
N19, P15, T18, V21
VCCIO4
M10, P12
AA18, R14, V16, W13
VCCIO5
M7, P5
AA5, R9, V7, W10
VCCIO6
K5, M3
N4, P8, T5, V2
VCCIO7
E3, G5
E2, G5, J8, K4
VCCIO8
T15
AA22, U19
VCCJ
K7
W4
VCCAUX
G8, H10, J7, K9
H11, H12, L15, L8, M15, M8, R11, R12
VCCPLL
G10
R8, H15, H8, R15
SERDES Power3
C15, B15, C12, A12, C11, C10, C14, C13, B9,
C9, C5, C4, C8, C7, A6, C6, B3, C3
C22, B22, C19, A19, C18, C17, C21, C20, B16, C16,
C12, C11, C15, C14, A13, C13, B10, C10
GND1
A1, A15, A16, A3, A9, B12, B6, E15, E2, H14,
H8, H9, J3, J8, J9, M15, M2, P9, R12, R5, T1,
T16
A1, A10, A16, A22, AA19, AA4, AB1, AB22, B13,
B19, B4, D16, D2, D21, D7, G19, G4, H10, H13, J14,
J9, K10, K11, K12, K13, K15, K20, K3, K8, L10, L11,
L12, L13, M10, M11, M12, M13, N10, N11, N12, N13,
N15, N20, N3, N8, P14, P9, R10, R13, T19, T4, W16,
W2, W21, W7, Y10, Y13
NC2
D10, D11, D12, D13, D14, D4, D5, D6, D7, E11, LFE2M20: D14, D15, E14, E15, F13, F14, F15, G12,
E6, E8, E9, F10, F7, F8, F9
G13, G14, G15
LFE2M35: D14, D15, E14, E15, F13, F14, F15, G12,
G13, G14, G15, U6
LFE2M50: Y15, W15, AB20, AB21, AA20, AB19,
AB18, Y22, Y21, Y17, Y18, Y16, W17, Y19, Y20, W19,
W18, V17, V18, D15, G14, G15, D14, E15, E14, F15,
F14, F13, G12, G13
1. All grounds must be electrically connected at the board level. For fpBGA packages, the total number of GND balls is less than the actual
number of GND logic connections from the die to the common package GND plane.
2. NC pins should not be connected to any active signals, VCC or GND.
3. For package migration across device densities, the designer must comprehend the package pin requirements for the SERDES blocks. Specifically, the SERDES power pins of the largest density device must be accounted to accommodate migration to other smaller devices using
the same package. Please refer to technical note TN1160, LatticeECP2/M Density Migration, for more details.
4-18
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Power Supply and NC (Cont.)
Signal
672 fpBGA
900 fpBGA
VCC
LFE2M35: AD13, AD14, AD16, AD17, AD19, AD21,
AD22, AD24, AD25, L12, L13, L14, L15, M11, M12,
M15, M16, N11, N16, P11, P16, R11, R12, R15, R16,
T12, T13, T14, T15
LFE2M50: AH1, AH4, AH5, AH2, AH7, AH12, AH9,
AH10, AH13, C13, C10, C9, C12, C7, C2, C5, C4,
C1, L12, L13, L18, L19, M11, M12, M13, M14, M15,
M16, M17, M18, M19, M20, N11, N12, N19, N20,
P12, P19, R12, R19, T12, T19, U12, U19, V11, V12,
LFE2M50: L12, L13, L14, L15, M11, M12, M15, M16, V19, V20, W11, W12, W13, W14, W15, W16, W17,
N11, N16, P11, P16, R11, R12, R15, R16, T12, T13, W18, W19, W20, Y12, Y13, Y18, Y19
T14, T15
LFE2M70/LFE2M100: L12, L13, L18, L19, M11,
M12, M13, M14, M15, M16, M17, M18, M19, M20,
N11, N12, N19, N20, P12, P19, R12, R19, T12, T19,
U12, U19, V11, V12, V19, V20, W11, W12, W13,
W14, W15, W16, W17, W18, W19, W20, Y12, Y13,
Y18, Y19
VCCIO0
B12, B7, F11, J13, K12
D14, E6, E9, F12, K12, K13
VCCIO1
D18, F16, J14, K15
D17, E22, E25, F19, K18, K19
VCCIO2
G25, L21, M17, M25, N18
F28, J25, K28, M21, M24, N21, N28, P21, R25
VCCIO3
P18, R17, R25, T21, Y25
AA28, AB25, AE28, T25, U21, V21, V28, W21, W24
VCCIO4
AA16, AC18, U15, V14
AA18, AA19, AE19, AF22, AG17, AG25
VCCIO5
AA11, AE12, AE7, U12, V13
AA12, AA13, AE12, AF9, AG14, AG6
VCCIO6
P9, R10, R2, T6, Y2
AA3, AB6, AE3, T6, U10, V10, V3, W10, W7
VCCIO7
G2, L6, M10, M2, N9
F3, J6, K3, M10, M7, N10, N3, P10, R6
VCCIO8
AC24, U17
AA25, AD28
VCCJ
AA7
AG1
VCCAUX
LFE2M35: AE19, J11, J12, J15, J16, L18, L9, M18,
M9, R18, R9, T18, T9, V11, V12, V15, V16
LFE2M50: AJ7, B7, AA10, AA11, AA20, AA21, K10,
K11, K20, K21, L10, L11, L20, L21, Y10, Y11, Y20,
Y21
LFE2M50: J11, J12, J15, J16, L18, L9, M18, M9,
R18, R9, T18, T9, V11, V12, V15, V16
VCCPLL
H7, K6, P7, R8, V18, P20, J17, G19
LFE2M70/LFE2M100: AA10, AA11, AA20, AA21,
K10, K11, K20, K21, L10, L11, L20, L21, Y10, Y11,
Y20, Y21
N13, N18, V13, V18
SERDES Power3 LFE2M35: C25, B25, C22, A22, C21, C20, C24, C23, LFE2M50: AH18, AJ18, AH21, AK21, AH22, AH23,
B19, C19, C15, C14, C18, C17, A16, C16, B13, C13 AH19, AH20, AH24, AJ24, AH28, AH29, AH25,
AH26, AK27, AH27, AJ30, AH30, C30, B30, C27,
LFE2M50: AD13, AE13, AD16, AF16, AD17, AD18, A27, C26, C25, C29, C28, B24, C24, C20, C19, C23,
AD14, AD15, AD19, AE19, AD23, AD24, AD20,
C22, A21, C21, B18, C18
AD21, AF22, AD22, AE25, AD25, C25, B25, C22,
A22, C21, C20, C24, C23, B19, C19, C15, C14, C18, LFE2M70/LFE2M100: C13, B13, C10, A10, C9, C8,
C17, A16, C16, B13, C13
C12, C11, B7, C7, C3, C2, C6, C5, A4, C4, B1, C1,
C30, B30, C27, A27, C26, C25, C29, C28, B24, C24,
C20, C19, C23, C22, A21, C21, B18, C18, AH18,
AJ18, AH21, AK21, AH22, AH23, AH19, AH20,
AH24, AJ24, AH28, AH29, AH25, AH26, AK27,
AH27, AJ30, AH30, AH1, AJ1, AH4, AK4, AH5, AH6,
AH2, AH3, AH7, AJ7, AH11, AH12, AH8, AH9, AK10,
AH10, AJ13, AH13
4-19
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Power Supply and NC (Cont.)
Signal
GND1
672 fpBGA
900 fpBGA
A13, A19, A2, A25, AA2, AA25, AB18, AB22, AB5,
AB9, AE1, AE11, AE16, AE22, AE26, AE6, AF13,
AF19, AF2, AF25, B1, B11, B16, B22, B26, B6, E18,
E22, E5, E9, F2, F25, G11, G16, J22, J5, K11, K13,
K14, K16, L10, L11, L16, L17, L2, L20, L25, L7, M13,
M14, N10, N12, N13, N14, N15, N17, P10, P12, P13,
P14, P15, P17, R13, R14, T10, T11, T16, T17, T2,
T20, T25, T7, U11, U13, U14, U16, V22, V5, Y11, Y16
LFE2M50: A1, A13, A18, A24, A30, A7, AA14, AA15,
AA16, AA17, AA24, AA27, AA4, AB24, AB7, AD12,
AD19, AD27, AE22, AE27, AE4, AE9, AF14, AF17,
AF25, AF6, AJ10, AJ21, AJ27, AJ4, AK1, AK13,
AK18, AK24, AK30, AK7, B10, B21, B27, B4, D25,
D6, E14, E17, F22, F27, F4, F9, G12, G19, J24, J7,
K14, K15, K16, K17, K27, K4, L14, L15, L16, L17,
M23, M8, N14, N15, N16, N17, N27, N4, P11, P13,
P14, P15, P16, P17, P18, P20, R10, R11, R13, R14,
R15, R16, R17, R18, R20, R21, R24, R7, T10, T11,
T13, T14, T15, T16, T17, T18, T20, T21, T24, T7,
U11, U13, U14, U15, U16, U17, U18, U20, V14, V15,
V16, V17, V27, V4, W23, W8, Y14, Y15, Y16, Y17
LFE2M70/LFE2M100: A1, A13, A18, A24, A30, A7,
AA14, AA15, AA16, AA17, AA24, AA27, AA4, AB24,
AB7, AD12, AD19, AD27, AE22, AE27, AE4, AE9,
AF14, AF17, AF25, AF6, AJ10, AJ21, AJ27, AJ4,
AK1, AK13, AK18, AK24, AK30, AK7, B10, B21, B27,
B4, D25, D6, E14, E17, F22, F27, F4, F9, G12, G19,
J24, J7, K14, K15, K16, K17, K27, K4, L14, L15, L16,
L17, M23, M8, N15, N16, N17, N27, N4, P11, P13,
P14, P15, P16, P17, P18, P20, R10, R11, R13, R14,
R15, R16, R17, R18, R20, R21, R24, R7, T10, T11,
T13, T14, T15, T16, T17, T18, T20, T21, T24, T7,
U11, U13, U14, U15, U16, U17, U18, U20, V14, V15,
V16, V17, V27, V4, W23, W8, Y14, Y15, Y16, Y17
NC2
LFE2M35: AB3, AB4, AC1, AC2, AD15, AD18, AD20,
AD23, AE13, AE25, AF16, AF22, B4, B5, C26, D20,
D21, D22, D23, D24, D25, D26, E20, E21, E25, E26,
F20, G20, K10, K17, R4, U10, U23, V10, W7, N7, V7
LFE2M50: G5, G4, K7, K8, E1, F2, F1, G3, G2, G1,
L9, L7, K6, K5, L8, L6, AA1, AA2, Y3, AB1, Y9, Y8,
Y7, AA7, AB2, AB3, AA5, AA6, AB4, AB5, AA8, AA9,
AJ1, AK4, AH6, AH3, AH11, AH8, AK10, AJ13,
AB26, AB27, Y24, Y25, AA29, Y28, Y30, Y29, W22,
LFE2M50: AB3, AB4, AC1, AC2, B4, B5, C26, D20, V22, Y27, Y26, W30, W29, W25, W26, L24, L23, D30,
D21, D22, D23, D24, D25, D26, E20, E21, E25, E26, D29, K24, K25, J27, K26, J26, H26, H27, G26, H23,
F20, G20, K10, K17, R4, U10, U23, V10, W7, AB21, H24, D28, E28, J18, J19, H17, J17, F18, F17, B13,
AC20, AC21, AC22, AC23, AC25, AD26, W20
A10, C8, C11, C3, C6, A4, B1, AA26, AB11, AB12,
AB13, AB14, AB15, AB16, AB17, AB19, AB20, AB21,
AC11, AC21, AC22, AD21, AD22, AE23, AF20,
AF23, AG23, AG26, F20, F23, G10, G20, G21, H19,
H20, H21, H22, J20, J21, R9, U22, W9
LFE2M70/LFE2M100: AA26, AB10, AB11, AB12,
AB13, AB14, AB15, AB16, AB17, AB19, AB20, AB21,
AB9, AC10, AC11, AC21, AC22, AC8, AC9, AD21,
AD22, AD4, AD5, AD6, AD7, AD8, AE23, AE5, AE6,
AE7, AF20, AF23, AF5, AG23, AG26, D10, E10, E11,
F10, F20, F23, F8, G10, G20, G21, G7, G8, G9, H19,
H20, H21, H22, H6, H8, H9, J10, J20, J21, J9, K9,
R9, U22, W9
1. All grounds must be electrically connected at the board level. For fpBGA packages, the total number of GND balls is less than the actual
number of GND logic connections from the die to the common package GND plane.
2. NC pins should not be connected to any active signals, VCC or GND.
3. For package migration across device densities, the designer must comprehend the package pin requirements for the SERDES blocks. Specifically, the SERDES power pins of the largest density device must be accounted to accommodate migration to other smaller devices using
the same package. Please refer to technical note TN1160, LatticeECP2/M Density Migration, for more details.
4-20
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Power Supply and NC (Cont.)
Signal
1152 fpBGA
VCC
AA13, AA14, AA15, AA16, AA17, AA18, AA19, AA20, AA21, AA22, AB14, AB15, AB20, AB21, N14, N15, N20, N21,
P13, P14, P15, P16, P17, P18, P19, P20, P21, P22, R13, R14, R21, R22, T14, T21, U14, U21, V14, V21, W14, W21,
Y13, Y14, Y21, Y22
VCCIO0
C12, C16, E14, H12, H16, M14, M15
VCCIO1
C19, C23, E21, H19, H23, M20, M21
VCCIO2
G32, K28, K32, N27, N32, P23, R23, T27, T32
VCCIO3
AA23, AB27, AB32, AE28, AE32, AH32, W27, W32, Y23
VCCIO4
AC20, AC21, AG19, AG23, AK21, AM19, AM23
VCCIO5
AC14, AC15, AG12, AG16, AK14, AM12, AM16
VCCIO6
AA12, AB3, AB8, AE3, AE7, AH3, W3, W8, Y12
VCCIO7
G3, K3, K7, N3, N8, P12, R12, T3, T8
VCCIO8
AD28, AG32
VCCJ
AK3
VCCAUX
AB12, AB13, AB22, AB23, AC13, AC22, M13, M22, N12, N13, N22, N23
VCCPLL
R15, R20, Y15, Y20
SERDES Power3
D7, B9, B8, D9, B7, E7, B6, D8, E6, D6, D4, B5, D3, B4, C1, B3, B1, B2, B33, B34, B32, C34, B31, D32, B30, D31, E29,
D29, D27, B29, E28, B28, D26, B27, B26, D28, AL28, AN26, AN27, AL26, AN28, AK28, AN29, AL27, AL29, AK29,
AL31, AN30, AL32, AN31, AM34, AN32, AN34, AN33, AN2, AN1, AN3, AM1, AN4, AL3, AN5, AL4, AL6, AK6, AL8, AN6,
AK7, AN7, AL9, AN8, AN9, AL7
GND1
A1, A10, A13, A22, A25, A34, AB16, AB17, AB18, AB19, AB26, AB31, AB4, AB9, AC16, AC17, AC18, AC19, AD27,
AE27, AE31, AE4, AE8, AF12, AF16, AF19, AF23, AG31, AH31, AH4, AJ14, AJ21, AK27, AK8, AL10, AL16, AL19, AL2,
AL25, AL33, AP1, AP10, AP13, AP22, AP25, AP34, D10, D16, D19, D2, D25, D33, E27, E8, F14, F21, G31, G4, J12,
J16, J19, J23, K27, K31, K4, K8, M16, M17, M18, M19, N16, N17, N18, N19, N26, N31, N4, N9, R16, R17, R18, R19,
T12, T13, T15, T16, T17, T18, T19, T20, T22, T23, T26, T31, T4, T9, U12, U13, U15, U16, U17, U18, U19, U20, U22,
U23, V12, V13, V15, V16, V17, V18, V19, V20, V22, V23, W12, W13, W15, W16, W17, W18, W19, W20, W22, W23, W26,
W31, W4, W9, Y16, Y17, Y18, Y19
NC2
LFE2M70: H2, H1, G5, G6, M9, M10, H3, H4, P3, P4, P9, M7, P1, P2, N7, P7, AC7, AC5, AC6, AD5, AD4, AD3, AD10,
AD8, AD2, AD1, AD9, AC11, AD6, AD7, AE1, AE2, AJ12, AH12, AL13, AK13, AE14, AG13, AH22, AH21, AG22, AG21,
AF33, AF34, AC27, AC28, AD29, AD30, AE33, AE34, AD32, AD31, AB25, AC25, AB28, AA26, AD33, AD34, P30, P29,
P31, P32, R25, T24, N34, N33, F24, G23, J22, G22, H21, K21, L19, L20, L18, K19, J14, L15, H14, K14, F12, D11, F11,
E11, A11, A12, A23, A24, AA11, AB11, AC26, AC30, AD11, AD12, AD13, AD14, AD15, AD19, AD21, AD22, AD23,
AE10, AE11, AE12, AE13, AE19, AE21, AE22, AE23, AF11, AF21, AF22, AF24, AF8, AF9, AG10, AG11, AG24, AG25,
AG26, AG3, AG7, AG8, AG9, AH10, AH11, AH13, AH24, AH25, AH26, AH27, AH5, AH6, AH7, AH8, AH9, AJ10, AJ11,
AJ13, AJ24, AJ25, AJ26, AJ27, AJ3, AJ4, AJ5, AJ6, AJ7, AJ8, AJ9, AK10, AK11, AK12, AK24, AK25, AK26, AK4, AK9,
AL11, AL12, AL34, AM10, AM11, AM13, AM25, AN10, AN11, AN12, AN13, AN24, AN25, AP11, AP12, AP24, B10, B11,
B12, B13, B22, B23, B24, B25, C10, C11, C13, C22, C24, C25, D1, D15, D24, D34, E10, E24, E25, E26, E3, E31, E32,
E33, E34, E4, E9, F10, F25, F26, F27, F28, F29, F30, F31, F32, F33, F34, F5, F6, F7, F8, F9, G10, G11, G24, G25,
G26, G27, G28, G29, G30, G33, G34, G7, G8, G9, H10, H11, H24, H25, H26, H27, H28, H29, H8, H9, J10, J11, J24,
J25, J26, J9, K10, K11, K12, K13, K23, K24, K25, K26, L11, L12, L13, L14, L21, L22, L23, L24, L25, L26, M11, M24,
M25, M6, M8, N10, N11, P10, P25, P26, R9, T11, U11, W11, Y10, Y11
LFE2M100: A11, A12, A23, A24, AA11, AB11, AC26, AC30, AD11, AD12, AD13, AD14, AD15, AD19, AD21, AD22,
AD23, AE10, AE11, AE12, AE13, AE19, AE21, AE22, AE23, AF11, AF21, AF22, AF24, AF8, AF9, AG10, AG11, AG24,
AG25, AG26, AG3, AG7, AG8, AG9, AH10, AH11, AH13, AH24, AH25, AH26, AH27, AH5, AH6, AH7, AH8, AH9, AJ10,
AJ11, AJ13, AJ24, AJ25, AJ26, AJ27, AJ3, AJ4, AJ5, AJ6, AJ7, AJ8, AJ9, AK10, AK11, AK12, AK24, AK25, AK26, AK4,
AK9, AL11, AL12, AL34, AM10, AM11, AM13, AM25, AN10, AN11, AN12, AN13, AN24, AN25, AP11, AP12, AP24, B10,
B11, B12, B13, B22, B23, B24, B25, C10, C11, C13, C22, C24, C25, D1, D15, D24, D34, E10, E24, E25, E26, E3, E31,
E32, E33, E34, E4, E9, F10, F25, F26, F27, F28, F29, F30, F31, F32, F33, F34, F5, F6, F7, F8, F9, G10, G11,G24, G25,
G26, G27, G28, G29, G30, G33, G34, G7, G8, G9, H10, H11, H24, H25, H26, H27, H28, H29, H8, H9, J10, J11, J24,
J25, J26, J9, K10, K11, K12, K13, K23, K24, K25, K26, L11, L12, L13, L14, L21, L22, L23, L24, L25, L26, M11, M24,
M25, M6, M8, N10, N11, P10, P25, P26, R9, T11, U11, W11, Y10, Y11
1. All grounds must be electrically connected at the board level. For fpBGA packages, the total number of GND balls is less than the actual
number of GND logic connections from the die to the common package GND plane.
2. NC pins should not be connected to any active signals, VCC or GND.
3. For package migration across device densities, the designer must comprehend the package pin requirements for the SERDES blocks.
Specifically, the SERDES power pins of the largest density device must be accounted to accommodate migration to other smaller devices
using the same package. Please refer to technical note TN1160, LatticeECP2/M Density Migration, for more details.
4-21
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 144 TQFP
LFE2-6E/SE
LFE2-12E/12SE
Pin
Number
Pin/Pad
Function
Bank
Dual Function
1
PL2A
7
VREF2_7
T (LVDS)*
PL2A
7
VREF2_7
T (LVDS)*
2
PL2B
7
VREF1_7
C (LVDS)*
PL2B
7
VREF1_7
C (LVDS)*
3
PL4A
7
T (LVDS)*
PL4A
7
T (LVDS)*
4
PL4B
7
C (LVDS)*
PL4B
7
C (LVDS)*
5
PL6A
7
6
VCCAUX
-
7
PL6B
7
LDQ10
8
PL8A
7
LDQ10
LDQ10
C (LVDS)*
9
VCCIO7
7
10
PL8B
7
11
GND
-
12
PL12A
7
13
PL12B
14
PL13A
15
LDQ10
Differential
T (LVDS)*
Pin/Pad
Function
Bank
PL6A
7
VCCAUX
-
C (LVDS)*
PL6B
T (LVDS)*
PL8A
Dual
Function
Differential
LDQ10
T (LVDS)*
7
LDQ10
C (LVDS)*
7
LDQ10
T (LVDS)*
LDQ10
C (LVDS)*
LDQ10
T (LVDS)*
C (LVDS)*
VCCIO7
7
PL8B
7
GND
-
PL12A
7
LDQ10
T (LVDS)*
7
LDQ10
C (LVDS)*
PL12B
7
LDQ10
7
PCLKT7_0/LDQ10
T
PL13A
7
PCLKT7_0/LDQ10
T
PL13B
7
PCLKC7_0/LDQ10
C
PL13B
7
PCLKC7_0/LDQ10
C
16
VCC
-
VCC
-
17
PL15A
6
PCLKT6_0
T (LVDS)*
PL15A
6
PCLKT6_0
T (LVDS)*
18
PL15B
6
PCLKC6_0
C (LVDS)*
PL15B
6
PCLKC6_0
C (LVDS)*
19
PL16A
6
VREF2_6
T
PL16A
6
VREF2_6
T
20
PL16B
6
VREF1_6
C
PL16B
6
VREF1_6
C
21
GND
-
GND
-
22
VCC
-
VCC
-
23
PL18A
6
LLM0_GDLLT_FB_A
T
PL18A
6
LLM0_GDLLT_FB_A
T
24
PL18B
6
LLM0_GDLLC_FB_A
C
PL18B
6
LLM0_GDLLC_FB_A
C
25
LLM0_PLLCAP
6
LLM0_PLLCAP
6
26
PL20A
6
LLM0_GPLLT_IN_A**
T (LVDS)*
PL20A
6
LLM0_GPLLT_IN_A**
T (LVDS)*
27
PL20B
6
LLM0_GPLLC_IN_A**
C (LVDS)*
PL20B
6
LLM0_GPLLC_IN_A**
C (LVDS)*
28
PL22A
6
PL22A
6
29
VCC
-
VCC
-
30
GND
-
GND
-
31
VCCIO6
6
VCCIO6
6
32
TCK
-
TCK
-
33
TDI
-
TDI
-
34
TDO
-
TDO
-
35
VCCJ
-
VCCJ
-
36
TMS
-
TMS
-
37
PB2A
5
VREF2_5/BDQ6
T
PB2A
5
VREF2_5/BDQ6
T
38
PB2B
5
VREF1_5/BDQ6
C
PB2B
5
VREF1_5/BDQ6
C
39
VCCAUX
-
40
PB4A
5
BDQ6
T
BDQ6
C
41
PB4B
5
42
VCCIO5
5
43
PB6A
5
BDQS6
44
PB6B
5
BDQ6
45
NC
5
VCCAUX
-
PB6A
5
BDQS6
T
BDQ6
C
PB6B
5
VCCIO5
5
T
PB12A
5
BDQ15
T
C
PB12B
5
BDQ15
C
PB16A
5
BDQ15
T
4-22
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 144 TQFP (Cont.)
LFE2-6E/SE
LFE2-12E/12SE
Pin
Number
Pin/Pad
Function
Pin/Pad
Function
Bank
Bank
Dual
Function
46
NC
Differential
5
PB16B
5
BDQ15
47
GND
C
-
GND
-
48
VCC
VCC
-
49
PB8A
5
PCLKT5_0/BDQ6
T
PB26A
5
PCLKT5_0/BDQ24
T
50
PB8B
5
PCLKC5_0/BDQ6
C
PB26B
5
PCLKC5_0/BDQ24
C
Dual Function
Differential
51
GND
-
GND
-
52
PB13A
4
PCLKT4_0/BDQ15
T
PB31A
4
PCLKT4_0/BDQ33
T
53
PB13B
4
PCLKC4_0/BDQ15
C
PB31B
4
PCLKC4_0/BDQ33
C
54
VCC
-
VCC
-
55
PB14A
4
BDQ15
T
PB34A
4
BDQ33
T
56
PB14B
4
BDQ15
C
PB34B
4
BDQ33
C
57
PB16A
4
BDQ15
T
PB40A
4
BDQ42
T
58
PB16B
4
BDQ15
C
PB40B
4
BDQ42
C
59
PB18A
4
BDQ15
T
PB44A
4
BDQ42
T
60
PB18B
4
BDQ15
C
PB44B
4
BDQ42
C
61
GND
-
GND
-
62
PB20A
4
BDQ24
T
PB48A
4
BDQ51
T
63
PB20B
4
BDQ24
C
PB48B
4
BDQ51
C
64
VCCIO4
4
VCCIO4
4
65
PB22A
4
BDQ24
T
PB50A
4
BDQ51
T
66
PB22B
4
BDQ24
C
PB50B
4
BDQ51
C
67
PB24A
4
BDQS24
T
PB52A
4
BDQ51
T
68
PB24B
4
BDQ24
C
PB52B
4
BDQ51
C
69
PB26A
4
BDQ24
T
PB54A
4
BDQ51
T
70
PB26B
4
BDQ24
C
PB54B
4
BDQ51
C
71
PB28A
4
VREF2_4/BDQ24
T
PB55A
4
VREF2_4/BDQ51
T
72
PB28B
4
VREF1_4/BDQ24
C
PB55B
4
VREF1_4/BDQ51
C
73
CFG1
8
CFG1
8
74
CFG2
8
CFG2
8
75
PROGRAMN
8
PROGRAMN
8
76
INITN
8
INITN
8
77
CFG0
8
CFG0
8
78
CCLK
8
CCLK
8
79
DONE
8
80
PR29A
8
81
GND
-
82
PR26A
8
83
VCC
-
84
PR25B
8
85
VCCIO8
8
86
PR25A
87
88
DONE
8
D0/SPIFASTN
PR29A
8
GND
-
D6
PR26A
8
VCC
-
PR25B
8
D0/SPIFASTN
D6
D7
C
VCCIO8
8
8
DI/CSSPI0N
T
PR25A
8
DI/CSSPI0N
T
PR24B
8
DOUT/CSON
C
PR24B
8
DOUT/CSON
C
PR24A
8
BUSY/SISPI
T
PR24A
8
BUSY/SISPI
T
89
VCCIO3
3
VCCIO3
3
90
VCCAUX
-
VCCAUX
-
4-23
D7
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 144 TQFP (Cont.)
LFE2-6E/SE
Pin
Number
Pin/Pad
Function
Bank
Dual Function
91
PR20B
3
92
PR20A
3
93
RLM0_PLLCAP
3
94
VCC
95
GND
96
PR17B
3
RLM0_GDLLC_IN_A**
97
PR17A
3
98
PR16B
99
PR16A
100
101
LFE2-12E/12SE
Differential
Pin/Pad
Function
Bank
Dual
Function
Differential
RLM0_GPLLC_IN_A**
C (LVDS)*
PR20B
3
RLM0_GPLLC_IN_A**
C (LVDS)*
RLM0_GPLLT_IN_A**
T (LVDS)*
PR20A
3
RLM0_GPLLT_IN_A**
T (LVDS)*
RLM0_PLLCAP
3
-
VCC
-
-
GND
-
C (LVDS)*
PR17B
3
RLM0_GDLLC_IN_A**
C (LVDS)*
RLM0_GDLLT_IN_A**
T (LVDS)*
PR17A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
3
VREF2_3
C
PR16B
3
VREF2_3
C
3
VREF1_3
T
PR16A
3
VREF1_3
T
PR15B
3
PCLKC3_0
C (LVDS)*
PR15B
3
PCLKC3_0
C (LVDS)*
PR15A
3
PCLKT3_0
T (LVDS)*
PR15A
3
PCLKT3_0
T (LVDS)*
102
VCC
-
VCC
-
103
PR13B
2
PCLKC2_0/RDQ10
C
PR13B
2
PCLKC2_0/RDQ10
C
104
PR13A
2
PCLKT2_0/RDQ10
T
PR13A
2
PCLKT2_0/RDQ10
T
105
GND
-
GND
-
106
VCCIO2
2
VCCIO2
2
107
PR2B
2
VREF2_2
C (LVDS)*
PR2B
2
VREF2_2
C (LVDS)*
108
PR2A
2
VREF1_2
T (LVDS)*
PR2A
2
VREF1_2
T (LVDS)*
109
PT28B
1
VREF2_1
C
PT55B
1
VREF2_1
C
110
PT28A
1
VREF1_1
T
PT55A
1
VREF1_1
111
PT26B
1
C
PT54B
1
112
PT26A
1
T
PT54A
1
T
113
PT24B
1
C
PT52B
1
C
114
PT24A
1
T
PT52A
1
T
115
PT22B
1
C
PT50B
1
C
T
T
116
PT22A
1
117
VCCIO1
1
118
PT20B
1
119
PT20A
1
120
GND
-
121
PT18B
1
122
PT18A
1
123
PT16A
1
T
C
PT50A
1
VCCIO1
1
C
PT48B
1
C
T
PT48A
1
T
GND
-
C
PT44B
1
T
PT44A
1
T
PT40B
1
C
C
124
NC
1
PT40A
1
T
125
PT14B
1
C
PT34B
1
C
126
PT14A
1
T
PT34A
1
T
127
NC
1
NC
1
128
VCC
-
129
PT12B
1
130
PT12A
1
PCLKT1_0
T
PT30A
1
PCLKT1_0
T
131
PT10B
0
PCLKC0_0
C
PT28B
0
PCLKC0_0
C
132
XRES
0
XRES
0
133
GND
-
GND
-
134
PT10A
0
PT28A
0
PCLKT0_0
T
135
VCC
-
VCC
-
PCLKC1_0
PCLKT0_0
C
T
4-24
VCC
-
PT30B
1
PCLKC1_0
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 144 TQFP (Cont.)
LFE2-6E/SE
Pin
Number
Pin/Pad
Function
Bank
136
PT6B
137
LFE2-12E/12SE
Differential
Pin/Pad
Function
Bank
0
C
PT16B
0
C
PT6A
0
T
PT16A
0
T
138
GND
-
GND
-
139
VCCIO0
0
VCCIO0
0
140
PT4B
0
C
PT6B
0
C
141
PT4A
0
T
PT6A
0
T
142
VCCAUX
-
VCCAUX
-
143
PT2B
0
VREF2_0
C
PT2B
0
VREF2_0
C
144
PT2A
0
VREF1_0
T
PT2A
0
VREF1_0
T
Dual Function
Dual
Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one-to-one
connection with a package ball or pin.
4-25
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 208 PQFP
LFE2-12E/SE
Pin
Number
Pin/Pad
Function
1
LFE2-20E/SE
Bank
Dual
Function
Differential
Pin/Pad
Function
Bank
Dual
Function
PL2A
7
Differential
VREF2_7
T (LVDS)*
PL2A
7
VREF2_7
T (LVDS)*
2
PL2B
7
3
PL4A
7
VREF1_7
C (LVDS)*
PL2B
7
VREF1_7
C (LVDS)*
T (LVDS)*
PL6A
7
LDQ8
4
PL4B
7
T (LVDS)*
C (LVDS)*
PL6B
7
LDQ8
C (LVDS)*
5
GND
-
GND
-
6
PL6A
7
7
VCCAUX
-
LDQ16
T (LVDS)*
8
PL6B
7
LDQ10
9
PL8A
7
LDQ10
10
VCCIO7
7
11
PL8B
7
LDQ10
C (LVDS)*
12
VCC
-
LDQ10
T (LVDS)*
PL12A
7
VCCAUX
-
C (LVDS)*
PL12B
7
LDQ16
C (LVDS)*
T (LVDS)*
PL14A
7
LDQ16
T (LVDS)*
VCCIO7
7
PL14B
7
LDQ16
C (LVDS)*
VCC
-
13
GND
-
GND
-
14
VCCIO7
7
VCCIO7
7
15
PL12A
7
LDQ10
T (LVDS)*
PL18A
7
LDQ16
T (LVDS)*
16
PL12B
7
LDQ10
C (LVDS)*
PL18B
7
LDQ16
C (LVDS)*
GND
-
PCLKT7_0/LDQ10
T
PL19A
7
PCLKT7_0/LDQ16
T
17
GND
-
18
PL13A
7
19
VCC
-
VCC
-
20
PL13B
7
PCLKC7_0/LDQ10
C
PL19B
7
PCLKC7_0/LDQ16
C
21
PL15A
6
PCLKT6_0
T (LVDS)*
PL21A
6
PCLKT6_0/LDQ25
T (LVDS)*
22
PL15B
6
PCLKC6_0
C (LVDS)*
PL21B
6
PCLKC6_0/LDQ25
C (LVDS)*
23
PL16A
6
VREF2_6
T
PL22A
6
VREF2_6/LDQ25
T
24
PL16B
6
VREF1_6
C
PL22B
6
VREF1_6/LDQ25
C
25
GND
-
GND
-
26
PL17A
6
LLM0_GDLLT_IN_A**
T (LVDS)*
PL27A
6
LLM0_GDLLT_IN_A**/LDQ25
T (LVDS)*
27
PL17B
6
LLM0_GDLLC_IN_A**
C (LVDS)*
PL27B
6
LLM0_GDLLC_IN_A**/LDQ25
C (LVDS)*
LLM0_GPLLT_IN_A**/LDQ34
T (LVDS)*
28
VCC
-
VCC
-
29
LLM0_PLLCAP
6
LLM0_PLLCAP
6
30
VCCAUX
-
31
PL20A
6
32
GND
-
33
PL21A
6
LLM0_GPLLT_FB_A
34
PL20B
6
LLM0_GPLLC_IN_A**
35
PL21B
6
LLM0_GPLLC_FB_A
C
36
PL23A
6
37
PL24A
6
38
VCCIO6
6
39
PL24B
6
40
VCC
-
41
PL26A
6
42
GND
-
43
PL26B
6
44
VCCIO6
6
45
PL28A
6
LLM0_GPLLT_IN_A**
LDQ28
LDQ28
VCCAUX
-
PL30A
6
GND
-
T
PL31A
6
LLM0_GPLLT_FB_A/LDQ34
T
C (LVDS)*
PL30B
6
LLM0_GPLLC_IN_A**/LDQ34
C (LVDS)*
PL31B
6
LLM0_GPLLC_FB_A/LDQ34
C
PL33A
6
LDQ34
LDQ42
T (LVDS)*
LDQ42
C (LVDS)*
LDQ42
T (LVDS)*
LDQ42
C (LVDS)*
LDQS42
T (LVDS)*
T (LVDS)*
T (LVDS)*
C (LVDS)*
PL38A
6
VCCIO6
6
PL38B
6
VCC
6
LDQ28
T (LVDS)*
PL40A
GND
-
LDQ28
C (LVDS)*
PL40B
6
VCCIO6
6
PL42A
6
LDQS28
T (LVDS)*
4-26
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 208 PQFP (Cont.)
LFE2-12E/SE
LFE2-20E/SE
Pin
Number
Pin/Pad
Function
Bank
Dual
Function
Differential
Pin/Pad
Function
Bank
Dual
Function
Differential
46
PL28B
6
LDQ28
C (LVDS)*
PL42B
6
LDQ42
C (LVDS)*
47
PL30A
6
LDQ28
PL44A
6
LDQ42
48
TCK
-
TCK
-
49
TDI
-
TDI
-
50
TDO
-
TDO
-
51
VCCJ
-
VCCJ
-
52
TMS
-
TMS
-
53
PB2A
5
VREF2_5/BDQ6
T
PB2A
5
VREF2_5/BDQ6
T
54
PB2B
5
VREF1_5/BDQ6
C
PB2B
5
VREF1_5/BDQ6
C
55
VCCIO5
5
VCCIO5
5
56
PB6A
5
BDQS6
T
PB6A
5
BDQS6
T
57
PB6B
5
BDQ6
C
PB6B
5
BDQ6
C
58
PB8A
5
BDQ6
T
PB8A
5
BDQ6
T
59
PB8B
5
BDQ6
C
PB8B
5
BDQ6
C
60
GND
-
GND
-
61
PB12A
5
BDQ15
T
PB12A
5
BDQ15
T
62
PB12B
5
BDQ15
C
PB12B
5
BDQ15
C
63
VCCIO5
5
VCCIO5
5
64
PB16A
5
BDQ15
T
PB16A
5
BDQ15
T
65
PB16B
5
BDQ15
C
PB16B
5
BDQ15
C
66
PB18A
5
BDQ15
T
PB18A
5
BDQ15
T
67
PB18B
5
BDQ15
C
PB18B
5
BDQ15
C
GND
-
BDQ24
T
PB30A
5
BDQ33
T
VCCAUX
-
C
PB30B
5
BDQ33
C
68
GND
-
69
PB20A
5
70
VCCAUX
-
71
PB20B
5
BDQ24
72
PB22A
5
BDQ24
T
PB32A
5
BDQ33
T
73
PB22B
5
BDQ24
C
PB32B
5
BDQ33
C
74
VCC
-
VCC
-
75
PB26A
5
PCLKT5_0/BDQ24
T
PB35A
5
PCLKT5_0/BDQ33
T
76
PB26B
5
PCLKC5_0/BDQ24
C
PB35B
5
PCLKC5_0/BDQ33
C
77
GND
-
GND
-
78
PB31A
4
PCLKT4_0/BDQ33
T
PB40A
4
PCLKT4_0/BDQ42
T
79
PB31B
4
PCLKC4_0/BDQ33
C
PB40B
4
PCLKC4_0/BDQ42
C
80
VCC
-
VCC
-
81
GND
-
GND
-
82
PB34A
4
BDQ33
T
PB42A
4
BDQS42
T
83
PB34B
4
BDQ33
C
PB42B
4
BDQ42
C
84
PB36A
4
BDQ33
T
PB44A
4
BDQ42
T
85
PB36B
4
BDQ33
C
BDQ42
C
86
VCCAUX
-
87
PB40A
4
BDQ42
88
PB40B
4
BDQ42
89
GND
-
90
PB42A
4
BDQS42
T
PB52A
4
BDQ51
T
91
PB42B
4
BDQ42
C
PB52B
4
BDQ51
C
PB44B
4
VCCAUX
-
T
PB50A
4
BDQ51
T
C
PB50B
4
BDQ51
C
GND
-
4-27
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 208 PQFP (Cont.)
LFE2-12E/SE
LFE2-20E/SE
Pin
Number
Pin/Pad
Function
Bank
Dual
Function
Differential
Pin/Pad
Function
Bank
Dual
Function
Differential
92
PB44A
4
BDQ42
T
PB54A
4
BDQ51
T
93
VCCIO4
4
VCCIO4
4
94
PB44B
4
BDQ42
C
PB54B
4
BDQ51
C
95
PB48A
4
BDQ51
T
PB58A
4
BDQ60
T
96
PB48B
4
BDQ51
C
PB58B
4
BDQ60
C
97
VCC
-
VCC
-
98
PB52A
4
BDQ51
T
PB60A
4
BDQS60
T
99
PB52B
4
BDQ51
C
PB60B
4
BDQ60
C
100
VCCIO4
4
VCCIO4
4
101
PB54A
4
PB63A
4
102
GND
-
GND
-
103
PB55A
4
VREF2_4/BDQ51
T
PB64A
4
VREF2_4/BDQ60
T
104
PB55B
4
VREF1_4/BDQ51
C
PB64B
4
VREF1_4/BDQ60
C
105
CFG1
8
CFG1
8
106
PROGRAMN
8
PROGRAMN
8
107
CFG2
8
CFG2
8
108
INITN
8
INITN
8
8
BDQ51
109
CFG0
8
CFG0
110
CCLK
8
CCLK
8
111
DONE
8
DONE
8
112
PR29A
8
113
VCCIO8
8
114
PR26A
8
115
GND
-
116
VCC
-
117
PR25B
8
118
VCCIO8
8
119
PR25A
120
D0/SPIFASTN
D6
PR43A
8
VCCIO8
8
PR40A
8
GND
-
BDQ60
D0/SPIFASTN
D6
VCC
-
PR39B
8
VCCIO8
8
PR39A
8
DI/CSSPI0N
T
C
PR38B
8
DOUT/CSON
C
T
PR38A
8
BUSY/SISPI
T
GND
-
VCCIO3
3
PR31A
3
VCCAUX
-
PR30B
3
RLM0_GPLLC_IN_A**/RDQ34
C (LVDS)*
PR30A
3
RLM0_GPLLT_IN_A**/RDQ34
T (LVDS)*
RLM0_PLLCAP
3
C
D7
C
8
DI/CSSPI0N
T
PR24B
8
DOUT/CSON
121
PR24A
8
BUSY/SISPI
122
GND
-
123
VCCIO3
3
124
PR21A
3
125
VCCAUX
-
126
PR20B
3
RLM0_GPLLC_IN_A**
C (LVDS)*
127
PR20A
3
RLM0_GPLLT_IN_A**
T (LVDS)*
128
RLM0_PLLCAP
3
RLM0_GPLLT_FB_A
D7
C
RLM0_GPLLT_FB_A/RDQ34
129
VCC
-
130
PR18B
3
VCC
-
C
PR28B
3
RLM0_GDLLC_FB_A/RDQ25
131
PR18A
3
132
PR17B
3
RLM0_GDLLT_FB_A
T
PR28A
3
RLM0_GDLLT_FB_A**/RDQ25
T
RLM0_GDLLC_IN_A**
C (LVDS)*
PR27B
3
RLM0_GDLLC_IN_A/RDQ25
C (LVDS)*
133
PR17A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
134
PR16B
3
VREF2_3
C
PR27A
3
RLM0_GDLLT_IN_A**/RDQ25
T (LVDS)*
PR22B
3
VREF2_3/RDQ25
135
VCCIO3
3
VCCIO3
3
C
136
PR16A
3
VREF1_3
T
PR22A
3
VREF1_3/RDQ25
T
137
PR15B
3
PCLKC3_0
C (LVDS)*
PR21B
3
PCLKC3_0/RDQ25
C (LVDS)*
RLM0_GDLLC_FB_A
4-28
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 208 PQFP (Cont.)
LFE2-12E/SE
LFE2-20E/SE
Pin
Number
Pin/Pad
Function
Bank
Dual
Function
Differential
Pin/Pad
Function
Bank
Dual
Function
Differential
138
PR15A
3
PCLKT3_0
T (LVDS)*
PR21A
3
PCLKT3_0/RDQ25
T (LVDS)*
139
GND
-
GND
-
140
VCC
-
141
PR13B
2
PCLKC2_0/RDQ10
C
PCLKT2_0/RDQ10
T
142
PR13A
2
143
VCCIO2
2
144
PR12A
2
145
GND
-
RDQ10
VCC
-
PR19B
2
PCLKC2_0/RDQ16
C
PCLKT2_0/RDQ16
T
PR19A
2
VCCIO2
2
PR16A
2
GND
-
RDQS16
146
VCC
-
147
PR8B
2
148
VCCIO2
2
149
PR8A
2
RDQ10
150
PR6B
2
RDQ10
151
VCCAUX
-
VCCAUX
-
152
PR6A
2
RDQ10
T (LVDS)*
PR12A
2
RDQ16
T (LVDS)*
153
PR4B
2
C (LVDS)*
PR6B
2
RDQ8
C (LVDS)*
154
PR4A
2
T (LVDS)*
PR6A
2
RDQ8
T (LVDS)*
155
PR2B
2
VREF2_2
C (LVDS)*
PR2B
2
VREF2_2
C (LVDS)*
156
PR2A
2
VREF1_2
T (LVDS)*
PR2A
2
VREF1_2
T (LVDS)*
157
PT55B
1
VREF2_1
C
PT64B
1
VREF2_1
C
158
PT55A
1
VREF1_1
T
PT64A
1
VREF1_1
T
159
GND
-
GND
-
160
PT54B
1
C
PT62B
1
C
161
PT54A
1
T
PT62A
1
T
162
VCCIO1
1
VCCIO1
1
163
PT52B
1
C
PT60B
1
164
PT52A
1
T
PT60A
1
T
165
PT50B
1
C
PT58B
1
C
166
PT50A
1
T
PT58A
1
T
167
PT48B
1
C
PT56B
1
C
168
PT48A
1
T
PT56A
1
T
RDQ10
VCC
-
PR14B
2
VCCIO2
2
T (LVDS)*
PR14A
2
RDQ16
T (LVDS)*
C (LVDS)*
PR12B
2
RDQ16
C (LVDS)*
C (LVDS)*
169
GND
-
GND
-
170
VCCIO1
1
VCCIO1
1
171
VCC
-
172
PT40B
1
C
173
PT40A
1
T
174
VCCAUX
-
175
GND
-
176
PT36B
1
177
PT36A
178
PT34B
179
PT34A
1
180
PT30B
1
PCLKC1_0
181
PT30A
1
PCLKT1_0
182
XRES
1
183
PT28B
0
PCLKC0_0
RDQ16
C (LVDS)*
C
VCC
-
PT50B
1
C
PT50A
1
T
VCCAUX
-
GND
-
C
PT44B
1
1
T
PT44A
1
T
1
C
PT42B
1
C
T
PT42A
1
C
PT39B
1
PCLKC1_0
C
T
PT39A
1
PCLKT1_0
T
XRES
1
C
PT37B
0
PCLKC0_0
C
4-29
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 208 PQFP (Cont.)
LFE2-12E/SE
Pin
Number
Pin/Pad
Function
Bank
184
GND
-
185
PT28A
0
T
PT37A
0
186
PT26B
0
C
PT36B
0
C
187
PT26A
0
T
PT36A
0
T
VCC
-
C
PT30B
0
VCCAUX
-
T
PT30A
0
188
VCC
-
189
PT20B
0
190
VCCAUX
-
191
PT20A
0
Dual
Function
LFE2-20E/SE
PCLKT0_0
Differential
Pin/Pad
Function
Bank
GND
-
Dual
Function
PCLKT0_0
Differential
T
C
T
192
GND
-
GND
-
193
PT18B
0
C
PT26B
0
C
194
PT18A
0
T
PT26A
0
T
195
VCCIO0
0
VCCIO0
0
196
PT16B
0
C
PT20B
0
C
197
PT16A
0
T
PT20A
0
T
198
VCC
-
VCC
-
199
PT12B
0
C
PT12B
0
C
200
PT12A
0
T
PT12A
0
T
201
GND
-
GND
-
202
PT8B
0
C
PT8B
0
203
PT8A
0
T
PT8A
0
T
204
PT6B
0
C
PT6B
0
C
205
PT6A
0
T
PT6A
0
T
206
VCCIO0
0
VCCIO0
0
207
PT2B
0
VREF2_0
C
PT2B
0
VREF2_0
C
208
PT2A
0
VREF1_0
T
PT2A
0
VREF1_0
T
C
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-30
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA
LFE2-6E/SE
LFE2-12E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
C3
PL2A
7
VREF2_7
T (LVDS)*
PL2A
7
VREF2_7
T (LVDS)*
C2
PL2B
7
VREF1_7
C (LVDS)*
PL2B
7
VREF1_7
C (LVDS)*
VCCIO
VCCIO7
7
VCCIO7
7
-
-
-
-
-
D3
PL5A
7
T
PL5A
7
T
D4
PL4A
7
T (LVDS)*
PL4A
7
T (LVDS)*
C
C
D2
PL5B
7
GND
GNDIO7
-
E4
PL4B
7
B1
PL7A
7
LDQ10
C1
PL7B
7
F5
PL9A
7
VCCIO
VCCIO7
7
F4
PL8A
G6
G4
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
PL5B
7
GNDIO7
-
C (LVDS)*
PL4B
7
T
PL7A
7
LDQ10
T
LDQ10
C
PL7B
7
LDQ10
C
LDQ10
T
PL9A
7
LDQ10
T
VCCIO7
7
7
LDQ10
T (LVDS)*
PL8A
7
LDQ10
T (LVDS)*
PL9B
7
LDQ10
C
PL9B
7
LDQ10
C
PL8B
7
LDQ10
C (LVDS)*
PL8B
7
LDQ10
C (LVDS)*
LDQS10
T (LVDS)*
LDQS10
T (LVDS)*
D1
PL10A
7
GND
GNDIO7
-
E1
PL10B
7
LDQ10
F3
PL11A
7
LDQ10
LDQ10
C
C (LVDS)*
PL10A
7
GNDIO7
-
C (LVDS)*
PL10B
7
LDQ10
C (LVDS)*
T
PL11A
7
LDQ10
T
PL11B
7
LDQ10
C
VCCIO7
7
G3
PL11B
7
VCCIO
VCCIO7
7
F2
PL12A
7
LDQ10
T (LVDS)*
PL12A
7
LDQ10
T (LVDS)*
F1
PL12B
7
LDQ10
C (LVDS)*
PL12B
7
LDQ10
C (LVDS)*
GND
GNDIO7
-
GNDIO7
-
G2
PL13A
7
PCLKT7_0/LDQ10
T
PL13A
7
PCLKT7_0/LDQ10
T
G1
PL13B
7
PCLKC7_0/LDQ10
C
PL13B
7
PCLKC7_0/LDQ10
C
H6
PL15A
6
PCLKT6_0
T (LVDS)*
PL15A
6
PCLKT6_0
T (LVDS)*
VCCIO
VCCIO6
6
VCCIO6
6
H5
PL15B
6
PCLKC6_0
C (LVDS)*
PL15B
6
PCLKC6_0
C (LVDS)*
H4
PL16A
6
VREF2_6
T
PL16A
6
VREF2_6
T
GND
GNDIO6
-
GNDIO6
-
H3
PL16B
6
VREF1_6
C
PL16B
6
VREF1_6
C
H2
PL17A
6
LLM0_GDLLT_IN_A**
T (LVDS)*
PL17A
6
LLM0_GDLLT_IN_A**
T (LVDS)*
LLM0_GDLLC_IN_A**
C (LVDS)*
PL17B
6
LLM0_GDLLC_IN_A**
C (LVDS)*
VCC
-
H1
PL17B
6
G10
VCC
-
J4
PL18A
6
LLM0_GDLLT_FB_A
T
PL18A
6
LLM0_GDLLT_FB_A
T
J5
PL18B
6
LLM0_GDLLC_FB_A
C
PL18B
6
LLM0_GDLLC_FB_A
C
LLM0_GPLLT_IN_A**
T (LVDS)*
LLM0_GPLLT_IN_A**
T (LVDS)*
J6
LLM0_PLLCAP
6
K4
PL20A
6
GND
GNDIO6
-
GNDIO6
-
J1
PL21A
6
LLM0_GPLLT_FB_A
T
PL21A
6
LLM0_GPLLT_FB_A
T
K3
PL20B
6
LLM0_GPLLC_IN_A**
C (LVDS)*
PL20B
6
LLM0_GPLLC_IN_A**
C (LVDS)*
VCCIO
VCCIO6
6
VCCIO6
6
J2
PL21B
6
PL21B
6
LLM0_GPLLC_FB_A
C
LLM0_GPLLC_FB_A
C
4-31
LLM0_PLLCAP
6
PL20A
6
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-6E/SE
Ball
Number
Ball/Pad
Function
Bank
GND
GNDIO6
-
Dual Function
LFE2-12E/SE
Differential
Ball/Pad
Function
Bank
GNDIO6
-
Dual Function
Differential
L2
PL24A
6
LDQ28
T (LVDS)*
PL24A
6
LDQ28
T (LVDS)*
K2
PL25A
6
LDQ28
T
PL25A
6
LDQ28
T
L3
PL24B
6
LDQ28
C (LVDS)*
PL24B
6
LDQ28
C (LVDS)*
K1
PL25B
6
LDQ28
C
PL25B
6
LDQ28
C
VCCIO
VCCIO6
6
VCCIO6
6
L4
PL26A
6
LDQ28
PL26A
6
LDQ28
T (LVDS)*
L1
PL27A
6
LDQ28
T
PL27A
6
LDQ28
T
L5
PL26B
6
LDQ28
C (LVDS)*
PL26B
6
LDQ28
C (LVDS)*
LDQ28
C
PL27B
6
LDQ28
C
GNDIO6
-
T (LVDS)*
M1
PL27B
6
GND
GNDIO6
-
N1
PL29A
6
LDQ28
T
PL29A
6
LDQ28
T
N2
PL28A
6
LDQS28
T (LVDS)*
PL28A
6
LDQS28
T (LVDS)*
LDQ28
C
LDQ28
C
P1
PL29B
6
VCCIO
VCCIO6
6
PL29B
6
VCCIO6
6
P2
PL28B
6
LDQ28
C (LVDS)*
PL28B
6
LDQ28
C (LVDS)*
R1
PL30A
6
LDQ28
T (LVDS)*
PL30A
6
LDQ28
T (LVDS)*
GND
GNDIO6
-
GNDIO6
-
R2
PL30B
6
PL30B
6
LDQ28
C (LVDS)*
T
LDQ28
C (LVDS)*
N4
TDI
-
TDI
-
M4
TCK
-
TCK
-
P3
TDO
-
TDO
-
N3
TMS
-
TMS
-
K7
VCCJ
-
M5
PB2A
5
VCCJ
-
PB2A
5
K6
NC
-
VREF2_5/BDQ6
PB3A
5
BDQ6
M6
PB2B
5
PB2B
5
VREF1_5/BDQ6
R3
NC
P4
NC
-
PB5A
5
BDQ6
T
-
PB5B
5
BDQ6
C
-
-
-
VCCIO
5
-
-
-
GNDIO5
5
N5
PB3A
5
BDQ6
T
PB21A
5
BDQ24
T
N6
PB3B
5
BDQ6
C
PB21B
5
BDQ24
C
VREF2_5/BDQ6
VREF1_5/BDQ6
T
C
C
T2
PB4A
5
BDQ6
T
PB22A
5
BDQ24
T
P6
PB5A
5
BDQ6
T
PB23A
5
BDQ24
T
VCCIO
VCCIO5
5
VCCIO5
5
T3
PB4B
5
BDQ6
C
PB22B
5
BDQ24
C
R6
PB5B
5
BDQ6
C
PB23B
5
BDQ24
C
GND
GNDIO5
-
GNDIO5
-
R4
PB6A
5
BDQS6
T
PB24A
5
BDQS24
T
L6
PB7A
5
BDQ6
T
PB25A
5
BDQ24
T
T4
PB6B
5
BDQ6
C
PB24B
5
BDQ24
C
L7
PB7B
5
BDQ6
C
PB25B
5
BDQ24
C
PCLKT5_0/BDQ6
T
PB26A
5
PCLKT5_0/BDQ24
T
VCCIO5
5
N7
PB8A
5
VCCIO
VCCIO5
5
4-32
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-6E/SE
LFE2-12E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
M8
PB8B
5
PCLKC5_0/BDQ6
Bank
Dual Function
Differential
C
PB26B
5
PCLKC5_0/BDQ24
GND
GNDIO5
-
C
GNDIO5
-
P7
PB13A
4
PCLKT4_0/BDQ15
T
PB31A
4
PCLKT4_0/BDQ33
T
PCLKC4_0/BDQ15
C
PB31B
4
PCLKC4_0/BDQ33
C
VCCIO4
4
R8
PB13B
4
VCCIO
VCCIO4
4
T5
PB14A
4
BDQ15
T
PB32A
4
BDQ33
T
T6
PB14B
4
BDQ15
C
PB32B
4
BDQ33
C
BDQS15
T
PB33A
4
BDQS33
T
GNDIO4
-
T8
PB15A
4
GND
GNDIO4
-
R7
PB16A
4
BDQ15
T
PB34A
4
BDQ33
T
T9
PB15B
4
BDQ15
C
PB33B
4
BDQ33
C
T7
PB16B
4
BDQ15
C
PB34B
4
BDQ33
C
L8
PB17A
4
BDQ15
T
PB35A
4
BDQ33
T
VCCIO
VCCIO4
4
VCCIO4
4
P8
PB18A
4
PB36A
4
BDQ33
T
BDQ15
T
L9
PB17B
4
BDQ15
C
PB35B
4
BDQ33
C
N8
PB18B
4
BDQ15
C
PB36B
4
BDQ33
C
BDQ15
T
BDQ33
T
BDQ33
C
T
R9
PB19A
4
GND
GNDIO4
-
R10
PB19B
4
-
-
-
BDQ15
-
-
-
N9
PB20A
4
BDQ24
T10
PB21A
4
M9
PB20B
4
R11
PB21B
P10
PB22A
C
PB37A
4
GNDIO4
-
PB37B
4
VCCIO
4
GNDIO4
4
T
PB47A
4
BDQ51
BDQ24
T
PB48A
4
BDQ51
T
BDQ24
C
PB47B
4
BDQ51
C
4
BDQ24
C
PB48B
4
BDQ51
C
4
BDQ24
T
PB49A
4
BDQ51
T
BDQ24
T
BDQ51
T
N11
PB23A
4
VCCIO
VCCIO4
4
PB50A
4
VCCIO4
4
N10
PB22B
4
BDQ24
P11
PB23B
4
BDQ24
C
PB49B
4
BDQ51
C
C
PB50B
4
BDQ51
C
BDQS24
T
PB51A
4
BDQS51
T
GNDIO4
-
T11
PB24A
4
GND
GNDIO4
-
M11
PB25A
4
BDQ24
T
PB52A
4
BDQ51
T
T12
PB24B
4
BDQ24
C
PB51B
4
BDQ51
C
C
L11
PB25B
4
BDQ24
C
PB52B
4
BDQ51
T13
PB26A
4
BDQ24
T
PB53A
4
BDQ51
T
R13
PB27A
4
BDQ24
T
PB54A
4
BDQ51
T
VCCIO
VCCIO4
4
VCCIO4
4
T14
PB26B
4
BDQ24
C
PB53B
4
BDQ51
C
P13
PB27B
4
BDQ24
C
PB54B
4
BDQ51
C
GND
GNDIO4
-
GNDIO4
-
N12
PB28A
4
VREF2_4/BDQ24
T
PB55A
4
VREF2_4/BDQ51
T
M12
PB28B
4
VREF1_4/BDQ24
C
PB55B
4
VREF1_4/BDQ51
C
R15
CFG2
8
CFG2
8
4-33
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-6E/SE
Ball
Number
Ball/Pad
Function
Bank
N14
CFG1
N13
N15
LFE2-12E/SE
Ball/Pad
Function
Bank
8
CFG1
8
PROGRAMN
8
PROGRAMN
8
CFG0
8
CFG0
8
P15
PR30B
8
PR30B
8
L12
INITN
8
INITN
8
N16
PR29B
8
PR29B
8
GND
GNDIO8
-
GNDIO8
-
R14
CCLK
8
P14
PR30A
8
M13
DONE
8
R16
PR28B
8
VCCIO
VCCIO8
8
M16
PR29A
P16
Dual Function
WRITEN
CSN
CS1N
Differential
C
C
T
CCLK
8
PR30A
8
DONE
8
PR28B
8
Dual Function
Differential
WRITEN
C
CSN
C
CS1N
T
D1
C
T
D1
C
VCCIO8
8
8
D0/SPIFASTN
T
PR29A
8
D0/SPIFASTN
PR28A
8
D2
T
PR28A
8
D2
T
L15
PR27B
8
D3
C
PR27B
8
D3
C
GND
GNDIO8
-
GNDIO8
-
L14
PR26A
8
D6
T
PR26A
8
D6
T
L16
PR27A
8
D4
T
PR27A
8
D4
T
L10
PR25B
8
D7
C
PR25B
8
D7
C
D5
C
PR26B
8
D5
C
VCCIO8
8
L13
PR26B
8
VCCIO
VCCIO8
8
K11
PR25A
8
DI/CSSPI0N
T
PR25A
8
DI/CSSPI0N
T
K14
PR24B
8
DOUT/CSON
C
PR24B
8
DOUT/CSON
C
K13
PR24A
8
BUSY/SISPI
T
BUSY/SISPI
T
GND
GNDIO8
-
RLM0_GPLLC_FB_A
C
RLM0_GPLLT_FB_A
T
K15
PR21B
3
VCCIO
VCCIO3
3
RLM0_GPLLC_FB_A
RLM0_GPLLT_FB_A
C
T
PR24A
8
GNDIO8
-
PR21B
3
VCCIO3
3
K16
PR21A
3
GND
GNDIO3
-
PR21A
3
GNDIO3
-
J16
PR20B
3
RLM0_GPLLC_IN_A**
J15
PR20A
3
RLM0_GPLLT_IN_A**
C (LVDS)*
PR20B
3
RLM0_GPLLC_IN_A**
C (LVDS)*
T (LVDS)*
PR20A
3
RLM0_GPLLT_IN_A**
T (LVDS)*
J14
RLM0_PLLCAP
3
RLM0_PLLCAP
3
J13
PR18B
3
RLM0_GDLLC_FB_A
C
PR18B
3
J12
PR18A
3
RLM0_GDLLT_FB_A
T
RLM0_GDLLC_FB_A
C
PR18A
3
RLM0_GDLLT_FB_A
H12
PR17B
3
RLM0_GDLLC_IN_A**
C (LVDS)*
T
PR17B
3
RLM0_GDLLC_IN_A**
C (LVDS)*
GND
GNDIO3
-
GNDIO3
-
H13
PR17A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
PR17A
3
H15
PR16B
3
VREF2_3
C
RLM0_GDLLT_IN_A**
T (LVDS)*
PR16B
3
VREF2_3
VCCIO
VCCIO3
3
C
VCCIO3
3
H16
PR16A
3
VREF1_3
T
PR16A
3
VREF1_3
T
H11
PR15B
3
PCLKC3_0
C (LVDS)*
PR15B
3
PCLKC3_0
C (LVDS)*
J11
PR15A
3
PCLKT3_0
T (LVDS)*
PR15A
3
PCLKT3_0
T (LVDS)*
G16
PR13B
2
PCLKC2_0/RDQ10
C
PR13B
2
PCLKC2_0/RDQ10
C
GND
GNDIO2
-
G15
PR13A
2
PCLKT2_0/RDQ10
T
PCLKT2_0/RDQ10
T
4-34
GNDIO2
-
PR13A
2
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-6E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
F15
PR11B
2
RDQ10
G11
PR12B
2
F14
PR11A
2
VCCIO
VCCIO2
2
F12
PR12A
G14
LFE2-12E/SE
Differential
Ball/Pad
Function
Bank
Dual Function
C
PR11B
2
RDQ10
C
RDQ10
C (LVDS)*
PR12B
2
RDQ10
C (LVDS)*
RDQ10
T
PR11A
2
RDQ10
T
VCCIO2
2
2
RDQ10
T (LVDS)*
PR12A
2
RDQ10
T (LVDS)*
PR10B
2
RDQ10
C (LVDS)*
PR10B
2
RDQ10
C (LVDS)*
G13
PR10A
2
RDQS10
T (LVDS)*
PR10A
2
RDQS10
T (LVDS)*
GND
GNDIO2
-
GNDIO2
-
F16
PR8B
2
RDQ10
C (LVDS)*
PR8B
2
RDQ10
C (LVDS)*
F9
PR9B
2
RDQ10
C
PR9B
2
RDQ10
C
E16
PR8A
2
RDQ10
T (LVDS)*
PR8A
2
RDQ10
T (LVDS)*
RDQ10
T
PR9A
2
RDQ10
T
VCCIO2
2
Differential
F10
PR9A
2
VCCIO
VCCIO2
2
D16
PR7B
2
RDQ10
C
PR7B
2
RDQ10
C
D15
PR7A
2
RDQ10
T
PR7A
2
RDQ10
T
C15
PR4B
2
C (LVDS)*
PR4B
2
C (LVDS)*
C16
PR5B
2
C
PR5B
2
C
GND
GNDIO2
-
GNDIO2
-
D14
PR4A
2
PR4A
2
B16
PR5A
2
F13
PR2B
2
VCCIO
VCCIO2
2
E13
PR2A
2
T (LVDS)*
T
PR5A
2
VREF2_2
C (LVDS)*
PR2B
2
VREF1_2
T (LVDS)*
VCCIO2
2
PR2A
2
T (LVDS)*
T
VREF2_2
C (LVDS)*
VREF1_2
T (LVDS)*
F11
PT28B
1
VREF2_1
C
PT55B
1
VREF2_1
C
E11
PT28A
1
VREF1_1
T
PT55A
1
VREF1_1
T
GND
GNDIO1
-
GNDIO1
-
A15
PT27B
1
C
PT54B
1
C
E12
PT26B
1
C
PT53B
1
C
B15
PT27A
1
T
PT54A
1
T
VCCIO
VCCIO1
1
VCCIO1
1
D12
PT26A
1
T
PT53A
1
T
B14
PT25B
1
C
PT52B
1
C
C14
PT24B
1
C
PT51B
1
C
A14
PT25A
1
T
PT52A
1
T
D13
PT24A
1
T
PT51A
1
T
C
PT50B
1
C
GNDIO1
-
C13
PT23B
1
GND
GNDIO1
-
A13
PT22B
1
C
PT49B
1
C
B13
PT23A
1
T
PT50A
1
T
VCCIO
VCCIO1
1
VCCIO1
1
A12
PT22A
1
T
PT49A
1
T
B11
PT21B
1
C
PT48B
1
C
D11
PT20B
1
C
PT47B
1
C
A11
PT21A
1
T
PT48A
1
T
C11
PT20A
1
T
PT47A
1
T
4-35
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-6E/SE
Ball
Number
Ball/Pad
Function
Bank
-
-
-
Dual Function
LFE2-12E/SE
Differential
-
-
-
D10
PT19B
1
C
T
C10
PT19A
1
GND
GNDIO1
-
B10
PT18B
1
A9
PT17B
1
A10
PT18A
B9
PT17A
VCCIO
VCCIO1
1
A8
PT16B
1
C
D9
PT15B
1
C
B8
PT16A
1
T
C9
PT15A
1
T
GND
GNDIO1
-
B7
PT14B
1
E9
PT13B
1
A7
PT14A
D8
Ball/Pad
Function
Bank
GNDIO1
1
Dual Function
Differential
VCCIO
1
PT37B
1
C
T
PT37A
1
GNDIO1
-
C
PT36B
1
C
C
PT35B
1
C
1
T
PT36A
1
T
1
T
PT35A
1
T
VCCIO1
1
PT34B
1
C
PT33B
1
C
PT34A
1
T
PT33A
1
T
GNDIO1
-
C
PT32B
1
C
C
PT31B
1
C
1
T
PT32A
1
T
PT13A
1
T
PT31A
1
T
VCCIO
VCCIO1
1
VCCIO1
1
A6
PT12B
1
PCLKC1_0
C
PT30B
1
PCLKC1_0
C
B6
PT12A
1
PCLKT1_0
T
PT30A
1
PCLKT1_0
T
E6
XRES
-
XRES
1
PCLKC0_0
C
F8
PT10B
0
GND
GNDIO0
-
PCLKC0_0
E8
PT10A
0
A5
PT9B
0
A3
PT8B
0
C
A4
PT9A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
B3
PT8A
0
T
PT26A
0
T
PCLKT0_0
C
PT28B
0
GNDIO0
-
T
PT28A
0
C
PT27B
0
C
PT26B
0
C
PT27A
0
T
PCLKT0_0
T
A2
PT7B
0
C
PT25B
0
C
C7
PT6B
0
C
PT24B
0
C
B2
PT7A
0
T
PT25A
0
T
D7
PT6A
0
T
PT24A
0
T
D6
PT5B
0
C
PT23B
0
C
GND
GNDIO0
-
GNDIO0
-
F7
PT4B
0
C
PT22B
0
C
C6
PT5A
0
T
PT23A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
F6
PT4A
0
T
PT22A
0
T
C4
PT3B
0
C
PT21B
0
C
B4
PT3A
0
T
PT21A
0
T
-
-
-
GNDIO0
0
-
-
-
VCCIO
0
4-36
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-6E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
D5
PT2B
0
VREF2_0
E5
PT2A
0
VREF1_0
G7
VCC
G9
H7
LFE2-12E/SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
C
PT2B
0
VREF2_0
C
T
PT2A
0
VREF1_0
T
-
VCC
-
VCC
-
VCC
-
VCC
-
VCC
-
J10
VCC
-
VCC
-
K10
VCC
-
VCC
-
K8
VCC
-
VCC
-
G8
VCCAUX
-
VCCAUX
-
H10
VCCAUX
-
VCCAUX
-
J7
VCCAUX
-
VCCAUX
-
K9
VCCAUX
-
VCCAUX
-
C5
VCCIO0
0
VCCIO0
0
E7
VCCIO0
0
VCCIO0
0
C12
VCCIO1
1
VCCIO1
1
E10
VCCIO1
1
VCCIO1
1
E14
VCCIO2
2
VCCIO2
2
G12
VCCIO2
2
VCCIO2
2
K12
VCCIO3
3
VCCIO3
3
M14
VCCIO3
3
VCCIO3
3
M10
VCCIO4
4
VCCIO4
4
P12
VCCIO4
4
VCCIO4
4
M7
VCCIO5
5
VCCIO5
5
P5
VCCIO5
5
VCCIO5
5
K5
VCCIO6
6
VCCIO6
6
M3
VCCIO6
6
VCCIO6
6
E3
VCCIO7
7
VCCIO7
7
G5
VCCIO7
7
VCCIO7
7
T15
VCCIO8
8
VCCIO8
8
A1
GND
-
GND
-
A16
GND
-
GND
-
B12
GND
-
GND
-
B5
GND
-
GND
-
C8
GND
-
GND
-
E15
GND
-
GND
-
E2
GND
-
GND
-
H14
GND
-
GND
-
H8
GND
-
GND
-
H9
GND
-
GND
-
J3
GND
-
GND
-
J8
GND
-
GND
-
J9
GND
-
GND
-
M15
GND
-
GND
-
M2
GND
-
GND
-
P9
GND
-
GND
-
4-37
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-6E/SE and LFE2-12E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-6E/SE
Ball
Number
Ball/Pad
Function
Bank
R12
GND
R5
T1
T16
LFE2-12E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
GND
-
GND
-
Dual Function
Differential
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-38
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
Dual Function
C3
C3
PL2A
7
VREF2_7
T (LVDS)*
C2
C2
PL2B
7
VREF1_7
C (LVDS)*
VCCIO
VCCIO
VCCIO7
7
-
GND
GNDIO7
7
D3
D3
PL7A
7
LDQ8
T
D4
D4
PL6A
7
LDQ8
T (LVDS)*
LDQ8
C
Differential
D2
D2
PL7B
7
GND
GND
GNDIO7
-
E4
E4
PL6B
7
LDQ8
C (LVDS)*
B1
B1
PL13A
7
LDQ16
T
C1
C1
PL13B
7
LDQ16
C
F5
F5
PL15A
7
LDQ16
T
VCCIO
VCC
VCCIO
7
F4
F4
PL14A
7
LDQ16
T (LVDS)*
G6
G6
PL15B
7
LDQ16
C
G4
G4
PL14B
7
LDQ16
C (LVDS)*
LDQS16
T (LVDS)*
D1
D1
PL16A
7
GND
GND
GNDIO7
-
E1
E1
PL16B
7
LDQ16
C (LVDS)*
F3
F3
PL17A
7
LDQ16
T
LDQ16
C
G3
G3
PL17B
7
VCCIO
VCCIO
VCCIO7
7
F2
F2
PL18A
7
LDQ16
T (LVDS)*
F1
F1
PL18B
7
LDQ16
C (LVDS)*
GND
GND
GNDIO7
-
G2
G2
PL19A
7
PCLKT7_0/LDQ16
T
G1
G1
PL19B
7
PCLKC7_0/LDQ16
C
H6
H6
PL21A
6
PCLKT6_0/LDQ25
T (LVDS)*
VCCIO
VCCIO
VCCIO6
6
H5
H5
PL21B
6
PCLKC6_0/LDQ25
C (LVDS)*
VREF2_6/LDQ25
T
H4
H4
PL22A
6
GND
GND
GNDIO6
-
H3
H3
PL22B
6
VREF1_6/LDQ25
C
H2
H2
PL27A
6
LLM0_GDLLT_IN_A**/LDQ25
T (LVDS)*
LLM0_GDLLC_IN_A**/LDQ25
C (LVDS)*
H1
H1
PL27B
6
G10
G10
VCC
-
J4
J4
PL28A
6
LLM0_GDLLT_FB_A/LDQ25
T
J5
J5
PL28B
6
LLM0_GDLLC_FB_A/LDQ25
C
LLM0_GPLLT_IN_A**/LDQ34
T (LVDS)*
J6
J6
LLM0_PLLCAP
6
K4
K4
PL30A
6
GND
GND
GNDIO6
-
4-39
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
J1
J1
PL31A
6
LLM0_GPLLT_FB_A/LDQ34
T
LLM0_GPLLC_IN_A**/LDQ34
C (LVDS)*
LLM0_GPLLC_FB_A/LDQ34
C
K3
K3
PL30B
6
VCCIO
VCCIO
VCCIO6
6
J2
J2
PL31B
6
GND
GND
GNDIO6
-
L2
L2
PL38A
6
LDQ42
T (LVDS)*
K2
K2
PL39A
6
LDQ42
T
L3
L3
PL38B
6
LDQ42
C (LVDS)*
K1
K1
PL39B
6
LDQ42
C
VCCIO
VCCIO
VCCIO6
6
L4
L4
PL40A
6
LDQ42
T (LVDS)*
L1
L1
PL41A
6
LDQ42
T
L5
L5
PL40B
6
LDQ42
C (LVDS)*
LDQ42
C
M1
M1
PL41B
6
GND
GND
GNDIO6
-
N1
N1
PL43A
6
LDQ42
T
N2
N2
PL42A
6
LDQS42
T (LVDS)*
LDQ42
C
P1
P1
PL43B
6
VCCIO
VCCIO
VCCIO6
6
P2
P2
PL42B
6
LDQ42
C (LVDS)*
R1
R1
PL44A
6
LDQ42
T (LVDS)*
GND
GND
GNDIO6
-
R2
R2
PL44B
6
LDQ42
C (LVDS)*
VREF2_5/BDQ6
T
N4
N4
TDI
-
M4
M4
TCK
-
P3
P3
TDO
-
N3
N3
TMS
-
K7
K7
VCCJ
-
M5
M5
PB2A
5
K6
K6
PB3A
5
BDQ6
M6
M6
PB2B
5
VREF1_5/BDQ6
R3
R3
PB5A
5
BDQ6
T
P4
P4
PB5B
5
BDQ6
C
C
-
VCC
VCCIO
5
-
GND
GNDIO5
5
N5
N5
PB30A
5
BDQ33
T
N6
N6
PB30B
5
BDQ33
C
T2
T2
PB31A
5
BDQ33
T
P6
P6
PB32A
5
BDQ33
T
VCCIO
VCCIO
VCCIO5
5
T3
T3
PB31B
5
BDQ33
C
R6
R6
PB32B
5
BDQ33
C
4-40
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
GND
GND
GNDIO5
-
R4
R4
PB33A
L6
L6
PB34A
T4
T4
L7
L7
Dual Function
Differential
5
BDQS33
T
5
BDQ33
T
PB33B
5
BDQ33
C
PB34B
5
BDQ33
C
PCLKT5_0/BDQ33
T
PCLKC5_0/BDQ33
C
N7
N7
PB35A
5
VCCIO
VCCIO
VCCIO5
5
M8
M8
PB35B
5
GND
GND
GNDIO5
-
P7
P7
PB40A
4
PCLKT4_0/BDQ42
T
R8
R8
PB40B
4
PCLKC4_0/BDQ42
C
VCCIO
VCCIO
VCCIO4
4
T5
T5
PB41A
4
BDQ42
T
T6
T6
PB41B
4
BDQ42
C
T8
T8
PB42A
4
BDQS42
T
GND
GND
GNDIO4
-
R7
R7
PB43A
4
BDQ42
T
T9
T9
PB42B
4
BDQ42
C
T7
T7
PB43B
4
BDQ42
C
BDQ42
T
L8
L8
PB44A
4
VCCIO
VCCIO
VCCIO4
4
P8
P8
PB45A
4
BDQ42
T
L9
L9
PB44B
4
BDQ42
C
N8
N8
PB45B
4
BDQ42
C
R9
R9
PB46A
4
BDQ42
T
GND
GND
GNDIO4
-
R10
R10
PB46B
4
BDQ42
C
-
VCC
VCCIO
4
-
GND
GNDIO4
4
N9
N9
PB56A
4
BDQ60
T
T10
T10
PB57A
4
BDQ60
T
M9
M9
PB56B
4
BDQ60
C
R11
R11
PB57B
4
BDQ60
C
P10
P10
PB58A
4
BDQ60
T
N11
N11
PB59A
4
BDQ60
T
VCCIO
VCCIO
VCCIO4
4
N10
N10
PB58B
4
BDQ60
C
P11
P11
PB59B
4
BDQ60
C
T11
T11
PB60A
4
BDQS60
T
GND
GND
GNDIO4
-
M11
M11
PB61A
4
BDQ60
T
T12
T12
PB60B
4
BDQ60
C
4-41
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
L11
L11
PB61B
4
BDQ60
C
T13
T13
PB62A
4
BDQ60
T
R13
R13
PB63A
4
BDQ60
T
VCCIO
VCCIO
VCCIO4
4
T14
T14
PB62B
4
BDQ60
C
BDQ60
C
P13
P13
PB63B
4
GND
GND
GNDIO4
-
N12
N12
PB64A
4
VREF2_4/BDQ60
T
M12
M12
PB64B
4
VREF1_4/BDQ60
C
R15
R15
CFG2
8
N14
N14
CFG1
8
N13
N13
PROGRAMN
8
N15
N15
CFG0
8
P15
P15
PR44B
8
WRITEN
C
L12
L12
INITN
8
CSN
C
CS1N
T
D1
C
T
N16
N16
PR43B
8
GND
GND
GNDIO8
-
R14
R14
CCLK
8
P14
P14
PR44A
8
M13
M13
DONE
8
R16
R16
PR42B
8
VCCIO
VCCIO
VCCIO8
8
M16
M16
PR43A
8
D0/SPIFASTN
P16
P16
PR42A
8
D2
T
L15
L15
PR41B
8
D3
C
GND
GND
GNDIO8
-
L14
L14
PR40A
8
D6
T
L16
L16
PR41A
8
D4
T
L10
L10
PR39B
8
D7
C
D5
C
L13
L13
PR40B
8
VCCIO
VCCIO
VCCIO8
8
K11
K11
PR39A
8
DI/CSSPI0N
T
K14
K14
PR38B
8
DOUT/CSON
C
BUSY/SISPI
T
RLM0_GPLLC_FB_A/RDQ34
C
RLM0_GPLLT_FB_A/RDQ34
T
K13
K13
PR38A
8
GND
GND
GNDIO8
-
K15
K15
PR31B
3
VCCIO
VCCIO
VCCIO3
3
K16
K16
PR31A
3
GND
GND
GNDIO3
-
J16
J16
PR30B
3
RLM0_GPLLC_IN_A**/RDQ34
C (LVDS)*
J15
J15
PR30A
3
RLM0_GPLLT_IN_A**/RDQ34
T (LVDS)*
J14
J14
RLM0_PLLCAP
3
4-42
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
J13
J13
PR28B
3
RLM0_GDLLC_FB_A/RDQ25
C
J12
J12
PR28A
3
RLM0_GDLLT_FB_A/RDQ25
T
H12
H12
PR27B
3
RLM0_GDLLC_IN_A**/RDQ25
C (LVDS)*
GND
GND
GNDIO3
-
H13
H13
PR27A
3
RLM0_GDLLT_IN_A**/RDQ25
T (LVDS)*
VREF2_3/RDQ25
C
H15
H15
PR22B
3
VCCIO
VCCIO
VCCIO3
3
H16
H16
PR22A
3
VREF1_3/RDQ25
T
H11
H11
PR21B
3
PCLKC3_0/RDQ25
C (LVDS)*
J11
J11
PR21A
3
PCLKT3_0/RDQ25
T (LVDS)*
G16
G16
PR19B
2
PCLKC2_0/RDQ16
C
GND
GND
GNDIO2
-
G15
G15
PR19A
2
PCLKT2_0/RDQ16
T
F15
F15
PR17B
2
RDQ16
C
G11
G11
PR18B
2
RDQ16
C (LVDS)*
RDQ16
T
F14
F14
PR17A
2
VCCIO
VCCIO
VCCIO2
2
F12
F12
PR18A
2
RDQ16
T (LVDS)*
G14
G14
PR16B
2
RDQ16
C (LVDS)*
RDQS16
T (LVDS)*
G13
G13
PR16A
2
GND
GND
GNDIO2
-
F16
F16
PR14B
2
RDQ16
C (LVDS)*
F9
F9
PR15B
2
RDQ16
C
E16
E16
PR14A
2
RDQ16
T (LVDS)*
F10
F10
PR15A
2
RDQ16
T
VCCIO
VCCIO
VCCIO2
2
D16
D16
PR13B
2
RDQ16
C
D15
D15
PR13A
2
RDQ16
T
C15
C15
PR6B
2
RDQ8
C (LVDS)*
RDQ8
C
C16
C16
PR7B
2
GND
GND
GNDIO2
-
D14
D14
PR6A
2
RDQ8
T (LVDS)*
B16
B16
PR7A
2
RDQ8
T
VREF2_2
C (LVDS)*
F13
F13
PR2B
2
VCCIO
VCCIO
VCCIO2
2
E13
E13
PR2A
2
VREF1_2
T (LVDS)*
F11
F11
PT64B
1
VREF2_1
C
VREF1_1
T
E11
E11
PT64A
1
GND
GND
GNDIO1
-
A15
A15
PT63B
1
C
E12
E12
PT62B
1
C
B15
B15
PT63A
1
T
4-43
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
VCCIO
VCCIO
VCCIO1
1
D12
D12
PT62A
1
T
B14
B14
PT61B
1
C
C14
C14
PT60B
1
C
A14
A14
PT61A
1
T
D13
D13
PT60A
1
T
C13
C13
PT59B
1
C
GND
GND
GNDIO1
-
A13
A13
PT58B
1
C
T
Dual Function
Differential
B13
B13
PT59A
1
VCCIO
VCCIO
VCCIO1
1
A12
A12
PT58A
1
T
B11
B11
PT57B
1
C
D11
D11
PT56B
1
C
A11
A11
PT57A
1
T
T
C11
C11
PT56A
1
-
GND
GNDIO1
1
-
VCC
VCCIO
1
D10
D10
PT46B
1
C
T
C10
C10
PT46A
1
GND
GND
GNDIO1
-
B10
B10
PT45B
1
C
A9
A9
PT44B
1
C
A10
A10
PT45A
1
T
B9
B9
PT44A
1
T
VCCIO
VCCIO
VCCIO1
1
A8
A8
PT43B
1
C
D9
D9
PT42B
1
C
B8
B8
PT43A
1
T
T
C9
C9
PT42A
1
GND
GND
GNDIO1
-
B7
B7
PT41B
1
C
E9
E9
PT40B
1
C
A7
A7
PT41A
1
T
D8
D8
PT40A
1
T
VCCIO
VCCIO
VCCIO1
1
A6
A6
PT39B
1
PCLKC1_0
C
B6
B6
PT39A
1
PCLKT1_0
T
E6
E6
XRES
1
PCLKC0_0
C
PCLKT0_0
T
F8
F8
PT37B
0
GND
GND
GNDIO0
-
E8
E8
PT37A
0
4-44
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
A5
A5
PT36B
0
C
A3
A3
PT35B
0
C
A4
A4
PT36A
0
T
VCCIO
VCCIO
VCCIO0
0
B3
B3
PT35A
0
T
A2
A2
PT34B
0
C
C7
C7
PT33B
0
C
B2
B2
PT34A
0
T
D7
D7
PT33A
0
T
C
D6
D6
PT32B
0
GND
GND
GNDIO0
-
Dual Function
Differential
F7
F7
PT31B
0
C
C6
C6
PT32A
0
T
VCCIO
VCCIO
VCCIO0
0
F6
F6
PT31A
0
T
C4
C4
PT30B
0
C
B4
B4
PT30A
0
T
-
GND
GNDIO0
0
-
VCC
VCCIO
0
D5
D5
PT2B
0
VREF2_0
C
E5
E5
PT2A
0
VREF1_0
T
G7
G7
VCC
-
G9
G9
VCC
-
H7
H7
VCC
-
J10
J10
VCC
-
K10
K10
VCC
-
K8
K8
VCC
-
G8
G8
VCCAUX
-
H10
H10
VCCAUX
-
J7
J7
VCCAUX
-
K9
K9
VCCAUX
-
C5
C5
VCCIO0
0
E7
E7
VCCIO0
0
C12
C12
VCCIO1
1
E10
E10
VCCIO1
1
E14
E14
VCCIO2
2
G12
G12
VCCIO2
2
K12
K12
VCCIO3
3
M14
M14
VCCIO3
3
M10
M10
VCCIO4
4
P12
P12
VCCIO4
4
M7
M7
VCCIO5
5
4-45
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE Logic Signal Connections: 256 fpBGA (Cont.)
LFE2-20E/SE
Ball
Number
Ball Number
Ball/Pad Function
Bank
P5
P5
VCCIO5
5
K5
K5
VCCIO6
6
M3
M3
VCCIO6
6
E3
E3
VCCIO7
7
G5
G5
VCCIO7
7
T15
T15
VCCIO8
8
A1
A1
GND
-
A16
A16
GND
-
B12
B12
GND
-
B5
B5
GND
-
C8
C8
GND
-
E15
E15
GND
-
E2
E2
GND
-
H14
H14
GND
-
H8
H8
GND
-
H9
H9
GND
-
J3
J3
GND
-
J8
J8
GND
-
J9
J9
GND
-
M15
M15
GND
-
M2
M2
GND
-
P9
P9
GND
-
R12
R12
GND
-
R5
R5
GND
-
T1
T1
GND
-
T16
T16
GND
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-46
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
E4
PL2A
7
VREF2_7
T (LVDS)*
PL2A
7
VREF2_7
T (LVDS)*
E5
PL2B
7
VREF1_7
C (LVDS)*
PL2B
7
VREF1_7
C (LVDS)*
T (LVDS)*
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
-
-
-
GNDIO7
-
E3
NC
-
PL4A
7
LDQ8
F4
PL3A
7
PL5A
7
LDQ8
T
F3
NC
-
PL4B
7
LDQ8
C (LVDS)*
LDQ8
C
T (LVDS)*
F5
PL3B
7
VCCIO
VCCIO7
7
T
C
PL5B
7
VCCIO7
7
E2
PL4A
7
T (LVDS)*
PL6A
7
LDQ8
G6
PL5A
7
T
PL7A
7
LDQ8
T
E1
PL4B
7
C (LVDS)*
PL6B
7
LDQ8
C (LVDS)*
G7
PL5B
7
C
PL7B
7
LDQ8
C
GNDIO
GNDIO7
-
GNDIO7
-
F1
NC
-
PL9A
7
LDQ8
T
H4
NC
-
PL8A
7
LDQS8
T (LVDS)*
F2
NC
-
PL9B
7
LDQ8
C
C (LVDS)*
-
-
-
VCCIO7
7
H5
NC
-
PL8B
7
LDQ8
G1
NC
-
PL11A
7
LDQ8
T
G3
NC
-
PL10A
7
LDQ8
T (LVDS)*
G2
NC
-
PL11B
7
LDQ8
C
-
-
-
GNDIO
-
G4
NC
-
J4
PL7A
7
LDQ10
PL10B
7
LDQ8
C (LVDS)*
T
PL13A
7
LDQ16
T
H1
PL6A
7
LDQ10
J5
PL7B
7
PL12A
7
LDQ16
T (LVDS)*
LDQ10
C
PL13B
7
LDQ16
L6
PL9A
7
C
LDQ10
T
PL15A
7
LDQ16
VCCIO
VCCIO7
7
T
VCCIO7
7
T (LVDS)*
J2
PL8A
7
LDQ10
T (LVDS)*
PL14A
7
LDQ16
L5
PL9B
7
LDQ10
C
PL15B
7
LDQ16
C
J1
PL8B
7
LDQ10
C (LVDS)*
PL14B
7
LDQ16
C (LVDS)*
K3
PL10A
7
LDQS10
T (LVDS)*
PL16A
7
LDQS16
T (LVDS)*
GNDIO
GNDIO7
-
GNDIO
-
K4
PL10B
7
LDQ10
C (LVDS)*
PL16B
7
LDQ16
C (LVDS)*
K2
PL11A
7
LDQ10
T
PL17A
7
LDQ16
T
VCCIO
VCCIO7
7
VCCIO7
7
K1
PL11B
7
LDQ10
C
PL17B
7
LDQ16
C
L4
PL12A
7
LDQ10
T (LVDS)*
PL18A
7
LDQ16
T (LVDS)*
GNDIO
GNDIO7
-
L3
PL12B
7
LDQ10
C (LVDS)*
LDQ16
C (LVDS)*
L2
PL13A
7
PCLKT7_0/LDQ10
T
PL19A
7
PCLKT7_0/LDQ16
T
L1
PL13B
7
PCLKC7_0/LDQ10
C
PL19B
7
PCLKC7_0/LDQ16
C
PCLKT6_0
T (LVDS)*
PL21A
6
PCLKT6_0/LDQ25
T (LVDS)*
-
-
PL21B
6
PCLKC6_0/LDQ25
C (LVDS)*
M5
PL15A
6
VCCIO
VCCIO6
6
M6
PL15B
6
PCLKC6_0
C (LVDS)*
4-47
GNDIO
-
PL18B
7
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
M3
PL16A
6
VREF2_6
T
PL22A
6
VREF2_6/LDQ25
T
GNDIO
GNDIO6
-
-
-
M4
PL16B
6
PL22B
6
VREF1_6/LDQ25
C
VREF1_6
C
-
-
-
VCCIO6
6
N1
NC
-
PL24A
6
LDQ25
T
M2
NC
-
PL23A
6
LDQ25
T (LVDS)*
N2
NC
-
PL24B
6
LDQ25
C
M1
NC
-
PL23B
6
LDQ25
C (LVDS)*
-
-
-
GNDIO
-
N3
NC
-
PL25A
6
LDQS25
T (LVDS)*
N5
NC
-
PL26A
6
LDQ25
T
N4
NC
-
PL25B
6
LDQ25
C (LVDS)*
-
-
-
VCCIO6
6
P5
NC
-
PL26B
6
LDQ25
C
P1
PL17A
6
LLM0_GDLLT_IN_A**
T (LVDS)*
PL27A
6
LLM0_GDLLT_IN_A**/LDQ25
T (LVDS)*
P2
PL17B
6
LLM0_GDLLC_IN_A**
C (LVDS)*
PL27B
6
LLM0_GDLLC_IN_A**/LDQ25
C (LVDS)*
P4
PL18A
6
LLM0_GDLLT_FB_A
T
PL28A
6
LLM0_GDLLT_FB_A/LDQ25
T
-
-
-
GNDIO
-
R4
PL18B
6
PL28B
6
LLM0_GDLLC_FB_A/LDQ25
C
LLM0_GPLLT_IN_A**/LDQ34
T (LVDS)*
LLM0_GPLLT_FB_A/LDQ34
T
LLM0_GDLLC_FB_A
C
LLM0_GPLLT_IN_A**
T (LVDS)*
P6
LLM0_PLLCAP
6
R1
PL20A
6
LLM0_PLLCAP
6
PL30A
6
GNDIO
GNDIO6
-
-
-
R3
PL21A
6
LLM0_GPLLT_FB_A
T
PL31A
6
R2
PL20B
6
T4
PL21B
6
LLM0_GPLLC_IN_A**
C (LVDS)*
PL30B
6
LLM0_GPLLC_IN_A/LDQ34
C (LVDS)*
LLM0_GPLLC_FB_A
C
PL31B
6
LLM0_GPLLC_FB_A/LDQ34
T5
PL23A
6
C
T
PL33A
6
LDQ34
VCCIO
VCCIO6
6
T
VCCIO6
6
T1
PL22A
6
T3
PL23B
6
T (LVDS)*
PL32A
6
LDQ34
T (LVDS)*
C
PL33B
6
LDQ34
T2
PL22B
6
C
C (LVDS)*
PL32B
6
LDQ34
C (LVDS)*
GNDIO
GNDIO6
-
GNDIO6
LDQ42
T
-
-
-
V1
PL25A
6
VCCIO6
6
PL39A
6
-
-
-
GNDIO
-
V2
PL25B
6
LDQ28
C
PL39B
6
LDQ42
C
U1
PL24A
6
U3
PL27A
6
LDQ28
T (LVDS)*
PL38A
6
LDQ42
T (LVDS)*
LDQ28
T
PL41A
6
LDQ42
VCCIO
VCCIO6
6
T
VCCIO6
6
U2
PL24B
6
LDQ28
PL38B
6
LDQ42
C (LVDS)*
U4
PL27B
6
LDQ28
C
PL41B
6
LDQ42
C
R6
PL26A
6
LDQ28
T (LVDS)*
PL40A
6
LDQ42
T (LVDS)*
LDQ28
T
PL43A
6
LDQ42
T
GNDIO
-
LDQ28
T
C (LVDS)*
R7
PL29A
6
GNDIO
GNDIO6
-
T7
PL29B
6
LDQ28
C
PL43B
6
LDQ42
C
T6
PL26B
6
LDQ28
C (LVDS)*
PL40B
6
LDQ42
C (LVDS)*
4-48
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
AA2
PL31A
6
LDQ28
T
PL45A
6
LDQ42
T
VCCIO
VCCIO6
6
VCCIO6
6
Y1
PL28A
6
LDQS28
PL42A
6
LDQS42
T (LVDS)*
AA1
PL31B
6
LDQ28
C
PL45B
6
LDQ42
C
W1
PL28B
6
LDQ28
C (LVDS)*
PL42B
6
LDQ42
C (LVDS)*
LDQ28
C (LVDS)*
LDQ42
C (LVDS)*
LDQ42
T (LVDS)*
V3
PL30B
6
GNDIO
GNDIO6
-
V4
PL30A
6
U5
TDI
-
U7
TCK
V6
TDO
T (LVDS)*
PL44B
6
GNDIO
-
PL44A
6
TDI
-
-
TCK
-
-
TDO
-
LDQ28
T (LVDS)*
V5
TMS
-
TMS
-
T8
VCCJ
-
VCCJ
-
W4
PB3A
5
BDQ6
T
PB3A
5
BDQ6
T
Y3
PB2A
5
VREF2_5/BDQ6
T
PB2A
5
VREF2_5/BDQ6
T
W3
PB3B
5
BDQ6
C
PB3B
5
BDQ6
C
Y2
PB2B
5
VREF1_5/BDQ6
C
PB2B
5
VREF1_5/BDQ6
C
BDQ6
T
PB5A
5
BDQ6
T
VCCIO5
5
AB3
PB5A
5
VCCIO
VCCIO5
5
W5
PB4A
5
BDQ6
T
PB4A
5
BDQ6
T
AB2
PB5B
5
BDQ6
C
PB5B
5
BDQ6
C
W6
PB4B
5
BDQ6
C
PB4B
5
BDQ6
C
AB5
PB7A
5
BDQ6
T
PB7A
5
BDQ6
T
GNDIO
GNDIO5
-
GNDIO
-
Y4
PB6A
5
BDQS6
T
PB6A
5
BDQS6
T
AB4
PB7B
5
BDQ6
C
PB7B
5
BDQ6
C
AA3
PB6B
5
BDQ6
C
PB6B
5
BDQ6
C
BDQ6
T
PB9A
5
BDQ6
T
VCCIO5
5
AB6
PB9A
5
VCCIO
VCCIO5
5
AA5
PB8A
5
BDQ6
T
PB8A
5
BDQ6
T
AA6
PB9B
5
BDQ6
C
PB9B
5
BDQ6
C
Y5
PB8B
5
BDQ6
C
PB8B
5
BDQ6
C
GNDIO
GNDIO5
-
GNDIO
BDQ24
T
-
-
-
Y6
PB12A
5
BDQ15
W7
PB11A
5
BDQ15
T
PB20A
5
BDQ24
T
Y7
PB12B
5
BDQ15
C
PB21B
5
BDQ24
C
W8
PB11B
5
BDQ15
C
PB20B
5
BDQ24
C
U8
PB14A
5
BDQ15
T
PB23A
5
BDQ24
T
VCCIO
VCCIO5
5
VCCIO5
5
AA7
PB13A
5
BDQ15
T
PB22A
5
BDQ24
T
U9
PB14B
5
BDQ15
C
PB23B
5
BDQ24
C
AB7
PB13B
5
BDQ15
C
PB22B
5
BDQ24
C
Y8
PB16A
5
BDQ15
T
PB25A
5
BDQ24
T
GNDIO
GNDIO5
-
GNDIO
-
T
4-49
VCCIO5
5
PB21A
5
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
Differential
Ball/Pad
Function
Bank
Dual Function
W9
PB15A
5
BDQS15
T
PB24A
5
BDQS24
T
AA8
PB16B
5
BDQ15
C
PB25B
5
BDQ24
C
V9
PB15B
5
BDQ15
C
PB24B
5
BDQ24
C
BDQ15
T
PB27A
5
BDQ24
T
VCCIO5
5
AB8
PB18A
5
VCCIO
VCCIO5
5
Differential
W10
PB17A
5
BDQ15
T
PB26A
5
BDQ24
T
AA9
PB18B
5
BDQ15
C
PB27B
5
BDQ24
C
V10
PB17B
5
BDQ15
C
PB26B
5
BDQ24
C
GNDIO
GNDIO5
-
GNDIO
-
Y10
PB21A
5
BDQ24
T
PB30A
5
BDQ33
T
AB9
PB20A
5
BDQ24
T
PB29A
5
BDQ33
T
AA10
PB21B
5
BDQ24
C
PB30B
5
BDQ33
C
AB10
PB20B
5
BDQ24
C
PB29B
5
BDQ33
C
AB11
PB23A
5
BDQ24
T
PB32A
5
BDQ33
T
U10
PB22A
5
BDQ24
T
PB31A
5
BDQ33
T
VCCIO
VCCIO5
5
VCCIO5
5
AA11
PB23B
5
BDQ24
C
PB32B
5
BDQ33
C
U11
PB22B
5
BDQ24
C
PB31B
5
BDQ33
C
GNDIO
GNDIO5
-
GNDIO5
-
AB12
PB25A
5
BDQ24
T
PB34A
5
BDQ33
T
Y11
PB24A
5
BDQS24
T
PB33A
5
BDQS33
T
AA12
PB25B
5
BDQ24
C
PB34B
5
BDQ33
C
W11
PB24B
5
BDQ24
C
PB33B
5
BDQ33
C
PCLKT5_0/BDQ24
T
PCLKT5_0/BDQ33
T
PCLKC5_0/BDQ33
C
AB13
PB26A
5
VCCIO
VCCIO5
5
AB14
PB26B
5
GNDIO
GNDIO5
-
PCLKC5_0/BDQ24
C
PB35A
5
VCCIO5
5
PB35B
5
GNDIO5
-
Y12
PB32A
4
BDQ33
T
PB41A
4
BDQ42
T
W12
PB32B
4
BDQ33
C
PB41B
4
BDQ42
C
VCCIO
VCCIO4
4
VCCIO4
4
U12
PB31A
4
PCLKT4_0/BDQ33
T
PB40A
4
PCLKT4_0/BDQ42
T
V12
PB31B
4
PCLKC4_0/BDQ33
C
PB40B
4
PCLKC4_0/BDQ42
C
U13
PB34A
4
BDQ33
T
PB43A
4
BDQ42
T
GNDIO
GNDIO4
-
GNDIO4
-
AA13
PB33A
4
BDQS33
T
PB42A
4
BDQS42
T
U14
PB34B
4
BDQ33
C
PB43B
4
BDQ42
C
Y13
PB33B
4
BDQ33
C
PB42B
4
BDQ42
C
AB16
PB36A
4
BDQ33
T
PB45A
4
BDQ42
T
VCCIO
VCCIO4
4
VCCIO4
4
AB15
PB35A
4
BDQ33
T
PB44A
4
BDQ42
T
AB17
PB36B
4
BDQ33
C
PB45B
4
BDQ42
C
AA14
PB35B
4
BDQ33
C
PB44B
4
BDQ42
C
W13
PB37A
4
BDQ33
T
PB46A
4
BDQ42
T
GNDIO
GNDIO4
-
W14
PB37B
4
BDQ33
C
BDQ42
C
4-50
GNDIO4
-
PB46B
4
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
Differential
Ball/Pad
Function
Bank
Dual Function
AB18
PB39A
4
BDQ42
T
PB48A
4
BDQ51
T
AB19
PB39B
4
BDQ42
C
PB48B
4
BDQ51
C
Y15
PB41A
4
BDQ42
T
PB50A
4
BDQ51
T
BDQ42
T
BDQ51
T
Differential
V14
PB40A
4
VCCIO
VCCIO4
4
PB49A
4
VCCIO4
4
AA15
PB41B
4
BDQ42
W15
PB40B
4
BDQ42
C
PB50B
4
BDQ51
C
C
PB49B
4
BDQ51
C
GNDIO
GNDIO4
-
GNDIO
-
AB20
PB43A
4
BDQ42
T
PB52A
4
BDQ51
T
AA16
PB42A
4
BDQS42
T
PB51A
4
BDQS51
T
AB21
PB43B
4
BDQ42
C
PB52B
4
BDQ51
C
AA17
PB42B
4
BDQ42
C
PB51B
4
BDQ51
C
Y16
PB45A
4
BDQ42
T
PB54A
4
BDQ51
T
U15
PB44A
4
BDQ42
T
PB53A
4
BDQ51
T
VCCIO
VCCIO4
4
VCCIO4
4
W16
PB45B
4
BDQ42
C
PB54B
4
BDQ51
C
U16
PB44B
4
BDQ42
C
PB53B
4
BDQ51
C
AA18
PB46A
4
BDQ42
T
PB55A
4
BDQ51
T
AA20
PB46B
4
BDQ42
C
PB55B
4
BDQ51
C
GNDIO
GNDIO4
-
GNDIO
-
V16
PB49A
4
BDQ51
T
PB58A
4
BDQ60
T
V17
PB49B
4
BDQ51
C
PB58B
4
BDQ60
C
AA21
PB48A
4
BDQ51
T
PB57A
4
BDQ60
T
VCCIO
VCCIO4
4
VCCIO4
4
Y19
PB51A
4
BDQS51
T
PB60A
4
BDQS60
T
AA22
PB48B
4
BDQ51
C
PB57B
4
BDQ60
C
Y20
PB51B
4
BDQ51
C
PB60B
4
BDQ60
C
BDQ51
T
PB59A
4
BDQ60
T
GNDIO4
-
Y18
PB50A
4
GNDIO
GNDIO4
-
Y21
PB53A
4
BDQ51
T
PB62A
4
BDQ60
T
Y17
PB50B
4
BDQ51
C
PB59B
4
BDQ60
C
Y22
PB53B
4
BDQ51
C
PB62B
4
BDQ60
C
W17
PB52A
4
BDQ51
T
PB61A
4
BDQ60
T
VCCIO
VCCIO4
4
VCCIO4
4
U18
PB54A
4
BDQ51
T
PB63A
4
BDQ60
T
W18
PB52B
4
BDQ51
C
PB61B
4
BDQ60
C
V18
PB54B
4
BDQ51
C
PB63B
4
BDQ60
C
GNDIO
GNDIO4
-
GNDIO4
-
T15
PB55A
4
VREF2_4/BDQ51
T
PB64A
4
VREF2_4/BDQ60
T
T16
PB55B
4
VREF1_4/BDQ51
C
PB64B
4
VREF1_4/BDQ60
C
W19
CFG2
8
CFG2
8
D1/SPID6
C
V19
CFG1
8
CFG1
8
V20
PROGRAMN
8
PROGRAMN
8
W20
CFG0
8
U22
PR28B
8
D1/SPID6
C
4-51
CFG0
8
PR42B
8
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
Ball
Number
Ball/Pad
Function
Bank
V22
INITN
8
R16
PR30B
8
GNDIO
GNDIO8
-
W22
CCLK
8
R17
PR30A
8
V21
DONE
VCCIO
LFE2-20E/20SE
Dual Function
WRITEN
Differential
C
Ball/Pad
Function
Bank
INITN
8
PR44B
8
GNDIO8
-
Dual Function
Differential
WRITEN
C
CS1N
T
CCLK
8
PR44A
8
8
DONE
8
VCCIO8
8
VCCIO8
8
U19
PR29B
8
CSN
C
PR43B
8
CSN
C
T17
PR26B
8
D5
C
PR40B
8
D5
C
U20
PR29A
8
D0/SPIFASTN
T
PR43A
8
D0/SPIFASTN
T
U21
PR28A
8
D2
T
PR42A
8
D2
T
GNDIO
GNDIO8
-
GNDIO8
-
T18
PR26A
8
D6
T
PR40A
8
D6
T
T20
PR27B
8
D3
C
PR41B
8
D3
C
T21
PR25B
8
D7
C
PR39B
8
D7
C
D4
T
PR41A
8
D4
T
VCCIO8
8
T19
PR27A
8
VCCIO
VCCIO8
8
CS1N
T
T22
PR25A
8
DI/CSSPI0N
T
PR39A
8
DI/CSSPI0N
T
R18
PR24B
8
DOUT/CSON
C
PR38B
8
DOUT/CSON
C
R19
PR24A
8
BUSY/SISPI
T
PR38A
8
BUSY/SISPI
T
-
-
-
VCCIO3
3
GNDIO
GNDIO3
-
P18
PR22B
3
RDQ34
C (LVDS)*
R22
PR23B
3
C
PR33B
3
RDQ34
C
P19
PR22A
3
T (LVDS)*
PR32A
3
RDQ34
T (LVDS)*
T
RDQ34
T
C
C (LVDS)*
R21
PR23A
3
VCCIO
VCCIO3
3
R20
PR21B
3
RLM0_GPLLC_FB_A
P22
PR21A
3
RLM0_GPLLT_FB_A
P21
PR20B
3
N21
PR20A
3
N17
RLM0_PLLCAP
3
N22
PR18B
M22
GNDIO3
-
PR32B
3
PR33A
3
VCCIO3
3
C
PR31B
3
RLM0_GPLLC_FB_A/RDQ34
T
PR31A
3
RLM0_GPLLT_FB_A/RDQ34
T
RLM0_GPLLC_IN_A**
C (LVDS)*
PR30B
3
RLM0_GPLLC_IN_A**/RDQ34
C (LVDS)*
RLM0_GPLLT_IN_A**
T (LVDS)*
PR30A
3
RLM0_GPLLT_IN_A**/RDQ34
T (LVDS)*
RLM0_PLLCAP
3
3
RLM0_GDLLC_FB_A
C
PR28B
3
RLM0_GDLLC_FB_A/RDQ25
C
PR17B
3
RLM0_GDLLC_IN_A**
C (LVDS)*
PR27B
3
RLM0_GDLLC_IN_A**/RDQ25 C (LVDS)*
GNDIO
GNDIO3
-
GNDIO3
-
N20
PR18A
3
RLM0_GDLLT_FB_A
T
PR28A
3
RLM0_GDLLT_FB_A/RDQ25
T
M21
PR17A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
PR27A
3
RLM0_GDLLT_IN_A**/RDQ25
T (LVDS)*
N19
NC
-
PR26B
3
RDQ25
C
-
-
-
VCCIO3
3
M19
NC
-
PR26A
3
RDQ25
T
J22
NC
-
PR23B
3
RDQ25
C (LVDS)*
-
-
-
GNDIO
-
L22
NC
-
PR24B
3
RDQ25
C
H22
NC
-
PR23A
3
RDQ25
T (LVDS)*
K22
NC
-
PR24A
3
RDQ25
T
4-52
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
M20
PR16B
3
VREF2_3
C
PR22B
3
VREF2_3/RDQ25
C
VCCIO
VCCIO3
3
VCCIO3
3
L21
PR16A
3
VREF1_3
T
PR22A
3
VREF1_3/RDQ25
T
K21
PR15B
3
PCLKC3_0
C (LVDS)*
PR21B
3
PCLKC3_0/RDQ25
C (LVDS)*
J21
PR15A
3
PCLKT3_0
T (LVDS)*
PR21A
3
PCLKT3_0/RDQ25
T (LVDS)*
M18
PR13B
2
PCLKC2_0/RDQ10
C
PR19B
2
PCLKC2_0/RDQ16
C
GNDIO
GNDIO2
-
GNDIO2
-
L17
PR13A
2
PCLKT2_0/RDQ10
T
PR19A
2
PCLKT2_0/RDQ16
T
L19
PR12B
2
RDQ10
C (LVDS)*
PR18B
2
RDQ16
C (LVDS)*
K18
PR10B
2
RDQ10
C (LVDS)*
PR16B
2
RDQ16
C (LVDS)*
L20
PR12A
2
RDQ10
T (LVDS)*
PR18A
2
RDQ16
T (LVDS)*
VCCIO
VCCIO2
2
VCCIO2
2
K19
PR10A
2
RDQS10
T (LVDS)*
PR16A
2
RDQS16
T (LVDS)*
L18
PR11B
2
RDQ10
C
PR17B
2
RDQ16
C
K17
PR11A
2
RDQ10
T
PR17A
2
RDQ16
T
GNDIO
GNDIO2
-
GNDIO2
-
J17
PR8B
2
RDQ10
C (LVDS)*
PR14B
2
RDQ16
C (LVDS)*
G22
PR9B
2
RDQ10
C
PR15B
2
RDQ16
C
J18
PR8A
2
RDQ10
T (LVDS)*
PR14A
2
RDQ16
T (LVDS)*
RDQ10
T
RDQ16
T
F22
PR9A
2
VCCIO
VCCIO2
2
PR15A
2
VCCIO2
2
H21
PR6B
2
RDQ10
K20
PR7B
2
RDQ10
C (LVDS)*
PR12B
2
RDQ16
C (LVDS)*
C
PR13B
2
RDQ16
C
G21
PR6A
2
J19
PR7A
2
RDQ10
T (LVDS)*
PR12A
2
RDQ16
T (LVDS)*
RDQ10
T
PR13A
2
RDQ16
D22
NC
T
-
PR10B
2
RDQ8
C (LVDS)*
F21
NC
-
PR11B
2
RDQ8
C
T (LVDS)*
-
-
-
GNDIO
-
E21
NC
-
PR10A
2
RDQ8
E22
NC
-
PR11A
2
RDQ8
T
H19
NC
-
PR8B
2
RDQ8
C (LVDS)*
G20
NC
-
PR9B
2
RDQ8
C
-
-
-
VCCIO2
2
G19
NC
-
PR8A
2
RDQS8
T (LVDS)*
F20
NC
-
PR9A
2
RDQ8
T
RDQ8
C
G17
PR5B
2
GNDIO
GNDIO2
-
E20
PR4B
2
F19
PR5A
2
D20
PR4A
F18
PR3B
VCCIO
VCCIO2
C21
C
PR7B
2
GNDIO2
-
C (LVDS)*
PR6B
2
RDQ8
C (LVDS)*
T
PR7A
2
RDQ8
T
2
T (LVDS)*
PR6A
2
RDQ8
T (LVDS)*
2
C
PR5B
2
RDQ8
C
2
VCCIO2
2
NC
-
PR4B
2
RDQ8
C (LVDS)*
F16
PR3A
2
PR5A
2
RDQ8
T
C22
NC
-
PR4A
2
RDQ8
T (LVDS)*
T
4-53
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
Ball
Number
Ball/Pad
Function
Bank
-
-
-
D19
PR2B
2
VREF2_2
E19
PR2A
2
VREF1_2
B21
PT55B
1
B22
PT55A
1
GNDIO
GNDIO1
-
D18
PT53B
1
C20
PT54B
E18
PT53A
C19
LFE2-20E/20SE
Ball/Pad
Function
Bank
GNDIO
-
C (LVDS)*
PR2B
T (LVDS)*
PR2A
VREF2_1
C
VREF1_1
T
Dual Function
Differential
2
VREF2_2
C (LVDS)*
2
VREF1_2
T (LVDS)*
PT64B
1
VREF2_1
C
PT64A
1
VREF1_1
T
GNDIO1
-
C
PT62B
1
C
1
C
PT63B
1
C
1
T
PT62A
1
T
PT54A
1
T
PT63A
1
T
VCCIO
VCCIO1
1
VCCIO1
1
D17
PT51B
1
C
PT60B
1
C
B20
PT52B
1
C
PT61B
1
C
C18
PT51A
1
T
PT60A
1
T
A19
PT52A
1
T
PT61A
1
T
GNDIO
GNDIO1
-
GNDIO1
-
A18
PT49B
1
C
PT58B
1
C
A21
PT50B
1
C
PT59B
1
C
B18
PT49A
1
T
PT58A
1
T
T
T
A20
PT50A
1
VCCIO
VCCIO1
1
Dual Function
Differential
PT59A
1
VCCIO1
1
D16
PT47B
1
C
PT56B
1
C
G16
PT48B
1
C
PT57B
1
C
T
E16
PT47A
1
T
PT56A
1
G15
PT48A
1
T
PT57A
1
T
C17
PT46B
1
C
PT55B
1
C
GNDIO
GNDIO1
-
GNDIO1
-
C16
PT46A
1
T
PT55A
1
T
A17
PT44B
1
C
PT53B
1
C
B17
PT45B
1
C
PT54B
1
C
A16
PT44A
1
T
PT53A
1
T
VCCIO
VCCIO1
1
VCCIO1
1
B16
PT45A
1
T
PT54A
1
T
E15
PT42B
1
C
PT51B
1
C
C15
PT43B
1
C
PT52B
1
C
F15
PT42A
1
T
PT51A
1
T
D15
PT43A
1
T
PT52A
1
T
B15
PT40B
1
C
PT49B
1
C
GNDIO
GNDIO1
-
GNDIO1
-
A15
PT40A
1
VCCIO
VCCIO1
1
T
A14
PT39A
1
T
PT48A
1
T
B14
PT39B
1
C
PT48B
1
C
D14
PT37B
1
C
PT46B
1
C
E14
PT36B
1
C
PT45B
1
C
4-54
PT49A
1
VCCIO1
1
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Ball/Pad
Function
GNDIO
GNDIO1
-
Bank
GNDIO1
-
C13
PT37A
1
F14
PT36A
1
T
PT46A
1
T
T
PT45A
1
T
A13
PT35B
E13
PT34B
1
C
PT44B
1
C
1
C
PT43B
1
VCCIO
VCCIO1
1
C
VCCIO1
1
B13
PT35A
1
PT44A
1
D13
PT34A
1
T
PT43A
1
T
E12
PT33B
1
C
PT42B
1
C
GNDIO
GNDIO1
-
D12
PT33A
1
A12
PT31B
1
B12
PT30B
1
VCCIO
VCCIO1
1
A11
PT31A
1
C12
PT30A
1
F12
XRES
1
B10
PT28B
0
GNDIO
GNDIO0
-
Dual Function
Differential
T
T
PCLKC1_0
PCLKT1_0
PCLKC0_0
PCLKT0_0
GNDIO1
-
PT42A
1
C
PT40B
1
C
PT39B
1
VCCIO1
1
T
PT40A
1
T
PT39A
1
XRES
1
C
PT37B
0
GNDIO0
-
Dual Function
Differential
T
T
C
PCLKC1_0
C
T
PCLKT1_0
T
PCLKC0_0
C
B11
PT28A
0
T
PT37A
0
C11
PT26B
0
C
PT35B
0
PCLKT0_0
C
T
A10
PT27B
0
C
PT36B
0
C
C10
PT26A
0
T
PT35A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
A9
PT27A
0
T
PT36A
0
T
A8
PT24B
0
C
PT33B
0
C
E11
PT25B
0
C
PT34B
0
C
A7
PT24A
0
T
PT33A
0
T
F11
PT25A
0
T
PT34A
0
T
GNDIO
GNDIO0
-
B8
PT23B
0
VCCIO
VCCIO0
0
B9
PT23A
0
T
PT32A
0
T
C8
PT20B
0
C
PT29B
0
C
B7
PT21B
0
C
PT30B
0
C
D8
PT20A
0
T
PT29A
0
T
A6
PT21A
0
T
PT30A
0
T
GNDIO
GNDIO0
-
GNDIO0
-
C7
PT17B
0
C
PT26B
0
C
D10
PT18B
0
C
PT27B
0
C
C6
PT17A
0
T
PT26A
0
T
E10
PT18A
0
T
PT27A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
F10
PT15B
0
C
PT24B
0
C
B6
PT16B
0
C
PT25B
0
C
C
4-55
GNDIO0
-
PT32B
0
VCCIO0
0
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
Ball
Number
Ball/Pad
Function
Bank
D9
PT15A
B5
LFE2-20E/20SE
Differential
Ball/Pad
Function
Bank
0
T
PT24A
0
T
PT16A
0
T
PT25A
0
T
GNDIO
GNDIO0
-
GNDIO0
-
A5
PT13B
0
C
PT22B
0
C
F9
PT14B
0
C
PT23B
0
C
A4
PT13A
0
T
PT22A
0
T
E9
PT14A
0
T
PT23A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
G8
PT11B
0
C
PT20B
0
C
A3
PT12B
0
C
PT21B
0
C
E8
PT11A
0
T
PT20A
0
T
A2
PT12A
0
T
PT21A
0
T
GNDIO
GNDIO0
-
GNDIO0
-
Dual Function
-
-
-
C3
PT10B
0
C
B3
PT10A
0
T
-
-
-
E7
PT8B
0
F8
PT9B
0
Dual Function
Differential
VCCIO0
0
PT10B
0
C
T
PT10A
0
GNDIO0
-
C
PT8B
0
C
C
PT9B
0
C
F7
PT8A
0
T
PT8A
0
T
D7
PT9A
0
T
PT9A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
D4
PT6B
0
C
PT6B
0
C
D5
PT7B
0
C
PT7B
0
C
C4
PT6A
0
T
PT6A
0
T
D6
PT7A
0
T
PT7A
0
T
GNDIO
GNDIO0
-
GNDIO
-
J7
PT4B
0
C
PT4B
0
C
B2
PT5B
0
C
PT5B
0
C
H7
PT4A
0
T
PT4A
0
T
B1
PT5A
0
T
PT5A
0
T
VCCIO
VCCIO0
0
D1
PT2B
0
D3
PT3B
0
C1
PT2A
0
VREF2_0
VREF1_0
VCCIO0
0
C
PT2B
0
C
PT3B
0
T
PT2A
0
T
C2
PT3A
0
PT3A
0
J10
VCC
-
VCC
-
J11
VCC
-
VCC
-
J12
VCC
-
VCC
-
J13
VCC
-
VCC
-
K14
VCC
-
VCC
-
K9
VCC
-
VCC
-
L14
VCC
-
VCC
-
L9
VCC
-
VCC
-
M14
VCC
-
VCC
-
4-56
VREF2_0
C
C
VREF1_0
T
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
Ball
Number
Ball/Pad
Function
Bank
M9
VCC
N14
N9
LFE2-20E/20SE
Ball/Pad
Function
Bank
-
VCC
-
VCC
-
VCC
-
VCC
-
VCC
-
P10
VCC
-
VCC
-
P11
VCC
-
VCC
-
P12
VCC
-
VCC
-
P13
VCC
-
VCC
-
G10
VCCIO0
0
VCCIO0
0
G9
VCCIO0
0
VCCIO0
0
H9
VCCIO0
0
VCCIO0
0
H8
VCCIO0
0
VCCIO0
0
G11
VCCIO1
1
VCCIO1
1
G12
VCCIO1
1
VCCIO1
1
G13
VCCIO1
1
VCCIO1
1
G14
VCCIO1
1
VCCIO1
1
H14
VCCIO2
2
VCCIO2
2
H15
VCCIO2
2
VCCIO2
2
J15
VCCIO2
2
VCCIO2
2
K16
VCCIO2
2
VCCIO2
2
Dual Function
Differential
L16
VCCIO3
3
VCCIO3
3
M16
VCCIO3
3
VCCIO3
3
N16
VCCIO3
3
VCCIO3
3
P16
VCCIO3
3
VCCIO3
3
R14
VCCIO4
4
VCCIO4
4
T12
VCCIO4
4
VCCIO4
4
T13
VCCIO4
4
VCCIO4
4
T14
VCCIO4
4
VCCIO4
4
R9
VCCIO5
5
VCCIO5
5
T10
VCCIO5
5
VCCIO5
5
T11
VCCIO5
5
VCCIO5
5
T9
VCCIO5
5
VCCIO5
5
N7
VCCIO6
6
VCCIO6
6
P7
VCCIO6
6
VCCIO6
6
P8
VCCIO6
6
VCCIO6
6
R8
VCCIO6
6
VCCIO6
6
J8
VCCIO7
7
VCCIO7
7
K7
VCCIO7
7
VCCIO7
7
L7
VCCIO7
7
VCCIO7
7
M7
VCCIO7
7
VCCIO7
7
P15
VCCIO8
8
VCCIO8
8
R15
VCCIO8
8
VCCIO8
8
C5
VCCAUX
-
VCCAUX
-
D11
VCCAUX
-
VCCAUX
-
E17
VCCAUX
-
VCCAUX
-
E6
VCCAUX
-
VCCAUX
-
4-57
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
Ball
Number
Ball/Pad
Function
Bank
F13
VCCAUX
G18
G5
LFE2-20E/20SE
Ball/Pad
Function
Bank
-
VCCAUX
-
VCCAUX
-
VCCAUX
-
VCCAUX
-
VCCAUX
-
Dual Function
Differential
K5
VCCAUX
-
VCCAUX
-
M17
VCCAUX
-
VCCAUX
-
P17
VCCAUX
-
VCCAUX
-
R5
VCCAUX
-
VCCAUX
-
V11
VCCAUX
-
VCCAUX
-
V13
VCCAUX
-
VCCAUX
-
V15
VCCAUX
-
VCCAUX
-
V7
VCCAUX
-
VCCAUX
-
V8
VCCAUX
-
VCCAUX
-
A1
GND
-
GND
-
A22
GND
-
GND
-
AA19
GND
-
GND
-
AA4
GND
-
GND
-
AB1
GND
-
GND
-
AB22
GND
-
GND
-
B19
GND
-
GND
-
B4
GND
-
GND
-
C14
GND
-
GND
-
C9
GND
-
GND
-
D2
GND
-
GND
-
D21
GND
-
GND
-
F17
GND
-
GND
-
F6
GND
-
GND
-
H10
GND
-
GND
-
H11
GND
-
GND
-
H12
GND
-
GND
-
H13
GND
-
GND
-
J14
GND
-
GND
-
J20
GND
-
GND
-
J3
GND
-
GND
-
J9
GND
-
GND
-
K10
GND
-
GND
-
K11
GND
-
GND
-
K12
GND
-
GND
-
K13
GND
-
GND
-
K15
GND
-
GND
-
K8
GND
-
GND
-
L10
GND
-
GND
-
L11
GND
-
GND
-
L12
GND
-
GND
-
L13
GND
-
GND
-
L15
GND
-
GND
-
4-58
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-12E/SE and LFE2-20E/SE Logic Signal Connections: 484 fpBGA
LFE2-12E/12SE
Ball
Number
Ball/Pad
Function
Bank
L8
GND
M10
M11
LFE2-20E/20SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
M12
GND
-
GND
-
M13
GND
-
GND
-
M15
GND
-
GND
-
M8
GND
-
GND
-
N10
GND
-
GND
-
N11
GND
-
GND
-
N12
GND
-
GND
-
N13
GND
-
GND
-
N15
GND
-
GND
-
N8
GND
-
GND
-
P14
GND
-
GND
-
P20
GND
-
GND
-
P3
GND
-
GND
-
P9
GND
-
GND
-
R10
GND
-
GND
-
R11
GND
-
GND
-
R12
GND
-
GND
-
R13
GND
-
GND
-
U17
GND
-
GND
-
U6
GND
-
GND
-
Dual Function
Differential
W2
GND
-
GND
-
W21
GND
-
GND
-
Y14
GND
-
GND
-
Y9
GND
-
GND
-
H6
NC
-
NC
-
J6
NC
-
NC
-
H3
NC
-
NC
-
H2
NC
-
NC
-
H17
NC
-
NC
-
H16
NC
-
NC
-
H20
NC
-
NC
-
H18
NC
-
NC
-
K6
NC
-
NC
-
J16
NC
-
NC
-
N18
VCC
-
VCC
-
N6
VCC
-
VCC
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-59
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
E4
PL2A
7
VREF2_7/LDQ6
E5
PL2B
7
VREF1_7/LDQ6
LFE2-50E/SE
Differential
Ball/Pad
Function
Bank
Dual Function
T (LVDS)*
PL2A
7
VREF2_7
T (LVDS)*
C (LVDS)*
PL2B
7
VREF1_7
C (LVDS)*
LDQ16
T (LVDS)*
C (LVDS)*
Differential
VCCIO
VCCIO7
-
GNDIO7
-
GNDIO
GNDIO7
-
VCCIO
7
E3
PL10A
7
LDQ14
T (LVDS)*
PL12A
7
F3
PL10B
7
LDQ14
C (LVDS)*
PL12B
7
LDQ16
F4
PL11A
7
LDQ14
T
PL13A
7
LDQ16
T
F5
PL11B
7
LDQ14
C
PL13B
7
LDQ16
C
E2
PL12A
7
LDQ14
T (LVDS)*
PL14A
7
LDQ16
T (LVDS)*
VCCIO
VCCIO7
7
VCCIO
7
C (LVDS)*
E1
PL12B
7
LDQ14
C (LVDS)*
PL14B
7
LDQ16
G6
PL13A
7
LDQ14
T
PL15A
7
LDQ16
T
G7
PL13B
7
LDQ14
C
PL15B
7
LDQ16
C
LDQS14
T (LVDS)*
PL16A
7
LDQS16
T (LVDS)*
GNDIO7
C (LVDS)*
H4
PL14A
7
GNDIO
GNDIO7
-
H5
PL14B
7
LDQ14
C (LVDS)*
PL16B
7
LDQ16
F1
PL15A
7
LDQ14
T
PL17A
7
LDQ16
T
F2
PL15B
7
LDQ14
C
PL17B
7
LDQ16
C
VCCIO
VCCIO7
7
VCCIO
7
G3
PL16A
7
LDQ14
T (LVDS)*
PL18A
7
LDQ16
T (LVDS)*
G4
PL16B
7
LDQ14
C (LVDS)*
PL18B
7
LDQ16
C (LVDS)*
G1
PL17A
7
LDQ14
T
PL19A
7
LDQ16
T
G2
PL17B
7
LDQ14
C
PL19B
7
LDQ16
C
GNDIO
GNDIO7
-
GNDIO7
-
-
-
-
VCCIO
7
H6
NC
-
PL25A
7
LUM0_SPLLT_IN_A/LDQ24
T
-
-
-
VCCIO
7
J6
NC
-
PL25B
7
LUM0_SPLLC_IN_A/LDQ24
C
H3
NC
-
PL26A
7
LUM0_SPLLT_FB_A/LDQ24
T
H2
NC
-
PL26B
7
LUM0_SPLLC_FB_A/LDQ24
C
-
-
-
GNDIO7
-
VCCIO
7
PL37A
-
-
-
H1
PL18A
7
LDQ22
7
LDQ41
J4
PL19A
7
LDQ22
T
PL38A
7
LDQ41
T
J5
PL19B
7
LDQ22
C
PL38B
7
LDQ41
C
VCCIO
VCCIO7
7
VCCIO
7
J2
PL20A
7
LDQ22
T (LVDS)*
PL39A
7
LDQ41
T (LVDS)*
C (LVDS)*
J1
PL20B
7
LDQ22
C (LVDS)*
PL39B
7
LDQ41
L6
PL21A
7
LDQ22
T
PL40A
7
LDQ41
T
L5
PL21B
7
LDQ22
C
PL40B
7
LDQ41
C
GNDIO
GNDIO7
-
GNDIO7
-
K3
PL22A
7
LDQS22
T (LVDS)*
PL41A
7
LDQS41
T (LVDS)*
K4
PL22B
7
LDQ22
C (LVDS)*
PL41B
7
LDQ41
C (LVDS)*
LDQ22
T
LDQ41
T
K2
PL23A
7
VCCIO
VCCIO7
7
K1
PL23B
7
LDQ22
L4
PL24A
7
LDQ22
PL42A
7
VCCIO
7
C
PL42B
7
LDQ41
C
T (LVDS)*
PL43A
7
LDQ41
T (LVDS)*
4-60
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
L3
PL24B
7
LDQ22
PCLKT7_0/LDQ22
T
L2
PL25A
7
GNDIO
GNDIO7
-
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
C (LVDS)*
PL43B
7
LDQ41
C (LVDS)*
PCLKT7_0/LDQ41
T
PL44A
7
GNDIO7
-
L1
PL25B
7
PCLKC7_0/LDQ22
C
PL44B
7
PCLKC7_0/LDQ41
C
M5
PL27A
6
PCLKT6_0/LDQ31
T (LVDS)*
PL46A
6
PCLKT6_0/LDQ50
T (LVDS)*
M6
PL27B
6
PCLKC6_0/LDQ31
C (LVDS)*
PL46B
6
PCLKC6_0/LDQ50
C (LVDS)*
M3
PL28A
6
VREF2_6/LDQ31
T
PL47A
6
VREF2_6/LDQ50
T
M4
PL28B
6
VREF1_6/LDQ31
C
PL47B
6
VREF1_6/LDQ50
C
M2
PL29A
6
LDQ31
T (LVDS)*
PL48A
6
LDQ50
T (LVDS)*
VCCIO
VCCIO6
6
VCCIO
6
M1
PL29B
6
LDQ31
C (LVDS)*
PL48B
6
LDQ50
C (LVDS)*
N1
PL30A
6
LDQ31
T
PL49A
6
LDQ50
T
N2
PL30B
6
LDQ31
C
PL49B
6
LDQ50
C
GNDIO
GNDIO6
-
GNDIO6
-
VCCIO
VCCIO6
6
VCCIO
6
N3
PL39A
6
LDQS39***
T (LVDS)*
PL58A
6
LDQS58***
T (LVDS)*
N4
PL39B
6
LDQ39
C (LVDS)*
PL58B
6
LDQ58
C (LVDS)*
LDQ39
T
LDQ58
T
N5
PL40A
6
VCCIO
VCCIO6
6
PL59A
6
VCCIO
6
P5
PL40B
6
LDQ39
P1
PL41A
6
LLM0_GDLLT_IN_A**/LDQ39
C
PL59B
6
LDQ58
C
T (LVDS)*
PL60A
6
LLM0_GDLLT_IN_A**/LDQ58
T (LVDS)*
P2
PL41B
6
LLM0_GDLLC_IN_A**/LDQ39
C (LVDS)*
P4
PL42A
6
LLM0_GDLLT_FB_A/LDQ39
T
PL60B
6
LLM0_GDLLC_IN_A**/LDQ58
C (LVDS)*
PL61A
6
LLM0_GDLLT_FB_A/LDQ58
GNDIO
GNDIO6
-
GNDIO6
-
T
R4
PL42B
6
PL61B
6
LLM0_GDLLC_FB_D/LDQ58
C
LLM0_GDLLC_FB_A/LDQ39
C
P6
LLM0_PLLCAP
6
LLM0_PLLCAP
6
R1
PL44A
6
LLM0_GPLLT_IN_A**/LDQ48
T (LVDS)*
PL63A
6
LLM0_GPLLT_IN_A**/LDQ67
T (LVDS)*
R2
PL44B
6
LLM0_GPLLC_IN_A**/LDQ48
C (LVDS)*
PL63B
6
LLM0_GPLLC_IN_A**/LDQ67
C (LVDS)*
R3
PL45A
6
LLM0_GPLLT_FB_A/LDQ48
T
PL64A
6
LLM0_GPLLT_FB_A/LDQ67
T
T4
PL45B
6
LLM0_GPLLC_FB_A/LDQ48
C
PL64B
6
LLM0_GPLLC_FB_A/LDQ67
C
LDQ48
T (LVDS)*
LDQ67
T (LVDS)*
C (LVDS)*
T1
PL46A
6
VCCIO
VCCIO6
6
PL65A
6
VCCIO
6
T2
PL46B
6
LDQ48
C (LVDS)*
PL65B
6
LDQ67
T5
PL47A
6
T3
PL47B
6
LDQ48
T
PL66A
6
LDQ67
T
LDQ48
C
PL66B
6
LDQ67
C
GNDIO
GNDIO6
VCCIO
VCCIO6
-
VCCIO
6
-
GNDIO6
U1
PL52A
6
LDQ56
-
T (LVDS)*
PL71A
6
U2
PL52B
6
LDQ56
LDQ75
T (LVDS)*
C (LVDS)*
PL71B
6
LDQ75
C (LVDS)*
V1
PL53A
6
V2
PL53B
6
LDQ56
T
PL72A
6
LDQ75
T
LDQ56
C
PL72B
6
LDQ75
C
VCCIO
VCCIO6
6
R6
PL54A
VCCIO
6
6
LDQ56
T (LVDS)*
PL73A
T6
6
LDQ75
T (LVDS)*
PL54B
6
LDQ56
C (LVDS)*
PL73B
6
LDQ75
C (LVDS)*
U3
PL55A
6
LDQ56
T
PL74A
6
LDQ75
T
U4
PL55B
6
LDQ56
C
PL74B
6
LDQ75
C
GNDIO
GNDIO6
-
GNDIO6
-
4-61
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
Y1
PL56A
6
LDQS56
Bank
Dual Function
Differential
T (LVDS)*
PL75A
6
LDQS75
T (LVDS)*
W1
PL56B
6
LDQ56
C (LVDS)*
PL75B
R7
PL57A
6
LDQ56
T
PL76A
6
LDQ75
C (LVDS)*
6
LDQ75
VCCIO
VCCIO6
6
VCCIO
6
T
T7
PL57B
6
LDQ56
C
PL76B
6
LDQ75
C
V4
PL58A
6
LDQ56
T (LVDS)*
PL77A
6
LDQ75
T (LVDS)*
V3
PL58B
6
LDQ56
C (LVDS)*
PL77B
6
LDQ75
C (LVDS)*
AA2
PL59A
6
LDQ56
T
PL78A
6
LDQ75
T
GNDIO
GNDIO6
-
GNDIO6
-
AA1
PL59B
6
PL78B
6
LDQ75
C
U7
TCK
-
TCK
-
U5
TDI
-
TDI
-
V5
TMS
-
TMS
-
V6
TDO
-
TDO
-
T8
VCCJ
-
VCCJ
-
Y3
PB2A
5
VREF2_5/BDQ6
T
PB2A
5
VREF2_5/BDQ6
T
Y2
PB2B
5
VREF1_5/BDQ6
C
PB2B
5
VREF1_5/BDQ6
C
W4
PB3A
5
BDQ6
T
PB3A
5
BDQ6
T
W3
PB3B
5
BDQ6
C
PB3B
5
BDQ6
C
W5
PB4A
5
BDQ6
T
PB4A
5
BDQ6
T
W6
PB4B
5
BDQ6
C
PB4B
5
BDQ6
C
VCCIO
VCCIO5
5
VCCIO
5
AB3
PB5A
5
BDQ6
T
PB5A
5
BDQ6
T
AB2
PB5B
5
BDQ6
C
PB5B
5
BDQ6
C
GNDIO
GNDIO5
-
GNDIO5
-
LDQ56
C
Y4
PB6A
5
BDQS6
T
PB6A
5
BDQS6
T
AA3
PB6B
5
BDQ6
C
PB6B
5
BDQ6
C
AB5
PB7A
5
BDQ6
T
PB7A
5
BDQ6
T
AB4
PB7B
5
BDQ6
C
PB7B
5
BDQ6
C
AA5
PB8A
5
BDQ6
T
PB8A
5
BDQ6
T
Y5
PB8B
5
BDQ6
C
PB8B
5
BDQ6
C
VCCIO
VCCIO5
5
AB6
PB9A
5
BDQ6
T
BDQ6
C
VCCIO
5
PB9A
5
BDQ6
T
PB9B
5
BDQ6
C
GNDIO5
-
AA6
PB9B
5
GNDIO
GNDIO5
-
VCCIO
VCCIO5
5
VCCIO
5
W7
PB20A
5
BDQ24
T
PB29A
5
BDQ33
T
W8
PB20B
5
BDQ24
C
PB29B
5
BDQ33
C
Y6
PB21A
5
BDQ24
T
PB30A
5
BDQ33
T
Y7
PB21B
5
BDQ24
C
PB30B
5
BDQ33
C
AA7
PB22A
5
BDQ24
T
PB31A
5
BDQ33
T
VCCIO
VCCIO5
5
VCCIO
5
AB7
PB22B
5
BDQ24
C
PB31B
5
BDQ33
C
U8
PB23A
5
BDQ24
T
PB32A
5
BDQ33
T
U9
PB23B
5
BDQ24
C
PB32B
5
BDQ33
C
W9
PB24A
5
BDQS24
T
PB33A
5
BDQS33
T
GNDIO
GNDIO5
-
GNDIO5
-
4-62
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
V9
PB24B
5
BDQ24
LFE2-50E/SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
C
PB33B
5
BDQ33
C
Y8
PB25A
5
BDQ24
T
PB34A
5
BDQ33
T
AA8
PB25B
5
BDQ24
C
PB34B
5
BDQ33
C
BDQ24
T
BDQ33
T
C
W10
PB26A
5
VCCIO
VCCIO5
5
PB35A
5
VCCIO
5
V10
PB26B
5
BDQ24
C
PB35B
5
BDQ33
AB8
PB27A
5
BDQ24
T
PB36A
5
BDQ33
T
AA9
PB27B
5
BDQ24
C
PB36B
5
BDQ33
C
GNDIO
GNDIO5
-
GNDIO5
-
AB9
PB29A
5
BDQ33
T
PB38A
5
BDQ42
T
AB10
PB29B
5
BDQ33
C
PB38B
5
BDQ42
C
Y10
PB30A
5
BDQ33
T
PB39A
5
BDQ42
T
AA10
PB30B
5
BDQ33
C
PB39B
5
BDQ42
C
U10
PB31A
5
BDQ33
T
PB40A
5
BDQ42
T
U11
PB31B
5
BDQ33
C
PB40B
5
BDQ42
C
VCCIO
VCCIO5
5
VCCIO
5
AB11
PB32A
5
BDQ33
T
PB41A
5
BDQ42
T
BDQ33
C
BDQ42
C
AA11
PB32B
5
GNDIO
GNDIO5
-
PB41B
5
GNDIO5
-
Y11
PB33A
5
BDQS33
T
PB42A
5
BDQS42
T
W11
PB33B
5
BDQ33
C
PB42B
5
BDQ42
C
AB12
PB34A
5
BDQ33
T
PB43A
5
BDQ42
T
AA12
PB34B
5
BDQ33
C
PB43B
5
BDQ42
C
AB13
PB35A
5
PCLKT5_0/BDQ33
T
PB44A
5
PCLKT5_0/BDQ42
T
AB14
PB35B
5
PCLKC5_0/BDQ33
C
PB44B
5
PCLKC5_0/BDQ42
C
5
PCLKT4_0/BDQ51
T
C
VCCIO
VCCIO5
5
VCCIO
GNDIO
GNDIO5
-
GNDIO5
-
U12
PB40A
4
PB49A
4
VCCIO
VCCIO4
4
VCCIO
4
V12
PB40B
4
PCLKC4_0/BDQ42
C
PB49B
4
PCLKC4_0/BDQ51
Y12
PB41A
4
BDQ42
T
PB50A
4
BDQ51
T
W12
PB41B
4
BDQ42
C
PB50B
4
BDQ51
C
AA13
PB42A
4
BDQS42
T
PB51A
4
BDQS51
T
GNDIO
GNDIO4
-
GNDIO4
-
Y13
PB42B
4
BDQ42
C
PB51B
4
BDQ51
C
U13
PB43A
4
BDQ42
T
PB52A
4
BDQ51
T
U14
PB43B
4
BDQ42
C
PB52B
4
BDQ51
C
BDQ42
T
PB53A
4
BDQ51
T
VCCIO
4
PCLKT4_0/BDQ42
T
AB15
PB44A
4
VCCIO
VCCIO4
4
AA14
PB44B
4
BDQ42
C
PB53B
4
BDQ51
C
AB16
PB45A
4
BDQ42
T
PB54A
4
BDQ51
T
AB17
PB45B
4
BDQ42
C
PB54B
4
BDQ51
C
W13
PB46A
4
BDQ42
T
PB55A
4
BDQ51
T
GNDIO
GNDIO4
-
GNDIO4
C
W14
PB46B
4
BDQ42
C
PB55B
4
BDQ51
AB18
PB48A
4
BDQ51
T
PB57A
4
BDQ60
T
AB19
PB48B
4
BDQ51
C
PB57B
4
BDQ60
C
4-63
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
V14
PB49A
4
BDQ51
BDQ51
C
W15
PB49B
4
VCCIO
VCCIO4
4
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
T
PB58A
4
BDQ60
T
BDQ60
C
PB58B
4
VCCIO
4
Y15
PB50A
4
BDQ51
T
PB59A
4
BDQ60
T
AA15
PB50B
4
BDQ51
C
PB59B
4
BDQ60
C
GNDIO
GNDIO4
-
GNDIO4
-
AA16
PB51A
4
BDQS51
T
PB60A
4
BDQS60
T
AA17
PB51B
4
BDQ51
C
PB60B
4
BDQ60
C
AB20
PB52A
4
BDQ51
T
PB61A
4
BDQ60
T
C
AB21
PB52B
4
BDQ51
C
PB61B
4
BDQ60
U15
PB53A
4
BDQ51
T
PB62A
4
BDQ60
T
U16
PB53B
4
BDQ51
C
PB62B
4
BDQ60
C
VCCIO
VCCIO4
4
VCCIO
4
Y16
PB54A
4
BDQ51
T
PB63A
4
BDQ60
T
W16
PB54B
4
BDQ51
C
PB63B
4
BDQ60
C
AA18
PB55A
4
BDQ51
T
PB64A
4
BDQ60
T
AA20
PB55B
4
BDQ51
C
PB64B
4
BDQ60
C
GNDIO
GNDIO4
-
GNDIO4
-
VCCIO
VCCIO4
4
VCCIO
4
AA21
PB66A
4
BDQ69
T
PB75A
4
BDQ78
T
AA22
PB66B
4
BDQ69
C
PB75B
4
BDQ78
C
V16
PB67A
4
BDQ69
T
PB76A
4
BDQ78
T
V17
PB67B
4
BDQ69
C
PB76B
4
BDQ78
C
VCCIO
VCCIO4
4
VCCIO
4
Y18
PB68A
4
BDQ69
T
PB77A
4
BDQ78
T
BDQ69
C
BDQ78
C
Y17
PB68B
4
GNDIO
GNDIO4
-
PB77B
4
GNDIO4
-
Y19
PB69A
4
BDQS69
Y20
PB69B
4
BDQ69
T
PB78A
4
BDQS78
T
C
PB78B
4
BDQ78
C
W17
PB70A
4
BDQ69
W18
PB70B
4
BDQ69
T
PB79A
4
BDQ78
T
C
PB79B
4
BDQ78
C
Y21
PB71A
4
BDQ69
Y22
PB71B
4
BDQ69
T
PB80A
4
BDQ78
T
C
PB80B
4
BDQ78
C
VCCIO
VCCIO4
4
VCCIO
4
U18
PB72A
4
BDQ69
T
PB81A
4
BDQ78
T
V18
PB72B
4
BDQ69
C
PB81B
4
BDQ78
C
T15
PB73A
4
VREF2_4/BDQ69
T
PB82A
4
VREF2_4/BDQ78
T
T16
PB73B
4
VREF1_4/BDQ69
C
PB82B
4
VREF1_4/BDQ78
C
GNDIO
GNDIO4
-
GNDIO4
-
W19
CFG2
8
CFG2
8
V19
CFG1
8
CFG1
8
W20
CFG0
8
CFG0
8
V20
PROGRAMN
8
PROGRAMN
8
W22
CCLK
8
CCLK
8
V22
INITN
8
INITN
8
V21
DONE
8
DONE
8
GNDIO
GNDIO8
-
GNDIO8
-
4-64
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
R16
PR58B
8
WRITEN
Bank
Dual Function
Differential
C
PR77B
8
WRITEN
C
R17
PR58A
8
U19
PR57B
8
CS1N
T
PR77A
8
CS1N
T
CSN
C
PR76B
8
CSN
C
D0/SPIFASTN
T
PR76A
8
D0/SPIFASTN
T
VCCIO
8
C
U20
PR57A
8
VCCIO
VCCIO8
8
U22
PR56B
8
D1
C
PR75B
8
D1
U21
PR56A
8
D2
T
PR75A
8
D2
T
T20
PR55B
8
D3
C
PR74B
8
D3
C
GNDIO
GNDIO8
-
GNDIO8
-
T19
PR55A
8
D4
T
PR74A
8
D4
T
T17
PR54B
8
D5
C
PR73B
8
D5
C
T18
PR54A
8
D6
T
PR73A
8
D6
T
T21
PR53B
8
D7
C
PR72B
8
D7
C
VCCIO
VCCIO8
8
VCCIO
8
T22
PR53A
8
DI/CSSPI0N
T
PR72A
8
DI/CSSPI0N
T
R18
PR52B
8
DOUT/CSON
C
PR71B
8
DOUT/CSON
C
R19
PR52A
8
BUSY/SISPI
T
PR71A
8
BUSY/SISPI
T
GNDIO
GNDIO3
-
GNDIO3
-
VCCIO
VCCIO3
3
VCCIO
3
R22
PR47B
3
RDQ48
C
PR66B
3
RDQ67
C
R21
PR47A
3
RDQ48
T
PR66A
3
RDQ67
T
P18
PR46B
3
RDQ48
C (LVDS)*
PR65B
3
RDQ67
C (LVDS)*
RDQ48
T (LVDS)*
PR65A
3
RDQ67
T (LVDS)*
VCCIO
3
C
PR64B
3
RLM0_GPLLC_FB_A/RDQ67
C
P19
PR46A
3
VCCIO
VCCIO3
3
R20
PR45B
3
P22
PR45A
3
RLM0_GPLLT_FB_A/RDQ48
T
PR64A
3
RLM0_GPLLT_FB_A/RDQ67
T
P21
PR44B
3
RLM0_GPLLC_IN_A**/RDQ48
C (LVDS)*
PR63B
3
RLM0_GPLLC_IN_A**/RDQ67
C (LVDS)*
N21
PR44A
3
RLM0_GPLLT_IN_A**/RDQ48
T (LVDS)*
RLM0_GPLLT_IN_A**/RDQ67
T (LVDS)*
N17
RLM0_PLLCAP
3
N22
PR42B
3
RLM0_GDLLC_FB_A/RDQ39
N20
PR42A
3
RLM0_GDLLT_FB_A/RDQ39
GNDIO
GNDIO3
-
M22
PR41B
3
RLM0_GDLLC_IN_A**/RDQ39
C (LVDS)*
M21
PR41A
3
RLM0_GDLLT_IN_A**/RDQ39
T (LVDS)*
N19
PR40B
3
RDQ39
C
M19
PR40A
3
RDQ39
T
VCCIO
VCCIO3
3
GNDIO
GNDIO3
-
GNDIO3
-
L22
PR30B
3
RDQ31
C
PR49B
K22
PR30A
3
RDQ31
T
J22
PR29B
3
RDQ31
RDQ31
RLM0_GPLLC_FB_A/RDQ48
PR63A
3
RLM0_PLLCAP
3
C
PR61B
3
RLM0_GDLLC_FB_A/RDQ58
C
T
PR61A
3
RLM0_GDLLT_FB_A/RDQ58
T
GNDIO3
-
PR60B
3
RLM0_GDLLC_IN_A**/RDQ58
C (LVDS)*
PR60A
3
RLM0_GDLLT_IN_A**/RDQ58
T (LVDS)*
PR59B
3
RDQ58
C
PR59A
3
RDQ58
T
VCCIO
3
3
RDQ50
C
PR49A
3
RDQ50
T
C (LVDS)*
PR48B
3
RDQ50
C (LVDS)*
T (LVDS)*
PR48A
3
RDQ50
T (LVDS)*
VCCIO
3
C
H22
PR29A
3
VCCIO
VCCIO3
3
M20
PR28B
3
VREF2_3/RDQ31
C
PR47B
3
VREF2_3/RDQ50
L21
PR28A
3
VREF1_3/RDQ31
T
PR47A
3
VREF1_3/RDQ50
T
K21
PR27B
3
PCLKC3_0/RDQ31
C (LVDS)*
PR46B
3
PCLKC3_0/RDQ50
C (LVDS)*
J21
PR27A
3
PCLKT3_0/RDQ31
T (LVDS)*
PR46A
3
PCLKT3_0/RDQ50
T (LVDS)*
4-65
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
M18
PR25B
2
PCLKC2_0/RDQ22
Bank
Dual Function
Differential
C
PR44B
2
PCLKC2_0/RDQ41
C
PCLKT2_0/RDQ22
T
PCLKT2_0/RDQ41
T
L17
PR25A
2
GNDIO
GNDIO2
-
PR44A
2
GNDIO2
-
L19
PR24B
2
RDQ22
L20
PR24A
2
RDQ22
C (LVDS)*
PR43B
2
RDQ41
C (LVDS)*
T (LVDS)*
PR43A
2
RDQ41
L18
PR23B
2
T (LVDS)*
RDQ22
C
PR42B
2
RDQ41
K17
PR23A
2
C
RDQ22
T
PR42A
2
RDQ41
VCCIO
VCCIO2
2
T
VCCIO
2
K18
PR22B
2
RDQ22
C (LVDS)*
PR41B
2
RDQ41
C (LVDS)*
K19
PR22A
2
RDQS22
T (LVDS)*
PR41A
2
RDQS41
T (LVDS)*
G22
PR21B
2
RDQ22
C
PR40B
2
RDQ41
C
GNDIO
GNDIO2
-
GNDIO2
-
F22
PR21A
2
RDQ22
T
PR40A
2
RDQ41
T
J17
PR20B
2
RDQ22
C (LVDS)*
PR39B
2
RDQ41
C (LVDS)*
J18
PR20A
2
RDQ22
T (LVDS)*
PR39A
2
RDQ41
T (LVDS)*
K20
PR19B
2
RDQ22
C
PR38B
2
RDQ41
C
VCCIO
VCCIO2
2
VCCIO
2
J19
PR19A
2
RDQ22
T
PR38A
2
RDQ41
T
H21
PR18B
2
RDQ22
C (LVDS)*
PR37B
2
RDQ41
C (LVDS)*
G21
PR18A
2
RDQ22
T (LVDS)*
RDQ41
T (LVDS)*
-
-
-
C
PR37A
2
GNDIO2
-
-
-
-
VCCIO
2
H17
NC
-
PR26B
2
RUM0_SPLLC_FB_A/RDQ24
H16
NC
-
PR26A
2
RUM0_SPLLT_FB_A/RDQ24
T
H20
NC
-
PR25B
2
RUM0_SPLLC_IN_A/RDQ24
C
H18
NC
-
PR25A
2
RUM0_SPLLT_IN_A/RDQ24
T
-
-
-
GNDIO2
RDQ16
C
-
-
-
F21
PR17B
2
GNDIO
GNDIO2
-
RDQ14
C
VCCIO
2
PR19B
2
GNDIO2
-
E22
PR17A
2
RDQ14
T
PR19A
2
RDQ16
T
D22
PR16B
2
RDQ14
C (LVDS)*
PR18B
2
RDQ16
C (LVDS)*
E21
PR16A
2
RDQ14
T (LVDS)*
PR18A
2
RDQ16
T (LVDS)*
RDQ14
C
PR17B
2
RDQ16
C
VCCIO
2
G20
PR15B
2
VCCIO
VCCIO2
2
F20
PR15A
2
RDQ14
T
PR17A
2
RDQ16
T
H19
PR14B
2
RDQ14
C (LVDS)*
PR16B
2
RDQ16
C (LVDS)*
G19
PR14A
2
RDQS14
T (LVDS)*
RDQS16
T (LVDS)*
GNDIO
GNDIO2
-
PR16A
2
GNDIO2
-
G17
PR13B
2
RDQ14
C
PR15B
2
RDQ16
C
F19
PR13A
2
RDQ14
T
PR15A
2
RDQ16
T
E20
PR12B
2
RDQ14
C (LVDS)*
PR14B
2
RDQ16
C (LVDS)*
D20
PR12A
2
RDQ14
T (LVDS)*
PR14A
2
RDQ16
T (LVDS)*
VCCIO
VCCIO2
2
VCCIO
2
F18
PR11B
2
RDQ14
C
PR13B
2
RDQ16
C
F16
PR11A
2
RDQ14
T
PR13A
2
RDQ16
T
C21
PR10B
2
RDQ14
C (LVDS)*
PR12B
2
RDQ16
C (LVDS)*
4-66
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
C22
PR10A
2
RDQ14
LFE2-50E/SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
T (LVDS)*
PR12A
2
RDQ16
T (LVDS)*
2
VCCIO
VCCIO2
2
VCCIO
GNDIO
GNDIO2
-
GNDIO2
-
D19
PR2B
2
VREF2_2/RDQ6
C (LVDS)*
PR2B
2
VREF2_2
C (LVDS)*
E19
PR2A
2
VREF1_2/RDQ6
T (LVDS)*
PR2A
2
VREF1_2
T (LVDS)*
B21
PT73B
1
VREF2_1
C
PT82B
1
VREF2_1
C
GNDIO
GNDIO1
-
GNDIO1
-
B22
PT73A
1
C20
PT72B
1
VREF1_1
T
PT82A
1
C
PT81B
1
VREF1_1
T
C19
PT72A
D18
PT71B
1
T
PT81A
1
T
1
C
PT80B
1
C
VCCIO
VCCIO1
1
VCCIO
1
E18
PT71A
1
T
PT80A
1
T
B20
PT70B
1
C
PT79B
1
C
C
A19
PT70A
1
T
PT79A
1
T
D17
PT69B
1
C
PT78B
1
C
C18
PT69A
1
T
PT78A
1
T
C
C
A21
PT68B
1
GNDIO
GNDIO1
-
PT77B
1
GNDIO1
-
A20
PT68A
1
A18
PT67B
1
T
PT77A
1
T
C
PT76B
1
C
VCCIO
VCCIO1
1
VCCIO
1
B18
PT67A
1
T
PT76A
1
T
G16
PT66B
1
C
PT75B
1
C
G15
PT66A
1
T
PT75A
1
T
D16
PT65B
1
C
PT74B
1
C
E16
PT65A
1
T
PT74A
1
T
GNDIO
GNDIO1
-
GNDIO1
-
VCCIO
VCCIO1
1
C17
PT55B
1
GNDIO
GNDIO1
-
C16
PT55A
1
B17
PT54B
1
B16
PT54A
1
A17
PT53B
1
VCCIO
VCCIO1
1
VCCIO
1
A16
PT53A
1
T
PT62A
1
T
C15
PT52B
1
C
PT61B
1
C
D15
PT52A
1
T
PT61A
1
T
E15
PT51B
1
C
PT60B
1
C
F15
PT51A
1
T
PT60A
1
T
GNDIO
GNDIO1
-
B15
PT49B
1
VCCIO
VCCIO1
1
A15
PT49A
1
B14
PT48B
1
A14
PT48A
1
T
VCCIO
1
PT64B
1
GNDIO1
-
T
PT64A
1
T
C
PT63B
1
C
T
PT63A
1
T
C
PT62B
1
C
C
C
GNDIO1
-
PT58B
1
VCCIO
1
T
PT58A
1
T
C
PT57B
1
C
PT57A
1
T
C
4-67
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
D14
PT46B
1
C13
PT46A
1
T
GNDIO
GNDIO1
-
E14
PT45B
1
C
PT54B
1
F14
PT45A
1
T
PT54A
1
T
A13
PT44B
1
C
PT53B
1
C
T
T
B13
PT44A
1
VCCIO
VCCIO1
1
E13
PT43B
1
D13
PT43A
E12
PT42B
Dual Function
Differential
Ball/Pad
Function
Bank
C
PT55B
1
C
PT55A
1
T
GNDIO1
-
Dual Function
Differential
C
PT53A
1
VCCIO
1
C
PT52B
1
1
T
PT52A
1
T
1
C
PT51B
1
C
T
PT51A
1
T
GNDIO1
-
C
D12
PT42A
1
GNDIO
GNDIO1
-
A12
PT40B
1
C
PT49B
1
C
A11
PT40A
1
T
PT49A
1
T
VCCIO
VCCIO1
1
VCCIO
1
B12
PT39B
1
PCLKC1_0
C
PT48B
1
PCLKC1_0
C
C12
PT39A
1
PCLKT1_0
T
PT48A
1
PCLKT1_0
T
F12
XRES
1
XRES
1
PCLKC0_0
C
B10
PT37B
0
GNDIO
GNDIO0
-
B11
PT37A
0
A10
PT36B
0
PCLKC0_0
PCLKT0_0
C
PT46B
0
GNDIO0
0
T
PT46A
0
C
PT45B
0
PCLKT0_0
T
C
A9
PT36A
0
T
PT45A
0
T
C11
PT35B
0
C
PT44B
0
C
VCCIO
VCCIO0
0
VCCIO
0
C10
PT35A
0
T
PT44A
0
T
E11
PT34B
0
C
PT43B
0
C
F11
PT34A
0
T
PT43A
0
T
A8
PT33B
0
C
PT42B
0
C
A7
PT33A
0
T
PT42A
0
T
B8
PT32B
0
C
PT41B
0
C
GNDIO
GNDIO0
-
GNDIO0
0
PT41A
0
VCCIO
0
B9
PT32A
0
VCCIO
VCCIO0
0
B7
PT30B
0
C
PT39B
0
A6
PT30A
0
T
PT39A
0
T
C8
PT29B
0
C
PT38B
0
C
T
T
D8
PT29A
0
GNDIO
GNDIO0
-
D10
PT27B
0
E10
PT27A
C7
PT26B
T
T
C
PT38A
0
GNDIO0
0
C
PT36B
0
0
T
PT36A
0
T
0
C
PT35B
0
C
T
PT35A
0
T
VCCIO
0
C
C6
PT26A
0
VCCIO
VCCIO0
0
B6
PT25B
0
C
PT34B
0
C
B5
PT25A
0
T
PT34A
0
T
4-68
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
F10
PT24B
0
T
D9
PT24A
0
GNDIO
GNDIO0
-
Dual Function
Differential
Ball/Pad
Function
Bank
C
PT33B
0
C
PT33A
0
T
GNDIO0
0
Dual Function
Differential
F9
PT23B
0
C
PT32B
0
E9
PT23A
0
T
PT32A
0
T
A5
PT22B
0
C
PT31B
0
C
T
T
A4
PT22A
0
VCCIO
VCCIO0
0
A3
PT21B
0
A2
PT21A
G8
PT20B
C
PT31A
0
VCCIO
0
C
PT30B
0
0
T
PT30A
0
T
0
C
PT29B
0
C
T
T
PT29A
0
GNDIO0
0
VCCIO
0
C
E8
PT20A
0
GNDIO
GNDIO0
-
VCCIO
VCCIO0
0
C3
PT10B
0
C
PT10B
0
C
B3
PT10A
0
T
PT10A
0
T
GNDIO
GNDIO0
-
GNDIO0
0
F8
PT9B
0
C
PT9B
0
D7
PT9A
0
T
PT9A
0
C
T
E7
PT8B
0
C
PT8B
0
C
VCCIO
VCCIO0
0
VCCIO
0
F7
PT8A
0
T
PT8A
0
T
D5
PT7B
0
C
PT7B
0
C
D6
PT7A
0
T
PT7A
0
T
D4
PT6B
0
C
PT6B
0
C
T
PT6A
0
T
GNDIO0
0
C4
PT6A
0
GNDIO
GNDIO0
-
B2
PT5B
0
C
PT5B
0
B1
PT5A
0
T
PT5A
0
T
J7
PT4B
0
C
PT4B
0
C
VCCIO
VCCIO0
0
VCCIO
0
H7
PT4A
0
T
PT4A
0
T
D3
PT3B
0
C
PT3B
0
C
C2
PT3A
0
T
PT3A
0
D1
PT2B
0
VREF2_0
C
PT2B
0
VREF2_0
C
VREF1_0
T
VREF1_0
T
C1
PT2A
0
PT2A
0
J10
VCC
-
VCC
-
J11
VCC
-
VCC
-
J12
VCC
-
VCC
-
J13
VCC
-
VCC
-
K14
VCC
-
VCC
-
K9
VCC
-
VCC
L14
VCC
-
VCC
-
L9
VCC
-
VCC
-
M14
VCC
-
VCC
-
M9
VCC
-
VCC
-
N14
VCC
-
VCC
-
4-69
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
Ball
Number
Ball/Pad
Function
Bank
N9
VCC
P10
P11
LFE2-50E/SE
Ball/Pad
Function
Bank
-
VCC
-
VCC
-
VCC
-
VCC
-
VCC
-
P12
VCC
-
VCC
-
P13
VCC
-
VCC
-
G5
VCCAUX
-
VCCAUX
0
Dual Function
Differential
K5
VCCAUX
-
VCCAUX
0
R5
VCCAUX
-
VCCAUX
1
V7
VCCAUX
-
VCCAUX
1
V11
VCCAUX
-
VCCAUX
2
V8
VCCAUX
-
VCCAUX
2
V13
VCCAUX
-
VCCAUX
3
V15
VCCAUX
-
VCCAUX
3
M17
VCCAUX
-
VCCAUX
4
P17
VCCAUX
-
VCCAUX
4
E17
VCCAUX
-
VCCAUX
5
G18
VCCAUX
-
VCCAUX
5
D11
VCCAUX
-
VCCAUX
6
F13
VCCAUX
-
VCCAUX
6
C5
VCCAUX
-
VCCAUX
7
E6
VCCAUX
-
VCCAUX
7
G10
VCCIO0
0
VCCIO0
0
G9
VCCIO0
0
VCCIO0
0
H8
VCCIO0
0
VCCIO0
0
H9
VCCIO0
0
VCCIO0
0
G11
VCCIO1
1
VCCIO1
1
G12
VCCIO1
1
VCCIO1
1
G13
VCCIO1
1
VCCIO1
1
G14
VCCIO1
1
VCCIO1
1
H14
VCCIO2
2
VCCIO2
2
H15
VCCIO2
2
VCCIO2
2
J15
VCCIO2
2
VCCIO2
2
K16
VCCIO2
2
VCCIO2
2
L16
VCCIO3
3
VCCIO3
3
M16
VCCIO3
3
VCCIO3
3
N16
VCCIO3
3
VCCIO3
3
P16
VCCIO3
3
VCCIO3
3
R14
VCCIO4
4
VCCIO4
4
T12
VCCIO4
4
VCCIO4
4
T13
VCCIO4
4
VCCIO4
4
T14
VCCIO4
4
VCCIO4
4
R9
VCCIO5
5
VCCIO5
5
T10
VCCIO5
5
VCCIO5
5
T11
VCCIO5
5
VCCIO5
5
T9
VCCIO5
5
VCCIO5
5
N7
VCCIO6
6
VCCIO6
6
P7
VCCIO6
6
VCCIO6
6
4-70
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
Ball
Number
Ball/Pad
Function
Bank
P8
VCCIO6
R8
J8
LFE2-50E/SE
Ball/Pad
Function
Bank
6
VCCIO6
6
VCCIO6
6
VCCIO6
6
VCCIO7
7
VCCIO7
7
K7
VCCIO7
7
VCCIO7
7
L7
VCCIO7
7
VCCIO7
7
M7
VCCIO7
7
VCCIO7
7
P15
VCCIO8
8
VCCIO8
8
R15
VCCIO8
8
VCCIO8
8
A22
GND
-
GND
-
AA19
GND
-
GND
-
AA4
GND
-
GND
-
AB1
GND
-
GND
-
AB22
GND
-
GND
-
B19
GND
-
GND
-
Dual Function
Differential
B4
GND
-
GND
C14
GND
-
GND
-
C9
GND
-
GND
-
D2
GND
-
GND
-
D21
GND
-
GND
-
F17
GND
-
GND
-
F6
GND
-
GND
-
H10
GND
-
GND
-
H11
GND
-
GND
-
H12
GND
-
GND
-
H13
GND
-
GND
-
J14
GND
-
GND
-
J20
GND
-
GND
-
J3
GND
-
GND
-
J9
GND
-
GND
-
K10
GND
-
GND
-
K11
GND
-
GND
-
K12
GND
-
GND
-
K13
GND
-
GND
-
K15
GND
-
GND
-
K8
GND
-
GND
-
L10
GND
-
GND
-
L11
GND
-
GND
-
L12
GND
-
GND
-
L13
GND
-
GND
-
L15
GND
-
GND
-
L8
GND
-
GND
-
M10
GND
-
GND
-
M11
GND
-
GND
-
M12
GND
-
GND
-
M13
GND
-
GND
-
M15
GND
-
GND
-
M8
GND
-
GND
-
4-71
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-35E/SE and LFE2-50E/SE Logic Signal Connections: 484 fpBGA
LFE2-35E/SE
Ball
Number
Ball/Pad
Function
Bank
N10
GND
N11
N12
LFE2-50E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
N13
GND
-
GND
-
N15
GND
-
GND
-
N8
GND
-
GND
-
P14
GND
-
GND
-
P20
GND
-
GND
-
P3
GND
-
GND
-
Dual Function
Differential
P9
GND
-
GND
-
R10
GND
-
GND
-
R11
GND
-
GND
-
R12
GND
-
GND
-
R13
GND
-
GND
-
U17
GND
-
GND
-
U6
GND
-
GND
-
W2
GND
-
GND
-
W21
GND
-
GND
-
Y14
GND
-
GND
-
Y9
GND
-
GND
-
A1
GND
-
GND
-
N18
VCCPLL
-
VCCPLL
-
K6
NC
-
VCCPLL
-
N6
VCCPLL
-
VCCPLL
-
J16
NC
-
VCCPLL
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
***Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-72
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
LFE2-35E/35SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
D2
PL2A
7
VREF2_7
Bank
Dual Function
T (LVDS)*
PL2A
7
VREF2_7/LDQ6
D1
PL2B
7
VREF1_7
T (LVDS)*
C (LVDS)*
PL2B
7
VREF1_7/LDQ6
C (LVDS)*
GND
GNDIO7
-
GNDIO7
-
F6
PL3A
7
T
PL3A
7
LDQ6
T
F5
PL3B
7
C
PL3B
7
LDQ6
C
VCCIO
VCCIO7
7
VCCIO7
7
E4
NC
-
PL4A
7
LDQ6
T (LVDS)*
E3
NC
-
PL4B
7
LDQ6
C (LVDS)*
E2
NC
-
PL5A
7
LDQ6
T
E1
NC
-
PL5B
7
LDQ6
C
GND
GNDIO7
-
GNDIO7
-
H6
NC
-
PL6A
7
LDQS6
T (LVDS)*
H5
NC
-
PL6B
7
LDQ6
C (LVDS)*
LDQ6
T
F2
NC
-
PL7A
7
VCCIO
VCCIO7
7
VCCIO7
7
Differential
F1
NC
-
PL7B
7
LDQ6
C
H8
NC
-
PL8A
7
LDQ6
T (LVDS)*
J9
NC
-
PL8B
7
LDQ6
C (LVDS)*
G4
NC
-
PL9A
7
LDQ6
T
GND
GNDIO7
-
GNDIO7
-
G3
NC
-
PL9B
7
LDQ6
C
H7
PL4A
7
PL10A
7
LDQ14
T (LVDS)*
C (LVDS)*
LDQ8
T (LVDS)*
J8
PL4B
7
LDQ8
C (LVDS)*
PL10B
7
LDQ14
G2
PL5A
7
LDQ8
T
PL11A
7
LDQ14
T
G1
PL5B
7
LDQ8
C
PL11B
7
LDQ14
C
LDQ8
T (LVDS)*
PL12A
7
LDQ14
T (LVDS)*
VCCIO7
7
C (LVDS)*
H3
PL6A
7
VCCIO
VCCIO7
7
H4
PL6B
7
LDQ8
C (LVDS)*
PL12B
7
LDQ14
J5
PL7A
7
LDQ8
T
PL13A
7
LDQ14
T
J4
PL7B
7
LDQ8
C
PL13B
7
LDQ14
C
LDQS8
T (LVDS)*
PL14A
7
LDQS14
T (LVDS)*
GNDIO7
C (LVDS)*
J3
PL8A
7
GND
GNDIO7
-
K4
PL8B
7
LDQ8
C (LVDS)*
PL14B
7
LDQ14
H1
PL9A
7
LDQ8
T
PL15A
7
LDQ14
T
H2
PL9B
7
LDQ8
C
PL15B
7
LDQ14
C
VCCIO
VCCIO7
7
VCCIO7
7
K6
PL10A
7
LDQ8
T (LVDS)*
PL16A
7
LDQ14
T (LVDS)*
K7
PL10B
7
LDQ8
C (LVDS)*
PL16B
7
LDQ14
C (LVDS)*
J1
PL11A
7
LDQ8
T
PL17A
7
LDQ14
T
J2
PL11B
7
LDQ8
C
PL17B
7
LDQ14
C
GND
GNDIO7
-
GNDIO7
-
VCCIO
VCCIO7
7
VCCIO7
7
K3
NC
-
NC
-
K2
NC
-
NC
GND
GNDIO7
-
GNDIO7
-
K1
NC
-
NC
-
L2
NC
-
NC
-
4-73
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
L1
NC
VCCIO
M2
LFE2-35E/35SE
Ball/Pad
Function
Bank
-
NC
-
VCCIO7
7
VCCIO7
7
NC
-
NC
-
M1
NC
-
NC
-
N2
NC
-
NC
-
GND
GNDIO7
-
GNDIO7
-
M8
VCC
-
NC
-
VCCIO
VCCIO7
7
VCCIO7
7
GND
GNDIO7
-
GNDIO7
-
N1
PL12A
7
LDQ16
PL18A
7
LDQ22
L8
PL13A
7
LDQ16
T
PL19A
7
LDQ22
T
K8
PL13B
7
LDQ16
C
PL19B
7
LDQ22
C
VCCIO
VCCIO7
7
VCCIO7
7
L6
PL14A
7
LDQ16
T (LVDS)*
PL20A
7
LDQ22
T (LVDS)*
K5
PL14B
7
LDQ16
C (LVDS)*
PL20B
7
LDQ22
C (LVDS)*
L7
PL15A
7
LDQ16
T
PL21A
7
LDQ22
T
L5
PL15B
7
LDQ16
C
PL21B
7
LDQ22
C
GND
GNDIO7
-
GNDIO7
-
P1
PL16A
7
LDQS16
T (LVDS)*
PL22A
7
LDQS22
T (LVDS)*
P2
PL16B
7
LDQ16
C (LVDS)*
PL22B
7
LDQ22
C (LVDS)*
LDQ16
T
LDQ22
T
Dual Function
Differential
M6
PL17A
7
VCCIO
VCCIO7
7
N8
PL17B
7
LDQ16
R1
PL18A
7
LDQ16
R2
PL18B
7
LDQ16
C (LVDS)*
PCLKT7_0/LDQ16
T
M7
PL19A
7
GND
GNDIO7
-
Dual Function
Differential
PL23A
7
VCCIO7
7
C
PL23B
7
LDQ22
C
T (LVDS)*
PL24A
7
LDQ22
T (LVDS)*
PL24B
7
LDQ22
C (LVDS)*
PCLKT7_0/LDQ22
T
PL25A
7
GNDIO7
-
N9
PL19B
7
PCLKC7_0/LDQ16
C
PL25B
7
PCLKC7_0/LDQ22
C
M4
PL21A
6
PCLKT6_0/LDQ25
T (LVDS)*
PL27A
6
PCLKT6_0/LDQ31
T (LVDS)*
M5
PL21B
6
PCLKC6_0/LDQ25
C (LVDS)*
PL27B
6
PCLKC6_0/LDQ31
C (LVDS)*
N7
PL22A
6
VREF2_6/LDQ25
T
PL28A
6
VREF2_6/LDQ31
T
P9
PL22B
6
VREF1_6/LDQ25
C
PL28B
6
VREF1_6/LDQ31
C
N3
PL23A
6
LDQ25
T (LVDS)*
PL29A
6
LDQ31
T (LVDS)*
VCCIO
VCCIO6
6
VCCIO6
6
N4
PL23B
6
LDQ25
C (LVDS)*
PL29B
6
LDQ31
C (LVDS)*
N5
PL24A
6
LDQ25
T
PL30A
6
LDQ31
T
P7
PL24B
6
LDQ25
C
PL30B
6
LDQ31
C
LDQS31
T (LVDS)*
T1
NC
-
PL31A
6
GND
GNDIO6
-
GNDIO6
-
T2
NC
-
PL31B
6
LDQ31
C (LVDS)*
P8
NC
-
PL32A
6
LDQ31
T
LDQ31
C
P6
NC
-
PL32B
6
VCCIO
VCCIO6
6
VCCIO6
6
P5
NC
-
PL33A
6
LDQ31
T (LVDS)*
P4
NC
-
PL33B
6
LDQ31
C (LVDS)*
U1
NC
-
PL34A
6
LDQ31
T
V1
NC
-
PL34B
6
LDQ31
C
4-74
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
GND
GNDIO6
-
Dual Function
LFE2-35E/35SE
Differential
Ball/Pad
Function
Bank
GNDIO6
-
P3
NC
-
NC
-
R3
NC
-
NC
-
R4
NC
-
NC
-
U2
NC
-
NC
-
VCCIO
VCCIO6
6
VCCIO6
6
-
Dual Function
Differential
V2
NC
-
NC
W2
NC
-
NC
-
T6
NC
-
PL38A
6
LDQ39
T
LDQ39
C
R5
NC
-
PL38B
6
GND
GNDIO6
-
GNDIO6
-
R6
PL25A
6
LDQS25***
T (LVDS)*
PL39A
6
LDQS39***
T (LVDS)*
R7
PL25B
6
LDQ25
C (LVDS)*
PL39B
6
LDQ39
C (LVDS)*
LDQ25
T
LDQ39
T
W1
PL26A
6
VCCIO
VCCIO6
6
Y2
PL26B
6
LDQ25
Y1
PL27A
6
LLM0_GDLLT_IN_A**/LDQ25
AA2
PL27B
6
LLM0_GDLLC_IN_A**/LDQ25
C (LVDS)*
T5
PL28A
6
LLM0_GDLLT_FB_A/LDQ25
T
GND
GNDIO6
-
GNDIO6
-
T7
PL28B
6
R8
VCC
6
LLM0_GDLLC_FB_A/LDQ25
PL40A
6
VCCIO6
6
C
PL40B
6
LDQ39
C
T (LVDS)*
PL41A
6
LLM0_GDLLT_IN_A**/LDQ39
T (LVDS)*
PL41B
6
LLM0_GDLLC_IN_A**/LDQ39
C (LVDS)*
PL42A
6
LLM0_GDLLT_FB_A/LDQ39
T
LLM0_GDLLC_FB_A/LDQ39
C
C
PL42B
6
VCCPLL
6
T8
LLM0_PLLCAP
6
LLM0_PLLCAP
6
U3
PL30A
6
LLM0_GPLLT_IN_A**/LDQ34
T (LVDS)*
PL44A
6
LLM0_GPLLT_IN_A**/LDQ48
T (LVDS)*
U4
PL30B
6
LLM0_GPLLC_IN_A**/LDQ34
C (LVDS)*
PL44B
6
LLM0_GPLLC_IN_A**/LDQ48
C (LVDS)*
V3
PL31A
6
LLM0_GPLLT_FB_A/LDQ34
T
PL45A
6
LLM0_GPLLT_FB_A/LDQ48
T
U5
PL31B
6
LLM0_GPLLC_FB_A/LDQ34
C
PL45B
6
LLM0_GPLLC_FB_A/LDQ48
C
LDQ34
T (LVDS)*
PL46A
6
LDQ48
T (LVDS)*
VCCIO6
6
C (LVDS)*
V4
PL32A
6
VCCIO
VCCIO6
6
V5
PL32B
6
LDQ34
C (LVDS)*
PL46B
6
LDQ48
Y3
PL33A
6
LDQ34
T
PL47A
6
LDQ48
T
Y4
PL33B
6
LDQ34
C
PL47B
6
LDQ48
C
W3
PL34A
6
LDQS34
T (LVDS)*
PL48A
6
LDQS48
T (LVDS)*
GND
GNDIO6
-
GNDIO6
-
W4
PL34B
6
LDQ34
C (LVDS)*
PL48B
6
LDQ48
C (LVDS)*
AA1
PL35A
6
LDQ34
T
PL49A
6
LDQ48
T
AB1
PL35B
6
LDQ34
C
PL49B
6
LDQ48
C
VCCIO
VCCIO6
6
VCCIO6
6
U8
PL36A
6
LDQ34
T (LVDS)*
PL50A
6
LDQ48
T (LVDS)*
U7
PL36B
6
LDQ34
C (LVDS)*
PL50B
6
LDQ48
C (LVDS)*
V8
PL37A
6
LDQ34
T
PL51A
6
LDQ48
T
LDQ34
C
LDQ48
C
U6
PL37B
6
GND
GNDIO6
-
W6
PL38A
6
LDQ42
W5
PL38B
6
LDQ42
PL51B
6
GNDIO6
-
T (LVDS)*
PL52A
6
LDQ56
T (LVDS)*
C (LVDS)*
PL52B
6
LDQ56
C (LVDS)*
AC1
PL39A
6
LDQ42
T
PL53A
6
LDQ56
T
AD1
PL39B
6
LDQ42
C
PL53B
6
LDQ56
C
4-75
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO6
6
Y6
PL40A
6
LDQ42
Y5
PL40B
6
LDQ42
Dual Function
LFE2-35E/35SE
Ball/Pad
Function
Bank
VCCIO6
6
T (LVDS)*
PL54A
6
LDQ56
T (LVDS)*
C (LVDS)*
PL54B
6
LDQ56
C (LVDS)*
Differential
Dual Function
Differential
AE2
PL41A
6
LDQ42
T
PL55A
6
LDQ56
T
AD2
PL41B
6
LDQ42
C
PL55B
6
LDQ56
C
GND
GNDIO6
-
GNDIO6
-
AB3
PL42A
6
LDQS42
T (LVDS)*
PL56A
6
LDQS56
T (LVDS)*
AB2
PL42B
6
LDQ42
C (LVDS)*
PL56B
6
LDQ56
C (LVDS)*
W7
PL43A
6
LDQ42
T
PL57A
6
LDQ56
T
VCCIO
VCCIO6
6
VCCIO6
6
W8
PL43B
6
LDQ42
C
PL57B
6
LDQ56
C
Y7
PL44A
6
LDQ42
T (LVDS)*
PL58A
6
LDQ56
T (LVDS)*
Y8
PL44B
6
LDQ42
C (LVDS)*
PL58B
6
LDQ56
C (LVDS)*
AC2
PL45A
6
LDQ42
T
PL59A
6
LDQ56
T
GND
GNDIO6
-
GNDIO6
-
AD3
PL45B
6
PL59B
6
LDQ56
C
AC3
TCK
-
TCK
-
AA8
TDI
-
TDI
-
AB4
TMS
-
TMS
-
AA5
TDO
-
TDO
-
AB5
VCCJ
-
VCCJ
-
AE3
PB2A
5
VREF2_5/BDQ6
T
PB2A
5
VREF2_5/BDQ6
T
AF3
PB2B
5
VREF1_5/BDQ6
C
PB2B
5
VREF1_5/BDQ6
C
LDQ42
C
AC4
PB3A
5
BDQ6
T
PB3A
5
BDQ6
T
AD4
PB3B
5
BDQ6
C
PB3B
5
BDQ6
C
AE4
PB4A
5
BDQ6
T
PB4A
5
BDQ6
T
AF4
PB4B
5
BDQ6
C
PB4B
5
BDQ6
C
VCCIO
VCCIO5
5
VCCIO5
5
V9
PB5A
5
BDQ6
T
PB5A
5
BDQ6
T
W9
PB5B
5
BDQ6
C
PB5B
5
BDQ6
C
GND
GNDIO5
-
GNDIO5
-
AA6
PB6A
5
BDQS6
T
PB6A
5
BDQS6
T
AB6
PB6B
5
BDQ6
C
PB6B
5
BDQ6
C
AC5
PB7A
5
BDQ6
T
PB7A
5
BDQ6
T
AD5
PB7B
5
BDQ6
C
PB7B
5
BDQ6
C
AA7
PB8A
5
BDQ6
T
PB8A
5
BDQ6
T
AB7
PB8B
5
BDQ6
C
PB8B
5
BDQ6
C
VCCIO
VCCIO5
5
VCCIO5
5
AE5
PB9A
5
BDQ6
T
PB9A
5
BDQ6
T
AF5
PB9B
5
BDQ6
C
PB9B
5
BDQ6
C
AC7
PB10A
5
BDQ6
T
PB10A
5
BDQ6
T
BDQ6
C
PB10B
5
BDQ6
C
VCCIO5
5
AD7
PB10B
5
VCCIO
VCCIO5
5
GND
GNDIO5
-
GNDIO5
-
W10
PB11A
5
BDQ15
T
PB11A
5
BDQ15
T
Y10
PB11B
5
BDQ15
C
PB11B
5
BDQ15
C
W11
PB12A
5
BDQ15
T
PB12A
5
BDQ15
T
4-76
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
AA10
PB12B
5
BDQ15
LFE2-35E/35SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
C
PB12B
5
BDQ15
C
AC8
PB13A
5
BDQ15
T
PB13A
5
BDQ15
T
AD8
PB13B
5
BDQ15
C
PB13B
5
BDQ15
C
VCCIO
VCCIO5
5
VCCIO5
5
AB8
PB14A
5
BDQ15
T
PB14A
5
BDQ15
T
AB10
PB14B
5
BDQ15
C
PB14B
5
BDQ15
C
GND
GNDIO5
-
GNDIO5
-
AE6
PB15A
5
BDQS15
T
PB15A
5
BDQS15
T
AF6
PB15B
5
BDQ15
C
PB15B
5
BDQ15
C
AA11
PB16A
5
BDQ15
T
PB16A
5
BDQ15
T
AC9
PB16B
5
BDQ15
C
PB16B
5
BDQ15
C
AB9
PB17A
5
BDQ15
T
PB17A
5
BDQ15
T
AD9
PB17B
5
BDQ15
C
PB17B
5
BDQ15
C
VCCIO
VCCIO5
5
VCCIO5
5
Y11
PB18A
5
BDQ15
T
PB18A
5
BDQ15
T
AB11
PB18B
5
BDQ15
C
PB18B
5
BDQ15
C
AE7
PB19A
5
BDQ15
T
PB19A
5
BDQ15
T
AF7
PB19B
5
BDQ15
C
PB19B
5
BDQ15
C
GND
GNDIO5
-
GNDIO5
-
AC10
PB20A
5
BDQ24
T
PB20A
5
BDQ24
T
AD10
PB20B
5
BDQ24
C
PB20B
5
BDQ24
C
AA12
PB21A
5
BDQ24
T
PB21A
5
BDQ24
T
W12
PB21B
5
BDQ24
C
PB21B
5
BDQ24
C
BDQ24
T
BDQ24
T
C
AB12
PB22A
5
VCCIO
VCCIO5
5
PB22A
5
VCCIO5
5
Y12
PB22B
5
BDQ24
C
PB22B
5
BDQ24
AD12
PB23A
5
BDQ24
T
PB23A
5
BDQ24
T
AC12
PB23B
5
BDQ24
C
PB23B
5
BDQ24
C
AC13
PB24A
5
BDQS24
T
BDQS24
T
GND
GNDIO5
-
C
PB24A
5
GNDIO5
-
AA13
PB24B
5
BDQ24
C
PB24B
5
BDQ24
AD13
PB25A
5
BDQ24
T
PB25A
5
BDQ24
T
AC14
PB25B
5
BDQ24
C
PB25B
5
BDQ24
C
BDQ24
T
BDQ24
T
C
AE8
PB26A
5
VCCIO
VCCIO5
5
PB26A
5
VCCIO5
5
AF8
PB26B
5
BDQ24
C
PB26B
5
BDQ24
AB15
PB27A
5
BDQ24
T
PB27A
5
BDQ24
T
Y13
PB27B
5
BDQ24
C
PB27B
5
BDQ24
C
BDQ24
T
BDQ24
T
C
AE9
PB28A
5
GND
GNDIO5
-
AF9
PB28B
5
BDQ24
PB28A
5
GNDIO5
-
C
PB28B
5
BDQ24
W13
PB29A
5
BDQ33
T
PB29A
5
BDQ33
T
AA14
PB29B
5
BDQ33
C
PB29B
5
BDQ33
C
AE10
PB30A
5
BDQ33
T
PB30A
5
BDQ33
T
AF10
PB30B
5
BDQ33
C
PB30B
5
BDQ33
C
W14
PB31A
5
BDQ33
T
PB31A
5
BDQ33
T
AB13
PB31B
5
BDQ33
C
PB31B
5
BDQ33
C
4-77
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO5
5
Dual Function
LFE2-35E/35SE
Differential
Ball/Pad
Function
Bank
VCCIO5
5
Dual Function
Differential
Y14
PB32A
5
BDQ33
T
PB32A
5
BDQ33
T
AB14
PB32B
5
BDQ33
C
PB32B
5
BDQ33
C
GND
GNDIO5
-
GNDIO5
-
AE11
PB33A
5
BDQS33
T
PB33A
5
BDQS33
T
AF11
PB33B
5
BDQ33
C
PB33B
5
BDQ33
C
AD14
PB34A
5
BDQ33
T
PB34A
5
BDQ33
T
AA15
PB34B
5
BDQ33
C
PB34B
5
BDQ33
C
AE12
PB35A
5
PCLKT5_0/BDQ33
T
PB35A
5
PCLKT5_0/BDQ33
T
PCLKC5_0/BDQ33
C
PB35B
5
PCLKC5_0/BDQ33
C
VCCIO5
5
PCLKT4_0/BDQ42
T
C
AF12
PB35B
5
VCCIO
VCCIO5
5
GND
GNDIO5
-
AD15
PB40A
4
VCCIO
VCCIO4
4
AC15
PB40B
4
PCLKC4_0/BDQ42
C
PB40B
4
PCLKC4_0/BDQ42
AE13
PB41A
4
BDQ42
T
PB41A
4
BDQ42
T
AF13
PB41B
4
BDQ42
C
PB41B
4
BDQ42
C
AB17
PB42A
4
BDQS42
T
BDQS42
T
GND
GNDIO4
-
C
PCLKT4_0/BDQ42
T
GNDIO5
-
PB40A
4
VCCIO4
4
PB42A
4
GNDIO4
-
Y15
PB42B
4
BDQ42
C
PB42B
4
BDQ42
AE14
PB43A
4
BDQ42
T
PB43A
4
BDQ42
T
AF14
PB43B
4
BDQ42
C
PB43B
4
BDQ42
C
BDQ42
T
BDQ42
T
BDQ42
C
AA16
PB44A
4
VCCIO
VCCIO4
4
W15
PB44B
4
BDQ42
AC17
PB45A
4
BDQ42
T
PB45A
4
BDQ42
T
AB16
PB45B
4
BDQ42
C
PB45B
4
BDQ42
C
AE15
PB46A
4
BDQ42
T
BDQ42
T
GND
GNDIO4
-
C
C
PB44A
4
VCCIO4
4
PB44B
4
PB46A
4
GNDIO4
-
AF15
PB46B
4
BDQ42
C
PB46B
4
BDQ42
AE16
PB47A
4
BDQ51
T
PB47A
4
BDQ51
T
AF16
PB47B
4
BDQ51
C
PB47B
4
BDQ51
C
Y16
PB48A
4
BDQ51
T
PB48A
4
BDQ51
T
C
AB18
PB48B
4
BDQ51
C
PB48B
4
BDQ51
AD17
PB49A
4
BDQ51
T
PB49A
4
BDQ51
T
AD18
PB49B
4
BDQ51
C
PB49B
4
BDQ51
C
VCCIO
VCCIO4
4
VCCIO4
4
AC18
PB50A
4
BDQ51
T
PB50A
4
BDQ51
T
AD19
PB50B
4
BDQ51
C
PB50B
4
BDQ51
C
GND
GNDIO4
-
GNDIO4
-
AC19
PB51A
4
BDQS51
T
PB51A
4
BDQS51
T
AE17
PB51B
4
BDQ51
C
PB51B
4
BDQ51
C
AB19
PB52A
4
BDQ51
T
PB52A
4
BDQ51
T
AE19
PB52B
4
BDQ51
C
PB52B
4
BDQ51
C
AF17
PB53A
4
BDQ51
T
PB53A
4
BDQ51
T
AE18
PB53B
4
BDQ51
C
PB53B
4
BDQ51
C
VCCIO
VCCIO4
4
VCCIO4
4
4-78
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
W16
PB54A
4
BDQ51
AA17
PB54B
4
AF18
PB55A
4
AF19
PB55B
4
LFE2-35E/35SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
T
PB54A
4
BDQ51
T
BDQ51
C
PB54B
4
BDQ51
C
BDQ51
T
PB55A
4
BDQ51
T
BDQ51
C
PB55B
4
BDQ51
C
GND
GNDIO4
-
GNDIO4
-
AA19
NC
-
PB56A
4
BDQ60
T
W17
NC
-
PB56B
4
BDQ60
C
Y19
NC
-
PB57A
4
BDQ60
T
Y17
NC
-
PB57B
4
BDQ60
C
AF20
NC
-
NC
-
VCCIO
VCCIO4
4
VCCIO4
4
AE20
NC
-
NC
-
AA20
NC
-
NC
-
W18
NC
-
NC
-
AD20
NC
-
NC
-
GND
GNDIO4
-
GNDIO4
-
AE21
NC
-
NC
-
AF21
NC
-
NC
-
AF22
NC
-
NC
-
VCCIO
VCCIO4
4
VCCIO4
4
GND
GNDIO4
-
GNDIO4
-
AE22
PB56A
4
BDQ60
T
PB65A
4
BDQ69
T
AD22
PB56B
4
BDQ60
C
PB65B
4
BDQ69
C
AF23
PB57A
4
BDQ60
T
PB66A
4
BDQ69
T
AE23
PB57B
4
BDQ60
C
PB66B
4
BDQ69
C
AD23
PB58A
4
BDQ60
T
PB67A
4
BDQ69
T
AC23
PB58B
4
BDQ60
C
PB67B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
AB20
PB59A
4
BDQ60
T
PB68A
4
BDQ69
T
AC20
PB59B
4
BDQ60
C
PB68B
4
BDQ69
C
GND
GNDIO4
-
GNDIO4
-
AB21
PB60A
4
BDQS60
T
PB69A
4
BDQS69
T
AC22
PB60B
4
BDQ60
C
PB69B
4
BDQ69
C
W19
PB61A
4
BDQ60
T
PB70A
4
BDQ69
T
AA21
PB61B
4
BDQ60
C
PB70B
4
BDQ69
C
AF24
PB62A
4
BDQ60
T
PB71A
4
BDQ69
T
AE24
PB62B
4
BDQ60
C
PB71B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
Y20
PB63A
4
BDQ60
T
PB72A
4
BDQ69
T
AB22
PB63B
4
BDQ60
C
PB72B
4
BDQ69
C
Y21
PB64A
4
VREF2_4/BDQ60
T
PB73A
4
VREF2_4/BDQ69
T
AB23
PB64B
4
VREF1_4/BDQ60
C
PB73B
4
VREF1_4/BDQ69
C
GND
GNDIO4
-
GNDIO4
-
AD24
CFG2
8
CFG2
8
W20
CFG1
8
CFG1
8
AC24
CFG0
8
CFG0
8
V19
PROGRAMN
8
PROGRAMN
8
4-79
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
AA22
CCLK
8
LFE2-35E/35SE
Dual Function
Differential
Ball/Pad
Function
Bank
CCLK
8
Dual Function
Differential
C
AB24
INITN
8
INITN
8
AD25
DONE
8
DONE
8
GND
GNDIO8
-
GNDIO8
-
W21
PR44B
8
WRITEN
C
PR58B
8
WRITEN
Y22
PR44A
8
CS1N
T
PR58A
8
CS1N
T
AC25
PR43B
8
CSN
C
PR57B
8
CSN
C
AB25
PR43A
8
D0/SPIFASTN
T
PR57A
8
D0/SPIFASTN
T
VCCIO
VCCIO8
8
VCCIO8
8
C
AD26
PR42B
8
D1
C
PR56B
8
D1
AC26
PR42A
8
D2
T
PR56A
8
D2
T
Y23
PR41B
8
D3
C
PR55B
8
D3
C
GND
GNDIO8
-
GNDIO8
-
W22
PR41A
8
D4
T
PR55A
8
D4
T
AA25
PR40B
8
D5
C
PR54B
8
D5
C
AB26
PR40A
8
D6
T
PR54A
8
D6
T
W23
PR39B
8
D7
C
PR53B
8
D7
C
VCCIO
VCCIO8
8
VCCIO8
8
V22
PR39A
8
DI/CSSPI0N
T
PR53A
8
DI/CSSPI0N
T
Y24
PR38B
8
DOUT/CSON
C
PR52B
8
DOUT/CSON
C
Y25
PR38A
8
BUSY/SISPI
T
PR52A
8
BUSY/SISPI
T
W24
PR37B
3
RDQ34
C
PR51B
3
RDQ48
C
GND
GNDIO3
-
GNDIO3
-
V23
PR37A
3
RDQ34
T
PR51A
3
RDQ48
T
AA26
PR36B
3
RDQ34
C (LVDS)*
PR50B
3
RDQ48
C (LVDS)*
Y26
PR36A
3
RDQ34
T (LVDS)*
PR50A
3
RDQ48
T (LVDS)*
U21
PR35B
3
RDQ34
C
PR49B
3
RDQ48
C
VCCIO
VCCIO3
3
VCCIO3
3
U19
PR35A
3
RDQ34
T
PR49A
3
RDQ48
T
W25
PR34B
3
RDQ34
C (LVDS)*
PR48B
3
RDQ48
C (LVDS)*
RDQS34
T (LVDS)*
RDQS48
T (LVDS)*
C
W26
PR34A
3
GND
GNDIO3
-
PR48A
3
GNDIO3
-
V24
PR33B
3
RDQ34
C
PR47B
3
RDQ48
V25
PR33A
3
V26
PR32B
3
RDQ34
T
PR47A
3
RDQ48
T
RDQ34
C (LVDS)*
PR46B
3
RDQ48
C (LVDS)*
RDQ34
T (LVDS)*
RDQ48
T (LVDS)*
C
U26
PR32A
3
VCCIO
VCCIO3
3
PR46A
3
VCCIO3
3
U22
PR31B
3
RLM0_GPLLC_FB_A/RDQ34
U23
PR31A
3
RLM0_GPLLT_FB_A/RDQ34
C
PR45B
3
RLM0_GPLLC_FB_A/RDQ48
T
PR45A
3
RLM0_GPLLT_FB_A/RDQ48
U24
PR30B
3
T
RLM0_GPLLC_IN_A**/RDQ34
C (LVDS)*
PR44B
3
RLM0_GPLLC_IN_A**/RDQ48
C (LVDS)*
U25
PR30A
3
RLM0_GPLLT_IN_A**/RDQ34
T (LVDS)*
PR44A
3
RLM0_GPLLT_IN_A**/RDQ48
T (LVDS)*
R20
RLM0_PLLCAP
3
RLM0_PLLCAP
3
P18
VCC
3
VCCPLL
3
T19
PR28B
3
RLM0_GDLLC_FB_A/RDQ25
C
PR42B
3
RLM0_GDLLC_FB_A/RDQ39
C
U20
PR28A
3
RLM0_GDLLT_FB_A/RDQ25
T
PR42A
3
RLM0_GDLLT_FB_A/RDQ39
T
GND
GNDIO3
-
GNDIO3
-
T25
PR27B
3
PR41B
3
RLM0_GDLLC_IN_A**/RDQ39
C (LVDS)*
RLM0_GDLLC_IN_A**/RDQ25
C (LVDS)*
4-80
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
T26
PR27A
3
RLM0_GDLLT_IN_A**/RDQ25
T20
PR26B
3
T22
PR26A
3
VCCIO
VCCIO3
3
R26
PR25B
3
RDQ25
R25
PR25A
3
RDQS25***
R22
NC
GND
LFE2-35E/35SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
T (LVDS)*
PR41A
3
RLM0_GDLLT_IN_A**/RDQ39
T (LVDS)*
RDQ25
C
PR40B
3
RDQ39
C
RDQ25
T
PR40A
3
RDQ39
T
VCCIO3
3
C (LVDS)*
PR39B
3
RDQ39
C (LVDS)*
T (LVDS)*
PR39A
3
RDQS39***
T (LVDS)*
-
PR38B
3
RDQ39
C
GNDIO3
-
GNDIO3
-
T21
NC
-
PR38A
3
RDQ39
T
P26
NC
-
NC
-
P25
NC
-
NC
-
R24
NC
-
NC
-
VCCIO
VCCIO3
3
VCCIO3
3
R23
NC
-
NC
-
P20
NC
-
NC
-
R19
NC
-
NC
-
P21
NC
-
PR34B
3
RDQ31
C
GND
GNDIO3
-
GNDIO3
-
P19
NC
-
PR34A
3
RDQ31
T
P23
NC
-
PR33B
3
RDQ31
C (LVDS)*
P22
NC
-
PR33A
3
RDQ31
T (LVDS)*
N22
NC
-
PR32B
3
RDQ31
C
VCCIO
VCCIO3
3
VCCIO3
3
R21
NC
-
PR32A
3
RDQ31
T
N26
NC
-
PR31B
3
RDQ31
C (LVDS)*
RDQS31
T (LVDS)*
C
N25
NC
-
PR31A
3
GND
GNDIO3
-
GNDIO3
-
N19
PR24B
3
RDQ25
C
PR30B
3
RDQ31
N20
PR24A
3
RDQ25
T
PR30A
3
RDQ31
T
M26
PR23B
3
RDQ25
C (LVDS)*
PR29B
3
RDQ31
C (LVDS)*
RDQ25
T (LVDS)*
RDQ31
T (LVDS)*
VREF2_3/RDQ31
C
M25
PR23A
3
VCCIO
VCCIO3
3
N18
PR22B
3
N21
PR22A
3
L26
PR21B
3
PR29A
3
VCCIO3
3
C
PR28B
3
VREF1_3/RDQ25
T
PR28A
3
VREF1_3/RDQ31
T
PCLKC3_0/RDQ25
C (LVDS)*
PR27B
3
PCLKC3_0/RDQ31
C (LVDS)*
VREF2_3/RDQ25
L25
PR21A
3
PCLKT3_0/RDQ25
T (LVDS)*
PR27A
3
PCLKT3_0/RDQ31
T (LVDS)*
N24
PR19B
2
PCLKC2_0/RDQ16
C
PR25B
2
PCLKC2_0/RDQ22
C
M23
PR19A
2
PCLKT2_0/RDQ16
T
PR25A
2
PCLKT2_0/RDQ22
T
GND
GNDIO2
-
GNDIO2
-
L21
PR18B
2
RDQ16
C (LVDS)*
PR24B
2
RDQ22
C (LVDS)*
K22
PR18A
2
RDQ16
T (LVDS)*
PR24A
2
RDQ22
T (LVDS)*
M24
PR17B
2
RDQ16
C
PR23B
2
RDQ22
C
N23
PR17A
2
RDQ16
T
PR23A
2
RDQ22
T
VCCIO
VCCIO2
2
VCCIO2
2
K26
PR16B
2
RDQ16
C (LVDS)*
PR22B
2
RDQ22
C (LVDS)*
K25
PR16A
2
RDQS16
T (LVDS)*
PR22A
2
RDQS22
T (LVDS)*
M20
PR15B
2
RDQ16
C
PR21B
2
RDQ22
C
4-81
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
LFE2-35E/35SE
Ball
Number
Ball/Pad
Function
Bank
GND
GNDIO2
-
M19
PR15A
2
RDQ16
L22
PR14B
2
RDQ16
M22
PR14A
2
RDQ16
T (LVDS)*
PR20A
K21
PR13B
2
RDQ16
C
PR19B
VCCIO
VCCIO2
2
VCCIO2
2
M21
PR13A
2
RDQ16
T
PR19A
2
RDQ22
T
K24
PR12B
2
RDQ16
C (LVDS)*
PR18B
2
RDQ22
C (LVDS)*
J24
PR12A
2
RDQ16
T (LVDS)*
PR18A
2
RDQ22
T (LVDS)*
GND
GNDIO2
-
GNDIO2
-
VCCIO
VCCIO2
2
VCCIO2
2
-
RDQ14
C
Dual Function
Ball/Pad
Function
Bank
GNDIO2
-
T
PR21A
2
RDQ22
T
C (LVDS)*
PR20B
2
RDQ22
C (LVDS)*
2
RDQ22
T (LVDS)*
2
RDQ22
C
Differential
L20
VCC
-
NC
GND
GNDIO2
-
GNDIO2
-
J26
NC
-
NC
-
J25
NC
-
NC
-
J23
NC
-
NC
-
K23
NC
-
NC
-
VCCIO
VCCIO2
2
VCCIO2
2
H26
NC
-
NC
-
H25
NC
-
NC
-
H24
NC
-
NC
-
GND
GNDIO2
-
GNDIO2
-
H23
NC
-
NC
-
VCCIO
VCCIO2
2
G26
PR11B
2
GND
GNDIO2
-
G25
PR11A
F26
PR10B
VCCIO2
2
PR17B
2
Dual Function
Differential
RDQ8
C
GNDIO2
-
2
RDQ8
T
PR17A
2
RDQ14
T
2
RDQ8
C (LVDS)*
PR16B
2
RDQ14
C (LVDS)*
F25
PR10A
2
RDQ8
T (LVDS)*
PR16A
2
RDQ14
T (LVDS)*
K20
PR9B
2
RDQ8
C
PR15B
2
RDQ14
C
VCCIO
VCCIO2
2
VCCIO2
2
L19
PR9A
2
RDQ8
T
PR15A
2
RDQ14
T
E26
PR8B
2
RDQ8
C (LVDS)*
PR14B
2
RDQ14
C (LVDS)*
RDQS8
T (LVDS)*
PR14A
2
RDQS14
T (LVDS)*
GNDIO2
C
E25
PR8A
2
GND
GNDIO2
-
J22
PR7B
2
RDQ8
C
PR13B
2
RDQ14
H22
PR7A
2
RDQ8
T
PR13A
2
RDQ14
T
G24
PR6B
2
RDQ8
C (LVDS)*
PR12B
2
RDQ14
C (LVDS)*
RDQ8
T (LVDS)*
RDQ14
T (LVDS)*
C
G23
PR6A
2
VCCIO
VCCIO2
2
K19
PR5B
2
RDQ8
PR12A
2
VCCIO2
2
C
PR11B
2
RDQ14
J19
PR5A
2
RDQ8
T
PR11A
2
RDQ14
T
D26
PR4B
2
RDQ8
C (LVDS)*
PR10B
2
RDQ14
C (LVDS)*
C26
PR4A
2
RDQ8
T (LVDS)*
PR10A
2
RDQ14
T (LVDS)*
F22
NC
-
PR9B
2
RDQ6
C
E24
NC
-
PR9A
2
RDQ6
T
GND
GNDIO2
-
GNDIO2
-
4-82
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
D25
NC
C25
D24
LFE2-35E/35SE
Ball/Pad
Function
Bank
Dual Function
Differential
-
PR8B
2
RDQ6
C (LVDS)*
NC
-
PR8A
2
RDQ6
T (LVDS)*
NC
-
PR7B
2
RDQ6
C
B25
NC
-
PR7A
2
RDQ6
T
VCCIO
VCCIO2
2
VCCIO2
2
Dual Function
Differential
H21
NC
-
PR6B
2
RDQ6
C (LVDS)*
G22
NC
-
PR6A
2
RDQS6
T (LVDS)*
B24
NC
-
PR5B
2
RDQ6
C
GND
GNDIO2
-
GNDIO2
-
C24
NC
-
PR5A
2
RDQ6
T
D23
NC
-
PR4B
2
RDQ6
C (LVDS)*
PR4A
2
RDQ6
T (LVDS)*
PR3B
2
RDQ6
C
VCCIO2
2
RDQ6
T
C23
NC
-
G21
PR3B
2
VCCIO
VCCIO2
2
C
H20
PR3A
2
GND
GNDIO2
-
T
E22
PR2B
2
VREF2_2
C (LVDS)*
PR3A
2
GNDIO2
-
PR2B
2
VREF2_2/RDQ6
C (LVDS)*
F21
PR2A
2
VREF1_2
T (LVDS)*
PR2A
2
VREF1_2/RDQ6
T (LVDS)*
E23
PT64B
1
VREF2_1
C
PT73B
1
VREF2_1
C
GND
GNDIO1
-
GNDIO1
-
D22
PT64A
1
G20
PT63B
1
VREF1_1
T
PT73A
1
C
PT72B
1
VREF1_1
T
C
J18
PT63A
1
T
PT72A
1
T
F20
PT62B
1
C
PT71B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
H19
PT62A
1
T
PT71A
1
T
A24
PT61B
1
C
PT70B
1
C
A23
PT61A
1
T
PT70A
1
T
E21
PT60B
1
C
PT69B
1
C
F19
PT60A
1
T
PT69A
1
T
C22
PT59B
1
C
PT68B
1
C
GND
GNDIO1
-
E20
PT59A
1
T
B22
PT58B
1
C
VCCIO
VCCIO1
1
GNDIO1
-
PT68A
1
T
PT67B
1
C
VCCIO1
1
B23
PT58A
1
T
PT67A
1
T
C20
PT57B
1
C
PT66B
1
C
D20
PT57A
1
T
PT66A
1
T
A22
PT56B
1
C
PT65B
1
C
T
T
A21
PT56A
1
PT65A
1
GND
GNDIO1
-
GNDIO1
-
E19
NC
-
NC
C19
NC
-
NC
-
VCCIO
VCCIO1
1
VCCIO1
1
B21
NC
-
NC
-
B20
NC
-
NC
-
D19
NC
-
NC
-
4-83
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
B19
NC
GND
G17
LFE2-35E/35SE
Ball/Pad
Function
Bank
-
NC
-
GNDIO1
-
GNDIO1
-
NC
-
NC
-
Dual Function
Differential
E18
NC
-
NC
G19
NC
-
NC
-
F17
NC
-
NC
-
VCCIO
VCCIO1
1
VCCIO1
1
A20
NC
-
NC
-
A19
NC
-
NC
-
Dual Function
Differential
E17
NC
-
NC
D18
NC
-
NC
-
B18
PT55B
1
PT55B
1
GND
GNDIO1
-
GNDIO1
-
A18
PT55A
1
T
PT55A
1
T
E16
PT54B
1
C
PT54B
1
C
C
C
G16
PT54A
1
T
PT54A
1
T
F16
PT53B
1
C
PT53B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
H18
PT53A
1
T
PT53A
1
T
A17
PT52B
1
C
PT52B
1
C
B17
PT52A
1
T
PT52A
1
T
C18
PT51B
1
C
PT51B
1
C
B16
PT51A
1
T
PT51A
1
T
C17
PT50B
1
C
PT50B
1
C
GND
GNDIO1
-
GNDIO1
-
D17
PT50A
1
T
PT50A
1
T
E15
PT49B
1
C
PT49B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
G15
PT49A
1
T
PT49A
1
T
A16
PT48B
1
C
PT48B
1
C
B15
PT48A
1
T
PT48A
1
T
D15
PT47B
1
C
PT47B
1
C
F15
PT47A
1
T
PT47A
1
T
A14
PT46B
1
C
PT46B
1
C
B14
PT46A
1
T
PT46A
1
T
GND
GNDIO1
-
GNDIO1
-
C15
PT45B
1
C
PT45B
1
A15
PT45A
1
T
PT45A
1
T
A13
PT44B
1
C
PT44B
1
C
T
T
B13
PT44A
1
VCCIO
VCCIO1
1
H17
PT43B
1
H15
PT43A
1
D13
PT42B
C
PT44A
1
VCCIO1
1
C
PT43B
1
T
PT43A
1
T
1
C
PT42B
1
C
T
T
C14
PT42A
1
GND
GNDIO1
-
G14
PT41B
1
C
4-84
PT42A
1
GNDIO1
-
PT41B
1
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
E14
PT41A
1
A12
PT40B
B12
PT40A
VCCIO
VCCIO1
1
LFE2-35E/35SE
Differential
Ball/Pad
Function
Bank
T
PT41A
1
T
1
C
PT40B
1
C
1
T
PT40A
1
T
VCCIO1
1
Dual Function
Dual Function
Differential
F14
PT39B
1
PCLKC1_0
C
PT39B
1
PCLKC1_0
C
D14
PT39A
1
PCLKT1_0
T
PT39A
1
PCLKT1_0
T
H16
XRES
1
XRES
1
PCLKC0_0
C
H14
PT37B
0
GND
GNDIO0
-
H13
PT37A
0
A11
PT36B
0
PCLKC0_0
PCLKT0_0
C
PT37B
0
GNDIO0
-
T
PT37A
0
C
PT36B
0
PCLKT0_0
T
C
B11
PT36A
0
T
PT36A
0
T
C13
PT35B
0
C
PT35B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
E13
PT35A
0
T
PT35A
0
T
D12
PT34B
0
C
PT34B
0
C
F13
PT34A
0
T
PT34A
0
T
A10
PT33B
0
C
PT33B
0
C
B10
PT33A
0
T
PT33A
0
T
C12
PT32B
0
C
PT32B
0
C
GND
GNDIO0
-
GNDIO0
-
C10
PT32A
0
T
PT32A
0
T
G13
PT31B
0
C
PT31B
0
C
VCCIO
VCCIO0
0
H12
PT31A
0
T
A9
PT30B
0
B9
PT30A
0
E12
PT29B
0
G12
PT29A
A8
PT28B
VCCIO0
0
PT31A
0
T
C
PT30B
0
C
T
PT30A
0
T
C
PT29B
0
C
0
T
PT29A
0
T
0
C
PT28B
0
C
T
T
B8
PT28A
0
GND
GNDIO0
-
PT28A
0
GNDIO0
-
E11
PT27B
0
C
PT27B
0
C9
PT27A
A7
PT26B
0
T
PT27A
0
T
0
C
PT26B
0
C
T
T
B7
PT26A
0
VCCIO
VCCIO0
0
PT26A
0
VCCIO0
0
C
F12
PT25B
0
C
PT25B
0
D10
PT25A
0
T
PT25A
0
T
H11
PT24B
0
C
PT24B
0
C
G11
PT24A
0
T
PT24A
0
T
GND
GNDIO0
-
GNDIO0
-
A6
PT23B
0
C
PT23B
0
B6
PT23A
0
T
PT23A
0
T
D8
PT22B
0
C
PT22B
0
C
C8
PT22A
0
T
PT22A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
4-85
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
F11
PT21B
0
Dual Function
LFE2-35E/35SE
Differential
Ball/Pad
Function
Bank
C
PT21B
0
Dual Function
Differential
C
E10
PT21A
0
T
PT21A
0
T
E9
PT20B
0
C
PT20B
0
C
D9
PT20A
0
T
PT20A
0
T
G10
PT19B
0
C
PT19B
0
C
GND
GNDIO0
-
GNDIO0
-
H10
PT19A
0
T
PT19A
0
T
A5
PT18B
0
C
PT18B
0
C
B5
PT18A
0
T
PT18A
0
T
C
C
C7
PT17B
0
VCCIO
VCCIO0
0
D7
PT17A
0
E8
PT16B
0
PT17B
0
VCCIO0
0
T
PT17A
0
T
C
PT16B
0
C
F10
PT16A
0
T
PT16A
0
T
F8
PT15B
0
C
PT15B
0
C
H9
PT15A
0
T
PT15A
0
T
C5
PT14B
0
C
PT14B
0
C
GND
GNDIO0
-
D5
PT14A
0
B4
PT13B
0
VCCIO
VCCIO0
GND
GNDIO0
VCCIO
VCCIO0
GND
VCCIO
GNDIO0
-
PT14A
0
PT13B
0
0
VCCIO0
0
-
GNDIO0
-
0
VCCIO0
0
GNDIO0
-
GNDIO0
-
VCCIO0
0
VCCIO0
0
T
C4
PT10B
0
GND
GNDIO0
-
C
C3
PT10A
0
A4
PT9B
0
A3
PT9A
0
B3
PT8B
0
VCCIO
VCCIO0
0
B2
PT8A
0
T
D4
PT7B
0
C
D3
PT7A
0
T
C2
PT6B
0
C
T
PT10B
0
GNDIO0
-
C
T
PT10A
0
T
C
PT9B
0
C
T
PT9A
0
T
C
PT8B
0
C
VCCIO0
0
PT8A
0
T
PT7B
0
C
PT7A
0
T
PT6B
0
C
C1
PT6A
0
T
PT6A
0
T
G8
PT5B
0
C
PT5B
0
C
GND
GNDIO0
-
GNDIO0
-
G7
PT5A
0
T
PT5A
0
T
E7
PT4B
0
C
PT4B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
F7
PT4A
0
T
PT4A
0
T
E6
PT3B
0
C
PT3B
0
C
E5
PT3A
0
T
PT3A
0
G6
PT2B
0
VREF2_0
C
PT2B
0
VREF2_0
C
G5
PT2A
0
VREF1_0
T
PT2A
0
VREF1_0
T
4-86
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
L12
VCC
L13
L14
LFE2-35E/35SE
Ball/Pad
Function
Bank
-
VCC
-
VCC
-
VCC
-
VCC
-
VCC
-
L15
VCC
-
VCC
-
M11
VCC
-
VCC
-
M12
VCC
-
VCC
-
M15
VCC
-
VCC
-
M16
VCC
-
VCC
-
N11
VCC
-
VCC
-
N16
VCC
-
VCC
-
P11
VCC
-
VCC
-
P16
VCC
-
VCC
-
R11
VCC
-
VCC
-
R12
VCC
-
VCC
-
R15
VCC
-
VCC
-
R16
VCC
-
VCC
-
T12
VCC
-
VCC
-
T13
VCC
-
VCC
-
T14
VCC
-
VCC
-
T15
VCC
-
VCC
-
D11
VCCIO0
0
VCCIO0
0
Dual Function
Differential
D6
VCCIO0
0
VCCIO0
0
G9
VCCIO0
0
VCCIO0
0
K12
VCCIO0
0
VCCIO0
0
J12
VCCIO0
0
VCCIO0
0
D16
VCCIO1
1
VCCIO1
1
D21
VCCIO1
1
VCCIO1
1
G18
VCCIO1
1
VCCIO1
1
J15
VCCIO1
1
VCCIO1
1
K15
VCCIO1
1
VCCIO1
1
F23
VCCIO2
2
VCCIO2
2
J20
VCCIO2
2
VCCIO2
2
L23
VCCIO2
2
VCCIO2
2
M17
VCCIO2
2
VCCIO2
2
M18
VCCIO2
2
VCCIO2
2
AA23
VCCIO3
3
VCCIO3
3
R17
VCCIO3
3
VCCIO3
3
R18
VCCIO3
3
VCCIO3
3
T23
VCCIO3
3
VCCIO3
3
V20
VCCIO3
3
VCCIO3
3
AC16
VCCIO4
4
VCCIO4
4
AC21
VCCIO4
4
VCCIO4
4
U15
VCCIO4
4
VCCIO4
4
V15
VCCIO4
4
VCCIO4
4
Y18
VCCIO4
4
VCCIO4
4
AC11
VCCIO5
5
VCCIO5
5
AC6
VCCIO5
5
VCCIO5
5
4-87
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
U12
VCCIO5
V12
Y9
AA4
LFE2-35E/35SE
Ball/Pad
Function
Bank
5
VCCIO5
5
VCCIO5
5
VCCIO5
5
VCCIO5
5
VCCIO5
5
VCCIO6
6
VCCIO6
6
R10
VCCIO6
6
VCCIO6
6
R9
VCCIO6
6
VCCIO6
6
6
Dual Function
Differential
T4
VCCIO6
6
VCCIO6
V7
VCCIO6
6
VCCIO6
6
F4
VCCIO7
7
VCCIO7
7
J7
VCCIO7
7
VCCIO7
7
L4
VCCIO7
7
VCCIO7
7
M10
VCCIO7
7
VCCIO7
7
M9
VCCIO7
7
VCCIO7
7
AE25
VCCIO8
8
VCCIO8
8
V18
VCCIO8
8
VCCIO8
8
J10
VCCAUX
-
VCCAUX
-
J11
VCCAUX
-
VCCAUX
-
J16
VCCAUX
-
VCCAUX
-
J17
VCCAUX
-
VCCAUX
-
K18
VCCAUX
-
VCCAUX
-
K9
VCCAUX
-
VCCAUX
-
L18
VCCAUX
-
VCCAUX
-
L9
VCCAUX
-
VCCAUX
-
T18
VCCAUX
-
VCCAUX
-
T9
VCCAUX
-
VCCAUX
-
U18
VCCAUX
-
VCCAUX
-
U9
VCCAUX
-
VCCAUX
-
V10
VCCAUX
-
VCCAUX
-
V11
VCCAUX
-
VCCAUX
-
V16
VCCAUX
-
VCCAUX
-
V17
VCCAUX
-
VCCAUX
-
A2
GND
-
GND
-
A25
GND
-
GND
-
AA18
GND
-
GND
-
AA24
GND
-
GND
-
AA3
GND
-
GND
-
AA9
GND
-
GND
-
AD11
GND
-
GND
-
AD16
GND
-
GND
-
AD21
GND
-
GND
-
AD6
GND
-
GND
-
AE1
GND
-
GND
-
AE26
GND
-
GND
-
AF2
GND
-
GND
-
AF25
GND
-
GND
-
B1
GND
-
GND
-
B26
GND
-
GND
-
4-88
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
C11
GND
C16
C21
LFE2-35E/35SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
C6
GND
-
GND
-
F18
GND
-
GND
-
F24
GND
-
GND
-
F3
GND
-
GND
-
Dual Function
Differential
F9
GND
-
GND
-
J13
GND
-
GND
-
J14
GND
-
GND
-
J21
GND
-
GND
-
J6
GND
-
GND
-
K10
GND
-
GND
-
K11
GND
-
GND
-
K13
GND
-
GND
-
K14
GND
-
GND
-
K16
GND
-
GND
-
K17
GND
-
GND
-
L10
GND
-
GND
-
L11
GND
-
GND
-
L16
GND
-
GND
-
L17
GND
-
GND
-
L24
GND
-
GND
-
L3
GND
-
GND
-
M13
GND
-
GND
-
M14
GND
-
GND
-
N10
GND
-
GND
-
N12
GND
-
GND
-
N13
GND
-
GND
-
N14
GND
-
GND
-
N15
GND
-
GND
-
N17
GND
-
GND
-
P10
GND
-
GND
-
P12
GND
-
GND
-
P13
GND
-
GND
-
P14
GND
-
GND
-
P15
GND
-
GND
-
P17
GND
-
GND
-
R13
GND
-
GND
-
R14
GND
-
GND
-
T10
GND
-
GND
-
T11
GND
-
GND
-
T16
GND
-
GND
-
T17
GND
-
GND
-
T24
GND
-
GND
-
T3
GND
-
GND
-
U10
GND
-
GND
-
4-89
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-20E/SE and LFE2-35E/SE Logic Signal Connections: 672 fpBGA
LFE2-20E/20SE
Ball
Number
Ball/Pad
Function
Bank
U11
GND
U13
U14
LFE2-35E/35SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
U16
GND
-
GND
-
U17
GND
-
GND
-
V13
GND
-
GND
-
V14
GND
-
GND
-
V21
GND
-
GND
-
V6
GND
-
GND
-
Dual Function
Differential
M3
NC
-
NC
-
N6
NC
-
NC
-
P24
NC
-
NC
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
***Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-90
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
LFE2-70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
D2
PL2A
7
VREF2_7
Bank
Dual Function
T (LVDS)*
PL2A
7
VREF2_7
D1
PL2B
7
VREF1_7
T (LVDS)*
C (LVDS)*
PL2B
7
VREF1_7
C (LVDS)*
GND
GNDIO7
-
GNDIO7
-
F6
PL5A
7
LDQ8
F5
PL5B
7
LDQ8
T
PL18A
7
LDQ21
T
C
PL18B
7
LDQ21
C
VCCIO
VCCIO7
7
E4
PL6A
7
LDQ8
T (LVDS)*
VCCIO7
7
PL19A
E3
PL6B
7
LDQ8
C (LVDS)*
7
LDQ21
T (LVDS)*
PL19B
7
LDQ21
C (LVDS)*
E2
PL7A
7
LDQ8
E1
PL7B
7
LDQ8
T
PL20A
7
LDQ21
T
C
PL20B
7
LDQ21
C
GND
GNDIO7
-
GNDIO7
-
H6
PL8A
7
LDQS8
H5
PL8B
7
LDQ8
T (LVDS)*
PL21A
7
LDQS21
T (LVDS)*
C (LVDS)*
PL21B
7
LDQ21
C (LVDS)*
F2
PL9A
7
LDQ8
T
VCCIO
VCCIO7
7
LDQ21
T
PL22A
7
VCCIO7
7
Differential
F1
PL9B
7
LDQ8
C
PL22B
7
LDQ21
C
H8
PL10A
7
LDQ8
T (LVDS)*
PL23A
7
LDQ21
T (LVDS)*
J9
PL10B
7
LDQ8
C (LVDS)*
PL23B
7
LDQ21
C (LVDS)*
G4
PL11A
7
LDQ8
T
PL24A
7
LDQ21
T
GND
GNDIO7
-
GNDIO7
-
G3
PL11B
7
LDQ8
C
PL24B
7
LDQ21
C
H7
PL12A
7
LDQ16
T (LVDS)*
PL25A
7
LDQ29
T (LVDS)*
C (LVDS)*
J8
PL12B
7
LDQ16
C (LVDS)*
PL25B
7
LDQ29
G2
PL13A
7
LDQ16
T
PL26A
7
LDQ29
T
G1
PL13B
7
LDQ16
C
PL26B
7
LDQ29
C
H3
PL14A
7
LDQ16
T (LVDS)*
PL27A
7
LDQ29
T (LVDS)*
VCCIO
VCCIO7
7
VCCIO7
7
C (LVDS)*
H4
PL14B
7
LDQ16
C (LVDS)*
PL27B
7
LDQ29
J5
PL15A
7
LDQ16
T
PL28A
7
LDQ29
T
J4
PL15B
7
LDQ16
C
PL28B
7
LDQ29
C
J3
PL16A
7
LDQS16
T (LVDS)*
PL29A
7
LDQS29
T (LVDS)*
GND
GNDIO7
-
GNDIO7
C (LVDS)*
K4
PL16B
7
LDQ16
C (LVDS)*
PL29B
7
LDQ29
H1
PL17A
7
LDQ16
T
PL30A
7
LDQ29
T
H2
PL17B
7
LDQ16
C
PL30B
7
LDQ29
C
VCCIO
VCCIO7
7
VCCIO7
7
K6
PL18A
7
LDQ16
T (LVDS)*
PL31A
7
LDQ29
T (LVDS)*
K7
PL18B
7
LDQ16
C (LVDS)*
PL31B
7
LDQ29
C (LVDS)*
J1
PL19A
7
LDQ16
T
PL32A
7
LDQ29
T
J2
PL19B
7
LDQ16
C
PL32B
7
LDQ29
C
GND
GNDIO7
-
GNDIO7
-
VCCIO
VCCIO7
7
VCCIO7
7
K3
PL23A
7
LDQ24
T
PL36A
7
LDQ37
T
LDQ24
C
LDQ37
C
K2
PL23B
7
GND
GNDIO7
-
K1
PL24A
7
LDQS24***
L2
PL24B
7
LDQ24
PL36B
7
GNDIO7
-
T (LVDS)*
PL37A
7
LDQS37***
T (LVDS)*
C (LVDS)*
PL37B
7
LDQ37
C (LVDS)*
4-91
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
LFE2-70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
L1
PL25A
7
LUM0_SPLLT_IN_A/LDQ24
Bank
Dual Function
Differential
T
PL38A
7
LUM0_SPLLT_IN_A/LDQ37
T
VCCIO
VCCIO7
7
M2
PL25B
7
LUM0_SPLLC_IN_A/LDQ24
C
VCCIO7
PL38B
7
M1
PL26A
7
LUM0_SPLLT_FB_A/LDQ24
T
PL39A
7
LUM0_SPLLC_IN_A/LDQ37
C
7
LUM0_SPLLT_FB_A/LDQ37
N2
PL26B
7
LUM0_SPLLC_FB_A/LDQ24
C
PL39B
7
T
LUM0_SPLLC_FB_A/LDQ37
C
GND
GNDIO7
-
GNDIO7
-
M8
VCCPLL
7
NC
-
VCCIO
VCCIO7
7
VCCIO7
7
GND
GNDIO7
-
GNDIO7
-
N1
PL37A
7
LDQ41
PL50A
7
LDQ54
L8
PL38A
7
LDQ41
T
PL51A
7
LDQ54
T
K8
PL38B
7
LDQ41
C
PL51B
7
LDQ54
C
VCCIO
VCCIO7
7
VCCIO7
7
L6
PL39A
7
LDQ41
T (LVDS)*
PL52A
7
LDQ54
T (LVDS)*
K5
PL39B
7
LDQ41
C (LVDS)*
PL52B
7
LDQ54
C (LVDS)*
L7
PL40A
7
LDQ41
T
PL53A
7
LDQ54
T
L5
PL40B
7
LDQ41
C
PL53B
7
LDQ54
C
GND
GNDIO7
-
GNDIO7
-
P1
PL41A
7
LDQS41
T (LVDS)*
PL54A
7
LDQS54
T (LVDS)*
P2
PL41B
7
LDQ41
C (LVDS)*
PL54B
7
LDQ54
C (LVDS)*
LDQ41
T
LDQ54
T
M6
PL42A
7
VCCIO
VCCIO7
7
N8
PL42B
7
LDQ41
R1
PL43A
7
LDQ41
R2
PL43B
7
LDQ41
C (LVDS)*
PCLKT7_0/LDQ41
T
M7
PL44A
7
GND
GNDIO7
-
N9
PL44B
7
PCLKC7_0/LDQ41
M4
PL46A
6
PCLKT6_0/LDQ50
PL55A
7
VCCIO7
7
C
PL55B
7
LDQ54
C
T (LVDS)*
PL56A
7
LDQ54
T (LVDS)*
PL56B
7
LDQ54
C (LVDS)*
PCLKT7_0/LDQ54
T
PL57A
7
GNDIO7
-
C
PL57B
7
PCLKC7_0/LDQ54
C
T (LVDS)*
PL59A
6
PCLKT6_0/LDQ63
T (LVDS)*
C (LVDS)*
M5
PL46B
6
PCLKC6_0/LDQ50
C (LVDS)*
PL59B
6
PCLKC6_0/LDQ63
N7
PL47A
6
VREF2_6/LDQ50
T
PL60A
6
VREF2_6/LDQ63
T
P9
PL47B
6
VREF1_6/LDQ50
C
PL60B
6
VREF1_6/LDQ63
C
N3
PL48A
6
LDQ50
T (LVDS)*
PL61A
6
LDQ63
T (LVDS)*
VCCIO
VCCIO6
6
VCCIO6
6
N4
PL48B
6
LDQ50
C (LVDS)*
PL61B
6
LDQ63
C (LVDS)*
N5
PL49A
6
LDQ50
T
PL62A
6
LDQ63
T
P7
PL49B
6
LDQ50
C
PL62B
6
LDQ63
C
LDQS50
T (LVDS)*
PL63A
6
LDQS63
T (LVDS)*
GNDIO6
-
T1
PL50A
6
GND
GNDIO6
-
T2
PL50B
6
LDQ50
C (LVDS)*
PL63B
6
LDQ63
C (LVDS)*
P8
PL51A
6
LDQ50
T
PL64A
6
LDQ63
T
LDQ50
C
LDQ63
C
P6
PL51B
6
VCCIO
VCCIO6
6
P5
PL52A
6
LDQ50
P4
PL52B
6
LDQ50
U1
PL53A
6
LDQ50
V1
PL53B
6
LDQ50
PL64B
6
VCCIO6
6
T (LVDS)*
PL65A
6
LDQ63
T (LVDS)*
C (LVDS)*
PL65B
6
LDQ63
C (LVDS)*
T
PL66A
6
LDQ63
T
C
PL66B
6
LDQ63
C
4-92
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
GND
GNDIO6
-
Dual Function
LFE2-70E/SE
Differential
Ball/Pad
Function
Bank
GNDIO6
-
Dual Function
Differential
P3
PL54A
6
LDQ58
T (LVDS)*
PL67A
6
LDQ71
T (LVDS)*
R3
PL54B
6
LDQ58
C (LVDS)*
PL67B
6
LDQ71
C (LVDS)*
R4
PL55A
6
LDQ58
T
PL68A
6
LDQ71
T
U2
PL55B
6
LDQ58
C
PL68B
6
LDQ71
C
VCCIO
VCCIO6
6
VCCIO6
6
V2
PL56A
6
LDQ58
T (LVDS)*
PL69A
6
LDQ71
T (LVDS)*
W2
PL56B
6
LDQ58
C (LVDS)*
PL69B
6
LDQ71
C (LVDS)*
T6
PL57A
6
LDQ58
T
PL70A
6
LDQ71
T
LDQ58
C
LDQ71
C
R5
PL57B
6
GND
GNDIO6
-
PL70B
6
GNDIO6
-
R6
PL58A
6
LDQS58
R7
PL58B
6
LDQ58
T (LVDS)*
PL71A
6
LDQS71
T (LVDS)*
C (LVDS)*
PL71B
6
LDQ71
C (LVDS)*
LDQ58
T
LDQ71
T
W1
PL59A
6
VCCIO
VCCIO6
6
Y2
PL59B
6
LDQ58
Y1
PL60A
6
LLM0_GDLLT_IN_A**/LDQ58
AA2
PL60B
6
LLM0_GDLLC_IN_A**/LDQ58
C (LVDS)*
T5
PL61A
6
LLM0_GDLLT_FB_A/LDQ58
T
GND
GNDIO6
-
GNDIO6
-
T7
PL61B
6
R8
VCCPLL
6
LLM0_GDLLC_FB_D/LDQ58
PL72A
6
VCCIO6
6
C
PL72B
6
LDQ71
C
T (LVDS)*
PL73A
6
LLM0_GDLLT_IN_A**/LDQ71
T (LVDS)*
PL73B
6
LLM0_GDLLC_IN_A**/LDQ71
C (LVDS)*
PL74A
6
LLM0_GDLLT_FB_A/LDQ71
T
LLM0_GDLLC_FB_D/LDQ71
C
C
PL74B
6
VCCPLL
-
T8
LLM0_PLLCAP
6
LLM0_PLLCAP
6
U3
PL63A
6
LLM0_GPLLT_IN_A**/LDQ67
T (LVDS)*
PL76A
6
LLM0_GPLLT_IN_A**/LDQ80
T (LVDS)*
U4
PL63B
6
LLM0_GPLLC_IN_A**/LDQ67
C (LVDS)*
PL76B
6
LLM0_GPLLC_IN_A**/LDQ80
C (LVDS)*
V3
PL64A
6
LLM0_GPLLT_FB_A/LDQ67
T
PL77A
6
LLM0_GPLLT_FB_A/LDQ80
T
U5
PL64B
6
LLM0_GPLLC_FB_A/LDQ67
C
PL77B
6
LLM0_GPLLC_FB_A/LDQ80
C
LDQ67
T (LVDS)*
PL78A
6
LDQ80
T (LVDS)*
VCCIO6
6
C (LVDS)*
V4
PL65A
6
VCCIO
VCCIO6
6
V5
PL65B
6
LDQ67
C (LVDS)*
PL78B
6
LDQ80
Y3
PL66A
6
LDQ67
T
PL79A
6
LDQ80
T
Y4
PL66B
6
LDQ67
C
PL79B
6
LDQ80
C
W3
PL67A
6
LDQS67
T (LVDS)*
PL80A
6
LDQS80
T (LVDS)*
GND
GNDIO6
-
GNDIO6
-
W4
PL67B
6
LDQ67
C (LVDS)*
PL80B
6
LDQ80
C (LVDS)*
AA1
PL68A
6
LDQ67
T
PL81A
6
LDQ80
T
AB1
PL68B
6
LDQ67
C
PL81B
6
LDQ80
C
VCCIO
VCCIO6
6
VCCIO6
6
U8
PL69A
6
LDQ67
T (LVDS)*
PL82A
6
LDQ80
T (LVDS)*
U7
PL69B
6
LDQ67
C (LVDS)*
PL82B
6
LDQ80
C (LVDS)*
V8
PL70A
6
LDQ67
T
PL83A
6
LDQ80
T
LDQ67
C
LDQ80
C
U6
PL70B
6
GND
GNDIO6
-
W6
PL71A
6
LDQ75
W5
PL71B
6
LDQ75
PL83B
6
GNDIO6
-
T (LVDS)*
PL84A
6
LDQ88
T (LVDS)*
C (LVDS)*
PL84B
6
LDQ88
C (LVDS)*
AC1
PL72A
6
LDQ75
T
PL85A
6
LDQ88
T
AD1
PL72B
6
LDQ75
C
PL85B
6
LDQ88
C
4-93
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO6
6
Y6
PL73A
6
LDQ75
Y5
PL73B
6
LDQ75
Dual Function
LFE2-70E/SE
Ball/Pad
Function
Bank
VCCIO6
6
T (LVDS)*
PL86A
6
LDQ88
T (LVDS)*
C (LVDS)*
PL86B
6
LDQ88
C (LVDS)*
Differential
Dual Function
Differential
AE2
PL74A
6
LDQ75
T
PL87A
6
LDQ88
T
AD2
PL74B
6
LDQ75
C
PL87B
6
LDQ88
C
GND
GNDIO6
-
GNDIO6
-
AB3
PL75A
6
LDQS75
T (LVDS)*
PL88A
6
LDQS88
T (LVDS)*
AB2
PL75B
6
LDQ75
C (LVDS)*
PL88B
6
LDQ88
C (LVDS)*
W7
PL76A
6
LDQ75
T
PL89A
6
LDQ88
T
VCCIO
VCCIO6
6
VCCIO6
6
W8
PL76B
6
LDQ75
C
PL89B
6
LDQ88
C
Y7
PL77A
6
LDQ75
T (LVDS)*
PL90A
6
LDQ88
T (LVDS)*
Y8
PL77B
6
LDQ75
C (LVDS)*
PL90B
6
LDQ88
C (LVDS)*
AC2
PL78A
6
LDQ75
T
PL91A
6
LDQ88
T
GND
GNDIO6
-
GNDIO6
-
AD3
PL78B
6
PL91B
6
LDQ88
C
AC3
TCK
-
TCK
-
AA8
TDI
-
TDI
-
AB4
TMS
-
TMS
-
AA5
TDO
-
TDO
-
AB5
VCCJ
-
VCCJ
-
AE3
PB2A
5
VREF2_5/BDQ6
T
PB2A
5
VREF2_5/BDQ6
T
AF3
PB2B
5
VREF1_5/BDQ6
C
PB2B
5
VREF1_5/BDQ6
C
LDQ75
C
AC4
PB3A
5
BDQ6
T
PB3A
5
BDQ6
T
AD4
PB3B
5
BDQ6
C
PB3B
5
BDQ6
C
AE4
PB4A
5
BDQ6
T
PB4A
5
BDQ6
T
AF4
PB4B
5
BDQ6
C
PB4B
5
BDQ6
C
VCCIO
VCCIO5
5
VCCIO5
5
V9
PB5A
5
BDQ6
T
PB5A
5
BDQ6
T
W9
PB5B
5
BDQ6
C
PB5B
5
BDQ6
C
GND
GNDIO5
-
GNDIO5
-
AA6
PB6A
5
BDQS6
T
PB6A
5
BDQS6
T
AB6
PB6B
5
BDQ6
C
PB6B
5
BDQ6
C
AC5
PB7A
5
BDQ6
T
PB7A
5
BDQ6
T
AD5
PB7B
5
BDQ6
C
PB7B
5
BDQ6
C
AA7
PB8A
5
BDQ6
T
PB8A
5
BDQ6
T
AB7
PB8B
5
BDQ6
C
PB8B
5
BDQ6
C
VCCIO
VCCIO5
5
VCCIO5
5
AE5
PB9A
5
BDQ6
T
PB9A
5
BDQ6
T
AF5
PB9B
5
BDQ6
C
PB9B
5
BDQ6
C
AC7
PB10A
5
BDQ6
T
PB10A
5
BDQ6
T
BDQ6
C
PB10B
5
BDQ6
C
VCCIO5
5
AD7
PB10B
5
VCCIO
VCCIO5
5
GND
GNDIO5
-
GNDIO5
-
W10
PB20A
5
BDQ24
T
PB29A
5
BDQ33
T
Y10
PB20B
5
BDQ24
C
PB29B
5
BDQ33
C
W11
PB21A
5
BDQ24
T
PB30A
5
BDQ33
T
4-94
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
AA10
PB21B
5
BDQ24
LFE2-70E/SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
C
PB30B
5
BDQ33
C
AC8
PB22A
5
BDQ24
T
PB31A
5
BDQ33
T
AD8
PB22B
5
BDQ24
C
PB31B
5
BDQ33
C
VCCIO
VCCIO5
5
VCCIO5
5
AB8
PB23A
5
BDQ24
T
PB32A
5
BDQ33
T
AB10
PB23B
5
BDQ24
C
PB32B
5
BDQ33
C
GND
GNDIO5
-
GNDIO5
-
AE6
PB24A
5
BDQS24
T
PB33A
5
BDQS33
T
AF6
PB24B
5
BDQ24
C
PB33B
5
BDQ33
C
AA11
PB25A
5
BDQ24
T
PB34A
5
BDQ33
T
AC9
PB25B
5
BDQ24
C
PB34B
5
BDQ33
C
AB9
PB26A
5
BDQ24
T
PB35A
5
BDQ33
T
AD9
PB26B
5
BDQ24
C
PB35B
5
BDQ33
C
VCCIO
VCCIO5
5
VCCIO5
5
Y11
PB27A
5
BDQ24
T
PB36A
5
BDQ33
T
AB11
PB27B
5
BDQ24
C
PB36B
5
BDQ33
C
AE7
PB28A
5
BDQ24
T
PB37A
5
BDQ33
T
BDQ24
C
BDQ33
C
AF7
PB28B
5
GND
GNDIO5
-
PB37B
5
GNDIO5
-
AC10
PB29A
5
BDQ33
T
PB38A
5
BDQ42
T
AD10
PB29B
5
BDQ33
C
PB38B
5
BDQ42
C
AA12
PB30A
5
BDQ33
T
PB39A
5
BDQ42
T
W12
PB30B
5
BDQ33
C
PB39B
5
BDQ42
C
BDQ33
T
BDQ42
T
C
AB12
PB31A
5
VCCIO
VCCIO5
5
PB40A
5
VCCIO5
5
Y12
PB31B
5
BDQ33
C
PB40B
5
BDQ42
AD12
PB32A
5
BDQ33
T
PB41A
5
BDQ42
T
AC12
PB32B
5
BDQ33
C
PB41B
5
BDQ42
C
AC13
PB33A
5
BDQS33
T
BDQS42
T
GND
GNDIO5
-
C
PB42A
5
GNDIO5
-
AA13
PB33B
5
BDQ33
C
PB42B
5
BDQ42
AD13
PB34A
5
BDQ33
T
PB43A
5
BDQ42
T
AC14
PB34B
5
BDQ33
C
PB43B
5
BDQ42
C
BDQ33
T
BDQ42
T
C
AE8
PB35A
5
VCCIO
VCCIO5
5
PB44A
5
VCCIO5
5
AF8
PB35B
5
BDQ33
C
PB44B
5
BDQ42
AB15
PB36A
5
BDQ33
T
PB45A
5
BDQ42
T
Y13
PB36B
5
BDQ33
C
PB45B
5
BDQ42
C
BDQ33
T
BDQ42
T
C
AE9
PB37A
5
GND
GNDIO5
-
PB46A
5
GNDIO5
-
AF9
PB37B
5
BDQ33
C
PB46B
5
BDQ42
W13
PB38A
5
AA14
PB38B
5
BDQ42
T
PB47A
5
BDQ51
T
BDQ42
C
PB47B
5
BDQ51
C
AE10
PB39A
5
BDQ42
T
PB48A
5
BDQ51
T
AF10
PB39B
5
BDQ42
C
PB48B
5
BDQ51
C
W14
PB40A
5
BDQ42
T
PB49A
5
BDQ51
T
AB13
PB40B
5
BDQ42
C
PB49B
5
BDQ51
C
4-95
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO5
5
Dual Function
LFE2-70E/SE
Differential
Ball/Pad
Function
Bank
VCCIO5
5
Dual Function
Differential
Y14
PB41A
5
BDQ42
T
PB50A
5
BDQ51
T
AB14
PB41B
5
BDQ42
C
PB50B
5
BDQ51
C
GND
GNDIO5
-
GNDIO5
-
AE11
PB42A
5
BDQS42
T
PB51A
5
BDQS51
T
AF11
PB42B
5
BDQ42
C
PB51B
5
BDQ51
C
AD14
PB43A
5
BDQ42
T
PB52A
5
BDQ51
T
AA15
PB43B
5
BDQ42
C
PB52B
5
BDQ51
C
AE12
PB44A
5
PCLKT5_0/BDQ42
T
PB53A
5
PCLKT5_0/BDQ51
T
PCLKC5_0/BDQ42
C
PB53B
5
PCLKC5_0/BDQ51
C
VCCIO5
5
PCLKT4_0/BDQ60
T
C
AF12
PB44B
5
VCCIO
VCCIO5
5
GND
GNDIO5
-
AD15
PB49A
4
VCCIO
VCCIO4
4
AC15
PB49B
4
PCLKC4_0/BDQ51
C
PB58B
4
PCLKC4_0/BDQ60
AE13
PB50A
4
BDQ51
T
PB59A
4
BDQ60
T
AF13
PB50B
4
BDQ51
C
PB59B
4
BDQ60
C
AB17
PB51A
4
BDQS51
T
BDQS60
T
GND
GNDIO4
-
C
PCLKT4_0/BDQ51
T
GNDIO5
-
PB58A
4
VCCIO4
4
PB60A
4
GNDIO4
-
Y15
PB51B
4
BDQ51
C
PB60B
4
BDQ60
AE14
PB52A
4
BDQ51
T
PB61A
4
BDQ60
T
AF14
PB52B
4
BDQ51
C
PB61B
4
BDQ60
C
BDQ51
T
BDQ60
T
C
AA16
PB53A
4
VCCIO
VCCIO4
4
PB62A
4
VCCIO4
4
W15
PB53B
4
BDQ51
C
PB62B
4
BDQ60
AC17
PB54A
4
AB16
PB54B
4
BDQ51
T
PB63A
4
BDQ60
T
BDQ51
C
PB63B
4
BDQ60
C
AE15
PB55A
4
GND
GNDIO4
-
BDQ51
T
BDQ60
T
C
PB64A
4
GNDIO4
-
AF15
PB55B
4
BDQ51
C
PB64B
4
BDQ60
AE16
PB56A
4
BDQ60
T
PB65A
4
BDQ69
T
AF16
PB56B
4
BDQ60
C
PB65B
4
BDQ69
C
Y16
PB57A
4
BDQ60
T
PB66A
4
BDQ69
T
C
AB18
PB57B
4
BDQ60
C
PB66B
4
BDQ69
AD17
PB58A
4
BDQ60
T
PB67A
4
BDQ69
T
AD18
PB58B
4
BDQ60
C
PB67B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
AC18
PB59A
4
BDQ60
T
PB68A
4
BDQ69
T
AD19
PB59B
4
BDQ60
C
PB68B
4
BDQ69
C
GND
GNDIO4
-
GNDIO4
-
AC19
PB60A
4
BDQS60
T
PB69A
4
BDQS69
T
AE17
PB60B
4
BDQ60
C
PB69B
4
BDQ69
C
AB19
PB61A
4
BDQ60
T
PB70A
4
BDQ69
T
AE19
PB61B
4
BDQ60
C
PB70B
4
BDQ69
C
AF17
PB62A
4
BDQ60
T
PB71A
4
BDQ69
T
AE18
PB62B
4
BDQ60
C
PB71B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
4-96
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
W16
PB63A
4
BDQ60
AA17
PB63B
4
AF18
PB64A
4
AF19
PB64B
4
LFE2-70E/SE
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
T
PB72A
4
BDQ69
T
BDQ60
C
PB72B
4
BDQ69
C
BDQ60
T
PB73A
4
BDQ69
T
BDQ60
C
PB73B
4
BDQ69
C
GND
GNDIO4
-
GNDIO4
-
AA19
PB65A
4
BDQ69
T
PB74A
4
BDQ78
T
W17
PB65B
4
BDQ69
C
PB74B
4
BDQ78
C
Y19
PB66A
4
BDQ69
T
PB75A
4
BDQ78
T
Y17
PB66B
4
BDQ69
C
PB75B
4
BDQ78
C
BDQ69
T
BDQ78
T
C
AF20
PB67A
4
VCCIO
VCCIO4
4
PB76A
4
VCCIO4
4
AE20
PB67B
4
BDQ69
AA20
PB68A
4
BDQ69
C
PB76B
4
BDQ78
T
PB77A
4
BDQ78
W18
PB68B
4
T
BDQ69
C
PB77B
4
BDQ78
C
AD20
PB69A
4
GND
GNDIO4
-
BDQS69
T
BDQS78
T
AE21
PB69B
4
BDQ69
C
AF21
PB70A
4
AF22
PB70B
4
VCCIO
VCCIO4
GND
GNDIO4
AE22
PB74A
4
BDQ78
AD22
PB74B
4
BDQ78
PB78A
4
GNDIO4
-
C
PB78B
4
BDQ78
BDQ69
T
PB79A
4
BDQ78
T
BDQ69
C
PB79B
4
BDQ78
C
4
VCCIO4
4
-
GNDIO4
-
T
PB92A
4
BDQ96
T
C
PB92B
4
BDQ96
C
AF23
PB75A
4
BDQ78
T
PB93A
4
BDQ96
T
AE23
PB75B
4
BDQ78
C
PB93B
4
BDQ96
C
AD23
PB76A
4
BDQ78
T
PB94A
4
BDQ96
T
AC23
PB76B
4
BDQ78
C
PB94B
4
BDQ96
C
VCCIO
VCCIO4
4
VCCIO4
4
AB20
PB77A
4
BDQ78
T
PB95A
4
BDQ96
T
AC20
PB77B
4
BDQ78
C
PB95B
4
BDQ96
C
GND
GNDIO4
-
GNDIO4
-
AB21
PB78A
4
BDQS78
T
PB96A
4
BDQS96
T
AC22
PB78B
4
BDQ78
C
PB96B
4
BDQ96
C
W19
PB79A
4
BDQ78
T
PB97A
4
BDQ96
T
AA21
PB79B
4
BDQ78
C
PB97B
4
BDQ96
C
AF24
PB80A
4
BDQ78
T
PB98A
4
BDQ96
T
AE24
PB80B
4
BDQ78
C
PB98B
4
BDQ96
C
VCCIO
VCCIO4
4
VCCIO4
4
Y20
PB81A
4
BDQ78
T
PB99A
4
BDQ96
T
AB22
PB81B
4
BDQ78
C
PB99B
4
BDQ96
C
Y21
PB82A
4
VREF2_4/BDQ78
T
PB100A
4
VREF2_4/BDQ96
T
AB23
PB82B
4
VREF1_4/BDQ78
C
PB100B
4
VREF1_4/BDQ96
C
GND
GNDIO4
-
GNDIO4
-
AD24
CFG2
8
CFG2
8
W20
CFG1
8
CFG1
8
AC24
CFG0
8
CFG0
8
V19
PROGRAMN
8
PROGRAMN
8
4-97
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
AA22
CCLK
8
LFE2-70E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
CCLK
8
Dual Function
Differential
C
AB24
INITN
8
INITN
8
AD25
DONE
8
DONE
8
GND
GNDIO8
-
GNDIO8
-
W21
PR77B
8
WRITEN
C
PR90B
8
WRITEN
Y22
PR77A
8
CS1N
T
PR90A
8
CS1N
T
AC25
PR76B
8
CSN
C
PR89B
8
CSN
C
D0/SPIFASTN
T
D0/SPIFASTN
T
C
AB25
PR76A
8
VCCIO
VCCIO8
8
PR89A
8
VCCIO8
8
AD26
PR75B
8
D1
AC26
PR75A
8
D2
C
PR88B
8
D1
T
PR88A
8
D2
Y23
PR74B
8
T
D3
C
PR87B
8
D3
C
GND
GNDIO8
-
W22
PR74A
GNDIO8
-
8
D4
T
PR87A
8
AA25
D4
T
PR73B
8
D5
C
PR86B
8
D5
C
AB26
PR73A
8
D6
T
PR86A
8
D6
T
W23
PR72B
8
D7
C
PR85B
8
D7
C
VCCIO
VCCIO8
8
VCCIO8
8
V22
PR72A
8
DI/CSSPI0N
T
PR85A
8
DI/CSSPI0N
T
Y24
PR71B
8
DOUT/CSON
C
PR84B
8
DOUT/CSON
C
Y25
PR71A
8
BUSY/SISPI
T
PR84A
8
BUSY/SISPI
T
W24
PR70B
3
RDQ67
C
PR83B
3
RDQ80
C
GND
GNDIO3
-
GNDIO3
-
V23
PR70A
3
RDQ67
T
PR83A
3
RDQ80
T
AA26
PR69B
3
RDQ67
C (LVDS)*
PR82B
3
RDQ80
C (LVDS)*
Y26
PR69A
3
RDQ67
T (LVDS)*
PR82A
3
RDQ80
T (LVDS)*
U21
PR68B
3
RDQ67
C
PR81B
3
RDQ80
C
VCCIO
VCCIO3
3
VCCIO3
3
U19
PR68A
3
RDQ67
T
PR81A
3
RDQ80
T
W25
PR67B
3
RDQ67
C (LVDS)*
PR80B
3
RDQ80
C (LVDS)*
RDQS67
T (LVDS)*
RDQS80
T (LVDS)*
C
W26
PR67A
3
GND
GNDIO3
-
PR80A
3
GNDIO3
-
V24
PR66B
3
RDQ67
C
PR79B
3
RDQ80
V25
PR66A
3
V26
PR65B
3
RDQ67
T
PR79A
3
RDQ80
T
RDQ67
C (LVDS)*
PR78B
3
RDQ80
C (LVDS)*
RDQ67
T (LVDS)*
PR78A
3
RDQ80
T (LVDS)*
VCCIO3
3
C
U26
PR65A
3
VCCIO
VCCIO3
3
U22
PR64B
3
RLM0_GPLLC_FB_A/RDQ67
C
PR77B
3
RLM0_GPLLC_FB_A/RDQ80
U23
PR64A
3
RLM0_GPLLT_FB_A/RDQ67
T
PR77A
3
RLM0_GPLLT_FB_A/RDQ80
T
U24
PR63B
3
RLM0_GPLLC_IN_A**/RDQ67
C (LVDS)*
PR76B
3
RLM0_GPLLC_IN_A**/RDQ80
C (LVDS)*
U25
PR63A
3
RLM0_GPLLT_IN_A**/RDQ67
T (LVDS)*
PR76A
3
RLM0_GPLLT_IN_A**/RDQ80
T (LVDS)*
R20
RLM0_PLLCAP
3
RLM0_PLLCAP
3
P18
VCCPLL
3
VCCPLL
-
T19
PR61B
3
RLM0_GDLLC_FB_A/RDQ58
C
PR74B
3
RLM0_GDLLC_FB_A/RDQ71
C
U20
PR61A
3
RLM0_GDLLT_FB_A/RDQ58
T
PR74A
3
RLM0_GDLLT_FB_A/RDQ71
T
GND
GNDIO3
-
GNDIO3
-
T25
PR60B
3
PR73B
3
RLM0_GDLLC_IN_A**/RDQ71
C (LVDS)*
RLM0_GDLLC_IN_A**/RDQ58
C (LVDS)*
4-98
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
LFE2-70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
T26
PR60A
3
RLM0_GDLLT_IN_A**/RDQ58
Bank
Dual Function
Differential
T (LVDS)*
PR73A
3
RLM0_GDLLT_IN_A**/RDQ71
T (LVDS)*
T20
PR59B
3
T22
PR59A
3
RDQ58
C
PR72B
3
RDQ71
C
RDQ58
T
PR72A
3
RDQ71
VCCIO
VCCIO3
3
T
VCCIO3
3
R26
PR58B
3
RDQ58
C (LVDS)*
PR71B
R25
PR58A
3
RDQS58
T (LVDS)*
PR71A
3
RDQ71
C (LVDS)*
3
RDQS71
R22
PR57B
3
RDQ58
C
PR70B
3
T (LVDS)*
RDQ71
GND
GNDIO3
-
GNDIO3
-
C
T21
PR57A
3
RDQ58
T
PR70A
3
RDQ71
T
P26
PR56B
3
RDQ58
C (LVDS)*
PR69B
P25
PR56A
3
RDQ58
T (LVDS)*
PR69A
3
RDQ71
C (LVDS)*
3
RDQ71
R24
PR55B
3
RDQ58
C
PR68B
3
T (LVDS)*
RDQ71
VCCIO
VCCIO3
3
VCCIO3
3
C
R23
PR55A
3
RDQ58
T
PR68A
3
RDQ71
T
P20
PR54B
3
RDQ58
C (LVDS)*
PR67B
3
RDQ71
C (LVDS)*
R19
PR54A
3
RDQ58
T (LVDS)*
PR67A
3
RDQ71
T (LVDS)*
P21
PR53B
3
RDQ50
C
PR66B
3
RDQ63
C
GND
GNDIO3
-
GNDIO3
-
P19
PR53A
3
RDQ50
T
PR66A
3
RDQ63
T
P23
PR52B
3
RDQ50
C (LVDS)*
PR65B
3
RDQ63
C (LVDS)*
P22
PR52A
3
RDQ50
T (LVDS)*
PR65A
3
RDQ63
T (LVDS)*
N22
PR51B
3
RDQ50
C
PR64B
3
RDQ63
C
VCCIO
VCCIO3
3
VCCIO3
3
R21
PR51A
3
RDQ50
T
PR64A
3
RDQ63
T
N26
PR50B
3
RDQ50
C (LVDS)*
PR63B
3
RDQ63
C (LVDS)*
RDQS50
T (LVDS)*
RDQS63
T (LVDS)*
C
N25
PR50A
3
GND
GNDIO3
-
N19
PR49B
3
RDQ50
N20
PR49A
3
RDQ50
M26
PR48B
3
M25
PR48A
3
VCCIO
VCCIO3
3
N18
PR47B
3
N21
PR47A
3
L26
PR46B
3
PR63A
3
GNDIO3
-
C
PR62B
3
RDQ63
T
PR62A
3
RDQ63
T
RDQ50
C (LVDS)*
PR61B
3
RDQ63
C (LVDS)*
RDQ50
T (LVDS)*
RDQ63
T (LVDS)*
VREF2_3/RDQ63
C
PR61A
3
VCCIO3
3
C
PR60B
3
VREF1_3/RDQ50
T
PR60A
3
VREF1_3/RDQ63
T
PCLKC3_0/RDQ50
C (LVDS)*
PR59B
3
PCLKC3_0/RDQ63
C (LVDS)*
VREF2_3/RDQ50
L25
PR46A
3
PCLKT3_0/RDQ50
T (LVDS)*
PR59A
3
PCLKT3_0/RDQ63
T (LVDS)*
N24
PR44B
2
PCLKC2_0/RDQ41
C
PR57B
2
PCLKC2_0/RDQ54
C
M23
PR44A
2
PCLKT2_0/RDQ41
T
PR57A
2
PCLKT2_0/RDQ54
T
GND
GNDIO2
-
GNDIO2
-
L21
PR43B
2
RDQ41
C (LVDS)*
PR56B
2
RDQ54
C (LVDS)*
K22
PR43A
2
RDQ41
T (LVDS)*
PR56A
2
RDQ54
T (LVDS)*
M24
PR42B
2
RDQ41
C
PR55B
2
RDQ54
C
N23
PR42A
2
RDQ41
T
PR55A
2
RDQ54
T
VCCIO
VCCIO2
2
VCCIO2
2
K26
PR41B
2
RDQ41
C (LVDS)*
PR54B
2
RDQ54
C (LVDS)*
K25
PR41A
2
RDQS41
T (LVDS)*
PR54A
2
RDQS54
T (LVDS)*
M20
PR40B
2
RDQ41
C
PR53B
2
RDQ54
C
4-99
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
LFE2-70E/SE
Ball
Number
Ball/Pad
Function
Bank
GND
GNDIO2
-
M19
PR40A
2
RDQ41
L22
PR39B
2
RDQ41
M22
PR39A
2
RDQ41
T (LVDS)*
PR52A
K21
PR38B
2
RDQ41
C
PR51B
VCCIO
VCCIO2
2
VCCIO2
2
M21
PR38A
2
RDQ41
T
PR51A
2
RDQ54
T
K24
PR37B
2
RDQ41
C (LVDS)*
PR50B
2
RDQ54
C (LVDS)*
J24
PR37A
2
RDQ41
T (LVDS)*
PR50A
2
RDQ54
T (LVDS)*
C
Dual Function
Ball/Pad
Function
Bank
GNDIO2
-
T
PR53A
2
RDQ54
T
C (LVDS)*
PR52B
2
RDQ54
C (LVDS)*
2
RDQ54
T (LVDS)*
2
RDQ54
C
Differential
GND
GNDIO2
-
GNDIO2
-
VCCIO
VCCIO2
2
VCCIO2
2
-
Dual Function
Differential
L20
VCCPLL
2
NC
GND
GNDIO2
-
GNDIO2
-
J26
PR26B
2
RUM0_SPLLC_FB_A/RDQ24
C
PR39B
2
RUM0_SPLLC_FB_A/RDQ37
J25
PR26A
2
RUM0_SPLLT_FB_A/RDQ24
T
PR39A
2
RUM0_SPLLT_FB_A/RDQ37
T
J23
PR25B
2
RUM0_SPLLC_IN_A/RDQ24
C
PR38B
2
RUM0_SPLLC_IN_A/RDQ37
C
K23
PR25A
2
RUM0_SPLLT_IN_A/RDQ24
T
PR38A
2
RUM0_SPLLT_IN_A/RDQ37
T
VCCIO
VCCIO2
2
VCCIO2
2
H26
PR24B
2
RDQ24
C (LVDS)*
PR37B
2
RDQ37
C (LVDS)*
H25
PR24A
2
RDQS24***
T (LVDS)*
PR37A
2
RDQS37***
T (LVDS)*
H24
PR23B
2
RDQ24
C
PR36B
2
RDQ37
C
GND
GNDIO2
-
GNDIO2
RDQ37
T
RDQ29
C
H23
PR23A
2
VCCIO
VCCIO2
2
G26
PR19B
2
GND
GNDIO2
-
G25
PR19A
F26
RDQ24
T
PR36A
2
VCCIO2
2
PR32B
2
RDQ16
C
GNDIO2
-
2
RDQ16
T
PR32A
2
RDQ29
T
PR18B
2
RDQ16
C (LVDS)*
PR31B
2
RDQ29
C (LVDS)*
F25
PR18A
2
RDQ16
T (LVDS)*
PR31A
2
RDQ29
T (LVDS)*
K20
PR17B
2
RDQ16
C
PR30B
2
RDQ29
C
VCCIO
VCCIO2
2
VCCIO2
2
L19
PR17A
2
RDQ16
T
PR30A
2
RDQ29
T
E26
PR16B
2
RDQ16
C (LVDS)*
PR29B
2
RDQ29
C (LVDS)*
RDQS16
T (LVDS)*
RDQS29
T (LVDS)*
C
E25
PR16A
2
GND
GNDIO2
-
PR29A
2
GNDIO2
-
J22
PR15B
2
RDQ16
C
PR28B
2
RDQ29
H22
PR15A
2
RDQ16
T
PR28A
2
RDQ29
T
G24
PR14B
2
RDQ16
C (LVDS)*
PR27B
2
RDQ29
C (LVDS)*
RDQ16
T (LVDS)*
RDQ29
T (LVDS)*
C
G23
PR14A
2
VCCIO
VCCIO2
2
PR27A
2
VCCIO2
2
K19
PR13B
2
RDQ16
C
PR26B
2
RDQ29
J19
PR13A
2
D26
PR12B
2
RDQ16
T
PR26A
2
RDQ29
T
RDQ16
C (LVDS)*
PR25B
2
RDQ29
C (LVDS)*
C26
PR12A
F22
PR11B
2
RDQ16
T (LVDS)*
PR25A
2
RDQ29
T (LVDS)*
2
RDQ8
C
PR24B
2
RDQ21
E24
C
PR11A
2
RDQ8
T
PR24A
2
RDQ21
GND
T
GNDIO2
-
GNDIO2
-
4-100
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
LFE2-70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
D25
PR10B
2
RDQ8
Bank
Dual Function
Differential
C (LVDS)*
PR23B
2
RDQ21
C (LVDS)*
C25
PR10A
2
RDQ8
T (LVDS)*
PR23A
D24
PR9B
2
RDQ8
C
PR22B
2
RDQ21
T (LVDS)*
2
RDQ21
B25
PR9A
2
RDQ8
T
PR22A
2
C
RDQ21
VCCIO
VCCIO2
2
VCCIO2
2
T
H21
PR8B
2
RDQ8
C (LVDS)*
PR21B
2
RDQ21
C (LVDS)*
G22
PR8A
2
RDQS8
T (LVDS)*
PR21A
2
RDQS21
T (LVDS)*
B24
PR7B
2
RDQ8
C
PR20B
2
RDQ21
C
GND
GNDIO2
-
GNDIO2
-
C24
PR7A
2
RDQ8
T
PR20A
2
RDQ21
T
D23
PR6B
2
RDQ8
C (LVDS)*
PR19B
2
RDQ21
C (LVDS)*
C23
PR6A
2
RDQ8
T (LVDS)*
PR19A
2
RDQ21
T (LVDS)*
G21
PR5B
2
RDQ8
C
PR18B
2
RDQ21
C
VCCIO
VCCIO2
2
VCCIO2
2
RDQ21
T
VREF2_2
C (LVDS)*
H20
PR5A
2
GND
GNDIO2
-
RDQ8
T
E22
PR2B
2
VREF2_2
C (LVDS)*
PR18A
2
GNDIO2
-
PR2B
2
F21
PR2A
2
VREF1_2
T (LVDS)*
PR2A
2
VREF1_2
T (LVDS)*
E23
PT82B
1
VREF2_1
C
PT100B
1
VREF2_1
C
GND
GNDIO1
-
GNDIO1
-
D22
PT82A
1
G20
PT81B
1
VREF1_1
T
PT100A
1
C
PT99B
1
VREF1_1
T
C
J18
PT81A
1
T
PT99A
1
T
F20
PT80B
1
C
PT98B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
H19
PT80A
1
T
PT98A
1
T
A24
PT79B
1
C
PT97B
1
C
A23
PT79A
1
T
PT97A
1
T
E21
PT78B
1
C
PT96B
1
C
F19
PT78A
1
T
PT96A
1
T
C22
PT77B
1
C
PT95B
1
C
GND
GNDIO1
-
E20
PT77A
1
T
B22
PT76B
1
C
VCCIO
VCCIO1
1
GNDIO1
-
PT95A
1
T
PT94B
1
C
VCCIO1
1
B23
PT76A
1
T
PT94A
1
T
C20
PT75B
1
C
PT93B
1
C
D20
PT75A
1
T
PT93A
1
T
A22
PT74B
1
C
PT92B
1
C
A21
PT74A
1
T
PT92A
1
T
GND
GNDIO1
-
GNDIO1
-
E19
PT71B
1
C
PT85B
1
C
C19
PT71A
1
T
PT85A
1
T
VCCIO
VCCIO1
1
VCCIO1
1
B21
PT70B
1
C
PT79B
1
B20
PT70A
1
T
PT79A
1
T
D19
PT69B
1
C
PT78B
1
C
4-101
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
LFE2-70E/SE
Ball
Number
Ball/Pad
Function
Bank
B19
PT69A
1
GND
GNDIO1
-
GNDIO1
-
G17
PT68B
1
C
PT77B
1
E18
PT68A
1
T
PT77A
1
T
G19
PT67B
1
C
PT76B
1
C
T
T
F17
PT67A
1
VCCIO
VCCIO1
1
A20
PT66B
1
A19
PT66A
1
Dual Function
Differential
Ball/Pad
Function
Bank
T
PT78A
1
Dual Function
Differential
T
C
PT76A
1
VCCIO1
1
C
PT75B
1
C
T
PT75A
1
T
C
E17
PT65B
1
C
PT74B
1
D18
PT65A
1
T
PT74A
1
T
B18
PT64B
1
C
PT73B
1
C
GND
GNDIO1
-
GNDIO1
-
A18
PT64A
1
T
PT73A
1
T
E16
PT63B
1
C
PT72B
1
C
G16
PT63A
1
T
PT72A
1
T
F16
PT62B
1
C
PT71B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
H18
PT62A
1
T
PT71A
1
T
A17
PT61B
1
C
PT70B
1
C
B17
PT61A
1
T
PT70A
1
T
C18
PT60B
1
C
PT69B
1
C
B16
PT60A
1
T
PT69A
1
T
C17
PT59B
1
C
PT68B
1
C
GND
GNDIO1
-
GNDIO1
-
D17
PT59A
1
T
PT68A
1
T
E15
PT58B
1
C
PT67B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
G15
PT58A
1
T
PT67A
1
T
A16
PT57B
1
C
PT66B
1
C
B15
PT57A
1
T
PT66A
1
T
D15
PT56B
1
C
PT65B
1
C
F15
PT56A
1
T
PT65A
1
T
A14
PT55B
1
C
PT64B
1
C
B14
PT55A
1
T
PT64A
1
T
GND
GNDIO1
-
GNDIO1
-
C15
PT54B
1
C
PT63B
1
A15
PT54A
1
T
PT63A
1
T
A13
PT53B
1
C
PT62B
1
C
T
T
B13
PT53A
1
VCCIO
VCCIO1
1
H17
PT52B
1
H15
PT52A
1
D13
PT51B
C
PT62A
1
VCCIO1
1
C
PT61B
1
T
PT61A
1
T
1
C
PT60B
1
C
T
T
C14
PT51A
1
GND
GNDIO1
-
G14
PT50B
1
C
4-102
PT60A
1
GNDIO1
-
PT59B
1
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
E14
PT50A
1
A12
PT49B
B12
PT49A
VCCIO
VCCIO1
1
LFE2-70E/SE
Differential
Ball/Pad
Function
Bank
T
PT59A
1
T
1
C
PT58B
1
C
1
T
PT58A
1
T
VCCIO1
1
Dual Function
Dual Function
Differential
F14
PT48B
1
PCLKC1_0
C
PT57B
1
PCLKC1_0
C
D14
PT48A
1
PCLKT1_0
T
PT57A
1
PCLKT1_0
T
H16
XRES
1
XRES
1
PT55B
0
PCLKC0_0
C
GNDIO0
-
H14
PT46B
0
GND
GNDIO0
-
H13
PT46A
0
A11
PT45B
0
PCLKC0_0
PCLKT0_0
C
T
PT55A
0
C
PT54B
0
PCLKT0_0
T
C
B11
PT45A
0
T
PT54A
0
T
C13
PT44B
0
C
PT53B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
E13
PT44A
0
T
PT53A
0
T
D12
PT43B
0
C
PT52B
0
C
F13
PT43A
0
T
PT52A
0
T
A10
PT42B
0
C
PT51B
0
C
B10
PT42A
0
T
PT51A
0
T
C12
PT41B
0
C
PT50B
0
C
GND
GNDIO0
-
GNDIO0
-
C10
PT41A
0
T
PT50A
0
T
G13
PT40B
0
C
PT49B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
H12
PT40A
0
T
PT49A
0
T
A9
PT39B
0
C
PT48B
0
C
B9
PT39A
0
T
PT48A
0
T
E12
PT38B
0
C
PT47B
0
C
G12
PT38A
0
T
PT47A
0
T
A8
PT37B
0
C
PT46B
0
C
T
T
B8
PT37A
0
GND
GNDIO0
-
PT46A
0
GNDIO0
-
E11
PT36B
0
C
PT45B
0
C9
PT36A
A7
PT35B
0
T
PT45A
0
T
0
C
PT44B
0
C
B7
VCCIO
PT35A
0
T
PT44A
0
T
VCCIO0
0
VCCIO0
0
C
F12
PT34B
0
C
PT43B
0
D10
PT34A
0
T
PT43A
0
T
H11
PT33B
0
C
PT42B
0
C
G11
PT33A
0
T
PT42A
0
T
GND
GNDIO0
-
GNDIO0
-
A6
PT32B
0
C
PT41B
0
B6
PT32A
0
T
PT41A
0
T
D8
PT31B
0
C
PT40B
0
C
C8
PT31A
0
T
PT40A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
4-103
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
F11
PT30B
0
E10
PT30A
E9
PT29B
LFE2-70E/SE
Differential
Ball/Pad
Function
Bank
C
PT39B
0
0
T
PT39A
0
T
0
C
PT38B
0
C
Dual Function
Dual Function
Differential
C
D9
PT29A
0
T
PT38A
0
T
G10
PT28B
0
C
PT37B
0
C
GND
GNDIO0
-
GNDIO0
-
H10
PT28A
0
T
PT37A
0
T
A5
PT27B
0
C
PT36B
0
C
B5
PT27A
0
T
PT36A
0
T
C
C
C7
PT26B
0
VCCIO
VCCIO0
0
D7
PT26A
0
E8
PT25B
0
F10
PT25A
0
F8
PT24B
0
H9
PT24A
0
C5
PT23B
0
GND
GNDIO0
-
D5
PT23A
0
B4
PT22B
0
VCCIO
VCCIO0
GND
GNDIO0
VCCIO
VCCIO0
GND
VCCIO
PT35B
0
VCCIO0
0
T
PT35A
0
T
C
PT34B
0
C
T
PT34A
0
T
C
PT33B
0
C
T
PT33A
0
T
C
PT32B
0
C
GNDIO0
-
PT32A
0
PT31B
0
0
VCCIO0
0
-
GNDIO0
-
0
VCCIO0
0
GNDIO0
-
GNDIO0
-
VCCIO0
0
VCCIO0
0
T
C4
PT10B
0
GND
GNDIO0
-
C
C3
PT10A
0
A4
PT9B
0
A3
PT9A
0
B3
PT8B
0
VCCIO
VCCIO0
0
B2
PT8A
0
T
D4
PT7B
0
C
D3
PT7A
0
T
C2
PT6B
0
C
T
PT10B
0
GNDIO0
-
C
T
PT10A
0
T
C
PT9B
0
C
T
PT9A
0
T
C
PT8B
0
C
VCCIO0
0
PT8A
0
T
PT7B
0
C
PT7A
0
T
PT6B
0
C
C1
PT6A
0
T
PT6A
0
T
G8
PT5B
0
C
PT5B
0
C
GND
GNDIO0
-
GNDIO0
-
G7
PT5A
0
T
PT5A
0
T
E7
PT4B
0
C
PT4B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
F7
PT4A
0
T
PT4A
0
T
E6
PT3B
0
C
PT3B
0
C
E5
PT3A
0
T
PT3A
0
G6
PT2B
0
VREF2_0
C
PT2B
0
VREF2_0
C
G5
PT2A
0
VREF1_0
T
PT2A
0
VREF1_0
T
4-104
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
L12
VCC
L13
L14
LFE2-70E/SE
Ball/Pad
Function
Bank
-
VCC
-
VCC
-
VCC
-
VCC
-
VCC
-
L15
VCC
-
VCC
-
M11
VCC
-
VCC
-
M12
VCC
-
VCC
-
M15
VCC
-
VCC
-
M16
VCC
-
VCC
-
N11
VCC
-
VCC
-
N16
VCC
-
VCC
-
P11
VCC
-
VCC
-
P16
VCC
-
VCC
-
R11
VCC
-
VCC
-
R12
VCC
-
VCC
-
R15
VCC
-
VCC
-
R16
VCC
-
VCC
-
T12
VCC
-
VCC
-
T13
VCC
-
VCC
-
T14
VCC
-
VCC
-
T15
VCC
-
VCC
-
D11
VCCIO0
0
VCCIO0
0
Dual Function
Differential
D6
VCCIO0
0
VCCIO0
0
G9
VCCIO0
0
VCCIO0
0
K12
VCCIO0
0
VCCIO0
0
J12
VCCIO0
0
VCCIO0
0
D16
VCCIO1
1
VCCIO1
1
D21
VCCIO1
1
VCCIO1
1
G18
VCCIO1
1
VCCIO1
1
J15
VCCIO1
1
VCCIO1
1
K15
VCCIO1
1
VCCIO1
1
F23
VCCIO2
2
VCCIO2
2
J20
VCCIO2
2
VCCIO2
2
L23
VCCIO2
2
VCCIO2
2
M17
VCCIO2
2
VCCIO2
2
M18
VCCIO2
2
VCCIO2
2
AA23
VCCIO3
3
VCCIO3
3
R17
VCCIO3
3
VCCIO3
3
R18
VCCIO3
3
VCCIO3
3
T23
VCCIO3
3
VCCIO3
3
V20
VCCIO3
3
VCCIO3
3
AC16
VCCIO4
4
VCCIO4
4
AC21
VCCIO4
4
VCCIO4
4
U15
VCCIO4
4
VCCIO4
4
V15
VCCIO4
4
VCCIO4
4
Y18
VCCIO4
4
VCCIO4
4
AC11
VCCIO5
5
VCCIO5
5
AC6
VCCIO5
5
VCCIO5
5
4-105
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
U12
VCCIO5
V12
Y9
LFE2-70E/SE
Ball/Pad
Function
Bank
5
VCCIO5
5
VCCIO5
5
VCCIO5
5
VCCIO5
5
VCCIO5
5
AA4
VCCIO6
6
VCCIO6
6
R10
VCCIO6
6
VCCIO6
6
R9
VCCIO6
6
VCCIO6
6
6
Dual Function
Differential
T4
VCCIO6
6
VCCIO6
V7
VCCIO6
6
VCCIO6
6
F4
VCCIO7
7
VCCIO7
7
J7
VCCIO7
7
VCCIO7
7
L4
VCCIO7
7
VCCIO7
7
M10
VCCIO7
7
VCCIO7
7
M9
VCCIO7
7
VCCIO7
7
AE25
VCCIO8
8
VCCIO8
8
V18
VCCIO8
8
VCCIO8
8
J10
VCCAUX
-
VCCAUX
-
J11
VCCAUX
-
VCCAUX
-
J16
VCCAUX
-
VCCAUX
-
J17
VCCAUX
-
VCCAUX
-
K18
VCCAUX
-
VCCAUX
-
K9
VCCAUX
-
VCCAUX
-
L18
VCCAUX
-
VCCAUX
-
L9
VCCAUX
-
VCCAUX
-
T18
VCCAUX
-
VCCAUX
-
T9
VCCAUX
-
VCCAUX
-
U18
VCCAUX
-
VCCAUX
-
U9
VCCAUX
-
VCCAUX
-
V10
VCCAUX
-
VCCAUX
-
V11
VCCAUX
-
VCCAUX
-
V16
VCCAUX
-
VCCAUX
-
V17
VCCAUX
-
VCCAUX
-
A2
GND
-
GND
-
A25
GND
-
GND
-
AA18
GND
-
GND
-
AA24
GND
-
GND
-
AA3
GND
-
GND
-
AA9
GND
-
GND
-
AD11
GND
-
GND
-
AD16
GND
-
GND
-
AD21
GND
-
GND
-
AD6
GND
-
GND
-
AE1
GND
-
GND
AE26
GND
-
GND
-
AF2
GND
-
GND
-
AF25
GND
-
GND
-
B1
GND
-
GND
-
B26
GND
-
GND
-
4-106
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
C11
GND
C16
C21
LFE2-70E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
C6
GND
-
GND
-
F18
GND
-
GND
-
F24
GND
-
GND
-
F3
GND
-
GND
-
F9
GND
-
GND
-
J13
GND
-
GND
-
J14
GND
-
GND
-
J21
GND
-
GND
-
J6
GND
-
GND
-
K10
GND
-
GND
-
K11
GND
-
GND
-
K13
GND
-
GND
-
K14
GND
-
GND
-
K16
GND
-
GND
-
K17
GND
-
GND
-
L10
GND
-
GND
-
L11
GND
-
GND
-
L16
GND
-
GND
-
L17
GND
-
GND
-
L24
GND
-
GND
-
L3
GND
-
GND
-
M13
GND
-
GND
-
Dual Function
Differential
M14
GND
-
GND
-
N10
GND
-
GND
-
N12
GND
-
GND
-
N13
GND
-
GND
-
N14
GND
-
GND
-
N15
GND
-
GND
-
N17
GND
-
GND
-
P10
GND
-
GND
-
P12
GND
-
GND
-
P13
GND
-
GND
-
P14
GND
-
GND
-
P15
GND
-
GND
-
P17
GND
-
GND
-
R13
GND
-
GND
-
R14
GND
-
GND
-
T10
GND
-
GND
-
T11
GND
-
GND
-
T16
GND
-
GND
-
T17
GND
-
GND
-
T24
GND
-
GND
-
T3
GND
-
GND
-
U10
GND
-
GND
-
4-107
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-50E/SE and LFE2-70E/SE Logic Signal Connections: 672 fpBGA
LFE2-50E/SE
Ball
Number
Ball/Pad
Function
Bank
U11
GND
U13
U14
LFE2-70E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
U16
GND
-
GND
-
U17
GND
-
GND
-
V13
GND
-
GND
-
V14
GND
-
GND
-
V21
GND
-
GND
-
V6
GND
-
GND
-
Dual Function
Differential
M3
NC
-
NC
-
N6
NC
-
NC
-
P24
NC
-
NC
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
***Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-108
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
VCCIO
VCCIO7
7
Dual Function
Differential
F4
PL2A
7
VREF2_7
T (LVDS)*
F3
PL2B
7
VREF1_7
C (LVDS)*
H4
PL3A
7
T
G5
PL3B
7
C
GND
GNDIO7
-
D2
PL4A
7
T (LVDS)*
D1
PL4B
7
C (LVDS)*
E2
PL5A
7
T
VCCIO
VCCIO7
7
E1
PL5B
7
C
GND
GNDIO7
-
VCCIO
VCCIO7
7
F1
PL14A
7
LUM1_SPLLT_IN_A/LDQ12
T (LVDS)*
F2
PL14B
7
LUM1_SPLLC_IN_A/LDQ12
C (LVDS)*
G1
PL15A
7
LUM1_SPLLT_FB_A/LDQ12
T
G2
PL15B
7
LUM1_SPLLC_FB_A/LDQ12
C
GND
GNDIO7
-
H8
PL18A
7
LDQ21
T
LDQ21
C
H6
PL18B
7
VCCIO
VCCIO7
7
G4
PL19A
7
LDQ21
T (LVDS)*
G3
PL19B
7
LDQ21
C (LVDS)*
H7
PL20A
7
LDQ21
T
H5
PL20B
7
LDQ21
C
GND
GNDIO7
-
H2
PL21A
7
LDQS21
T (LVDS)*
H1
PL21B
7
LDQ21
C (LVDS)*
J6
PL22A
7
LDQ21
T
VCCIO
VCCIO7
7
J8
PL22B
7
LDQ21
C
J2
PL23A
7
LDQ21
T (LVDS)*
J1
PL23B
7
LDQ21
C (LVDS)*
LDQ21
T
J5
PL24A
7
GND
GNDIO7
-
J7
PL24B
7
LDQ21
C
J4
PL25A
7
LDQ29
T (LVDS)*
J3
PL25B
7
LDQ29
C (LVDS)*
K6
PL26A
7
LDQ29
T
LDQ29
C
LDQ29
T (LVDS)*
K8
PL26B
7
VCCIO
VCCIO7
7
K2
PL27A
7
4-109
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
K1
PL27B
7
LDQ29
C (LVDS)*
K5
PL28A
7
LDQ29
T
LDQ29
C
K7
PL28B
7
GND
GNDIO7
-
K4
PL29A
7
LDQS29
T (LVDS)*
K3
PL29B
7
LDQ29
C (LVDS)*
LDQ29
T
L8
PL30A
7
VCCIO
VCCIO7
7
L6
PL30B
7
LDQ29
C
L2
PL31A
7
LDQ29
T (LVDS)*
L1
PL31B
7
LDQ29
C (LVDS)*
L7
PL32A
7
LDQ29
T
GND
GNDIO7
-
L5
PL32B
7
LDQ29
C
L4
PL33A
7
LDQ37
T (LVDS)*
L3
PL33B
7
LDQ37
C (LVDS)*
M8
PL34A
7
LDQ37
T
M6
PL34B
7
LDQ37
C
VCCIO
VCCIO7
7
M2
PL35A
7
LDQ37
T (LVDS)*
M1
PL35B
7
LDQ37
C (LVDS)*
M7
PL36A
7
LDQ37
T
LDQ37
C
M5
PL36B
7
GND
GNDIO7
-
M4
PL37A
7
LDQS37
T (LVDS)*
M3
PL37B
7
LDQ37
C (LVDS)*
LUM0_SPLLT_IN_A/LDQ37
T
N6
PL38A
7
VCCIO
VCCIO7
7
N8
PL38B
7
LUM0_SPLLC_IN_A/LDQ37
C
N5
PL39A
7
LUM0_SPLLT_FB_A/LDQ37
T
LUM0_SPLLC_FB_A/LDQ37
C
N7
PL39B
7
GND
GNDIO7
-
VCCIO
VCCIO7
7
T9
PL50A
7
LDQ54
R9
PL51A
7
LDQ54
T
P7
PL51B
7
LDQ54
C
VCCIO
VCCIO7
7
N2
PL52A
7
LDQ54
T (LVDS)*
N1
PL52B
7
LDQ54
C (LVDS)*
P6
PL53A
7
LDQ54
T
LDQ54
C
LDQS54
T (LVDS)*
P5
PL53B
7
GND
GNDIO7
-
P4
PL54A
7
4-110
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
P3
PL54B
7
LDQ54
C (LVDS)*
R6
PL55A
7
LDQ54
T
VCCIO
VCCIO7
7
R8
PL55B
7
LDQ54
C
P2
PL56A
7
LDQ54
T (LVDS)*
P1
PL56B
7
LDQ54
C (LVDS)*
PCLKT7_0/LDQ54
T
R5
PL57A
7
GND
GNDIO7
-
R7
PL57B
7
PCLKC7_0/LDQ54
C
R4
PL59A
6
PCLKT6_0/LDQ63
T (LVDS)*
R3
PL59B
6
PCLKC6_0/LDQ63
C (LVDS)*
T5
PL60A
6
VREF2_6/LDQ63
T
T7
PL60B
6
VREF1_6/LDQ63
C
T3
PL61A
6
LDQ63
T (LVDS)*
VCCIO
VCCIO6
6
T4
PL61B
6
LDQ63
C (LVDS)*
T6
PL62A
6
LDQ63
T
T8
PL62B
6
LDQ63
C
T2
PL63A
6
LDQS63
T (LVDS)*
GND
GNDIO6
-
T1
PL63B
6
LDQ63
C (LVDS)*
U7
PL64A
6
LDQ63
T
LDQ63
C
U5
PL64B
6
VCCIO
VCCIO6
6
U4
PL65A
6
LDQ63
T (LVDS)*
U3
PL65B
6
LDQ63
C (LVDS)*
U8
PL66A
6
LDQ63
T
U6
PL66B
6
LDQ63
C
GND
GNDIO6
-
U2
PL67A
6
LDQ71
T (LVDS)*
U1
PL67B
6
LDQ71
C (LVDS)*
V7
PL68A
6
LDQ71
T
LDQ71
C
V5
PL68B
6
VCCIO
VCCIO6
6
V2
PL69A
6
LDQ71
T (LVDS)*
V1
PL69B
6
LDQ71
C (LVDS)*
V8
PL70A
6
LDQ71
T
V6
PL70B
6
LDQ71
C
GND
GNDIO6
-
W1
PL71A
6
LDQS71
T (LVDS)*
W2
PL71B
6
LDQ71
C (LVDS)*
W5
PL72A
6
LDQ71
T
VCCIO
VCCIO6
6
4-111
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
W7
PL72B
6
LDQ71
C
W4
PL73A
6
LLM0_GDLLT_IN_A**/LDQ71
T (LVDS)*
W3
PL73B
6
LLM0_GDLLC_IN_A**/LDQ71
C (LVDS)*
W6
PL74A
6
LLM0_GDLLT_FB_A/LDQ71
T
GND
GNDIO6
-
W8
PL74B
6
LLM0_GDLLC_FB_D/LDQ71
C
Y8
LLM0_PLLCAP
6
Y1
PL76A
6
LLM0_GPLLT_IN_A**/LDQ80
T (LVDS)*
Y2
PL76B
6
LLM0_GPLLC_IN_A**/LDQ80
C (LVDS)*
Y5
PL77A
6
LLM0_GPLLT_FB_A/LDQ80
T
Y6
PL77B
6
LLM0_GPLLC_FB_A/LDQ80
C
Y4
PL78A
6
LDQ80
T (LVDS)*
VCCIO
VCCIO6
6
Y3
PL78B
6
LDQ80
C (LVDS)*
AA6
PL79A
6
LDQ80
T
AA8
PL79B
6
LDQ80
C
LDQS80
T (LVDS)*
AA2
PL80A
6
GND
GNDIO6
-
AA1
PL80B
6
LDQ80
C (LVDS)*
AA7
PL81A
6
LDQ80
T
LDQ80
C
AA5
PL81B
6
VCCIO
VCCIO6
6
AA4
PL82A
6
LDQ80
T (LVDS)*
AA3
PL82B
6
LDQ80
C (LVDS)*
AB7
PL83A
6
LDQ80
T
AB5
PL83B
6
LDQ80
C
GND
GNDIO6
-
AB2
PL84A
6
LDQ88
T (LVDS)*
AB1
PL84B
6
LDQ88
C (LVDS)*
AB8
PL85A
6
LDQ88
T
LDQ88
C
AB6
PL85B
6
VCCIO
VCCIO6
6
AB4
PL86A
6
LDQ88
T (LVDS)*
AB3
PL86B
6
LDQ88
C (LVDS)*
AC7
PL87A
6
LDQ88
T
AC5
PL87B
6
LDQ88
C
GND
GNDIO6
-
AC2
PL88A
6
LDQS88
T (LVDS)*
AC1
PL88B
6
LDQ88
C (LVDS)*
AC6
PL89A
6
LDQ88
T
VCCIO
VCCIO6
6
AD6
PL89B
6
LDQ88
C
AD1
PL90A
6
LDQ88
T (LVDS)*
4-112
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AD2
PL90B
6
LDQ88
C (LVDS)*
AD7
PL91A
6
LDQ88
T
GND
GNDIO6
-
AB9
PL91B
6
LDQ88
C
AD5
TCK
-
AE7
TDI
-
AD4
TMS
-
AA9
TDO
-
AD3
VCCJ
-
AC8
PB2A
5
VREF2_5/BDQ6
T
AE8
PB2B
5
VREF1_5/BDQ6
C
AD8
PB3A
5
BDQ6
T
AF8
PB3B
5
BDQ6
C
AG7
PB4A
5
BDQ6
T
VCCIO
VCCIO5
5
AH7
PB4B
5
BDQ6
C
AC9
PB5A
5
BDQ6
T
AE9
PB5B
5
BDQ6
C
BDQS6
T
AD9
PB6A
5
GND
GNDIO5
-
AF9
PB6B
5
BDQ6
C
AB10
PB7A
5
BDQ6
T
AA10
PB7B
5
BDQ6
C
AJ7
PB8A
5
BDQ6
T
VCCIO
VCCIO5
5
AK7
PB8B
5
BDQ6
C
AC10
PB9A
5
BDQ6
T
AE10
PB9B
5
BDQ6
C
BDQ6
T
AJ8
PB10A
5
GND
GNDIO5
-
AK8
PB10B
5
BDQ6
C
AF6
PB11A
5
BDQ15
T
AF7
PB11B
5
BDQ15
C
AG5
PB12A
5
BDQ15
T
AH5
PB12B
5
BDQ15
C
AG6
PB13A
5
BDQ15
T
BDQ15
C
AH6
PB13B
5
VCCIO
VCCIO5
5
AJ4
PB14A
5
BDQ15
T
AK4
PB14B
5
BDQ15
C
GND
GNDIO5
-
AJ5
PB15A
5
BDQS15
T
AK5
PB15B
5
BDQ15
C
4-113
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AJ6
PB16A
5
BDQ15
T
AK6
PB16B
5
BDQ15
C
VCCIO
VCCIO5
5
GND
GNDIO5
-
AD10
PB29A
5
BDQ33
T
AF10
PB29B
5
BDQ33
C
AC11
PB30A
5
BDQ33
T
AD11
PB30B
5
BDQ33
C
AG9
PB31A
5
BDQ33
T
AH9
PB31B
5
BDQ33
C
VCCIO
VCCIO5
99
AE11
PB32A
5
BDQ33
T
AG10
PB32B
5
BDQ33
C
GND
GNDIO5
-
AJ9
PB33A
5
BDQS33
T
AK9
PB33B
5
BDQ33
C
AF11
PB34A
5
BDQ33
T
AH10
PB34B
5
BDQ33
C
AC12
PB35A
5
BDQ33
T
AE12
PB35B
5
BDQ33
C
VCCIO
VCCIO5
5
AD12
PB36A
5
BDQ33
T
AF12
PB36B
5
BDQ33
C
AJ10
PB37A
5
BDQ33
T
AK10
PB37B
5
BDQ33
C
GND
GNDIO5
-
AG11
PB38A
5
BDQ42
T
AH11
PB38B
5
BDQ42
C
AE13
PB39A
5
BDQ42
T
AC13
PB39B
5
BDQ42
C
AF13
PB40A
5
BDQ42
T
VCCIO
VCCIO5
5
AD13
PB40B
5
BDQ42
C
AJ11
PB41A
5
BDQ42
T
AK11
PB41B
5
BDQ42
C
AD14
PB42A
5
BDQS42
T
GND
GNDIO5
-
AC14
PB42B
5
BDQ42
C
AG12
PB43A
5
BDQ42
T
AE14
PB43B
5
BDQ42
C
BDQ42
T
BDQ42
C
AJ12
PB44A
5
VCCIO
VCCIO5
5
AK12
PB44B
5
4-114
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AH12
PB45A
5
BDQ42
T
AF14
PB45B
5
BDQ42
C
AJ13
PB46A
5
BDQ42
T
GND
GNDIO5
-
AK13
PB46B
5
BDQ42
C
AB15
PB47A
5
BDQ51
T
AD15
PB47B
5
BDQ51
C
AE15
PB48A
5
BDQ51
T
AF15
PB48B
5
BDQ51
C
AG15
PB49A
5
BDQ51
T
BDQ51
C
AG14
PB49B
5
VCCIO
VCCIO5
5
AH15
PB50A
5
BDQ51
T
AH14
PB50B
5
BDQ51
C
GND
GNDIO5
-
AJ14
PB51A
5
BDQS51
T
AK14
PB51B
5
BDQ51
C
AD16
PB52A
5
BDQ51
T
AF16
PB52B
5
BDQ51
C
AJ15
PB53A
5
PCLKT5_0/BDQ51
T
PCLKC5_0/BDQ51
C
PCLKT4_0/BDQ60
T
PCLKC4_0/BDQ60
C
AK15
PB53B
5
VCCIO
VCCIO5
5
GND
GNDIO5
-
AE16
PB58A
4
VCCIO
VCCIO4
4
AC15
PB58B
4
AJ16
PB59A
4
BDQ60
T
AK16
PB59B
4
BDQ60
C
AC16
PB60A
4
BDQS60
T
GND
GNDIO4
-
AB16
PB60B
4
BDQ60
C
AH17
PB61A
4
BDQ60
T
AG17
PB61B
4
BDQ60
C
AF17
PB62A
4
BDQ60
T
VCCIO
VCCIO4
4
AD17
PB62B
4
BDQ60
C
AE17
PB63A
4
BDQ60
T
AC17
PB63B
4
BDQ60
C
AJ17
PB64A
4
BDQ60
T
GND
GNDIO4
-
AK17
PB64B
4
BDQ60
C
AK18
PB65A
4
BDQ69
T
AJ18
PB65B
4
BDQ69
C
4-115
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AD18
PB66A
4
BDQ69
T
AF18
PB66B
4
BDQ69
C
AC18
PB67A
4
BDQ69
T
AE18
PB67B
4
BDQ69
C
VCCIO
VCCIO4
4
AG19
PB68A
4
BDQ69
T
AH19
PB68B
4
BDQ69
C
GND
GNDIO4
-
AE19
PB69A
4
BDQS69
T
AF19
PB69B
4
BDQ69
C
AC19
PB70A
4
BDQ69
T
AD19
PB70B
4
BDQ69
C
AJ19
PB71A
4
BDQ69
T
AK19
PB71B
4
BDQ69
C
VCCIO
VCCIO4
4
AF20
PB72A
4
BDQ69
T
AH20
PB72B
4
BDQ69
C
AE20
PB73A
4
BDQ69
T
AG20
PB73B
4
BDQ69
C
GND
GNDIO4
-
AD20
PB74A
4
BDQ78
T
AC20
PB74B
4
BDQ78
C
AH21
PB75A
4
BDQ78
T
AF21
PB75B
4
BDQ78
C
BDQ78
T
AJ20
PB76A
4
VCCIO
VCCIO4
4
AK20
PB76B
4
BDQ78
C
AG21
PB77A
4
BDQ78
T
AE21
PB77B
4
BDQ78
C
AD21
PB78A
4
BDQS78
T
GND
GNDIO4
-
AC21
PB78B
4
BDQ78
C
AD22
PB79A
4
BDQ78
T
AB21
PB79B
4
BDQ78
C
AJ21
PB80A
4
BDQ78
T
VCCIO
VCCIO4
4
AK21
PB80B
4
BDQ78
C
GND
GNDIO4
-
VCCIO
VCCIO4
4
AJ25
PB87A
4
BDQS87***
T
AK24
PB87B
4
BDQ87
C
AJ24
PB88A
4
BDQ87
T
AK25
PB88B
4
BDQ87
C
4-116
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AH24
PB89A
4
BDQ87
T
AH25
PB89B
4
BDQ87
C
VCCIO
VCCIO4
4
AJ26
PB90A
4
BDQ87
T
AK26
PB90B
4
BDQ87
C
AF25
PB91A
4
BDQ87
T
AG25
PB91B
4
BDQ87
C
GND
GNDIO4
-
AK22
PB92A
4
BDQ96
T
AJ22
PB92B
4
BDQ96
C
AE22
PB93A
4
BDQ96
T
AF22
PB93B
4
BDQ96
C
BDQ96
T
AG22
PB94A
4
VCCIO
VCCIO4
4
AH22
PB94B
4
BDQ96
C
AG24
PB95A
4
BDQ96
T
C
AG23
PB95B
4
BDQ96
AE23
PB96A
4
BDQS96
GND
GNDIO4
-
AC22
PB97A
4
BDQ96
BDQ96
T
AJ23
PB98A
4
VCCIO
VCCIO4
4
AK23
PB98B
4
BDQ96
C
AD24
PB99A
4
BDQ96
T
AF24
PB99B
4
BDQ96
C
AC23
PB100A
4
VREF2_4/BDQ96
T
VREF1_4/BDQ96
C
GND
GNDIO4
-
AE24
PB100B
4
AE25
CFG2
8
AB22
CFG1
8
AE26
CFG0
8
AA22
PROGRAMN
8
AD25
CCLK
8
AD26
INITN
8
AC24
DONE
8
GND
GNDIO4
-
AC25
PR90B
8
WRITEN
C
AE27
PR90A
8
CS1N
T
AC26
PR89B
8
CSN
C
AE28
PR89A
8
D0/SPIFASTN
T
VCCIO
VCCIO8
8
AD27
PR88B
8
D1
C
AD28
PR88A
8
D2
T
4-117
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AB24
PR87B
8
D3
C
GND
GNDIO4
-
AB23
PR87A
8
D4
T
AB25
PR86B
8
D5
C
AB26
PR86A
8
D6
T
AC27
PR85B
8
D7
C
VCCIO
VCCIO8
8
AB27
PR85A
8
DI/CSSPI0N
T
AD29
PR84B
8
DOUT/CSON
C
AD30
PR84A
8
BUSY/SISPI
T
AA25
PR83B
3
RDQ80
C
GND
GNDIO3
-
AA23
PR83A
3
RDQ80
T
AC29
PR82B
3
RDQ80
C (LVDS)*
AC30
PR82A
3
RDQ80
T (LVDS)*
AA26
PR81B
3
RDQ80
C
VCCIO
VCCIO3
3
AA24
PR81A
3
RDQ80
T
AB29
PR80B
3
RDQ80
C (LVDS)*
AB30
PR80A
3
RDQS80
T (LVDS)*
GND
GNDIO3
-
Y23
PR79B
3
RDQ80
C
Y25
PR79A
3
RDQ80
T
AA27
PR78B
3
RDQ80
C (LVDS)*
RDQ80
T (LVDS)*
AA28
PR78A
3
VCCIO
VCCIO3
3
Y24
PR77B
3
RLM0_GPLLC_FB_A/RDQ80
C
Y26
PR77A
3
RLM0_GPLLT_FB_A/RDQ80
T
AA29
PR76B
3
RLM0_GPLLC_IN_A**/RDQ80
C (LVDS)*
AA30
PR76A
3
RLM0_GPLLT_IN_A**/RDQ80
T (LVDS)*
R22
RLM0_PLLCAP
3
W23
PR74B
3
RLM0_GDLLC_FB_A/RDQ71
C
RLM0_GDLLT_FB_A/RDQ71
T
W25
PR74A
3
GND
GNDIO3
-
Y27
PR73B
3
RLM0_GDLLC_IN_A**/RDQ71
C (LVDS)*
Y28
PR73A
3
RLM0_GDLLT_IN_A**/RDQ71
T (LVDS)*
W24
PR72B
3
RDQ71
C
W26
PR72A
3
RDQ71
T
VCCIO
VCCIO3
3
Y29
PR71B
3
RDQ71
C (LVDS)*
Y30
PR71A
3
RDQS71
T (LVDS)*
V25
PR70B
3
RDQ71
C
GND
GNDIO3
-
4-118
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
V23
PR70A
3
RDQ71
T
W27
PR69B
3
RDQ71
C (LVDS)*
W28
PR69A
3
RDQ71
T (LVDS)*
V26
PR68B
3
RDQ71
C
VCCIO
VCCIO3
3
V24
PR68A
3
RDQ71
T
W29
PR67B
3
RDQ71
C (LVDS)*
W30
PR67A
3
RDQ71
T (LVDS)*
U25
PR66B
3
RDQ63
C
GND
GNDIO3
-
U23
PR66A
3
RDQ63
T
V29
PR65B
3
RDQ63
C (LVDS)*
V30
PR65A
3
RDQ63
T (LVDS)*
U26
PR64B
3
RDQ63
C
VCCIO
VCCIO3
3
U24
PR64A
3
RDQ63
T
U27
PR63B
3
RDQ63
C (LVDS)*
U28
PR63A
3
RDQS63
T (LVDS)*
GND
GNDIO3
-
T23
PR62B
3
RDQ63
C
T25
PR62A
3
RDQ63
T
U29
PR61B
3
RDQ63
C (LVDS)*
RDQ63
T (LVDS)*
U30
PR61A
3
VCCIO
VCCIO3
3
T24
PR60B
3
VREF2_3/RDQ63
C
T26
PR60A
3
VREF1_3/RDQ63
T
T27
PR59B
3
PCLKC3_0/RDQ63
C (LVDS)*
T28
PR59A
3
PCLKT3_0/RDQ63
T (LVDS)*
R24
PR57B
2
PCLKC2_0/RDQ54
C
R26
PR57A
2
PCLKT2_0/RDQ54
T
GND
GNDIO2
-
T29
PR56B
2
RDQ54
C (LVDS)*
T30
PR56A
2
RDQ54
T (LVDS)*
R23
PR55B
2
RDQ54
C
RDQ54
T
R25
PR55A
2
VCCIO
VCCIO2
2
R27
PR54B
2
RDQ54
C (LVDS)*
R28
PR54A
2
RDQS54
T (LVDS)*
RDQ54
C
P26
PR53B
2
GND
GNDIO2
-
P24
PR53A
2
RDQ54
T
R29
PR52B
2
RDQ54
C (LVDS)*
R30
PR52A
2
RDQ54
T (LVDS)*
4-119
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
RDQ54
C
P25
PR51B
2
VCCIO
VCCIO2
2
P23
PR51A
2
RDQ54
T
P27
PR50B
2
RDQ54
C (LVDS)*
RDQ54
T (LVDS)*
C
P28
PR50A
2
GND
GNDIO2
-
VCCIO
VCCIO2
2
N24
PR39B
2
RUM0_SPLLC_FB_A/RDQ37
N26
PR39A
2
RUM0_SPLLT_FB_A/RDQ37
T
N23
PR38B
2
RUM0_SPLLC_IN_A/RDQ37
C
RUM0_SPLLT_IN_A/RDQ37
T
N25
PR38A
2
VCCIO
VCCIO2
2
P29
PR37B
2
RDQ37
C (LVDS)*
P30
PR37A
2
RDQS37
T (LVDS)*
M26
PR36B
2
RDQ37
C
GND
GNDIO2
-
M24
PR36A
2
RDQ37
T
N29
PR35B
2
RDQ37
C (LVDS)*
N30
PR35A
2
RDQ37
T (LVDS)*
M25
PR34B
2
RDQ37
C
VCCIO
VCCIO2
2
M23
PR34A
2
RDQ37
T
M27
PR33B
2
RDQ37
C (LVDS)*
M28
PR33A
2
RDQ37
T (LVDS)*
RDQ29
C
L26
PR32B
2
GND
GNDIO2
-
L24
PR32A
2
RDQ29
T
M29
PR31B
2
RDQ29
C (LVDS)*
M30
PR31A
2
RDQ29
T (LVDS)*
L25
PR30B
2
RDQ29
C
VCCIO
VCCIO2
2
L23
PR30A
2
RDQ29
T
L27
PR29B
2
RDQ29
C (LVDS)*
L28
PR29A
2
RDQS29
T (LVDS)*
GND
GNDIO2
-
K24
PR28B
2
RDQ29
C
K26
PR28A
2
RDQ29
T
L29
PR27B
2
RDQ29
C (LVDS)*
RDQ29
T (LVDS)*
L30
PR27A
2
VCCIO
VCCIO2
2
K23
PR26B
2
RDQ29
C
K25
PR26A
2
RDQ29
T
K27
PR25B
2
RDQ29
C (LVDS)*
4-120
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
K28
PR25A
2
RDQ29
T (LVDS)*
J24
PR24B
2
RDQ21
C
RDQ21
T
J26
PR24A
2
GND
GNDIO2
-
K29
PR23B
2
RDQ21
C (LVDS)*
K30
PR23A
2
RDQ21
T (LVDS)*
J23
PR22B
2
RDQ21
C
J25
PR22A
2
RDQ21
T
VCCIO
VCCIO2
99
J27
PR21B
2
RDQ21
C (LVDS)*
J28
PR21A
2
RDQS21
T (LVDS)*
H26
PR20B
2
RDQ21
C
GND
GNDIO2
-
H24
PR20A
2
RDQ21
T
J29
PR19B
2
RDQ21
C (LVDS)*
J30
PR19A
2
RDQ21
T (LVDS)*
RDQ21
C
H25
PR18B
2
VCCIO
VCCIO2
2
H23
PR18A
2
RDQ21
T
G27
PR15B
2
RUM1_SPLLC_FB_A/RDQ12
C
GND
GNDIO2
-
H27
PR15A
2
RUM1_SPLLT_FB_A/RDQ12
T
G29
PR14B
2
RUM1_SPLLC_IN_A/RDQ12
C (LVDS)*
G28
PR14A
2
RUM1_SPLLT_IN_A/RDQ12
T (LVDS)*
VCCIO
VCCIO2
2
GND
GNDIO2
-
G26
PR6B
2
C (LVDS)*
G25
PR6A
2
T (LVDS)*
G30
PR5B
2
C
F30
PR5A
2
T
VCCIO
VCCIO2
2
F26
PR4B
2
C (LVDS)*
F27
PR4A
2
T (LVDS)*
F29
PR3B
2
C
GND
GNDIO2
-
F28
PR3A
2
H29
PR2B
2
VREF2_2
C (LVDS)*
H30
PR2A
2
VREF1_2
T (LVDS)*
VCCIO
VCCIO2
2
B26
PT100B
1
VREF2_1
C
VREF1_1
T
A26
PT100A
1
GND
GNDIO1
-
C25
PT99B
1
4-121
T
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
D25
PT99A
1
T
J22
PT98B
1
C
T
J21
PT98A
1
VCCIO
VCCIO1
1
B25
PT97B
1
C
A25
PT97A
1
T
E24
PT96B
1
C
F24
PT96A
1
T
GND
GNDIO1
-
F23
PT95B
1
H22
PT95A
1
T
D24
PT94B
1
C
T
C24
PT94A
1
VCCIO
VCCIO1
1
C
E23
PT93B
1
C
G23
PT93A
1
T
B24
PT92B
1
C
A24
PT92A
1
T
C
C27
PT91B
1
GND
GNDIO1
-
D27
PT91A
1
T
C26
PT90B
1
C
D26
PT90A
1
T
A27
PT89B
1
C
VCCIO
VCCIO1
1
B27
PT89A
1
T
A28
PT88B
1
C
B28
PT88A
1
T
A29
PT87B
1
C
B29
PT87A
1
T
GND
GNDIO1
-
VCCIO
VCCIO1
1
H21
PT80B
1
C
F22
PT80A
1
T
VCCIO
VCCIO1
1
B23
PT79B
1
A23
PT79A
1
T
G24
PT78B
1
C
T
C
E22
PT78A
1
GND
GNDIO1
-
D22
PT77B
1
C
C22
PT77A
1
T
G22
PT76B
1
C
4-122
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
E21
PT76A
1
VCCIO
VCCIO1
1
T
B22
PT75B
1
C
A22
PT75A
1
T
H20
PT74B
1
C
F21
PT74A
1
T
C
F20
PT73B
1
GND
GNDIO1
-
H19
PT73A
1
T
D21
PT72B
1
C
C21
PT72A
1
T
E20
PT71B
1
C
VCCIO
VCCIO1
1
G21
PT71A
1
T
B21
PT70B
1
C
A21
PT70A
1
T
F19
PT69B
1
C
G20
PT69A
1
T
E19
PT68B
1
C
GND
GNDIO1
-
G19
PT68A
1
T
D20
PT67B
1
C
VCCIO
VCCIO1
1
C20
PT67A
1
T
B20
PT66B
1
C
A20
PT66A
1
T
F18
PT65B
1
C
H18
PT65A
1
T
D19
PT64B
1
C
C19
PT64A
1
T
GND
GNDIO1
-
G18
PT63B
1
E18
PT63A
1
T
H17
PT62B
1
C
F17
PT62A
1
T
VCCIO
VCCIO1
1
C
G17
PT61B
1
C
E17
PT61A
1
T
B19
PT60B
1
C
A19
PT60A
1
T
GND
GNDIO1
-
D17
PT59B
1
C
B18
PT59A
1
T
4-123
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
C17
PT58B
1
C
A18
PT58A
1
T
VCCIO
VCCIO1
1
H16
PT57B
1
PCLKC1_0
C
F16
PT57A
1
PCLKT1_0
T
K16
XRES
1
E16
PT55B
0
PCLKC0_0
C
GND
GNDIO0
-
G16
PT55A
0
B17
PT54B
0
PCLKT0_0
T
A17
PT54A
0
T
J15
PT53B
0
C
VCCIO
VCCIO0
0
J16
PT53A
0
T
C16
PT52B
0
C
D16
PT52A
0
T
C
F15
PT51B
0
C
H15
PT51A
0
T
E15
PT50B
0
C
GND
GNDIO0
-
G15
PT50A
0
T
C15
PT49B
0
C
VCCIO
VCCIO0
0
D15
PT49A
0
T
B16
PT48B
0
C
A16
PT48A
0
T
E14
PT47B
0
C
G14
PT47A
0
T
B15
PT46B
0
C
A15
PT46A
0
T
GND
GNDIO0
-
H14
PT45B
0
C
F14
PT45A
0
T
D14
PT44B
0
C
C14
PT44A
0
T
VCCIO
VCCIO0
0
G13
PT43B
0
C
E13
PT43A
0
T
B14
PT42B
0
C
A14
PT42A
0
T
GND
GNDIO0
-
H13
PT41B
0
C
F13
PT41A
0
T
4-124
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
G12
PT40B
0
C
E12
PT40A
0
T
VCCIO
VCCIO0
0
B13
PT39B
0
A13
PT39A
0
T
H12
PT38B
0
C
C
F12
PT38A
0
T
C12
PT37B
0
C
GND
GNDIO0
-
D12
PT37A
0
T
B12
PT36B
0
C
A12
PT36A
0
T
C
E11
PT35B
0
VCCIO
VCCIO0
0
G11
PT35A
0
T
F11
PT34B
0
C
H11
PT34A
0
T
C11
PT33B
0
C
D11
PT33A
0
T
B11
PT32B
0
C
GND
GNDIO0
-
A11
PT32A
0
T
C
E10
PT31B
0
VCCIO
VCCIO0
0
G10
PT31A
0
T
F10
PT30B
0
C
H10
PT30A
0
T
D10
PT29B
0
C
T
C10
PT29A
0
GND
GNDIO0
-
VCCIO
VCCIO0
0
A7
PT16B
0
B7
PT16A
0
T
A6
PT15B
0
C
C
B6
PT15A
0
T
C7
PT14B
0
C
GND
GNDIO0
-
D7
PT14A
0
T
C
D8
PT13B
0
VCCIO
VCCIO0
0
E7
PT13A
0
T
C6
PT12B
0
C
D6
PT12A
0
T
4-125
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
C5
PT11B
0
C
D5
PT11A
0
T
E9
PT10B
0
C
G9
PT10A
0
T
GND
GNDIO0
-
B10
PT9B
0
A10
PT9A
0
T
D9
PT8B
0
C
C9
PT8A
0
T
VCCIO
VCCIO0
0
C
F9
PT7B
0
C
H9
PT7A
0
T
B9
PT6B
0
C
A9
PT6A
0
T
GND
GNDIO0
-
E8
PT5B
0
C
G8
PT5A
0
T
A8
PT4B
0
C
T
B8
PT4A
0
VCCIO
VCCIO0
0
F8
PT3B
0
C
F7
PT3A
0
T
J10
PT2B
0
VREF2_0
C
J9
PT2A
0
VREF1_0
T
AA11
VCC
-
AA20
VCC
-
K11
VCC
-
K21
VCC
-
K22
VCC
-
L11
VCC
-
L12
VCC
-
L13
VCC
-
L18
VCC
-
L19
VCC
-
L20
VCC
-
M11
VCC
-
M20
VCC
-
N11
VCC
-
N20
VCC
-
V11
VCC
-
V20
VCC
-
W11
VCC
-
W20
VCC
-
4-126
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
Y10
VCC
-
Y11
VCC
-
Y12
VCC
-
Y13
VCC
-
Y18
VCC
-
Y19
VCC
-
Y20
VCC
-
J13
VCCIO0
0
J14
VCCIO0
0
K12
VCCIO0
0
K13
VCCIO0
0
K14
VCCIO0
0
K15
VCCIO0
0
J17
VCCIO1
1
J18
VCCIO1
1
J20
VCCIO1
1
K17
VCCIO1
1
K18
VCCIO1
1
K20
VCCIO1
1
L21
VCCIO2
2
M21
VCCIO2
2
M22
VCCIO2
2
N21
VCCIO2
2
N22
VCCIO2
2
R21
VCCIO2
2
U21
VCCIO3
3
U22
VCCIO3
3
V21
VCCIO3
3
V22
VCCIO3
3
W21
VCCIO3
3
Y22
VCCIO3
3
AA16
VCCIO4
4
AA17
VCCIO4
4
AA18
VCCIO4
4
AA19
VCCIO4
4
AB17
VCCIO4
4
AB18
VCCIO4
4
AA12
VCCIO5
5
AA13
VCCIO5
5
AA14
VCCIO5
5
AB12
VCCIO5
5
AB13
VCCIO5
5
AB14
VCCIO5
5
4-127
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
U10
VCCIO6
6
U9
VCCIO6
6
V10
VCCIO6
6
W10
VCCIO6
6
W9
VCCIO6
6
Y9
VCCIO6
6
L10
VCCIO7
7
L9
VCCIO7
7
M10
VCCIO7
7
N10
VCCIO7
7
P10
VCCIO7
7
R10
VCCIO7
7
AA21
VCCIO8
8
Y21
VCCIO8
8
AA15
VCCAUX
-
AB11
VCCAUX
-
AB19
VCCAUX
-
AB20
VCCAUX
-
J11
VCCAUX
-
J12
VCCAUX
-
J19
VCCAUX
-
K19
VCCAUX
-
L22
VCCAUX
-
M9
VCCAUX
-
N9
VCCAUX
-
P21
VCCAUX
-
P9
VCCAUX
-
T10
VCCAUX
-
T21
VCCAUX
-
V9
VCCAUX
-
W22
VCCAUX
-
A1
GND
-
A30
GND
-
AC28
GND
-
AC3
GND
-
AH13
GND
-
AH18
GND
-
AH23
GND
-
AH28
GND
-
AH3
GND
-
AH8
GND
-
AK1
GND
-
AK30
GND
-
4-128
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
C13
GND
-
C18
GND
-
C23
GND
-
C28
GND
-
C3
GND
-
C8
GND
-
H28
GND
-
H3
GND
-
L14
GND
-
L15
GND
-
L16
GND
-
L17
GND
-
M12
GND
-
M13
GND
-
M14
GND
-
M15
GND
-
M16
GND
-
M17
GND
-
M18
GND
-
M19
GND
-
N12
GND
-
N13
GND
-
N14
GND
-
N15
GND
-
N16
GND
-
N17
GND
-
N18
GND
-
N19
GND
-
N28
GND
-
N3
GND
-
P11
GND
-
P12
GND
-
P13
GND
-
P14
GND
-
P15
GND
-
P16
GND
-
P17
GND
-
P18
GND
-
P19
GND
-
P20
GND
-
R11
GND
-
R12
GND
-
R13
GND
-
4-129
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
R14
GND
-
R15
GND
-
R16
GND
-
R17
GND
-
R18
GND
-
R19
GND
-
R20
GND
-
T11
GND
-
T12
GND
-
T13
GND
-
T14
GND
-
T15
GND
-
T16
GND
-
T17
GND
-
T18
GND
-
T19
GND
-
T20
GND
-
U11
GND
-
U12
GND
-
U13
GND
-
U14
GND
-
U15
GND
-
U16
GND
-
U17
GND
-
U18
GND
-
U19
GND
-
U20
GND
-
V12
GND
-
V13
GND
-
V14
GND
-
V15
GND
-
V16
GND
-
V17
GND
-
V18
GND
-
V19
GND
-
V28
GND
-
V3
GND
-
W12
GND
-
W13
GND
-
W14
GND
-
W15
GND
-
W16
GND
-
W17
GND
-
4-130
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
W18
GND
-
W19
GND
-
Y14
GND
-
Y15
GND
-
Y16
GND
-
Y17
GND
-
A2
NC
-
A3
NC
-
A4
NC
-
A5
NC
-
AB28
NC
-
AC4
NC
-
AD23
NC
-
AE1
NC
-
AE2
NC
-
AE29
NC
-
AE3
NC
-
AE30
NC
-
AE4
NC
-
AE5
NC
-
AE6
NC
-
AF1
NC
-
AF2
NC
-
AF23
NC
-
AF26
NC
-
AF27
NC
-
AF28
NC
-
AF29
NC
-
AF3
NC
-
AF30
NC
-
AF4
NC
-
AF5
NC
-
AG1
NC
-
AG13
NC
-
AG16
NC
-
AG18
NC
-
AG2
NC
-
AG26
NC
-
AG27
NC
-
AG28
NC
-
AG29
NC
-
AG3
NC
-
AG30
NC
-
4-131
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
AG4
NC
-
AG8
NC
-
AH1
NC
-
AH16
NC
-
AH2
NC
-
AH26
NC
-
AH27
NC
-
AH29
NC
-
AH30
NC
-
AH4
NC
-
AJ1
NC
-
AJ2
NC
-
AJ27
NC
-
AJ28
NC
-
AJ29
NC
-
AJ3
NC
-
AJ30
NC
-
AK2
NC
-
AK27
NC
-
AK28
NC
-
AK29
NC
-
AK3
NC
-
B1
NC
-
B2
NC
-
B3
NC
-
B30
NC
-
B4
NC
-
B5
NC
-
C1
NC
-
C2
NC
-
C29
NC
-
C30
NC
-
C4
NC
-
D13
NC
-
D18
NC
-
D23
NC
-
D28
NC
-
D29
NC
-
D3
NC
-
D30
NC
-
D4
NC
-
E25
NC
-
E26
NC
-
4-132
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2-70E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2-70E/SE
Ball Number
Ball/Pad Function
Bank
E27
NC
-
E28
NC
-
E29
NC
-
E3
NC
-
E30
NC
-
E4
NC
-
E5
NC
-
E6
NC
-
F25
NC
-
F5
NC
-
F6
NC
-
G6
NC
-
G7
NC
-
K10
NC
-
K9
NC
-
N27
NC
-
N4
NC
-
R1
NC
-
R2
NC
-
V27
NC
-
V4
NC
-
P22
VCCPLL
-
P8
VCCPLL
-
T22
VCCPLL
-
Y7
VCCPLL
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
***Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-133
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M-20E/SE and LFE2M-35E/SE Logic Signal Connections: 256 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
Bank
Dual
Function
A2
PL2A
7
Differential
LDQ6
T (LVDS)*
PL2A
7
LDQ6
B2
PL2B
T (LVDS)*
7
LDQ6
C (LVDS)*
PL2B
7
LDQ6
D3
C(LVDS)*
PL3A
7
LDQ6
T
PL3A
7
LDQ6
C2
T
PL3B
7
LDQ6
C
PL3B
7
LDQ6
C
LDQ6
T (LVDS)*
PL4A
7
LDQ6
T (LVDS)*
VCCIO7
7
C(LVDS)*
E4
PL4A
7
VCCIO
VCCIO7
7
E5
PL4B
7
LDQ6
C (LVDS)*
PL4B
7
LDQ6
B1
PL5A
7
LDQ6
T
PL5A
7
LDQ6
T
C1
PL5B
7
LDQ6
C
PL5B
7
LDQ6
C
LDQS6
T (LVDS)*
PL6A
7
LDQS6
T (LVDS)*
GNDIO7
C(LVDS)*
D2
PL6A
7
GNDIO
GNDIO7
-
D1
PL6B
7
LDQ6
C (LVDS)*
PL6B
7
LDQ6
E1
PL7A
7
LDQ6
T
PL7A
7
LDQ6
T
F1
PL7B
7
LDQ6
C
PL7B
7
LDQ6
C
VCCIO
VCCIO7
7
VCCIO7
7
F3
PL8A
7
LDQ6
T (LVDS)*
PL8A
7
LDQ6
T (LVDS)*
F2
PL8B
7
LDQ6
C (LVDS)*
PL8B
7
LDQ6
C(LVDS)*
F6
PL9A
7
VREF2_7/LDQ6
T
PL9A
7
VREF2_7/LDQ6
T
F5
PL9B
7
VREF1_7/LDQ6
C
PL9B
7
VREF1_7/LDQ6
C
GNDIO
GNDIO7
-
GNDIO7
-
G4
PL11A
7
LUM0_SPLLT_IN_A
T (LVDS)*
PL11A
7
LUM0_SPLLT_IN_A/LDQ15
T (LVDS)*
G3
PL11B
7
LUM0_SPLLC_IN_A
C (LVDS)*
PL11B
7
LUM0_SPLLC_IN_A/LDQ15
C(LVDS)*
G1
PL12A
7
LUM0_SPLLT_FB_A
T
PL12A
7
LUM0_SPLLT_FB_A/LDQ15
T
G2
PL12B
7
LUM0_SPLLC_FB_A
C
PL12B
7
LUM0_SPLLC_FB_A/LDQ15
C
PL13A
7
LDQ15
T (LVDS)*
VCCIO7
7
C(LVDS)*
H1
PL13A
7
VCCIO
VCCIO7
7
T (LVDS)*
J1
PL13B
7
C (LVDS)*
PL13B
7
LDQ15
H2
PL14A
7
T
PL14A
7
LDQ15
T
H3
PL14B
7
C
PL14B
7
LDQ15
C
GNDIO
GNDIO7
-
GNDIO7
-
VCCIO
VCCIO7
7
VCCIO7
7
G6
PL24A
7
LDQ22
T (LVDS)*
PL34A
7
LDQ32
T (LVDS)*
H6
PL24B
7
LDQ22
C (LVDS)*
PL34B
7
LDQ32
C(LVDS)*
J2
PL25A
7
PCLKT7_0/LDQ22
T
PL35A
7
PCLKT7_0/LDQ32
T
GNDIO
GNDIO7
-
GNDIO7
-
K1
PL25B
7
PCLKC7_0/LDQ22
C
PL35B
7
PCLKC7_0/LDQ32
C
H4
PL27A
6
PCLKT6_0
T (LVDS)*
PL37A
6
PCLKT6_0
T (LVDS)*
C(LVDS)*
H5
PL27B
6
PCLKC6_0
C (LVDS)*
PL37B
6
PCLKC6_0
J4
PL28A
6
VREF2_6
T
PL38A
6
VREF2_6
T
K4
PL28B
6
VREF1_6
C
PL38B
6
VREF1_6
C
VCCIO
VCCIO6
6
VCCIO6
6
J6
PL31A
6
LLM1_SPLLT_IN_A
T (LVDS)*
PL41A
6
LLM2_SPLLT_IN_A
T (LVDS)*
GNDIO
GNDIO6
-
GNDIO6
C(LVDS)*
J5
PL31B
6
LLM1_SPLLC_IN_A
C (LVDS)*
PL41B
6
LLM2_SPLLC_IN_A
K3
PL32A
6
LLM1_SPLLT_FB_A
T
PL42A
6
LLM2_SPLLT_FB_A
T
K2
PL32B
6
LLM1_SPLLC_FB_A
C
PL42B
6
LLM2_SPLLC_FB_A
C
6
LLM0_GPLLT_IN_A**/LDQS57***
T (LVDS)*
VCCIO
VCCIO6
6
VCCIO6
GNDIO
GNDIO6
-
GNDIO6
-
L1
PL42A
6
PL57A
6
LLM0_GPLLT_IN_A
T (LVDS)*
4-134
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M-20E/SE and LFE2M-35E/SE Logic Signal Connections: 256 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
GNDIO
GNDIO6
-
L2
PL42B
6
LLM0_GPLLC_IN_A
C (LVDS)*
PL57B
L3
PL43A
6
LLM0_GPLLT_FB_A
T
PL58A
L4
PL43B
6
LLM0_GPLLC_FB_A
C
PL58B
6
VCCIO
VCCIO6
6
VCCIO6
6
M1
PL44A
6
LLM0_GDLLT_IN_A
T (LVDS)*
PL59A
N1
PL44B
6
LLM0_GDLLC_IN_A
C (LVDS)*
PL59B
N2
PL45A
6
LLM0_GDLLT_FB_A
T
PL60A
6
LLM0_GDLLT_FB_A/LDQ57
T
N3
PL45B
6
LLM0_GDLLC_FB_A
C
PL60B
6
LLM0_GDLLC_FB_A/LDQ57
C
Dual Function
Differential
Ball/Pad
Function
Bank
Dual
Function
GNDIO6
-
Differential
6
LLM0_GPLLC_IN_A**/LDQ57
C(LVDS)*
6
LLM0_GPLLT_FB_A/LDQ57
T
LLM0_GPLLC_FB_A/LDQ57
C
6
LLM0_GDLLT_IN_A**/LDQ57
T (LVDS)*
6
LLM0_GDLLC_IN_A**/LDQ57
C(LVDS)*
GNDIO
GNDIO6
-
GNDIO6
-
M4
LLM0_PLLCAP
6
LLM0_PLLCAP
6
6
VCCIO
VCCIO6
6
VCCIO6
GNDIO
GNDIO6
-
GNDIO6
-
K6
TCK
-
TCK
-
L5
TDI
-
TDI
-
N4
TMS
-
TMS
-
N6
TDO
-
TDO
-
K7
VCCJ
-
VCCJ
-
M5
PB2A
5
BDQ6
T
PB2A
5
BDQ6
T
N5
PB2B
5
BDQ6
C
PB2B
5
BDQ6
C
L6
PB3A
5
BDQ6
T
PB3A
5
BDQ6
T
M6
PB3B
5
BDQ6
C
PB3B
5
BDQ6
C
BDQ6
T
BDQ6
T
C
P3
PB4A
5
VCCIO
VCCIO5
5
PB4A
5
VCCIO5
5
P4
PB4B
5
BDQ6
P2
PB5A
5
BDQ6
C
PB4B
5
BDQ6
T
PB5A
5
BDQ6
P1
PB5B
5
T
BDQ6
C
PB5B
5
BDQ6
C
BDQS6
T
BDQS6
T
C
R1
PB6A
5
GNDIO
GNDIO5
-
PB6A
5
GNDIO5
-
R2
PB6B
5
BDQ6
R3
PB7A
5
BDQ6
C
PB6B
5
BDQ6
T
PB7A
5
BDQ6
T2
PB7B
5
T
BDQ6
C
PB7B
5
BDQ6
C
R4
PB8A
5
VCCIO
VCCIO5
5
BDQ6
T
BDQ6
T
T3
PB8B
5
BDQ6
T4
PB10A
5
BDQ6
GNDIO
GNDIO5
BDQ6
PB8A
5
VCCIO5
5
C
PB8B
5
BDQ6
C
T
PB10A
5
BDQ6
T
GNDIO5
-
PB10B
5
BDQ6
C
VCCIO5
5
T5
PB10B
5
VCCIO
VCCIO5
5
C
GNDIO
GNDIO5
-
GNDIO5
-
T6
PB16A
5
VREF2_5/BDQ15
T
PB34A
5
VREF2_5/BDQ33
T
R6
PB16B
5
VREF1_5/BDQ15
C
PB34B
5
VREF1_5/BDQ33
C
P6
PB17A
5
PCLKT5_0/BDQ15
T
PB35A
5
PCLKT5_0/BDQ33
T
P7
PB17B
5
PCLKC5_0/BDQ15
C
PB35B
5
PCLKC5_0/BDQ33
C
5
PCLKT4_0/BDQ42
T
PCLKC4_0/BDQ42
C
VCCIO
VCCIO5
5
VCCIO5
GNDIO
GNDIO5
-
GNDIO5
-
T7
PB22A
4
PB40A
4
VCCIO
VCCIO4
4
VCCIO4
4
T8
PB22B
4
PB40B
4
PCLKT4_0/BDQ24
PCLKC4_0/BDQ24
T
C
4-135
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M-20E/SE and LFE2M-35E/SE Logic Signal Connections: 256 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
Bank
Dual
Function
L7
PB23A
4
VREF2_4/BDQ24
T
PB41A
4
VREF2_4/BDQ42
L8
PB23B
4
T
VREF1_4/BDQ24
C
PB41B
4
VREF1_4/BDQ42
C
GNDIO
GNDIO4
-
GNDIO4
-
VCCIO
VCCIO4
4
VCCIO4
4
GNDIO
GNDIO4
-
GNDIO4
-
P8
PB29A
4
BDQ33
T
PB47A
4
BDQ51
T
N8
PB29B
4
BDQ33
C
PB47B
4
BDQ51
C
R7
PB30A
4
BDQ33
T
PB48A
4
BDQ51
T
R8
PB30B
4
BDQ33
C
PB48B
4
BDQ51
C
Differential
N7
PB31A
4
BDQ33
T
PB49A
4
BDQ51
T
M8
PB31B
4
BDQ33
C
PB49B
4
BDQ51
C
VCCIO
VCCIO4
4
VCCIO4
4
R9
PB32A
4
BDQ33
T
PB50A
4
BDQ51
T
T9
PB32B
4
BDQ33
C
PB50B
4
BDQ51
C
GNDIO
GNDIO4
-
GNDIO4
-
T10
PB33A
4
BDQS33
T
PB51A
4
BDQS51
T
R10
PB33B
4
BDQ33
C
PB51B
4
BDQ51
C
N9
PB34A
4
BDQ33
T
PB52A
4
BDQ51
T
P10
PB34B
4
BDQ33
C
PB52B
4
BDQ51
C
4
VCCIO
VCCIO4
4
VCCIO4
GNDIO
GNDIO4
-
GNDIO4
-
L9
PB47A
4
BDQ51
T
PB65A
4
BDQ69
T
M9
PB47B
4
BDQ51
C
PB65B
4
BDQ69
C
T11
PB49A
4
BDQ51
T
PB67A
4
BDQ69
T
R11
PB49B
4
BDQ51
C
PB67B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
T12
PB50A
4
BDQ51
T
PB68A
4
BDQ69
T
T13
PB50B
4
BDQ51
C
PB68B
4
BDQ69
C
GNDIO
GNDIO4
-
GNDIO4
-
P11
PB51A
4
BDQS51
T
PB69A
4
BDQS69
T
N10
PB51B
4
BDQ51
C
PB69B
4
BDQ69
C
T14
PB52A
4
BDQ51
T
PB70A
4
BDQ69
T
R13
PB52B
4
BDQ51
C
PB70B
4
BDQ69
C
R15
PB53A
4
BDQ51
T
PB71A
4
BDQ69
T
R16
PB53B
4
BDQ51
C
PB71B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
R14
PB54A
4
BDQ51
T
PB72A
4
BDQ69
T
P15
PB54B
4
BDQ51
C
PB72B
4
BDQ69
C
P16
PB55A
4
BDQ51
T
PB73A
4
BDQ69
T
P14
PB55B
4
BDQ51
C
PB73B
4
BDQ69
C
GNDIO
GNDIO4
-
GNDIO4
-
L11
CFG2
8
CFG2
8
L10
CFG1
8
CFG1
8
P13
CFG0
8
CFG0
8
N12
PROGRAMN
8
PROGRAMN
8
N11
CCLK
8
CCLK
8
M11
INITN
8
INITN
8
N13
DONE
8
DONE
8
GNDIO
GNDIO8
-
GNDIO8
-
4-136
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M-20E/SE and LFE2M-35E/SE Logic Signal Connections: 256 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
Bank
Dual
Function
M12
PR53B
8
Differential
WRITEN
C
PR68B
8
WRITEN
M13
PR53A
C
8
CS1N
T
PR68A
8
CS1N
N14
T
PR52B
8
CSN
C
PR67B
8
CSN
C
D0/SPIFASTN
T
D0/SPIFASTN
T
C
N15
PR52A
8
VCCIO
VCCIO8
8
PR67A
8
VCCIO8
8
N16
PR51B
8
D1
C
PR66B
8
D1
M16
PR51A
8
D2
T
PR66A
8
D2
T
L12
PR50B
8
D3
C
PR65B
8
D3
C
GNDIO
GNDIO8
-
GNDIO8
-
L13
PR50A
8
D4
T
PR65A
8
D4
T
L16
PR49B
8
D5
C
PR64B
8
D5
C
K16
PR49A
8
D6
T
PR64A
8
D6
T
L14
PR48B
8
D7
C
PR63B
8
D7
C
VCCIO
VCCIO8
8
VCCIO8
8
L15
PR48A
8
DI/CSSPI0N
T
PR63A
8
DI/CSSPI0N
T
K13
PR47B
8
DOUT/CSON/CSSPI1N
C
PR62B
8
DOUT/CSON/CSSPI1N
C
K14
PR47A
8
BUSY/SISPI
T
BUSY/SISPI
T
K11
RLM0_PLLCAP
3
RLM0_GDLLC_FB_A/RDQ57
C
K15
PR45B
3
GNDIO
GNDIO3
-
RLM0_GDLLC_FB_A
C
PR62A
8
RLM0_PLLCAP
3
PR60B
3
GNDIO3
-
J16
PR45A
3
RLM0_GDLLT_FB_A
T
PR60A
3
RLM0_GDLLT_FB_A/RDQ57
T
H16
PR44B
3
RLM0_GDLLC_IN_A
C (LVDS)*
PR59B
3
RLM0_GDLLC_IN_A**/RDQ57
C(LVDS)*
J15
PR44A
3
RLM0_GDLLT_IN_A
T (LVDS)*
PR59A
3
RLM0_GDLLT_IN_A**/RDQ57
T (LVDS)*
J14
PR43B
3
RLM0_GPLLC_IN_A
C
PR58B
3
RLM0_GPLLC_IN_A**/RDQ57
C
VCCIO
VCCIO3
3
VCCIO3
3
J13
PR43A
3
RLM0_GPLLT_IN_A
T
PR58A
3
RLM0_GPLLT_IN_A**/RDQ57
T
H13
PR42B
3
RLM0_GPLLC_FB_A
C (LVDS)*
PR57B
3
RLM0_GPLLC_FB_A/RDQ57
C(LVDS)*
RLM0_GPLLT_FB_A
T (LVDS)*
RLM0_GPLLT_FB_A/RDQS57***
T (LVDS)*
RLM2_SPLLC_FB_A
C
H12
PR42A
3
GNDIO
GNDIO3
-
VCCIO
VCCIO3
3
G16
PR32B
3
VCCIO
VCCIO3
3
RLM1_SPLLC_FB_A
C
PR57A
3
GNDIO3
-
VCCIO3
3
PR42B
3
VCCIO3
3
H15
PR32A
3
RLM1_SPLLT_FB_A
T
PR42A
3
RLM2_SPLLT_FB_A
T
E16
PR31B
3
RLM1_SPLLC_IN_A
C (LVDS)*
PR41B
3
RLM2_SPLLC_IN_A
C(LVDS)*
RLM1_SPLLT_IN_A
T (LVDS)*
PR41A
3
RLM2_SPLLT_IN_A
T (LVDS)*
GNDIO3
-
C
F15
PR31A
3
GNDIO
GNDIO3
-
VCCIO
VCCIO3
3
VCCIO3
3
F16
PR28B
3
VREF2_3
C
PR38B
3
VREF2_3
G15
PR28A
3
VREF1_3
T
PR38A
3
VREF1_3
T
J11
PR27B
3
PCLKC3_0
C (LVDS)*
PR37B
3
PCLKC3_0
C(LVDS)*
J12
PR27A
3
PCLKT3_0
T (LVDS)*
PR37A
3
PCLKT3_0
T (LVDS)*
G14
PR25B
2
PCLKC2_0/RDQ22
C
PR35B
2
PCLKC2_0/RDQ32
C
G13
PR25A
2
PCLKT2_0/RDQ22
T
PR35A
2
PCLKT2_0/RDQ32
T
GNDIO
GNDIO2
-
GNDIO2
-
F14
PR24B
2
RDQ22
C (LVDS)*
PR34B
2
RDQ32
C(LVDS)*
F13
PR24A
2
RDQ22
T (LVDS)*
PR34A
2
RDQ32
T (LVDS)*
2
RDQ15
C
VCCIO
VCCIO2
2
VCCIO2
GNDIO
GNDIO2
-
GNDIO2
-
H11
PR14B
2
PR14B
2
C
4-137
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M-20E/SE and LFE2M-35E/SE Logic Signal Connections: 256 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
G11
PR14A
E13
LFE2M35E/SE
Differential
Ball/Pad
Function
Bank
Dual
Function
2
T
PR14A
2
RDQ15
T
PR13B
2
C (LVDS)*
PR13B
2
RDQ15
C(LVDS)*
F12
PR13A
2
T (LVDS)*
PR13A
2
RDQ15
T (LVDS)*
VCCIO
VCCIO2
2
VCCIO2
2
C
Dual Function
Differential
F11
PR12B
2
RUM0_SPLLC_FB_A
C
PR12B
2
RUM0_SPLLC_FB_A/RDQ15
E12
PR12A
2
RUM0_SPLLT_FB_A
T
PR12A
2
RUM0_SPLLT_FB_A/RDQ15
T
D16
PR11B
2
RUM0_SPLLC_IN_A
C (LVDS)*
PR11B
2
RUM0_SPLLC_IN_A/RDQ15
C(LVDS)*
D15
PR11A
2
RUM0_SPLLT_IN_A
T (LVDS)*
PR11A
2
RUM0_SPLLT_IN_A/RDQ15
T (LVDS)*
C16
PR9B
2
VREF2_2
C
PR9B
2
VREF2_2
C
GNDIO
GNDIO2
-
GNDIO2
-
B16
PR9A
2
PR9A
2
VREF1_2
T
VCCIO
VCCIO2
2
VCCIO2
2
VREF1_2
T
F4
XRES
-
XRES
-
C15
URC_SQ_VCCRX0
12
URC_SQ_VCCRX0
12
A14
URC_SQ_HDINP0
12
URC_SQ_HDINP0
12
B15
URC_SQ_VCCIB0
12
URC_SQ_VCCIB0
12
B14
URC_SQ_HDINN0
12
C12
URC_SQ_VCCTX0
12
A11
URC_SQ_HDOUTP0
12
A12
URC_SQ_VCCOB0
12
B11
URC_SQ_HDOUTN0
12
C11
URC_SQ_VCCTX1
12
B10
URC_SQ_HDOUTN1
12
C10
URC_SQ_VCCOB1
12
A10
URC_SQ_HDOUTP1
12
C14
URC_SQ_VCCRX1
12
B13
URC_SQ_HDINN1
12
C13
URC_SQ_VCCIB1
12
A13
URC_SQ_HDINP1
12
B9
URC_SQ_VCCAUX33
12
D8
URC_SQ_REFCLKN
12
D9
URC_SQ_REFCLKP
12
C9
URC_SQ_VCCP
12
A5
URC_SQ_HDINP2
12
C5
URC_SQ_VCCIB2
12
B5
URC_SQ_HDINN2
12
C4
URC_SQ_VCCRX2
12
A8
URC_SQ_HDOUTP2
12
C8
URC_SQ_VCCOB2
12
B8
URC_SQ_HDOUTN2
12
C7
URC_SQ_VCCTX2
12
B7
URC_SQ_HDOUTN3
12
A6
URC_SQ_VCCOB3
12
A7
URC_SQ_HDOUTP3
12
C6
URC_SQ_VCCTX3
12
B4
URC_SQ_HDINN3
12
B3
URC_SQ_VCCIB3
12
A4
URC_SQ_HDINP3
12
C3
URC_SQ_VCCRX3
12
T
C
T
C
C
T
C
T
URC_SQ_HDINN0
12
URC_SQ_VCCTX0
12
URC_SQ_HDOUTP0
12
URC_SQ_VCCOB0
12
URC_SQ_HDOUTN0
12
URC_SQ_VCCTX1
12
URC_SQ_HDOUTN1
12
URC_SQ_VCCOB1
12
URC_SQ_HDOUTP1
12
URC_SQ_VCCRX1
12
URC_SQ_HDINN1
12
URC_SQ_VCCIB1
12
T
C
T
C
C
T
C
URC_SQ_HDINP1
12
URC_SQ_VCCAUX33
12
C
URC_SQ_REFCLKN
12
C
T
URC_SQ_REFCLKP
12
T
URC_SQ_VCCP
12
URC_SQ_HDINP2
12
URC_SQ_VCCIB2
12
T
C
T
C
C
T
C
T
URC_SQ_HDINN2
12
URC_SQ_VCCRX2
12
URC_SQ_HDOUTP2
12
URC_SQ_VCCOB2
12
URC_SQ_HDOUTN2
12
URC_SQ_VCCTX2
12
URC_SQ_HDOUTN3
12
URC_SQ_VCCOB3
12
URC_SQ_HDOUTP3
12
URC_SQ_VCCTX3
12
URC_SQ_HDINN3
12
URC_SQ_VCCIB3
12
URC_SQ_HDINP3
12
URC_SQ_VCCRX3
12
4-138
T
T
C
T
C
C
T
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M-20E/SE and LFE2M-35E/SE Logic Signal Connections: 256 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
GNDIO
GNDIO1
-
Dual Function
LFE2M35E/SE
Differential
Ball/Pad
Function
Bank
GNDIO1
1
VCCIO
VCCIO1
1
VCCIO1
GNDIO
GNDIO0
-
GNDIO0
-
VCCIO
VCCIO0
0
VCCIO0
0
G10
VCCPLL
-
VCCPLL
-
G7
VCC
-
VCC
-
G9
VCC
-
VCC
-
H7
VCC
-
VCC
-
J10
VCC
-
VCC
-
K10
VCC
-
VCC
-
K8
VCC
-
VCC
-
E7
VCCIO0
0
VCCIO0
0
VCCIO
VCCIO0
0
VCCIO0
0
E10
VCCIO1
1
VCCIO1
1
VCCIO
VCCIO1
1
VCCIO1
1
E14
VCCIO2
2
VCCIO2
2
2
G12
VCCIO2
2
VCCIO2
VCCIO
VCCIO2
2
VCCIO2
2
K12
VCCIO3
3
VCCIO3
3
M14
VCCIO3
3
VCCIO3
3
VCCIO
VCCIO3
3
VCCIO3
3
M10
VCCIO4
4
VCCIO4
4
P12
VCCIO4
4
VCCIO4
4
VCCIO
VCCIO4
4
VCCIO4
4
M7
VCCIO5
5
VCCIO5
5
5
P5
VCCIO5
5
VCCIO5
VCCIO
VCCIO5
5
VCCIO5
5
K5
VCCIO6
6
VCCIO6
6
6
M3
VCCIO6
6
VCCIO6
VCCIO
VCCIO6
6
VCCIO6
6
E3
VCCIO7
7
VCCIO7
7
7
G5
VCCIO7
7
VCCIO7
VCCIO
VCCIO7
7
VCCIO7
7
T15
VCCIO8
8
VCCIO8
8
VCCIO
VCCIO8
8
VCCIO8
8
G8
VCCAUX
-
VCCAUX
-
H10
VCCAUX
-
VCCAUX
-
J7
VCCAUX
-
VCCAUX
-
K9
VCCAUX
-
VCCAUX
-
A1
GND
-
GND
-
A15
GND
-
GND
-
A16
GND
-
GND
-
A3
GND
-
GND
-
A9
GND
-
GND
-
B12
GND
-
GND
-
B6
GND
-
GND
-
E15
GND
-
GND
-
E2
GND
-
GND
-
H14
GND
-
GND
-
4-139
Dual
Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M-20E/SE and LFE2M-35E/SE Logic Signal Connections: 256 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
H8
GND
-
Dual Function
LFE2M35E/SE
Differential
Ball/Pad
Function
Bank
GND
-
H9
GND
-
GND
-
J3
GND
-
GND
-
J8
GND
-
GND
-
J9
GND
-
GND
-
M15
GND
-
GND
-
M2
GND
-
GND
-
P9
GND
-
GND
R12
GND
-
GND
-
R5
GND
-
GND
-
T1
GND
-
GND
T16
GND
-
GND
-
D10
NC
-
NC
-
D11
NC
-
NC
-
D12
NC
-
NC
-
D13
NC
-
NC
-
D14
NC
-
NC
-
D4
NC
-
NC
-
D5
NC
-
NC
-
D6
NC
-
NC
-
D7
NC
-
NC
-
E11
NC
-
NC
-
E6
NC
-
NC
-
E8
NC
-
NC
-
E9
NC
-
NC
-
F10
NC
-
NC
-
F7
NC
-
NC
-
F8
NC
-
NC
-
F9
NC
-
NC
-
Dual
Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
***Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-140
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
D1
PL2A
7
LDQ6
Bank
Dual Function
T (LVDS)*
PL2A
7
LDQ6
E1
PL2B
7
LDQ6
T (LVDS)*
C (LVDS)*
PL2B
7
LDQ6
C (LVDS)*
F1
PL3A
7
LDQ6
T
PL3A
7
LDQ6
T
F2
PL3B
7
LDQ6
C
PL3B
7
LDQ6
C
LDQ6
T (LVDS)*
PL4A
7
LDQ6
T (LVDS)*
VCCIO7
7
C (LVDS)*
Differential
F5
PL4A
7
VCCIO
VCCIO7
7
G6
PL4B
7
LDQ6
C (LVDS)*
PL4B
7
LDQ6
F4
PL5A
7
LDQ6
T
PL5A
7
LDQ6
T
F3
PL5B
7
LDQ6
C
PL5B
7
LDQ6
C
LDQS6
T (LVDS)*
PL6A
7
LDQS6
T (LVDS)*
GNDIO7
C (LVDS)*
G1
PL6A
7
GNDIO
GNDIO7
-
G2
PL6B
7
LDQ6
C (LVDS)*
PL6B
7
LDQ6
H1
PL7A
7
LDQ6
T
PL7A
7
LDQ6
T
H2
PL7B
7
LDQ6
C
PL7B
7
LDQ6
C
VCCIO
VCCIO7
7
VCCIO7
7
H7
PL8A
7
LDQ6
T (LVDS)*
PL8A
7
LDQ6
T (LVDS)*
H6
PL8B
7
LDQ6
C (LVDS)*
PL8B
7
LDQ6
C (LVDS)*
G3
PL9A
7
VREF2_7/LDQ6
T
PL9A
7
VREF2_7/LDQ6
T
H3
PL9B
7
VREF1_7/LDQ6
C
PL9B
7
VREF1_7/LDQ6
C
GNDIO
GNDIO7
-
GNDIO7
-
H5
PL11A
7
LUM0_SPLLT_IN_A
T (LVDS)*
PL11A
7
LUM0_SPLLT_IN_A/LDQ15
T (LVDS)*
H4
PL11B
7
LUM0_SPLLC_IN_A
C (LVDS)*
PL11B
7
LUM0_SPLLC_IN_A/LDQ15
C (LVDS)*
J1
PL12A
7
LUM0_SPLLT_FB_A
T
PL12A
7
LUM0_SPLLT_FB_A/LDQ15
T
J2
PL12B
7
LUM0_SPLLC_FB_A
C
PL12B
7
LUM0_SPLLC_FB_A/LDQ15
C
PL13A
7
LDQ15
T (LVDS)*
VCCIO7
7
C (LVDS)*
J3
PL13A
7
VCCIO
VCCIO7
7
T (LVDS)*
J4
PL13B
7
C (LVDS)*
PL13B
7
LDQ15
J7
PL14A
7
T
PL14A
7
LDQ15
T
J6
PL14B
7
C
PL14B
7
LDQ15
C
GNDIO
GNDIO7
-
GNDIO7
-
VCCIO
VCCIO7
7
VCCIO7
7
K1
PL18A
7
LUM1_SPLLT_IN_A/LDQ22
T (LVDS)*
PL28A
7
LUM1_SPLLT_IN_A/LDQ32
T (LVDS)*
K2
PL18B
7
LUM1_SPLLC_IN_A/LDQ22
C (LVDS)*
PL28B
7
LUM1_SPLLC_IN_A/LDQ32
C (LVDS)*
J5
PL19A
7
LUM1_SPLLT_FB_A/LDQ22
T
PL29A
7
LUM1_SPLLT_FB_A/LDQ32
T
K5
PL19B
7
LUM1_SPLLC_FB_A/LDQ22
C
PL29B
7
LUM1_SPLLC_FB_A/LDQ32
C
VCCIO
VCCIO7
7
VCCIO7
7
K7
PL20A
7
LDQ22
T (LVDS)*
PL30A
7
LDQ32
T (LVDS)*
K6
PL20B
7
LDQ22
C (LVDS)*
PL30B
7
LDQ32
C (LVDS)*
L6
PL21A
7
LDQ22
T
PL31A
7
LDQ32
T
L7
PL21B
7
LDQ22
C
PL31B
7
LDQ32
C
GNDIO
GNDIO7
-
GNDIO7
-
L1
PL22A
7
LDQS22
T (LVDS)*
PL32A
7
LDQS32
T (LVDS)*
L2
PL22B
7
LDQ22
C (LVDS)*
PL32B
7
LDQ32
C (LVDS)*
LDQ22
T
LDQ32
T
M7
PL23A
7
VCCIO
VCCIO7
7
L5
PL23B
7
LDQ22
L3
PL24A
7
LDQ22
L4
PL24B
7
LDQ22
M1
PL25A
7
PCLKT7_0/LDQ22
PL33A
7
VCCIO7
7
C
PL33B
7
LDQ32
C
T (LVDS)*
PL34A
7
LDQ32
T (LVDS)*
C (LVDS)*
PL34B
7
LDQ32
C (LVDS)*
T
PL35A
7
PCLKT7_0/LDQ32
T
4-141
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
GNDIO
GNDIO7
-
M2
PL25B
7
PCLKC7_0/LDQ22
M6
PL27A
6
PCLKT6_0
M5
PL27B
6
PCLKC6_0
C (LVDS)*
M3
PL28A
6
VREF2_6
T
M4
PL28B
6
VREF1_6
C
VCCIO
VCCIO6
6
N7
PL31A
6
LLM1_SPLLT_IN_A
T (LVDS)*
GNDIO
GNDIO6
-
N6
PL31B
6
LLM1_SPLLC_IN_A
C (LVDS)*
PL41B
N1
PL32A
6
LLM1_SPLLT_FB_A
T
PL42A
N2
PL32B
6
LLM1_SPLLC_FB_A
C
PL42B
6
6
Dual Function
Ball/Pad
Function
Bank
GNDIO7
-
C
PL35B
7
PCLKC7_0/LDQ32
C
T (LVDS)*
PL37A
6
PCLKT6_0
T (LVDS)*
PL37B
6
PCLKC6_0
C (LVDS)*
PL38A
6
VREF2_6
T
PL38B
6
VREF1_6
C
VCCIO6
6
PL41A
6
LLM2_SPLLT_IN_A
T (LVDS)*
GNDIO6
6
LLM2_SPLLC_IN_A
C (LVDS)*
6
LLM2_SPLLT_FB_A
T
LLM2_SPLLC_FB_A
C
Differential
Dual Function
Differential
VCCIO
VCCIO6
6
VCCIO6
GNDIO
GNDIO6
-
GNDIO6
-
P6
PL38A
6
LDQS38****
T (LVDS)*
PL48A
6
LDQS48****
T (LVDS)*
N5
PL38B
6
LDQ38
C (LVDS)*
PL48B
6
LDQ48
C (LVDS)*
LDQ38
T
LDQ48
T
P1
PL39A
6
VCCIO
VCCIO6
6
PL49A
6
VCCIO6
6
P2
PL39B
6
LDQ38
P3
PL40A
6
LDQ38
C
PL49B
6
LDQ48
C
T (LVDS)*
PL50A
6
LDQ48
T (LVDS)*
P4
PL40B
6
LDQ38
C (LVDS)*
PL50B
P5
PL41A
6
LDQ38
T
PL51A
6
LDQ48
C (LVDS)*
6
LDQ48
GNDIO
GNDIO6
-
GNDIO6
-
T
P7
PL41B
6
LDQ38
C
PL51B
6
LDQ48
C
R1
PL42A
6
LLM0_GPLLT_IN_A**
T (LVDS)*
PL57A
6
LLM0_GPLLT_IN_A**/LDQS57****
T (LVDS)*
GNDIO
GNDIO6
-
GNDIO6
-
R2
PL42B
6
LLM0_GPLLC_IN_A**
C (LVDS)*
PL57B
6
LLM0_GPLLC_IN_A**/LDQ57
C (LVDS)*
R3
PL43A
6
LLM0_GPLLT_FB_A
T
PL58A
6
LLM0_GPLLT_FB_A/LDQ57
T
R4
PL43B
6
LLM0_GPLLC_FB_A
C
PL58B
6
LLM0_GPLLC_FB_A/LDQ57
C
VCCIO
VCCIO6
6
VCCIO6
6
R6
PL44A
6
LLM0_GDLLT_IN_A**
T (LVDS)*
PL59A
6
LLM0_GDLLT_IN_A**/LDQ57
T (LVDS)*
R5
PL44B
6
LLM0_GDLLC_IN_A**
C (LVDS)*
PL59B
6
LLM0_GDLLC_IN_A**/LDQ57
C (LVDS)*
T1
PL45A
6
LLM0_GDLLT_FB_A
T
PL60A
6
LLM0_GDLLT_FB_A/LDQ57
T
T2
PL45B
6
LLM0_GDLLC_FB_A
C
PL60B
6
LLM0_GDLLC_FB_A/LDQ57
C
GNDIO
GNDIO6
-
GNDIO6
-
R7
LLM0_PLLCAP
6
LLM0_PLLCAP
6
T6
PL47A
6
LDQ51
T (LVDS)*
PL62A
6
LDQ66
T (LVDS)*
T7
PL47B
6
LDQ51
C (LVDS)*
PL62B
6
LDQ66
C (LVDS)*
U1
PL48A
6
LDQ51
T
PL63A
6
LDQ66
T
U2
PL48B
6
LDQ51
C
PL63B
6
LDQ66
C
VCCIO
VCCIO6
6
VCCIO6
6
T3
PL49A
6
LDQ51
T (LVDS)*
PL64A
6
LDQ66
T (LVDS)*
U3
PL49B
6
LDQ51
C (LVDS)*
PL64B
6
LDQ66
C (LVDS)*
U6
PL50A
6
LDQ51
T
NC
-
U5
PL50B
6
LDQ51
C
PL65B
6
LDQ66
C
GNDIO
GNDIO6
-
GNDIO6
-
V5
PL51A
6
LDQS51
T (LVDS)*
PL66A
6
LDQS66
T (LVDS)*
U4
PL51B
6
LDQ51
C (LVDS)*
PL66B
6
LDQ66
C (LVDS)*
V1
PL52A
6
LDQ51
T
PL67A
6
LDQ66
T
4-142
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO6
6
LFE2M35E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
VCCIO6
6
Dual Function
Differential
V3
PL52B
6
LDQ51
C
PL67B
6
LDQ66
C
W1
PL53A
6
LDQ51
T (LVDS)*
PL68A
6
LDQ66
T (LVDS)*
Y1
PL53B
6
LDQ51
C (LVDS)*
PL68B
6
LDQ66
C (LVDS)*
AA1
PL54A
6
LDQ51
T
PL69A
6
LDQ66
T
GNDIO
GNDIO6
-
GNDIO6
-
AA2
PL54B
6
PL69B
6
LDQ66
C
V4
TCK
-
TCK
-
Y2
TDI
-
TDI
-
Y3
TMS
-
TMS
-
W3
TDO
-
TDO
-
W4
VCCJ
-
VCCJ
-
LDQ51
C
W5
PB2A
5
BDQ6
T
PB2A
5
BDQ6
T
Y4
PB2B
5
BDQ6
C
PB2B
5
BDQ6
C
W6
PB3A
5
BDQ6
T
PB3A
5
BDQ6
T
V6
PB3B
5
BDQ6
C
PB3B
5
BDQ6
C
BDQ6
T
BDQ6
T
C
AA3
PB4A
5
VCCIO
VCCIO5
5
PB4A
5
VCCIO5
5
AB2
PB4B
5
BDQ6
T8
PB5A
5
BDQ6
C
PB4B
5
BDQ6
T
PB5A
5
BDQ6
U7
PB5B
5
T
BDQ6
C
PB5B
5
BDQ6
C
U8
PB6A
5
GNDIO
GNDIO5
-
BDQS6
T
PB6A
5
BDQS6
T
GNDIO5
C
T9
PB6B
5
BDQ6
C
PB6B
5
BDQ6
V8
PB7A
5
BDQ6
T
PB7A
5
BDQ6
T
W8
PB7B
5
BDQ6
C
PB7B
5
BDQ6
C
BDQ6
T
BDQ6
T
C
Y6
PB8A
5
VCCIO
VCCIO5
5
PB8A
5
VCCIO5
5
Y5
PB8B
5
BDQ6
C
PB8B
5
BDQ6
AB3
PB9A
5
BDQ6
T
PB9A
5
BDQ6
T
AB4
PB9B
5
BDQ6
C
PB9B
5
BDQ6
C
AB5
PB10A
5
BDQ6
T
BDQ6
T
GNDIO
GNDIO5
-
C
PB10A
5
GNDIO5
-
AA6
PB10B
5
BDQ6
C
PB10B
5
BDQ6
V9
PB13A
5
BDQ15
T
PB31A
5
BDQ33
T
U9
PB13B
5
BDQ15
C
PB31B
5
BDQ33
C
VCCIO
VCCIO5
5
VCCIO5
5
-
-
-
GNDIO5
-
U10
PB14A
5
BDQ15
T
PB32A
5
BDQ33
T
T10
PB14B
5
BDQ15
C
PB32B
5
BDQ33
C
GNDIO
GNDIO5
-
GNDIO5
-
W9
PB15A
5
BDQS15****
T
PB33A
5
BDQS33****
T
Y8
PB15B
5
BDQ15
C
PB33B
5
BDQ33
C
AA7
PB16A
5
VREF2_5/BDQ15
T
PB34A
5
VREF2_5/BDQ33
T
Y7
PB16B
5
VREF1_5/BDQ15
C
PB34B
5
VREF1_5/BDQ33
C
AB6
PB17A
5
PCLKT5_0/BDQ15
T
PB35A
5
PCLKT5_0/BDQ33
T
AB7
PB17B
5
PCLKC5_0/BDQ15
C
PB35B
5
PCLKC5_0/BDQ33
C
VCCIO
VCCIO5
5
VCCIO5
5
GNDIO
GNDIO5
-
GNDIO5
-
4-143
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AA8
PB22A
4
PCLKT4_0/BDQ24
Bank
Dual Function
Differential
T
PB40A
4
PCLKT4_0/BDQ42
VCCIO
VCCIO4
4
T
VCCIO4
4
AB8
PB22B
4
PCLKC4_0/BDQ24
AA9
PB23A
4
VREF2_4/BDQ24
C
PB40B
4
PCLKC4_0/BDQ42
C
T
PB41A
4
VREF2_4/BDQ42
Y9
PB23B
4
T
VREF1_4/BDQ24
C
PB41B
4
VREF1_4/BDQ42
C
BDQS24****
T
BDQS42****
T
C
AB9
PB24A
4
GNDIO
GNDIO4
-
AB10
PB24B
4
BDQ24
AA10
PB25A
4
BDQ24
Y11
PB25B
4
BDQ24
PB42A
4
GNDIO4
-
C
PB42B
4
BDQ42
T
PB43A
4
BDQ42
T
C
PB43B
4
BDQ42
C
4
VCCIO
VCCIO4
4
VCCIO4
GNDIO
GNDIO4
-
GNDIO4
-
V10
PB29A
4
BDQ33
T
PB47A
4
BDQ51
T
U11
PB29B
4
BDQ33
C
PB47B
4
BDQ51
C
V11
PB30A
4
BDQ33
T
PB48A
4
BDQ51
T
W11
PB30B
4
BDQ33
C
PB48B
4
BDQ51
C
AA11
PB31A
4
BDQ33
T
PB49A
4
BDQ51
T
AB11
PB31B
4
BDQ33
C
PB49B
4
BDQ51
C
VCCIO
VCCIO4
4
VCCIO4
4
T11
PB32A
4
BDQ33
T
PB50A
4
BDQ51
T
U12
PB32B
4
BDQ33
C
PB50B
4
BDQ51
C
GNDIO
GNDIO4
-
GNDIO4
-
AA12
PB33A
4
BDQS33
T
PB51A
4
BDQS51
T
Y12
PB33B
4
BDQ33
C
PB51B
4
BDQ51
C
V12
PB34A
4
BDQ33
T
PB52A
4
BDQ51
T
W12
PB34B
4
BDQ33
C
PB52B
4
BDQ51
C
AB12
PB35A
4
BDQ33
T
PB53A
4
BDQ51
T
AA13
PB35B
4
BDQ33
C
PB53B
4
BDQ51
C
VCCIO
VCCIO4
4
VCCIO4
4
T12
PB36A
4
BDQ33
T
PB54A
4
BDQ51
T
U13
PB36B
4
BDQ33
C
PB54B
4
BDQ51
C
V13
PB37A
4
BDQ33
T
PB55A
4
BDQ51
T
T13
PB37B
4
BDQ33
C
PB55B
4
BDQ51
C
GNDIO
GNDIO4
-
GNDIO4
-
AB13
PB38A
4
BDQ42
T
PB56A
4
BDQ60
T
AB14
PB38B
4
BDQ42
C
PB56B
4
BDQ60
C
U14
PB39A
4
BDQ42
T
PB57A
4
BDQ60
T
T14
PB39B
4
BDQ42
C
PB57B
4
BDQ60
C
BDQ42
T
BDQ60
T
C
AA14
PB40A
4
VCCIO
VCCIO4
4
PB58A
4
VCCIO4
4
Y14
PB40B
4
BDQ42
C
PB58B
4
BDQ60
W14
PB41A
4
BDQ42
T
PB59A
4
BDQ60
T
V14
PB41B
4
BDQ42
C
PB59B
4
BDQ60
C
BDQS42
T
BDQS60
T
C
AB15
PB42A
4
GNDIO
GNDIO4
-
PB60A
4
GNDIO4
-
AA15
PB42B
4
BDQ42
V15
PB43A
4
BDQ42
C
PB60B
4
BDQ60
T
PB61A
4
BDQ60
U15
PB43B
4
T
BDQ42
C
PB61B
4
BDQ60
C
AB16
PB44A
4
BDQ42
T
PB62A
4
BDQ60
T
4-144
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Ball/Pad
Function
Bank
VCCIO
VCCIO4
4
Bank
VCCIO4
4
AA16
PB44B
4
BDQ42
AB17
PB45A
4
BDQ42
C
PB62B
T
PB63A
AA17
PB45B
4
BDQ42
C
Y15
PB46A
4
GNDIO
GNDIO4
-
BDQ42
T
Dual Function
Differential
Dual Function
Differential
4
BDQ60
C
4
BDQ60
T
PB63B
4
BDQ60
C
PB64A
4
BDQ60
T
GNDIO4
C
W15
PB46B
4
BDQ42
C
PB64B
4
BDQ60
AB20
PB47A
4
BDQ51
T
PB65A
4
BDQ69
T
AB21
PB47B
4
BDQ51
C
PB65B
4
BDQ69
C
AA21
PB48A
4
BDQ51
T
PB66A
4
BDQ69
T
AA20
PB48B
4
BDQ51
C
PB66B
4
BDQ69
C
AB19
PB49A
4
BDQ51
T
PB67A
4
BDQ69
T
AB18
PB49B
4
BDQ51
C
PB67B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
Y22
PB50A
4
BDQ51
T
PB68A
4
BDQ69
T
Y21
PB50B
4
BDQ51
C
PB68B
4
BDQ69
C
GNDIO
GNDIO4
-
GNDIO4
-
Y17
PB51A
4
BDQS51
T
PB69A
4
BDQS69
T
Y18
PB51B
4
BDQ51
C
PB69B
4
BDQ69
C
Y16
PB52A
4
BDQ51
T
PB70A
4
BDQ69
T
W17
PB52B
4
BDQ51
C
PB70B
4
BDQ69
C
Y19
PB53A
4
BDQ51
T
PB71A
4
BDQ69
T
Y20
PB53B
4
BDQ51
C
PB71B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
W19
PB54A
4
BDQ51
T
PB72A
4
BDQ69
T
W18
PB54B
4
BDQ51
C
PB72B
4
BDQ69
C
V17
PB55A
4
BDQ51
T
PB73A
4
BDQ69
T
V18
PB55B
4
BDQ51
C
PB73B
4
BDQ69
C
GNDIO
GNDIO4
-
GNDIO4
-
W20
CFG2
8
CFG2
8
V20
CFG1
8
CFG1
8
V19
CFG0
8
CFG0
8
V22
PROGRAMN
8
PROGRAMN
8
W22
CCLK
8
CCLK
8
C
U18
INITN
8
INITN
8
U22
DONE
8
DONE
8
GNDIO
GNDIO8
-
GNDIO8
-
U20
PR53B
8
WRITEN***
C
PR68B
8
WRITEN***
U21
PR53A
8
CS1N***
T
PR68A
8
CS1N***
T
U17
PR52B
8
CSN***
C
PR67B
8
CSN***
C
D0/SPIFASTN***
T
PR67A
8
D0/SPIFASTN***
T
VCCIO8
8
C
U16
PR52A
8
VCCIO
VCCIO8
8
T16
PR51B
8
D1***
C
PR66B
8
D1***
T17
PR51A
8
D2***
T
PR66A
8
D2***
T
T22
PR50B
8
D3***
C
PR65B
8
D3***
C
GNDIO
GNDIO8
-
GNDIO8
-
R22
PR50A
8
D4***
T
PR65A
8
D4***
T
T15
PR49B
8
D5***
C
PR64B
8
D5***
C
R17
PR49A
8
D6***
T
PR64A
8
D6***
T
4-145
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
T20
PR48B
8
D7***
VCCIO
VCCIO8
8
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
C
PR63B
8
D7***
C
VCCIO8
8
T21
PR48A
8
DI/CSSPI0N***
T
PR63A
8
DI/CSSPI0N***
T
R21
PR47B
8
DOUT/CSON/CSSPI1N***
C
PR62B
8
DOUT/CSON/CSSPI1N***
C
R20
PR47A
8
BUSY/SISPI***
T
BUSY/SISPI***
T
R16
RLM0_PLLCAP
3
RLM0_GDLLC_FB_A/RDQ57
C
RLM0_GDLLC_FB_A
C
PR62A
8
RLM0_PLLCAP
3
R18
PR45B
3
GNDIO
GNDIO3
-
PR60B
3
GNDIO3
-
R19
PR45A
3
RLM0_GDLLT_FB_A
P22
PR44B
3
RLM0_GDLLC_IN_A**
T
PR60A
3
RLM0_GDLLT_FB_A/RDQ57
T
C (LVDS)*
PR59B
3
RLM0_GDLLC_IN_A**/RDQ57
C (LVDS)*
P21
PR44A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
PR59A
P16
PR43B
3
RLM0_GPLLC_IN_A**
C
PR58B
3
RLM0_GDLLT_IN_A**/RDQ57
T (LVDS)*
3
RLM0_GPLLC_IN_A**/RDQ57
VCCIO
VCCIO3
3
VCCIO3
3
C
P17
PR43A
3
RLM0_GPLLT_IN_A**
T
PR58A
3
RLM0_GPLLT_IN_A**/RDQ57
T
P20
PR42B
3
RLM0_GPLLC_FB_A
C (LVDS)*
PR57B
3
RLM0_GPLLC_FB_A/RDQ57
C (LVDS)*
P19
PR42A
3
RLM0_GPLLT_FB_A
T (LVDS)*
PR57A
3
RLM0_GPLLT_FB_A/RDQS57****
T (LVDS)*
GNDIO
GNDIO3
-
GNDIO3
-
-
-
-
VCCIO3
3
P18
PR41B
3
RDQ38
C
PR51B
3
RDQ48
C
N16
PR41A
3
RDQ38
T
PR51A
3
RDQ48
T
GNDIO
GNDIO3
-
GNDIO3
-
N22
PR40B
3
RDQ38
C (LVDS)*
PR50B
3
RDQ48
C (LVDS)*
N21
PR40A
3
RDQ38
T (LVDS)*
PR50A
3
RDQ48
T (LVDS)*
N17
PR39B
3
RDQ38
C
PR49B
3
RDQ48
C
N18
PR39A
3
RDQ38
T
PR49A
3
RDQ48
T
VCCIO
VCCIO3
3
VCCIO3
3
M22
PR38B
3
RDQ38
C (LVDS)*
PR48B
3
RDQ48
C (LVDS)*
M21
PR38A
3
RDQS38
T (LVDS)*
PR48A
3
RDQS48
T (LVDS)*
M16
PR37B
3
RDQ38
C
PR47B
3
RDQ48
C
GNDIO
GNDIO3
-
GNDIO3
-
M17
PR37A
3
RDQ38
T
PR47A
3
RDQ48
T
M20
PR36B
3
RDQ38
C (LVDS)*
PR46B
3
RDQ48
C (LVDS)*
M19
PR36A
3
RDQ38
T (LVDS)*
PR46A
3
RDQ48
T (LVDS)*
M18
PR35B
3
RDQ38
C
PR45B
3
RDQ48
C
VCCIO
VCCIO3
3
VCCIO3
3
L16
PR35A
3
RDQ38
T
PR45A
3
RDQ48
T
L22
PR34B
3
RDQ38
C (LVDS)*
PR44B
3
RDQ48
C (LVDS)*
L21
PR34A
3
RDQ38
T (LVDS)*
PR44A
3
RDQ48
T (LVDS)*
K22
PR32B
3
RLM1_SPLLC_FB_A
C
PR42B
3
RLM2_SPLLC_FB_A
C
VCCIO
VCCIO3
3
VCCIO3
3
K21
PR32A
3
RLM1_SPLLT_FB_A
T
PR42A
3
RLM2_SPLLT_FB_A
T
L17
PR31B
3
RLM1_SPLLC_IN_A
C (LVDS)*
PR41B
3
RLM2_SPLLC_IN_A
C (LVDS)*
RLM1_SPLLT_IN_A
T (LVDS)*
RLM2_SPLLT_IN_A
T (LVDS)*
L18
PR31A
3
GNDIO
GNDIO3
-
PR41A
3
GNDIO3
-
L20
PR30B
3
L19
PR30A
3
C
PR40B
3
T
PR40A
3
K16
PR29B
T
3
C (LVDS)*
PR39B
3
C (LVDS)*
K17
VCCIO
PR29A
3
T (LVDS)*
PR39A
3
T (LVDS)*
VCCIO3
3
VCCIO3
3
4-146
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
J16
PR28B
3
VREF2_3
Bank
Dual Function
Differential
C
PR38B
3
VREF2_3
K18
PR28A
3
C
VREF1_3
T
PR38A
3
VREF1_3
J22
PR27B
3
T
PCLKC3_0
C (LVDS)*
PR37B
3
PCLKC3_0
C (LVDS)*
J21
PR27A
3
PCLKT3_0
T (LVDS)*
PR37A
3
PCLKT3_0
T (LVDS)*
H22
PR25B
2
PCLKC2_0/RDQ22
C
PR35B
2
PCLKC2_0/RDQ32
C
H21
PR25A
2
PCLKT2_0/RDQ22
T
PR35A
2
PCLKT2_0/RDQ32
T
GNDIO
GNDIO2
-
GNDIO2
-
J17
PR24B
2
RDQ22
C (LVDS)*
PR34B
2
RDQ32
C (LVDS)*
J18
PR24A
2
RDQ22
T (LVDS)*
PR34A
2
RDQ32
T (LVDS)*
J20
PR23B
2
RDQ22
C
PR33B
2
RDQ32
C
J19
PR23A
2
RDQ22
T
PR33A
2
RDQ32
T
VCCIO
VCCIO2
2
VCCIO2
2
H16
PR22B
2
RDQ22
C (LVDS)*
PR32B
2
RDQ32
C (LVDS)*
H17
PR22A
2
RDQS22
T (LVDS)*
PR32A
2
RDQS32
T (LVDS)*
G22
PR21B
2
RDQ22
C
PR31B
2
RDQ32
C
GNDIO
GNDIO2
-
GNDIO2
-
G21
PR21A
2
RDQ22
T
PR31A
2
RDQ32
T
H20
PR20B
2
RDQ22
C (LVDS)*
PR30B
2
RDQ32
C (LVDS)*
H19
PR20A
2
RDQ22
T (LVDS)*
PR30A
2
RDQ32
T (LVDS)*
G16
PR19B
2
RUM1_SPLLC_FB_A/RDQ22
C
PR29B
2
RUM1_SPLLC_FB_A/RDQ32
C
VCCIO
VCCIO2
2
VCCIO2
2
H18
PR19A
2
RUM1_SPLLT_FB_A/RDQ22
T
PR29A
2
RUM1_SPLLT_FB_A/RDQ32
T
F22
PR18B
2
RUM1_SPLLC_IN_A/RDQ22
C (LVDS)*
PR28B
2
RUM1_SPLLC_IN_A/RDQ32
C (LVDS)*
F21
PR18A
2
RUM1_SPLLT_IN_A/RDQ22
T (LVDS)*
PR28A
2
RUM1_SPLLT_IN_A/RDQ32
T (LVDS)*
GNDIO
GNDIO2
-
-
-
PR26B
2
RDQ23
C
-
-
PR26A
2
RDQ23
T
GNDIO2
-
G20
PR16B
2
VCCIO
VCCIO2
2
F20
PR16A
2
-
-
-
C
T
G17
PR15B
2
C (LVDS)*
PR25B
2
RDQ23
C (LVDS)*
F17
PR15A
2
T (LVDS)*
PR25A
2
RDQ23
T (LVDS)*
-
-
-
VCCIO2
2
GNDIO
GNDIO2
-
GNDIO2
-
E22
PR14B
2
C
PR14B
2
RDQ15
C
D22
PR14A
2
T
PR14A
2
RDQ15
T
E20
PR13B
2
C (LVDS)*
PR13B
2
RDQ15
C (LVDS)*
D20
PR13A
2
T (LVDS)*
PR13A
2
RDQ15
T (LVDS)*
VCCIO
VCCIO2
2
VCCIO2
2
C
D19
PR12B
2
RUM0_SPLLC_FB_A
C
PR12B
2
RUM0_SPLLC_FB_A/RDQ15
E19
PR12A
2
RUM0_SPLLT_FB_A
T
PR12A
2
RUM0_SPLLT_FB_A/RDQ15
T
F18
PR11B
2
RUM0_SPLLC_IN_A
C (LVDS)*
PR11B
2
RUM0_SPLLC_IN_A/RDQ15
C (LVDS)*
F19
PR11A
2
RUM0_SPLLT_IN_A
T (LVDS)*
PR11A
2
RUM0_SPLLT_IN_A/RDQ15
T (LVDS)*
E18
PR9B
2
VREF2_2
C
PR9B
2
VREF2_2
C
GNDIO
GNDIO2
-
GNDIO2
-
D18
PR9A
2
PR9A
2
VREF1_2
T
VCCIO
VCCIO2
2
-
-
VREF1_2
T
F16
XRES
-
XRES
-
C22
URC_SQ_VCCRX0
12
URC_SQ_VCCRX0
12
A21
URC_SQ_HDINP0
12
URC_SQ_HDINP0
12
T
4-147
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
B22
URC_SQ_VCCIB0
12
B21
URC_SQ_HDINN0
12
C19
URC_SQ_VCCTX0
12
A18
URC_SQ_HDOUTP
0
12
A19
URC_SQ_VCCOB0
B18
URC_SQ_HDOUTN
0
C18
URC_SQ_VCCTX1
12
B17
URC_SQ_HDOUTN
1
12
C17
URC_SQ_VCCOB1
A17
URC_SQ_HDOUTP
1
C21
URC_SQ_VCCRX1
12
B20
URC_SQ_HDINN1
12
C20
URC_SQ_VCCIB1
12
A20
URC_SQ_HDINP1
12
B16
URC_SQ_VCCAUX
33
12
E17
URC_SQ_REFCLK
N
12
D17
URC_SQ_REFCLK
P
12
C16
URC_SQ_VCCP
12
A12
URC_SQ_HDINP2
12
C12
URC_SQ_VCCIB2
12
Dual Function
LFE2M35E/SE
Differential
Bank
URC_SQ_VCCIB0
12
URC_SQ_HDINN0
12
URC_SQ_VCCTX0
12
T
URC_SQ_HDOUTP
0
12
12
URC_SQ_VCCOB0
12
12
C
URC_SQ_HDOUTN
0
12
URC_SQ_VCCTX1
12
C
URC_SQ_HDOUTN
1
12
12
URC_SQ_VCCOB1
12
12
T
URC_SQ_HDOUTP
1
12
URC_SQ_VCCRX1
12
B12
URC_SQ_HDINN2
12
C11
URC_SQ_VCCRX2
12
A15
URC_SQ_HDOUTP
2
12
C15
URC_SQ_VCCOB2
B15
URC_SQ_HDOUTN
2
C14
URC_SQ_VCCTX2
B14
URC_SQ_HDOUTN
3
A13
URC_SQ_VCCOB3
12
A14
URC_SQ_HDOUTP
3
12
C13
URC_SQ_VCCTX3
12
B11
URC_SQ_HDINN3
12
B10
URC_SQ_VCCIB3
12
C
Ball/Pad
Function
C
T
URC_SQ_HDINN1
12
URC_SQ_VCCIB1
12
T
C
URC_SQ_REFCLK
N
12
C
T
URC_SQ_REFCLK
P
12
T
URC_SQ_VCCP
12
T
URC_SQ_HDINP2
12
URC_SQ_VCCIB2
12
URC_SQ_HDOUTP
2
12
12
URC_SQ_VCCOB2
12
12
C
URC_SQ_HDOUTN
2
12
12
URC_SQ_VCCTX2
12
12
C
URC_SQ_HDOUTN
3
12
URC_SQ_VCCOB3
12
URC_SQ_HDOUTP
3
12
URC_SQ_VCCTX3
12
URC_SQ_HDINN3
12
URC_SQ_VCCIB3
12
12
C
C
T
12
C
12
12
URC_SQ_HDINP3
T
12
12
URC_SQ_VCCRX3
C
URC_SQ_HDINP1
URC_SQ_HDINN2
A11
Differential
URC_SQ_VCCAUX
33
URC_SQ_VCCRX2
C10
Dual Function
C
T
C
T
URC_SQ_HDINP3
12
URC_SQ_VCCRX3
12
T
T
C
T
C
C
T
C
T
E13
PT28B
1
C
PT46B
1
C
D12
PT28A
1
T
PT46A
1
T
GNDIO
GNDIO1
-
GNDIO1
-
A9
PT27B
1
C
PT45B
1
A8
PT27A
1
T
PT45A
1
T
A7
PT26B
1
C
PT44B
1
C
T
T
A6
PT26A
1
VCCIO
VCCIO1
1
E12
PT25B
1
C
4-148
PT44A
1
VCCIO1
1
PT43B
1
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
F12
PT25A
1
A5
PT24B
LFE2M35E/SE
Differential
Ball/Pad
Function
Bank
T
PT43A
1
T
1
C
PT42B
1
C
T
T
A4
PT24A
1
GNDIO
GNDIO1
-
B7
PT23B
1
B8
PT23A
1
G11
PT22B
Dual Function
Dual Function
Differential
PT42A
1
GNDIO1
-
C
PT41B
1
T
PT41A
1
T
1
C
PT40B
1
C
T
T
E11
PT22A
1
VCCIO
VCCIO1
1
D11
PT21B
1
VREF2_1
D10
PT21A
1
VREF1_1
F11
PT20A
1
PCLKT1_0
C
PT40A
1
VCCIO1
1
C
PT39B
1
VREF2_1
T
PT39A
1
VREF1_1
T
T
PT38A
1
PCLKC1_0
C
C
G10
PT20B
1
PCLKC1_0
C
PT38B
1
PCLKT1_0
T
G9
PT19B
0
PCLKC0_0
C
PT37B
0
PCLKC0_0
C
GNDIO
GNDIO0
-
GNDIO0
-
F9
PT19A
0
PCLKT0_0
T
PT37A
0
PCLKT0_0
T
C9
PT18B
0
VREF2_0
C
PT36B
0
VREF2_0
C
VREF1_0
VREF1_0
D9
PT18A
0
A2
PT17B
0
T
PT36A
0
C
PT35B
0
T
VCCIO
VCCIO0
0
VCCIO0
0
A3
PT17A
0
T
PT35A
0
T
B3
PT16B
0
C
PT34B
0
C
C4
PT16A
0
T
PT34A
0
T
E10
PT15B
0
C
PT33B
0
C
C
F10
PT15A
0
T
PT33A
0
T
C7
PT14B
0
C
PT32B
0
C
GNDIO
GNDIO0
-
GNDIO0
-
B6
PT14A
0
T
PT32A
0
T
C6
PT13B
0
C
PT31B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
C5
PT13A
0
T
PT31A
0
T
C8
PT12B
0
C
PT30B
0
C
D8
PT12A
0
T
PT30A
0
T
E8
PT11B
0
C
PT29B
0
C
E9
PT11A
0
T
PT29A
0
T
-
-
-
GNDIO0
-
-
-
-
VCCIO0
0
F8
PT10B
0
C
PT10B
0
C
G8
PT10A
0
T
PT10A
0
T
GNDIO
GNDIO0
-
GNDIO0
-
F7
PT9B
0
C
PT9B
0
G7
PT9A
0
T
PT9A
0
T
C3
PT8B
0
C
PT8B
0
C
D4
PT8A
0
T
T
VCCIO
VCCIO0
0
PT8A
0
VCCIO0
0
C
F6
PT7B
0
C
PT7B
0
E6
PT7A
0
T
PT7A
0
T
E5
PT6B
0
C
PT6B
0
C
D6
PT6A
0
T
PT6A
0
T
4-149
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
GNDIO
GNDIO0
-
D3
PT5B
0
E3
PT5A
0
D5
PT4B
E4
VCCIO
C2
PT3B
0
B2
PT3A
0
B1
PT2B
C1
R8
H15
H8
LFE2M35E/SE
Ball/Pad
Function
Bank
GNDIO0
-
C
PT5B
0
T
PT5A
0
T
0
C
PT4B
0
C
PT4A
0
T
T
VCCIO0
0
Dual Function
Differential
Dual Function
Differential
C
PT4A
0
VCCIO0
0
C
PT3B
0
T
PT3A
0
T
0
C
PT2B
0
C
PT2A
0
T
PT2A
0
T
VCCPLL
-
VCCPLL
-
VCCPLL
-
VCCPLL
-
VCCPLL
-
VCCPLL
-
R15
VCCPLL
-
VCCPLL
-
J10
VCC
-
VCC
-
J11
VCC
-
VCC
-
J12
VCC
-
VCC
-
J13
VCC
-
VCC
-
K14
VCC
-
VCC
-
K9
VCC
-
VCC
-
L14
VCC
-
VCC
-
L9
VCC
-
VCC
-
M14
VCC
-
VCC
-
M9
VCC
-
VCC
-
N14
VCC
-
VCC
-
N9
VCC
-
VCC
-
P10
VCC
-
VCC
-
P11
VCC
-
VCC
-
P12
VCC
-
VCC
-
P13
VCC
-
VCC
-
B5
VCCIO0
0
VCCIO0
0
B9
VCCIO0
0
VCCIO0
0
E7
VCCIO0
0
VCCIO0
0
H9
VCCIO0
0
VCCIO0
0
D13
VCCIO1
1
VCCIO1
1
E16
VCCIO1
1
VCCIO1
1
H14
VCCIO1
1
VCCIO1
1
E21
VCCIO2
2
VCCIO2
2
G18
VCCIO2
2
VCCIO2
2
J15
VCCIO2
2
VCCIO2
2
K19
VCCIO2
2
VCCIO2
2
N19
VCCIO3
3
VCCIO3
3
P15
VCCIO3
3
VCCIO3
3
T18
VCCIO3
3
VCCIO3
3
V21
VCCIO3
3
VCCIO3
3
AA18
VCCIO4
4
VCCIO4
4
R14
VCCIO4
4
VCCIO4
4
V16
VCCIO4
4
VCCIO4
4
W13
VCCIO4
4
VCCIO4
4
4-150
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
AA5
VCCIO5
5
Dual Function
LFE2M35E/SE
Differential
Ball/Pad
Function
Bank
VCCIO5
5
R9
VCCIO5
5
VCCIO5
5
V7
VCCIO5
5
VCCIO5
5
W10
VCCIO5
5
VCCIO5
5
N4
VCCIO6
6
VCCIO6
6
P8
VCCIO6
6
VCCIO6
6
T5
VCCIO6
6
VCCIO6
6
V2
VCCIO6
6
VCCIO6
6
7
E2
VCCIO7
7
VCCIO7
G5
VCCIO7
7
VCCIO7
7
J8
VCCIO7
7
VCCIO7
7
K4
VCCIO7
7
VCCIO7
7
AA22
VCCIO8
8
VCCIO8
8
U19
VCCIO8
8
VCCIO8
8
H11
VCCAUX
-
VCCAUX
-
H12
VCCAUX
-
VCCAUX
-
L15
VCCAUX
-
VCCAUX
-
L8
VCCAUX
-
VCCAUX
-
M15
VCCAUX
-
VCCAUX
-
M8
VCCAUX
-
VCCAUX
-
R11
VCCAUX
-
VCCAUX
-
R12
VCCAUX
-
VCCAUX
-
A1
GND
-
GND
-
A10
GND
-
GND
-
A16
GND
-
GND
-
A22
GND
-
GND
-
AA19
GND
-
GND
-
AA4
GND
-
GND
-
AB1
GND
-
GND
-
AB22
GND
-
GND
-
B13
GND
-
GND
-
B19
GND
-
GND
-
B4
GND
-
GND
-
D16
GND
-
GND
-
D2
GND
-
GND
-
D21
GND
-
GND
-
D7
GND
-
GND
-
G19
GND
-
GND
-
G4
GND
-
GND
-
H10
GND
-
GND
-
H13
GND
-
GND
-
J14
GND
-
GND
-
J9
GND
-
GND
-
K10
GND
-
GND
-
K11
GND
-
GND
-
K12
GND
-
GND
-
K13
GND
-
GND
-
K15
GND
-
GND
-
K20
GND
-
GND
-
4-151
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M20E/SE and LFE2M35E/SE Logic Signal Connections: 484 fpBGA
LFE2M20E/SE
Ball
Number
Ball/Pad
Function
Bank
K3
GND
LFE2M35E/SE
Ball/Pad
Function
Bank
-
GND
-
Dual Function
Differential
K8
GND
-
GND
-
L10
GND
-
GND
-
L11
GND
-
GND
-
L12
GND
-
GND
-
L13
GND
-
GND
-
M10
GND
-
GND
-
M11
GND
-
GND
-
M12
GND
-
GND
-
M13
GND
-
GND
-
N10
GND
-
GND
-
N11
GND
-
GND
-
N12
GND
-
GND
-
N13
GND
-
GND
-
N15
GND
-
GND
-
N20
GND
-
GND
-
N3
GND
-
GND
-
N8
GND
-
GND
-
P14
GND
-
GND
-
P9
GND
-
GND
-
R10
GND
-
GND
-
R13
GND
-
GND
-
T19
GND
-
GND
-
T4
GND
-
GND
-
W16
GND
-
GND
-
W2
GND
-
GND
-
W21
GND
-
GND
-
W7
GND
-
GND
-
Y10
GND
-
GND
-
Y13
GND
-
GND
-
D15
NC
-
NC
-
G14
NC
-
NC
-
G15
NC
-
NC
-
D14
NC
-
NC
-
E15
NC
-
NC
-
E14
NC
-
NC
-
F15
NC
-
NC
-
F14
NC
-
NC
-
F13
NC
-
NC
-
G12
NC
-
NC
-
G13
NC
-
NC
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
***For density migration, board design must take into account that these sysCONFIG pins are dual function for the lower density devices
(ECP2M20 and ECP2M35) and are dedicated pins for the higher density devices (ECP2M50, ECP2M70 and ECP2M100).
****Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-152
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
D1
PL2A
7
LDQ6
T (LVDS)*
E1
PL2B
7
LDQ6
C (LVDS)*
F1
PL3A
7
LDQ6
T
F2
PL3B
7
LDQ6
C
F5
PL4A
7
LDQ6
T (LVDS)*
VCCIO
VCCIO7
7
G6
PL4B
7
LDQ6
C (LVDS)*
F4
PL5A
7
LDQ6
T
F3
PL5B
7
LDQ6
C
LDQS6
T (LVDS)*
G1
PL6A
7
GNDIO
GNDIO7
-
G2
PL6B
7
LDQ6
C (LVDS)*
H1
PL7A
7
LDQ6
T
LDQ6
C
H2
PL7B
7
VCCIO
VCCIO7
7
H7
PL8A
7
LDQ6
T (LVDS)*
H6
PL8B
7
LDQ6
C (LVDS)*
G3
PL9A
7
VREF2_7/LDQ6
T
H3
PL9B
7
VREF1_7/LDQ6
C
GNDIO
GNDIO7
-
VCCIO
VCCIO7
7
H5
PL11A
7
LUM0_SPLLT_IN_A
T (LVDS)*
H4
PL11B
7
LUM0_SPLLC_IN_A
C (LVDS)*
J1
PL12A
7
LUM0_SPLLT_FB_A
T
J2
PL12B
7
LUM0_SPLLC_FB_A
C
GNDIO
GNDIO7
-
J3
PL13A
7
T (LVDS)*
J4
PL13B
7
C (LVDS)*
J7
PL14A
7
T
VCCIO
VCCIO7
7
J6
PL14B
7
GNDIO
GNDIO7
-
VCCIO
VCCIO7
7
K1
PL32A
7
LUM3_SPLLT_IN_A/LDQ36
T (LVDS)*
K2
PL32B
7
LUM3_SPLLC_IN_A/LDQ36
C (LVDS)*
C
J5
PL33A
7
LUM3_SPLLT_FB_A/LDQ36
T
K5
PL33B
7
LUM3_SPLLC_FB_A/LDQ36
C
VCCIO
VCCIO7
7
K7
PL34A
7
LDQ36
T (LVDS)*
K6
PL34B
7
LDQ36
C (LVDS)*
L6
PL35A
7
LDQ36
T
L7
PL35B
7
LDQ36
C
4-153
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
GNDIO
GNDIO7
-
L1
PL36A
7
LDQS36
T (LVDS)*
L2
PL36B
7
LDQ36
C (LVDS)*
M7
PL37A
7
LDQ36
T
VCCIO
VCCIO7
7
L5
PL37B
7
LDQ36
C
L3
PL38A
7
LDQ36
T (LVDS)*
L4
PL38B
7
LDQ36
C (LVDS)*
PCLKT7_0/LDQ36
T
M1
PL39A
7
GNDIO
GNDIO7
-
M2
PL39B
7
PCLKC7_0/LDQ36
C
M6
PL41A
6
PCLKT6_0
T (LVDS)*
M5
PL41B
6
PCLKC6_0
C (LVDS)*
M3
PL42A
6
VREF2_6
T
M4
PL42B
6
VREF1_6
C
VCCIO
VCCIO6
6
LLM3_SPLLT_IN_A
T (LVDS)*
N7
PL45A
6
GNDIO
GNDIO6
-
N6
PL45B
6
LLM3_SPLLC_IN_A
C (LVDS)*
N1
PL46A
6
LLM3_SPLLT_FB_A
T
LLM3_SPLLC_FB_A
C
LDQS52****
T (LVDS)*
N2
PL46B
6
VCCIO
VCCIO6
6
GNDIO
GNDIO6
-
P6
PL52A
6
N5
PL52B
6
LDQ52
C (LVDS)*
P1
PL53A
6
LDQ52
T
VCCIO
VCCIO6
6
P2
PL53B
6
LDQ52
C
P3
PL54A
6
LDQ52
T (LVDS)*
P4
PL54B
6
LDQ52
C (LVDS)*
P5
PL55A
6
LDQ52
T
GNDIO
GNDIO6
LDQ52
C
LLM0_GPLLT_IN_A**
T (LVDS)*
LLM0_GPLLC_IN_A**
C (LVDS)*
P7
PL55B
6
VCCIO
VCCIO6
6
GNDIO
GNDIO6
-
R1
PL62A
6
GNDIO
GNDIO6
-
R2
PL62B
6
R3
PL63A
6
LLM0_GPLLT_FB_A
T
R4
PL63B
6
LLM0_GPLLC_FB_A
C
VCCIO
VCCIO6
6
R6
PL64A
6
LLM0_GDLLT_IN_A**
T (LVDS)*
R5
PL64B
6
LLM0_GDLLC_IN_A**
C (LVDS)*
4-154
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
T1
PL65A
6
LLM0_GDLLT_FB_A
T
T2
PL65B
6
LLM0_GDLLC_FB_A
C
GNDIO
GNDIO6
-
R7
LLM0_PLLCAP
6
T6
PL67A
6
LDQ71
T (LVDS)*
T7
PL67B
6
LDQ71
C (LVDS)*
U1
PL68A
6
LDQ71
T
U2
PL68B
6
LDQ71
C
VCCIO
VCCIO6
6
T3
PL69A
6
LDQ71
T (LVDS)*
U3
PL69B
6
LDQ71
C (LVDS)*
U6
PL70A
6
LDQ71
T
LDQ71
C
U5
PL70B
6
GNDIO
GNDIO6
-
V5
PL71A
6
LDQS71
T (LVDS)*
U4
PL71B
6
LDQ71
C (LVDS)*
LDQ71
T
V1
PL72A
6
VCCIO
VCCIO6
6
V3
PL72B
6
LDQ71
C
W1
PL73A
6
LDQ71
T (LVDS)*
Y1
PL73B
6
LDQ71
C (LVDS)*
AA1
PL74A
6
LDQ71
T
GNDIO
GNDIO6
-
AA2
PL74B
6
LDQ71
C
V4
TCK
-
Y2
TDI
-
Y3
TMS
-
W3
TDO
-
W4
VCCJ
-
W5
PB2A
5
BDQ6
T
Y4
PB2B
5
BDQ6
C
W6
PB3A
5
BDQ6
T
V6
PB3B
5
BDQ6
C
AA3
PB4A
5
BDQ6
T
AB2
PB4B
5
BDQ6
C
VCCIO
VCCIO5
5
T8
PB5A
5
BDQ6
T
U7
PB5B
5
BDQ6
C
GNDIO
GNDIO5
-
U8
PB6A
5
BDQS6
T
T9
PB6B
5
BDQ6
C
V8
PB7A
5
BDQ6
T
W8
PB7B
5
BDQ6
C
4-155
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
Y6
PB8A
5
BDQ6
T
Y5
PB8B
5
BDQ6
C
VCCIO
VCCIO5
5
AB3
PB9A
5
BDQ6
T
AB4
PB9B
5
BDQ6
C
AB5
PB10A
5
BDQ6
T
BDQ6
C
AA6
PB10B
5
GNDIO
GNDIO5
-
VCCIO
VCCIO5
5
V9
PB40A
5
BDQ42
T
BDQ42
C
U9
PB40B
5
VCCIO
VCCIO5
5
U10
PB41A
5
BDQ42
T
T10
PB41B
5
BDQ42
C
GNDIO
GNDIO5
-
W9
PB42A
5
BDQS42****
T
Y8
PB42B
5
BDQ42
C
AA7
PB43A
5
VREF2_5/BDQ42
T
Y7
PB43B
5
VREF1_5/BDQ42
C
AB6
PB44A
5
PCLKT5_0/BDQ42
T
PCLKC5_0/BDQ42
C
PCLKT4_0/BDQ51
T
C
AB7
PB44B
5
VCCIO
VCCIO5
5
GNDIO
GNDIO5
-
AA8
PB49A
4
VCCIO
VCCIO4
4
AB8
PB49B
4
PCLKC4_0/BDQ51
AA9
PB50A
4
VREF2_4/BDQ51
T
Y9
PB50B
4
VREF1_4/BDQ51
C
BDQS51****
T
AB9
PB51A
4
GNDIO
GNDIO4
-
AB10
PB51B
4
BDQ51
C
AA10
PB52A
4
BDQ51
T
BDQ51
C
Y11
PB52B
4
VCCIO
VCCIO4
4
GNDIO
GNDIO4
-
V10
PB56A
4
BDQ60
T
U11
PB56B
4
BDQ60
C
V11
PB57A
4
BDQ60
T
W11
PB57B
4
BDQ60
C
AA11
PB58A
4
BDQ60
T
BDQ60
C
BDQ60
T
AB11
PB58B
4
VCCIO
VCCIO4
4
T11
PB59A
4
4-156
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
BDQ60
C
U12
PB59B
4
GNDIO
GNDIO4
-
AA12
PB60A
4
BDQS60
T
Y12
PB60B
4
BDQ60
C
V12
PB61A
4
BDQ60
T
W12
PB61B
4
BDQ60
C
AB12
PB62A
4
BDQ60
T
AA13
PB62B
4
BDQ60
C
VCCIO
VCCIO4
4
T12
PB63A
4
BDQ60
T
U13
PB63B
4
BDQ60
C
V13
PB64A
4
BDQ60
T
BDQ60
C
T13
PB64B
4
GNDIO
GNDIO4
-
AB13
PB65A
4
BDQ69
T
AB14
PB65B
4
BDQ69
C
U14
PB66A
4
BDQ69
T
T14
PB66B
4
BDQ69
C
BDQ69
T
AA14
PB67A
4
VCCIO
VCCIO4
4
Y14
PB67B
4
BDQ69
C
W14
PB68A
4
BDQ69
T
V14
PB68B
4
BDQ69
C
AB15
PB69A
4
BDQS69
T
GNDIO
GNDIO4
-
AA15
PB69B
4
BDQ69
C
V15
PB70A
4
BDQ69
T
U15
PB70B
4
BDQ69
C
BDQ69
T
AB16
PB71A
4
VCCIO
VCCIO4
4
AA16
PB71B
4
BDQ69
C
AB17
PB72A
4
BDQ69
T
AA17
PB72B
4
BDQ69
C
GNDIO
GNDIO4
-
W20
CFG2
8
V20
CFG1
8
V19
CFG0
8
V22
PROGRAMN
8
W22
CCLK
8
U18
INITN
8
U22
DONE
8
GNDIO
GNDIO8
-
U20
WRITEN***
8
4-157
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
U21
CS1N***
8
U17
CSN***
8
U16
D0/SPIFASTN***
8
VCCIO
VCCIO8
8
T16
D1***
8
T17
D2***
8
Dual Function
Differential
RLM0_GDLLC_FB_A
C
T22
D3***
8
GNDIO
GNDIO8
-
R22
D4***
8
T15
D5***
8
R17
D6***
8
T20
D7***
8
VCCIO
VCCIO8
8
T21
DI/CSSPI0N***
8
R21
DOUT/CSON/CSSPI1N***
8
R20
BUSY/SISPI***
8
R16
RLM0_PLLCAP
3
R18
PR65B
3
GNDIO
GNDIO3
-
R19
PR65A
3
RLM0_GDLLT_FB_A
T
P22
PR64B
3
RLM0_GDLLC_IN_A**
C (LVDS)*
P21
PR64A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
RLM0_GPLLC_IN_A**
C
P16
PR63B
3
VCCIO
VCCIO3
3
P17
PR63A
3
RLM0_GPLLT_IN_A**
T
P20
PR62B
3
RLM0_GPLLC_FB_A
C (LVDS)*
RLM0_GPLLT_FB_A
T (LVDS)*
P19
PR62A
3
GNDIO
GNDIO3
-
VCCIO
VCCIO3
3
P18
PR55B
3
RDQ52
C
RDQ52
T
N16
PR55A
3
GNDIO
GNDIO3
-
N22
PR54B
3
RDQ52
C (LVDS)*
N21
PR54A
3
RDQ52
T (LVDS)*
N17
PR53B
3
RDQ52
C
N18
PR53A
3
RDQ52
T
VCCIO
VCCIO3
3
M22
PR52B
3
RDQ52
C (LVDS)*
M21
PR52A
3
RDQS52
T (LVDS)*
M16
PR51B
3
RDQ52
C
GNDIO
GNDIO3
-
M17
PR51A
3
RDQ52
T
M20
PR50B
3
RDQ52
C (LVDS)*
4-158
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
M19
PR50A
3
RDQ52
T (LVDS)*
M18
PR49B
3
RDQ52
C
VCCIO
VCCIO3
3
L16
PR49A
3
RDQ52
T
L22
PR48B
3
RDQ52
C (LVDS)*
L21
PR48A
3
RDQ52
T (LVDS)*
GNDIO
GNDIO3
-
K22
PR46B
3
RLM3_SPLLC_FB_A
C
VCCIO
VCCIO3
3
K21
PR46A
3
RLM3_SPLLT_FB_A
T
L17
PR45B
3
RLM3_SPLLC_IN_A
C (LVDS)*
L18
PR45A
3
RLM3_SPLLT_IN_A
T (LVDS)*
GNDIO
GNDIO3
-
L20
PR44B
3
C
L19
PR44A
3
T
K16
PR43B
3
C (LVDS)*
K17
PR43A
3
T (LVDS)*
VCCIO
VCCIO3
3
J16
PR42B
3
VREF2_3
C
K18
PR42A
3
VREF1_3
T
J22
PR41B
3
PCLKC3_0
C (LVDS)*
J21
PR41A
3
PCLKT3_0
T (LVDS)*
H22
PR39B
2
PCLKC2_0/RDQ36
C
H21
PR39A
2
PCLKT2_0/RDQ36
T
GNDIO
GNDIO2
-
J17
PR38B
2
RDQ36
C (LVDS)*
J18
PR38A
2
RDQ36
T (LVDS)*
J20
PR37B
2
RDQ36
C
RDQ36
T
J19
PR37A
2
VCCIO
VCCIO2
2
H16
PR36B
2
RDQ36
C (LVDS)*
H17
PR36A
2
RDQS36
T (LVDS)*
G22
PR35B
2
RDQ36
C
GNDIO
GNDIO2
-
G21
PR35A
2
RDQ36
T
H20
PR34B
2
RDQ36
C (LVDS)*
H19
PR34A
2
RDQ36
T (LVDS)*
G16
PR33B
2
RUM3_SPLLC_FB_A/RDQ36
C
VCCIO
VCCIO2
2
H18
PR33A
2
RUM3_SPLLT_FB_A/RDQ36
T
F22
PR32B
2
RUM3_SPLLC_IN_A/RDQ36
C (LVDS)*
F21
PR32A
2
RUM3_SPLLT_IN_A/RDQ36
T (LVDS)*
G20
PR30B
2
RDQ27
C
4-159
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
F20
PR30A
2
RDQ27
T
GNDIO
GNDIO2
-
G17
PR29B
2
RDQ27
C (LVDS)*
F17
PR29A
2
RDQ27
T (LVDS)*
VCCIO
VCCIO2
2
GNDIO
GNDIO2
-
E22
PR14B
2
C
D22
PR14A
2
T
VCCIO
VCCIO2
-
E20
PR13B
2
D20
PR13A
2
D19
PR12B
2
GNDIO
GNDIO2
-
E19
PR12A
F18
F19
VCCIO
VCCIO2
-
E18
PR9B
2
GNDIO
GNDIO2
-
D18
PR9A
2
VCCIO
VCCIO2
2
F16
XRES
-
C22
URC_SQ_VCCRX0
12
A21
URC_SQ_HDINP0
12
B22
URC_SQ_VCCIB0
12
B21
URC_SQ_HDINN0
12
C19
URC_SQ_VCCTX0
12
A18
URC_SQ_HDOUTP0
12
A19
URC_SQ_VCCOB0
12
B18
URC_SQ_HDOUTN0
12
C18
URC_SQ_VCCTX1
12
B17
URC_SQ_HDOUTN1
12
C17
URC_SQ_VCCOB1
12
A17
URC_SQ_HDOUTP1
12
C21
URC_SQ_VCCRX1
12
B20
URC_SQ_HDINN1
12
C20
URC_SQ_VCCIB1
12
A20
URC_SQ_HDINP1
12
B16
URC_SQ_VCCAUX33
12
E17
URC_SQ_REFCLKN
12
C
D17
URC_SQ_REFCLKP
12
T
C16
URC_SQ_VCCP
12
A12
URC_SQ_HDINP2
12
C (LVDS)*
T (LVDS)*
RUM0_SPLLC_FB_A
C
2
RUM0_SPLLT_FB_A
T
PR11B
2
RUM0_SPLLC_IN_A
C (LVDS)*
PR11A
2
RUM0_SPLLT_IN_A
T (LVDS)*
VREF2_2
C
VREF1_2
T
4-160
T
C
T
C
C
T
C
T
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
C12
URC_SQ_VCCIB2
12
B12
URC_SQ_HDINN2
12
C11
URC_SQ_VCCRX2
12
A15
URC_SQ_HDOUTP2
12
C15
URC_SQ_VCCOB2
12
B15
URC_SQ_HDOUTN2
12
C14
URC_SQ_VCCTX2
12
B14
URC_SQ_HDOUTN3
12
A13
URC_SQ_VCCOB3
12
A14
URC_SQ_HDOUTP3
12
C13
URC_SQ_VCCTX3
12
B11
URC_SQ_HDINN3
12
B10
URC_SQ_VCCIB3
12
A11
URC_SQ_HDINP3
12
Dual Function
Differential
C
T
C
C
T
C
T
C10
URC_SQ_VCCRX3
12
GNDIO
GNDIO1
-
VCCIO
VCCIO1
1
E13
PT55B
1
C
T
D12
PT55A
1
GNDIO
GNDIO1
-
A9
PT54B
1
C
A8
PT54A
1
T
A7
PT53B
1
C
A6
PT53A
1
T
VCCIO
VCCIO1
1
E12
PT52B
1
C
F12
PT52A
1
T
A5
PT51B
1
C
T
A4
PT51A
1
GNDIO
GNDIO1
-
B7
PT50B
1
C
B8
PT50A
1
T
G11
PT49B
1
C
E11
PT49A
1
T
VCCIO
VCCIO1
1
D11
PT48B
1
D10
PT48A
1
VREF1_1
T
G10
PT47B
1
PCLKC1_0
C
VREF2_1
C
F11
PT47A
1
PCLKT1_0
T
G9
PT46B
0
PCLKC0_0
C
GNDIO
GNDIO0
-
F9
PT46A
0
PCLKT0_0
T
C9
PT45B
0
VREF2_0
C
4-161
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
VREF1_0
Differential
D9
PT45A
0
A2
PT44B
0
T
VCCIO
VCCIO0
0
A3
PT44A
0
T
C
B3
PT43B
0
C
C4
PT43A
0
T
E10
PT42B
0
C
F10
PT42A
0
T
C
C7
PT41B
0
GNDIO
GNDIO0
-
B6
PT41A
0
T
C6
PT40B
0
C
VCCIO
VCCIO0
0
C5
PT40A
0
T
C8
PT39B
0
C
D8
PT39A
0
T
E8
PT38B
0
C
E9
PT38A
0
T
GNDIO
GNDIO0
-
VCCIO
VCCIO0
0
F8
PT10B
0
GNDIO
GNDIO0
-
C
G8
PT10A
0
T
F7
PT9B
0
C
G7
PT9A
0
T
C3
PT8B
0
C
VCCIO
VCCIO0
0
D4
PT8A
0
T
F6
PT7B
0
C
E6
PT7A
0
T
E5
PT6B
0
C
D6
PT6A
0
T
C
D3
PT5B
0
GNDIO
GNDIO0
-
E3
PT5A
0
T
D5
PT4B
0
C
VCCIO
VCCIO0
0
E4
PT4A
0
T
C2
PT3B
0
C
B2
PT3A
0
T
B1
PT2B
0
C
C1
PT2A
0
T
J10
VCC
-
4-162
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
J11
VCC
-
J12
VCC
-
J13
VCC
-
K14
VCC
-
K9
VCC
-
L14
VCC
-
L9
VCC
-
M14
VCC
-
M9
VCC
-
N14
VCC
-
N9
VCC
-
P10
VCC
-
P11
VCC
-
P12
VCC
-
P13
VCC
-
B5
VCCIO0
0
B9
VCCIO0
0
E7
VCCIO0
0
H9
VCCIO0
0
D13
VCCIO1
1
E16
VCCIO1
1
H14
VCCIO1
1
E21
VCCIO2
2
G18
VCCIO2
2
J15
VCCIO2
2
K19
VCCIO2
2
N19
VCCIO3
3
P15
VCCIO3
3
T18
VCCIO3
3
V21
VCCIO3
3
AA18
VCCIO4
4
R14
VCCIO4
4
V16
VCCIO4
4
W13
VCCIO4
4
AA5
VCCIO5
5
R9
VCCIO5
5
V7
VCCIO5
5
W10
VCCIO5
5
N4
VCCIO6
6
P8
VCCIO6
6
T5
VCCIO6
6
V2
VCCIO6
6
E2
VCCIO7
7
4-163
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
G5
VCCIO7
7
J8
VCCIO7
7
K4
VCCIO7
7
AA22
VCCIO8
8
U19
VCCIO8
8
H11
VCCAUX
-
H12
VCCAUX
-
L15
VCCAUX
-
L8
VCCAUX
-
M15
VCCAUX
-
M8
VCCAUX
-
R11
VCCAUX
-
R12
VCCAUX
-
A1
GND
-
A10
GND
-
A16
GND
-
A22
GND
-
AA19
GND
-
AA4
GND
-
AB1
GND
-
AB22
GND
-
B13
GND
-
B19
GND
-
B4
GND
-
D16
GND
-
D2
GND
-
D21
GND
-
D7
GND
-
G19
GND
-
G4
GND
-
H10
GND
-
H13
GND
-
J14
GND
-
J9
GND
-
K10
GND
-
K11
GND
-
K12
GND
-
K13
GND
-
K15
GND
-
K20
GND
-
K3
GND
-
K8
GND
-
L10
GND
-
4-164
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
L11
GND
-
L12
GND
-
L13
GND
-
M10
GND
-
M11
GND
-
M12
GND
-
M13
GND
-
N10
GND
-
N11
GND
-
N12
GND
-
N13
GND
-
N15
GND
-
N20
GND
-
N3
GND
-
N8
GND
-
P14
GND
-
P9
GND
-
R10
GND
-
R13
GND
-
T19
GND
-
T4
GND
-
W16
GND
-
W2
GND
-
W21
GND
-
W7
GND
-
Y10
GND
-
Y13
GND
-
Y15
NC
-
W15
NC
-
AB20
NC
-
AB21
NC
-
AA21
NC
-
AA20
NC
-
AB19
NC
-
AB18
NC
-
Y22
NC
-
Y21
NC
-
Y17
NC
-
Y18
NC
-
Y16
NC
-
W17
NC
-
Y19
NC
-
Y20
NC
-
4-165
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE Logic Signal Connections: 484 fpBGA (Cont.)
LFE2M50E/SE
Ball Number
Ball/Pad Function
Bank
W19
NC
-
W18
NC
-
V17
NC
-
V18
NC
-
D15
NC
-
G14
NC
-
G15
NC
-
D14
NC
-
E15
NC
-
E14
NC
-
F15
NC
-
F14
NC
-
F13
NC
-
G12
NC
-
G13
NC
-
H8
VCCPLL
-
H15
VCCPLL
-
R8
VCCPLL
-
R15
VCCPLL
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
***For density migration, board design must take into account that these sysCONFIG pins are dual function for the lower density devices
(ECP2M20 and ECP2M35) and are dedicated pins for the higher density devices (ECP2M50, ECP2M70 and ECP2M100).
****Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-166
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
C2
PL2A
7
LDQ6
Bank
Dual Function
T (LVDS)*
PL2A
7
LDQ6
C1
PL2B
7
LDQ6
T*
C (LVDS)*
PL2B
7
LDQ6
C*
F6
PL3A
7
LDQ6
T
PL3A
7
LDQ6
T
H9
PL3B
7
LDQ6
C
PL3B
7
LDQ6
C
LDQ6
T (LVDS)*
PL4A
7
LDQ6
T*
VCCIO7
7
C*
Differential
D3
PL4A
7
VCCIO
VCCIO7
7
D2
PL4B
7
LDQ6
C (LVDS)*
PL4B
7
LDQ6
F5
PL5A
7
LDQ6
T
PL5A
7
LDQ6
T
H8
PL5B
7
LDQ6
C
PL5B
7
LDQ6
C
LDQS6
T (LVDS)*
PL6A
7
LDQS6
T*
GNDIO7
C*
E3
PL6A
7
GNDIO
GNDIO7
-
E2
PL6B
7
LDQ6
C (LVDS)*
PL6B
7
LDQ6
J9
PL7A
7
LDQ6
T
PL7A
7
LDQ6
T
E4
PL7B
7
LDQ6
C
PL7B
7
LDQ6
C
VCCIO
VCCIO7
7
VCCIO7
7
E1
PL8A
7
LDQ6
T (LVDS)*
PL8A
7
LDQ6
T*
D1
PL8B
7
LDQ6
C (LVDS)*
PL8B
7
LDQ6
C*
J8
PL9A
7
VREF2_7/LDQ6
T
PL9A
7
VREF2_7/LDQ6
T
F4
PL9B
7
VREF1_7/LDQ6
C
PL9B
7
VREF1_7/LDQ6
C
GNDIO
GNDIO7
-
GNDIO7
-
-
-
-
VCCIO7
7
F3
PL11A
7
LUM0_SPLLT_IN_A/LDQ15
T (LVDS)*
PL11A
7
LUM0_SPLLT_IN_A
T*
F1
PL11B
7
LUM0_SPLLC_IN_A/LDQ15
C (LVDS)*
PL11B
7
LUM0_SPLLC_IN_A
C*
G6
PL12A
7
LUM0_SPLLT_FB_A/LDQ15
T
PL12A
7
LUM0_SPLLT_FB_A
T
K9
PL12B
7
LUM0_SPLLC_FB_A/LDQ15
C
PL12B
7
LUM0_SPLLC_FB_A
C
LDQ15
T (LVDS)*
-
-
-
G5
PL13A
7
VCCIO
VCCIO7
7
G4
PL13B
7
LDQ15
C (LVDS)*
PL13B
7
C*
H5
PL14A
7
LDQ15
T
PL14A
7
T
-
-
-
VCCIO7
7
H6
PL14B
7
GNDIO
GNDIO7
-
LDQ15
J7
PL16A
7
LDQ15
H4
PL16B
7
LDQ15
H3
PL17A
7
LDQ15
T (LVDS)*
VCCIO
VCCIO7
7
LDQ15
C
GNDIO7
-
PL13A
7
-
-
T*
PL14B
7
GNDIO7
-
T
PL19A
7
T
C
PL19B
7
C
T*
G3
PL17B
7
GNDIO
GNDIO7
-
C (LVDS)*
G1
PL19A
7
LDQ23
H1
PL19B
7
LDQ23
J3
PL20A
7
LDQ23
J4
PL20B
7
LDQ23
VCCIO
VCCIO7
7
H2
PL21A
7
LDQ23
T (LVDS)*
J2
PL21B
7
LDQ23
K7
PL22A
7
J6
PL22B
7
GNDIO
GNDIO7
-
PL20A
7
VCCIO7
7
C
PL20B
7
GNDIO7
-
T (LVDS)*
PL23A
7
LDQ27
T*
C (LVDS)*
PL23B
7
LDQ27
C*
T
PL24A
7
LDQ27
T
C
PL24B
7
LDQ27
C
VCCIO7
7
PL25A
7
LDQ27
T*
C (LVDS)*
PL25B
7
LDQ27
C*
LDQ23
T
PL26A
7
LDQ27
T
LDQ23
C
PL26B
7
LDQ27
C
GNDIO7
-
4-167
C*
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
K5
PL23A
7
LDQS23
Bank
Dual Function
T (LVDS)*
PL27A
7
LDQS27
L5
PL23B
7
T*
LDQ23
C (LVDS)*
PL27B
7
LDQ27
C*
K4
PL24A
7
VCCIO
VCCIO7
7
LDQ23
T
LDQ27
T
PL28A
7
VCCIO7
7
Differential
L4
PL24B
7
LDQ23
C
PL28B
7
LDQ27
C
K3
PL25A
7
LDQ23
T (LVDS)*
PL29A
7
LDQ27
T*
L3
PL25B
7
LDQ23
C (LVDS)*
PL29B
7
LDQ27
C*
J1
PL26A
7
LDQ23
T
PL30A
7
LDQ27
T
GNDIO
GNDIO7
-
GNDIO7
-
K2
PL26B
7
LDQ23
C
PL30B
7
LDQ27
C
K1
PL28A
7
LUM1_SPLLT_IN_A/LDQ32
T (LVDS)*
PL32A
7
LUM3_SPLLT_IN_A/LDQ36
T*
C*
L1
PL28B
7
LUM1_SPLLC_IN_A/LDQ32
C (LVDS)*
PL32B
7
LUM3_SPLLC_IN_A/LDQ36
K8
PL29A
7
LUM1_SPLLT_FB_A/LDQ32
T
PL33A
7
LUM3_SPLLT_FB_A/LDQ36
T
M5
PL29B
7
LUM1_SPLLC_FB_A/LDQ32
C
PL33B
7
LUM3_SPLLC_FB_A/LDQ36
C
VCCIO
VCCIO7
7
VCCIO7
7
M4
PL30A
7
LDQ32
T (LVDS)*
PL34A
7
LDQ36
T*
M3
PL30B
7
LDQ32
C (LVDS)*
PL34B
7
LDQ36
C*
L8
PL31A
7
LDQ32
T
PL35A
7
LDQ36
T
M6
PL31B
7
LDQ32
C
PL35B
7
LDQ36
C
GNDIO
GNDIO7
-
GNDIO7
-
M1
PL32A
7
LDQS32
T (LVDS)*
PL36A
7
LDQS36
T*
N1
PL32B
7
LDQ32
C (LVDS)*
PL36B
7
LDQ36
C*
LDQ32
T
LDQ36
T
N3
PL33A
7
VCCIO
VCCIO7
7
N2
PL33B
7
LDQ32
N5
PL34A
7
LDQ32
PL37A
7
VCCIO7
7
C
PL37B
7
LDQ36
C
T (LVDS)*
PL38A
7
LDQ36
T*
N4
PL34B
7
LDQ32
C (LVDS)*
PL38B
7
LDQ36
C*
M7
PL35A
7
PCLKT7_0/LDQ32
T
PL39A
7
PCLKT7_0/LDQ36
T
GNDIO
GNDIO7
-
GNDIO7
-
M8
PL35B
7
PCLKC7_0/LDQ32
C
PL39B
7
PCLKC7_0/LDQ36
C
P3
PL37A
6
PCLKT6_0
T (LVDS)*
PL41A
6
PCLKT6_0
T*
P2
PL37B
6
PCLKC6_0
C (LVDS)*
PL41B
6
PCLKC6_0
C*
P5
PL38A
6
VREF2_6
T
PL42A
6
VREF2_6
T
N6
PL38B
6
VREF1_6
C
PL42B
6
VREF1_6
C
P4
PL39A
6
PL43A
6
VCCIO
VCCIO6
6
VCCIO6
6
T (LVDS)*
T*
R3
PL39B
6
C (LVDS)*
PL43B
6
P6
PL40A
6
T
PL44A
6
T
N7
NC
-
PL44B
6
C
PL45A
6
GNDIO6
-
LLM2_SPLLT_IN_A
T (LVDS)*
C*
P1
PL41A
6
GNDIO
GNDIO6
-
R1
PL41B
6
LLM2_SPLLC_IN_A
C (LVDS)*
PL45B
N8
PL42A
6
LLM2_SPLLT_FB_A
T
PL46A
R5
PL42B
6
LLM2_SPLLC_FB_A
C
PL46B
6
VCCIO
VCCIO6
6
VCCIO6
6
T3
PL44A
6
LDQ48
T (LVDS)*
PL48A
6
LDQ52
T*
T4
PL44B
6
LDQ48
C (LVDS)*
PL48B
6
LDQ52
C*
P8
PL45A
6
LDQ48
T
PL49A
6
LDQ52
T
R6
PL45B
6
LDQ48
C
PL49B
6
LDQ52
C
4-168
LLM3_SPLLT_IN_A
T*
6
LLM3_SPLLC_IN_A
C*
6
LLM3_SPLLT_FB_A
T
LLM3_SPLLC_FB_A
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO6
6
LFE2M50E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
VCCIO6
6
Dual Function
Differential
T1
PL46A
6
LDQ48
T (LVDS)*
PL50A
6
LDQ52
T*
U1
PL46B
6
LDQ48
C (LVDS)*
PL50B
6
LDQ52
C*
R7
PL47A
6
LDQ48
T
PL51A
6
LDQ52
T
T5
PL47B
6
LDQ48
C
PL51B
6
LDQ52
C
GNDIO
GNDIO6
-
GNDIO6
-
U3
PL48A
6
LDQS48
T (LVDS)*
PL52A
6
LDQS52
T*
U4
PL48B
6
LDQ48
C (LVDS)*
PL52B
6
LDQ52
C*
LDQ48
T
LDQ52
T
U5
PL49A
6
VCCIO
VCCIO6
6
U6
PL49B
6
LDQ48
U2
PL50A
6
LDQ48
PL53A
6
VCCIO6
6
C
PL53B
6
LDQ52
C
T (LVDS)*
PL54A
6
LDQ52
T*
V1
PL50B
6
LDQ48
C (LVDS)*
PL54B
6
LDQ52
C*
W2
PL51A
6
LDQ48
T
PL55A
6
LDQ52
T
GNDIO
GNDIO6
-
GNDIO6
-
V2
PL51B
6
LDQ48
C
PL55B
6
V4
PL55A
6
LDQ57
T (LVDS)*
PL59A
6
VCCIO
VCCIO6
6
VCCIO6
6
V3
PL55B
6
LDQ57
C (LVDS)*
PL59B
6
-
-
-
GNDIO6
-
PL62A
6
GNDIO6
-
LLM0_GPLLT_IN_A**/LDQS57****
T (LVDS)*
LDQ52
C
T*
C*
W4
PL57A
6
GNDIO
GNDIO6
-
LLM0_GPLLT_IN_A
T*
W3
PL57B
6
LLM0_GPLLC_IN_A**/LDQ57
C (LVDS)*
PL62B
W1
PL58A
6
LLM0_GPLLT_FB_A/LDQ57
T
PL63A
6
LLM0_GPLLC_IN_A
C*
6
LLM0_GPLLT_FB_A
Y1
PL58B
6
LLM0_GPLLC_FB_A/LDQ57
C
PL63B
6
T
LLM0_GPLLC_FB_A
C
VCCIO
VCCIO6
6
VCCIO6
6
AA1
PL59A
6
LLM0_GDLLT_IN_A**/LDQ57
T (LVDS)*
PL64A
6
LLM0_GDLLT_IN_A
T*
AB1
PL59B
6
LLM0_GDLLC_IN_A**/LDQ57
C (LVDS)*
PL64B
6
LLM0_GDLLC_IN_A
C*
U7
PL60A
6
LLM0_GDLLT_FB_A/LDQ57
T
PL65A
6
LLM0_GDLLT_FB_A
T
V6
PL60B
6
LLM0_GDLLC_FB_A/LDQ57
C
PL65B
6
LLM0_GDLLC_FB_A
C
GNDIO
GNDIO6
-
GNDIO6
-
T8
LLM0_PLLCAP
6
LLM0_PLLCAP
6
W5
PL62A
6
LDQ66
T (LVDS)*
PL67A
6
LDQ71
T*
Y4
PL62B
6
LDQ66
C (LVDS)*
PL67B
6
LDQ71
C*
U8
PL63A
6
LDQ66
T
PL68A
6
LDQ71
T
W6
PL63B
6
LDQ66
C
PL68B
6
LDQ71
C
VCCIO
VCCIO6
6
VCCIO6
6
Y3
PL64A
6
LDQ66
T (LVDS)*
PL69A
6
LDQ71
T*
AA3
PL64B
6
LDQ66
C (LVDS)*
PL69B
6
LDQ71
C*
PL70A
6
LDQ71
T
LDQ66
C
PL70B
6
LDQ71
C
V7
NC
-
Y5
PL65B
6
GNDIO
GNDIO6
-
GNDIO6
-
AB2
PL66A
6
LDQS66
T (LVDS)*
PL71A
6
LDQS71
T*
AA4
PL66B
6
LDQ66
C (LVDS)*
PL71B
6
LDQ71
C*
LDQ66
T
LDQ71
T
Y6
PL67A
6
VCCIO
VCCIO6
6
PL72A
6
VCCIO6
6
U9
PL67B
6
LDQ66
C
PL72B
6
LDQ71
C
AA5
PL68A
6
LDQ66
T (LVDS)*
PL73A
6
LDQ71
T*
AA6
PL68B
6
LDQ66
C (LVDS)*
PL73B
6
LDQ71
C*
4-169
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
Y7
PL69A
6
LDQ66
GNDIO
GNDIO6
-
V9
PL69B
6
AC3
TCK
-
W8
TDI
-
TDI
-
AC4
TMS
-
TMS
-
LDQ66
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
T
PL74A
6
LDQ71
T
GNDIO6
-
PL74B
6
LDQ71
C
TCK
-
C
V8
TDO
-
TDO
-
AA7
VCCJ
-
VCCJ
-
AB6
PB2A
5
BDQ6
T
PB2A
5
BDQ6
T
Y8
PB2B
5
BDQ6
C
PB2B
5
BDQ6
C
AD1
PB3A
5
BDQ6
T
PB3A
5
BDQ6
T
AD2
PB3B
5
BDQ6
C
PB3B
5
BDQ6
C
AC5
PB4A
5
BDQ6
T
PB4A
5
BDQ6
T
AA8
PB4B
5
BDQ6
C
PB4B
5
BDQ6
C
VCCIO
VCCIO5
5
VCCIO5
5
AC6
PB5A
5
BDQ6
T
PB5A
5
BDQ6
T
W9
PB5B
5
BDQ6
C
PB5B
5
BDQ6
C
BDQS6
T
BDQS6
T
C
AB7
PB6A
5
GNDIO
GNDIO5
-
PB6A
5
GNDIO5
-
Y9
PB6B
5
BDQ6
C
PB6B
5
BDQ6
AD3
PB7A
5
BDQ6
T
PB7A
5
BDQ6
T
AD4
PB7B
5
BDQ6
C
PB7B
5
BDQ6
C
AA9
PB8A
5
BDQ6
T
PB8A
5
BDQ6
T
W10
PB8B
5
BDQ6
C
PB8B
5
BDQ6
C
VCCIO
VCCIO5
5
VCCIO5
5
AC7
PB9A
5
BDQ6
T
PB9A
5
BDQ6
T
Y10
PB9B
5
BDQ6
C
PB9B
5
BDQ6
C
AE2
PB10A
5
BDQ6
T
PB10A
5
BDQ6
T
AD5
PB10B
5
BDQ6
C
PB10B
5
BDQ6
C
GNDIO
GNDIO5
-
GNDIO5
-
AE4
PB11A
5
BDQ15
T
PB11A
5
BDQ15
T
AE3
PB11B
5
BDQ15
C
PB11B
5
BDQ15
C
W11
PB12A
5
BDQ15
T
PB12A
5
BDQ15
T
AB8
PB12B
5
BDQ15
C
PB12B
5
BDQ15
C
AE5
PB13A
5
BDQ15
T
PB13A
5
BDQ15
T
AD6
PB13B
5
BDQ15
C
PB13B
5
BDQ15
C
VCCIO
VCCIO5
5
VCCIO5
5
AA10
PB14A
5
BDQ15
T
PB14A
5
BDQ15
T
AC8
PB14B
5
BDQ15
C
PB14B
5
BDQ15
C
BDQS15
T
BDQS15
T
C
W12
PB15A
5
GNDIO
GNDIO5
-
PB15A
5
GNDIO5
-
AC9
PB15B
5
BDQ15
C
PB15B
5
BDQ15
W13
PB16A
5
BDQ15
T
PB16A
5
BDQ15
T
AB10
PB16B
5
BDQ15
C
PB16B
5
BDQ15
C
AF3
PB17A
5
BDQ15
T
PB17A
5
BDQ15
T
AF4
PB17B
5
BDQ15
C
PB17B
5
BDQ15
C
VCCIO
VCCIO5
5
VCCIO5
5
AF5
PB18A
5
BDQ15
T
PB18A
5
BDQ15
T
AF6
PB18B
5
BDQ15
C
PB18B
5
BDQ15
C
4-170
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
Y12
PB19A
5
BDQ15
GNDIO
GNDIO5
-
AB11
PB19B
5
-
-
-
BDQ15
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
T
PB19A
5
BDQ15
T
GNDIO5
-
PB19B
5
BDQ15
C
VCCIO5
5
C
-
-
-
GNDIO5
-
AD7
PB20A
5
BDQ24
T
PB29A
5
BDQ33
T
AF7
PB20B
5
BDQ24
C
PB29B
5
BDQ33
C
AD8
PB21A
5
BDQ24
T
PB30A
5
BDQ33
T
AA12
PB21B
5
BDQ24
C
PB30B
5
BDQ33
C
BDQ24
T
BDQ33
T
C
AE8
PB22A
5
VCCIO
VCCIO5
5
PB31A
5
VCCIO5
5
AF8
PB22B
5
BDQ24
C
PB31B
5
BDQ33
AD9
PB23A
5
BDQ24
T
PB32A
5
BDQ33
T
AC10
PB23B
5
BDQ24
C
PB32B
5
BDQ33
C
BDQS24
T
BDQS33
T
C
AC11
PB24A
5
GNDIO
GNDIO5
-
PB33A
5
GNDIO5
-
AB12
PB24B
5
BDQ24
C
PB33B
5
BDQ33
AD10
PB25A
5
BDQ24
T
PB34A
5
BDQ33
T
Y13
PB25B
5
BDQ24
C
PB34B
5
BDQ33
C
BDQ24
T
BDQ33
T
C
AF9
PB26A
5
VCCIO
VCCIO5
5
PB35A
5
VCCIO5
5
AE9
PB26B
5
BDQ24
C
PB35B
5
BDQ33
AF10
PB27A
5
BDQ24
T
PB36A
5
BDQ33
T
AE10
PB27B
5
BDQ24
C
PB36B
5
BDQ33
C
AD11
PB28A
5
BDQ24
T
BDQ33
T
GNDIO
GNDIO5
-
BDQ33
C
BDQ24
C
PB37A
5
GNDIO5
-
PB37B
5
VCCIO5
5
AF11
PB28B
5
VCCIO
VCCIO5
5
GNDIO
GNDIO5
-
GNDIO5
-
AA13
PB33A
5
BDQS33****
T
PB42A
5
BDQS42****
T
AB13
PB33B
5
BDQ33
C
PB42B
5
BDQ42
C
W14
PB34A
5
VREF2_5/BDQ33
T
PB43A
5
VREF2_5/BDQ42
T
AC12
PB34B
5
VREF1_5/BDQ33
C
PB43B
5
VREF1_5/BDQ42
C
AF12
PB35A
5
PCLKT5_0/BDQ33
T
PB44A
5
PCLKT5_0/BDQ42
T
AD12
PB35B
5
PCLKC5_0/BDQ33
C
PB44B
5
PCLKC5_0/BDQ42
C
5
PCLKT4_0/BDQ51
T
C
VCCIO
VCCIO5
5
VCCIO5
GNDIO
GNDIO5
-
GNDIO5
-
AC13
PB40A
4
PB49A
4
VCCIO
VCCIO4
4
VCCIO4
4
PCLKT4_0/BDQ42
T
Y14
PB40B
4
PCLKC4_0/BDQ42
C
PB49B
4
PCLKC4_0/BDQ51
AB20
PB57A
4
BDQ60
T
PB50A
4
VREF2_4/BDQ51
T
AC14
PB41B
4
VREF1_4/BDQ42
C
PB50B
4
VREF1_4/BDQ51
C
AB14
PB42A
4
BDQS42****
T
BDQS51****
T
GNDIO
GNDIO4
-
BDQ51
C
BDQ42
C
PB51A
4
GNDIO4
-
PB51B
4
VCCIO4
4
AA14
PB42B
4
VCCIO
VCCIO4
4
GNDIO
GNDIO4
-
GNDIO4
-
W17
PB65A
4
BDQ69
T
PB56A
4
BDQ60
T
AA19
PB65B
4
BDQ69
C
PB56B
4
BDQ60
C
4-171
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
AC15
PB48A
4
BDQ51
Y18
PB68B
4
BDQ69
Differential
Ball/Pad
Function
Bank
Dual Function
T
PB57A
4
BDQ60
T
C
PB57B
4
BDQ60
C
Differential
AB15
PB49A
4
BDQ51
T
PB58A
4
BDQ60
T
AC16
PB49B
4
BDQ51
C
PB58B
4
BDQ60
C
VCCIO
VCCIO4
4
VCCIO4
4
AA17
PB60A
4
BDQS60****
T
PB59A
4
BDQ60
T
AB16
PB50B
4
BDQ51
C
PB59B
4
BDQ60
C
GNDIO
GNDIO4
-
GNDIO4
-
AA15
PB51A
4
BDQS51****
T
PB60A
4
BDQS60
T
W16
PB59B
4
BDQ60
C
PB60B
4
BDQ60
C
Y15
PB52A
4
BDQ51
T
PB61A
4
BDQ60
T
AC17
PB52B
4
BDQ51
C
PB61B
4
BDQ60
C
AA18
PB61A
4
BDQ60
T
PB62A
4
BDQ60
T
Y17
PB61B
4
BDQ60
C
PB62B
4
BDQ60
C
4
-
-
-
VCCIO4
GNDIO
GNDIO4
-
-
-
W15
PB54A
4
BDQ51
T
PB63A
4
BDQ60
T
AB17
PB54B
4
BDQ51
C
PB63B
4
BDQ60
C
GNDIO
GNDIO4
-
GNDIO4
-
VCCIO
VCCIO4
4
VCCIO4
4
V17
PB73A
4
BDQ69
T
PB72A
4
BDQ69
T
AA20
PB73B
4
BDQ69
C
PB72B
4
BDQ69
C
GNDIO
GNDIO4
-
GNDIO4
-
AD13
VCC
-
LRC_SQ_VCCRX3
13
AF14
PB47A
4
AE13
NC
-
AE14
PB41A
4
AD16
VCC
-
AF17
PB51B
4
AF16
NC
-
AE17
PB50A
4
AD17
VCC
-
AE18
PB53B
4
AD18
NC
-
AF18
PB53A
4
AD14
VCC
-
AE15
PB48B
4
AD15
NC
-
AF15
PB47B
4
AD19
VCC
-
BDQ51
VREF2_4/BDQ42
BDQ51
BDQ51
BDQ51
BDQ51
BDQ51
BDQ51
T
T
C
T
C
T
C
C
LRC_SQ_HDINP3
13
LRC_SQ_VCCIB3
13
LRC_SQ_HDINN3
13
LRC_SQ_VCCTX3
13
LRC_SQ_HDOUTP3
13
LRC_SQ_VCCOB3
13
LRC_SQ_HDOUTN3
13
LRC_SQ_VCCTX2
13
LRC_SQ_HDOUTN2
13
LRC_SQ_VCCOB2
13
LRC_SQ_HDOUTP2
13
LRC_SQ_VCCRX2
13
LRC_SQ_HDINN2
13
LRC_SQ_VCCIB2
13
LRC_SQ_HDINP2
13
LRC_SQ_VCCP
13
T
C
T
C
C
T
C
T
AC19
PB57B
4
BDQ60
C
LRC_SQ_REFCLKP
13
T
AB19
PB59A
4
BDQ60
T
LRC_SQ_REFCLKN
13
C
AE19
VCCAUX
-
LRC_SQ_VCCAUX33
13
AF23
PB64A
4
BDQ60
T
AD23
NC
-
AE23
PB66B
4
AD24
VCC
-
AF20
PB55A
4
AD20
NC
-
BDQ69
BDQ51
C
T
4-172
LRC_SQ_HDINP1
13
LRC_SQ_VCCIB1
13
LRC_SQ_HDINN1
13
LRC_SQ_VCCRX1
13
LRC_SQ_HDOUTP1
13
LRC_SQ_VCCOB1
13
T
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
AE20
PB55B
4
BDQ51
AD21
VCC
-
AE21
PB63B
4
AF22
NC
-
AF21
PB62A
4
AD22
VCC
-
AE24
PB67B
4
AE25
NC
-
BDQ60
BDQ60
BDQ69
BDQ69
Differential
Ball/Pad
Function
Bank
C
LRC_SQ_HDOUTN1
13
LRC_SQ_VCCTX1
13
C
T
C
T
LRC_SQ_HDOUTN0
13
LRC_SQ_VCCOB0
13
LRC_SQ_HDOUTP0
13
LRC_SQ_VCCTX0
13
LRC_SQ_HDINN0
13
LRC_SQ_VCCIB0
13
AF24
PB67A
4
LRC_SQ_HDINP0
13
AD25
VCC
-
LRC_SQ_VCCRX0
13
AA21
CFG2
8
CFG2
8
AA22
CFG1
8
CFG1
8
AB23
CFG0
8
CFG0
8
AC26
PROGRAMN
8
PROGRAMN
8
AB24
CCLK
8
CCLK
8
AA23
INITN
8
INITN
8
AB25
DONE
8
DONE
8
GNDIO
GNDIO8
-
Y19
PR68B
8
WRITEN***
Y21
PR68A
8
AB26
PR67B
8
Y22
PR67A
8
VCCIO
VCCIO8
8
GNDIO8
-
C
WRITEN***
8
CS1N***
T
CS1N***
8
CSN***
C
CSN***
8
D0/SPIFASTN***
T
D0/SPIFASTN***
Differential
C
C
T
C
T
8
8
W19
PR66B
8
D1***
C
D1***
8
Y20
PR66A
8
D2***
T
D2***
8
D3***
C
D3***
8
W22
PR65B
8
GNDIO
GNDIO8
-
W18
PR65A
8
D4***
T
D4***
8
-
Y23
PR64B
8
D5***
C
D5***
8
AA24
PR64A
8
D6***
T
D6***
8
W21
PR63B
8
D7***
C
D7***
8
VCCIO
VCCIO8
8
VCCIO8
8
V20
PR63A
8
T
DI/CSSPI0N***
8
DOUT/CSON/
CSSPI1N***
8
W23
Dual Function
DI/CSSPI0N***
PR62B
8
DOUT/CSON/CSSPI1N***
C
Y24
PR62A
8
BUSY/SISPI***
T
V19
RLM0_PLLCAP
3
V21
PR60B
3
GNDIO
GNDIO3
-
RLM0_GDLLC_FB_A
C
BUSY/SISPI***
8
RLM0_PLLCAP
3
PR65B
3
GNDIO3
-
RLM0_GDLLC_FB_A
C
U19
PR60A
3
RLM0_GDLLT_FB_A/RDQ57
T
PR65A
3
RLM0_GDLLT_FB_A
T
AA26
PR59B
3
RLM0_GDLLC_IN_A**/RDQ57
C (LVDS)*
PR64B
3
RLM0_GDLLC_IN_A
C*
Y26
PR59A
3
RLM0_GDLLT_IN_A**/RDQ57
T (LVDS)*
PR64A
3
RLM0_GDLLT_IN_A
T*
V23
PR58B
3
RLM0_GPLLC_IN_A**/RDQ57
C
PR63B
3
RLM0_GPLLC_IN_A
C
VCCIO
VCCIO3
3
VCCIO3
3
U20
PR58A
3
RLM0_GPLLT_IN_A**/RDQ57
T
PR63A
3
RLM0_GPLLT_IN_A
T
W24
PR57B
3
RLM0_GPLLC_FB_A/RDQ57
C (LVDS)*
PR62B
3
RLM0_GPLLC_FB_A
C*
RLM0_GPLLT_FB_A/RDQS57
T (LVDS)*
RLM0_GPLLT_FB_A
T*
V24
PR57A
3
GNDIO
GNDIO3
-
U21
PR56A
3
RDQ57
W25
PR55B
3
RDQ57
PR62A
3
GNDIO3
-
T
PR60A
3
T
C (LVDS)*
PR59B
3
C*
4-173
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
W26
PR55A
3
RDQ57
Bank
T (LVDS)*
PR59A
3
VCCIO
VCCIO3
3
VCCIO3
3
U18
PR54B
3
RDQ57
C
PR58B
3
U22
PR54A
3
RDQ57
T
PR58A
3
T
V25
PR53B
3
RDQ57
C (LVDS)*
PR57B
3
C*
Dual Function
Differential
T*
C
V26
PR53A
3
RDQ57
T (LVDS)*
PR57A
3
U24
PR51B
3
RDQ48
C
PR55B
3
RDQ52
T*
C
T24
PR51A
3
RDQ48
T
PR55A
3
RDQ52
T
GNDIO
GNDIO3
-
GNDIO3
-
T22
PR50B
3
RDQ48
C (LVDS)*
PR54B
3
RDQ52
C*
T23
PR50A
3
RDQ48
T (LVDS)*
PR54A
3
RDQ52
T*
U25
PR49B
3
RDQ48
C
PR53B
3
RDQ52
C
U26
PR49A
3
RDQ48
T
PR53A
3
RDQ52
T
VCCIO
VCCIO3
3
VCCIO3
3
T19
PR48B
3
RDQ48
C (LVDS)*
PR52B
3
RDQ52
C*
R19
PR48A
3
RDQS48
T (LVDS)*
PR52A
3
RDQS52
T*
R21
PR47B
3
RDQ48
C
PR51B
3
RDQ52
C
GNDIO
GNDIO3
-
GNDIO3
-
R20
PR47A
3
RDQ48
T
PR51A
3
RDQ52
T
T26
PR46B
3
RDQ48
C (LVDS)*
PR50B
3
RDQ52
C*
R26
PR46A
3
RDQ48
T (LVDS)*
PR50A
3
RDQ52
T*
P21
PR45B
3
RDQ48
C
PR49B
3
RDQ52
C
VCCIO
VCCIO3
3
VCCIO3
3
P19
PR45A
3
RDQ48
T
PR49A
3
RDQ52
T
R23
PR44B
3
RDQ48
C (LVDS)*
PR48B
3
RDQ52
C*
R24
PR44A
3
RDQ48
T (LVDS)*
PR48A
3
RDQ52
T*
-
-
-
GNDIO3
RLM3_SPLLC_FB_A
C
R22
PR42B
3
VCCIO
VCCIO3
3
N19
PR42A
3
RLM2_SPLLT_FB_A
P23
PR41B
3
RLM2_SPLLC_IN_A
RLM2_SPLLT_IN_A
T (LVDS)*
P24
PR41A
3
GNDIO
GNDIO3
-
N21
PR40B
3
P22
PR40A
3
N20
PR39B
RLM2_SPLLC_FB_A
C
PR46B
3
VCCIO3
3
T
PR46A
3
RLM3_SPLLT_FB_A
T
C (LVDS)*
PR45B
3
RLM3_SPLLC_IN_A
C*
RLM3_SPLLT_IN_A
T*
PR45A
3
GNDIO3
-
C
PR44B
3
T
PR44A
3
T
3
C (LVDS)*
PR43B
3
C*
T (LVDS)*
PR43A
3
T*
VCCIO3
3
C
N22
PR39A
3
VCCIO
VCCIO3
3
P25
PR38B
3
VREF2_3
C
PR42B
3
VREF2_3
P26
PR38A
3
VREF1_3
T
PR42A
3
VREF1_3
T
M21
PR37B
3
PCLKC3_0
C (LVDS)*
PR41B
3
PCLKC3_0
C*
N23
PR37A
3
PCLKT3_0
T (LVDS)*
PR41A
3
PCLKT3_0
T*
N24
PR35B
2
PCLKC2_0/RDQ32
C
PR39B
2
PCLKC2_0/RDQ36
C
N25
PR35A
2
PCLKT2_0/RDQ32
T
PR39A
2
PCLKT2_0/RDQ36
T
GNDIO
GNDIO2
-
GNDIO2
-
M22
PR34B
2
RDQ32
C (LVDS)*
PR38B
2
RDQ36
C*
M24
PR34A
2
RDQ32
T (LVDS)*
PR38A
2
RDQ36
T*
M23
PR33B
2
RDQ32
C
PR37B
2
RDQ36
C
N26
PR33A
2
RDQ32
T
PR37A
2
RDQ36
T
4-174
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO2
2
L22
PR32B
2
RDQ32
L24
PR32A
2
RDQS32
L23
PR31B
2
RDQ32
GNDIO
GNDIO2
-
M20
PR31A
2
RDQ32
M26
PR30B
2
RDQ32
Dual Function
Ball/Pad
Function
Bank
VCCIO2
2
C (LVDS)*
PR36B
T (LVDS)*
PR36A
C
Differential
Dual Function
Differential
2
RDQ36
C*
2
RDQS36
T*
PR35B
2
RDQ36
C
GNDIO2
-
T
PR35A
2
RDQ36
T
C (LVDS)*
PR34B
2
RDQ36
C*
L26
PR30A
2
RDQ32
T (LVDS)*
PR34A
2
RDQ36
T*
K22
PR29B
2
RUM1_SPLLC_FB_A/RDQ32
C
PR33B
2
RUM3_SPLLC_FB_A/RDQ36
C
VCCIO
VCCIO2
2
VCCIO2
2
M19
PR29A
2
RUM1_SPLLT_FB_A/RDQ32
T
PR33A
2
RUM3_SPLLT_FB_A/RDQ36
T
K25
PR28B
2
RUM1_SPLLC_IN_A/RDQ32
C (LVDS)*
PR32B
2
RUM3_SPLLC_IN_A/RDQ36
C*
K26
PR28A
2
RUM1_SPLLT_IN_A/RDQ32
T (LVDS)*
PR32A
2
RUM3_SPLLT_IN_A/RDQ36
T*
K24
PR26B
2
RDQ23
C
PR30B
2
RDQ27
C
K23
PR26A
2
RDQ23
T
PR30A
2
RDQ27
T
GNDIO
GNDIO2
-
GNDIO2
-
L19
PR25B
2
RDQ23
C (LVDS)*
PR29B
2
RDQ27
C*
K21
PR25A
2
RDQ23
T (LVDS)*
PR29A
2
RDQ27
T*
J23
PR24B
2
RDQ23
C
PR28B
2
RDQ27
C
J24
PR24A
2
RDQ23
T
PR28A
2
RDQ27
T
VCCIO
VCCIO2
2
VCCIO2
2
K20
PR23B
2
RDQ23
C (LVDS)*
PR27B
2
RDQ27
C*
J21
PR23A
2
RDQS23
T (LVDS)*
PR27A
2
RDQS27
T*
H21
PR22B
2
RDQ23
C
PR26B
2
RDQ27
C
GNDIO
GNDIO2
-
GNDIO2
-
K18
PR22A
2
RDQ23
T
PR26A
2
RDQ27
T
H22
PR21B
2
RDQ23
C (LVDS)*
PR25B
2
RDQ27
C*
J20
PR21A
2
RDQ23
T (LVDS)*
PR25A
2
RDQ27
T*
J25
PR20B
2
RDQ23
C
PR24B
2
RDQ27
C
VCCIO
VCCIO2
2
VCCIO2
2
J26
PR20A
2
RDQ23
T
PR24A
2
RDQ27
T
G21
PR19B
2
RDQ23
C (LVDS)*
PR23B
2
RDQ27
C*
RDQ23
T (LVDS)*
PR23A
2
RDQ27
T*
GNDIO2
-
J19
PR19A
2
GNDIO
GNDIO2
-
H23
PR18B
2
RDQ15
C
PR21B
2
H24
PR18A
2
RDQ15
T
PR21A
2
T
H25
PR17B
2
RDQ15
C (LVDS)*
PR20B
2
C*
H26
PR17A
2
RDQ15
T (LVDS)*
PR20A
2
T*
VCCIO
VCCIO2
2
VCCIO2
2
C
G22
PR16B
2
RDQ15
C
PR19B
2
K19
PR16A
2
RDQ15
T
PR19A
2
T
G24
PR15B
2
RDQ15
C (LVDS)*
PR18B
2
C*
RDQS15
T (LVDS)*
T*
G23
PR15A
2
GNDIO
GNDIO2
-
PR18A
2
GNDIO2
-
C
J18
PR14B
2
RDQ15
C
PR14B
2
C
F22
PR14A
2
RDQ15
T
PR14A
2
T
-
-
-
VCCIO2
2
F23
PR13B
2
RDQ15
C (LVDS)*
PR13B
2
C*
F24
PR13A
2
RDQ15
T (LVDS)*
PR13A
2
T*
4-175
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO2
2
H20
PR12B
2
-
-
-
Dual Function
RUM0_SPLLC_FB_A/RDQ15
LFE2M50E/SE
Differential
C
Ball/Pad
Function
Bank
-
-
PR12B
2
GNDIO2
-
Dual Function
Differential
RUM0_SPLLC_FB_A
C
F21
PR12A
2
RUM0_SPLLT_FB_A/RDQ15
T
PR12A
2
RUM0_SPLLT_FB_A
T
G26
PR11B
2
RUM0_SPLLC_IN_A/RDQ15
C (LVDS)*
PR11B
2
RUM0_SPLLC_IN_A
C*
F26
PR11A
2
RUM0_SPLLT_IN_A/RDQ15
T (LVDS)*
RUM0_SPLLT_IN_A
T*
-
-
-
E24
PR9B
2
VREF2_2
C
GNDIO
GNDIO2
-
E23
PR9A
2
VREF1_2
T
VCCIO
VCCIO4
4
H19
XRES
-
XRES
-
C25
URC_SQ_VCCRX
0
12
URC_SQ_VCCRX0
12
A24
URC_SQ_HDINP0
12
URC_SQ_HDINP0
12
B25
URC_SQ_VCCIB0
12
URC_SQ_VCCIB0
12
B24
URC_SQ_HDINN0
12
URC_SQ_HDINN0
12
C22
URC_SQ_VCCTX
0
12
URC_SQ_VCCTX0
12
A21
URC_SQ_HDOUT
P0
12
URC_SQ_HDOUTP0
12
A22
URC_SQ_VCCOB
0
12
URC_SQ_VCCOB0
12
B21
URC_SQ_HDOUT
N0
12
URC_SQ_HDOUTN0
12
C21
URC_SQ_VCCTX
1
12
URC_SQ_VCCTX1
12
B20
URC_SQ_HDOUT
N1
12
URC_SQ_HDOUTN1
12
C20
URC_SQ_VCCOB
1
12
URC_SQ_VCCOB1
12
A20
URC_SQ_HDOUT
P1
12
URC_SQ_HDOUTP1
12
C24
URC_SQ_VCCRX
1
12
URC_SQ_VCCRX1
12
B23
URC_SQ_HDINN1
12
C23
URC_SQ_VCCIB1
12
A23
URC_SQ_HDINP1
12
B19
URC_SQ_VCCAU
X33
12
E19
URC_SQ_REFCL
KN
12
D19
URC_SQ_REFCL
KP
12
C19
URC_SQ_VCCP
12
A15
URC_SQ_HDINP2
12
C15
URC_SQ_VCCIB2
12
B15
URC_SQ_HDINN2
12
C14
URC_SQ_VCCRX
2
12
A18
URC_SQ_HDOUT
P2
12
C18
URC_SQ_VCCOB
2
12
B18
URC_SQ_HDOUT
N2
12
VREF2_2
VREF1_2
C
T
T
C
T
C
C
T
C
PR11A
2
VCCIO2
2
PR9B
2
GNDIO2
-
PR9A
2
VCCIO2
2
T
C
T
C
C
T
URC_SQ_HDINN1
12
URC_SQ_VCCIB1
12
URC_SQ_HDINP1
12
URC_SQ_VCCAUX33
12
C
URC_SQ_REFCLKN
12
C
T
URC_SQ_REFCLKP
12
T
URC_SQ_VCCP
12
T
URC_SQ_HDINP2
12
URC_SQ_VCCIB2
12
URC_SQ_HDINN2
12
URC_SQ_VCCRX2
12
URC_SQ_HDOUTP2
12
URC_SQ_VCCOB2
12
URC_SQ_HDOUTN2
12
T
C
T
C
4-176
C
T
T
C
T
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
C17
URC_SQ_VCCTX
2
12
B17
URC_SQ_HDOUT
N3
12
A16
URC_SQ_VCCOB
3
12
A17
URC_SQ_HDOUT
P3
12
C16
URC_SQ_VCCTX
3
12
B14
URC_SQ_HDINN3
12
B13
URC_SQ_VCCIB3
12
A14
URC_SQ_HDINP3
12
C13
URC_SQ_VCCRX
3
-
-
-
LFE2M50E/SE
Ball/Pad
Function
Bank
URC_SQ_VCCTX2
12
URC_SQ_HDOUTN3
12
URC_SQ_VCCOB3
12
URC_SQ_HDOUTP3
12
URC_SQ_VCCTX3
12
URC_SQ_HDINN3
12
URC_SQ_VCCIB3
12
URC_SQ_HDINP3
12
12
URC_SQ_VCCRX3
12
-
GNDIO1
-
-
-
VCCIO1
1
Dual Function
Differential
C
T
C
T
Dual Function
Differential
C
T
C
T
E17
PT46B
1
C
PT55B
1
C
D17
PT46A
1
T
PT55A
1
T
GNDIO
GNDIO1
-
GNDIO1
-
F17
PT45B
1
C
PT54B
1
D16
PT45A
1
T
PT54A
1
T
F19
PT44B
1
C
PT53B
1
C
T
T
F18
PT44A
1
VCCIO
VCCIO1
1
PT53A
1
VCCIO1
1
C
E16
PT43B
1
C
PT52B
1
D15
PT43A
1
T
PT52A
1
T
G18
PT42B
1
C
PT51B
1
C
E15
PT42A
1
T
T
GNDIO
GNDIO1
-
PT51A
1
GNDIO1
-
C
G17
PT41B
1
C
PT50B
1
E14
PT41A
1
T
PT50A
1
T
D14
PT40B
1
C
PT49B
1
C
D13
PT40A
1
T
T
VCCIO
VCCIO1
1
PT49A
1
VCCIO1
1
C
F15
PT39B
1
VREF2_1
C
PT48B
1
VREF2_1
E12
PT39A
1
VREF1_1
T
PT48A
1
VREF1_1
C
T
H17
PT38B
1
PCLKC1_0
C
PT47B
1
PCLKC1_0
C
E13
PT38A
1
PCLKT1_0
T
PT47A
1
PCLKT1_0
T
C12
PT37B
0
PCLKC0_0
C
PT46B
0
PCLKC0_0
C
GNDIO
GNDIO0
-
GNDIO0
-
G15
PT37A
0
PCLKT0_0
T
PT46A
0
PCLKT0_0
T
C11
PT36B
0
VREF2_0
C
PT45B
0
VREF2_0
C
VREF1_0
VREF1_0
F14
PT36A
0
A12
PT35B
0
T
PT45A
0
C
PT44B
0
VCCIO
VCCIO0
0
VCCIO0
0
A11
PT35A
0
T
PT44A
0
T
D12
PT34B
0
C
PT43B
0
C
H16
PT34A
0
T
PT43A
0
T
H18
PT33B
0
C
PT42B
0
C
H15
PT33A
0
T
PT42A
0
T
A10
PT32B
0
C
PT41B
0
C
4-177
T
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
GNDIO
GNDIO0
-
Dual Function
LFE2M50E/SE
Differential
Ball/Pad
Function
Bank
GNDIO0
-
Dual Function
Differential
B10
PT32A
0
T
PT41A
0
T
D11
PT31B
0
C
PT40B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
G14
PT31A
0
T
PT40A
0
T
E11
PT30B
0
C
PT39B
0
C
F13
PT30A
0
T
PT39A
0
T
D10
PT29B
0
C
PT38B
0
C
T
PT38A
0
T
GNDIO0
-
H14
PT29A
0
GNDIO
GNDIO0
-
VCCIO
VCCIO0
0
VCCIO0
0
A9
PT24B
0
C
PT24B
0
C
C10
PT23B
0
C
PT23B
0
C
GNDIO
GNDIO0
-
GNDIO0
-
E8
PT23A
0
T
PT23A
0
T
B9
PT22B
0
C
PT22B
0
C
A8
PT22A
0
T
T
VCCIO
VCCIO0
0
PT22A
0
VCCIO0
0
F12
PT21B
0
C
PT21B
0
E10
PT21A
0
T
PT21A
0
C
T
G13
PT20B
0
C
PT20B
0
C
C9
PT20A
0
T
PT20A
0
T
B8
PT19B
0
C
PT19B
0
C
GNDIO
GNDIO0
-
GNDIO0
-
A7
PT19A
0
T
PT19A
0
T
D9
PT18B
0
C
PT18B
0
C
H13
PT18A
0
T
PT18A
0
T
D6
PT17B
0
C
PT17B
0
C
T
T
C7
PT17A
0
VCCIO
VCCIO0
0
PT17A
0
VCCIO0
0
C8
PT16B
0
C
PT16B
0
G12
PT16A
0
T
PT16A
0
T
D8
PT15B
0
C
PT15B
0
C
T
T
H12
PT15A
0
GNDIO
GNDIO0
-
A6
PT14B
0
A5
PT14A
0
A4
PT13B
C
PT15A
0
GNDIO0
-
C
PT14B
0
T
PT14A
0
T
0
C
PT13B
0
C
T
T
A3
PT13A
0
VCCIO
VCCIO0
0
PT13A
0
VCCIO0
0
C
C6
PT12B
0
C
PT12B
0
F10
PT12A
0
T
PT12A
0
T
D7
PT11B
0
C
PT11B
0
C
H11
PT11A
0
T
PT11A
0
T
D5
PT10B
0
C
PT10B
0
C
GNDIO
GNDIO0
-
GNDIO0
-
E6
PT10A
0
T
PT10A
0
T
G10
PT9B
0
C
PT9B
0
C
F9
PT9A
0
T
PT9A
0
T
4-178
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
H10
PT8B
0
VCCIO
VCCIO0
0
E7
PT8A
0
T
PT8A
0
T
B3
PT7B
0
C
PT7B
0
C
C5
PT7A
0
T
PT7A
0
T
B2
PT6B
0
C
PT6B
0
C
Dual Function
Differential
Ball/Pad
Function
Bank
C
PT8B
0
VCCIO0
0
Dual Function
Differential
C
C4
PT6A
0
T
PT6A
0
T
G9
PT5B
0
C
PT5B
0
C
GNDIO
GNDIO0
-
GNDIO0
-
F7
PT5A
0
T
PT5A
0
T
C3
PT4B
0
C
PT4B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
D4
PT4A
0
T
PT4A
0
T
J10
PT3B
0
C
PT3B
0
C
F8
PT3A
0
T
PT3A
0
T
G8
PT2B
0
C
PT2B
0
C
T
T
G7
PT2A
0
PT2A
0
L12
VCC
-
VCC
-
L13
VCC
-
VCC
-
L14
VCC
-
VCC
-
L15
VCC
-
VCC
-
M11
VCC
-
VCC
-
M12
VCC
-
VCC
-
M15
VCC
-
VCC
-
M16
VCC
-
VCC
-
N11
VCC
-
VCC
-
N16
VCC
-
VCC
-
P11
VCC
-
VCC
-
P16
VCC
-
VCC
-
R11
VCC
-
VCC
-
R12
VCC
-
VCC
-
R15
VCC
-
VCC
-
R16
VCC
-
VCC
-
T12
VCC
-
VCC
-
T13
VCC
-
VCC
-
T14
VCC
-
VCC
-
T15
VCC
-
VCC
-
B12
VCCIO0
0
VCCIO0
0
0
B7
VCCIO0
0
VCCIO0
F11
VCCIO0
0
VCCIO0
0
J13
VCCIO0
0
VCCIO0
0
K12
VCCIO0
0
VCCIO0
1
D18
VCCIO1
1
VCCIO1
1
F16
VCCIO1
1
VCCIO1
1
J14
VCCIO1
1
VCCIO1
1
1
K15
VCCIO1
1
VCCIO1
G25
VCCIO2
2
VCCIO2
2
L21
VCCIO2
2
VCCIO2
2
M17
VCCIO2
2
VCCIO2
2
4-179
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
M25
VCCIO2
N18
P18
LFE2M50E/SE
Ball/Pad
Function
Bank
2
VCCIO2
2
VCCIO2
2
VCCIO2
2
VCCIO3
3
VCCIO3
3
R17
VCCIO3
3
VCCIO3
3
R25
VCCIO3
3
VCCIO3
3
T21
VCCIO3
3
VCCIO3
3
Y25
VCCIO3
3
VCCIO3
3
Dual Function
Differential
AA16
VCCIO4
4
VCCIO4
4
AC18
VCCIO4
4
VCCIO4
4
U15
VCCIO4
4
VCCIO4
4
V14
VCCIO4
4
VCCIO4
4
AA11
VCCIO5
5
VCCIO5
5
V13
VCCIO5
5
VCCIO5
5
AE12
VCCIO5
5
VCCIO5
5
AE7
VCCIO5
5
VCCIO5
5
U12
VCCIO5
5
VCCIO5
5
P9
VCCIO6
6
VCCIO6
6
R10
VCCIO6
6
VCCIO6
6
R2
VCCIO6
6
VCCIO6
6
T6
VCCIO6
6
VCCIO6
6
Y2
VCCIO6
6
VCCIO6
6
G2
VCCIO7
7
VCCIO7
7
L6
VCCIO7
7
VCCIO7
7
M10
VCCIO7
7
VCCIO7
7
M2
VCCIO7
7
VCCIO7
7
N9
VCCIO7
7
VCCIO7
7
AC24
VCCIO8
8
VCCIO8
8
U17
VCCIO8
8
VCCIO8
8
J11
VCCAUX
-
VCCAUX
-
J12
VCCAUX
-
VCCAUX
-
J15
VCCAUX
-
VCCAUX
-
J16
VCCAUX
-
VCCAUX
-
L18
VCCAUX
-
VCCAUX
-
L9
VCCAUX
-
VCCAUX
-
M18
VCCAUX
-
VCCAUX
-
M9
VCCAUX
-
VCCAUX
-
R18
VCCAUX
-
VCCAUX
-
R9
VCCAUX
-
VCCAUX
T18
VCCAUX
-
VCCAUX
-
T9
VCCAUX
-
VCCAUX
-
V11
VCCAUX
-
VCCAUX
-
V12
VCCAUX
-
VCCAUX
-
V15
VCCAUX
-
VCCAUX
-
V16
VCCAUX
-
VCCAUX
-
A13
GND
-
GND
-
A19
GND
-
GND
-
A2
GND
-
GND
-
A25
GND
-
GND
-
AA2
GND
-
GND
-
4-180
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
AA25
GND
AB18
AB22
LFE2M50E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
AB5
GND
-
GND
-
AB9
GND
-
GND
-
AE1
GND
-
GND
-
AE11
GND
-
GND
-
AE16
GND
-
GND
-
AE22
GND
-
GND
-
AE26
GND
-
GND
-
AE6
GND
-
GND
-
AF13
GND
-
GND
-
AF19
GND
-
GND
-
AF2
GND
-
GND
-
Dual Function
Differential
AF25
GND
-
GND
-
B1
GND
-
GND
-
B11
GND
-
GND
-
B16
GND
-
GND
-
B22
GND
-
GND
-
B26
GND
-
GND
-
B6
GND
-
GND
-
E18
GND
-
GND
-
E22
GND
-
GND
-
E5
GND
-
GND
-
E9
GND
-
GND
-
F2
GND
-
GND
-
F25
GND
-
GND
-
G11
GND
-
GND
-
G16
GND
-
GND
-
J22
GND
-
GND
-
J5
GND
-
GND
-
K11
GND
-
GND
-
K13
GND
-
GND
-
K14
GND
-
GND
-
K16
GND
-
GND
-
L10
GND
-
GND
-
L11
GND
-
GND
-
L16
GND
-
GND
-
L17
GND
-
GND
-
L2
GND
-
GND
-
L20
GND
-
GND
-
L25
GND
-
GND
-
L7
GND
-
GND
-
M13
GND
-
GND
-
M14
GND
-
GND
-
N10
GND
-
GND
-
N12
GND
-
GND
-
N13
GND
-
GND
-
N14
GND
-
GND
-
4-181
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
N15
GND
N17
P10
LFE2M50E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
P12
GND
-
GND
-
P13
GND
-
GND
-
P14
GND
-
GND
-
P15
GND
-
GND
-
P17
GND
-
GND
-
R13
GND
-
GND
-
R14
GND
-
GND
-
T10
GND
-
GND
-
T11
GND
-
GND
-
T16
GND
-
GND
-
T17
GND
-
GND
-
T2
GND
-
GND
-
T20
GND
-
GND
-
T25
GND
-
GND
-
T7
GND
-
GND
-
U11
GND
-
GND
-
U13
GND
-
GND
-
U14
GND
-
GND
-
U16
GND
-
GND
-
V22
GND
-
GND
-
V5
GND
-
GND
-
Y11
GND
-
GND
-
Y16
GND
-
GND
-
AB3
NC
-
NC
-
Dual Function
Differential
AB4
NC
-
NC
-
AC1
NC
-
NC
-
AC2
NC
-
NC
-
B4
NC
-
NC
-
B5
NC
-
NC
-
C26
NC
-
NC
-
D20
NC
-
NC
-
D21
NC
-
NC
-
D22
NC
-
NC
-
D23
NC
-
NC
-
D24
NC
-
NC
-
D25
NC
-
NC
-
D26
NC
-
NC
-
E20
NC
-
NC
-
E21
NC
-
NC
-
E25
NC
-
NC
-
E26
NC
-
NC
-
F20
NC
-
NC
-
G20
NC
-
NC
-
K10
NC
-
NC
-
K17
NC
-
NC
-
R4
NC
-
NC
-
4-182
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M35E/SE and LFE2M50E/SE Logic Signal Connections: 672 fpBGA
LFE2M35E/SE
Ball
Number
Ball/Pad
Function
Bank
U10
NC
U23
V10
LFE2M50E/SE
Ball/Pad
Function
Bank
-
NC
-
NC
-
NC
-
NC
-
NC
-
W7
NC
-
NC
-
AB21
PB69B
4
BDQ69
C
NC
-
AC20
PB58A
4
BDQ60
T
NC
-
AC21
PB63A
4
BDQ60
T
NC
-
AC22
PB69A
4
BDQS69****
T
NC
-
AC23
PB71A
4
BDQ69
T
NC
-
Dual Function
Differential
AC25
PB71B
4
BDQ69
C
NC
-
AD26
PB70B
4
BDQ69
C
NC
-
W20
PB72B
4
BDQ69
C
NC
-
H7
L_VCCPLL
-
L_VCCPLL
-
K6
L_VCCPLL
-
L_VCCPLL
-
P7
L_VCCPLL
-
L_VCCPLL
R8
L_VCCPLL
-
L_VCCPLL
-
V18
R_VCCPLL
-
R_VCCPLL
-
P20
R_VCCPLL
-
R_VCCPLL
-
J17
R_VCCPLL
-
R_VCCPLL
-
G19
R_VCCPLL
-
R_VCCPLL
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
*** For density migration, board design must take into account that these sysCONFIG pins are dual function for the lower density devices
(ECP2M20 and ECP2M35) and are dedicated pins for the higher density devices (ECP2M50, ECP2M70 and ECP2M100).
****Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-183
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO7
7
D2
PL9A
7
VREF2_7/LDQ6
D3
PL9B
7
VREF1_7/LDQ6
GNDIO
GNDIO7
-
GNDIO7
-
J8
PL11A
7
LUM0_SPLLT_IN_A
T (LVDS)*
PL11A
7
LUM0_SPLLT_IN_A/LDQ15
T (LVDS)*
H7
PL11B
7
LUM0_SPLLC_IN_A
C (LVDS)*
PL11B
7
LUM0_SPLLC_IN_A/LDQ15
C (LVDS)*
E3
PL12A
7
LUM0_SPLLT_FB_A
T
PL12A
7
LUM0_SPLLT_FB_A/LDQ15
T
E4
PL12B
7
LUM0_SPLLC_FB_A
C
PL12B
7
LUM0_SPLLC_FB_A/LDQ15
C
GNDIO
GNDIO7
-
-
-
-
-
-
VCCIO7
7
Dual Function
Ball/Pad
Function
Bank
VCCIO7
7
T
PL9A
7
VREF2_7
T
C
PL9B
7
VREF1_7
C
Differential
Dual Function
Differential
G6
PL13A
7
T (LVDS)*
PL13A
7
LDQ15
T (LVDS)*
F5
PL13B
7
C (LVDS)*
PL13B
7
LDQ15
C (LVDS)*
E2
PL14A
7
T
PL14A
7
LDQ15
T
D1
PL14B
7
C
PL14B
7
LDQ15
C
-
-
-
GNDIO7
-
G5
NC
-
PL15A
7
LDQS15
T (LVDS)*
G4
NC
-
PL15B
7
LDQ15
C (LVDS)*
K7
NC
-
PL16A
7
LDQ15
T
-
-
-
VCCIO7
7
K8
NC
-
PL16B
7
LDQ15
C
E1
NC
-
PL17A
7
LDQ15
T (LVDS)*
F2
NC
-
PL17B
7
LDQ15
C (LVDS)*
F1
NC
-
PL18A
7
LDQ15
T
-
-
-
GNDIO7
-
G3
NC
-
PL18B
7
LDQ15
C
-
-
-
-
-
VCCIO
VCCIO7
7
VCCIO7
7
H5
PL15A
7
T (LVDS)*
PL21A
7
T (LVDS)*
H4
PL15B
7
C (LVDS)*
PL21B
7
C (LVDS)*
J5
PL16A
7
T
PL22A
7
T
J4
PL16B
7
C
PL22B
7
C
GNDIO
GNDIO7
-
GNDIO7
-
G2
NC
-
PL24A
7
LDQ28
T (LVDS)*
G1
NC
-
PL24B
7
LDQ28
C (LVDS)*
L9
NC
-
PL25A
7
LDQ28
T
L7
NC
-
PL25B
7
LDQ28
C
-
-
-
VCCIO7
7
K6
NC
-
PL26A
7
LDQ28
T (LVDS)*
K5
NC
-
PL26B
7
LDQ28
C (LVDS)*
L8
NC
-
PL27A
7
LDQ28
T
L6
NC
-
PL27B
7
LDQ28
C
-
-
-
GNDIO7
-
H3
PL18A
7
T (LVDS)*
PL28A
7
LDQS28
T (LVDS)*
H2
PL18B
7
C (LVDS)*
PL28B
7
LDQ28
C (LVDS)*
N8
PL19A
7
T
LDQ28
T
-
-
-
PL29A
7
VCCIO7
7
M9
PL19B
7
C
PL29B
7
LDQ28
C
J3
PL20A
7
T (LVDS)*
PL30A
7
LDQ28
T (LVDS)*
VCCIO
VCCIO7
7
-
-
4-184
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
J2
PL20B
7
H1
PL21A
7
GNDIO
GNDIO7
-
J1
PL21B
7
-
-
-
LFE2M70E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
Dual Function
Differential
C (LVDS)*
PL30B
7
LDQ28
C (LVDS)*
T
PL31A
7
LDQ28
T
GNDIO7
-
PL31B
7
LDQ28
C
-
-
C
-
-
-
-
-
L5
PL23A
7
LDQ27
T (LVDS)*
PL33A
7
LDQ37
T (LVDS)*
L4
PL23B
7
LDQ27
C (LVDS)*
PL33B
7
LDQ37
C (LVDS)*
N9
PL24A
7
LDQ27
T
PL34A
7
LDQ37
T
N7
PL24B
7
LDQ27
C
PL34B
7
LDQ37
C
VCCIO
VCCIO7
7
VCCIO7
7
K2
PL25A
7
LDQ27
T (LVDS)*
PL35A
7
LDQ37
T (LVDS)*
K1
PL25B
7
LDQ27
C (LVDS)*
PL35B
7
LDQ37
C (LVDS)*
P9
PL26A
7
LDQ27
T
PL36A
7
LDQ37
T
P7
PL26B
7
LDQ27
C
PL36B
7
LDQ37
C
GNDIO
GNDIO7
-
GNDIO7
-
M6
PL27A
7
LDQS27
T (LVDS)*
PL37A
7
LDQS37
T (LVDS)*
M5
PL27B
7
LDQ27
C (LVDS)*
PL37B
7
LDQ37
C (LVDS)*
LDQ27
T
LDQ37
T
N5
PL28A
7
VCCIO
VCCIO7
7
N6
PL28B
7
LDQ27
M4
PL29A
7
LDQ27
PL38A
7
VCCIO7
7
C
PL38B
7
LDQ37
C
T (LVDS)*
PL39A
7
LDQ37
T (LVDS)*
M3
PL29B
7
LDQ27
C (LVDS)*
PL39B
7
LDQ37
C (LVDS)*
P6
PL30A
7
LDQ27
T
PL40A
7
LDQ37
T
GNDIO
GNDIO7
-
GNDIO7
-
P8
PL30B
7
LDQ27
C
PL40B
7
LDQ37
C
L3
PL32A
7
LUM3_SPLLT_IN_A/LDQ36
T (LVDS)*
PL42A
7
LUM3_SPLLT_IN_A/LDQ46
T (LVDS)*
C (LVDS)*
L2
PL32B
7
LUM3_SPLLC_IN_A/LDQ36
C (LVDS)*
PL42B
7
LUM3_SPLLC_IN_A/LDQ46
P5
PL33A
7
LUM3_SPLLT_FB_A/LDQ36
T
PL43A
7
LUM3_SPLLT_FB_A/LDQ46
T
P4
PL33B
7
LUM3_SPLLC_FB_A/LDQ36
C
PL43B
7
LUM3_SPLLC_FB_A/LDQ46
C
VCCIO
VCCIO7
7
VCCIO7
7
L1
PL34A
7
LDQ36
T (LVDS)*
PL44A
7
LDQ46
T (LVDS)*
M2
PL34B
7
LDQ36
C (LVDS)*
PL44B
7
LDQ46
C (LVDS)*
R5
PL35A
7
LDQ36
T
PL45A
7
LDQ46
T
R4
PL35B
7
LDQ36
C
PL45B
7
LDQ46
C
GNDIO
GNDIO7
-
GNDIO7
-
M1
PL36A
7
LDQS36
T (LVDS)*
PL46A
7
LDQS46
T (LVDS)*
N2
PL36B
7
LDQ36
C (LVDS)*
PL46B
7
LDQ46
C (LVDS)*
LDQ36
T
LDQ46
T
R8
PL37A
7
VCCIO
VCCIO7
7
T9
PL37B
7
LDQ36
P3
PL38A
7
LDQ36
PL47A
7
VCCIO7
7
C
PL47B
7
LDQ46
C
T (LVDS)*
PL48A
7
LDQ46
T (LVDS)*
P2
PL38B
7
LDQ36
C (LVDS)*
PL48B
7
LDQ46
C (LVDS)*
N1
PL39A
7
PCLKT7_0/LDQ36
T
PL49A
7
PCLKT7_0/LDQ46
T
GNDIO
GNDIO7
-
GNDIO7
-
P1
PL39B
7
PCLKC7_0/LDQ36
C
PL49B
7
PCLKC7_0/LDQ46
C
T5
PL41A
6
PCLKT6_0
T (LVDS)*
PL51A
6
PCLKT6_0/LDQ55
T (LVDS)*
T4
PL41B
6
PCLKC6_0
C (LVDS)*
PL51B
6
PCLKC6_0/LDQ55
C (LVDS)*
U7
PL42A
6
VREF2_6
T
PL52A
6
VREF2_6/LDQ55
T
4-185
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
T8
PL42B
6
VREF1_6
Bank
Dual Function
C
PL52B
6
VREF1_6/LDQ55
R3
PL43A
6
C
T (LVDS)*
PL53A
6
LDQ55
T (LVDS)*
VCCIO
VCCIO6
6
VCCIO6
6
R2
PL43B
6
C (LVDS)*
PL53B
6
R1
PL44A
6
T
LDQ55
C (LVDS)*
PL54A
6
LDQ55
T1
PL44B
6
C
T
PL54B
6
LDQ55
C
GNDIO
GNDIO6
-
GNDIO6
-
-
-
-
VCCIO6
6
T3
PL45A
6
LLM3_SPLLT_IN_A
T (LVDS)*
PL57A
6
LLM3_SPLLT_IN_A/LDQ55
T (LVDS)*
T2
PL45B
6
LLM3_SPLLC_IN_A
C (LVDS)*
PL57B
6
LLM3_SPLLC_IN_A/LDQ55
C (LVDS)*
U9
PL46A
6
LLM3_SPLLT_FB_A
T
PL58A
6
LLM3_SPLLT_FB_A/LDQ55
T
U8
PL46B
6
LLM3_SPLLC_FB_A
C
PL58B
6
LLM3_SPLLC_FB_A/LDQ55
C
VCCIO
VCCIO6
6
GNDIO6
-
U5
PL48A
6
LDQ52
T (LVDS)*
PL60A
6
LDQ64
T (LVDS)*
U4
PL48B
6
LDQ52
C (LVDS)*
PL60B
6
LDQ64
C (LVDS)*
V9
PL49A
6
LDQ52
T
PL61A
6
LDQ64
T
V7
PL49B
6
LDQ52
C
PL61B
6
LDQ64
C
VCCIO
VCCIO6
6
VCCIO6
6
U3
PL50A
6
LDQ52
T (LVDS)*
PL62A
6
LDQ64
T (LVDS)*
U2
PL50B
6
LDQ52
C (LVDS)*
PL62B
6
LDQ64
C (LVDS)*
Differential
V8
PL51A
6
LDQ52
T
PL63A
6
LDQ64
T
U6
PL51B
6
LDQ52
C
PL63B
6
LDQ64
C
GNDIO
GNDIO6
-
GNDIO6
-
U1
PL52A
6
LDQS52
T (LVDS)*
PL64A
6
LDQS64
T (LVDS)*
V2
PL52B
6
LDQ52
C (LVDS)*
PL64B
6
LDQ64
C (LVDS)*
LDQ52
T
LDQ64
T
V5
PL53A
6
VCCIO
VCCIO6
6
V6
PL53B
6
LDQ52
V1
PL54A
6
LDQ52
W1
PL54B
6
LDQ52
C (LVDS)*
PL66B
W5
PL55A
6
LDQ52
T
PL67A
GNDIO
GNDIO6
-
GNDIO6
-
W6
PL55B
6
C
PL67B
6
LDQ64
C
W3
PL57A
6
T (LVDS)*
PL69A
6
LDQ73
T (LVDS)*
W4
PL57B
6
C (LVDS)*
PL69B
6
LDQ73
C (LVDS)*
W2
PL58A
6
T
PL70A
6
LDQ73
T
Y4
PL58B
6
C
PL70B
6
LDQ73
C
T (LVDS)*
PL71A
6
LDQ73
T (LVDS)*
VCCIO6
6
C (LVDS)*
LDQ52
PL65A
6
VCCIO6
6
C
PL65B
6
LDQ64
C
T (LVDS)*
PL66A
6
LDQ64
T (LVDS)*
6
LDQ64
C (LVDS)*
6
LDQ64
T
Y1
PL59A
6
VCCIO
VCCIO6
6
Y2
PL59B
6
C (LVDS)*
PL71B
6
LDQ73
Y5
PL60A
6
T
PL72A
6
LDQ73
T
Y6
PL60B
6
C
PL72B
6
LDQ73
C
LDQS73
T (LVDS)*
C (LVDS)*
AA1
NC
-
PL73A
6
GNDIO
GNDIO6
-
GNDIO6
-
AA2
NC
-
PL73B
6
LDQ73
Y3
NC
-
PL74A
6
LDQ73
T
AB1
NC
-
PL74B
6
LDQ73
C
LDQ73
T (LVDS)*
-
-
-
VCCIO6
6
Y9
NC
-
PL75A
6
4-186
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
Y8
NC
Y7
AA7
LFE2M70E/SE
Ball/Pad
Function
Bank
Dual Function
Differential
-
PL75B
6
LDQ73
C (LVDS)*
NC
-
PL76A
6
LDQ73
T
NC
-
PL76B
6
LDQ73
C
-
-
-
GNDIO6
-
-
-
-
-
-
AB2
NC
-
PL78A
6
LDQ82
T (LVDS)*
AB3
NC
-
PL78B
6
LDQ82
C (LVDS)*
AA5
NC
-
PL79A
6
LDQ82
T
AA6
NC
-
PL79B
6
LDQ82
C
AB4
NC
-
PL80A
6
LDQ82
T (LVDS)*
-
-
-
VCCIO6
6
AB5
NC
-
PL80B
6
LDQ82
C (LVDS)*
AA8
NC
-
PL81A
6
LDQ82
T
AA9
NC
-
PL81B
6
LDQ82
C
PL82A
6
LLM0_GPLLT_IN_A**/LDQS82
T (LVDS)*
GNDIO6
C (LVDS)*
Dual Function
LLM0_GPLLT_IN_A**
Differential
AC1
PL62A
6
GNDIO
GNDIO6
-
T (LVDS)*
AC2
PL62B
6
LLM0_GPLLC_IN_A**
C (LVDS)*
PL82B
6
LLM0_GPLLC_IN_A**/LDQ82
AC4
PL63A
6
LLM0_GPLLT_FB_A
T
PL83A
6
LLM0_GPLLT_FB_A/LDQ82
T
AC3
PL63B
6
LLM0_GPLLC_FB_A
C
PL83B
6
LLM0_GPLLC_FB_A/LDQ82
C
VCCIO
VCCIO6
6
VCCIO6
6
AC7
PL64A
6
LLM0_GDLLT_IN_A**
T (LVDS)*
PL84A
6
LLM0_GDLLT_IN_A**/LDQ82
T (LVDS)*
AC6
PL64B
6
LLM0_GDLLC_IN_A**
C (LVDS)*
PL84B
6
LLM0_GDLLC_IN_A**/LDQ82
C (LVDS)*
AC5
PL65A
6
LLM0_GDLLT_FB_A
T
PL85A
6
LLM0_GDLLT_FB_A/LDQ82
T
AD3
PL65B
6
LLM0_GDLLC_FB_A
C
PL85B
6
LLM0_GDLLC_FB_A/LDQ82
C
GNDIO
GNDIO6
-
GNDIO6
-
AB8
LLM0_PLLCAP
6
LLM0_PLLCAP
6
AD2
PL67A
6
LDQ71
T (LVDS)*
PL87A
6
T
AD1
PL67B
6
LDQ71
C (LVDS)*
PL87B
6
C
AE2
TCK
-
TCK
-
AE1
TDI
-
TDI
-
AF2
TMS
-
TMS
-
AF1
TDO
-
TDO
-
AG1
VCCJ
-
VCCJ
-
LLC_SQ_VCCRX3
14
AH1
VCC
-
AK2
PB11A
5
AJ1
NC
-
AJ2
PB11B
5
AH4
VCC
-
AK5
PB13A
5
AK4
NC
-
AJ5
PB13B
5
AH5
VCC
-
AJ6
PB14B
5
AH6
NC
-
AK6
PB14A
5
AH2
VCC
-
AJ3
PB12B
5
AH3
NC
-
AK3
PB12A
5
BDQ15
BDQ15
BDQ15
BDQ15
BDQ15
BDQ15
BDQ15
BDQ15
T
C
T
C
C
T
C
T
4-187
LLC_SQ_HDINP3
14
LLC_SQ_VCCIB3
14
LLC_SQ_HDINN3
14
LLC_SQ_VCCTX3
14
LLC_SQ_HDOUTP3
14
LLC_SQ_VCCOB3
14
LLC_SQ_HDOUTN3
14
LLC_SQ_VCCTX2
14
LLC_SQ_HDOUTN2
14
LLC_SQ_VCCOB2
14
LLC_SQ_HDOUTP2
14
LLC_SQ_VCCRX2
14
LLC_SQ_HDINN2
14
LLC_SQ_VCCIB2
14
LLC_SQ_HDINP2
14
T
C
T
C
C
T
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AH7
VCC
-
AG7
PB15A
5
BDQS15
AF7
PB15B
5
BDQ15
BDQ15
T
AJ7
VCCAUX
-
AK11
PB18A
5
AH11
NC
-
AJ11
PB18B
5
AH12
VCC
-
AK8
PB16A
5
AH8
NC
-
AJ8
PB16B
5
AH9
VCC
-
AJ9
PB17B
5
AK10
NC
-
AK9
PB17A
5
AH10
VCC
-
AJ12
PB19B
5
AJ13
NC
-
AK12
PB19A
5
AH13
VCC
-
Dual Function
BDQ15
BDQ15
BDQ15
BDQ15
BDQ15
BDQ15
BDQ15
Ball/Pad
Function
Bank
LLC_SQ_VCCP
14
T
LLC_SQ_REFCLKP
14
T
C
LLC_SQ_REFCLKN
14
C
LLC_SQ_VCCAUX33
14
Differential
C
T
C
C
T
C
T
LLC_SQ_HDINP1
14
LLC_SQ_VCCIB1
14
LLC_SQ_HDINN1
14
LLC_SQ_VCCRX1
14
LLC_SQ_HDOUTP1
14
LLC_SQ_VCCOB1
14
LLC_SQ_HDOUTN1
14
LLC_SQ_VCCTX1
14
LLC_SQ_HDOUTN0
14
LLC_SQ_VCCOB0
14
LLC_SQ_HDOUTP0
14
LLC_SQ_VCCTX0
14
LLC_SQ_HDINN0
14
LLC_SQ_VCCIB0
14
LLC_SQ_HDINP0
14
LLC_SQ_VCCRX0
14
Dual Function
Differential
T
C
T
C
C
T
C
T
AF10
PB3A
5
BDQ6
T
PB30A
5
BDQ33
T
AE8
PB3B
5
BDQ6
C
PB30B
5
BDQ33
C
AE11
PB4A
5
BDQ6
T
BDQ33
T
VCCIO
VCCIO5
5
C
PB31A
5
VCCIO5
5
AD9
PB4B
5
BDQ6
C
PB31B
5
BDQ33
AE10
PB5A
5
BDQ6
T
PB32A
5
BDQ33
T
AD10
PB5B
5
BDQ6
C
PB32B
5
BDQ33
C
BDQS6
T
BDQS33
T
C
AE13
PB6A
5
GNDIO
GNDIO5
-
PB33A
5
GNDIO5
-
AC12
PB6B
5
BDQ6
AG2
PB7A
5
BDQ6
C
PB33B
5
BDQ33
T
PB34A
5
BDQ33
AG3
PB7B
5
T
BDQ6
C
PB34B
5
BDQ33
C
BDQ6
T
BDQ33
T
C
AD13
PB8A
5
VCCIO
VCCIO5
5
PB35A
5
VCCIO5
5
AC13
PB8B
5
BDQ6
AE14
PB9A
5
BDQ6
C
PB35B
5
BDQ33
T
PB36A
5
BDQ33
AC14
PB9B
5
T
BDQ6
C
PB36B
5
BDQ33
C
AF3
PB10A
5
GNDIO
GNDIO5
-
BDQ6
T
BDQ33
T
BDQ33
C
BDQ6
C
PB37A
5
GNDIO5
-
PB37B
5
-
-
AF4
PB10B
5
VCCIO
VCCIO5
5
AG4
PB20A
5
BDQ24
T
PB38A
5
BDQ42
T
AG5
PB20B
5
BDQ24
C
PB38B
5
BDQ42
C
GNDIO
GNDIO5
-
-
-
VCCIO
VCCIO5
5
-
-
AD11
PB24A
5
BDQS24****
T
PB39A
5
BDQ42
T
AF13
PB24B
5
BDQ24
C
PB39B
5
BDQ42
C
AF12
PB25A
5
BDQ24
T
PB40A
5
BDQ42
T
-
-
-
VCCIO5
5
4-188
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AD14
PB25B
5
BDQ24
Bank
Dual Function
Differential
C
PB40B
5
BDQ42
AG8
PB26A
5
C
BDQ24
T
PB41A
5
BDQ42
AF8
PB26B
T
5
BDQ24
C
PB41B
5
BDQ42
C
AE15
-
PB27A
5
BDQ24
T
PB42A
5
BDQS42****
T
-
-
GNDIO5
-
VCCIO
VCCIO5
5
AC15
PB27B
5
VCCIO
VCCIO5
5
BDQ42
C
GNDIO
GNDIO5
-
GNDIO5
-
AD15
PB38A
5
BDQ42
T
PB47A
5
BDQ51
T
AF15
PB38B
5
BDQ42
C
PB47B
5
BDQ51
C
BDQ24
C
-
-
PB42B
5
VCCIO5
5
AG10
PB39A
5
BDQ42
T
PB48A
5
BDQ51
T
AG9
PB39B
5
BDQ42
C
PB48B
5
BDQ51
C
AH14
PB40A
5
BDQ42
T
PB49A
5
BDQ51
T
AG12
PB40B
5
BDQ42
C
PB49B
5
BDQ51
C
VCCIO
VCCIO5
5
VCCIO5
5
AG15
PB41A
5
BDQ42
T
PB50A
5
BDQ51
T
AG13
PB41B
5
BDQ42
C
PB50B
5
BDQ51
C
GNDIO
GNDIO5
-
GNDIO5
-
AF16
PB42A
5
BDQS42
T
PB51A
5
BDQS51
T
AH15
PB42B
5
BDQ42
C
PB51B
5
BDQ51
C
AC16
PB43A
5
VREF2_5/BDQ42
T
PB52A
5
VREF2_5/BDQ51
T
AE16
PB43B
5
VREF1_5/BDQ42
C
PB52B
5
VREF1_5/BDQ51
C
AG11
PB44A
5
PCLKT5_0/BDQ42
T
PB53A
5
PCLKT5_0/BDQ51
T
AF11
PB44B
5
PCLKC5_0/BDQ42
C
PB53B
5
PCLKC5_0/BDQ51
C
5
PCLKT4_0/BDQ60
T
C
VCCIO
VCCIO5
5
VCCIO5
GNDIO
GNDIO5
-
GNDIO5
-
AJ14
PB49A
4
PB58A
4
VCCIO
VCCIO4
4
VCCIO4
4
AK14
PB49B
4
PCLKC4_0/BDQ51
C
PB58B
4
PCLKC4_0/BDQ60
AK15
PB50A
4
VREF2_4/BDQ51
T
PB59A
4
VREF2_4/BDQ60
T
AK16
PB50B
4
VREF1_4/BDQ51
C
PB59B
4
VREF1_4/BDQ60
C
AF18
PB51A
4
BDQS51
T
PB60A
4
BDQS60
T
GNDIO
GNDIO4
-
GNDIO4
C
PCLKT4_0/BDQ51
T
AD16
PB51B
4
BDQ51
C
PB60B
4
BDQ60
AJ15
PB52A
4
BDQ51
T
PB61A
4
BDQ60
T
AG16
PB52B
4
BDQ51
C
PB61B
4
BDQ60
C
BDQ51
T
BDQ60
T
C
AE17
PB53A
4
VCCIO
VCCIO4
4
PB62A
4
VCCIO4
4
AC17
PB53B
4
BDQ51
C
PB62B
4
BDQ60
AH16
PB54A
4
BDQ51
T
PB63A
4
BDQ60
T
AK17
PB54B
4
BDQ51
C
PB63B
4
BDQ60
C
BDQ51
T
BDQ60
T
C
AG20
PB55A
4
GNDIO
GNDIO4
-
PB64A
4
GNDIO4
-
AG21
PB55B
4
BDQ51
AG18
PB56A
4
BDQ60
C
PB64B
4
BDQ60
T
PB65A
4
BDQ69
AJ16
PB56B
4
BDQ60
T
C
PB65B
4
BDQ69
C
AF21
PB57A
4
AG22
PB57B
4
BDQ60
T
PB66A
4
BDQ69
T
BDQ60
C
PB66B
4
BDQ69
C
4-189
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
Dual Function
AD17
PB58A
4
BDQ60
AF19
PB58B
4
BDQ60
Differential
Ball/Pad
Function
Bank
Dual Function
T
PB67A
4
BDQ69
T
C
PB67B
4
BDQ69
C
4
Differential
VCCIO
VCCIO4
4
VCCIO4
GNDIO
GNDIO4
-
GNDIO4
-
AH17
PB62A
4
BDQ60
T
PB71A
4
BDQ69
T
AJ17
PB62B
4
BDQ60
C
PB71B
4
BDQ69
C
VCCIO
VCCIO4
4
VCCIO4
4
AF26
PB64A
4
BDQ60
T
PB73A
4
BDQ69
T
AE25
PB64B
4
BDQ60
C
PB73B
4
BDQ69
C
GNDIO
GNDIO4
-
GNDIO4
-
AD24
PB65A
4
BDQ69
T
PB74A
4
BDQ78
T
AE24
PB65B
4
BDQ69
C
PB74B
4
BDQ78
C
AD18
PB66A
4
BDQ69
T
PB75A
4
BDQ78
T
AC18
PB66B
4
BDQ69
C
PB75B
4
BDQ78
C
AE18
PB67A
4
BDQ69
T
PB76A
4
BDQ78
T
AG19
PB67B
4
BDQ69
C
PB76B
4
BDQ78
C
4
VCCIO
VCCIO4
4
VCCIO4
GNDIO
GNDIO4
-
GNDIO4
-
AC19
PB69A
4
BDQS69
T
PB78A
4
BDQS78
T
AD20
PB69B
4
BDQ69
C
PB78B
4
BDQ78
C
AB18
PB70A
4
BDQ69
T
PB79A
4
BDQ78
T
AC20
PB70B
4
BDQ69
C
PB79B
4
BDQ78
C
AE20
PB71A
4
BDQ69
T
PB80A
4
BDQ78
T
AE21
PB71B
4
BDQ69
C
PB80B
4
BDQ78
C
VCCIO
VCCIO4
4
VCCIO4
4
AC23
PB72A
4
BDQ69
T
PB81A
4
BDQ78
T
AD23
PB72B
4
BDQ69
C
PB81B
4
BDQ78
C
GNDIO
GNDIO4
-
GNDIO4
-
AH18
LRC_SQ_VCCRX3
13
LRC_SQ_VCCRX3
13
AK19
LRC_SQ_HDINP3
13
AJ18
LRC_SQ_VCCIB3
13
AJ19
LRC_SQ_HDINN3
13
AH21
LRC_SQ_VCCTX3
13
AK22
LRC_SQ_HDOUTP3
13
AK21
LRC_SQ_VCCOB3
13
AJ22
LRC_SQ_HDOUTN3
13
AH22
LRC_SQ_VCCTX2
13
AJ23
LRC_SQ_HDOUTN2
13
AH23
LRC_SQ_VCCOB2
13
AK23
LRC_SQ_HDOUTP2
13
AH19
LRC_SQ_VCCRX2
13
AJ20
LRC_SQ_HDINN2
13
AH20
LRC_SQ_VCCIB2
13
AK20
LRC_SQ_HDINP2
13
AH24
LRC_SQ_VCCP
13
T
C
T
C
C
T
C
T
LRC_SQ_HDINP3
13
LRC_SQ_VCCIB3
13
LRC_SQ_HDINN3
13
LRC_SQ_VCCTX3
13
LRC_SQ_HDOUTP3
13
LRC_SQ_VCCOB3
13
LRC_SQ_HDOUTN3
13
LRC_SQ_VCCTX2
13
LRC_SQ_HDOUTN2
13
LRC_SQ_VCCOB2
13
LRC_SQ_HDOUTP2
13
LRC_SQ_VCCRX2
13
LRC_SQ_HDINN2
13
LRC_SQ_VCCIB2
13
LRC_SQ_HDINP2
13
LRC_SQ_VCCP
13
T
C
T
C
C
T
C
T
AG24
LRC_SQ_REFCLKP
13
T
LRC_SQ_REFCLKP
13
T
AF24
LRC_SQ_REFCLKN
13
C
LRC_SQ_REFCLKN
13
C
AJ24
LRC_SQ_VCCAUX33
13
LRC_SQ_VCCAUX33
13
AK28
LRC_SQ_HDINP1
13
LRC_SQ_HDINP1
13
T
4-190
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
AH28
LRC_SQ_VCCIB1
13
AJ28
LRC_SQ_HDINN1
13
AH29
LRC_SQ_VCCRX1
13
AK25
LRC_SQ_HDOUTP1
13
AH25
LRC_SQ_VCCOB1
13
AJ25
LRC_SQ_HDOUTN1
13
AH26
LRC_SQ_VCCTX1
13
AJ26
LRC_SQ_HDOUTN0
13
AK27
LRC_SQ_VCCOB0
13
AK26
LRC_SQ_HDOUTP0
13
AH27
LRC_SQ_VCCTX0
13
AJ29
LRC_SQ_HDINN0
13
AJ30
LRC_SQ_VCCIB0
13
AK29
LRC_SQ_HDINP0
13
AH30
LRC_SQ_VCCRX0
13
Dual Function
LFE2M70E/SE
Differential
C
T
C
C
T
C
T
Ball/Pad
Function
Bank
LRC_SQ_VCCIB1
13
LRC_SQ_HDINN1
13
LRC_SQ_VCCRX1
13
LRC_SQ_HDOUTP1
13
LRC_SQ_VCCOB1
13
LRC_SQ_HDOUTN1
13
LRC_SQ_VCCTX1
13
LRC_SQ_HDOUTN0
13
LRC_SQ_VCCOB0
13
LRC_SQ_HDOUTP0
13
LRC_SQ_VCCTX0
13
LRC_SQ_HDINN0
13
LRC_SQ_VCCIB0
13
LRC_SQ_HDINP0
13
LRC_SQ_VCCRX0
13
AG27
CFG2
8
CFG2
8
AD25
CFG1
8
CFG1
8
AG28
CFG0
8
CFG0
8
AG30
PROGRAMN
8
PROGRAMN
8
AG29
CCLK
8
CCLK
8
AC24
INITN
8
INITN
8
AF27
DONE
8
DONE
8
GNDIO
GNDIO8
-
GNDIO8
-
AF28
WRITEN***
8
WRITEN***
8
AE26
CS1N***
8
CS1N***
8
AB23
CSN***
8
CSN***
8
AF29
D0/SPIFASTN***
8
D0/SPIFASTN***
8
VCCIO
VCCIO8
8
VCCIO8
8
AF30
D1***
8
D1***
8
AD26
D2***
8
D2***
8
8
AE29
D3***
8
D3***
GNDIO
GNDIO8
-
GNDIO8
-
AE30
D4***
8
D4***
8
AD29
D5***
8
D5***
8
AC25
D6***
8
D6***
8
AD30
D7***
8
D7***
8
VCCIO
VCCIO8
8
VCCIO8
8
AA22
DI/CSSPI0N***
8
DI/CSSPI0N***
8
AC26
DOUT/CSON/
CSSPI1N***
8
DOUT/CSON/
CSSPI1N***
8
AA23
BUSY/SISPI***
8
BUSY/SISPI***
8
AB22
RLM0_PLLCAP
3
RLM0_PLLCAP
3
AC27
PR65B
3
GNDIO
GNDIO3
-
RLM0_GDLLC_FB_A
AC28
PR65A
3
RLM0_GDLLT_FB_A
AC29
PR64B
3
RLM0_GDLLC_IN_A**
C
Dual Function
Differential
C
T
C
C
T
C
T
PR85B
3
GNDIO3
-
RLM0_GDLLC_FB_A/RDQ82
C
T
PR85A
3
RLM0_GDLLT_FB_A/RDQ82
T
C (LVDS)*
PR84B
3
RLM0_GDLLC_IN_A**/RDQ82
C (LVDS)*
AC30
PR64A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
PR84A
3
RLM0_GDLLT_IN_A**/RDQ82
T (LVDS)*
AB30
PR63B
3
RLM0_GPLLC_IN_A**
C
PR83B
3
RLM0_GPLLC_IN_A**/RDQ82
C
VCCIO
VCCIO3
3
VCCIO3
3
AA30
PR63A
3
PR83A
3
RLM0_GPLLT_IN_A**/RDQ82
T
RLM0_GPLLT_IN_A**
T
4-191
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AB29
PR62B
3
RLM0_GPLLC_FB_A
Bank
Dual Function
Differential
C (LVDS)*
PR82B
3
RLM0_GPLLC_FB_A/RDQ82
AB28
PR62A
3
RLM0_GPLLT_FB_A
C (LVDS)*
T (LVDS)*
PR82A
3
RLM0_GPLLT_FB_A/RDQS82
GNDIO
GNDIO3
-
T (LVDS)*
GNDIO3
-
Y22
PR60B
3
Y23
PR60A
3
C
PR81B
3
RDQ82
C
T
PR81A
3
RDQ82
AB26
NC
-
T
PR80B
3
RDQ82
C (LVDS)*
AB27
NC
-
-
-
PR80A
3
RDQ82
T (LVDS)*
-
VCCIO3
3
Y24
Y25
NC
-
PR79B
3
RDQ82
C
NC
-
PR79A
3
RDQ82
T
AA29
NC
-
PR78B
3
RDQ82
C (LVDS)*
Y28
NC
-
PR78A
3
RDQ82
T (LVDS)*
Y30
NC
-
PR76B
3
RDQ73
C
Y29
NC
-
PR76A
3
RDQ73
T
-
-
-
GNDIO3
-
-
-
-
-
-
W22
NC
-
PR75B
3
RDQ73
C (LVDS)*
V22
NC
-
PR75A
3
RDQ73
T (LVDS)*
Y27
NC
-
PR74B
3
RDQ73
C
-
-
-
VCCIO3
3
Y26
NC
-
PR74A
3
RDQ73
T
W30
NC
-
PR73B
3
RDQ73
C (LVDS)*
W29
NC
-
PR73A
3
RDQS73
T (LVDS)*
-
-
-
GNDIO3
-
W25
NC
-
PR72B
3
RDQ73
C
W26
NC
-
PR72A
3
RDQ73
T
U29
PR59B
3
C (LVDS)*
PR71B
3
RDQ73
C (LVDS)*
T (LVDS)*
RDQ73
T (LVDS)*
C
V29
PR59A
3
VCCIO
VCCIO3
3
PR71A
3
VCCIO3
3
V30
PR58B
3
C
PR70B
3
RDQ73
U30
PR58A
3
T
PR70A
3
RDQ73
T
W27
PR57B
3
C (LVDS)*
PR69B
3
RDQ73
C (LVDS)*
W28
PR57A
3
T (LVDS)*
PR69A
3
RDQ73
T (LVDS)*
V24
PR55B
3
RDQ52
C
PR67B
3
RDQ64
C
V25
PR55A
3
RDQ52
T
PR67A
3
RDQ64
T
GNDIO
GNDIO3
-
GNDIO3
-
U28
PR54B
3
RDQ52
C (LVDS)*
PR66B
3
RDQ64
C (LVDS)*
U27
PR54A
3
RDQ52
T (LVDS)*
PR66A
3
RDQ64
T (LVDS)*
U23
PR53B
3
RDQ52
C
PR65B
3
RDQ64
C
V23
PR53A
3
RDQ52
T
PR65A
3
RDQ64
T
VCCIO
VCCIO3
3
VCCIO3
3
V26
PR52B
3
RDQ52
C (LVDS)*
PR64B
3
RDQ64
C (LVDS)*
U26
PR52A
3
RDQS52
T (LVDS)*
PR64A
3
RDQS64
T (LVDS)*
U25
PR51B
3
RDQ52
C
PR63B
3
RDQ64
C
GNDIO
GNDIO3
-
GNDIO3
-
U24
PR51A
3
RDQ52
T
PR63A
3
RDQ64
T
T30
PR50B
3
RDQ52
C (LVDS)*
PR62B
3
RDQ64
C (LVDS)*
R30
PR50A
3
RDQ52
T (LVDS)*
PR62A
3
RDQ64
T (LVDS)*
T23
PR49B
3
RDQ52
C
PR61B
3
RDQ64
C
4-192
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO3
3
T22
PR49A
3
RDQ52
T29
PR48B
3
RDQ52
Dual Function
Ball/Pad
Function
Bank
VCCIO3
3
T
PR61A
3
RDQ64
T
C (LVDS)*
PR60B
3
RDQ64
C (LVDS)*
Differential
Dual Function
Differential
T28
PR48A
3
RDQ52
T (LVDS)*
PR60A
3
RDQ64
T (LVDS)*
R23
PR46B
3
RLM3_SPLLC_FB_A
C
PR58B
3
RLM3_SPLLC_FB_A/RDQ55
C
GNDIO
GNDIO3
-
GNDIO3
-
VCCIO
VCCIO3
3
-
-
R22
PR46A
3
RLM3_SPLLT_FB_A
T
PR58A
3
RLM3_SPLLT_FB_A/RDQ55
T
P30
PR45B
3
RLM3_SPLLC_IN_A
C (LVDS)*
PR57B
3
RLM3_SPLLC_IN_A/RDQ55
C (LVDS)*
R29
PR45A
3
RLM3_SPLLT_IN_A
T (LVDS)*
PR57A
3
RLM3_SPLLT_IN_A/RDQ55
T (LVDS)*
T27
PR44B
3
C
PR56B
3
RDQ55
C
-
-
-
VCCIO3
3
PR56A
3
RDQ55
T
GNDIO3
-
T26
PR44A
3
GNDIO
GNDIO3
-
T
N30
PR43B
3
C (LVDS)*
PR53B
3
RDQ55
C (LVDS)*
N29
PR43A
3
T (LVDS)*
PR53A
3
RDQ55
T (LVDS)*
VCCIO
VCCIO3
3
VCCIO3
3
R27
PR42B
3
VREF2_3
C
PR52B
3
VREF2_3/RDQ55
C
R28
PR42A
3
VREF1_3
T
PR52A
3
VREF1_3/RDQ55
T
P29
PR41B
3
PCLKC3_0
C (LVDS)*
PR51B
3
PCLKC3_0/RDQ55
C (LVDS)*
P28
PR41A
3
PCLKT3_0
T (LVDS)*
PR51A
3
PCLKT3_0/RDQ55
T (LVDS)*
M30
PR39B
2
PCLKC2_0/RDQ36
C
PR49B
2
PCLKC2_0/RDQ46
C
M29
PR39A
2
PCLKT2_0/RDQ36
T
PR49A
2
PCLKT2_0/RDQ46
T
GNDIO
GNDIO2
-
GNDIO2
-
P23
PR38B
2
RDQ36
C (LVDS)*
PR48B
2
RDQ46
C (LVDS)*
P24
PR38A
2
RDQ36
T (LVDS)*
PR48A
2
RDQ46
T (LVDS)*
R26
PR37B
2
RDQ36
C
PR47B
2
RDQ46
C
P27
PR37A
2
RDQ36
T
PR47A
2
RDQ46
T
VCCIO
VCCIO2
2
VCCIO2
2
P25
PR36B
2
RDQ36
C (LVDS)*
PR46B
2
RDQ46
C (LVDS)*
P26
PR36A
2
RDQS36
T (LVDS)*
PR46A
2
RDQS46
T (LVDS)*
K30
PR35B
2
RDQ36
C
PR45B
2
RDQ46
C
GNDIO
GNDIO2
-
GNDIO2
-
K29
PR35A
2
RDQ36
T
PR45A
2
RDQ46
T
N22
PR34B
2
RDQ36
C (LVDS)*
PR44B
2
RDQ46
C (LVDS)*
P22
PR34A
2
RDQ36
T (LVDS)*
PR44A
2
RDQ46
T (LVDS)*
J30
PR33B
2
RUM3_SPLLC_FB_A/RDQ36
C
PR43B
2
RUM3_SPLLC_FB_A/RDQ46
C
VCCIO
VCCIO2
2
VCCIO2
2
J29
PR33A
2
RUM3_SPLLT_FB_A/RDQ36
T
PR43A
2
RUM3_SPLLT_FB_A/RDQ46
T
N24
PR32B
2
RUM3_SPLLC_IN_A/RDQ36
C (LVDS)*
PR42B
2
RUM3_SPLLC_IN_A/RDQ46
C (LVDS)*
N23
PR32A
2
RUM3_SPLLT_IN_A/RDQ36
T (LVDS)*
PR42A
2
RUM3_SPLLT_IN_A/RDQ46
T (LVDS)*
N25
PR30B
2
RDQ27
C
PR40B
2
RDQ37
C
N26
PR30A
2
RDQ27
T
PR40A
2
RDQ37
T
GNDIO
GNDIO2
-
GNDIO2
-
M27
PR29B
2
RDQ27
C (LVDS)*
PR39B
2
RDQ37
C (LVDS)*
M28
PR29A
2
RDQ27
T (LVDS)*
PR39A
2
RDQ37
T (LVDS)*
H30
PR28B
2
RDQ27
C
PR38B
2
RDQ37
C
G30
PR28A
2
RDQ27
T
PR38A
2
RDQ37
T
VCCIO
VCCIO2
2
VCCIO2
2
4-193
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
M25
PR27B
2
RDQ27
Bank
Dual Function
Differential
C (LVDS)*
PR37B
2
RDQ37
M26
PR27A
2
C (LVDS)*
RDQS27
T (LVDS)*
PR37A
2
RDQS37
L30
PR26B
2
T (LVDS)*
RDQ27
C
PR36B
2
RDQ37
GNDIO
GNDIO2
-
C
GNDIO2
-
L29
PR26A
2
RDQ27
L28
PR25B
2
RDQ27
T
PR36A
2
RDQ37
T
C (LVDS)*
PR35B
2
RDQ37
C (LVDS)*
L27
PR25A
2
RDQ27
T (LVDS)*
PR35A
2
RDQ37
T (LVDS)*
H29
PR24B
2
RDQ27
C
PR34B
2
RDQ37
C
VCCIO
VCCIO2
2
VCCIO2
2
G29
PR24A
2
RDQ27
T
PR34A
2
RDQ37
T
L22
PR23B
2
RDQ27
C (LVDS)*
PR33B
2
RDQ37
C (LVDS)*
RDQ27
T (LVDS)*
PR33A
2
RDQ37
T (LVDS)*
C
PR31B
2
RDQ28
C
GNDIO2
-
PR31A
2
RDQ28
T
-
-
M22
PR23A
2
F30
PR21B
2
GNDIO
GNDIO2
-
F29
PR21A
2
-
-
-
T
-
-
-
-
-
E30
PR20B
2
C (LVDS)*
PR30B
2
RDQ28
C (LVDS)*
E29
PR20A
2
T (LVDS)*
PR30A
2
RDQ28
T (LVDS)*
VCCIO
VCCIO2
2
-
-
L25
PR19B
2
C
PR29B
2
RDQ28
C
L26
PR19A
2
T
PR29A
2
RDQ28
T
-
-
-
VCCIO2
2
H28
PR18B
2
C (LVDS)*
PR28B
2
RDQ28
C (LVDS)*
J28
PR18A
2
T (LVDS)*
PR28A
2
RDQS28
T (LVDS)*
G28
PR16B
2
C
PR27B
2
RDQ28
C
GNDIO
GNDIO2
-
GNDIO2
-
G27
PR16A
2
PR27A
2
RDQ28
T
L24
NC
-
PR26B
2
RDQ28
C (LVDS)*
T
L23
NC
-
PR26A
2
RDQ28
T (LVDS)*
D30
NC
-
PR25B
2
RDQ28
C
-
-
-
VCCIO2
2
D29
NC
-
PR25A
2
RDQ28
T
K24
NC
-
PR24B
2
RDQ28
C (LVDS)*
RDQ28
T (LVDS)*
K25
NC
-
PR24A
2
J27
NC
-
PR22B
2
-
-
-
GNDIO2
-
PR22A
2
T
PR21B
2
C (LVDS)*
K26
NC
-
K23
PR15B
2
C (LVDS)*
C
K22
PR15A
2
T (LVDS)*
PR21A
2
T (LVDS)*
J22
PR14B
2
C
PR20B
2
C
VCCIO
VCCIO2
-
VCCIO2
2
J23
PR14A
2
PR20A
2
-
-
-
GNDIO2
-
T
T
-
-
-
-
-
J26
NC
-
PR17B
2
RDQ15
C (LVDS)*
H26
NC
-
PR17A
2
RDQ15
T (LVDS)*
H27
NC
-
PR16B
2
RDQ15
C
G26
NC
-
PR16A
2
RDQ15
T
4-194
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
-
-
H23
H24
LFE2M70E/SE
Ball/Pad
Function
Bank
-
VCCIO2
2
NC
-
PR15B
NC
-
PR15A
D28
NC
-
-
-
-
Dual Function
Differential
E28
NC
-
G24
PR13B
2
H25
PR13A
2
D27
PR12B
2
GNDIO
GNDIO2
-
E27
PR12A
2
RUM0_SPLLT_FB_A
F26
PR11B
2
RUM0_SPLLC_IN_A
G25
PR11A
2
RUM0_SPLLT_IN_A
T (LVDS)*
F24
PR9B
2
VREF2_2
C
VCCIO
VCCIO2
-
GNDIO
GNDIO2
-
F25
PR9A
2
VCCIO
VCCIO2
2
RUM0_SPLLC_FB_A
VREF1_2
Dual Function
Differential
2
RDQ15
C (LVDS)*
2
RDQS15
T (LVDS)*
PR14B
2
RDQ15
C
GNDIO2
-
PR14A
2
RDQ15
T
C (LVDS)*
PR13B
2
RDQ15
C (LVDS)*
T (LVDS)*
PR13A
2
RDQ15
T (LVDS)*
C
PR12B
2
RUM0_SPLLC_FB_A/RDQ15
C
VCCIO2
2
T
PR12A
2
RUM0_SPLLT_FB_A/RDQ15
T
C (LVDS)*
PR11B
2
RUM0_SPLLC_IN_A/RDQ15
C (LVDS)*
PR11A
2
RUM0_SPLLT_IN_A/RDQ15
T (LVDS)*
PR9B
2
VREF2_2
C
-
-
VREF1_2
T
T
GNDIO2
-
PR9A
2
VCCIO2
2
G23
XRES
-
XRES
1
C30
URC_SQ_VCCRX0
12
URC_SQ_VCCRX0
12
A29
URC_SQ_HDINP0
12
B30
URC_SQ_VCCIB0
12
B29
URC_SQ_HDINN0
12
C27
URC_SQ_VCCTX0
12
A26
URC_SQ_HDOUTP0
12
A27
URC_SQ_VCCOB0
12
B26
URC_SQ_HDOUTN0
12
C26
URC_SQ_VCCTX1
12
B25
URC_SQ_HDOUTN1
12
C25
URC_SQ_VCCOB1
12
A25
URC_SQ_HDOUTP1
12
C29
URC_SQ_VCCRX1
12
B28
URC_SQ_HDINN1
12
C28
URC_SQ_VCCIB1
12
A28
URC_SQ_HDINP1
12
B24
URC_SQ_VCCAUX33
12
T
C
T
C
C
T
C
T
URC_SQ_HDINP0
12
URC_SQ_VCCIB0
12
URC_SQ_HDINN0
12
URC_SQ_VCCTX0
12
URC_SQ_HDOUTP0
12
URC_SQ_VCCOB0
12
URC_SQ_HDOUTN0
12
URC_SQ_VCCTX1
12
URC_SQ_HDOUTN1
12
URC_SQ_VCCOB1
12
URC_SQ_HDOUTP1
12
URC_SQ_VCCRX1
12
URC_SQ_HDINN1
12
URC_SQ_VCCIB1
12
URC_SQ_HDINP1
12
URC_SQ_VCCAUX33
12
T
C
T
C
C
T
C
T
E24
URC_SQ_REFCLKN
12
C
URC_SQ_REFCLKN
12
C
D24
URC_SQ_REFCLKP
12
T
URC_SQ_REFCLKP
12
T
C24
URC_SQ_VCCP
12
URC_SQ_VCCP
12
A20
URC_SQ_HDINP2
12
URC_SQ_HDINP2
12
C20
URC_SQ_VCCIB2
12
URC_SQ_VCCIB2
12
B20
URC_SQ_HDINN2
12
C19
URC_SQ_VCCRX2
12
A23
URC_SQ_HDOUTP2
12
C23
URC_SQ_VCCOB2
12
B23
URC_SQ_HDOUTN2
12
C22
URC_SQ_VCCTX2
12
B22
URC_SQ_HDOUTN3
12
A21
URC_SQ_VCCOB3
12
T
C
T
C
C
4-195
URC_SQ_HDINN2
12
URC_SQ_VCCRX2
12
URC_SQ_HDOUTP2
12
URC_SQ_VCCOB2
12
URC_SQ_HDOUTN2
12
URC_SQ_VCCTX2
12
URC_SQ_HDOUTN3
12
URC_SQ_VCCOB3
12
T
C
T
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
A22
URC_SQ_HDOUTP3
12
C21
URC_SQ_VCCTX3
12
B19
URC_SQ_HDINN3
12
B18
URC_SQ_VCCIB3
12
A19
URC_SQ_HDINP3
12
C18
URC_SQ_VCCRX3
12
D23
PT73B
1
GNDIO
GNDIO1
-
Dual Function
LFE2M70E/SE
Differential
Ball/Pad
Function
Bank
T
URC_SQ_HDOUTP3
12
URC_SQ_VCCTX3
12
C
T
C
URC_SQ_HDINN3
12
URC_SQ_VCCIB3
12
URC_SQ_HDINP3
12
URC_SQ_VCCRX3
12
PT82B
1
GNDIO1
-
Dual Function
Differential
T
C
T
C
E21
PT73A
1
T
PT82A
1
T
D26
PT72B
1
C
PT81B
1
C
E26
PT72A
1
T
PT81A
1
T
E23
PT71B
1
C
PT80B
1
C
-
-
-
G22
PT71A
1
VCCIO
VCCIO1
1
T
VCCIO1
1
PT80A
1
-
-
T
D22
PT70B
1
C
PT79B
1
F21
PT70A
1
T
PT79A
1
C
T
G18
PT69B
1
C
PT78B
1
C
H18
PT69A
1
T
PT78A
1
T
D20
PT68B
1
C
PT77B
1
C
GNDIO
GNDIO1
-
GNDIO1
-
D21
PT68A
1
T
PT77A
1
T
E20
PT67B
1
C
PT76B
1
C
E19
PT67A
1
T
PT76A
1
T
D19
PT66B
1
C
PT75B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
E18
PT66A
1
T
PT75A
1
T
D18
PT65B
1
C
PT74B
1
C
C17
PT65A
1
T
PT74A
1
T
A17
PT64B
1
C
PT73B
1
C
T
T
B17
PT64A
1
PT73A
1
GNDIO
GNDIO1
-
GNDIO1
-
VCCIO
VCCIO1
1
VCCIO1
1
J18
NC
-
PT66B
1
J19
NC
-
PT66A
1
T
H17
NC
-
PT65B
1
C
C
J17
NC
-
PT65A
1
T
F18
NC
-
PT64B
1
C
F17
NC
-
PT64A
1
T
-
-
-
GNDIO1
-
A16
PT54B
1
C
PT63B
1
B16
PT54A
1
T
PT63A
1
T
G17
PT53B
1
C
PT62B
1
C
G16
PT53A
1
T
PT62A
1
T
VCCIO
VCCIO1
1
VCCIO1
1
C
H16
PT52B
1
C
PT61B
1
F16
PT52A
1
T
PT61A
1
T
J16
PT51B
1
C
PT60B
1
C
G15
PT51A
1
T
PT60A
1
T
4-196
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
GNDIO
GNDIO1
-
C16
PT50B
1
D16
PT50A
1
J15
PT49B
LFE2M70E/SE
Ball/Pad
Function
Bank
GNDIO1
-
C
PT59B
1
T
PT59A
1
T
1
C
PT58B
1
C
T
PT58A
1
T
VCCIO1
1
Dual Function
Differential
Dual Function
Differential
C
H15
PT49A
1
VCCIO
VCCIO1
1
A15
PT48B
1
VREF2_1
C
PT57B
1
VREF2_1
B15
PT48A
1
VREF1_1
T
PT57A
1
VREF1_1
T
F15
PT47B
1
PCLKC1_0
C
PT56B
1
PCLKC1_0
C
C
E16
PT47A
1
PCLKT1_0
T
PT56A
1
PCLKT1_0
T
C15
PT46B
0
PCLKC0_0
C
PT55B
0
PCLKC0_0
C
GNDIO
GNDIO0
-
GNDIO0
-
D15
PT46A
0
PCLKT0_0
T
PT55A
0
PCLKT0_0
T
C14
PT45B
0
VREF2_0
C
PT54B
0
VREF2_0
C
VREF1_0
VREF1_0
E15
PT45A
0
G14
PT44B
0
T
PT54A
0
C
PT53B
0
T
VCCIO
VCCIO0
0
VCCIO0
0
J14
PT44A
0
T
PT53A
0
T
F14
PT43B
0
C
PT52B
0
C
C
H14
PT43A
0
T
PT52A
0
T
A14
PT42B
0
C
PT51B
0
C
B14
PT42A
0
T
PT51A
0
T
D13
PT41B
0
C
PT50B
0
C
GNDIO
GNDIO0
-
GNDIO0
-
F13
PT41A
0
T
PT50A
0
T
G13
PT40B
0
C
PT49B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
J11
PT40A
0
T
PT49A
0
T
D4
PT38B
0
C
PT47B
0
C
D5
PT38A
0
T
PT47A
0
T
E5
PT37B
0
C
PT46B
0
C
T
PT46A
0
T
GNDIO0
-
F6
PT37A
0
GNDIO
GNDIO0
-
VCCIO
VCCIO0
0
VCCIO0
0
F7
PT34B
0
C
PT43B
0
C
D8
PT34A
0
T
PT43A
0
T
GNDIO
GNDIO0
-
GNDIO0
-
J13
PT32B
0
C
PT41B
0
G11
PT32A
0
T
PT41A
0
C
T
H13
PT31B
0
C
PT40B
0
C
H12
PT31A
0
T
PT40A
0
T
VCCIO
VCCIO0
0
VCCIO0
0
E8
PT30B
0
C
PT39B
0
D9
PT30A
0
T
PT39A
0
T
D12
PT28B
0
C
PT37B
0
C
GNDIO
GNDIO0
-
E13
PT28A
0
VCCIO
VCCIO0
GNDIO
GNDIO0
GNDIO0
-
PT37A
0
0
VCCIO0
0
-
GNDIO0
-
T
4-197
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
J12
PT5B
0
GNDIO
GNDIO0
-
VCCIO
VCCIO0
0
VCCIO0
0
H10
PT5A
0
T
PT31A
0
T
E12
PT4B
0
C
PT30B
0
C
D11
PT4A
0
T
PT30A
0
T
H11
PT3B
0
C
PT29B
0
C
T
T
F11
PT3A
0
C13
VCC
-
A12
PT19A
0
B13
NC
-
B12
PT19B
0
C10
VCC
-
A9
PT17A
0
A10
NC
-
B9
PT17B
0
C9
VCC
-
B8
PT18B
0
C8
NC
-
A8
PT18A
0
C12
VCC
-
B11
PT16B
0
C11
NC
-
A11
PT16A
0
B7
VCCAUX
-
Dual Function
Differential
Ball/Pad
Function
Bank
C
PT31B
0
-
-
T
C
T
C
C
T
C
T
PT29A
0
ULC_SQ_VCCRX0
11
ULC_SQ_HDINP0
11
ULC_SQ_VCCIB0
11
ULC_SQ_HDINN0
11
ULC_SQ_VCCTX0
11
ULC_SQ_HDOUTP0
11
ULC_SQ_VCCOB0
11
ULC_SQ_HDOUTN0
11
ULC_SQ_VCCTX1
11
ULC_SQ_HDOUTN1
11
ULC_SQ_VCCOB1
11
ULC_SQ_HDOUTP1
11
ULC_SQ_VCCRX1
11
ULC_SQ_HDINN1
11
ULC_SQ_VCCIB1
11
ULC_SQ_HDINP1
11
ULC_SQ_VCCAUX33
11
Dual Function
Differential
C
T
C
T
C
C
T
C
T
E7
PT15B
0
C
ULC_SQ_REFCLKN
11
C
D7
PT15A
0
T
ULC_SQ_REFCLKP
11
T
C7
VCC
-
ULC_SQ_VCCP
11
A3
PT12A
0
C3
NC
-
B3
PT12B
0
C2
VCC
-
A6
PT14A
0
C6
NC
-
B6
PT14B
0
C5
VCC
-
B5
PT13B
0
A4
NC
-
A5
PT13A
0
C4
VCC
-
B2
PT11B
0
B1
NC
-
T
C
T
C
C
T
C
T
ULC_SQ_HDINP2
11
ULC_SQ_VCCIB2
11
ULC_SQ_HDINN2
11
ULC_SQ_VCCRX2
11
ULC_SQ_HDOUTP2
11
ULC_SQ_VCCOB2
11
ULC_SQ_HDOUTN2
11
ULC_SQ_VCCTX2
11
ULC_SQ_HDOUTN3
11
ULC_SQ_VCCOB3
11
ULC_SQ_HDOUTP3
11
ULC_SQ_VCCTX3
11
ULC_SQ_HDINN3
11
ULC_SQ_VCCIB3
11
A2
PT11A
0
ULC_SQ_HDINP3
11
C1
VCC
-
ULC_SQ_VCCRX3
11
L12
VCC
-
VCC
-
L13
VCC
-
VCC
-
L18
VCC
-
VCC
-
L19
VCC
-
VCC
-
M11
VCC
-
VCC
-
4-198
T
C
T
C
C
T
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
M12
VCC
M13
M14
LFE2M70E/SE
Ball/Pad
Function
Bank
-
VCC
-
VCC
-
VCC
-
VCC
-
VCC
-
M15
VCC
-
VCC
-
M16
VCC
-
VCC
-
M17
VCC
-
VCC
-
M18
VCC
-
VCC
-
M19
VCC
-
VCC
-
M20
VCC
-
VCC
-
N11
VCC
-
VCC
-
N12
VCC
-
VCC
-
N19
VCC
-
VCC
-
N20
VCC
-
VCC
-
P12
VCC
-
VCC
-
Dual Function
Differential
P19
VCC
-
VCC
-
R12
VCC
-
VCC
-
R19
VCC
-
VCC
-
T12
VCC
-
VCC
-
T19
VCC
-
VCC
-
U12
VCC
-
VCC
-
U19
VCC
-
VCC
-
V11
VCC
-
VCC
-
V12
VCC
-
VCC
-
V19
VCC
-
VCC
-
V20
VCC
-
VCC
-
W11
VCC
-
VCC
-
W12
VCC
-
VCC
-
W13
VCC
-
VCC
-
W14
VCC
-
VCC
-
W15
VCC
-
VCC
-
W16
VCC
-
VCC
-
W17
VCC
-
VCC
-
W18
VCC
-
VCC
-
W19
VCC
-
VCC
-
W20
VCC
-
VCC
-
Y12
VCC
-
VCC
-
Y13
VCC
-
VCC
-
Y18
VCC
-
VCC
-
Y19
VCC
-
VCC
-
D14
VCCIO0
0
VCCIO0
0
E6
VCCIO0
0
VCCIO0
0
E9
VCCIO0
0
VCCIO0
0
F12
VCCIO0
0
VCCIO0
0
K12
VCCIO0
0
VCCIO0
0
K13
VCCIO0
0
VCCIO0
0
D17
VCCIO1
1
VCCIO1
1
E22
VCCIO1
1
VCCIO1
1
E25
VCCIO1
1
VCCIO1
1
F19
VCCIO1
1
VCCIO1
1
4-199
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
K18
VCCIO1
K19
F28
LFE2M70E/SE
Ball/Pad
Function
Bank
1
VCCIO1
1
VCCIO1
1
VCCIO1
1
VCCIO2
2
VCCIO2
2
J25
VCCIO2
2
VCCIO2
2
Dual Function
Differential
K28
VCCIO2
2
VCCIO2
2
M21
VCCIO2
2
VCCIO2
2
M24
VCCIO2
2
VCCIO2
2
N21
VCCIO2
2
VCCIO2
2
N28
VCCIO2
2
VCCIO2
2
P21
VCCIO2
2
VCCIO2
2
R25
VCCIO2
2
VCCIO2
2
AA28
VCCIO3
3
VCCIO3
3
AB25
VCCIO3
3
VCCIO3
3
AE28
VCCIO3
3
VCCIO3
3
T25
VCCIO3
3
VCCIO3
3
U21
VCCIO3
3
VCCIO3
3
V21
VCCIO3
3
VCCIO3
3
V28
VCCIO3
3
VCCIO3
3
W21
VCCIO3
3
VCCIO3
3
W24
VCCIO3
3
VCCIO3
3
AA18
VCCIO4
4
VCCIO4
4
AA19
VCCIO4
4
VCCIO4
4
AE19
VCCIO4
4
VCCIO4
4
AF22
VCCIO4
4
VCCIO4
4
AG17
VCCIO4
4
VCCIO4
4
AG25
VCCIO4
4
VCCIO4
4
AA12
VCCIO5
5
VCCIO5
5
AA13
VCCIO5
5
VCCIO5
5
AE12
VCCIO5
5
VCCIO5
5
AF9
VCCIO5
5
VCCIO5
5
AG14
VCCIO5
5
VCCIO5
5
AG6
VCCIO5
5
VCCIO5
5
AA3
VCCIO6
6
VCCIO6
6
AB6
VCCIO6
6
VCCIO6
6
AE3
VCCIO6
6
VCCIO6
6
T6
VCCIO6
6
VCCIO6
6
U10
VCCIO6
6
VCCIO6
6
V10
VCCIO6
6
VCCIO6
6
V3
VCCIO6
6
VCCIO6
6
W10
VCCIO6
6
VCCIO6
6
W7
VCCIO6
6
VCCIO6
6
F3
VCCIO7
7
VCCIO7
7
J6
VCCIO7
7
VCCIO7
7
7
K3
VCCIO7
7
VCCIO7
M10
VCCIO7
7
VCCIO7
7
M7
VCCIO7
7
VCCIO7
7
N10
VCCIO7
7
VCCIO7
7
N3
VCCIO7
7
VCCIO7
7
P10
VCCIO7
7
VCCIO7
7
4-200
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
R6
VCCIO7
LFE2M70E/SE
Ball/Pad
Function
Bank
7
VCCIO7
7
Dual Function
Differential
AA25
VCCIO8
8
VCCIO8
8
AD28
VCCIO8
8
VCCIO8
8
AA10
VCCAUX
-
VCCAUX
-
AA11
VCCAUX
-
VCCAUX
-
AA20
VCCAUX
-
VCCAUX
-
AA21
VCCAUX
-
VCCAUX
-
K10
VCCAUX
-
VCCAUX
-
K11
VCCAUX
-
VCCAUX
-
K20
VCCAUX
-
VCCAUX
-
K21
VCCAUX
-
VCCAUX
-
L10
VCCAUX
-
VCCAUX
-
L11
VCCAUX
-
VCCAUX
-
L20
VCCAUX
-
VCCAUX
-
L21
VCCAUX
-
VCCAUX
-
Y10
VCCAUX
-
VCCAUX
-
Y11
VCCAUX
-
VCCAUX
-
Y20
VCCAUX
-
VCCAUX
-
Y21
VCCAUX
-
VCCAUX
-
A1
GND
-
GND
-
A13
GND
-
GND
-
A18
GND
-
GND
-
A24
GND
-
GND
-
A30
GND
-
GND
-
A7
GND
-
GND
-
AA14
GND
-
GND
-
AA15
GND
-
GND
-
AA16
GND
-
GND
-
AA17
GND
-
GND
-
AA24
GND
-
GND
-
AA27
GND
-
GND
-
AA4
GND
-
GND
-
AB24
GND
-
GND
-
AB7
GND
-
GND
-
AD12
GND
-
GND
-
AD19
GND
-
GND
-
AD27
GND
-
GND
-
AE22
GND
-
GND
-
AE27
GND
-
GND
-
AE4
GND
-
GND
-
AE9
GND
-
GND
-
AF14
GND
-
GND
-
AF17
GND
-
GND
-
AF25
GND
-
GND
-
AF6
GND
-
GND
-
AJ10
GND
-
GND
-
AJ21
GND
-
GND
-
AJ27
GND
-
GND
-
AJ4
GND
-
GND
-
4-201
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
AK1
GND
AK13
AK18
LFE2M70E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
AK24
GND
-
GND
-
AK30
GND
-
GND
-
AK7
GND
-
GND
-
B10
GND
-
GND
-
B21
GND
-
GND
-
B27
GND
-
GND
-
B4
GND
-
GND
-
D25
GND
-
GND
-
D6
GND
-
GND
-
E14
GND
-
GND
-
E17
GND
-
GND
-
F22
GND
-
GND
-
F27
GND
-
GND
-
F4
GND
-
GND
-
F9
GND
-
GND
-
G12
GND
-
GND
-
G19
GND
-
GND
-
J24
GND
-
GND
-
Dual Function
Differential
J7
GND
-
GND
-
K14
GND
-
GND
-
K15
GND
-
GND
-
K16
GND
-
GND
-
K17
GND
-
GND
-
K27
GND
-
GND
-
K4
GND
-
GND
-
L14
GND
-
GND
-
L15
GND
-
GND
-
L16
GND
-
GND
-
L17
GND
-
GND
-
M23
GND
-
GND
-
M8
GND
-
GND
-
N14
GND
-
GND
-
N15
GND
-
GND
-
N16
GND
-
GND
-
N17
GND
-
GND
-
N27
GND
-
GND
-
N4
GND
-
GND
-
P11
GND
-
GND
-
P13
GND
-
GND
-
P14
GND
-
GND
-
P15
GND
-
GND
-
P16
GND
-
GND
-
P17
GND
-
GND
-
P18
GND
-
GND
-
P20
GND
-
GND
-
R10
GND
-
GND
-
4-202
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
R11
GND
R13
R14
LFE2M70E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
R15
GND
-
GND
-
R16
GND
-
GND
-
R17
GND
-
GND
-
R18
GND
-
GND
-
R20
GND
-
GND
-
R21
GND
-
GND
-
R24
GND
-
GND
-
R7
GND
-
GND
-
T10
GND
-
GND
-
T11
GND
-
GND
-
T13
GND
-
GND
-
T14
GND
-
GND
-
T15
GND
-
GND
-
T16
GND
-
GND
-
T17
GND
-
GND
-
T18
GND
-
GND
-
T20
GND
-
GND
-
T21
GND
-
GND
-
T24
GND
-
GND
-
T7
GND
-
GND
-
U11
GND
-
GND
-
U13
GND
-
GND
-
U14
GND
-
GND
-
U15
GND
-
GND
-
U16
GND
-
GND
-
U17
GND
-
GND
-
U18
GND
-
GND
-
U20
GND
-
GND
-
V14
GND
-
GND
-
V15
GND
-
GND
-
V16
GND
-
GND
-
V17
GND
-
GND
-
V27
GND
-
GND
-
V4
GND
-
GND
-
W23
GND
-
GND
-
W8
GND
-
GND
-
Y14
GND
-
GND
-
Y15
GND
-
GND
-
Y16
GND
-
GND
-
Y17
GND
-
GND
-
AA26
NC
-
NC
-
AB10
PL73B
6
NC
-
AB11
NC
-
NC
-
AB12
NC
-
NC
-
AB13
NC
-
NC
-
AB14
NC
-
NC
-
Dual Function
LDQ71
Differential
C (LVDS)*
4-203
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
Ball
Number
Ball/Pad
Function
Bank
AB15
NC
AB16
AB17
LFE2M70E/SE
Ball/Pad
Function
Bank
-
NC
-
NC
-
NC
-
NC
-
NC
-
AB19
NC
-
NC
-
AB20
NC
-
NC
-
AB21
NC
-
NC
-
AB9
PL73A
6
LDQ71
T (LVDS)*
NC
-
AC10
PL74B
6
LDQ71
C
NC
-
AC11
NC
-
NC
-
AC21
NC
-
NC
-
AC22
NC
-
NC
-
AC8
PL70B
6
LDQ71
C
NC
-
AC9
PL74A
6
LDQ71
T
NC
-
AD21
NC
-
NC
-
NC
-
Dual Function
Differential
AD22
NC
-
AD4
PL68A
6
LDQ71
T
NC
-
AD5
PL68B
6
LDQ71
C
NC
-
AD6
PL71A
6
LDQS71
T (LVDS)*
NC
-
AD7
PL72A
6
LDQ71
T
NC
-
LDQ71
C
AD8
PL72B
6
AE23
NC
-
AE5
PL69A
6
LDQ71
T (LVDS)*
NC
-
AE6
PL70A
6
LDQ71
T
NC
-
AE7
PL71B
6
LDQ71
C (LVDS)*
AF20
NC
-
AF23
NC
-
AF5
PL69B
6
AG23
NC
-
LDQ71
C (LVDS)*
NC
-
NC
-
NC
-
NC
-
NC
-
NC
-
NC
-
AG26
NC
-
NC
-
D10
PT10A
0
T
NC
-
E10
PT9B
0
C
NC
-
E11
PT10B
0
C
NC
-
F10
PT9A
0
T
NC
-
F20
NC
-
NC
-
F23
NC
-
NC
-
F8
PL6B
7
G10
NC
G20
G21
LDQ6
C (LVDS)*
NC
-
-
NC
-
NC
-
NC
-
NC
-
NC
-
G7
PL8A
7
LDQ6
T (LVDS)*
NC
-
G8
PL6A
7
LDQS6****
T (LVDS)*
NC
-
G9
PL5A
7
LDQ6
T
NC
-
H19
NC
-
NC
-
H20
NC
-
NC
-
H21
NC
-
NC
-
H22
NC
-
NC
-
H6
PL8B
7
LDQ6
C (LVDS)*
NC
-
H8
PL5B
7
LDQ6
C
NC
-
H9
PL2A
7
LDQ6
T (LVDS)*
NC
-
4-204
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M50E/SE and LFE2M70E/SE Logic Signal Connections: 900 fpBGA
LFE2M50E/SE
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
J10
PL2B
7
LDQ6
Bank
C (LVDS)*
NC
-
J20
NC
J21
NC
-
NC
-
-
NC
J9
PL4A
7
LDQ6
-
T (LVDS)*
NC
K9
PL4B
7
LDQ6
-
C (LVDS)*
NC
R9
NC
-
-
NC
-
U22
W9
NC
-
NC
-
NC
-
NC
-
N13
VCCPLL
-
VCCPLL
-
N18
VCCPLL
-
VCCPLL
-
V13
VCCPLL
-
VCCPLL
-
V18
VCCPLL
-
VCCPLL
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
*** These sysCONFIG pins are dedicated I/O pins for configuration. The outpus are actively driven during normal device operation.
****Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one connection with a package ball or pin.
4-205
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
VCCIO
VCCIO7
7
Dual Function
Differential
D2
PL9A
7
VREF2_7
T
D3
PL9B
7
VREF1_7
C
GNDIO
GNDIO7
-
J8
PL11A
7
LUM0_SPLLT_IN_A/LDQ15
T (LVDS)*
H7
PL11B
7
LUM0_SPLLC_IN_A/LDQ15
C (LVDS)*
E3
PL12A
7
LUM0_SPLLT_FB_A/LDQ15
T
E4
PL12B
7
LUM0_SPLLC_FB_A/LDQ15
C
-
-
-
VCCIO
VCCIO7
7
G6
PL13A
7
LDQ15
T (LVDS)*
F5
PL13B
7
LDQ15
C (LVDS)*
E2
PL14A
7
LDQ15
T
LDQ15
C
D1
PL14B
7
GNDIO
GNDIO7
-
G5
PL15A
7
LDQS15
T (LVDS)*
G4
PL15B
7
LDQ15
C (LVDS)*
LDQ15
T
K7
PL16A
7
VCCIO
VCCIO7
7
K8
PL16B
7
LDQ15
C
E1
PL17A
7
LDQ15
T (LVDS)*
F2
PL17B
7
LDQ15
C (LVDS)*
F1
PL18A
7
LDQ15
T
GNDIO
GNDIO7
-
G3
PL18B
7
LDQ15
C
GNDIO
GNDIO7
-
VCCIO
VCCIO7
7
H5
PL25A
7
LDQ23
T (LVDS)*
H4
PL25B
7
LDQ23
C (LVDS)*
J5
PL26A
7
LDQ23
T
J4
PL26B
7
LDQ23
C
GNDIO
GNDIO7
-
G2
PL28A
7
LDQ32
T (LVDS)*
G1
PL28B
7
LDQ32
C (LVDS)*
L9
PL29A
7
LDQ32
T
LDQ32
C
L7
PL29B
7
VCCIO
VCCIO7
7
K6
PL30A
7
LDQ32
T (LVDS)*
K5
PL30B
7
LDQ32
C (LVDS)*
L8
PL31A
7
LDQ32
T
L6
PL31B
7
LDQ32
C
GNDIO
GNDIO7
-
4-206
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
H3
PL32A
7
LDQS32
T (LVDS)*
H2
PL32B
7
LDQ32
C (LVDS)*
N8
PL33A
7
LDQ32
T
VCCIO
VCCIO7
7
M9
PL33B
7
LDQ32
C
J3
PL34A
7
LDQ32
T (LVDS)*
-
-
-
J2
PL34B
7
LDQ32
C (LVDS)*
H1
PL35A
7
LDQ32
T
GNDIO
GNDIO7
LDQ32
C
J1
PL35B
7
VCCIO
VCCIO7
7
GNDIO
GNDIO7
-
L5
PL41A
7
LDQ45
T (LVDS)*
L4
PL41B
7
LDQ45
C (LVDS)*
N9
PL42A
7
LDQ45
T
LDQ45
C
N7
PL42B
7
VCCIO
VCCIO7
7
K2
PL43A
7
LDQ45
T (LVDS)*
K1
PL43B
7
LDQ45
C (LVDS)*
P9
PL44A
7
LDQ45
T
P7
PL44B
7
LDQ45
C
GNDIO
GNDIO7
-
M6
PL45A
7
LDQS45
T (LVDS)*
M5
PL45B
7
LDQ45
C (LVDS)*
N5
PL46A
7
LDQ45
T
VCCIO
VCCIO7
7
N6
PL46B
7
LDQ45
C
M4
PL47A
7
LDQ45
T (LVDS)*
M3
PL47B
7
LDQ45
C (LVDS)*
LDQ45
T
P6
PL48A
7
GNDIO
GNDIO7
-
P8
PL48B
7
LDQ45
C
L3
PL50A
7
LUM3_SPLLT_IN_A/LDQ54
T (LVDS)*
L2
PL50B
7
LUM3_SPLLC_IN_A/LDQ54
C (LVDS)*
P5
PL51A
7
LUM3_SPLLT_FB_A/LDQ54
T
LUM3_SPLLC_FB_A/LDQ54
C
P4
PL51B
7
VCCIO
VCCIO7
7
L1
PL52A
7
LDQ54
T (LVDS)*
M2
PL52B
7
LDQ54
C (LVDS)*
R5
PL53A
7
LDQ54
T
R4
PL53B
7
LDQ54
C
GNDIO
GNDIO7
-
4-207
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
M1
PL54A
7
LDQS54
T (LVDS)*
N2
PL54B
7
LDQ54
C (LVDS)*
R8
PL55A
7
LDQ54
T
VCCIO
VCCIO7
7
T9
PL55B
7
LDQ54
C
P3
PL56A
7
LDQ54
T (LVDS)*
P2
PL56B
7
LDQ54
C (LVDS)*
N1
PL57A
7
PCLKT7_0/LDQ54
T
GNDIO
GNDIO7
-
P1
PL57B
7
PCLKC7_0/LDQ54
C
T5
PL59A
6
PCLKT6_0/LDQ63
T (LVDS)*
T4
PL59B
6
PCLKC6_0/LDQ63
C (LVDS)*
U7
PL60A
6
VREF2_6/LDQ63
T
T8
PL60B
6
VREF1_6/LDQ63
C
LDQ63
T (LVDS)*
R3
PL61A
6
VCCIO
VCCIO6
6
R2
PL61B
6
LDQ63
C (LVDS)*
R1
PL62A
6
LDQ63
T
LDQ63
C
LLM4_SPLLT_IN_A/LDQ63
T (LVDS)*
T1
PL62B
6
GNDIO
GNDIO6
-
VCCIO
VCCIO6
6
T3
PL65A
6
T2
PL65B
6
LLM4_SPLLC_IN_A/LDQ63
C (LVDS)*
U9
PL66A
6
LLM4_SPLLT_FB_A/LDQ63
T
LLM4_SPLLC_FB_A/LDQ63
C
U8
PL66B
6
GNDIO
GNDIO6
-
U5
PL68A
6
LDQ72
T (LVDS)*
U4
PL68B
6
LDQ72
C (LVDS)*
V9
PL69A
6
LDQ72
T
V7
PL69B
6
LDQ72
C
VCCIO
VCCIO6
6
U3
PL70A
6
LDQ72
T (LVDS)*
U2
PL70B
6
LDQ72
C (LVDS)*
V8
PL71A
6
LDQ72
T
U6
PL71B
6
LDQ72
C
GNDIO
GNDIO6
-
U1
PL72A
6
LDQS72
T (LVDS)*
V2
PL72B
6
LDQ72
C (LVDS)*
LDQ72
T
V5
PL73A
6
VCCIO
VCCIO6
6
V6
PL73B
6
LDQ72
C
V1
PL74A
6
LDQ72
T (LVDS)*
W1
PL74B
6
LDQ72
C (LVDS)*
4-208
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
LDQ72
T
W5
PL75A
6
GNDIO
GNDIO6
-
W6
PL75B
6
LDQ72
C
W3
PL77A
6
LDQ81
T (LVDS)*
W4
PL77B
6
LDQ81
C (LVDS)*
W2
PL78A
6
LDQ81
T
Y4
PL78B
6
LDQ81
C
Y1
PL79A
6
LDQ81
T (LVDS)*
VCCIO
VCCIO6
6
Y2
PL79B
6
LDQ81
C (LVDS)*
Y5
PL80A
6
LDQ81
T
Y6
PL80B
6
LDQ81
C
AA1
PL81A
6
LDQS81
T (LVDS)*
GNDIO
GNDIO6
-
AA2
PL81B
6
LDQ81
C (LVDS)*
Y3
PL82A
6
LDQ81
T
LDQ81
C
AB1
PL82B
6
VCCIO
VCCIO6
6
Y9
PL83A
6
LDQ81
T (LVDS)*
Y8
PL83B
6
LDQ81
C (LVDS)*
Y7
PL84A
6
LDQ81
T
AA7
PL84B
6
LDQ81
C
GNDIO
GNDIO6
-
VCCIO
VCCIO6
6
AB2
PL95A
6
LDQ99
T (LVDS)*
AB3
PL95B
6
LDQ99
C (LVDS)*
AA5
PL96A
6
LDQ99
T
AA6
PL96B
6
LDQ99
C
LDQ99
T (LVDS)*
AB4
PL97A
6
VCCIO
VCCIO6
6
AB5
PL97B
6
LDQ99
C (LVDS)*
AA8
PL98A
6
LDQ99
T
AA9
PL98B
6
LDQ99
C
AC1
PL99A
6
LLM0_GPLLT_IN_A**/LDQS99
T (LVDS)*
GNDIO
GNDIO6
-
AC2
PL99B
6
LLM0_GPLLC_IN_A**/LDQ99
C (LVDS)*
AC4
PL100A
6
LLM0_GPLLT_FB_A/LDQ99
T
AC3
PL100B
6
LLM0_GPLLC_FB_A/LDQ99
C
VCCIO
VCCIO6
6
AC7
PL101A
6
LLM0_GDLLT_IN_A**/LDQ99
T (LVDS)*
AC6
PL101B
6
LLM0_GDLLC_IN_A**/LDQ99
C (LVDS)*
AC5
PL102A
6
LLM0_GDLLT_FB_A/LDQ99
T
AD3
PL102B
6
LLM0_GDLLC_FB_A/LDQ99
C
4-209
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
GNDIO
GNDIO6
-
AB8
LLM0_PLLCAP
6
AD2
PL104A
6
T
AD1
PL104B
6
C
AE2
TCK
-
AE1
TDI
-
AF2
TMS
-
AF1
TDO
-
AG1
VCCJ
-
AH1
LLC_SQ_VCCRX3
14
AK2
LLC_SQ_HDINP3
14
AJ1
LLC_SQ_VCCIB3
14
AJ2
LLC_SQ_HDINN3
14
AH4
LLC_SQ_VCCTX3
14
AK5
LLC_SQ_HDOUTP3
14
AK4
LLC_SQ_VCCOB3
14
AJ5
LLC_SQ_HDOUTN3
14
AH5
LLC_SQ_VCCTX2
14
AJ6
LLC_SQ_HDOUTN2
14
AH6
LLC_SQ_VCCOB2
14
AK6
LLC_SQ_HDOUTP2
14
AH2
LLC_SQ_VCCRX2
14
T
C
T
C
C
T
AJ3
LLC_SQ_HDINN2
14
AH3
LLC_SQ_VCCIB2
14
AK3
LLC_SQ_HDINP2
14
AH7
LLC_SQ_VCCP
14
AG7
LLC_SQ_REFCLKP
14
T
AF7
LLC_SQ_REFCLKN
14
C
AJ7
LLC_SQ_VCCAUX33
14
AK11
LLC_SQ_HDINP1
14
AH11
LLC_SQ_VCCIB1
14
AJ11
LLC_SQ_HDINN1
14
AH12
LLC_SQ_VCCRX1
14
AK8
LLC_SQ_HDOUTP1
14
AH8
LLC_SQ_VCCOB1
14
AJ8
LLC_SQ_HDOUTN1
14
AH9
LLC_SQ_VCCTX1
14
AJ9
LLC_SQ_HDOUTN0
14
AK10
LLC_SQ_VCCOB0
14
AK9
LLC_SQ_HDOUTP0
14
AH10
LLC_SQ_VCCTX0
14
AJ12
LLC_SQ_HDINN0
14
AJ13
LLC_SQ_VCCIB0
14
4-210
C
T
T
C
T
C
C
T
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
AK12
LLC_SQ_HDINP0
14
AH13
LLC_SQ_VCCRX0
14
Dual Function
Differential
T
AF10
PB30A
5
BDQ33
T
AE8
PB30B
5
BDQ33
C
AE11
PB31A
5
BDQ33
T
VCCIO
VCCIO5
5
AD9
PB31B
5
BDQ33
C
AE10
PB32A
5
BDQ33
T
AD10
PB32B
5
BDQ33
C
AE13
PB33A
5
BDQS33
T
GNDIO
GNDIO5
-
AC12
PB33B
5
BDQ33
C
AG2
PB34A
5
BDQ33
T
AG3
PB34B
5
BDQ33
C
AD13
PB35A
5
BDQ33
T
VCCIO
VCCIO5
5
AC13
PB35B
5
BDQ33
C
AE14
PB36A
5
BDQ33
T
AC14
PB36B
5
BDQ33
C
AF3
PB37A
5
BDQ33
T
GNDIO
GNDIO5
-
AF4
PB37B
5
BDQ33
C
-
-
-
AG4
PB38A
5
BDQ42
T
AG5
PB38B
5
BDQ42
C
GNDIO
GNDIO5
-
-
-
-
AD11
PB48A
5
BDQ51
T
AF13
PB48B
5
BDQ51
C
AF12
PB49A
5
BDQ51
T
VCCIO
VCCIO5
5
AD14
PB49B
5
BDQ51
C
AG8
PB50A
5
BDQ51
T
AF8
PB50B
5
BDQ51
C
AE15
PB51A
5
BDQS51****
T
GNDIO
GNDIO5
BDQ51
C
-
-
-
AC15
PB51B
5
VCCIO
VCCIO5
5
GNDIO
GNDIO5
-
AD15
PB56A
5
BDQ60
T
AF15
PB56B
5
BDQ60
C
AG10
PB57A
5
BDQ60
T
4-211
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AG9
PB57B
5
BDQ60
C
AH14
PB58A
5
BDQ60
T
BDQ60
C
AG12
PB58B
5
VCCIO
VCCIO5
5
AG15
PB59A
5
BDQ60
T
AG13
PB59B
5
BDQ60
C
GNDIO
GNDIO5
-
AF16
PB60A
5
BDQS60
T
AH15
PB60B
5
BDQ60
C
AC16
PB61A
5
VREF2_5/BDQ60
T
AE16
PB61B
5
VREF1_5/BDQ60
C
AG11
PB62A
5
PCLKT5_0/BDQ60
T
PCLKC5_0/BDQ60
C
PCLKT4_0/BDQ69
T
C
AF11
PB62B
5
VCCIO
VCCIO5
5
GNDIO
GNDIO5
-
AJ14
PB67A
4
VCCIO
VCCIO4
4
AK14
PB67B
4
PCLKC4_0/BDQ69
AK15
PB68A
4
VREF2_4/BDQ69
T
AK16
PB68B
4
VREF1_4/BDQ69
C
BDQS69
T
AF18
PB69A
4
GNDIO
GNDIO4
-
AD16
PB69B
4
BDQ69
C
AJ15
PB70A
4
BDQ69
T
AG16
PB70B
4
BDQ69
C
AE17
PB71A
4
BDQ69
T
VCCIO
VCCIO4
4
AC17
PB71B
4
BDQ69
C
AH16
PB72A
4
BDQ69
T
AK17
PB72B
4
BDQ69
C
BDQ69
T
AG20
PB73A
4
GNDIO
GNDIO4
-
AG21
PB73B
4
BDQ69
C
AG18
PB74A
4
BDQ78
T
AJ16
PB74B
4
BDQ78
C
AF21
PB75A
4
BDQ78
T
AG22
PB75B
4
BDQ78
C
AD17
PB76A
4
BDQ78
T
BDQ78
C
AF19
PB76B
4
VCCIO
VCCIO4
4
GNDIO
GNDIO4
-
AH17
PB80A
4
BDQ78
T
AJ17
PB80B
4
BDQ78
C
4-212
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
VCCIO
VCCIO4
4
AF26
PB82A
4
BDQ78
T
AE25
GNDIO
PB82B
4
BDQ78
C
GNDIO4
-
AD24
PB92A
4
BDQ96
T
AE24
PB92B
4
BDQ96
C
AD18
PB93A
4
BDQ96
T
AC18
PB93B
4
BDQ96
C
AE18
PB94A
4
BDQ96
T
AG19
PB94B
4
BDQ96
C
VCCIO
VCCIO4
4
GNDIO
GNDIO4
-
AC19
PB96A
4
BDQS96
T
AD20
PB96B
4
BDQ96
C
AB18
PB97A
4
BDQ96
T
AC20
PB97B
4
BDQ96
C
AE20
PB98A
4
BDQ96
T
AE21
PB98B
4
BDQ96
C
VCCIO
VCCIO4
4
AC23
PB99A
4
BDQ96
T
BDQ96
C
AD23
PB99B
4
GNDIO
GNDIO4
-
AH18
LRC_SQ_VCCRX3
13
AK19
LRC_SQ_HDINP3
13
AJ18
LRC_SQ_VCCIB3
13
AJ19
LRC_SQ_HDINN3
13
AH21
LRC_SQ_VCCTX3
13
AK22
LRC_SQ_HDOUTP3
13
AK21
LRC_SQ_VCCOB3
13
AJ22
LRC_SQ_HDOUTN3
13
AH22
LRC_SQ_VCCTX2
13
AJ23
LRC_SQ_HDOUTN2
13
AH23
LRC_SQ_VCCOB2
13
AK23
LRC_SQ_HDOUTP2
13
AH19
LRC_SQ_VCCRX2
13
AJ20
LRC_SQ_HDINN2
13
T
C
T
C
C
T
C
AH20
LRC_SQ_VCCIB2
13
AK20
LRC_SQ_HDINP2
13
AH24
LRC_SQ_VCCP
13
AG24
LRC_SQ_REFCLKP
13
T
C
AF24
LRC_SQ_REFCLKN
13
AJ24
LRC_SQ_VCCAUX33
13
AK28
LRC_SQ_HDINP1
13
4-213
T
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
AH28
LRC_SQ_VCCIB1
13
AJ28
LRC_SQ_HDINN1
13
AH29
LRC_SQ_VCCRX1
13
AK25
LRC_SQ_HDOUTP1
13
AH25
LRC_SQ_VCCOB1
13
AJ25
LRC_SQ_HDOUTN1
13
AH26
LRC_SQ_VCCTX1
13
AJ26
LRC_SQ_HDOUTN0
13
AK27
LRC_SQ_VCCOB0
13
AK26
LRC_SQ_HDOUTP0
13
AH27
LRC_SQ_VCCTX0
13
AJ29
LRC_SQ_HDINN0
13
AJ30
LRC_SQ_VCCIB0
13
AK29
LRC_SQ_HDINP0
13
AH30
LRC_SQ_VCCRX0
13
AG27
CFG2
8
AD25
CFG1
8
AG28
CFG0
8
AG30
PROGRAMN
8
AG29
CCLK
8
AC24
INITN
8
AF27
DONE
8
GNDIO
GNDIO8
-
AF28
WRITEN***
8
AE26
CS1N***
8
AB23
CSN***
8
AF29
D0/SPIFASTN***
8
VCCIO
VCCIO8
8
AF30
D1***
8
AD26
D2***
8
AE29
D3***
8
GNDIO
GNDIO8
-
AE30
D4***
8
AD29
D5***
8
AC25
D6***
8
AD30
D7***
8
VCCIO
VCCIO8
8
AA22
DI/CSSPI0N***
8
AC26
DOUT/CSON/CSSPI1N***
8
AA23
BUSY/SISPI***
8
AB22
RLM0_PLLCAP
3
AC27
PR102B
3
GNDIO
GNDIO3
-
4-214
Dual Function
Differential
C
T
C
C
T
C
T
RLM0_GDLLC_FB_A/RDQ99
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
AC28
PR102A
3
RLM0_GDLLT_FB_A/RDQ99
T
AC29
PR101B
3
RLM0_GDLLC_IN_A**/RDQ99
C (LVDS)*
AC30
PR101A
3
RLM0_GDLLT_IN_A**/RDQ99
T (LVDS)*
AB30
PR100B
3
RLM0_GPLLC_IN_A**/RDQ99
C
RLM0_GPLLT_IN_A**/RDQ99
T
VCCIO
VCCIO3
3
AA30
PR100A
3
AB29
PR99B
3
RLM0_GPLLC_FB_A/RDQ99
C (LVDS)*
AB28
PR99A
3
RLM0_GPLLT_FB_A/RDQS99
T (LVDS)*
GNDIO
GNDIO3
-
Y22
PR98B
3
RDQ99
C
Y23
PR98A
3
RDQ99
T
AB26
PR97B
3
RDQ99
C (LVDS)*
RDQ99
T (LVDS)*
AB27
PR97A
3
VCCIO
VCCIO3
3
Y24
PR96B
3
RDQ99
C
Y25
PR96A
3
RDQ99
T
AA29
PR95B
3
RDQ99
C (LVDS)*
Y28
PR95A
3
RDQ99
T (LVDS)*
Y30
PR93B
3
RDQ90
C
Y29
PR93A
3
RDQ90
T
GNDIO
GNDIO3
-
VCCIO
VCCIO3
3
W22
PR83B
3
RDQ81
C (LVDS)*
V22
PR83A
3
RDQ81
T (LVDS)*
RDQ81
C
Y27
PR82B
3
VCCIO
VCCIO3
3
Y26
PR82A
3
RDQ81
T
W30
PR81B
3
RDQ81
C (LVDS)*
RDQS81
T (LVDS)*
W29
PR81A
3
GNDIO
GNDIO3
-
W25
PR80B
3
RDQ81
C
W26
PR80A
3
RDQ81
T
U29
PR79B
3
RDQ81
C (LVDS)*
V29
PR79A
3
RDQ81
T (LVDS)*
VCCIO
VCCIO3
3
V30
PR78B
3
RDQ81
C
U30
PR78A
3
RDQ81
T
W27
PR77B
3
RDQ81
C (LVDS)*
W28
PR77A
3
RDQ81
T (LVDS)*
V24
PR75B
3
RDQ72
C
RDQ72
T
RDQ72
C (LVDS)*
V25
PR75A
3
GNDIO
GNDIO3
-
U28
PR74B
3
4-215
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
U27
PR74A
3
RDQ72
T (LVDS)*
U23
PR73B
3
RDQ72
C
RDQ72
T
V23
PR73A
3
VCCIO
VCCIO3
3
V26
PR72B
3
RDQ72
C (LVDS)*
U26
PR72A
3
RDQS72
T (LVDS)*
U25
PR71B
3
RDQ72
C
GNDIO
GNDIO3
-
U24
PR71A
3
RDQ72
T
T30
PR70B
3
RDQ72
C (LVDS)*
R30
PR70A
3
RDQ72
T (LVDS)*
T23
PR69B
3
RDQ72
C
VCCIO
VCCIO3
3
T22
PR69A
3
RDQ72
T
T29
PR68B
3
RDQ72
C (LVDS)*
T28
PR68A
3
RDQ72
T (LVDS)*
R23
PR66B
3
RLM4_SPLLC_FB_A/RDQ63
C
GNDIO
GNDIO3
-
-
-
-
R22
PR66A
3
RLM4_SPLLT_FB_A/RDQ63
T
P30
PR65B
3
RLM4_SPLLC_IN_A/RDQ63
C (LVDS)*
R29
PR65A
3
RLM4_SPLLT_IN_A/RDQ63
T (LVDS)*
T27
PR64B
3
RDQ63
C
VCCIO
VCCIO3
3
RDQ63
T
T26
PR64A
3
GNDIO
GNDIO3
-
N30
PR61B
3
RDQ63
C (LVDS)*
N29
PR61A
3
RDQ63
T (LVDS)*
VCCIO
VCCIO3
3
R27
PR60B
3
VREF2_3/RDQ63
C
R28
PR60A
3
VREF1_3/RDQ63
T
P29
PR59B
3
PCLKC3_0/RDQ63
C (LVDS)*
P28
PR59A
3
PCLKT3_0/RDQ63
T (LVDS)*
M30
PR57B
2
PCLKC2_0/RDQ54
C
PCLKT2_0/RDQ54
T
M29
PR57A
2
GNDIO
GNDIO2
-
P23
PR56B
2
RDQ54
C (LVDS)*
P24
PR56A
2
RDQ54
T (LVDS)*
R26
PR55B
2
RDQ54
C
P27
PR55A
2
RDQ54
T
VCCIO
VCCIO2
2
P25
PR54B
2
RDQ54
C (LVDS)*
P26
PR54A
2
RDQS54
T (LVDS)*
4-216
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
RDQ54
C
K30
PR53B
2
GNDIO
GNDIO2
-
K29
PR53A
2
RDQ54
T
N22
PR52B
2
RDQ54
C (LVDS)*
P22
PR52A
2
RDQ54
T (LVDS)*
J30
PR51B
2
RUM3_SPLLC_FB_A/RDQ54
C
VCCIO
VCCIO2
2
J29
PR51A
2
RUM3_SPLLT_FB_A/RDQ54
T
N24
PR50B
2
RUM3_SPLLC_IN_A/RDQ54
C (LVDS)*
N23
PR50A
2
RUM3_SPLLT_IN_A/RDQ54
T (LVDS)*
N25
PR48B
2
RDQ45
C
N26
PR48A
2
RDQ45
T
GNDIO
GNDIO2
-
M27
PR47B
2
RDQ45
C (LVDS)*
M28
PR47A
2
RDQ45
T (LVDS)*
H30
PR46B
2
RDQ45
C
RDQ45
T
G30
PR46A
2
VCCIO
VCCIO2
2
M25
PR45B
2
RDQ45
C (LVDS)*
M26
PR45A
2
RDQS45
T (LVDS)*
RDQ45
C
L30
PR44B
2
GNDIO
GNDIO2
-
L29
PR44A
2
RDQ45
T
L28
PR43B
2
RDQ45
C (LVDS)*
L27
PR43A
2
RDQ45
T (LVDS)*
H29
PR42B
2
RDQ45
C
VCCIO
VCCIO2
2
G29
PR42A
2
RDQ45
T
L22
PR41B
2
RDQ45
C (LVDS)*
M22
PR41A
2
RDQ45
T (LVDS)*
F30
PR40B
2
GNDIO
GNDIO2
-
C
F29
PR40A
2
VCCIO
VCCIO2
2
GNDIO
GNDIO2
-
E30
PR34B
2
RDQ32
C (LVDS)*
E29
PR34A
2
RDQ32
T (LVDS)*
-
-
-
L25
PR33B
2
RDQ32
C
L26
PR33A
2
RDQ32
T
VCCIO
VCCIO2
2
H28
PR32B
2
RDQ32
C (LVDS)*
J28
PR32A
2
RDQS32
T (LVDS)*
4-217
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
G28
PR31B
2
RDQ32
C
GNDIO
GNDIO2
-
G27
PR31A
2
RDQ32
T
L24
PR30B
2
RDQ32
C (LVDS)*
L23
PR30A
2
RDQ32
T (LVDS)*
D30
PR29B
2
RDQ32
C
VCCIO
VCCIO2
2
D29
PR29A
2
RDQ32
T
K24
PR28B
2
RDQ32
C (LVDS)*
K25
PR28A
2
RDQ32
T (LVDS)*
RDQ23
C
J27
PR26B
2
GNDIO
GNDIO2
-
K26
PR26A
2
RDQ23
T
K23
PR25B
2
RDQ23
C (LVDS)*
K22
PR25A
2
RDQ23
T (LVDS)*
J22
PR24B
2
RDQ23
C
VCCIO
VCCIO2
2
J23
PR24A
2
RDQ23
T
GNDIO
GNDIO2
-
VCCIO
VCCIO2
2
J26
PR17B
2
RDQ15
C (LVDS)*
H26
PR17A
2
RDQ15
T (LVDS)*
H27
PR16B
2
RDQ15
C
G26
PR16A
2
RDQ15
T
VCCIO
VCCIO2
2
H23
PR15B
2
RDQ15
C (LVDS)*
H24
PR15A
2
RDQS15
T (LVDS)*
D28
PR14B
2
RDQ15
C
GNDIO
GNDIO2
-
E28
PR14A
2
RDQ15
T
G24
PR13B
2
RDQ15
C (LVDS)*
H25
PR13A
2
RDQ15
T (LVDS)*
RUM0_SPLLC_FB_A/RDQ15
C
D27
PR12B
2
VCCIO
VCCIO2
2
E27
PR12A
2
RUM0_SPLLT_FB_A/RDQ15
T
F26
PR11B
2
RUM0_SPLLC_IN_A/RDQ15
C (LVDS)*
G25
PR11A
2
RUM0_SPLLT_IN_A/RDQ15
T (LVDS)*
F24
PR9B
2
VREF2_2
C
-
-
-
GNDIO
GNDIO2
VREF1_2
T
F25
PR9A
2
VCCIO
VCCIO2
2
G23
XRES
1
4-218
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
C30
URC_SQ_VCCRX0
12
A29
URC_SQ_HDINP0
12
B30
URC_SQ_VCCIB0
12
B29
URC_SQ_HDINN0
12
C27
URC_SQ_VCCTX0
12
A26
URC_SQ_HDOUTP0
12
A27
URC_SQ_VCCOB0
12
B26
URC_SQ_HDOUTN0
12
C26
URC_SQ_VCCTX1
12
B25
URC_SQ_HDOUTN1
12
C25
URC_SQ_VCCOB1
12
A25
URC_SQ_HDOUTP1
12
C29
URC_SQ_VCCRX1
12
B28
URC_SQ_HDINN1
12
C28
URC_SQ_VCCIB1
12
A28
URC_SQ_HDINP1
12
B24
URC_SQ_VCCAUX33
12
E24
URC_SQ_REFCLKN
12
C
D24
URC_SQ_REFCLKP
12
T
C24
URC_SQ_VCCP
12
A20
URC_SQ_HDINP2
12
C20
URC_SQ_VCCIB2
12
B20
URC_SQ_HDINN2
12
C19
URC_SQ_VCCRX2
12
A23
URC_SQ_HDOUTP2
12
C23
URC_SQ_VCCOB2
12
B23
URC_SQ_HDOUTN2
12
C22
URC_SQ_VCCTX2
12
B22
URC_SQ_HDOUTN3
12
A21
URC_SQ_VCCOB3
12
A22
URC_SQ_HDOUTP3
12
C21
URC_SQ_VCCTX3
12
B19
URC_SQ_HDINN3
12
B18
URC_SQ_VCCIB3
12
A19
URC_SQ_HDINP3
12
C18
URC_SQ_VCCRX3
12
D23
PT100B
1
GNDIO
GNDIO1
-
Dual Function
Differential
T
C
T
C
C
T
C
T
T
C
T
C
C
T
C
T
C
E21
PT100A
1
T
D26
PT99B
1
C
E26
PT99A
1
T
E23
PT98B
1
C
VCCIO
VCCIO1
1
4-219
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
G22
PT98A
1
-
-
-
D22
PT97B
1
C
F21
PT97A
1
T
T
G18
PT96B
1
C
H18
PT96A
1
T
C
D20
PT95B
1
GNDIO
GNDIO1
-
D21
PT95A
1
T
E20
PT94B
1
C
VCCIO
VCCIO1
1
E19
PT94A
1
T
D19
PT93B
1
C
E18
PT93A
1
T
D18
PT92B
1
C
C17
PT92A
1
T
A17
PT91B
1
C
B17
PT91A
1
T
GNDIO
GNDIO1
-
VCCIO
VCCIO1
1
J18
PT75B
1
C
J19
PT75A
1
T
H17
PT74B
1
C
J17
PT74A
1
T
F18
PT73B
1
C
F17
PT73A
1
T
GNDIO
GNDIO1
-
A16
PT72B
1
B16
PT72A
1
T
G17
PT71B
1
C
T
C
G16
PT71A
1
VCCIO
VCCIO1
1
H16
PT70B
1
C
F16
PT70A
1
T
J16
PT69B
1
C
G15
PT69A
1
T
GNDIO
GNDIO1
-
C16
PT68B
1
C
D16
PT68A
1
T
J15
PT67B
1
C
T
H15
PT67A
1
VCCIO
VCCIO1
1
A15
PT66B
1
4-220
VREF2_1
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
B15
PT66A
1
VREF1_1
T
F15
PT65B
1
PCLKC1_0
C
E16
PT65A
1
PCLKT1_0
T
C15
PT64B
0
PCLKC0_0
C
GNDIO
GNDIO0
-
D15
PT64A
0
PCLKT0_0
T
C14
PT63B
0
VREF2_0
C
E15
PT63A
0
VREF1_0
T
G14
PT62B
0
VCCIO
VCCIO0
0
C
J14
PT62A
0
T
F14
PT61B
0
C
H14
PT61A
0
T
A14
PT60B
0
C
B14
PT60A
0
T
D13
PT59B
0
C
GNDIO
GNDIO0
-
F13
PT59A
0
T
C
G13
PT58B
0
VCCIO
VCCIO0
0
J11
PT58A
0
D4
PT57B
0
T
D5
PT56A
0
E5
PT55B
0
C
T
F6
PT55A
0
GNDIO
GNDIO0
-
VCCIO
VCCIO0
0
F7
PT52B
0
C
T
D8
PT52A
0
GNDIO
GNDIO0
-
J13
PT50B
0
C
G11
PT50A
0
T
H13
PT49B
0
C
H12
PT49A
0
T
VCCIO
VCCIO0
0
E8
PT48B
0
C
D9
PT48A
0
T
D12
PT46B
0
C
GNDIO
GNDIO0
-
E13
PT46A
0
VCCIO
VCCIO0
0
GNDIO
GNDIO0
-
J12
PT31B
0
4-221
T
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Dual Function
Differential
-
-
-
VCCIO
VCCIO0
0
H10
PT31A
0
T
E12
PT30B
0
C
D11
PT30A
0
T
H11
PT29B
0
C
T
F11
PT29A
0
C13
ULC_SQ_VCCRX0
11
A12
ULC_SQ_HDINP0
11
B13
ULC_SQ_VCCIB0
11
B12
ULC_SQ_HDINN0
11
C10
ULC_SQ_VCCTX0
11
A9
ULC_SQ_HDOUTP0
11
A10
ULC_SQ_VCCOB0
11
B9
ULC_SQ_HDOUTN0
11
C9
ULC_SQ_VCCTX1
11
B8
ULC_SQ_HDOUTN1
11
C8
ULC_SQ_VCCOB1
11
A8
ULC_SQ_HDOUTP1
11
C12
ULC_SQ_VCCRX1
11
B11
ULC_SQ_HDINN1
11
C11
ULC_SQ_VCCIB1
11
T
C
T
C
C
T
C
A11
ULC_SQ_HDINP1
11
B7
ULC_SQ_VCCAUX33
11
E7
ULC_SQ_REFCLKN
11
C
D7
ULC_SQ_REFCLKP
11
T
C7
ULC_SQ_VCCP
11
A3
ULC_SQ_HDINP2
11
C3
ULC_SQ_VCCIB2
11
B3
ULC_SQ_HDINN2
11
C2
ULC_SQ_VCCRX2
11
A6
ULC_SQ_HDOUTP2
11
C6
ULC_SQ_VCCOB2
11
B6
ULC_SQ_HDOUTN2
11
C5
ULC_SQ_VCCTX2
11
B5
ULC_SQ_HDOUTN3
11
A4
ULC_SQ_VCCOB3
11
A5
ULC_SQ_HDOUTP3
11
C4
ULC_SQ_VCCTX3
11
B2
ULC_SQ_HDINN3
11
B1
ULC_SQ_VCCIB3
11
A2
ULC_SQ_HDINP3
11
C1
ULC_SQ_VCCRX3
11
4-222
T
T
C
T
C
C
T
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
L12
VCC
-
L13
VCC
-
L18
VCC
-
L19
VCC
-
M11
VCC
-
M12
VCC
-
M13
VCC
-
M14
VCC
-
M15
VCC
-
M16
VCC
-
M17
VCC
-
M18
VCC
-
M19
VCC
-
M20
VCC
-
N11
VCC
-
N12
VCC
-
N19
VCC
-
N20
VCC
-
P12
VCC
-
P19
VCC
-
R12
VCC
-
R19
VCC
-
T12
VCC
-
T19
VCC
-
U12
VCC
-
U19
VCC
-
V11
VCC
-
V12
VCC
-
V19
VCC
-
V20
VCC
-
W11
VCC
-
W12
VCC
-
W13
VCC
-
W14
VCC
-
W15
VCC
-
W16
VCC
-
W17
VCC
-
W18
VCC
-
W19
VCC
-
W20
VCC
-
Y12
VCC
-
Y13
VCC
-
Y18
VCC
-
4-223
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
Y19
VCC
-
D14
VCCIO0
0
E6
VCCIO0
0
E9
VCCIO0
0
F12
VCCIO0
0
K12
VCCIO0
0
K13
VCCIO0
0
D17
VCCIO1
1
E22
VCCIO1
1
E25
VCCIO1
1
F19
VCCIO1
1
K18
VCCIO1
1
K19
VCCIO1
1
F28
VCCIO2
2
J25
VCCIO2
2
K28
VCCIO2
2
M21
VCCIO2
2
M24
VCCIO2
2
N21
VCCIO2
2
N28
VCCIO2
2
P21
VCCIO2
2
R25
VCCIO2
2
AA28
VCCIO3
3
AB25
VCCIO3
3
AE28
VCCIO3
3
T25
VCCIO3
3
U21
VCCIO3
3
V21
VCCIO3
3
V28
VCCIO3
3
W21
VCCIO3
3
W24
VCCIO3
3
AA18
VCCIO4
4
AA19
VCCIO4
4
AE19
VCCIO4
4
AF22
VCCIO4
4
AG17
VCCIO4
4
AG25
VCCIO4
4
AA12
VCCIO5
5
AA13
VCCIO5
5
AE12
VCCIO5
5
AF9
VCCIO5
5
AG14
VCCIO5
5
AG6
VCCIO5
5
4-224
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
AA3
VCCIO6
6
AB6
VCCIO6
6
AE3
VCCIO6
6
T6
VCCIO6
6
U10
VCCIO6
6
V10
VCCIO6
6
V3
VCCIO6
6
W10
VCCIO6
6
W7
VCCIO6
6
F3
VCCIO7
7
J6
VCCIO7
7
K3
VCCIO7
7
M10
VCCIO7
7
M7
VCCIO7
7
N10
VCCIO7
7
N3
VCCIO7
7
P10
VCCIO7
7
R6
VCCIO7
7
AA25
VCCIO8
8
AD28
VCCIO8
8
AA10
VCCAUX
-
AA11
VCCAUX
-
AA20
VCCAUX
-
AA21
VCCAUX
-
K10
VCCAUX
-
K11
VCCAUX
-
K20
VCCAUX
-
K21
VCCAUX
-
L10
VCCAUX
-
L11
VCCAUX
-
L20
VCCAUX
-
L21
VCCAUX
-
Y10
VCCAUX
-
Y11
VCCAUX
-
Y20
VCCAUX
-
Y21
VCCAUX
-
A1
GND
-
A13
GND
-
A18
GND
-
A24
GND
-
A30
GND
-
A7
GND
-
AA14
GND
-
4-225
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
AA15
GND
-
AA16
GND
-
AA17
GND
-
AA24
GND
-
AA27
GND
-
AA4
GND
-
AB24
GND
-
AB7
GND
-
AD12
GND
-
AD19
GND
-
AD27
GND
-
AE22
GND
-
AE27
GND
-
AE4
GND
-
AE9
GND
-
AF14
GND
-
AF17
GND
-
AF25
GND
-
AF6
GND
-
AJ10
GND
-
AJ21
GND
-
AJ27
GND
-
AJ4
GND
-
AK1
GND
-
AK13
GND
-
AK18
GND
-
AK24
GND
-
AK30
GND
-
AK7
GND
-
B10
GND
-
B21
GND
-
B27
GND
-
B4
GND
-
D25
GND
-
D6
GND
-
E14
GND
-
E17
GND
-
F22
GND
-
F27
GND
-
F4
GND
-
F9
GND
-
G12
GND
-
G19
GND
-
4-226
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
J24
GND
-
J7
GND
-
K14
GND
-
K15
GND
-
K16
GND
-
K17
GND
-
K27
GND
-
K4
GND
-
L14
GND
-
L15
GND
-
L16
GND
-
L17
GND
-
M23
GND
-
M8
GND
-
N14
GND
-
N15
GND
-
N16
GND
-
N17
GND
-
N27
GND
-
N4
GND
-
P11
GND
-
P13
GND
-
P14
GND
-
P15
GND
-
P16
GND
-
P17
GND
-
P18
GND
-
P20
GND
-
R10
GND
-
R11
GND
-
R13
GND
-
R14
GND
-
R15
GND
-
R16
GND
-
R17
GND
-
R18
GND
-
R20
GND
-
R21
GND
-
R24
GND
-
R7
GND
-
T10
GND
-
T11
GND
-
T13
GND
-
4-227
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
T14
GND
-
T15
GND
-
T16
GND
-
T17
GND
-
T18
GND
-
T20
GND
-
T21
GND
-
T24
GND
-
T7
GND
-
U11
GND
-
U13
GND
-
U14
GND
-
U15
GND
-
U16
GND
-
U17
GND
-
U18
GND
-
U20
GND
-
V14
GND
-
V15
GND
-
V16
GND
-
V17
GND
-
V27
GND
-
V4
GND
-
W23
GND
-
W8
GND
-
Y14
GND
-
Y15
GND
-
Y16
GND
-
Y17
GND
-
AA26
NC
-
AB10
NC
-
AB11
NC
-
AB12
NC
-
AB13
NC
-
AB14
NC
-
AB15
NC
-
AB16
NC
-
AB17
NC
-
AB19
NC
-
AB20
NC
-
AB21
NC
-
AB9
NC
-
AC10
NC
-
4-228
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
AC11
NC
-
AC21
NC
-
AC22
NC
-
AC8
NC
-
AC9
NC
-
AD21
NC
-
AD22
NC
-
AD4
NC
-
AD5
NC
-
AD6
NC
-
AD7
NC
-
AD8
NC
-
AE23
NC
-
AE5
NC
-
AE6
NC
-
AE7
NC
-
AF20
NC
-
AF23
NC
-
AF5
NC
-
AG23
NC
-
AG26
NC
-
D10
NC
-
E10
NC
-
E11
NC
-
F10
NC
-
F20
NC
-
F23
NC
-
F8
NC
-
G10
NC
-
G20
NC
-
G21
NC
-
G7
NC
-
G8
NC
-
G9
NC
-
H19
NC
-
H20
NC
-
H21
NC
-
H22
NC
-
H6
NC
-
H8
NC
-
H9
NC
-
J10
NC
-
J20
NC
-
4-229
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M100E/SE Logic Signal Connections: 900 fpBGA (Cont.)
LFE2M100E/SE
Ball Number
Ball/Pad Function
Bank
J21
NC
-
J9
NC
-
K9
NC
-
R9
NC
-
U22
NC
-
W9
NC
-
N13
VCCPLL
-
N18
VCCPLL
-
V13
VCCPLL
-
V18
VCCPLL
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
*** These sysCONFIG pins are dedicated I/O pins for configuration. The outpus are actively driven during normal device operation.
****Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-230
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO7
7
F4
PL9A
7
VREF2_7
F3
PL9B
7
VREF1_7
GNDIO
GNDIO7
-
GNDIO7
-
E1
PL11A
7
LUM0_SPLLT_IN_A/LDQ15
T (LVDS)*
PL11A
7
LUM0_SPLLT_IN_A/LDQ15
T (LVDS)*
E2
PL11B
7
LUM0_SPLLC_IN_A/LDQ15
C (LVDS)*
PL11B
7
LUM0_SPLLC_IN_A/LDQ15
C (LVDS)*
Dual Function
Ball/Pad
Function
Bank
VCCIO7
7
T
PL9A
7
VREF2_7
T
C
PL9B
7
VREF1_7
C
Differential
Dual Function
Differential
K9
PL12A
7
LUM0_SPLLT_FB_A/LDQ15
T
PL12A
7
LUM0_SPLLT_FB_A/LDQ15
T
H7
PL12B
7
LUM0_SPLLC_FB_A/LDQ15
C
PL12B
7
LUM0_SPLLC_FB_A/LDQ15
C
VCCIO
VCCIO7
7
VCCIO7
7
F1
PL13A
7
LDQ15
T (LVDS)*
PL13A
7
LDQ15
T (LVDS)*
F2
PL13B
7
LDQ15
C (LVDS)*
PL13B
7
LDQ15
C (LVDS)*
J8
PL14A
7
LDQ15
T
PL14A
7
LDQ15
T
H6
PL14B
7
LDQ15
C
PL14B
7
LDQ15
C
GNDIO
GNDIO7
-
GNDIO7
-
G2
PL15A
7
LDQS15
T (LVDS)*
PL15A
7
LDQS15
T (LVDS)*
G1
PL15B
7
LDQ15
C (LVDS)*
PL15B
7
LDQ15
C (LVDS)*
LDQ15
T
LDQ15
T
J7
PL16A
7
VCCIO
VCCIO7
7
L8
PL16B
7
LDQ15
L9
PL17A
7
LDQ15
PL16A
7
VCCIO7
7
C
PL16B
7
LDQ15
C
T (LVDS)*
PL17A
7
LDQ15
T (LVDS)*
L10
PL17B
7
LDQ15
C (LVDS)*
PL17B
7
LDQ15
C (LVDS)*
H5
PL18A
7
LDQ15
T
PL18A
7
LDQ15
T
GNDIO
GNDIO7
-
GNDIO7
-
J6
PL18B
7
PL18B
7
LDQ15
C
H2
NC
-
PL19A
7
LDQ23
T (LVDS)*
C (LVDS)*
LDQ15
C
H1
NC
-
PL19B
7
LDQ23
G5
NC
-
PL20A
7
LDQ23
T
G6
NC
-
PL20B
7
LDQ23
C
M9
NC
-
PL21A
7
LDQ23
T (LVDS)*
-
-
-
VCCIO7
7
M10
NC
-
PL21B
7
LDQ23
C (LVDS)*
H3
NC
-
PL22A
7
LDQ23
T
H4
NC
-
PL22B
7
LDQ23
C
J2
PL19A
7
PL23A
7
LDQS23
T (LVDS)*
-
-
-
GNDIO7
C (LVDS)*
T (LVDS)*
J1
PL19B
7
C (LVDS)*
PL23B
7
LDQ23
K2
PL20A
7
T
PL24A
7
LDQ23
T
K1
PL20B
7
C
PL24B
7
LDQ23
C
VCCIO
VCCIO7
7
VCCIO7
7
J4
PL21A
7
T (LVDS)*
PL25A
7
LDQ23
T (LVDS)*
J3
PL21B
7
C (LVDS)*
PL25B
7
LDQ23
C (LVDS)*
J5
PL22A
7
T
PL26A
7
LDQ23
T
K5
PL22B
7
C
PL26B
7
LDQ23
C
GNDIO
GNDIO7
-
GNDIO7
-
L2
PL24A
7
LDQ28
T (LVDS)*
PL28A
7
LDQ32
T (LVDS)*
L1
PL24B
7
LDQ28
C (LVDS)*
PL28B
7
LDQ32
C (LVDS)*
L7
PL25A
7
LDQ28
T
PL29A
7
LDQ32
T
K6
PL25B
7
LDQ28
C
PL29B
7
LDQ32
C
VCCIO
VCCIO7
7
VCCIO7
7
M2
PL26A
7
LDQ28
T (LVDS)*
PL30A
7
LDQ32
T (LVDS)*
4-231
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
M1
PL26B
7
LDQ28
Bank
Dual Function
Differential
C (LVDS)*
PL30B
7
LDQ32
L6
PL27A
7
C (LVDS)*
LDQ28
T
PL31A
7
LDQ32
L5
PL27B
7
T
LDQ28
C
PL31B
7
LDQ32
C
GNDIO
GNDIO7
-
L3
PL28A
GNDIO7
-
7
LDQS28
T (LVDS)*
PL32A
7
L4
PL28B
LDQS32
T (LVDS)*
7
LDQ28
C (LVDS)*
PL32B
7
LDQ32
C (LVDS)*
LDQ28
T
PL33A
7
LDQ32
T
VCCIO7
7
M3
PL29A
7
VCCIO
VCCIO7
7
M4
PL29B
7
LDQ28
C
PL33B
7
LDQ32
C
N1
PL30A
7
LDQ28
T (LVDS)*
PL34A
7
LDQ32
T (LVDS)*
N2
PL30B
7
LDQ28
C (LVDS)*
PL34B
7
LDQ32
C (LVDS)*
M5
PL31A
7
LDQ28
T
PL35A
7
LDQ32
T
GNDIO
GNDIO7
-
GNDIO7
-
N6
PL31B
7
PL35B
7
P3
NC
-
PL37A
7
LDQ28
C
LDQ32
C
T (LVDS)*
-
-
-
GNDIO7
-
P4
NC
-
PL37B
7
P9
NC
-
PL38A
7
T
M7
NC
-
PL38B
7
C
C (LVDS)*
-
-
-
VCCIO7
7
P1
NC
-
PL39A
7
T (LVDS)*
P2
NC
-
PL39B
7
C (LVDS)*
N7
NC
-
PL40A
7
T
P7
NC
-
PL40B
7
C
-
-
-
GNDIO7
-
P5
PL33A
7
LDQ37
T (LVDS)*
PL41A
7
LDQ45
T (LVDS)*
N5
PL33B
7
LDQ37
C (LVDS)*
PL41B
7
LDQ45
C (LVDS)*
P8
PL34A
7
LDQ37
T
PL42A
7
LDQ45
T
P6
PL34B
7
LDQ37
C
PL42B
7
LDQ45
C
VCCIO
VCCIO7
7
VCCIO7
7
R3
PL35A
7
LDQ37
T (LVDS)*
PL43A
7
LDQ45
T (LVDS)*
R4
PL35B
7
LDQ37
C (LVDS)*
PL43B
7
LDQ45
C (LVDS)*
R10
PL36A
7
LDQ37
T
PL44A
7
LDQ45
T
P11
PL36B
7
LDQ37
C
PL44B
7
LDQ45
C
GNDIO
GNDIO7
-
GNDIO7
-
R7
PL37A
7
LDQS37
T (LVDS)*
PL45A
7
LDQS45
T (LVDS)*
R8
PL37B
7
LDQ37
C (LVDS)*
PL45B
7
LDQ45
C (LVDS)*
LDQ37
T
PL46A
7
LDQ45
T
VCCIO7
7
R5
PL38A
7
VCCIO
VCCIO7
7
T5
PL38B
7
LDQ37
C
PL46B
7
LDQ45
C
R1
PL39A
7
LDQ37
T (LVDS)*
PL47A
7
LDQ45
T (LVDS)*
R2
PL39B
7
LDQ37
C (LVDS)*
PL47B
7
LDQ45
C (LVDS)*
R11
PL40A
7
LDQ37
T
PL48A
7
LDQ45
T
GNDIO
GNDIO7
-
GNDIO7
-
T10
PL40B
7
LDQ37
C
PL48B
7
LDQ45
C
T1
PL42A
7
LUM3_SPLLT_IN_A/LDQ46
T (LVDS)*
PL50A
7
LUM3_SPLLT_IN_A/LDQ54
T (LVDS)*
C (LVDS)*
T2
PL42B
7
LUM3_SPLLC_IN_A/LDQ46
C (LVDS)*
PL50B
7
LUM3_SPLLC_IN_A/LDQ54
U10
PL43A
7
LUM3_SPLLT_FB_A/LDQ46
T
PL51A
7
LUM3_SPLLT_FB_A/LDQ54
T
U8
PL43B
7
LUM3_SPLLC_FB_A/LDQ46
C
PL51B
7
LUM3_SPLLC_FB_A/LDQ54
C
VCCIO
VCCIO7
7
T6
PL44A
7
LDQ46
T (LVDS)*
LDQ54
T (LVDS)*
4-232
VCCIO7
7
PL52A
7
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
R6
PL44B
7
LDQ46
Bank
Dual Function
Differential
C (LVDS)*
PL52B
7
LDQ54
U9
PL45A
7
C (LVDS)*
LDQ46
T
PL53A
7
LDQ54
T7
PL45B
7
T
LDQ46
C
PL53B
7
LDQ54
C
GNDIO
GNDIO7
-
U5
PL46A
GNDIO7
-
7
LDQS46
T (LVDS)*
PL54A
7
U6
PL46B
LDQS54
T (LVDS)*
7
LDQ46
C (LVDS)*
PL54B
7
LDQ54
C (LVDS)*
LDQ46
T
LDQ54
T
U7
PL47A
7
VCCIO
VCCIO7
7
PL55A
7
VCCIO7
7
V9
PL47B
7
LDQ46
C
PL55B
7
LDQ54
C
V11
PL48A
7
LDQ46
T (LVDS)*
PL56A
7
LDQ54
T (LVDS)*
V10
PL48B
7
LDQ46
C (LVDS)*
PL56B
7
LDQ54
C (LVDS)*
U4
PL49A
7
PCLKT7_0/LDQ46
T
PL57A
7
PCLKT7_0/LDQ54
T
GNDIO
GNDIO7
-
GNDIO7
-
U3
PL49B
7
PCLKC7_0/LDQ46
C
PL57B
7
PCLKC7_0/LDQ54
C
U2
PL51A
6
PCLKT6_0/LDQ55
T (LVDS)*
PL59A
6
PCLKT6_0/LDQ63
T (LVDS)*
U1
PL51B
6
PCLKC6_0/LDQ55
C (LVDS)*
PL59B
6
PCLKC6_0/LDQ63
C (LVDS)*
V5
PL52A
6
VREF2_6/LDQ55
T
PL60A
6
VREF2_6/LDQ63
T
V6
PL52B
6
VREF1_6/LDQ55
C
PL60B
6
VREF1_6/LDQ63
C
LDQ55
T (LVDS)*
LDQ63
T (LVDS)*
C (LVDS)*
V7
PL53A
6
VCCIO
VCCIO6
6
V8
PL53B
6
LDQ55
V4
PL54A
6
LDQ55
V3
PL54B
6
V2
PL55A
6
GNDIO
GNDIO6
-
PL61A
6
VCCIO6
6
C (LVDS)*
PL61B
6
LDQ63
T
PL62A
6
LDQ63
T
LDQ55
C
PL62B
6
LDQ63
C
LDQS55
T (LVDS)*
LDQS63
T (LVDS)*
C (LVDS)*
PL63A
6
GNDIO6
-
V1
PL55B
6
LDQ55
C (LVDS)*
PL63B
6
LDQ63
W7
PL56A
6
LDQ55
T
PL64A
6
LDQ63
T
W5
PL56B
6
LDQ55
C
PL64B
6
LDQ63
C
VCCIO
VCCIO6
6
VCCIO6
6
W2
PL57A
6
LLM3_SPLLT_IN_A/LDQ55
T (LVDS)*
PL65A
6
LLM4_SPLLT_IN_A/LDQ63
T (LVDS)*
W1
PL57B
6
LLM3_SPLLC_IN_A/LDQ55
C (LVDS)*
PL65B
6
LLM4_SPLLC_IN_A/LDQ63
C (LVDS)*
Y6
PL58A
6
LLM3_SPLLT_FB_A/LDQ55
T
PL66A
6
LLM4_SPLLT_FB_A/LDQ63
T
W6
PL58B
6
LLM3_SPLLC_FB_A/LDQ55
C
PL66B
6
LLM4_SPLLC_FB_A/LDQ63
C
GNDIO
GNDIO6
-
GNDIO6
-
Y1
PL60A
6
LDQ64
T (LVDS)*
PL68A
6
LDQ72
T (LVDS)*
Y2
PL60B
6
LDQ64
C (LVDS)*
PL68B
6
LDQ72
C (LVDS)*
Y7
PL61A
6
LDQ64
T
PL69A
6
LDQ72
T
Y5
PL61B
6
LDQ64
C
PL69B
6
LDQ72
C
VCCIO
VCCIO6
6
VCCIO6
6
W10
PL62A
6
LDQ64
T (LVDS)*
PL70A
6
LDQ72
T (LVDS)*
Y8
PL62B
6
LDQ64
C (LVDS)*
PL70B
6
LDQ72
C (LVDS)*
Y4
PL63A
6
LDQ64
T
PL71A
6
LDQ72
T
Y3
PL63B
6
LDQ64
C
PL71B
6
LDQ72
C
GNDIO
GNDIO6
-
GNDIO6
-
AA1
PL64A
6
LDQS64
T (LVDS)*
PL72A
6
LDQS72
T (LVDS)*
AA2
PL64B
6
LDQ64
C (LVDS)*
PL72B
6
LDQ72
C (LVDS)*
LDQ64
T
PL73A
6
LDQ72
T
VCCIO6
6
AA8
PL65A
6
VCCIO
VCCIO6
6
Y9
PL65B
6
LDQ64
C
PL73B
6
LDQ72
C
AA6
PL66A
6
LDQ64
T (LVDS)*
PL74A
6
LDQ72
T (LVDS)*
AA7
PL66B
6
LDQ64
C (LVDS)*
PL74B
6
LDQ72
C (LVDS)*
4-233
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AA4
PL67A
6
LDQ64
Bank
Dual Function
Differential
T
PL75A
6
LDQ72
GNDIO
GNDIO6
-
T
GNDIO6
-
AA3
PL67B
6
LDQ64
C
PL75B
6
LDQ72
C
AA9
PL69A
6
LDQ73
T (LVDS)*
PL77A
6
LDQ81
T (LVDS)*
C (LVDS)*
AA10
PL69B
6
LDQ73
C (LVDS)*
PL77B
6
LDQ81
AA5
PL70A
6
LDQ73
T
PL78A
6
LDQ81
T
AB6
PL70B
6
LDQ73
C
PL78B
6
LDQ81
C
LDQ73
T (LVDS)*
LDQ81
T (LVDS)*
C (LVDS)*
AB1
PL71A
6
VCCIO
VCCIO6
6
PL79A
6
VCCIO6
6
AB2
PL71B
6
LDQ73
C (LVDS)*
PL79B
6
LDQ81
AC8
PL72A
6
LDQ73
T
PL80A
6
LDQ81
T
AB10
PL72B
6
LDQ73
C
PL80B
6
LDQ81
C
LDQS73
T (LVDS)*
PL81A
6
LDQS81
T (LVDS)*
GNDIO6
C (LVDS)*
AC1
PL73A
6
GNDIO
GNDIO6
-
AC2
PL73B
6
LDQ73
C (LVDS)*
PL81B
6
LDQ81
AB7
PL74A
6
LDQ73
T
PL82A
6
LDQ81
T
AB5
PL74B
6
LDQ73
C
PL82B
6
LDQ81
C
VCCIO
VCCIO6
6
VCCIO6
6
AC3
PL75A
6
LDQ73
T (LVDS)*
PL83A
6
LDQ81
T (LVDS)*
AC4
PL75B
6
LDQ73
C (LVDS)*
PL83B
6
LDQ81
C (LVDS)*
AC10
PL76A
6
LDQ73
T
PL84A
6
LDQ81
T
AC9
PL76B
6
LDQ73
C
PL84B
6
LDQ81
C
GNDIO
GNDIO6
-
GNDIO6
-
AC7
NC
-
PL86A
6
LDQ90
T (LVDS)*
AC5
NC
-
PL86B
6
LDQ90
C (LVDS)*
AC6
NC
-
PL87A
6
LDQ90
T
AD5
NC
-
PL87B
6
LDQ90
C
-
-
-
VCCIO6
6
AD4
NC
-
PL88A
6
LDQ90
T (LVDS)*
AD3
NC
-
PL88B
6
LDQ90
C (LVDS)*
AD10
NC
-
PL89A
6
LDQ90
T
AD8
NC
-
PL89B
6
LDQ90
C
-
-
-
GNDIO6
-
AD2
NC
-
PL90A
6
LDQS90
T (LVDS)*
AD1
NC
-
PL90B
6
LDQ90
C (LVDS)*
AD9
NC
-
PL91A
6
LDQ90
T
-
-
-
VCCIO6
6
AC11
NC
-
PL91B
6
LDQ90
C
AD6
NC
-
PL92A
6
LDQ90
T (LVDS)*
AD7
NC
-
PL92B
6
LDQ90
C (LVDS)*
AE1
NC
-
PL93A
6
LDQ90
T
-
-
-
GNDIO6
-
AE2
NC
-
PL93B
6
LDQ90
C
AF2
PL78A
6
LDQ82
T (LVDS)*
PL95A
6
LDQ99
T (LVDS)*
C (LVDS)*
AF1
PL78B
6
LDQ82
C (LVDS)*
PL95B
6
LDQ99
AE5
PL79A
6
LDQ82
T
PL96A
6
LDQ99
T
AE6
PL79B
6
LDQ82
C
PL96B
6
LDQ99
C
LDQ82
T (LVDS)*
LDQ99
T (LVDS)*
AF4
PL80A
6
VCCIO
VCCIO6
6
AF3
PL80B
6
LDQ82
AF5
PL81A
6
LDQ82
PL97A
6
VCCIO6
6
C (LVDS)*
PL97B
6
LDQ99
C (LVDS)*
T
PL98A
6
LDQ99
T
4-234
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AF6
PL81B
6
LDQ82
Bank
Dual Function
C
PL98B
6
LDQ99
AG1
PL82A
6
LLM0_GPLLT_IN_A**/LDQS82
C
T (LVDS)*
PL99A
6
LLM0_GPLLT_IN_A**/
LDQS99
T (LVDS)*
GNDIO
GNDIO6
-
GNDIO6
-
AG2
PL82B
6
C (LVDS)*
PL99B
6
LLM0_GPLLC_IN_A**/
LDQ99
C (LVDS)*
AE9
PL83A
6
AF7
PL83B
6
LLM0_GPLLT_FB_A/LDQ82
T
PL100A
6
LLM0_GPLLT_FB_A/LDQ99
T
LLM0_GPLLC_FB_A/LDQ82
C
PL100B
6
LLM0_GPLLC_FB_A/LDQ99
C
VCCIO
VCCIO6
6
AH1
PL84A
6
LLM0_GDLLT_IN_A**/LDQ82
T (LVDS)*
VCCIO6
PL101A
6
6
LLM0_GDLLT_IN_A**/LDQ99
T (LVDS)*
AH2
PL84B
6
LLM0_GDLLC_IN_A**/LDQ82
C (LVDS)*
PL101B
6
LLM0_GDLLC_IN_A**/
LDQ99
C (LVDS)*
AG5
PL85A
6
LLM0_GDLLT_FB_A/LDQ82
T
PL102A
6
LLM0_GDLLT_FB_A/LDQ99
T
AG4
PL85B
6
LLM0_GDLLC_FB_A/LDQ82
C
PL102B
6
LLM0_GDLLC_FB_A/LDQ99
C
LLM0_GPLLC_IN_A**/LDQ82
Differential
GNDIO
GNDIO6
-
GNDIO6
-
AG6
LLM0_PLLCAP
6
LLM0_PLLCAP
6
AJ1
PL87A
6
T
PL104A
6
T
AJ2
PL87B
6
C
PL104B
6
C
AK2
TCK
-
TCK
-
AK1
TDI
-
TDI
-
AL1
TMS
-
TMS
AF10
TDO
-
TDO
-
AK3
VCCJ
-
VCCJ
-
LLC_SQ_VCCRX3
14
AN2
LLC_SQ_VCCRX3
14
AM2
LLC_SQ_HDINP3
14
AN1
LLC_SQ_VCCIB3
14
AM3
LLC_SQ_HDINN3
14
AN3
LLC_SQ_VCCTX3
14
AP2
LLC_SQ_HDOUTP3
14
AM1
LLC_SQ_VCCOB3
14
AP3
LLC_SQ_HDOUTN3
14
AN4
LLC_SQ_VCCTX2
14
AP4
LLC_SQ_HDOUTN2
14
AL3
LLC_SQ_VCCOB2
14
AP5
LLC_SQ_HDOUTP2
14
AN5
LLC_SQ_VCCRX2
14
AM4
LLC_SQ_HDINN2
14
AL4
LLC_SQ_VCCIB2
14
AM5
LLC_SQ_HDINP2
14
AL6
LLC_SQ_VCCP
14
T
C
T
C
C
T
C
T
LLC_SQ_HDINP3
14
LLC_SQ_VCCIB3
14
LLC_SQ_HDINN3
14
LLC_SQ_VCCTX3
14
LLC_SQ_HDOUTP3
14
LLC_SQ_VCCOB3
14
LLC_SQ_HDOUTN3
14
LLC_SQ_VCCTX2
14
LLC_SQ_HDOUTN2
14
LLC_SQ_VCCOB2
14
LLC_SQ_HDOUTP2
14
LLC_SQ_VCCRX2
14
LLC_SQ_HDINN2
14
LLC_SQ_VCCIB2
14
LLC_SQ_HDINP2
14
LLC_SQ_VCCP
14
T
C
T
C
C
T
C
T
AL5
LLC_SQ_REFCLKP
14
T
LLC_SQ_REFCLKP
14
T
AK5
LLC_SQ_REFCLKN
14
C
LLC_SQ_REFCLKN
14
C
AK6
LLC_SQ_VCCAUX33
14
AM6
LLC_SQ_HDINP1
14
AL8
LLC_SQ_VCCIB1
14
AM7
LLC_SQ_HDINN1
14
AN6
LLC_SQ_VCCRX1
14
AP6
LLC_SQ_HDOUTP1
14
AK7
LLC_SQ_VCCOB1
14
AP7
LLC_SQ_HDOUTN1
14
AN7
LLC_SQ_VCCTX1
14
AP8
LLC_SQ_HDOUTN0
14
T
C
T
C
C
4-235
LLC_SQ_VCCAUX33
14
LLC_SQ_HDINP1
14
LLC_SQ_VCCIB1
14
LLC_SQ_HDINN1
14
LLC_SQ_VCCRX1
14
LLC_SQ_HDOUTP1
14
LLC_SQ_VCCOB1
14
LLC_SQ_HDOUTN1
14
LLC_SQ_VCCTX1
14
LLC_SQ_HDOUTN0
14
T
C
T
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AL9
LLC_SQ_VCCOB0
14
AP9
LLC_SQ_HDOUTP0
14
AN8
LLC_SQ_VCCTX0
14
AM8
LLC_SQ_HDINN0
14
AN9
LLC_SQ_VCCIB0
14
AM9
LLC_SQ_HDINP0
14
AL7
LLC_SQ_VCCRX0
14
LFE2M100E/SE
Dual Function
Differential
T
C
T
Ball/Pad
Function
Bank
LLC_SQ_VCCOB0
14
LLC_SQ_HDOUTP0
14
LLC_SQ_VCCTX0
14
LLC_SQ_HDINN0
14
LLC_SQ_VCCIB0
14
LLC_SQ_HDINP0
14
LLC_SQ_VCCRX0
14
Dual Function
Differential
T
C
T
-
-
-
VCCIO5
5
AJ12
NC
-
PB32A
5
BDQ33
T
AH12
NC
-
PB32B
5
BDQ33
C
-
-
-
GNDIO5
-
-
-
-
VCCIO5
5
AL13
NC
-
PB36A
5
BDQ33
T
AK13
NC
-
PB36B
5
BDQ33
C
-
-
-
GNDIO5
-
AE14
NC
-
PB38A
5
BDQ42
T
AG13
NC
-
PB38B
5
BDQ42
C
AN14
PB30A
5
BDQ33
T
PB39A
5
BDQ42
T
AP14
PB30B
5
BDQ33
C
PB39B
5
BDQ42
C
AH14
PB31A
5
BDQ33
T
PB40A
5
BDQ42
T
AJ15
PB31B
5
BDQ33
C
PB40B
5
BDQ42
C
5
VCCIO
VCCIO5
5
VCCIO5
GNDIO
GNDIO5
-
GNDIO5
-
AL14
PB33A
5
BDQS33
T
PB42A
5
BDQS42
T
AM14
PB33B
5
BDQ33
C
PB42B
5
BDQ42
C
AF14
PB35A
5
BDQ33
T
PB44A
5
BDQ42
T
AF13
PB35B
5
BDQ33
C
PB44B
5
BDQ42
C
VCCIO
VCCIO5
5
VCCIO5
5
AE15
PB36A
5
BDQ33
T
PB45A
5
BDQ42
T
AG14
PB36B
5
BDQ33
C
PB45B
5
BDQ42
C
AH15
PB37A
5
BDQ33
T
PB46A
5
BDQ42
T
AK15
PB37B
5
BDQ33
C
PB46B
5
BDQ42
C
GNDIO
GNDIO5
-
GNDIO5
-
AL15
PB38A
5
BDQ42
T
PB47A
5
BDQ51
T
AM15
PB38B
5
BDQ42
C
PB47B
5
BDQ51
C
AK16
PB39A
5
BDQ42
T
PB48A
5
BDQ51
T
AJ16
PB39B
5
BDQ42
C
PB48B
5
BDQ51
C
BDQ42
T
BDQ51
T
AN15
PB40A
5
VCCIO
VCCIO5
5
PB49A
5
VCCIO5
5
AP15
PB40B
5
BDQ42
C
PB49B
5
BDQ51
C
AG15
PB42A
5
BDQS42
T
PB51A
5
BDQS51
T
GNDIO
GNDIO5
-
GNDIO5
-
AE16
PB42B
5
BDQ42
C
PB51B
5
BDQ51
C
AF15
PB44A
5
BDQ42
T
PB53A
5
BDQ51
T
VCCIO
VCCIO5
5
VCCIO5
5
AD16
PB44B
5
BDQ42
C
PB53B
5
BDQ51
C
AK17
PB45A
5
BDQ42
T
PB54A
5
BDQ51
T
AH16
PB45B
5
BDQ42
C
PB54B
5
BDQ51
C
BDQ42
T
BDQ51
T
BDQ51
C
AN16
PB46A
5
GNDIO
GNDIO5
-
AP16
PB46B
5
BDQ42
C
4-236
PB55A
5
GNDIO5
-
PB55B
5
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AL17
PB47A
5
BDQ51
Bank
Dual Function
T
PB56A
5
BDQ60
AM17
PB47B
5
BDQ51
T
C
PB56B
5
BDQ60
C
AN17
PB48A
5
BDQ51
T
PB57A
5
BDQ60
T
AP17
PB48B
5
BDQ51
C
PB57B
5
BDQ60
C
AD17
PB49A
5
BDQ51
T
PB58A
5
BDQ60
T
AE17
PB49B
5
BDQ51
C
PB58B
5
BDQ60
C
VCCIO
VCCIO5
5
VCCIO5
5
AL18
PB50A
5
BDQ51
T
PB59A
5
BDQ60
T
AM18
PB50B
5
BDQ51
C
PB59B
5
BDQ60
C
GNDIO
GNDIO5
-
GNDIO5
-
AP18
PB51A
5
BDQS51
T
PB60A
5
BDQS60
T
AN18
PB51B
5
BDQ51
C
PB60B
5
BDQ60
C
Differential
AG17
PB52A
5
VREF2_5/BDQ51
T
PB61A
5
VREF2_5/BDQ60
T
AJ17
PB52B
5
VREF1_5/BDQ51
C
PB61B
5
VREF1_5/BDQ60
C
AF17
PB53A
5
PCLKT5_0/BDQ51
T
PB62A
5
PCLKT5_0/BDQ60
T
AH17
PB53B
5
PCLKC5_0/BDQ51
C
PB62B
5
PCLKC5_0/BDQ60
C
5
PCLKT4_0/BDQ69
T
C
VCCIO
VCCIO5
5
VCCIO5
GNDIO
GNDIO5
-
GNDIO5
-
AF18
PB58A
4
PB67A
4
VCCIO
VCCIO4
4
VCCIO4
4
AD18
PB58B
4
PCLKC4_0/BDQ60
C
PB67B
4
PCLKC4_0/BDQ69
AP19
PB59A
4
VREF2_4/BDQ60
T
PB68A
4
VREF2_4/BDQ69
T
AN19
PB59B
4
VREF1_4/BDQ60
C
PB68B
4
VREF1_4/BDQ69
C
AP20
PB60A
4
BDQS60
T
PB69A
4
BDQS69
T
GNDIO
GNDIO4
-
GNDIO4
C
PCLKT4_0/BDQ60
T
AM20
PB60B
4
BDQ60
C
PB69B
4
BDQ69
AN20
PB61A
4
BDQ60
T
PB70A
4
BDQ69
T
AM21
PB61B
4
BDQ60
C
PB70B
4
BDQ69
C
BDQ60
T
BDQ69
T
C
AG18
PB62A
4
VCCIO
VCCIO4
4
PB71A
4
VCCIO4
4
AE18
PB62B
4
BDQ60
AJ18
PB63A
4
BDQ60
C
PB71B
4
BDQ69
T
PB72A
4
BDQ69
AH18
PB63B
4
T
BDQ60
C
PB72B
4
BDQ69
C
BDQ60
T
BDQ69
T
C
AK18
PB64A
4
GNDIO
GNDIO4
-
AK19
PB64B
4
BDQ60
AP21
PB65A
4
BDQ69
AN21
PB65B
4
BDQ69
PB73A
4
GNDIO4
-
C
PB73B
4
BDQ69
T
PB74A
4
BDQ78
T
C
PB74B
4
BDQ78
C
AL20
PB66A
4
BDQ69
T
PB75A
4
BDQ78
T
AK20
PB66B
4
BDQ69
C
PB75B
4
BDQ78
C
AN22
PB67A
4
BDQ69
T
PB76A
4
BDQ78
T
AL21
PB67B
4
BDQ69
C
PB76B
4
BDQ78
C
4
VCCIO
VCCIO4
4
VCCIO4
GNDIO
GNDIO4
-
GNDIO4
-
AH19
PB69A
4
BDQS69
T
PB78A
4
BDQS78
T
AJ20
PB69B
4
BDQ69
C
PB78B
4
BDQ78
C
AD20
PB71A
4
BDQ69
T
PB80A
4
BDQ78
T
AF20
PB71B
4
BDQ69
C
PB80B
4
BDQ78
C
VCCIO
VCCIO4
4
VCCIO4
4
AJ19
PB72A
4
BDQ69
T
PB81A
4
BDQ78
T
AH20
PB72B
4
BDQ69
C
PB81B
4
BDQ78
C
4-237
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AE20
PB73A
4
BDQ69
Bank
Dual Function
T
PB82A
4
BDQ78
AG20
PB73B
4
BDQ69
T
C
PB82B
4
BDQ78
C
GNDIO
GNDIO4
-
GNDIO4
-
AH22
NC
-
PB89A
4
-
-
-
VCCIO4
4
BDQ87
T
C
Differential
AH21
NC
-
PB89B
4
BDQ87
AG22
NC
-
PB90A
4
BDQ87
T
AG21
NC
-
PB90B
4
BDQ87
C
-
-
-
GNDIO4
-
AM22
PB74A
4
BDQ78
T
PB92A
4
BDQ96
T
AL22
PB74B
4
BDQ78
C
PB92B
4
BDQ96
C
VCCIO
VCCIO4
4
VCCIO4
4
AP23
PB77A
4
BDQ78
T
PB95A
4
BDQ96
T
AN23
PB77B
4
BDQ78
C
PB95B
4
BDQ96
C
GNDIO
GNDIO4
-
GNDIO4
-
AM24
PB78A
4
BDQS78
T
PB96A
4
BDQS96
T
AL24
PB78B
4
BDQ78
C
PB96B
4
BDQ96
C
AK22
PB79A
4
BDQ78
T
PB97A
4
BDQ96
T
AJ22
PB79B
4
BDQ78
C
PB97B
4
BDQ96
C
AL23
PB80A
4
BDQ78
T
PB98A
4
BDQ96
T
AK23
PB80B
4
BDQ78
C
PB98B
4
BDQ96
C
VCCIO
VCCIO4
4
VCCIO4
4
AJ23
PB81A
4
BDQ78
T
PB99A
4
BDQ96
T
AH23
PB81B
4
BDQ78
C
PB99B
4
BDQ96
C
GNDIO
GNDIO4
-
GNDIO4
-
AL28
LRC_SQ_VCCRX3
13
LRC_SQ_VCCRX3
13
AM26
LRC_SQ_HDINP3
13
AN26
LRC_SQ_VCCIB3
13
AM27
LRC_SQ_HDINN3
13
AN27
LRC_SQ_VCCTX3
13
AP26
LRC_SQ_HDOUTP3
13
AL26
LRC_SQ_VCCOB3
13
AP27
LRC_SQ_HDOUTN3
13
AN28
LRC_SQ_VCCTX2
13
AP28
LRC_SQ_HDOUTN2
13
AK28
LRC_SQ_VCCOB2
13
AP29
LRC_SQ_HDOUTP2
13
AN29
LRC_SQ_VCCRX2
13
AM28
LRC_SQ_HDINN2
13
AL27
LRC_SQ_VCCIB2
13
AM29
LRC_SQ_HDINP2
13
AL29
LRC_SQ_VCCP
13
T
C
T
C
C
T
C
T
LRC_SQ_HDINP3
13
LRC_SQ_VCCIB3
13
LRC_SQ_HDINN3
13
LRC_SQ_VCCTX3
13
LRC_SQ_HDOUTP3
13
LRC_SQ_VCCOB3
13
LRC_SQ_HDOUTN3
13
LRC_SQ_VCCTX2
13
LRC_SQ_HDOUTN2
13
LRC_SQ_VCCOB2
13
LRC_SQ_HDOUTP2
13
LRC_SQ_VCCRX2
13
LRC_SQ_HDINN2
13
LRC_SQ_VCCIB2
13
LRC_SQ_HDINP2
13
LRC_SQ_VCCP
13
T
C
T
C
C
T
C
T
AL30
LRC_SQ_REFCLKP
13
T
LRC_SQ_REFCLKP
13
T
AK30
LRC_SQ_REFCLKN
13
C
LRC_SQ_REFCLKN
13
C
LRC_SQ_VCCAUX33
13
AK29
LRC_SQ_VCCAUX33
13
AM30
LRC_SQ_HDINP1
13
AL31
LRC_SQ_VCCIB1
13
AM31
LRC_SQ_HDINN1
13
AN30
LRC_SQ_VCCRX1
13
AP30
LRC_SQ_HDOUTP1
13
AL32
LRC_SQ_VCCOB1
13
T
C
T
4-238
LRC_SQ_HDINP1
13
LRC_SQ_VCCIB1
13
LRC_SQ_HDINN1
13
LRC_SQ_VCCRX1
13
LRC_SQ_HDOUTP1
13
LRC_SQ_VCCOB1
13
T
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AP31
LRC_SQ_HDOUTN1
13
AN31
LRC_SQ_VCCTX1
13
AP32
LRC_SQ_HDOUTN0
13
AM34
LRC_SQ_VCCOB0
13
LFE2M100E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
C
LRC_SQ_HDOUTN1
13
LRC_SQ_VCCTX1
13
LRC_SQ_HDOUTN0
13
LRC_SQ_VCCOB0
13
LRC_SQ_HDOUTP0
13
LRC_SQ_VCCTX0
13
C
AP33
LRC_SQ_HDOUTP0
13
AN32
LRC_SQ_VCCTX0
13
T
AM32
LRC_SQ_HDINN0
13
AN34
LRC_SQ_VCCIB0
13
AM33
LRC_SQ_HDINP0
13
AN33
LRC_SQ_VCCRX0
13
AH28
CFG2
8
CFG2
8
AD24
CFG1
8
CFG1
8
AJ29
CFG0
8
CFG0
8
AF25
PROGRAMN
8
PROGRAMN
8
AJ28
CCLK
8
CCLK
8
AE25
INITN
8
INITN
8
8
C
T
LRC_SQ_HDINN0
13
LRC_SQ_VCCIB0
13
LRC_SQ_HDINP0
13
LRC_SQ_VCCRX0
13
AK31
DONE
8
DONE
GNDIO
GNDIO8
-
GNDIO8
-
AE24
WRITEN***
8
WRITEN***
8
AJ30
CS1N***
8
CS1N***
8
AD25
CSN***
8
CSN***
8
AG29
D0/SPIFASTN***
8
D0/SPIFASTN***
8
VCCIO
VCCIO8
8
VCCIO8
8
AG28
D1***
8
D1***
8
AG30
D2***
8
D2***
8
AH29
D3***
8
D3***
8
GNDIO
GNDIO8
-
GNDIO8
-
AF26
D4***
8
D4***
8
AH30
D5***
8
D5***
8
AE26
D6***
8
D6***
8
AJ31
D7***
8
D7***
8
VCCIO
VCCIO8
8
VCCIO8
8
AG27
DI/CSSPI0N***
8
DI/CSSPI0N***
8
AK32
DOUT/CSON/
CSSPI1N***
8
DOUT/CSON/
CSSPI1N***
8
AK33
BUSY/SISPI***
8
BUSY/SISPI***
8
AF27
RLM0_PLLCAP
3
RLM0_PLLCAP
3
AF28
PR85B
3
PR102B
3
GNDIO
GNDIO3
-
GNDIO3
-
AD26
PR85A
3
PR102A
RLM0_GDLLC_FB_A
RLM0_GDLLT_FB_A
C
T
Dual Function
Differential
C
C
T
C
T
RLM0_GDLLC_FB_A/RDQ99
C
3
RLM0_GDLLT_FB_A/RDQ99
T
C (LVDS)*
AJ32
PR84B
3
RLM0_GDLLC_IN_A**
C (LVDS)*
PR101B
3
RLM0_GDLLC_IN_A**/
RDQ99
AJ33
PR84A
3
RLM0_GDLLT_IN_A**
T (LVDS)*
PR101A
3
RLM0_GDLLT_IN_A**/
RDQ99
T (LVDS)*
AJ34
PR83B
3
RLM0_GPLLC_IN_A**
C
PR100B
3
RLM0_GPLLC_IN_A**/
RDQ99
C
VCCIO
VCCIO3
3
VCCIO3
3
AK34
PR83A
3
RLM0_GPLLT_IN_A**
T
PR100A
3
RLM0_GPLLT_IN_A**/
RDQ99
T
AH33
PR82B
3
RLM0_GPLLC_FB_A
C (LVDS)*
PR99B
3
RLM0_GPLLC_FB_A/RDQ99
C (LVDS)*
AH34
PR82A
3
RLM0_GPLLT_FB_A/RDQS82****
T (LVDS)*
PR99A
3
RLM0_GPLLT_FB_A/
RDQS99
T (LVDS)*
GNDIO
GNDIO3
-
GNDIO3
-
4-239
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
AF29
PR81B
3
RDQ82
Bank
Dual Function
Differential
C
PR98B
3
RDQ99
AF31
PR81A
3
C
RDQ82
T
PR98A
3
RDQ99
AG33
PR80B
T
3
RDQ82
C (LVDS)*
PR97B
3
RDQ99
C (LVDS)*
RDQ82
T (LVDS)*
RDQ99
T (LVDS)*
C
AG34
PR80A
3
VCCIO
VCCIO3
3
PR97A
3
VCCIO3
3
AF30
PR79B
3
RDQ82
AF32
PR79A
3
RDQ82
C
PR96B
3
RDQ99
T
PR96A
3
RDQ99
AE29
PR78B
3
T
RDQ82
C (LVDS)*
PR95B
3
RDQ99
C (LVDS)*
AE30
PR78A
3
AF33
NC
-
RDQ82
T (LVDS)*
PR95A
3
RDQ99
T (LVDS)*
PR93B
3
RDQ90
AF34
NC
C
-
PR93A
3
RDQ90
-
T
-
-
GNDIO3
-
AC27
NC
-
PR92B
3
RDQ90
C (LVDS)*
AC28
NC
-
PR92A
3
RDQ90
T (LVDS)*
AD29
NC
-
PR91B
3
RDQ90
C
AD30
NC
-
PR91A
3
RDQ90
T
-
-
-
VCCIO3
3
AE33
NC
-
PR90B
3
RDQ90
C (LVDS)*
AE34
NC
-
PR90A
3
RDQS90
T (LVDS)*
AD32
NC
-
PR89B
3
RDQ90
C
-
-
-
GNDIO3
-
AD31
NC
-
PR89A
3
RDQ90
T
AB25
NC
-
PR88B
3
RDQ90
C (LVDS)*
AC25
NC
-
PR88A
3
RDQ90
T (LVDS)*
AB28
NC
-
PR87B
3
RDQ90
C
-
-
-
VCCIO3
3
AA26
NC
-
PR87A
3
RDQ90
T
AD33
NC
-
PR86B
3
RDQ90
C (LVDS)*
AD34
NC
-
AC29
PR76B
3
GNDIO
GNDIO3
-
RDQ73
C
PR86A
3
RDQ90
T (LVDS)*
PR84B
3
RDQ81
C
GNDIO3
-
AA27
PR76A
3
RDQ73
T
PR84A
3
RDQ81
T
AC32
PR75B
3
RDQ73
C (LVDS)*
PR83B
3
RDQ81
C (LVDS)*
AC31
PR75A
3
RDQ73
T (LVDS)*
PR83A
3
RDQ81
T (LVDS)*
AA25
PR74B
3
RDQ73
C
PR82B
3
RDQ81
C
VCCIO
VCCIO3
3
VCCIO3
3
AC24
PR74A
3
RDQ73
T
PR82A
3
RDQ81
T
AC33
PR73B
3
RDQ73
C (LVDS)*
PR81B
3
RDQ81
C (LVDS)*
RDQS73
T (LVDS)*
RDQS81
T (LVDS)*
C
AC34
PR73A
3
GNDIO
GNDIO3
-
AB24
PR72B
3
RDQ73
Y26
PR72A
3
RDQ73
AB33
PR71B
3
AB34
PR71A
3
VCCIO
VCCIO3
3
PR81A
3
GNDIO3
-
C
PR80B
3
RDQ81
T
PR80A
3
RDQ81
T
RDQ73
C (LVDS)*
PR79B
3
RDQ81
C (LVDS)*
RDQ73
T (LVDS)*
PR79A
3
RDQ81
T (LVDS)*
VCCIO3
3
C
Y27
PR70B
3
RDQ73
C
PR78B
3
RDQ81
AB29
PR70A
3
RDQ73
T
PR78A
3
RDQ81
T
AA34
PR69B
3
RDQ73
C (LVDS)*
PR77B
3
RDQ81
C (LVDS)*
AA33
PR69A
3
RDQ73
T (LVDS)*
PR77A
3
RDQ81
T (LVDS)*
AA31
PR67B
3
RDQ64
C
PR75B
3
RDQ72
C
AA32
PR67A
3
RDQ64
T
PR75A
3
RDQ72
T
4-240
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Ball/Pad
Function
Bank
GNDIO
GNDIO3
-
Bank
GNDIO3
-
AA28
PR66B
3
RDQ64
AA29
PR66A
3
RDQ64
C (LVDS)*
PR74B
T (LVDS)*
PR74A
AA30
PR65B
3
RDQ64
C
AB30
PR65A
3
RDQ64
T
VCCIO
VCCIO3
3
Y28
PR64B
3
RDQ64
Y29
PR64A
3
RDQS64
AA24
PR63B
3
RDQ64
GNDIO
GNDIO3
-
Y25
PR63A
3
RDQ64
T
PR71A
3
RDQ72
T
Y31
PR62B
3
RDQ64
C (LVDS)*
PR70B
3
RDQ72
C (LVDS)*
Y30
PR62A
3
RDQ64
T (LVDS)*
PR70A
3
RDQ72
T (LVDS)*
Y24
PR61B
3
RDQ64
C
PR69B
3
RDQ72
C
VCCIO
VCCIO3
3
VCCIO3
3
W25
PR61A
3
RDQ64
T
PR69A
3
RDQ72
T
Y33
PR60B
3
RDQ64
C (LVDS)*
PR68B
3
RDQ72
C (LVDS)*
Dual Function
Differential
Dual Function
Differential
3
RDQ72
C (LVDS)*
3
RDQ72
T (LVDS)*
PR73B
3
RDQ72
C
PR73A
3
RDQ72
T
VCCIO3
3
C (LVDS)*
PR72B
3
RDQ72
C (LVDS)*
T (LVDS)*
PR72A
3
RDQS72
T (LVDS)*
C
PR71B
3
RDQ72
C
GNDIO3
-
Y34
PR60A
3
RDQ64
T (LVDS)*
PR68A
3
RDQ72
T (LVDS)*
W28
PR58B
3
RLM3_SPLLC_FB_A/RDQ55
C
PR66B
3
RLM4_SPLLC_FB_A/RDQ63
C
GNDIO
GNDIO3
-
GNDIO3
-
V26
PR58A
3
RLM3_SPLLT_FB_A/RDQ55
T
PR66A
3
RLM4_SPLLT_FB_A/RDQ63
T
V28
PR57B
3
RLM3_SPLLC_IN_A/RDQ55
C (LVDS)*
PR65B
3
RLM4_SPLLC_IN_A/RDQ63
C (LVDS)*
V27
PR57A
3
RLM3_SPLLT_IN_A/RDQ55
T (LVDS)*
PR65A
3
RLM4_SPLLT_IN_A/RDQ63
T (LVDS)*
V25
PR56B
3
RDQ55
C
PR64B
3
RDQ63
C
VCCIO
VCCIO3
3
VCCIO3
3
W24
PR56A
3
RDQ55
T
PR64A
3
RDQ63
T
W33
PR55B
3
RDQ55
C (LVDS)*
PR63B
3
RDQ63
C (LVDS)*
W34
PR55A
3
RDQS55
T (LVDS)*
PR63A
3
RDQS63
T (LVDS)*
GNDIO
GNDIO3
-
GNDIO3
C
V24
PR54B
3
RDQ55
C
PR62B
3
RDQ63
U26
PR54A
3
RDQ55
T
PR62A
3
RDQ63
T
W29
PR53B
3
RDQ55
C (LVDS)*
PR61B
3
RDQ63
C (LVDS)*
RDQ55
T (LVDS)*
RDQ63
T (LVDS)*
C
W30
PR53A
3
VCCIO
VCCIO3
3
PR61A
3
VCCIO3
3
U27
PR52B
3
VREF2_3/RDQ55
V29
PR52A
3
VREF1_3/RDQ55
C
PR60B
3
VREF2_3/RDQ63
T
PR60A
3
VREF1_3/RDQ63
V31
PR51B
3
T
PCLKC3_0/RDQ55
C (LVDS)*
PR59B
3
PCLKC3_0/RDQ63
C (LVDS)*
V32
PR51A
3
PCLKT3_0/RDQ55
T (LVDS)*
PR59A
3
PCLKT3_0/RDQ63
T (LVDS)*
V33
PR49B
2
PCLKC2_0/RDQ46
C
PR57B
2
PCLKC2_0/RDQ54
C
V34
PR49A
2
PCLKT2_0/RDQ46
T
PR57A
2
PCLKT2_0/RDQ54
T
GNDIO
GNDIO2
-
GNDIO2
-
U24
PR48B
2
RDQ46
C (LVDS)*
PR56B
2
RDQ54
C (LVDS)*
U25
PR48A
2
RDQ46
T (LVDS)*
PR56A
2
RDQ54
T (LVDS)*
V30
PR47B
2
RDQ46
C
PR55B
2
RDQ54
C
Y32
PR47A
2
RDQ46
T
PR55A
2
RDQ54
T
VCCIO
VCCIO2
2
VCCIO2
2
U28
PR46B
2
RDQ46
C (LVDS)*
PR54B
2
RDQ54
C (LVDS)*
U29
PR46A
2
RDQS46
T (LVDS)*
PR54A
2
RDQS54
T (LVDS)*
U33
PR45B
2
RDQ46
C
PR53B
2
RDQ54
C
GNDIO
GNDIO2
-
GNDIO2
-
U34
PR45A
2
PR53A
2
RDQ54
T
RDQ46
T
4-241
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
T30
PR44B
2
RDQ46
Bank
Dual Function
Differential
C (LVDS)*
PR52B
2
RDQ54
U30
PR44A
2
C (LVDS)*
RDQ46
T (LVDS)*
PR52A
2
RDQ54
T29
PR43B
2
T (LVDS)*
RUM3_SPLLC_FB_A/RDQ46
C
PR51B
2
RUM3_SPLLC_FB_A/RDQ54
VCCIO
VCCIO2
2
C
VCCIO2
2
T28
PR43A
2
RUM3_SPLLT_FB_A/RDQ46
T
PR51A
2
RUM3_SPLLT_FB_A/RDQ54
T
U31
PR42B
2
RUM3_SPLLC_IN_A/RDQ46
C (LVDS)*
PR50B
2
RUM3_SPLLC_IN_A/RDQ54
C (LVDS)*
U32
PR42A
2
RUM3_SPLLT_IN_A/RDQ46
T (LVDS)*
PR50A
2
RUM3_SPLLT_IN_A/RDQ54
T (LVDS)*
T33
PR40B
2
RDQ37
C
PR48B
2
RDQ45
C
T34
PR40A
2
RDQ37
T
PR48A
2
RDQ45
T
GNDIO
GNDIO2
-
GNDIO2
-
R27
PR39B
2
RDQ37
C (LVDS)*
PR47B
2
RDQ45
C (LVDS)*
R28
PR39A
2
RDQ37
T (LVDS)*
PR47A
2
RDQ45
T (LVDS)*
R29
PR38B
2
RDQ37
C
PR46B
2
RDQ45
C
R30
PR38A
2
RDQ37
T
PR46A
2
RDQ45
T
VCCIO
VCCIO2
2
VCCIO2
2
R33
PR37B
2
RDQ37
C (LVDS)*
PR45B
2
RDQ45
C (LVDS)*
R34
PR37A
2
RDQS37
T (LVDS)*
PR45A
2
RDQS45
T (LVDS)*
R32
PR36B
2
RDQ37
C
PR44B
2
RDQ45
C
GNDIO
GNDIO2
-
GNDIO2
-
R31
PR36A
2
RDQ37
T
PR44A
2
RDQ45
T
P34
PR35B
2
RDQ37
C (LVDS)*
PR43B
2
RDQ45
C (LVDS)*
P33
PR35A
2
RDQ37
T (LVDS)*
PR43A
2
RDQ45
T (LVDS)*
R26
PR34B
2
RDQ37
C
PR42B
2
RDQ45
C
VCCIO
VCCIO2
2
VCCIO2
2
T25
PR34A
2
RDQ37
T
PR42A
2
RDQ45
T
P28
PR33B
2
RDQ37
C (LVDS)*
PR41B
2
RDQ45
C (LVDS)*
P27
PR33A
2
RDQ37
T (LVDS)*
PR41A
2
RDQ45
T (LVDS)*
P30
NC
-
PR40B
2
-
-
-
GNDIO2
-
C
P29
NC
-
PR40A
2
T
P31
NC
-
PR39B
2
C (LVDS)*
P32
NC
-
PR39A
2
T (LVDS)*
R25
NC
-
PR38B
2
C
-
-
-
VCCIO2
2
T24
NC
-
PR38A
2
T
N34
NC
-
PR37B
2
C (LVDS)*
T (LVDS)*
N33
NC
-
PR37A
2
GNDIO
GNDIO2
-
GNDIO2
-
M34
PR31B
2
RDQ28
C
PR35B
2
RDQ32
C
M33
PR31A
2
RDQ28
T
PR35A
2
RDQ32
T
-
-
-
GNDIO2
-
R24
PR30B
2
RDQ28
C (LVDS)*
PR34B
2
RDQ32
C (LVDS)*
P24
PR30A
2
RDQ28
T (LVDS)*
PR34A
2
RDQ32
T (LVDS)*
N30
PR29B
2
RDQ28
C
PR33B
2
RDQ32
C
M29
PR29A
2
RDQ28
T
PR33A
2
RDQ32
T
VCCIO
VCCIO2
2
VCCIO2
2
N28
PR28B
2
RDQ28
C (LVDS)*
PR32B
2
RDQ32
C (LVDS)*
N29
PR28A
2
RDQS28
T (LVDS)*
PR32A
2
RDQS32
T (LVDS)*
N24
PR27B
2
RDQ28
C
PR31B
2
RDQ32
C
GNDIO
GNDIO2
-
GNDIO2
-
N25
PR27A
2
PR31A
2
RDQ32
T
RDQ28
T
4-242
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
LFE2M100E/SE
Ball
Number
Ball/Pad
Function
Differential
Ball/Pad
Function
Bank
Dual Function
M28
PR26B
2
RDQ28
Bank
Dual Function
Differential
C (LVDS)*
PR30B
2
RDQ32
M27
PR26A
2
C (LVDS)*
RDQ28
T (LVDS)*
PR30A
2
RDQ32
L27
PR25B
2
T (LVDS)*
RDQ28
C
PR29B
2
RDQ32
VCCIO
VCCIO2
2
C
VCCIO2
2
M26
PR25A
2
RDQ28
T
PR29A
2
RDQ32
T
M32
PR24B
2
RDQ28
C (LVDS)*
PR28B
2
RDQ32
C (LVDS)*
M31
PR24A
2
RDQ28
T (LVDS)*
PR28A
2
RDQ32
T (LVDS)*
GNDIO
GNDIO2
-
GNDIO2
-
C
-
-
-
VCCIO2
2
L34
PR22B
2
C
PR22B
2
RDQ23
L33
PR22A
2
T
PR22A
2
RDQ23
T
L32
PR21B
2
C (LVDS)*
PR21B
2
RDQ23
C (LVDS)*
T (LVDS)*
RDQ23
T (LVDS)*
C
L31
PR21A
2
VCCIO
VCCIO2
2
L28
PR20B
2
L29
PR20A
2
M30
PR19B
2
PR21A
2
VCCIO2
2
C
PR20B
2
RDQ23
T
PR20A
2
RDQ23
T
C (LVDS)*
PR19B
2
RDQ23
C (LVDS)*
L30
PR19A
2
T (LVDS)*
PR19A
2
RDQ23
T (LVDS)*
K34
PR18B
2
RDQ15
C
PR18B
2
RDQ15
C
K33
PR18A
2
RDQ15
T
PR18A
2
RDQ15
T
GNDIO
GNDIO2
-
GNDIO2
-
K30
PR17B
2
RDQ15
C (LVDS)*
PR17B
2
RDQ15
C (LVDS)*
K29
PR17A
2
RDQ15
T (LVDS)*
PR17A
2
RDQ15
T (LVDS)*
J34
PR16B
2
RDQ15
C
PR16B
2
RDQ15
C
J33
PR16A
2
RDQ15
T
PR16A
2
RDQ15
T
VCCIO
VCCIO2
2
VCCIO2
2
J32
PR15B
2
RDQ15
C (LVDS)*
PR15B
2
RDQ15
C (LVDS)*
J31
PR15A
2
RDQS15
T (LVDS)*
PR15A
2
RDQS15
T (LVDS)*
H33
PR14B
2
RDQ15
C
PR14B
2
RDQ15
C
GNDIO
GNDIO2
-
GNDIO2
-
H34
PR14A
2
RDQ15
T
PR14A
2
RDQ15
T
J30
PR13B
2
RDQ15
C (LVDS)*
PR13B
2
RDQ15
C (LVDS)*
RDQ15
T (LVDS)*
RDQ15
T (LVDS)*
J29
PR13A
2
VCCIO
VCCIO2
2
J27
PR11B
2
RUM0_SPLLC_IN_A/RDQ15
J28
PR11A
2
RUM0_SPLLT_IN_A/RDQ15
H31
PR9B
2
VREF2_2
GNDIO
GNDIO2
-
H32
PR9A
2
VCCIO
VCCIO2
2
VREF1_2
PR13A
2
VCCIO2
2
C (LVDS)*
PR11B
2
RUM0_SPLLC_IN_A/RDQ15
C (LVDS)*
T (LVDS)*
PR11A
2
RUM0_SPLLT_IN_A/RDQ15
T (LVDS)*
C
PR9B
2
VREF2_2
C
GNDIO2
VREF1_2
T
T
PR9A
2
VCCIO2
2
H30
XRES
1
XRES
1
B33
URC_SQ_VCCRX0
12
URC_SQ_VCCRX0
12
C33
URC_SQ_HDINP0
12
URC_SQ_HDINP0
12
B34
URC_SQ_VCCIB0
12
URC_SQ_VCCIB0
12
C32
URC_SQ_HDINN0
12
B32
URC_SQ_VCCTX0
12
A33
URC_SQ_HDOUTP0
12
C34
URC_SQ_VCCOB0
12
A32
URC_SQ_HDOUTN0
12
B31
URC_SQ_VCCTX1
12
A31
URC_SQ_HDOUTN1
12
T
C
T
C
C
4-243
URC_SQ_HDINN0
12
URC_SQ_VCCTX0
12
URC_SQ_HDOUTP0
12
URC_SQ_VCCOB0
12
URC_SQ_HDOUTN0
12
URC_SQ_VCCTX1
12
URC_SQ_HDOUTN1
12
T
C
T
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
D32
URC_SQ_VCCOB1
12
A30
URC_SQ_HDOUTP1
12
B30
URC_SQ_VCCRX1
12
C31
URC_SQ_HDINN1
12
D31
URC_SQ_VCCIB1
12
C30
URC_SQ_HDINP1
12
E29
URC_SQ_VCCAUX33
12
LFE2M100E/SE
Dual Function
Differential
T
C
T
Ball/Pad
Function
Bank
URC_SQ_VCCOB1
12
URC_SQ_HDOUTP1
12
URC_SQ_VCCRX1
12
URC_SQ_HDINN1
12
URC_SQ_VCCIB1
12
URC_SQ_HDINP1
12
URC_SQ_VCCAUX33
12
Dual Function
Differential
T
C
T
E30
URC_SQ_REFCLKN
12
C
URC_SQ_REFCLKN
12
C
D30
URC_SQ_REFCLKP
12
T
URC_SQ_REFCLKP
12
T
D29
URC_SQ_VCCP
12
URC_SQ_VCCP
12
C29
URC_SQ_HDINP2
12
D27
URC_SQ_VCCIB2
12
C28
URC_SQ_HDINN2
12
B29
URC_SQ_VCCRX2
12
A29
URC_SQ_HDOUTP2
12
E28
URC_SQ_VCCOB2
12
A28
URC_SQ_HDOUTN2
12
B28
URC_SQ_VCCTX2
12
A27
URC_SQ_HDOUTN3
12
D26
URC_SQ_VCCOB3
12
A26
URC_SQ_HDOUTP3
12
B27
URC_SQ_VCCTX3
12
C27
URC_SQ_HDINN3
12
B26
URC_SQ_VCCIB3
12
C26
URC_SQ_HDINP3
12
D28
URC_SQ_VCCRX3
12
E23
PT82B
1
GNDIO
GNDIO1
-
F23
PT82A
1
F24
NC
-
G23
NC
-
D23
PT80B
1
VCCIO
VCCIO1
1
D22
PT80A
1
-
-
-
T
C
T
C
C
T
C
T
C
T
C
T
URC_SQ_HDINP2
12
URC_SQ_VCCIB2
12
URC_SQ_HDINN2
12
URC_SQ_VCCRX2
12
URC_SQ_HDOUTP2
12
URC_SQ_VCCOB2
12
URC_SQ_HDOUTN2
12
URC_SQ_VCCTX2
12
URC_SQ_HDOUTN3
12
URC_SQ_VCCOB3
12
URC_SQ_HDOUTP3
12
URC_SQ_VCCTX3
12
URC_SQ_HDINN3
12
URC_SQ_VCCIB3
12
URC_SQ_HDINP3
12
URC_SQ_VCCRX3
12
PT100B
1
GNDIO1
-
T
C
T
C
C
T
C
T
C
PT100A
1
T
PT99B
1
C
PT99A
1
T
PT98B
1
C
VCCIO1
1
PT98A
1
GNDIO1
-
T
-
-
-
VCCIO1
1
C21
PT79B
1
C
PT88B
1
C
D21
PT79A
1
T
PT88A
1
T
GNDIO
GNDIO1
-
GNDIO1
-
B21
PT77B
1
C
PT86B
1
A21
PT77A
1
T
PT86A
1
T
F22
PT76B
1
C
PT85B
1
C
T
PT85A
1
T
VCCIO1
1
C
E22
PT76A
1
VCCIO
VCCIO1
1
GNDIO
GNDIO1
-
-
-
J22
NC
-
PT84B
1
C
G22
NC
-
PT84A
1
T
-
-
-
GNDIO1
-
H22
PT72B
1
C
PT81B
1
K22
PT72A
1
T
PT81A
1
T
G21
PT71B
1
C
PT80B
1
C
4-244
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
VCCIO
VCCIO1
1
J21
PT71A
1
H21
NC
-
K21
NC
-
D20
PT69B
1
LFE2M100E/SE
Dual Function
Differential
T
Ball/Pad
Function
Bank
VCCIO1
1
PT80A
1
T
PT79B
1
C
Dual Function
Differential
PT79A
1
T
C
PT78B
1
C
F20
PT69A
1
T
PT78A
1
T
C20
PT68B
1
C
PT77B
1
C
GNDIO
GNDIO1
-
GNDIO1
-
E20
PT68A
1
T
PT77A
1
T
G20
PT67B
1
C
PT76B
1
C
VCCIO
VCCIO1
1
VCCIO1
1
J20
PT67A
1
T
PT76A
1
T
A20
PT66B
1
C
PT75B
1
C
T
T
B20
PT66A
1
GNDIO
GNDIO1
-
PT75A
1
GNDIO1
-
A19
PT63B
1
B19
PT63A
1
C
PT72B
1
T
PT72A
1
K20
PT62B
T
1
C
PT71B
1
C
T
T
C
H20
PT62A
1
PT71A
1
VCCIO
VCCIO1
1
VCCIO1
1
L19
NC
-
PT70B
1
L20
NC
-
PT70A
1
T
E19
PT60B
1
C
PT69B
1
C
T
T
C18
PT60A
1
GNDIO
GNDIO1
-
PT69A
1
GNDIO1
-
C
F19
PT59B
1
C
PT68B
1
D18
PT59A
1
T
PT68A
1
C
T
L18
NC
-
PT67B
1
C
T
K19
NC
-
PT67A
1
VCCIO
VCCIO1
1
VCCIO1
1
A18
PT57B
1
VREF2_1
C
PT66B
1
VREF2_1
B18
PT57A
1
VREF1_1
T
PT66A
1
VREF1_1
T
G18
PT56B
1
PCLKC1_0
C
PT65B
1
PCLKC1_0
C
E18
PT56A
1
PCLKT1_0
T
PT65A
1
PCLKT1_0
T
F18
PT55B
0
PCLKC0_0
C
PT64B
0
PCLKC0_0
C
GNDIO
GNDIO0
-
GNDIO0
-
G19
PT55A
0
PCLKT0_0
T
PT64A
0
PCLKT0_0
T
H18
PT54B
0
VREF2_0
C
PT63B
0
VREF2_0
C
VREF1_0
T
VREF1_0
T
K18
PT54A
0
VCCIO
VCCIO0
0
PT63A
0
VCCIO0
0
C
J18
PT53B
0
C
PT60B
0
L17
PT53A
0
T
PT60A
0
C
T
G17
PT52B
0
C
PT59B
0
C
-
-
-
GNDIO0
-
J17
PT52A
0
T
PT59A
0
T
H17
PT51B
0
C
PT58B
0
C
-
-
-
VCCIO0
0
K17
PT51A
0
T
PT58A
0
T
B17
PT50B
0
C
PT57B
0
C
GNDIO
GNDIO0
-
-
-
A17
PT50A
0
T
PT57A
0
4-245
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
D17
PT49B
0
VCCIO
VCCIO0
0
LFE2M100E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
C
PT56B
0
-
-
Dual Function
Differential
C
F17
PT49A
0
T
PT56A
0
T
B16
PT48B
0
C
PT55B
0
C
A16
PT48A
0
T
T
-
-
-
PT55A
0
GNDIO0
-
VCCIO0
0
-
-
-
E17
PT47B
0
C
PT52B
0
C17
PT47A
0
T
PT52A
0
T
K16
PT46B
0
C
PT51B
0
C
T
T
J15
PT46A
0
GNDIO
GNDIO0
-
G16
PT45B
0
H15
PT45A
0
A15
PT44B
C
PT51A
0
GNDIO0
-
C
PT50B
0
T
PT50A
0
T
0
C
PT49B
0
C
T
T
B15
PT44A
0
VCCIO
VCCIO0
0
PT49A
0
VCCIO0
0
C
L16
PT43B
0
C
PT48B
0
K15
PT43A
0
T
PT48A
0
T
F16
PT42B
0
C
PT47B
0
C
E16
PT42A
0
T
PT47A
0
T
E15
PT41B
0
C
PT46B
0
C
GNDIO
GNDIO0
-
G15
PT41A
0
J14
NC
-
T
C
GNDIO0
-
PT46A
0
T
PT45B
0
C
L15
NC
-
PT45A
0
T
H14
NC
-
PT44B
0
C
VCCIO
VCCIO0
0
VCCIO0
0
K14
NC
-
PT44A
0
T
F15
PT38B
0
C
PT42B
0
C
G14
PT38A
0
T
PT42A
0
T
C15
PT37B
0
C
PT41B
0
C
GNDIO
GNDIO0
-
GNDIO0
-
D14
PT37A
0
T
PT41A
0
T
G13
PT36B
0
C
PT40B
0
C
-
-
-
VCCIO0
0
J13
PT36A
0
T
PT40A
0
T
B14
PT35B
0
C
PT39B
0
C
VCCIO
VCCIO0
0
-
-
A14
PT35A
0
T
PT39A
0
T
F13
PT34B
0
C
PT38B
0
C
H13
PT34A
0
T
PT38A
0
T
D13
PT33B
0
C
PT37B
0
C
C14
PT33A
0
T
PT37A
0
T
GNDIO
GNDIO0
-
GNDIO0
-
E13
PT32B
0
C
PT32B
0
D12
PT32A
0
T
PT32A
0
T
G12
PT31B
0
C
PT31B
0
C
T
T
E12
PT31A
0
PT31A
0
VCCIO
VCCIO0
0
VCCIO0
0
F12
NC
-
PT30B
0
4-246
C
C
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
D11
NC
F11
NC
LFE2M100E/SE
Ball/Pad
Function
Bank
-
PT30A
0
T
-
PT29B
0
C
T
Dual Function
Differential
E11
NC
-
PT29A
0
D7
ULC_SQ_VCCRX0
11
ULC_SQ_VCCRX0
11
C9
ULC_SQ_HDINP0
11
ULC_SQ_HDINP0
11
B9
ULC_SQ_VCCIB0
11
ULC_SQ_VCCIB0
11
C8
ULC_SQ_HDINN0
11
B8
ULC_SQ_VCCTX0
11
A9
ULC_SQ_HDOUTP0
11
D9
ULC_SQ_VCCOB0
11
A8
ULC_SQ_HDOUTN0
11
B7
ULC_SQ_VCCTX1
11
A7
ULC_SQ_HDOUTN1
11
E7
ULC_SQ_VCCOB1
11
A6
ULC_SQ_HDOUTP1
11
B6
ULC_SQ_VCCRX1
11
C7
ULC_SQ_HDINN1
11
D8
ULC_SQ_VCCIB1
11
C6
ULC_SQ_HDINP1
11
E6
ULC_SQ_VCCAUX33
11
T
C
T
C
C
T
C
T
ULC_SQ_HDINN0
11
ULC_SQ_VCCTX0
11
ULC_SQ_HDOUTP0
11
ULC_SQ_VCCOB0
11
ULC_SQ_HDOUTN0
11
ULC_SQ_VCCTX1
11
ULC_SQ_HDOUTN1
11
ULC_SQ_VCCOB1
11
ULC_SQ_HDOUTP1
11
ULC_SQ_VCCRX1
11
ULC_SQ_HDINN1
11
ULC_SQ_VCCIB1
11
ULC_SQ_HDINP1
11
ULC_SQ_VCCAUX33
11
Dual Function
Differential
T
C
T
C
C
T
C
T
E5
ULC_SQ_REFCLKN
11
C
ULC_SQ_REFCLKN
11
C
D5
ULC_SQ_REFCLKP
11
T
ULC_SQ_REFCLKP
11
T
D6
ULC_SQ_VCCP
11
ULC_SQ_VCCP
11
C5
ULC_SQ_HDINP2
11
ULC_SQ_HDINP2
11
D4
ULC_SQ_VCCIB2
11
ULC_SQ_VCCIB2
11
C4
ULC_SQ_HDINN2
11
B5
ULC_SQ_VCCRX2
11
A5
ULC_SQ_HDOUTP2
11
D3
ULC_SQ_VCCOB2
11
A4
ULC_SQ_HDOUTN2
11
B4
ULC_SQ_VCCTX2
11
T
C
T
C
C
ULC_SQ_HDINN2
11
ULC_SQ_VCCRX2
11
ULC_SQ_HDOUTP2
11
ULC_SQ_VCCOB2
11
ULC_SQ_HDOUTN2
11
ULC_SQ_VCCTX2
11
ULC_SQ_HDOUTN3
11
ULC_SQ_VCCOB3
11
ULC_SQ_HDOUTP3
11
ULC_SQ_VCCTX3
11
ULC_SQ_HDINN3
11
ULC_SQ_VCCIB3
11
A3
ULC_SQ_HDOUTN3
11
C1
ULC_SQ_VCCOB3
11
A2
ULC_SQ_HDOUTP3
11
B3
ULC_SQ_VCCTX3
11
C3
ULC_SQ_HDINN3
11
B1
ULC_SQ_VCCIB3
11
C2
ULC_SQ_HDINP3
11
ULC_SQ_HDINP3
11
B2
ULC_SQ_VCCRX3
11
ULC_SQ_VCCRX3
11
AA13
VCC
-
VCC
-
AA14
VCC
-
VCC
-
AA15
VCC
-
VCC
-
AA16
VCC
-
VCC
-
AA17
VCC
-
VCC
-
AA18
VCC
-
VCC
-
AA19
VCC
-
VCC
-
AA20
VCC
-
VCC
-
AA21
VCC
-
VCC
-
AA22
VCC
-
VCC
-
AB14
VCC
-
VCC
-
AB15
VCC
-
VCC
-
T
C
T
4-247
T
C
T
C
C
T
C
T
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AB20
VCC
AB21
N14
LFE2M100E/SE
Ball/Pad
Function
Bank
-
VCC
-
VCC
-
VCC
-
VCC
-
VCC
-
N15
VCC
-
VCC
-
N20
VCC
-
VCC
-
N21
VCC
-
VCC
-
P13
VCC
-
VCC
-
P14
VCC
-
VCC
-
P15
VCC
-
VCC
-
P16
VCC
-
VCC
-
P17
VCC
-
VCC
-
P18
VCC
-
VCC
-
P19
VCC
-
VCC
-
P20
VCC
-
VCC
-
P21
VCC
-
VCC
-
P22
VCC
-
VCC
-
R13
VCC
-
VCC
-
R14
VCC
-
VCC
-
R21
VCC
-
VCC
-
R22
VCC
-
VCC
-
T14
VCC
-
VCC
-
T21
VCC
-
VCC
-
U14
VCC
-
VCC
-
U21
VCC
-
VCC
-
V14
VCC
-
VCC
-
V21
VCC
-
VCC
-
W14
VCC
-
VCC
-
W21
VCC
-
VCC
-
Y13
VCC
-
VCC
-
Y14
VCC
-
VCC
-
Y21
VCC
-
VCC
-
Y22
VCC
-
VCC
-
C12
VCCIO0
0
VCCIO0
0
C16
VCCIO0
0
VCCIO0
0
E14
VCCIO0
0
VCCIO0
0
H12
VCCIO0
0
VCCIO0
0
H16
VCCIO0
0
VCCIO0
0
M14
VCCIO0
0
VCCIO0
0
M15
VCCIO0
0
VCCIO0
0
C19
VCCIO1
1
VCCIO1
1
C23
VCCIO1
1
VCCIO1
1
E21
VCCIO1
1
VCCIO1
1
H19
VCCIO1
1
VCCIO1
1
H23
VCCIO1
1
VCCIO1
1
M20
VCCIO1
1
VCCIO1
1
M21
VCCIO1
1
VCCIO1
1
G32
VCCIO2
2
VCCIO2
2
K28
VCCIO2
2
VCCIO2
2
K32
VCCIO2
2
VCCIO2
2
N27
VCCIO2
2
VCCIO2
2
N32
VCCIO2
2
VCCIO2
2
Dual Function
Differential
4-248
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
P23
VCCIO2
2
LFE2M100E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
VCCIO2
2
R23
VCCIO2
2
VCCIO2
2
T27
VCCIO2
2
VCCIO2
2
T32
VCCIO2
2
VCCIO2
2
AA23
VCCIO3
3
VCCIO3
3
AB27
VCCIO3
3
VCCIO3
3
AB32
VCCIO3
3
VCCIO3
3
AE28
VCCIO3
3
VCCIO3
3
AE32
VCCIO3
3
VCCIO3
3
AH32
VCCIO3
3
VCCIO3
3
W27
VCCIO3
3
VCCIO3
3
W32
VCCIO3
3
VCCIO3
3
Y23
VCCIO3
3
VCCIO3
3
AC20
VCCIO4
4
VCCIO4
4
AC21
VCCIO4
4
VCCIO4
4
AG19
VCCIO4
4
VCCIO4
4
AG23
VCCIO4
4
VCCIO4
4
AK21
VCCIO4
4
VCCIO4
4
AM19
VCCIO4
4
VCCIO4
4
AM23
VCCIO4
4
VCCIO4
4
AC14
VCCIO5
5
VCCIO5
5
AC15
VCCIO5
5
VCCIO5
5
AG12
VCCIO5
5
VCCIO5
5
AG16
VCCIO5
5
VCCIO5
5
AK14
VCCIO5
5
VCCIO5
5
AM12
VCCIO5
5
VCCIO5
5
AM16
VCCIO5
5
VCCIO5
5
AA12
VCCIO6
6
VCCIO6
6
AB3
VCCIO6
6
VCCIO6
6
AB8
VCCIO6
6
VCCIO6
6
AE3
VCCIO6
6
VCCIO6
6
AE7
VCCIO6
6
VCCIO6
6
AH3
VCCIO6
6
VCCIO6
6
W3
VCCIO6
6
VCCIO6
6
W8
VCCIO6
6
VCCIO6
6
Y12
VCCIO6
6
VCCIO6
6
G3
VCCIO7
7
VCCIO7
7
K3
VCCIO7
7
VCCIO7
7
K7
VCCIO7
7
VCCIO7
7
N3
VCCIO7
7
VCCIO7
7
N8
VCCIO7
7
VCCIO7
7
P12
VCCIO7
7
VCCIO7
7
R12
VCCIO7
7
VCCIO7
7
T3
VCCIO7
7
VCCIO7
7
T8
VCCIO7
7
VCCIO7
7
AD28
VCCIO8
8
VCCIO8
8
AG32
VCCIO8
8
VCCIO8
8
AB12
VCCAUX
-
VCCAUX
-
AB13
VCCAUX
-
VCCAUX
-
AB22
VCCAUX
-
VCCAUX
-
AB23
VCCAUX
-
VCCAUX
-
4-249
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AC13
VCCAUX
AC22
M13
LFE2M100E/SE
Ball/Pad
Function
Bank
-
VCCAUX
-
VCCAUX
-
VCCAUX
-
VCCAUX
-
VCCAUX
-
M22
VCCAUX
-
VCCAUX
-
N12
VCCAUX
-
VCCAUX
-
N13
VCCAUX
-
VCCAUX
-
N22
VCCAUX
-
VCCAUX
-
N23
VCCAUX
-
VCCAUX
-
A1
GND
-
GND
-
A10
GND
-
GND
-
A13
GND
-
GND
-
A22
GND
-
GND
-
A25
GND
-
GND
-
A34
GND
-
GND
-
AB16
GND
-
GND
-
AB17
GND
-
GND
-
AB18
GND
-
GND
-
AB19
GND
-
GND
-
AB26
GND
-
GND
-
AB31
GND
-
GND
-
AB4
GND
-
GND
-
AB9
GND
-
GND
-
AC16
GND
-
GND
-
AC17
GND
-
GND
-
AC18
GND
-
GND
-
AC19
GND
-
GND
-
AD27
GND
-
GND
-
AE27
GND
-
GND
-
AE31
GND
-
GND
-
AE4
GND
-
GND
-
AE8
GND
-
GND
-
AF12
GND
-
GND
-
AF16
GND
-
GND
-
AF19
GND
-
GND
-
AF23
GND
-
GND
-
AG31
GND
-
GND
-
AH31
GND
-
GND
-
Dual Function
Differential
AH4
GND
-
GND
-
AJ14
GND
-
GND
-
AJ21
GND
-
GND
-
AK27
GND
-
GND
-
AK8
GND
-
GND
-
AL10
GND
-
GND
-
AL16
GND
-
GND
-
AL19
GND
-
GND
-
AL2
GND
-
GND
-
AL25
GND
-
GND
-
AL33
GND
-
GND
-
AP1
GND
-
GND
-
AP10
GND
-
GND
-
AP13
GND
-
GND
-
4-250
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AP22
GND
AP25
AP34
LFE2M100E/SE
Ball/Pad
Function
Bank
-
GND
-
GND
-
GND
-
GND
-
GND
-
D10
GND
-
GND
-
D16
GND
-
GND
-
D19
GND
-
GND
-
D2
GND
-
GND
-
D25
GND
-
GND
-
D33
GND
-
GND
-
E27
GND
-
GND
-
E8
GND
-
GND
-
F14
GND
-
GND
-
Dual Function
Differential
F21
GND
-
GND
-
G31
GND
-
GND
-
G4
GND
-
GND
-
J12
GND
-
GND
-
J16
GND
-
GND
-
J19
GND
-
GND
-
J23
GND
-
GND
-
K27
GND
-
GND
-
K31
GND
-
GND
-
K4
GND
-
GND
-
K8
GND
-
GND
-
M16
GND
-
GND
-
M17
GND
-
GND
-
M18
GND
-
GND
-
M19
GND
-
GND
-
N16
GND
-
GND
-
N17
GND
-
GND
-
N18
GND
-
GND
-
N19
GND
-
GND
-
N26
GND
-
GND
-
N31
GND
-
GND
-
N4
GND
-
GND
-
N9
GND
-
GND
-
R16
GND
-
GND
-
R17
GND
-
GND
-
R18
GND
-
GND
-
R19
GND
-
GND
-
T12
GND
-
GND
-
T13
GND
-
GND
-
T15
GND
-
GND
-
T16
GND
-
GND
-
T17
GND
-
GND
-
T18
GND
-
GND
-
T19
GND
-
GND
-
T20
GND
-
GND
-
T22
GND
-
GND
-
T23
GND
-
GND
-
T26
GND
-
GND
-
T31
GND
-
GND
-
4-251
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
T4
GND
-
LFE2M100E/SE
Dual Function
Differential
Ball/Pad
Function
Bank
GND
-
T9
GND
-
GND
-
U12
GND
-
GND
-
U13
GND
-
GND
-
U15
GND
-
GND
-
U16
GND
-
GND
-
U17
GND
-
GND
-
U18
GND
-
GND
-
U19
GND
-
GND
-
U20
GND
-
GND
-
U22
GND
-
GND
-
U23
GND
-
GND
-
V12
GND
-
GND
-
V13
GND
-
GND
-
V15
GND
-
GND
-
V16
GND
-
GND
-
V17
GND
-
GND
-
V18
GND
-
GND
-
V19
GND
-
GND
-
V20
GND
-
GND
-
V22
GND
-
GND
-
V23
GND
-
GND
-
W12
GND
-
GND
-
W13
GND
-
GND
-
W15
GND
-
GND
-
W16
GND
-
GND
-
W17
GND
-
GND
-
W18
GND
-
GND
-
W19
GND
-
GND
-
W20
GND
-
GND
-
W22
GND
-
GND
-
W23
GND
-
GND
-
W26
GND
-
GND
-
W31
GND
-
GND
-
W4
GND
-
GND
-
W9
GND
-
GND
-
Y16
GND
-
GND
-
Y17
GND
-
GND
-
Y18
GND
-
GND
-
Y19
GND
-
GND
-
A11
NC
-
NC
-
A12
NC
-
NC
-
A23
NC
-
NC
-
A24
NC
-
NC
-
AA11
NC
-
NC
-
AB11
NC
-
NC
-
AC26
NC
-
NC
-
AC30
NC
-
NC
-
AD11
NC
-
NC
-
AD12
NC
-
NC
-
AD13
NC
-
NC
-
4-252
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AD14
NC
AD15
AD19
LFE2M100E/SE
Ball/Pad
Function
Bank
-
NC
-
NC
-
NC
-
NC
-
NC
-
AD21
NC
-
NC
-
AD22
NC
-
NC
-
AD23
NC
-
NC
-
AE10
NC
-
NC
-
AE11
NC
-
NC
-
AE12
NC
-
NC
-
AE13
NC
-
NC
-
AE19
NC
-
NC
-
AE21
NC
-
NC
-
AE22
NC
-
NC
-
AE23
NC
-
NC
-
AF11
NC
-
NC
-
AF21
NC
-
NC
-
AF22
NC
-
NC
-
AF24
NC
-
NC
-
AF8
NC
-
NC
-
AF9
NC
-
NC
-
AG10
NC
-
NC
-
AG11
NC
-
NC
-
AG24
NC
-
NC
-
AG25
NC
-
NC
-
AG26
NC
-
NC
-
AG3
NC
-
NC
-
AG7
NC
-
NC
-
AG8
NC
-
NC
-
AG9
NC
-
NC
-
AH10
NC
-
NC
-
AH11
NC
-
NC
-
AH13
NC
-
NC
-
AH24
NC
-
NC
-
AH25
NC
-
NC
-
AH26
NC
-
NC
-
AH27
NC
-
NC
-
AH5
NC
-
NC
-
AH6
NC
-
NC
-
AH7
NC
-
NC
-
AH8
NC
-
NC
-
AH9
NC
-
NC
-
AJ10
NC
-
NC
-
AJ11
NC
-
NC
-
AJ13
NC
-
NC
-
AJ24
NC
-
NC
-
AJ25
NC
-
NC
-
AJ26
NC
-
NC
-
AJ27
NC
-
NC
-
AJ3
NC
-
NC
-
AJ4
NC
-
NC
-
AJ5
NC
-
NC
-
Dual Function
Differential
4-253
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
AJ6
NC
AJ7
AJ8
LFE2M100E/SE
Ball/Pad
Function
Bank
-
NC
-
NC
-
NC
-
NC
-
NC
-
AJ9
NC
-
NC
-
AK10
NC
-
NC
-
AK11
NC
-
NC
-
AK12
NC
-
NC
-
AK24
NC
-
NC
-
AK25
NC
-
NC
-
AK26
NC
-
NC
-
AK4
NC
-
NC
-
AK9
NC
-
NC
-
AL11
NC
-
NC
-
AL12
NC
-
NC
-
AL34
NC
-
NC
-
AM10
NC
-
NC
-
AM11
NC
-
NC
-
AM13
NC
-
NC
-
AM25
NC
-
NC
-
AN10
NC
-
NC
-
AN11
NC
-
NC
-
AN12
NC
-
NC
-
AN13
NC
-
NC
-
AN24
NC
-
NC
-
AN25
NC
-
NC
-
AP11
NC
-
NC
-
AP12
NC
-
NC
-
AP24
NC
-
NC
-
B10
NC
-
NC
-
B11
NC
-
NC
-
B12
NC
-
NC
-
B13
NC
-
NC
-
B22
NC
-
NC
-
B23
NC
-
NC
-
B24
NC
-
NC
-
B25
NC
-
NC
-
C10
NC
-
NC
-
C11
NC
-
NC
-
C13
NC
-
NC
-
C22
NC
-
NC
-
C24
NC
-
NC
-
C25
NC
-
NC
-
D1
NC
-
NC
-
D15
NC
-
NC
-
D24
NC
-
NC
-
D34
NC
-
NC
-
E10
NC
-
NC
-
E24
NC
-
NC
-
E25
NC
-
NC
-
E26
NC
-
NC
-
E3
NC
-
NC
-
Dual Function
Differential
4-254
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
E31
NC
E32
E33
LFE2M100E/SE
Ball/Pad
Function
Bank
-
NC
-
NC
-
NC
-
NC
-
NC
-
E34
NC
-
NC
-
E4
NC
-
NC
-
E9
NC
-
NC
-
F10
NC
-
NC
-
F25
NC
-
NC
-
F26
NC
-
NC
-
F27
NC
-
NC
-
F28
NC
-
NC
-
F29
NC
-
NC
-
F30
NC
-
NC
-
F31
NC
-
NC
-
F32
NC
-
NC
-
F33
NC
-
NC
-
F34
NC
-
NC
-
F5
NC
-
NC
-
F6
NC
-
NC
-
F7
NC
-
NC
-
F8
NC
-
NC
-
F9
NC
-
NC
-
G10
NC
-
NC
-
G11
NC
-
NC
-
G24
NC
-
NC
-
G25
NC
-
NC
-
G26
NC
-
NC
-
G27
NC
-
NC
-
G28
NC
-
NC
-
G29
NC
-
NC
-
G30
NC
-
NC
-
G33
NC
-
NC
-
G34
NC
-
NC
-
G7
NC
-
NC
-
G8
NC
-
NC
-
G9
NC
-
NC
-
H10
NC
-
NC
-
H11
NC
-
NC
-
H24
NC
-
NC
-
H25
NC
-
NC
-
H26
NC
-
NC
-
H27
NC
-
NC
-
H28
NC
-
NC
-
H29
NC
-
NC
-
H8
NC
-
NC
-
H9
NC
-
NC
-
J10
NC
-
NC
-
J11
NC
-
NC
-
J24
NC
-
NC
-
J25
NC
-
NC
-
J26
NC
-
NC
-
Dual Function
Differential
4-255
Dual Function
Differential
Pinout Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LFE2M70E/SE and LFE2M100E/SE Logic Signal Connections: 1152 fpBGA
LFE2M70E/SE
Ball
Number
Ball/Pad
Function
Bank
J9
NC
K10
K11
LFE2M100E/SE
Ball/Pad
Function
Bank
-
NC
-
NC
-
NC
-
NC
-
NC
-
K12
NC
-
NC
-
K13
NC
-
NC
-
K23
NC
-
NC
-
K24
NC
-
NC
-
K25
NC
-
NC
-
K26
NC
-
NC
-
L11
NC
-
NC
-
L12
NC
-
NC
-
L13
NC
-
NC
-
L14
NC
-
NC
-
L21
NC
-
NC
-
L22
NC
-
NC
-
L23
NC
-
NC
-
L24
NC
-
NC
-
L25
NC
-
NC
-
L26
NC
-
NC
-
M11
NC
-
NC
-
M24
NC
-
NC
-
M25
NC
-
NC
-
M6
NC
-
NC
-
M8
NC
-
NC
-
N10
NC
-
NC
-
N11
NC
-
NC
-
P10
NC
-
NC
-
P25
NC
-
NC
-
P26
NC
-
NC
-
R9
NC
-
NC
-
T11
NC
-
NC
-
U11
NC
-
NC
-
W11
NC
-
NC
-
Y10
NC
-
NC
-
Dual Function
Differential
Y11
NC
-
NC
-
R15
VCCPLL
-
VCCPLL
-
R20
VCCPLL
-
VCCPLL
-
Y15
VCCPLL
-
VCCPLL
-
Y20
VCCPLL
-
VCCPLL
-
Dual Function
Differential
* Supports true LVDS. Other differential signals must be emulated with external resistors.
** These dedicated input pins can be used for GPLLs or GDLLs within the respective quadrant.
*** For density migration, board design must take into account that these sysCONFIG pins are dual function for the lower density devices
(ECP2M20 and ECP2M35) and are dedicated pins for the higher density devices (ECP2M50, ECP2M70, and ECP2M100).
****Due to packaging bond out option, this DQS does not have all the necessary DQ pins bonded out for a full 8-bit data width.
Note: VCCIO and GND pads are used to determine the average DC current drawn by I/Os between GND/VCCIO connections, or between the
last GND/VCCIO in an I/O bank and the end of an I/O bank. The substrate pads listed in the Pin Table do not necessarily have a one to one
connection with a package ball or pin.
4-256
LatticeECP2/M Family Data Sheet
Ordering Information
August 2007
Data Sheet DS1006
LatticeECP2 Part Number Description
LFE2 – XX XE – X XXXXXX X
Device Family
ECP2 (LatticeECP2 FPGA)
Grade
C = Commercial
I = Industrial
Logic Capacity
6 = 6K LUTs
12 = 12K LUTs
20 = 20K LUTs
35 = 35K LUTs
50 = 50K LUTs
70 = 70K LUTs
Package
T144 = 144-pin TQFP
Q208 = 208-pin PQFP
F256 = 256-ball fpBGA
F484 = 484-ball fpBGA
F672 = 672-ball fpBGA
F900 = 900-ball fpBGA
Encryption
S = Security Series (Encryption Feature)
Blank = Standard Series (No Encryption)
TN144 = 144-pin Lead-Free TQFP
QN208 = 208-pin Lead-Free PQFP
FN256 = 256-ball Lead-Free fpBGA
FN484 = 484-ball Lead-Free fpBGA
FN672 = 672-ball Lead-Free fpBGA
FN900 = 900-ball Lead-Free fpBGA
Supply Voltage
E = 1.2V
Speed
5 = Slowest
6
7 = Fastest
Ordering Information
Note: LatticeECP2 devices are dual marked. For example, the commercial speed grade LFE2-50E-7F672C is also
marked with industrial grade -6I (LFE2-50E-6F672I). The commercial grade is one speed grade faster than the
associated dual mark industrial grade. The slowest commercial speed grade does not have industrial markings.
The markings appear as follows:
LFE2-50E
7F672C-6I
LFE2-50SE
7F672C-6I
Datecode
Datecode
© 2007 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
5-1
DS1006 Order Info_01.5
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Standard Series Devices, Conventional Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-6E-5T144C
90
1.2V
-5
TQFP
144
COM
6
LFE2-6E-6T144C
90
1.2V
-6
TQFP
144
COM
6
LFE2-6E-7T144C
90
1.2V
-7
TQFP
144
COM
6
LFE2-6E-5F256C
190
1.2V
-5
fpBGA
256
COM
6
LFE2-6E-6F256C
190
1.2V
-6
fpBGA
256
COM
6
LFE2-6E-7F256C
190
1.2V
-7
fpBGA
256
COM
6
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-12E-5T144C
93
1.2V
-5
TQFP
144
COM
12
LFE2-12E-6T144C
93
1.2V
-6
TQFP
144
COM
12
LFE2-12E-7T144C
93
1.2V
-7
TQFP
144
COM
12
LFE2-12E-5Q208C
131
1.2V
-5
PQFP
208
COM
12
LFE2-12E-6Q208C
131
1.2V
-6
PQFP
208
COM
12
LFE2-12E-7Q208C
131
1.2V
-7
PQFP
208
COM
12
LFE2-12E-5F256C
193
1.2V
-5
fpBGA
256
COM
12
LFE2-12E-6F256C
193
1.2V
-6
fpBGA
256
COM
12
LFE2-12E-7F256C
193
1.2V
-7
fpBGA
256
COM
12
LFE2-12E-5F484C
297
1.2V
-5
fpBGA
484
COM
12
LFE2-12E-6F484C
297
1.2V
-6
fpBGA
484
COM
12
LFE2-12E-7F484C
297
1.2V
-7
fpBGA
484
COM
12
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20E-5Q208C
Part Number
131
1.2V
-5
PQFP
208
COM
20
LFE2-20E-6Q208C
131
1.2V
-6
PQFP
208
COM
20
LFE2-20E-7Q208C
131
1.2V
-7
PQFP
208
COM
20
LFE2-20E-5F256C
193
1.2V
-5
fpBGA
256
COM
20
LFE2-20E-6F256C
193
1.2V
-6
fpBGA
256
COM
20
LFE2-20E-7F256C
193
1.2V
-7
fpBGA
256
COM
20
LFE2-20E-5F484C
331
1.2V
-5
fpBGA
484
COM
20
LFE2-20E-6F484C
331
1.2V
-6
fpBGA
484
COM
20
LFE2-20E-7F484C
331
1.2V
-7
fpBGA
484
COM
20
LFE2-20E-5F672C
402
1.2V
-5
fpBGA
672
COM
20
LFE2-20E-6F672C
402
1.2V
-6
fpBGA
672
COM
20
LFE2-20E-7F672C
402
1.2V
-7
fpBGA
672
COM
20
5-2
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35E-5F484C
Part Number
331
1.2V
-5
fpBGA
484
COM
35
LFE2-35E-6F484C
331
1.2V
-6
fpBGA
484
COM
35
LFE2-35E-7F484C
331
1.2V
-7
fpBGA
484
COM
35
LFE2-35E-5F672C
450
1.2V
-5
fpBGA
672
COM
35
LFE2-35E-6F672C
450
1.2V
-6
fpBGA
672
COM
35
LFE2-35E-7F672C
450
1.2V
-7
fpBGA
672
COM
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50E-5F484C
339
1.2V
-5
fpBGA
484
COM
50
LFE2-50E-6F484C
339
1.2V
-6
fpBGA
484
COM
50
LFE2-50E-7F484C
339
1.2V
-7
fpBGA
484
COM
50
LFE2-50E-5F672C
500
1.2V
-5
fpBGA
672
COM
50
LFE2-50E-6F672C
500
1.2V
-6
fpBGA
672
COM
50
LFE2-50E-7F672C
500
1.2V
-7
fpBGA
672
COM
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70E-5F672C
500
1.2V
-5
fpBGA
672
COM
70
LFE2-70E-6F672C
500
1.2V
-6
fpBGA
672
COM
70
LFE2-70E-7F672C
500
1.2V
-7
fpBGA
672
COM
70
LFE2-70E-5F900C
583
1.2V
-5
fpBGA
900
COM
70
LFE2-70E-6F900C
583
1.2V
-6
fpBGA
900
COM
70
LFE2-70E-7F900C
583
1.2V
-7
fpBGA
900
COM
70
Part Number
Part Number
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-6E-5T144I
90
1.2V
-5
TQFP
144
IND
6
LFE2-6E-6T144I
90
1.2V
-6
TQFP
144
IND
6
LFE2-6E-5F256I
190
1.2V
-5
fpBGA
256
IND
6
LFE2-6E-6F256I
190
1.2V
-6
fpBGA
256
IND
6
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
93
1.2V
-5
TQFP
144
IND
12
LFE2-12E-6T144I
93
1.2V
-6
TQFP
144
IND
12
LFE2-12E-5Q208I
131
1.2V
-5
PQFP
208
IND
12
LFE2-12E-6Q208I
131
1.2V
-6
PQFP
208
IND
12
LFE2-12E-5F256I
193
1.2V
-5
fpBGA
256
IND
12
LFE2-12E-6F256I
193
1.2V
-6
fpBGA
256
IND
12
LFE2-12E-5F484I
297
1.2V
-5
fpBGA
484
IND
12
LFE2-12E-6F484I
297
1.2V
-6
fpBGA
484
IND
12
Part Number
LFE2-12E-5T144I
5-3
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20E-5Q208I
Part Number
131
1.2V
-5
PQFP
208
IND
20
LFE2-20E-6Q208I
131
1.2V
-6
PQFP
208
IND
20
LFE2-20E-5F256I
193
1.2V
-5
fpBGA
256
IND
20
LFE2-20E-6F256I
193
1.2V
-6
fpBGA
256
IND
20
LFE2-20E-5F484I
331
1.2V
-5
fpBGA
484
IND
20
LFE2-20E-6F484I
331
1.2V
-6
fpBGA
484
IND
20
LFE2-20E-5F672I
402
1.2V
-5
fpBGA
672
IND
20
LFE2-20E-6F672I
402
1.2V
-6
fpBGA
672
IND
20
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35E-5F484I
331
1.2V
-5
fpBGA
484
IND
35
LFE2-35E-6F484I
331
1.2V
-6
fpBGA
484
IND
35
LFE2-35E-5F672I
450
1.2V
-5
fpBGA
672
IND
35
LFE2-35E-6F672I
450
1.2V
-6
fpBGA
672
IND
35
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50E-5F484I
339
1.2V
-5
fpBGA
484
IND
50
LFE2-50E-6F484I
339
1.2V
-6
fpBGA
484
IND
50
LFE2-50E-5F672I
500
1.2V
-5
fpBGA
672
IND
50
LFE2-50E-6F672I
500
1.2V
-6
fpBGA
672
IND
50
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70E-5F672I
500
1.2V
-5
fpBGA
672
IND
70
LFE2-70E-6F672I
500
1.2V
-6
fpBGA
672
IND
70
LFE2-70E-5F900I
583
1.2V
-5
fpBGA
900
IND
70
LFE2-70E-6F900I
583
1.2V
-6
fpBGA
900
IND
70
5-4
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 Standard Series Devices, Lead-Free Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-6E-5TN144C
90
1.2V
-5
Lead-Free TQFP
144
COM
6
LFE2-6E-6TN144C
90
1.2V
-6
Lead-Free TQFP
144
COM
6
LFE2-6E-7TN144C
90
1.2V
-7
Lead-Free TQFP
144
COM
6
LFE2-6E-5FN256C
190
1.2V
-5
Lead-Free fpBGA
256
COM
6
LFE2-6E-6FN256C
190
1.2V
-6
Lead-Free fpBGA
256
COM
6
LFE2-6E-7FN256C
190
1.2V
-7
Lead-Free fpBGA
256
COM
6
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-12E-5TN144C
93
1.2V
-5
Lead-Free TQFP
144
COM
12
LFE2-12E-6TN144C
93
1.2V
-6
Lead-Free TQFP
144
COM
12
LFE2-12E-7TN144C
93
1.2V
-7
Lead-Free TQFP
144
COM
12
LFE2-12E-5QN208C
131
1.2V
-5
Lead-Free PQFP
208
COM
12
LFE2-12E-6QN208C
131
1.2V
-6
Lead-Free PQFP
208
COM
12
LFE2-12E-7QN208C
131
1.2V
-7
Lead-Free PQFP
208
COM
12
LFE2-12E-5FN256C
193
1.2V
-5
Lead-Free fpBGA
256
COM
12
LFE2-12E-6FN256C
193
1.2V
-6
Lead-Free fpBGA
256
COM
12
LFE2-12E-7FN256C
193
1.2V
-7
Lead-Free fpBGA
256
COM
12
LFE2-12E-5FN484C
297
1.2V
-5
Lead-Free fpBGA
484
COM
12
LFE2-12E-6FN484C
297
1.2V
-6
Lead-Free fpBGA
484
COM
12
LFE2-12E-7FN484C
297
1.2V
-7
Lead-Free fpBGA
484
COM
12
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20E-5QN208C
131
1.2V
-5
Lead-Free PQFP
208
COM
20
LFE2-20E-6QN208C
131
1.2V
-6
Lead-Free PQFP
208
COM
20
LFE2-20E-7QN208C
131
1.2V
-7
Lead-Free PQFP
208
COM
20
LFE2-20E-5FN256C
193
1.2V
-5
Lead-Free fpBGA
256
COM
20
LFE2-20E-6FN256C
193
1.2V
-6
Lead-Free fpBGA
256
COM
20
LFE2-20E-7FN256C
193
1.2V
-7
Lead-Free fpBGA
256
COM
20
LFE2-20E-5FN484C
331
1.2V
-5
Lead-Free fpBGA
484
COM
20
LFE2-20E-6FN484C
331
1.2V
-6
Lead-Free fpBGA
484
COM
20
LFE2-20E-7FN484C
331
1.2V
-7
Lead-Free fpBGA
484
COM
20
LFE2-20E-5FN672C
402
1.2V
-5
Lead-Free fpBGA
672
COM
20
LFE2-20E-6FN672C
402
1.2V
-6
Lead-Free fpBGA
672
COM
20
LFE2-20E-7FN672C
402
1.2V
-7
Lead-Free fpBGA
672
COM
20
5-5
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35E-5FN484C
331
1.2V
-5
Lead-Free fpBGA
484
COM
35
LFE2-35E-6FN484C
331
1.2V
-6
Lead-Free fpBGA
484
COM
35
LFE2-35E-7FN484C
331
1.2V
-7
Lead-Free fpBGA
484
COM
35
LFE2-35E-5FN672C
450
1.2V
-5
Lead-Free fpBGA
672
COM
35
LFE2-35E-6FN672C
450
1.2V
-6
Lead-Free fpBGA
672
COM
35
LFE2-35E-7FN672C
450
1.2V
-7
Lead-Free fpBGA
672
COM
35
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50E-5FN484C
339
1.2V
-5
Lead-Free fpBGA
484
COM
50
LFE2-50E-6FN484C
339
1.2V
-6
Lead-Free fpBGA
484
COM
50
LFE2-50E-7FN484C
339
1.2V
-7
Lead-Free fpBGA
484
COM
50
LFE2-50E-5FN672C
500
1.2V
-5
Lead-Free fpBGA
672
COM
50
LFE2-50E-6FN672C
500
1.2V
-6
Lead-Free fpBGA
672
COM
50
LFE2-50E-7FN672C
500
1.2V
-7
Lead-Free fpBGA
672
COM
50
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70E-5FN672C
500
1.2V
-5
Lead-Free fpBGA
672
COM
70
LFE2-70E-6FN672C
500
1.2V
-6
Lead-Free fpBGA
672
COM
70
LFE2-70E-7FN672C
500
1.2V
-7
Lead-Free fpBGA
672
COM
70
LFE2-70E-5FN900C
583
1.2V
-5
Lead-Free fpBGA
900
COM
70
LFE2-70E-6FN900C
583
1.2V
-6
Lead-Free fpBGA
900
COM
70
LFE2-70E-7FN900C
583
1.2V
-7
Lead-Free fpBGA
900
COM
70
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
90
1.2V
-5
Lead-Free TQFP
144
IND
6
LFE2-6E-6TN144I
90
1.2V
-6
Lead-Free TQFP
144
IND
6
LFE2-6E-5FN256I
190
1.2V
-5
Lead-Free fpBGA
256
IND
6
LFE2-6E-6FN256I
190
1.2V
-6
Lead-Free fpBGA
256
IND
6
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-12E-5TN144I
93
1.2V
-5
Lead-Free TQFP
144
IND
12
LFE2-12E-6TN144I
93
1.2V
-6
Lead-Free TQFP
144
IND
12
LFE2-12E-5QN208I
131
1.2V
-5
Lead-Free PQFP
208
IND
12
LFE2-12E-6QN208I
131
1.2V
-6
Lead-Free PQFP
208
IND
12
LFE2-12E-5FN256I
193
1.2V
-5
Lead-Free fpBGA
256
IND
12
LFE2-12E-6FN256I
193
1.2V
-6
Lead-Free fpBGA
256
IND
12
LFE2-12E-5FN484I
297
1.2V
-5
Lead-Free fpBGA
484
IND
12
LFE2-12E-6FN484I
297
1.2V
-6
Lead-Free fpBGA
484
IND
12
LFE2-6E-5TN144I
Part Number
5-6
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20E-5QN208I
Part Number
131
1.2V
-5
Lead-Free PQFP
208
IND
20
LFE2-20E-6QN208I
131
1.2V
-6
Lead-Free PQFP
208
IND
20
LFE2-20E-5FN256I
193
1.2V
-5
Lead-Free fpBGA
256
IND
20
LFE2-20E-6FN256I
193
1.2V
-6
Lead-Free fpBGA
256
IND
20
LFE2-20E-5FN484I
331
1.2V
-5
Lead-Free fpBGA
484
IND
20
LFE2-20E-6FN484I
331
1.2V
-6
Lead-Free fpBGA
484
IND
20
LFE2-20E-5FN672I
402
1.2V
-5
Lead-Free fpBGA
672
IND
20
LFE2-20E-6FN672I
402
1.2V
-6
Lead-Free fpBGA
672
IND
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35E-5FN484I
Part Number
331
1.2V
-5
Lead-Free fpBGA
484
IND
35
LFE2-35E-6FN484I
331
1.2V
-6
Lead-Free fpBGA
484
IND
35
LFE2-35E-5FN672I
450
1.2V
-5
Lead-Free fpBGA
672
IND
35
LFE2-35E-6FN672I
450
1.2V
-6
Lead-Free fpBGA
672
IND
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50E-5FN484I
339
1.2V
-5
Lead-Free fpBGA
484
IND
50
LFE2-50E-6FN484I
339
1.2V
-6
Lead-Free fpBGA
484
IND
50
LFE2-50E-5FN672I
500
1.2V
-5
Lead-Free fpBGA
672
IND
50
LFE2-50E-6FN672I
500
1.2V
-6
Lead-Free fpBGA
672
IND
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70E-5FN672I
500
1.2V
-5
Lead-Free fpBGA
672
IND
70
LFE2-70E-6FN672I
500
1.2V
-6
Lead-Free fpBGA
672
IND
70
LFE2-70E-5FN900I
583
1.2V
-5
Lead-Free fpBGA
900
IND
70
LFE2-70E-6FN900I
583
1.2V
-6
Lead-Free fpBGA
900
IND
70
Part Number
Part Number
5-7
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 S-Series Devices, Conventional Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-6SE-5T144C
90
1.2V
-5
TQFP
144
Com
6
LFE2-6SE-6T144C
90
1.2V
-6
TQFP
144
Com
6
LFE2-6SE-7T144C
90
1.2V
-7
TQFP
144
Com
6
LFE2-6SE-5F256C
190
1.2V
-5
fpBGA
256
Com
6
LFE2-6SE-6F256C
190
1.2V
-6
fpBGA
256
Com
6
LFE2-6SE-7F256C
190
1.2V
-7
fpBGA
256
Com
6
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-12SE-5T144C
93
1.2V
-5
TQFP
144
Com
12
LFE2-12SE-6T144C
93
1.2V
-6
TQFP
144
Com
12
LFE2-12SE-7T144C
93
1.2V
-7
TQFP
144
Com
12
LFE2-12SE-5Q208C
131
1.2V
-5
PQFP
208
Com
12
LFE2-12SE-6Q208C
131
1.2V
-6
PQFP
208
Com
12
LFE2-12SE-7Q208C
131
1.2V
-7
PQFP
208
Com
12
LFE2-12SE-5F256C
193
1.2V
-5
fpBGA
256
Com
12
LFE2-12SE-6F256C
193
1.2V
-6
fpBGA
256
Com
12
LFE2-12SE-7F256C
193
1.2V
-7
fpBGA
256
Com
12
LFE2-12SE-5F484C
297
1.2V
-5
fpBGA
484
Com
12
LFE2-12SE-6F484C
297
1.2V
-6
fpBGA
484
Com
12
LFE2-12SE-7F484C
297
1.2V
-7
fpBGA
484
Com
12
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20SE-5Q208C
131
1.2V
-5
PQFP
208
Com
20
LFE2-20SE-6Q208C
131
1.2V
-6
PQFP
208
Com
20
LFE2-20SE-7Q208C
131
1.2V
-7
PQFP
208
Com
20
LFE2-20SE-5F256C
193
1.2V
-5
fpBGA
256
Com
20
LFE2-20SE-6F256C
193
1.2V
-6
fpBGA
256
Com
20
LFE2-20SE-7F256C
193
1.2V
-7
fpBGA
256
Com
20
LFE2-20SE-5F484C
331
1.2V
-5
fpBGA
484
Com
20
LFE2-20SE-6F484C
331
1.2V
-6
fpBGA
484
Com
20
LFE2-20SE-7F484C
331
1.2V
-7
fpBGA
484
Com
20
LFE2-20SE-5F672C
402
1.2V
-5
fpBGA
672
Com
20
LFE2-20SE-6F672C
402
1.2V
-6
fpBGA
672
Com
20
LFE2-20SE-7F672C
402
1.2V
-7
fpBGA
672
Com
20
Part Number
5-8
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35SE-5F484C
Part Number
331
1.2V
-5
fpBGA
484
Com
35
LFE2-35SE-6F484C
331
1.2V
-6
fpBGA
484
Com
35
LFE2-35SE-7F484C
331
1.2V
-7
fpBGA
484
Com
35
LFE2-35SE-5F672C
450
1.2V
-5
fpBGA
672
Com
35
LFE2-35SE-6F672C
450
1.2V
-6
fpBGA
672
Com
35
LFE2-35SE-7F672C
450
1.2V
-7
fpBGA
672
Com
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50SE-5F484C
339
1.2V
-5
fpBGA
484
Com
50
LFE2-50SE-6F484C
339
1.2V
-6
fpBGA
484
Com
50
LFE2-50SE-7F484C
339
1.2V
-7
fpBGA
484
Com
50
LFE2-50SE-5F672C
500
1.2V
-5
fpBGA
672
Com
50
LFE2-50SE-6F672C
500
1.2V
-6
fpBGA
672
Com
50
LFE2-50SE-7F672C
500
1.2V
-7
fpBGA
672
Com
50
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70SE-5F672C
Part Number
500
1.2V
-5
fpBGA
672
Com
70
LFE2-70SE-6F672C
500
1.2V
-6
fpBGA
672
Com
70
LFE2-70SE-7F672C
500
1.2V
-7
fpBGA
672
Com
70
LFE2-70SE-5F900C
583
1.2V
-5
fpBGA
900
Com
70
LFE2-70SE-6F900C
583
1.2V
-6
fpBGA
900
Com
70
LFE2-70SE-7F900C
583
1.2V
-7
fpBGA
900
Com
70
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-6SE-5T144I
90
1.2V
-5
TQFP
144
Ind
6
LFE2-6SE-6T144I
90
1.2V
-6
TQFP
144
Ind
6
LFE2-6SE-5F256I
190
1.2V
-5
fpBGA
256
Ind
6
LFE2-6SE-6F256I
190
1.2V
-6
fpBGA
256
Ind
6
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
93
1.2V
-5
TQFP
144
Ind
12
LFE2-12SE-6T144I
93
1.2V
-6
TQFP
144
Ind
12
LFE2-12SE-5Q208I
131
1.2V
-5
PQFP
208
Ind
12
LFE2-12SE-6Q208I
131
1.2V
-6
PQFP
208
Ind
12
LFE2-12SE-5F256I
193
1.2V
-5
fpBGA
256
Ind
12
LFE2-12SE-6F256I
193
1.2V
-6
fpBGA
256
Ind
12
LFE2-12SE-5F484I
297
1.2V
-5
fpBGA
484
Ind
12
LFE2-12SE-6F484I
297
1.2V
-6
fpBGA
484
Ind
12
Part Number
LFE2-12SE-5T144I
5-9
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20SE-5Q208I
Part Number
131
1.2V
-5
PQFP
208
Ind
20
LFE2-20SE-6Q208I
131
1.2V
-6
PQFP
208
Ind
20
LFE2-20SE-5F256I
193
1.2V
-5
fpBGA
256
Ind
20
LFE2-20SE-6F256I
193
1.2V
-6
fpBGA
256
Ind
20
LFE2-20SE-5F484I
331
1.2V
-5
fpBGA
484
Ind
20
LFE2-20SE-6F484I
331
1.2V
-6
fpBGA
484
Ind
20
LFE2-20SE-5F672I
402
1.2V
-5
fpBGA
672
Ind
20
LFE2-20SE-6F672I
402
1.2V
-6
fpBGA
672
Ind
20
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35SE-5F484I
331
1.2V
-5
fpBGA
484
Ind
35
LFE2-35SE-6F484I
331
1.2V
-6
fpBGA
484
Ind
35
LFE2-35SE-5F672I
450
1.2V
-5
fpBGA
672
Ind
35
LFE2-35SE-6F672I
450
1.2V
-6
fpBGA
672
Ind
35
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50SE-5F484I
339
1.2V
-5
fpBGA
484
Ind
50
LFE2-50SE-6F484I
339
1.2V
-6
fpBGA
484
Ind
50
LFE2-50SE-5F672I
500
1.2V
-5
fpBGA
672
Ind
50
LFE2-50SE-6F672I
500
1.2V
-6
fpBGA
672
Ind
50
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70SE-5F672I
500
1.2V
-5
fpBGA
672
Ind
70
LFE2-70SE-6F672I
500
1.2V
-6
fpBGA
672
Ind
70
LFE2-70SE-5F900I
583
1.2V
-5
fpBGA
900
Ind
70
LFE2-70SE-6F900I
583
1.2V
-6
fpBGA
900
Ind
70
5-10
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2 S-Series Devices, Lead-Free Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-6SE-5TN144C
90
1.2V
-5
Lead-Free TQFP
144
Com
6
LFE2-6SE-6TN144C
90
1.2V
-6
Lead-Free TQFP
144
Com
6
LFE2-6SE-7TN144C
90
1.2V
-7
Lead-Free TQFP
144
Com
6
LFE2-6SE-5FN256C
190
1.2V
-5
Lead-Free fpBGA
256
Com
6
LFE2-6SE-6FN256C
190
1.2V
-6
Lead-Free fpBGA
256
Com
6
LFE2-6SE-7FN256C
190
1.2V
-7
Lead-Free fpBGA
256
Com
6
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-12SE-5TN144C
Part Number
93
1.2V
-5
Lead-Free TQFP
144
Com
12
LFE2-12SE-6TN144C
93
1.2V
-6
Lead-Free TQFP
144
Com
12
LFE2-12SE-7TN144C
93
1.2V
-7
Lead-Free TQFP
144
Com
12
LFE2-12SE-5QN208C
131
1.2V
-5
Lead-Free PQFP
208
Com
12
LFE2-12SE-6QN208C
131
1.2V
-6
Lead-Free PQFP
208
Com
12
LFE2-12SE-7QN208C
131
1.2V
-7
Lead-Free PQFP
208
Com
12
LFE2-12SE-5FN256C
193
1.2V
-5
Lead-Free fpBGA
256
Com
12
LFE2-12SE-6FN256C
193
1.2V
-6
Lead-Free fpBGA
256
Com
12
LFE2-12SE-7FN256C
193
1.2V
-7
Lead-Free fpBGA
256
Com
12
LFE2-12SE-5FN484C
297
1.2V
-5
Lead-Free fpBGA
484
Com
12
LFE2-12SE-6FN484C
297
1.2V
-6
Lead-Free fpBGA
484
Com
12
LFE2-12SE-7FN484C
297
1.2V
-7
Lead-Free fpBGA
484
Com
12
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20SE-5QN208C
131
1.2V
-5
Lead-Free PQFP
208
Com
20
LFE2-20SE-6QN208C
131
1.2V
-6
Lead-Free PQFP
208
Com
20
LFE2-20SE-7QN208C
131
1.2V
-7
Lead-Free PQFP
208
Com
20
LFE2-20SE-5FN256C
193
1.2V
-5
Lead-Free fpBGA
256
Com
20
LFE2-20SE-6FN256C
193
1.2V
-6
Lead-Free fpBGA
256
Com
20
LFE2-20SE-7FN256C
193
1.2V
-7
Lead-Free fpBGA
256
Com
20
LFE2-20SE-5FN484C
331
1.2V
-5
Lead-Free fpBGA
484
Com
20
LFE2-20SE-6FN484C
331
1.2V
-6
Lead-Free fpBGA
484
Com
20
LFE2-20SE-7FN484C
331
1.2V
-7
Lead-Free fpBGA
484
Com
20
LFE2-20SE-5FN672C
402
1.2V
-5
Lead-Free fpBGA
672
Com
20
LFE2-20SE-6FN672C
402
1.2V
-6
Lead-Free fpBGA
672
Com
20
LFE2-20SE-7FN672C
402
1.2V
-7
Lead-Free fpBGA
672
Com
20
Part Number
5-11
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35SE-5FN484C
Part Number
331
1.2V
-5
Lead-Free fpBGA
484
Com
35
LFE2-35SE-6FN484C
331
1.2V
-6
Lead-Free fpBGA
484
Com
35
LFE2-35SE-7FN484C
331
1.2V
-7
Lead-Free fpBGA
484
Com
35
LFE2-35SE-5FN672C
450
1.2V
-5
Lead-Free fpBGA
672
Com
35
LFE2-35SE-6FN672C
450
1.2V
-6
Lead-Free fpBGA
672
Com
35
LFE2-35SE-7FN672C
450
1.2V
-7
Lead-Free fpBGA
672
Com
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50SE-5FN484C
Part Number
339
1.2V
-5
Lead-Free fpBGA
484
Com
50
LFE2-50SE-6FN484C
339
1.2V
-6
Lead-Free fpBGA
484
Com
50
LFE2-50SE-7FN484C
339
1.2V
-7
Lead-Free fpBGA
484
Com
50
LFE2-50SE-5FN672C
500
1.2V
-5
Lead-Free fpBGA
672
Com
50
LFE2-50SE-6FN672C
500
1.2V
-6
Lead-Free fpBGA
672
Com
50
LFE2-50SE-7FN672C
500
1.2V
-7
Lead-Free fpBGA
672
Com
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70SE-5FN672C
500
1.2V
-5
Lead-Free fpBGA
672
Com
70
LFE2-70SE-6FN672C
500
1.2V
-6
Lead-Free fpBGA
672
Com
70
LFE2-70SE-7FN672C
500
1.2V
-7
Lead-Free fpBGA
672
Com
70
LFE2-70SE-5FN900C
583
1.2V
-5
Lead-Free fpBGA
900
Com
70
LFE2-70SE-6FN900C
583
1.2V
-6
Lead-Free fpBGA
900
Com
70
LFE2-70SE-7FN900C
583
1.2V
-7
Lead-Free fpBGA
900
Com
70
Part Number
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-6SE-5TN144I
90
1.2V
-5
Lead-Free TQFP
144
Ind
6
LFE2-6SE-6TN144I
90
1.2V
-6
Lead-Free TQFP
144
Ind
6
LFE2-6SE-5FN256I
190
1.2V
-5
Lead-Free fpBGA
256
Ind
6
LFE2-6SE-6FN256I
190
1.2V
-6
Lead-Free fpBGA
256
Ind
6
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-12SE-5TN144I
93
1.2V
-5
Lead-Free TQFP
144
Ind
12
LFE2-12SE-6TN144I
93
1.2V
-6
Lead-Free TQFP
144
Ind
12
LFE2-12SE-5QN208I
131
1.2V
-5
Lead-Free PQFP
208
Ind
12
LFE2-12SE-6QN208I
131
1.2V
-6
Lead-Free PQFP
208
Ind
12
LFE2-12SE-5FN256I
193
1.2V
-5
Lead-Free fpBGA
256
Ind
12
LFE2-12SE-6FN256I
193
1.2V
-6
Lead-Free fpBGA
256
Ind
12
LFE2-12SE-5FN484I
297
1.2V
-5
Lead-Free fpBGA
484
Ind
12
LFE2-12SE-6FN484I
297
1.2V
-6
Lead-Free fpBGA
484
Ind
12
5-12
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-20SE-5QN208I
Part Number
131
1.2V
-5
Lead-Free PQFP
208
Ind
20
LFE2-20SE-6QN208I
131
1.2V
-6
Lead-Free PQFP
208
Ind
20
LFE2-20SE-5FN256I
193
1.2V
-5
Lead-Free fpBGA
256
Ind
20
LFE2-20SE-6FN256I
193
1.2V
-6
Lead-Free fpBGA
256
Ind
20
LFE2-20SE-5FN484I
331
1.2V
-5
Lead-Free fpBGA
484
Ind
20
LFE2-20SE-6FN484I
331
1.2V
-6
Lead-Free fpBGA
484
Ind
20
LFE2-20SE-5FN672I
402
1.2V
-5
Lead-Free fpBGA
672
Ind
20
LFE2-20SE-6FN672I
402
1.2V
-6
Lead-Free fpBGA
672
Ind
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-35SE-5FN484I
331
1.2V
-5
Lead-Free fpBGA
484
Ind
35
LFE2-35SE-6FN484I
331
1.2V
-6
Lead-Free fpBGA
484
Ind
35
LFE2-35SE-5FN672I
450
1.2V
-5
Lead-Free fpBGA
672
Ind
35
LFE2-35SE-6FN672I
450
1.2V
-6
Lead-Free fpBGA
672
Ind
35
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-50SE-5FN484I
Part Number
339
1.2V
-5
Lead-Free fpBGA
484
Ind
50
LFE2-50SE-6FN484I
339
1.2V
-6
Lead-Free fpBGA
484
Ind
50
LFE2-50SE-5FN672I
500
1.2V
-5
Lead-Free fpBGA
672
Ind
50
LFE2-50SE-6FN672I
500
1.2V
-6
Lead-Free fpBGA
672
Ind
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2-70SE-5FN672I
Part Number
500
1.2V
-5
Lead-Free fpBGA
672
Ind
70
LFE2-70SE-6FN672I
500
1.2V
-6
Lead-Free fpBGA
672
Ind
70
LFE2-70SE-5FN900I
583
1.2V
-5
Lead-Free fpBGA
900
Ind
70
LFE2-70SE-6FN900I
583
1.2V
-6
Lead-Free fpBGA
900
Ind
70
5-13
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Part Number Description
LFE2M XXX XE – X XXXXXX X
Device Family
ECP2M (LatticeECP2 FPGA + SERDES)
Grade
C = Commercial
I = Industrial
Logic Capacity
20 = 20K LUTs
35 = 35K LUTs
50 = 50K LUTs
70 = 70K LUTs
100 = 100K LUTs
Package
F256 = 256-ball fpBGA
F484 = 484-ball fpBGA
F672 = 672-ball fpBGA
F900 = 900-ball fpBGA
F1152 = 1152-ball fpBGA
F1156 = 1156-ball fpBGA
Encryption
S = Security Series (Encryption Feature)
Blank = Standard Series (No Encryption)
FN256 = 256-ball Lead-free fpBGA
FN484 = 484-ball Lead-free fpBGA
FN672 = 672-ball Lead-free fpBGA
FN900 = 900-ball Lead-free fpBGA
FN1152 = 1152-ball Lead-free fpBGA
FN1156 = 1156-ball Lead-free fpBGA
Supply Voltage
E = 1.2V
Speed
5 = Slowest
6
7 = Fastest
Ordering Information
Note: LatticeECP2M devices are dual marked. For example, the commercial speed grade LFE2M50E-7F672C is
also marked with industrial grade -6I (LFE2M50E-6F672I). The commercial grade is one speed grade faster than
the associated dual mark industrial grade. The slowest commercial grade does not have industrial markings. The
markings appear as follows:
LFE2M35E
7F672C-6I
LFE2M35SE
7F672C-6I
Datecode
Datecode
Contact Your Local Lattice Sales Representative for Product Availability.
5-14
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Standard Series Devices, Conventional Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20E-5F484C
304
1.2V
-5
fpBGA
484
COM
20
LFE2M20E-6F484C
304
1.2V
-6
fpBGA
484
COM
20
LFE2M20E-7F484C
304
1.2V
-7
fpBGA
484
COM
20
LFE2M20E-5F256C
140
1.2V
-5
fpBGA
256
COM
20
LFE2M20E-6F256C
140
1.2V
-6
fpBGA
256
COM
20
LFE2M20E-7F256C
140
1.2V
-7
fpBGA
256
COM
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35E-5F672C
Part Number
410
1.2V
-5
fpBGA
672
COM
35
LFE2M35E-6F672C
410
1.2V
-6
fpBGA
672
COM
35
LFE2M35E-7F672C
410
1.2V
-7
fpBGA
672
COM
35
LFE2M35E-5F484C
303
1.2V
-5
fpBGA
484
COM
35
LFE2M35E-6F484C
303
1.2V
-6
fpBGA
484
COM
35
LFE2M35E-7F484C
303
1.2V
-7
fpBGA
484
COM
35
LFE2M35E-5F256C
140
1.2V
-5
fpBGA
256
COM
35
LFE2M35E-6F256C
140
1.2V
-6
fpBGA
256
COM
35
LFE2M35E-7F256C
140
1.2V
-7
fpBGA
256
COM
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50E-5F900C
410
1.2V
-5
fpBGA
900
COM
50
LFE2M50E-6F900C
410
1.2V
-6
fpBGA
900
COM
50
LFE2M50E-7F900C
410
1.2V
-7
fpBGA
900
COM
50
LFE2M50E-5F672C
372
1.2V
-5
fpBGA
672
COM
50
LFE2M50E-6F672C
372
1.2V
-6
fpBGA
672
COM
50
LFE2M50E-7F672C
372
1.2V
-7
fpBGA
672
COM
50
LFE2M50E-5F484C
270
1.2V
-5
fpBGA
484
COM
50
LFE2M50E-6F484C
270
1.2V
-6
fpBGA
484
COM
50
LFE2M50E-7F484C
270
1.2V
-7
fpBGA
484
COM
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M70E-5F1152C
436
1.2V
-5
fpBGA
1152
COM
70
LFE2M70E-6F1152C
436
1.2V
-6
fpBGA
1152
COM
70
Part Number
Part Number
LFE2M70E-7F1152C
436
1.2V
-7
fpBGA
1152
COM
70
LFE2M70E-5F900C
416
1.2V
-5
fpBGA
900
COM
70
LFE2M70E-6F900C
416
1.2V
-6
fpBGA
900
COM
70
LFE2M70E-7F900C
416
1.2V
-7
fpBGA
900
COM
70
5-15
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M100E-5F1152C
520
1.2V
-5
fpBGA
1152
COM
100
LFE2M100E-6F1152C
520
1.2V
-6
fpBGA
1152
COM
100
LFE2M100E-7F1152C
520
1.2V
-7
fpBGA
1152
COM
100
LFE2M100E-5F900C
416
1.2V
-5
fpBGA
900
COM
100
LFE2M100E-6F900C
416
1.2V
-6
fpBGA
900
COM
100
LFE2M100E-7F900C
416
1.2V
-7
fpBGA
900
COM
100
5-16
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20E-5F484I
304
1.2V
-5
fpBGA
484
IND
20
LFE2M20E-6F484I
304
1.2V
-6
fpBGA
484
IND
20
LFE2M20E-5F256I
140
1.2V
-5
fpBGA
256
IND
20
LFE2M20E-6F256I
140
1.2V
-6
fpBGA
256
IND
20
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35E-5F672I
410
1.2V
-5
fpBGA
672
IND
35
LFE2M35E-6F672I
410
1.2V
-6
fpBGA
672
IND
35
LFE2M35E-5F484I
303
1.2V
-5
fpBGA
484
IND
35
LFE2M35E-6F484I
303
1.2V
-6
fpBGA
484
IND
35
LFE2M35E-5F256I
140
1.2V
-5
fpBGA
256
IND
35
LFE2M35E-6F256I
140
1.2V
-6
fpBGA
256
IND
35
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50E-5F900I
410
1.2V
-5
fpBGA
900
IND
50
LFE2M50E-6F900I
410
1.2V
-6
fpBGA
900
IND
50
LFE2M50E-5F672I
372
1.2V
-5
fpBGA
672
IND
50
LFE2M50E-6F672I
372
1.2V
-6
fpBGA
672
IND
50
LFE2M50E-5F484I
270
1.2V
-5
fpBGA
484
IND
50
LFE2M50E-6F484I
270
1.2V
-6
fpBGA
484
IND
50
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M70E-5F1152I
436
1.2V
-5
fpBGA
1152
IND
70
LFE2M70E-6F1152I
436
1.2V
-6
fpBGA
1152
IND
70
LFE2M70E-5F900I
416
1.2V
-5
fpBGA
900
IND
70
LFE2M70E-6F900I
416
1.2V
-6
fpBGA
900
IND
70
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M100E-5F1152I
520
1.2V
-5
fpBGA
1152
IND
100
LFE2M100E-6F1152I
520
1.2V
-6
fpBGA
1152
IND
100
LFE2M100E-5F900I
416
1.2V
-5
fpBGA
900
IND
100
LFE2M100E-6F900I
416
1.2V
-6
fpBGA
900
IND
100
5-17
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M Standard Series Devices, Lead-Free Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20E-5FN484C
304
1.2V
-5
Lead-Free fpBGA
484
COM
20
LFE2M20E-6FN484C
304
1.2V
-6
Lead-Free fpBGA
484
COM
20
LFE2M20E-7FN484C
304
1.2V
-7
Lead-Free fpBGA
484
COM
20
LFE2M20E-5FN256C
140
1.2V
-5
Lead-Free fpBGA
256
COM
20
LFE2M20E-6FN256C
140
1.2V
-6
Lead-Free fpBGA
256
COM
20
LFE2M20E-7FN256C
140
1.2V
-7
Lead-Free fpBGA
256
COM
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35E-5FN672C
Part Number
410
1.2V
-5
Lead-Free fpBGA
672
COM
35
LFE2M35E-6FN672C
410
1.2V
-6
Lead-Free fpBGA
672
COM
35
LFE2M35E-7FN672C
410
1.2V
-7
Lead-Free fpBGA
672
COM
35
LFE2M35E-5FN484C
303
1.2V
-5
Lead-Free fpBGA
484
COM
35
LFE2M35E-6FN484C
303
1.2V
-6
Lead-Free fpBGA
484
COM
35
LFE2M35E-7FN484C
303
1.2V
-7
Lead-Free fpBGA
484
COM
35
LFE2M35E-5FN256C
140
1.2V
-5
Lead-Free fpBGA
256
COM
35
LFE2M35E-6FN256C
140
1.2V
-6
Lead-Free fpBGA
256
COM
35
LFE2M35E-7FN256C
140
1.2V
-7
Lead-Free fpBGA
256
COM
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50E-5FN900C
Part Number
410
1.2V
-5
Lead-Free fpBGA
900
COM
50
LFE2M50E-6FN900C
410
1.2V
-6
Lead-Free fpBGA
900
COM
50
LFE2M50E-7FN900C
410
1.2V
-7
Lead-Free fpBGA
900
COM
50
LFE2M50E-5FN672C
372
1.2V
-5
Lead-Free fpBGA
672
COM
50
LFE2M50E-6FN672C
372
1.2V
-6
Lead-Free fpBGA
672
COM
50
LFE2M50E-7FN672C
372
1.2V
-7
Lead-Free fpBGA
672
COM
50
LFE2M50E-5FN484C
270
1.2V
-5
Lead-Free fpBGA
484
COM
50
LFE2M50E-6FN484C
270
1.2V
-6
Lead-Free fpBGA
484
COM
50
LFE2M50E-7FN484C
270
1.2V
-7
Lead-Free fpBGA
484
COM
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M70E-5FN1152C
Part Number
436
1.2V
-5
Lead-Free fpBGA
1152
COM
70
LFE2M70E-6FN1152C
436
1.2V
-6
Lead-Free fpBGA
1152
COM
70
LFE2M70E-7FN1152C
436
1.2V
-7
Lead-Free fpBGA
1152
COM
70
LFE2M70E-5FN900C
416
1.2V
-5
Lead-Free fpBGA
900
COM
70
LFE2M70E-6FN900C
416
1.2V
-6
Lead-Free fpBGA
900
COM
70
LFE2M70E-7FN900C
416
1.2V
-7
Lead-Free fpBGA
900
COM
70
5-18
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M100E-5FN1152C
520
1.2V
-5
Lead-Free fpBGA
1152
COM
100
LFE2M100E-6FN1152C
520
1.2V
-6
Lead-Free fpBGA
1152
COM
100
LFE2M100E-7FN1152C
520
1.2V
-7
Lead-Free fpBGA
1152
COM
100
LFE2M100E-5FN900C
416
1.2V
-5
Lead-Free fpBGA
900
COM
100
LFE2M100E-6FN900C
416
1.2V
-6
Lead-Free fpBGA
900
COM
100
LFE2M100E-7FN900C
416
1.2V
-7
Lead-Free fpBGA
900
COM
100
Industrial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20E-5FN484I
304
1.2V
-5
Lead-Free fpBGA
484
IND
20
LFE2M20E-6FN484I
304
1.2V
-6
Lead-Free fpBGA
484
IND
20
LFE2M20E-5FN256I
140
1.2V
-5
Lead-Free fpBGA
256
IND
20
LFE2M20E-6FN256I
140
1.2V
-6
Lead-Free fpBGA
256
IND
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35E-5FN672I
410
1.2V
-5
Lead-Free fpBGA
672
IND
35
LFE2M35E-6FN672I
410
1.2V
-6
Lead-Free fpBGA
672
IND
35
LFE2M35E-5FN484I
303
1.2V
-5
Lead-Free fpBGA
484
IND
35
LFE2M35E-6FN484I
303
1.2V
-6
Lead-Free fpBGA
484
IND
35
LFE2M35E-5FN256I
140
1.2V
-5
Lead-Free fpBGA
256
IND
35
LFE2M35E-6FN256I
140
1.2V
-6
Lead-Free fpBGA
256
IND
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50E-5FN900I
410
1.2V
-5
Lead-Free fpBGA
900
Ind
50
LFE2M50E-6FN900I
410
1.2V
-6
Lead-Free fpBGA
900
Ind
50
LFE2M50E-5FN672I
372
1.2V
-5
Lead-Free fpBGA
672
Ind
50
LFE2M50E-6FN672I
372
1.2V
-6
Lead-Free fpBGA
672
Ind
50
LFE2M50E-5FN484I
270
1.2V
-5
Lead-Free fpBGA
484
Ind
50
LFE2M50E-6FN484I
270
1.2V
-6
Lead-Free fpBGA
484
Ind
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
436
1.2V
-5
Lead-Free fpBGA
1152
Ind
70
Part Number
Part Number
Part Number
LFE2M70E-5FN1152I
LFE2M70E-6FN1152I
436
1.2V
-6
Lead-Free fpBGA
1152
Ind
70
LFE2M70E-5FN900I
416
1.2V
-5
Lead-Free fpBGA
900
Ind
70
LFE2M70E-6FN900I
416
1.2V
-6
Lead-Free fpBGA
900
Ind
70
5-19
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M100E-5FN1152I
520
1.2V
-5
Lead-Free fpBGA
1152
Ind
100
LFE2M100E-6FN1152I
520
1.2V
-6
Lead-Free fpBGA
1152
Ind
100
LFE2M100E-5FN900I
416
1.2V
-5
Lead-Free fpBGA
900
Ind
100
LFE2M100E-6FN900I
416
1.2V
-6
Lead-Free fpBGA
900
Ind
100
LatticeECP2M S-Series Devices, Conventional Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20SE-5F484C
304
1.2V
-5
fpBGA
484
Com
20
LFE2M20SE-6F484C
304
1.2V
-6
fpBGA
484
Com
20
LFE2M20SE-7F484C
304
1.2V
-7
fpBGA
484
Com
20
LFE2M20SE-5F256C
140
1.2V
-5
fpBGA
256
Com
20
LFE2M20SE-6F256C
140
1.2V
-6
fpBGA
256
Com
20
LFE2M20SE-7F256C
140
1.2V
-7
fpBGA
256
Com
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35SE-5F672C
Part Number
410
1.2V
-5
fpBGA
672
Com
35
LFE2M35SE-6F672C
410
1.2V
-6
fpBGA
672
Com
35
LFE2M35SE-7F672C
410
1.2V
-7
fpBGA
672
Com
35
LFE2M35SE-5F484C
303
1.2V
-5
fpBGA
484
Com
35
LFE2M35SE-6F484C
303
1.2V
-6
fpBGA
484
Com
35
LFE2M35SE-7F484C
303
1.2V
-7
fpBGA
484
Com
35
LFE2M35SE-5F256C
140
1.2V
-5
fpBGA
256
Com
35
LFE2M35SE-6F256C
140
1.2V
-6
fpBGA
256
Com
35
LFE2M35SE-7F256C
140
1.2V
-7
fpBGA
256
Com
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50SE-5F900C
Part Number
410
1.2V
-5
fpBGA
900
Com
50
LFE2M50SE-6F900C
410
1.2V
-6
fpBGA
900
Com
50
LFE2M50SE-7F900C
410
1.2V
-7
fpBGA
900
Com
50
LFE2M50SE-5F672C
372
1.2V
-5
fpBGA
672
Com
50
LFE2M50SE-6F672C
372
1.2V
-6
fpBGA
672
Com
50
LFE2M50SE-7F672C
372
1.2V
-7
fpBGA
672
Com
50
LFE2M50SE-5F484C
270
1.2V
-5
fpBGA
484
Com
50
LFE2M50SE-6F484C
270
1.2V
-6
fpBGA
484
Com
50
LFE2M50SE-7F484C
270
1.2V
-7
fpBGA
484
Com
50
5-20
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M70SE-5F1152C
Part Number
436
1.2V
-5
fpBGA
1152
Com
70
LFE2M70SE-6F1152C
436
1.2V
-6
fpBGA
1152
Com
70
LFE2M70SE-7F1152C
436
1.2V
-7
fpBGA
1152
Com
70
LFE2M70SE-5F900C
416
1.2V
-5
fpBGA
900
Com
70
LFE2M70SE-6F900C
416
1.2V
-6
fpBGA
900
Com
70
LFE2M70SE-7F900C
416
1.2V
-7
fpBGA
900
Com
70
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M100SE-5F1152C
520
1.2V
-5
fpBGA
1152
Com
100
LFE2M100SE-6F1152C
520
1.2V
-6
fpBGA
1152
Com
100
LFE2M100SE-7F1152C
520
1.2V
-7
fpBGA
1152
Com
100
LFE2M100SE-5F900C
416
1.2V
-5
fpBGA
900
Com
100
LFE2M100SE-6F900C
416
1.2V
-6
fpBGA
900
Com
100
LFE2M100SE-7F900C
416
1.2V
-7
fpBGA
900
Com
100
5-21
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Industrial
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20SE-5F484I
Part Number
304
1.2V
-5
fpBGA
484
Ind
20
LFE2M20SE-6F484I
304
1.2V
-6
fpBGA
484
Ind
20
LFE2M20SE-5F256I
140
1.2V
-5
fpBGA
256
Ind
20
LFE2M20SE-6F256I
140
1.2V
-6
fpBGA
256
Ind
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35SE-5F672I
410
1.2V
-5
fpBGA
672
Ind
35
LFE2M35SE-6F672I
410
1.2V
-6
fpBGA
672
Ind
35
LFE2M35SE-5F484I
303
1.2V
-5
fpBGA
484
Ind
35
LFE2M35SE-6F484I
303
1.2V
-6
fpBGA
484
Ind
35
LFE2M35SE-5F256I
140
1.2V
-5
fpBGA
256
Ind
35
LFE2M35SE-6F256I
140
1.2V
-6
fpBGA
256
Ind
35
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50SE-5F900I
Part Number
410
1.2V
-5
fpBGA
900
Ind
50
LFE2M50SE-6F900I
410
1.2V
-6
fpBGA
900
Ind
50
LFE2M50SE-5F672I
372
1.2V
-5
fpBGA
672
Ind
50
LFE2M50SE-6F672I
372
1.2V
-6
fpBGA
672
Ind
50
LFE2M50SE-5F484I
270
1.2V
-5
fpBGA
484
Ind
50
LFE2M50SE-6F484I
270
1.2V
-6
fpBGA
484
Ind
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
436
1.2V
-5
fpBGA
1152
Ind
70
Part Number
LFE2M70SE-5F1152I
LFE2M70SE-6F1152I
436
1.2V
-6
fpBGA
1152
Ind
70
LFE2M70SE-5F900I
416
1.2V
-5
fpBGA
900
Ind
70
LFE2M70SE-6F900I
416
1.2V
-6
fpBGA
900
Ind
70
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
520
1.2V
-5
fpBGA
1152
Ind
100
Part Number
LFE2M100SE-5F1152I
LFE2M100SE-6F1152I
520
1.2V
-6
fpBGA
1152
Ind
100
LFE2M100SE-5F900I
416
1.2V
-5
fpBGA
900
Ind
100
LFE2M100SE-6F900I
416
1.2V
-6
fpBGA
900
Ind
100
5-22
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
LatticeECP2M S-Series Devices, Lead-Free Packaging
Commercial
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20SE-5FN484C
304
1.2V
-5
Lead-Free fpBGA
484
Com
20
LFE2M20SE-6FN484C
304
1.2V
-6
Lead-Free fpBGA
484
Com
20
LFE2M20SE-7FN484C
304
1.2V
-7
Lead-Free fpBGA
484
Com
20
LFE2M20SE-5FN256C
140
1.2V
-5
Lead-Free fpBGA
256
Com
20
LFE2M20SE-6FN256C
140
1.2V
-6
Lead-Free fpBGA
256
Com
20
LFE2M20SE-7FN256C
140
1.2V
-7
Lead-Free fpBGA
256
Com
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35SE-5FN672C
Part Number
410
1.2V
-5
Lead-Free fpBGA
672
Com
35
LFE2M35SE-6FN672C
410
1.2V
-6
Lead-Free fpBGA
672
Com
35
LFE2M35SE-7FN672C
410
1.2V
-7
Lead-Free fpBGA
672
Com
35
LFE2M35SE-5FN484C
303
1.2V
-5
Lead-Free fpBGA
484
Com
35
LFE2M35SE-6FN484C
303
1.2V
-6
Lead-Free fpBGA
484
Com
35
LFE2M35SE-7FN484C
303
1.2V
-7
Lead-Free fpBGA
484
Com
35
LFE2M35SE-5FN256C
140
1.2V
-5
Lead-Free fpBGA
256
Com
35
LFE2M35SE-6FN256C
140
1.2V
-6
Lead-Free fpBGA
256
Com
35
LFE2M35SE-7FN256C
140
1.2V
-7
Lead-Free fpBGA
256
Com
35
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50SE-5FN900C
Part Number
410
1.2V
-5
Lead-Free fpBGA
900
Com
50
LFE2M50SE-6FN900C
410
1.2V
-6
Lead-Free fpBGA
900
Com
50
LFE2M50SE-7FN900C
410
1.2V
-7
Lead-Free fpBGA
900
Com
50
LFE2M50SE-5FN672C
372
1.2V
-5
Lead-Free fpBGA
672
Com
50
LFE2M50SE-6FN672C
372
1.2V
-6
Lead-Free fpBGA
672
Com
50
LFE2M50SE-7FN672C
372
1.2V
-7
Lead-Free fpBGA
672
Com
50
LFE2M50SE-5FN484C
270
1.2V
-5
Lead-Free fpBGA
484
Com
50
LFE2M50SE-6FN484C
270
1.2V
-6
Lead-Free fpBGA
484
Com
50
LFE2M50SE-7FN484C
270
1.2V
-7
Lead-Free fpBGA
484
Com
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M70SE-5FN1152C
Part Number
436
1.2V
-5
Lead-Free fpBGA
1152
Com
70
LFE2M70SE-6FN1152C
436
1.2V
-6
Lead-Free fpBGA
1152
Com
70
LFE2M70SE-7FN1152C
436
1.2V
-7
Lead-Free fpBGA
1152
Com
70
LFE2M70SE-5FN900C
416
1.2V
-5
Lead-Free fpBGA
900
Com
70
LFE2M70SE-6FN900C
416
416
-6
Lead-Free fpBGA
900
Com
70
LFE2M70SE-7FN900C
416
416
-7
Lead-Free fpBGA
900
Com
70
5-23
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M100SE-5FN1152C
520
1.2V
-5
Lead-Free fpBGA
1152
Com
100
LFE2M100SE-6FN1152C
520
1.2V
-6
Lead-Free fpBGA
1152
Com
100
LFE2M100SE-7FN1152C
520
1.2V
-7
Lead-Free fpBGA
1152
Com
100
LFE2M100SE-5FN900C
416
1.2V
-5
Lead-Free fpBGA
900
Com
100
LFE2M100SE-6FN900C
416
1.2V
-6
Lead-Free fpBGA
900
Com
100
LFE2M100SE-7FN900C
416
1.2V
-7
Lead-Free fpBGA
900
Com
100
5-24
Ordering Information
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Industrial
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M20SE-5FN484I
Part Number
304
1.2V
-5
Lead-Free fpBGA
484
Ind
20
LFE2M20SE-6FN484I
304
1.2V
-6
Lead-Free fpBGA
484
Ind
20
LFE2M20SE-5FN256I
140
1.2V
-5
Lead-Free fpBGA
256
Ind
20
LFE2M20SE-6FN256I
140
1.2V
-6
Lead-Free fpBGA
256
Ind
20
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M35SE-5FN672I
410
1.2V
-5
Lead-Free fpBGA
672
Ind
35
LFE2M35SE-6FN672I
410
1.2V
-6
Lead-Free fpBGA
672
Ind
35
LFE2M35SE-5FN484I
303
1.2V
-5
Lead-Free fpBGA
484
Ind
35
LFE2M35SE-6FN484I
303
1.2V
-6
Lead-Free fpBGA
484
Ind
35
LFE2M35SE-5FN256I
140
1.2V
-5
Lead-Free fpBGA
256
Ind
35
LFE2M35SE-6FN256I
140
1.2V
-6
Lead-Free fpBGA
256
Ind
35
Part Number
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M50SE-5FN900I
Part Number
410
1.2V
-5
Lead-Free fpBGA
900
Ind
50
LFE2M50SE-6FN900I
410
1.2V
-6
Lead-Free fpBGA
900
Ind
50
LFE2M50SE-5FN672I
372
1.2V
-5
Lead-Free fpBGA
672
Ind
50
LFE2M50SE-6FN672I
372
1.2V
-6
Lead-Free fpBGA
672
Ind
50
LFE2M50SE-5FN484I
270
1.2V
-5
Lead-Free fpBGA
484
Ind
50
LFE2M50SE-6FN484I
270
1.2V
-6
Lead-Free fpBGA
484
Ind
50
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M70SE-5FN1152I
436
1.2V
-5
Lead-Free fpBGA
1152
Ind
70
LFE2M70SE-6FN1152I
436
1.2V
-6
Lead-Free fpBGA
1152
Ind
70
LFE2M70SE-5FN900I
416
1.2V
-5
Lead-Free fpBGA
900
Ind
70
LFE2M70SE-6FN900I
416
1.2V
-6
Lead-Free fpBGA
900
Ind
70
I/Os
Voltage
Grade
Package
Pins
Temp.
LUTs (K)
LFE2M100SE-5FN1152I
520
1.2V
-5
Lead-Free fpBGA
1152
Ind
100
LFE2M100SE-6FN1152I
520
1.2V
-6
Lead-Free fpBGA
1152
Ind
100
LFE2M100SE-5FN900I
416
1.2V
-5
Lead-Free fpBGA
900
Ind
100
LFE2M100SE-6FN900I
416
1.2V
-6
Lead-Free fpBGA
900
Ind
100
Part Number
Part Number
5-25
LatticeECP2/M Family Data Sheet
Supplemental Information
September 2006
Data Sheet DS1006
For Further Information
A variety of technical notes for the LatticeECP2 family are available on the Lattice web site at www.latticesemi.com.
•
•
•
•
•
•
•
LatticeECP2M SERDES/PCS Usage Guide (TN1124)
LatticeECP2/M sysIO Usage Guide (TN1102)
LatticeECP2/M sysCLOCK PLL Design and Usage Guide (TN1103)
LatticeECP2/M Memory Usage Guide (TN1104)
LatticeECP2/M High-Speed I/O Interface (TN1105)
Power Estimation and Management for LatticeECP2/M Devices (TN1106)
LatticeECP2/M sysDSP Usage Guide (TN1107)
• LatticeECP2/M sysCONFIG Usage Guide (TN1108)
• LatticeECP2/M Configuration Encryption Usage Guide (TN1109)
• LatticeECP2/M Soft Error Detection (SED) Usage Guide (TN1113)
For further information about interface standards refer to the following web sites:
• JEDEC Standards (LVTTL, LVCMOS, SSTL, HSTL): www.jedec.org
• PCI: www.pcisig.com
© 2006 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
6-1
DS1006 Further Info_01.0
LatticeECP2/M Family Data Sheet
Revision History
August 2008
Date
Data Sheet DS1006
Version
Section
February 2006
01.0
—
August 2006
01.1
Introduction
Change Summary
Initial release.
Updated Table 1-1 “LatticeECP2 Family Selection Guide”
Architecture
Updated figure 2-2 “PFU Diagram”
Updated figure 2-13 “Secondary Clock Regions ECP2-50”
Updated figure 2-25 “PIC Diagram”
Updated figure 2-26 “Input Register Block for Left, Right and Bottom
Edges”
Updated figure 2-28 “Output Register Block for Left, Right and Bottom
Edges”
Updated figure 2-30 “DQS Input Routing for Left and Right Edges”
Updated figure 2-32 “Edge Clock, DLL Calibration and DQS Local Bus
Distribution”
Table 2-15 Selectable Master clock (CCLK) frequencies Removed frequencies 15,20,21,22,23,30,34,41,45,51,55,60
Replaced “CLKINDEL” with “CLKO”
Updated SED section
Qualified device migration capability when using DQS banks for DDR
interfaces
DC and Switching
Characteristics
Added VCCPLL to the Recommended Operating Conditions Table
Remove Note 5 from “Hot Specifications” section
Added note 7 & 8 to “Initialization Supply current Table
Change Note 6 - “...down to 95MHz” to “...down to 95MHz for DDR and
133MHz for DDR2”
New “Typical Building Block Function Performance” numbers
New External Switching Characteristics numbers
New Internal Switching Characteristics numbers
New Family Timing Adders numbers
Updated Timings for GPLLs, SPLLs and DLLs
Added sysConfig waveforms.
Remove HSTL15D_II from sysIO Recommended Operating Condition
Table
Updated Supply and initialization currents for ECP2-50
Pinout Information
Added VCCPLL to the Signal Descriptions Table
Updated Logic signal Connections tables to include 484-fpBGA for the
ECP2-50.
Added Logic signal Connections tables for ECP2-12 devices.
Updated Pin Information Summary table to include ECP2-12.
Updated Power Supply and NC Connections table to include ECP2-12.
Added Note 2 to DDR Strobe (DQS) Pin Table
Added Information on: PCI, DDR & SPI4.2 Capabilities of the devicePackage combination
© 2008 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand
or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
www.latticesemi.com
7-1
DS1006 Revision History
Revision History
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Date
Version
Section
August 2006
(cont.)
01.1
(cont.)
Pinout Information
(cont.)
Ordering Information
Change Summary
Added Information on: Available Device Resources per Packaged
Device table
Updated ordering part number table to include ECP2-12.
Updated topside mark drawing
September 2006
02.0
Multiple
September 2006
02.1
DC and Switching
Characteristics
Added information regarding LatticeECP2M support throughout.
Added Receiver Total Jitter Tolerance Specification table.
Removed power-up requirements for proper configuration footnote in
Recommended Operating Conditions table.
December 2006
02.2
Introduction
Architecture
LatticeECP2M Selection Guide table has been updated.
Figure 2-16. Per Region Secondary Clock Selection has been updated.
Figure 2-39. Simplified Channel Block Diagram for SERDES and PCS
has been updated.
DC and Switching
Footnotes have been added to Recommended Operating Conditions
DC Electrical Characteristics table has been updated.
Supply Current (Standby) tables have been updated.
Initialization Supply Current table have been updated.
Updated timing numbers to include LFE2-12E (rev A 0.08)
Pinout Information
Updated to include the entire ECP2 device information as well as 256fpBGA and 484-fpBGA pin information for the ECP2M35E.
Ordering Information
Updated to include the entire ECP2 and ECP2M device ordering information.
February 2007
02.3
Architecture
March 2007
02.4
DC and Switching
Characteristics
March 2007
02.5
Introduction
Added “Security Series” to the LatticeECP2 and LatticeECP2M
families.
Architecture
Enhanced Configuration Option section updated.
DC and Switching
Ordering Information
April 2007
02.6
Introduction
Ordering Information
July 2007
August 2007
02.7
02.8
Architecture
Updated EBR Asynchronous Reset section.
Power-sequencing footnotes have been added to the Recommended
Operating Conditions. DDR2 performance has been updated to
266MHz.
Recommended Operating Conditions table - footnote 4 updated.
“Security Series” ordering part numbers added.
LatticeECP2M family table has been updated for user I/O counts.
LatticeECP2M family ordering part number section has been updated to
add 1152-fpBGA package for the ECP2M70 and ECP2M100.
Updated text in Ripple Mode section.
DC and Switching
ECP2/M Supply Current information has been updated.
Typical Building Block Function Performance, External Switching Characteristics, Internal Switching Characteristics, Family Timing Adders,
sysCLOCK GPLL Timing, sysCLOCK SPLL Timing, DLL Timing and
sysCONFIG Port Timing Specifications have been updated (timing rev.
A 0.10).
SERDES timing information has been updated.
PCI Express timing information has been updated.
Pinout Information
Added LatticeECP2M20 pinout information.
Introduction
1156-fpBGA package option has been removed from the LatticeECP2M
family.
Architecture
Table 2-16. Selectable Master Clock (CCLK) Frequencies During Configuration table has been updated.
DC and Switching
Supply Current (Standby) table has been updated.
DSP Function timing has been updated.
7-2
Revision History
LatticeECP2/M Family Data Sheet
Lattice Semiconductor
Date
Version
Section
August 2007
(cont.)
02.8
(cont.)
DC and Switching
(cont.)
sysCLOCK GPLL timing has been updated.
Pinout Information
Added ECP2M50 (484/672/900-fpBGA), ECP2M70 (900-fpBGA) and
ECP2M100 (900-fpBGA) pinout information.
Ordering Information
September 2007
02.9
Pinout Information
February 2008
03.0
Architecture
DC and Switching
Change Summary
1156-fpBGA package option has been removed from the LatticeECP2M
family.
Added Thermal Management text section.
Added LVCMOS33D description.
LatticeECP2M Supply Current has been updated.
Typical Building Block Function Performance, External Switching
Characteristics, Internal Switching Characteristics, Family Timing
Adders, sysCLOCK GPLL Timing, sysCLOCK SPLL Timing, DLL Timing and sysCONFIG Port Timing Specifications have been updated (timing rev. A 0.11).
Figure 3-9. Read/Write Mode (Normal) and Figure 3-10. Read/Write
Mode with Input and Output Registers have been updated.
Table 3-8. Channel output Jitter (Max) has been updated.
Pinout Information
Signal description has been updated.
Added 1152-fpBGA pinouts for the ECP2M70 and ECP2M100.
April 2008
03.1
Pinout Information
Available DDR Interfaces per I/O Bank for the LFE2M35 (484/672fpBGA) have been updated.
June 2008
03.2
Introduction
Family Selection Guide table - Updated number of EBR SRAM Blocks
for the ECP2-70 device.
Architecture
Removed Read-Before-Write sysMEM EBR mode.
Clarification of the operation of the secondary clock regions.
DC and Switching
Characteristics
August 2008
03.3
Architecture
Pinout Information
Removed Read-Before-Write sysMEM EBR mode.
Clarification of the operation of the secondary clock regions.
Added information for [LOC]DQ[num] to Signal Descriptions table.
7-3
Similar pages