Part Number: www.SunLED.com DUG46A 44.5mm (1.8") SINGLE DIGIT NUMERIC DISPLAY Features ● 1.75 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● I.C. COMPATIBLE. ● CATEGORIZED FOR LUMINOUS INTENSITY. ● MECHANICALLY RUGGED. ● STANDARD : GRAY FACE, WHITE SEGMENT. ● RoHS COMPLIANT. Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UG (GaP) Unit UG (GaP) Unit Forward Voltage (Typ.) (IF=10mA) Per Segment Or (Dp ) VF 6.0(2.0) V Forward Voltage (Max.) (IF=10mA) Per Segment Or (Dp ) VF 7.5(2.5) V Reverse Voltage Per Segment Or (Dp) VR 15(5) V Forward Current Per Segment Or (Dp) IF 25 mA Reverse Current (Max.) (VR=15V(5V)) Per Segment Or (Dp ) IR 10 uA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Per Segment Or (Dp) iFS 140 mA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 565 nm Power Dissipation Per Segment Or (Dp) PT 187.5(62.5) mW Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 568 nm Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number DUG46A Emitting Color Green Published Date : MAR 03, 2008 °C 260°C For 3 –5 Seconds Emitting Material GaP Luminous Intensity (IF=10mA) ucd min. typ. 3000 11990 Drawing No : SDSA2156 Wavelength nm λP Description 565 Common Anode, Rt. Hand Decimal V3 Checked : Shin Chi P.1/5 Part Number: www.SunLED.com DUG46A 44.5mm (1.8") SINGLE DIGIT NUMERIC DISPLAY UG Published Date : MAR 03, 2008 Drawing No : SDSA2156 V3 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com Published Date : MAR 03, 2008 DUG46A 44.5mm (1.8") SINGLE DIGIT NUMERIC DISPLAY Drawing No : SDSA2156 V3 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com DUG46A 44.5mm (1.8") SINGLE DIGIT NUMERIC DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 03, 2008 Drawing No : SDSA2156 V3 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com 44.5mm (1.8") SINGLE DIGIT NUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 03, 2008 DUG46A DUG46A Drawing No : SDSA2156 V3 Checked : Shin Chi P.5/5