EPCOS B65803A0000R026 Ferrites and accessory Datasheet

Ferrites and Accessories
Series/Type:
RM 4
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65803A0000R026
B65803A0000R048
Date of
Withdrawal
2002-08-02
Deadline Last
Orders
2002-12-31
Last Shipments
2003-03-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
RM 4
Core
B65803
■ In accordance with IEC 60431
■ Core without center hole
for transformer applications
■ RM cores are supplied in sets
Magnetic characteristics (per set)
Σl/A
le
Ae
A min
Ve
with
center hole
without
center hole
1,9
21
11

232
1,7
22
13
11,3
286
mm–1
mm
mm2
mm2
mm3
1,65
g
Approx. weight (per set)
m
1,45
Gapped
Material
AL value
nH
K1
M33
N48
s
approx.
mm
µe
Ordering code 1)
-A with center hole
-N with threaded sleeve
16 ± 3 %
1,0
24,2
B65803-+16-A1
25 ± 3 %
0,40
37,8
B65803-+25-A1
40 ± 3 %
0,36
60,4
B65803-+40-A33
63 ± 3 %
0,18
95
B65803-+63-A33
63 ± 3 %
0,16
95
B65803-+63-A48
100 ± 3 %
0,10
151
B65803-+100-A48
160 ± 3 %
0,06
242
B65803-+160-A48
1) Replace the + by the code letter “A” or “N” for the required version.
184 08/01
RM 4
Core
B65803
Ungapped
Material
AL value
µe
nH
A L1min P V
Ordering code
nH
-J w/o center hole
W/set
N30
1900 + 30/– 20 % 2570
B65803-J-R30
T35
2800 + 40/– 30 % 3790
B65803-J-Y35
T38
3700 + 40/– 30 % 5000
B65803-J-Y38
T57 1)
1600 + 30/– 20 % 2200
B65803-J-R57
B65803-J-R49
N49
750 + 30/– 20 % 1010
450
< 0,04
(50 mT, 500 kHz, 100 °C)
N87
1100 + 30/– 20 % 1480
650
B65803-J-R87
< 0,20
(200 mT, 100 kHz, 100 °C)
N97 1)
1100 + 30/– 20 % 1480
650
B65803-J-R97
< 0,15
(200 mT, 100 kHz, 100 °C)
1) Preliminary data
185 08/01
RM 4
Accessories
B65804
Coil former
Material:
GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085:
H max. operating temperature 180 °C), color code blue
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Winding:
see “Processing Notes”, page 153
Pins squared in the start-of-winding area
For matching clamp and insulating washers see page 187
Sections
AN
mm2
lN
mm
A R value
µΩ
Pins
Ordering code
1
7,7
20
89
5
B65804-K1005-D1
7,3
20
5 pins
5
4
6
1
2
5
4
ø4,9 _ 0,1
B65804-K1006-D2
6,88 _ 0,1
1
2
3
ø7,9 _ 0,2
0,45 max.
4,4±0,3
0,45±0,05
6
1
3
0,65±0,05
B65804-K1005-D2
+0,
6
5
ø0,52
Hole arrangement
Lochgrupppen
View in
mounting direction
Ansicht
in Montagerichtung
ø1+0,1
Erdungspunkte
ø1,3+0,1
Ground Ø 1,3+0,1
2,54
7,63 _ 0,1
B65804-K1006-D1
5
6 pins
0,6
,1
+0
94
0,44±0,05
2
6
FRM0230-U
186 08/01
50
_ 10
RM 4
B65804
Accessories
B65806
Clamp
■ With ground terminal, made of stainless spring steel (tinned), 0,335 mm thick
■ Solderability to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
■ Also available as strip clamp on reels
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,06 mm thick
Insulating washer 2 for double-clad PCBs
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,3 mm thick
Ordering code
Clamp (ordering code per piece, 2 are required)
B65806-A2203
Insulating washer 1 (reel packing, PU = 1 reel)
B65804-A5000
Insulating washer 2 (bulk)
B65804-C2005
Insulating washer 1
Insulating washer 2
8,3+0,15
2,4 max.
_ 0,3
4,5 +0,1
0,55 _ 0,15
9,3+0,2
0,55 _ 0,15
Clamp
0,7
FRM0012-J
Clamping forces for RM 4
Fmin: Extension of clamp from a to a2 = Xmin
Fmax: Extension of clamp from a to a 1 = Xmax
Clamp opening a (mm)
8,3 + 0,15
Core nose Zmax (mm)
0,15
Height of core pair X (mm) X min
X max
8,75
9,25
Clamping force F (N)
187 08/01
Fmin
Fmax
5
40
RM 4
B65539
Accessories
B63399
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core RM 4
Adjusting screw
Material
Tube core
∅ × length
mm
Material
Color
code
1,81 × 2,0
Si 1
black
20
AL value
nH
Min.
adjusting
range
Ordering code
%
B65539-C1003-X101
K1
16
25
1,81 × 2,0
K1
yellow
21
B65539-C1003-X1
M 33
40
1,81 × 2,0
Si 1
black
17
B65539-C1003-X101
63
1,81 × 2,0
K1
yellow
21
B65539-C1003-X1
N 48
63
1,81 × 2,0
Si 1
black
12
B65539-C1003-X101
100
1,81 × 2,0
K1
yellow
17
B65539-C1003-X1
160
1,81 × 2,7
N 22
red
12
B65539-C1002-X22
Adjusting screwdriver
B63399-B4
Handle
B63399-B5
Adjusting screw
188 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
Similar pages