SPICE MODEL: GBJ2510 GBJ25005 - GBJ2510 25A GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass Passivated Die Construction · Lead Free Finish/RoHS Compliant (Note 4) High Case Dielectric Strength of 1500VRMS GBJ Low Reverse Leakage Current · · · · · · · · Min Max A 29.70 30.30 L B 19.70 20.30 M C 17.00 18.00 D 3.80 4.20 Ideal for Printed Circuit Board Applications UL Listed Under Recognized Component Index, File Number E94661 A K B Mechanical Data · · Dim Surge Overload Rating to 350A Peak S _ Case: GBJ N J Case Material: Molded Plastic. UL Flammability Classification 94V-0 C R Moisture Sensitivity: Level 1 per J-STD-020C Lead Free Plating (Tin Finish). G Polarity: Molded on Body E 7.70 9.80 10.20 H 2.00 2.40 I 0.90 1.10 J 2.30 2.70 3.0 X 45° K I Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208 e3 7.30 P D H E G E L 4.40 4.80 M 3.40 3.80 N 3.10 3.40 Mounting: Through Hole for #6 Screw P 2.50 2.90 Mounting Torque: 5.0 in-lbs Maximum R 0.60 0.80 Marking: Type Number S 10.80 11.20 Weight: 6.6 grams (approximate) All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol GBJ 25005 GBJ 2501 GBJ 2502 GBJ 2504 GBJ 2506 GBJ 2508 GBJ 2510 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Forward Rectified Output Current (Note 1) @ TC = 100°C Non-Repetitive Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load IO 25 A IFSM 350 A Forward Voltage (per element) @ IF = 12.5A VFM 1.05 V Peak Reverse Current at Rated DC Blocking Voltage @ TC = 25°C @ TC = 125°C IR 10 500 µA I2 t 510 A2 s I2t Rating for Fusing (t < 8.3ms) (Note 1) Typical Total Capacitance (per element) (Note 2) Typical Thermal Resistance Junction to Case (Note 3) Operating and Storage Temperature Range Notes: CT 85 pF RqJC 0.6 °C/W Tj, TSTG -65 to +150 °C 1. Non-repetitive, for t > 1ms and < 8.3 ms. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. Thermal resistance from junction to case per element. Unit mounted on 220 x 220 x 1.6mm aluminum plate heat sink. 4. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21221 Rev. 7 - 2 1 of 3 www.diodes.com GBJ25005 - GBJ2510 ã Diodes Incorporated with heatsink 25 20 15 10 without heatsink 5 Resistive or Inductive load 0 25 50 75 100 125 100 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 30 150 Tj = 25°C 10 1.0 0.1 0.01 0 0.4 0.8 1.2 2.0 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve TJ = 25°C 400 f = 1MHz Tj = 25°C CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 1000 Single half-sine-wave 300 200 100 100 0 1 1 100 10 10 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current 1000 Tj = 150°C Tj = 125°C 100 Tj = 100°C 10 1.0 Tj = 25°C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS21221 Rev. 7 - 2 2 of 3 www.diodes.com GBJ25005 - GBJ2510 Ordering Information Notes: (Note 5) Device Packaging Shipping GBJ25005-F GBJ 15/Tube GBJ2501-F GBJ 15/Tube GBJ2502-F GBJ 15/Tube GBJ2504-F GBJ 15/Tube GBJ2506-F GBJ 15/Tube GBJ2508-F GBJ 15/Tube GBJ2510-F GBJ 15/Tube 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21221 Rev. 7 - 2 3 of 3 www.diodes.com GBJ25005 - GBJ2510