Document 287 -1 SMT Power Inductor - MOS6020 Series Measuring a mere 2 mm high, the MOS6020 family of surface mount power inductors offers exceptionally low DC resistance and excellent current handling. These magnetically shielded inductors are extremely space-efficient, with a 6 × 7.1 mm footprint. They are available in inductance values from 2.2 µH to 470 µH with saturation current ratings up to 2.15 Amps. Custom versions up to 4.7 mH are also available. Free evaluation samples are available by contacting Coilcraft or ordering them on-line at www.coilcraft.com. Part number1 MOS6020-222MX_ MOS6020-332MX_ MOS6020-472MX_ MOS6020-682MX_ MOS6020-103MX_ MOS6020-153MX_ MOS6020-223MX_ MOS6020-333MX_ MOS6020-473MX_ MOS6020-683MX_ MOS6020-104MX_ MOS6020-154MX_ MOS6020-224MX_ MOS6020-334MX_ MOS6020-474MX_ L ±20%2 DCR max SRF typ3 2 Isat4 4Irms5 (µH) (Ohms) (MHz) (A) (A) 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 0.035 0.046 0.050 0.078 0.092 0.130 0.182 0.290 0.420 0.520 0.800 1.28 2.00 2.84 4.40 110 85 60 55 36 30 22 20 16 15 13 10 8 7 5 2.15 1.80 1.50 1.28 1.00 0.85 0.72 0.58 0.49 0.40 0.33 0.27 0.22 0.18 0.15 4.1 3.6 3.1 2.7 2.2 1.8 1.4 1.1 0.7 0.63 0.56 0.49 0.42 0.35 0.29 1. When ordering, please specify packaging code: MOS6020-104MXC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/ HP 4284A or equivalent. 3. SRF measured using Agilent/HP 8753D network analyzer. 4. DC current at which the inductance drops 30% (typ) from its value without current. 5. Average current for 40°C temperature rise from 25°C ambient. 6. Operating temperature range -40°C to +85°C. 7. Electrical specifications at 25°C. See Qualification Standards section for environmental and test data. Specifications subject to change without notice. Document 287-1 Revised 07/30/04 Document 287-2 SMT Power Inductors - MOS6020 Series Typical L vs Frequency Typical L vs Current 10000 1000 Inductance (µH) 470 µH 100 100 µH 10 10 µH 2.2 µH 1 0.1 0.1 1 10 Current (A) 0.28 max 7,1 0.030 typ 0,75 XXX 0.24 max 6,0 0.095 max 2,4 0.18 typ 4,5 0.280 min 7,10 0.170 max 4,32 0.100 min 2.54 Recommended Land Pattern Tape and reel: 500/7″ reel; 2000/13″ reel 16 mm tape width For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Document 287-2 Revised 07/30/04