AM-131-PIN
Product Type: Broadband RF Amplifier
Frequency: 5 to 500 MHz
Rev. V4
Product Image
Features
HIGH DYNAMIC RANGE: +116 dBm (1 MHz Band)
HIGH OUTPUT POWER: +19 dBm (TYP.)
HIGH THIRD ORDER I.P. + 34.0 dBm (TYP.)
LOW NOISE: 4.0 dB (TYP.)
Description
The AM-131-PIN RF amplifier is a discrete thin film hybrid
design, which incorporates the use of thin film manufacturing
processes for accurate performance and high reliability. This
single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband
frequency range. An active DC biasing network is used for
temperature-stable performance, in addition to an RF Choke,
used for power supply decoupling.
Ordering Information
Part Number
AM-131 PIN
Package
4
TO-8-1
4. Mounting kit part number AU00071 required for PCB applications.
Electrical Specifications: Z0 = 50, VCC = +15 VDC
Typical
Parameter
Absolute Maximum Ratings
Guaranteed
Units
25ºC
0º to 50ºC
-54º to +85ºC*
Frequency
MHz
5-500
5-500
5-500
Small Signal Gain (min)
dB
11.5
10.0
9.5
Gain Flatness (max)
dB
±0.3
±0.7
±1.0
Reverse Isolation
dB
16
Noise Figure (max)
dB
4.0
5.0
5.5
Power Output
@ 1 dB comp. (min)
dBm
19.0
18.0
17.5
IP3
dBm
+34
IP2
dBm
+48
Second Order Harmonic IP
dBm
+54
VSWR Input / Output (max)
DC Current @ 15 Volts (max)
mA
1.5:1 / 1.5:1
1.9:1 / 1.9:1
2.0:1 / 2.0:1
65
69
72
Parameter
Absolute
Maximum
Storage Temperature
-62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+17 V
Continuous Input Power
13 dBm
Short Term Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
Thermal Data: VCC = +15 VDC
Parameter
Rating
Thermal Resistance θjc
75ºC/W
Transistor Power Dissipation Pd
0.651 W
Junction Temperature Rise Above
Case Tjc
49ºC
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
AM-131-PIN
Product Type: Broadband RF Amplifier
Frequency: 5 to 500 MHz
Typical Performance Curves at +25°C
Rev. V4
Outline Drawing: TO-8-1
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
AM-131-PIN
Product Type: Broadband RF Amplifier
Frequency: 5 to 500 MHz
Rev. V4
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support