E L E C T R O N I C MUR3060PT Ultrafast Rectifier - 30Amp 600Volt □ Features -Epoxy Meets UL 94V-0 -Higjt Voltage Capability -Low Leakage Current -High Temperature Glass Passivated Junction -Pb-Free Packages is Available □ Mechanical Characteristics -Case: Epoxy, Molded -Weight: 1.9 grames(Approximately) -Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable -Lead Temperature for Soldering Purposes: 260 ºC Max for 10 Seconds □ Maximum ratings Rating Symbol Value Unit Peak Repetitive Reverse Voltage VRRM 600 V Average Rectified Forward Current Total Device(Rated VR), TC = 150 ºC IF(AV) 15 30 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20kHZ), TC = 150 ºC IFM 30 A Nonrepetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60HZ) IFSM 150 A Operating Junction Temperature and Storage Temperature Range TJ, Tstg -65 to +175 ºC Rating Symbol Value Unit Maximum Instantaneous Forward Voltage (Note 1) IF = 15A, TC = 150 ºC IF = 15A, TC = 25 ºC VF 1.15 1.3 V Maximum Instantaneous Reverse Current (Note 1) Rated DC Voltage, TJ = 150 ºC Rated DC Voltage, TJ = 25 ºC IR 1000 10 μA Maximum Reverse Recovery Time IF = 1.0A, di/dt = 50A/μs trr 50 ns Maximum Thermal Resistance, Junction-to-Case RθJC 1.5 ºC/W □ Electrical characteristics Note: 1.Pulse Test : Pulse Width = 300μs, Duty Cycle ≦ 2.0% http:// www.sirectsemi.com August 2007 / Rev.5 1 MUR3060PT 1000 Tj = 150 oC IR, REVERSE CURRENT (µA) 100 70 50 20 10 25 oC 1.0 0.1 5.0 0.01 100 200 300 400 500 600 VR, REVERSE VOLTAGE (VOLTS) 3.0 Figure 2. Typical Reverse Current 2.0 ºC 10 0 25 º 0.5 C 0.7 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 15 0º C 1.0 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage 10 dc RθJA = 16 oC/W 9.0 16 RATED VR APPLIED 14 12 dc 10 SQUARE WAVE 8.0 6.0 4.0 2.0 0 130 140 8.0 150 160 170 180 TC, CASE TEMPERATURE (oC) RθJA = 60 oC/W (NOT HEAT SINK) Figure 3. Current Derating, Case 7.0 SQUARE WAVE 6.0 5.0 16 4.0 dc 3.0 2.0 SQUARE WAVE 1.0 0 0 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (oC) Figure 4. Current Derating, Ambient 180 200 PF(AV), AVERAGE POWER DISSIPATION (WATTS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) 100 oC 10 7.0 Tj = IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 30 100 14 SQUARE WAVE 12 10 dc 8.0 6.0 4.0 Tj = 125 oC 2.0 0 0 2 4 6 8 10 12 14 16 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation http:// www.sirectsemi.com 2 MUR3060PT r(t), TRANSIENT THERMAL RESISTANCE 1 D = 0.5 0.5 0.1 0.05 ZθJC(t) = r(t)RθJC 0.1 PPK RθJC = 1.5oC/W MAX 0.01 0.05 D CURVES APPLY FOR POWER t1 PULSE TRAIN SHOWN t2 READ TIME AT T1 SINGLE PULSE DUTY CYCLE, D = t1/t2 TJ(pk) – TC = P(pk)ZθJC(t) 0.01 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 t, TIME (ms) Figure 6. Thermal Response 1000 C, CAPACITANCE, (pF) 500 Tj = 25 oC 200 100 50 20 10 1.0 5.0 10 50 100 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Capacitance http:// www.sirectsemi.com 3 MUR3060PT TO-247AD PACKAGE L C F E B I D H G O A M J K K N A1 K A2 DIM A B C D E F G H I J K L M N O DIMENSIONS INCHES MM MIN MAX MIN MAX .748 .826 19.00 21.00 .787 .866 20.00 22.00 .598 .638 15.20 16.20 .132 .150 3.35 3.80 .217 .242 5.50 6.15 .209 .232 5.30 5.90 .077 .087 1.95 2.20 .161 .177 4.10 4.50 .551 .610 14.00 15.50 .045 .055 1.15 1.40 .197 .219 5.00 5.55 .189 .205 4.80 5.20 .024 .031 0.60 0.80 .086 .095 2.20 2.40 .116 .128 2.95 3.25 NOTE Sirectifier Global Corp., Delaware, U.S.A. U.S.A.: [email protected] France: [email protected] Taiwan: [email protected] Hong Kong: [email protected] China: [email protected] …Thailand: [email protected] Philippines: [email protected] Belize: [email protected] http:// www.sirectsemi.com 4