Xeon 3 Power Red LED OSR5XAE3E1E VER C.0 ■Features ■Outline ● Highest Luminous Flux ● Super energy efficiency ● Long Lifetime Operation ● Superior UV Resistance Dimension ■Caution ● Avoid Reflow Soldering Process ■Applications ● Read lights (car, bus, aircraft) ● Portable (flashlight, bicycle) ● Bollards / Security / Garden ● Traffic signaling / Beacons ● In door / Out door Commercial lights ● Automotive Ext Unit:mm Tolerances are for reference only ■Absolute Maximum Rating Item (Ta=25℃) ■Directivity Symbol Value Unit DC Forward Current IF 800 mA Pulse Forward Current* IFP 1000 mA Reverse Voltage VR 5 V Power Dissipation PD 2400 mW Operating Temperature Topr -30 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Lead Soldering Temperature Tsol 260℃/5sec - Duty ratio max 1/10 ■Electrical -Optical Characteristics Item DC Forward Voltage 0 Symbol VF ■Forward Operating Current (DC) (Ta=25℃) Condition Min. Typ. Max. Unit IF=350mA 2.0 2.3 3.0 V IF=700mA 2.5 2.8 3.5 V DC Reverse Current IR VR=5V - - 10 µA Domi. Wavelength λD IF=700mA 620 625 630 nm Luminous Flux Φv IF=700mA 70 80 - lm 50% Power Angle 2θ1/2 IF=700mA - 140 - deg 800 Forward Current, IF (mA) *Pulse width Max.10ms 0 700 600 500 400 300 200 100 RJ-A=30℃/W RJ-A=25℃/W RJ-A=20℃/W RJ-A=15℃/W 0 0 25 50 75 100 125 Ambient Temperature, TA (℃) Note: Don’t drive at rated current more than 5s without heat sink for Xeon 3 emitter series. LED & Application Technologies http://www.optosupply.com VER C.0