Crystal oscillator Multi output SAW Oscillator (MOSO) OUTPUT : LVDS Product Number (please contact us) X1M000421xxxx00 MG7050VAN Feature Ultra Low jitter : 0.3 ps Max. 2 or 4 outputs and it is able to reduce fan-out buffers Frequency range : 100 MHz to 700 MHz Supply voltage : 2.5 V / 3.3 V External dimensions : 7.0 × 5.0 × 1.6 mm Output : LVDS (2 or 4 outputs) Application Server, Storage, Network Instrument. Actual size Specifications (characteristics) Item Symbol I_dis SYM VOD VOS L_LVDS VIH VIL tr/tf 200 ps Typ., 400 ps Max. f0 Supply voltage Storage temperature VCC T_stg Operating temperature T_use Frequency tolerance *1 f_tol Current consumption ICC Output voltage Output load condition Input voltage Rise time / Fall time Start-up time Conditions / Remarks 100 MHz to 700 MHz 100MHz, 106.25MHz, 125MHz, 150MHz, 156.25MHz, 200MHz, 212.5MHz, 250MHz, 300MHz, 312.5MHz D: 2.5 V ± 0.125 V C: 3.3 V ± 0.33 V -55 ºC to +125 ºC A: 0 ºC to +70 ºC, B: -20 ºC to +70 ºC D: -5 ºC to +85 ºC -6 -6 J: ±50 × 10 , L: ±100 × 10 35 mA Typ., 50 mA Max. 45 mA Typ., 56 mA Max. 40 mA Typ., 66 mA Max. 50 mA Typ., 72 mA Max. 7 mA Typ., 18 mA Max. 8 mA Typ., 20 mA Max. 45 % to 55 % 247 mV to 454 mV 1.125 V to 1.375 V 100 Ω 70% VCC Min. 30% VCC Max. Output frequency range Disable current Symmetry Specifications Please contact us about available frequencies. Standard frequency VCC,VCC1 and VCC2 need same voltage Store as bare product after packing 2-outputs OE=VCC, L_LVDS=100 Ω 4-outputs OE=GND At outputs crossing point DC characteristics Connected between OUTnP and OUTnN OE and FSEL terminals Between 20% and 80% of differential output peak to peak voltage Time at minimum supply voltage to be 0 s f0=100 MHz f0=125 MHz f0=156.25 MHz Offset frequency: f0=212.5 MHz 12 kHz to 20 MHz f0=312.5 MHz f0=700 MHz 5 ms Typ., 10 ms Max. 0.19 ps Typ. 0.16 ps Typ. 0.18 ps Typ. 0.15 ps Typ. 0.17 ps Typ. 0.14 ps Typ. Phase Jitter tPJ 0.15 ps Typ. 0.13 ps Typ. 0.12 ps Typ. 0.11 ps Typ. 0.06 ps Typ. 0.05 ps Typ. 0.3 ps Max. Skew t_skew 20 ps Typ., 50 ps Max. FSEL=H -6 First year N: ±10 × 10 / year Max. +25 C, VCC=2.5 V, 3.3 V Aging f_age A: Included in Frequency tolerance *2 10 years *1 Frequency tolerance includes initial frequency tolerance, temperature variation, supply voltage change and reflow drift. *2 “A” is not acceptable when Frequency tolerance is “J” and Operating temperature is “B” or “D”. Product Name (Standard form) t_str MG7050 V AN 156.250000MHz ① ② ③ 4 A C J A N ④ ⑤ ⑥ ⑦ ⑧ ⑨ (⑦⑧⑨:JDA, JBA are not available) ①Model ②Output (L: LVDS) ③Frequency ④Number of outputs（2: 2outputs, 4: 4outputs） ⑤"A": Fixed ⑥Supply voltage ⑦Frequency tolerance ⑧Operating temperature ⑨Frequency aging ⑥Supply voltage ⑦Frequency tolerance C D J L 3.3 V Typ. 2.5 V Typ. -6 ±50 × 10 -6 ±100 × 10 ⑧Operating temp. A B D 0 to +70°C -20 to +70°C -5 to +85°C ⑨Frequency aging A Frequency tolerance include aging N Frequency tolerance exclude aging Crystal oscillator Block diagram 2-outputs 4-outputs Vcc Vcc1 SAW SAW OSC Vcc Vcc1 Vcc1 Vcc1 SAW OUT1P OUT1N Divider1 SAW OSC Divider1 Vcc1 OUT2P OUT2N OE Vcc2 Vcc2 Vcc2 OUT2P OUT2N Divider2 FSEL OUT1P OUT1N FSEL Vcc2 Divider2 Vcc2 OE OUT3P OUT3N OUT4P OUT4N FSEL function 2-outputs 4-outputs FSEL OUT1 OUT2 OUT1 / OUT2 OUT3 / OUT4 H fo fo L fo fo/2 External dimensions (Unit :mm) Pin Connection 2-outputs 1 VCC1 2 GND OUT1P 3 OUT1P OUT1N 4 OUT1N OUT2P 5 GND OUT2N 6 FSEL 7 OE pin = “H” : Specified frequency output. OE pin = “L” : Output is high impedance #14 is connected to the cover. 4-outputs OE 8 GND OUT3N 9 OUT2N OUT3P 10 OUT2P OUT4N 11 GND OUT4P 12 VCC2 13 VCC 14 GND Footprint (Recommended) (Unit :mm) To maintain stable operation, provide a 0.01 μF to 0.1 µF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between VCC, VCC1, VCC2 - GND). PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Seiko Epson, all environmental initiatives operate under the Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO 14001 environmental management standard. All of our major manufacturing and non-manufacturing sites, in Japan and overseas, completed the acquisition of ISO 14001 certification. ISO 14000 is an international standard for environmental management that was established by the International Standards Organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Seiko Epson made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS16949 is the international standard that added the sector-specific supplemental requirements for automotive industry based on ISO9001. ►Explanation of the mark that are using it for the catalog ►Pb free. ►Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) ►Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc. ►Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ). Notice This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. The information about applied circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective. Seiko Epson Corporation