YFWDIODE GBJ606 Glass passivated single-phase bridge rectifier Datasheet

GBJ6005 THRU GBJ610
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
50 to 1000 VOLTS
6.0 AMPERE
REVERSE VOLTAGE:
FORWARD CURRENT:
FEATURES
GBJ
· Glass passivated chip junction
· Reliable low cost construction utilizing molded
plastic technique
· Ideal for printed circuit board
· Low forward voltage drop
· Low reverse leakage current
· High surge current capability
MECHANICAL DATA
Case: Molded plastic, GBJ
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-202,
method 208 guaranteed
Mounting position: Any
Dimensions in inches and (millimeters)
Weight: 0.23ounce, 6.6gram
Maximum Ratings and Electrical Characteristics
Ratings at 25 ℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60H Z, resistive or inductive load.
For capacitive load, derate current by 20%.
Symbols
GBJ6005
GBJ601
GBJ602
GBJ604
GBJ606
GBJ608
GBJ610
Units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward Rectified Current
with Heatsink at TC=110℃
I(AV)
6.0
Amp
IFSM
150
Amp
VF
1.0
Volts
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage Drop per Element
at 3.0A DC and 25℃
Maximum Reverse Current
at TA=25℃
at Rated DC Blocking Voltage
T A=125℃
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
IR
CJ
5.0
500
55
pF
RθJC
1.8
℃/W
TJ,Tstg
-55 to +150
℃
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal Resistance from Junction to Case with Device Mounted on 75mm x 75mm x 1.6mmCu Plate Heatsink.
www.yfwdiode.com
uAmp
GBJ6005 THRU GBJ610
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
RATINGS AND CHARACTERISTIC CURVES
www.yfwdiode.com
Similar pages