Document 479-1 SMT Power Inductors – DO5040H • Heavy gauge wire and self-leaded terminations for low DCR • Saturation current ratings as high as 33.4 A DCR SRF4 Inductance2 max typ Isat4 Irms5 Part number1 (µH) (mOhms) (MHz) (A) (A) DO5040H-282ML_ 2.8 ±20% 5.2 DO5040H-392ML_ 3.9 ±20% 6.0 DO5040H-682ML_ 6.8 ±20% 9.0 DO5040H-103ML_ 10 ±20% 11 DO5040H-123ML_ 12 ±20% 13 DO5040H-153ML_ 15 ±20% 20 DO5040H-183ML_ 18 ±20% 22 DO5040H-223ML_ 22 ±20% 24 DO5040H-333ML_ 33 ±20% 37 DO5040H-473ML_ 47 ±20% 52 DO5040H-683ML_ 68 ±20% 67 DO5040H-104ML_ 100 ±20% 115 DO5040H-334KL_ 330 ±10% 325 DO5040H-684KL_ 680 ±10% 780 DO5040H-145KL_ 1400 ±10% 1300 65 40 30 22 21 18 14 13 10 8.0 7.0 6.0 3.0 1.6 1.0 33.4 26.8 22.5 17.8 15.9 13.8 13.2 11.8 9.6 7.8 6.7 5.6 3.0 2.0 1.5 12.1 11.2 9.6 8.6 7.4 6.5 6.0 5.7 4.5 3.7 3.4 2.8 1.5 1.1 0.7 Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Weight 5.8 – 7.6 g (2.8 –12 µH); 5.7 – 7.0 g (15 –1400 µH) Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 175 per 13″ reel 2.8 –12 µH parts Plastic tape: 44 mm wide, 0.5 mm thick, 24 mm pocket spacing, 12.8 mm pocket depth 15 –1400 µH parts Plastic tape: 32 mm wide, 0.4 mm thick, 24 mm pocket spacing, 12.1 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. 1. When ordering, please specify termination and packaging codes: DO5040H-104MLD Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using Coilcraft SMD‑A fixture in Agilent/HP 4284A impedance analyzer. 3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMD‑D test fixture. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 479-1 Revised 10/14/08 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 479-2 SMT Power Inductors - DO5040H Series Typical L vs Current Typical L vs Frequency 1000 100 µH 100 Inductance (µH) Inductance (µH) 1000 33 µH 12 µH 10 100 µH 100 33 µH 12 µH 10 2.8 µH 2.8 µH 1 1 0.1 Current (A) 10 100 Current Derating 1 0.001 0.1 Frequency (MHz) 1 Internal code 0.500 12,7 0.640max 16,26 X 90 Dash number XXX 0.472 max 12,00 100 0.880 max 22,35 80 70 0.561 min 14,25 60 0.125 3,18 50 0.340 ±0.010 8,64 ±0,25 25°C 40 30 20 10 0 10 2.8 µH – 12 µH 120 110 Percent of rated current 0.01 Isat Irms -40 -20 0 20 40 60 80 100 120 0.450 max 11,43 0.470 11,94 0.690 17,53 0.125 max 3,18 0.815 max 20,70 140 Ambient temperature (°C) Recommended Land Pattern 15 µH – 1400 µH Internal Dash code number 0.500 12,7 X 0.600 max 15,24 XXX 0.472 max 12,00 0.730 max 18,54 0.200 max 5,08 0.561 min 14,25 0.075 1,90 0.250 6,35 0.065 max 1,65 0.710max 18,03 Dimensions are in 0.626 15,90 Recommended Land Pattern inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 479-2 Revised 10/14/08 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.