OM1323SMM OM1323NMM OM1323NKM OM1323NTM OM1323STM OM1323N2M 1.5 AMP NEGATIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703404 Three Terminal, Precision Adjustable Negative Voltage Regulator In Hermetic Style Packages (LM137HV) Please see mechanical outlines herein FEATURES • • • • • Similar To Industry Standard LM137HV Approved To DESC Standardized Military Drawing Number 7703404 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles DESCRIPTION These three terminal negative regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from -1.2 volts to -47 volts using external resistors. ABSOLUTE MAXIMUM RATINGS Tc @ 25°C Power Dissipation Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0°C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-1.2 to -47 VDC Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -4.25 to -51.25 VDC 4 11 R2 Supersedes 1 07 R1 3.5 - 13 3.5 OM1323NTM, OM1323STM, OM1323NKM, OM1323SMM, OM1323NMM, OM1323N2M ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1323NTM, OM1323STM, OM1323NKM, OM1323SMM, OM1323NMM Parameter Symbol Test Conditions Min. Max. Reference Voltage VREF VDIFF = 3.0V, TA = 25°C -1.275 -1.225 VDIFF = 3.0V • VDIFF = 50V, TA = 25°C VDIFF = 50V Line Regulation RLINE 3.0 V ≤ VDIFF ≤ 40V, TA = 25°C RLOAD VDIFF = 5.0V, 8mA ≤ IL ≤ 110mA (Note 1) Load Regulation (Note 1) • • • -1.20 -1.225 -1.30 -1.20 -10 10 -25 25 -25 25 -25 25 -45 45 -5 5 TA = 25°C • VRTH V mV mV VDIFF = 5V, 8mA ≤ IL ≤ 1.5A, TA = 25°C Thermal Regulation -1.30 -1.275 Unit Vin = -14.6V, IL = 1.5A mV Pd = 20 Watts, t = 10 ms, TA = 25°C Ripple Rejection RN f = 120 Hz, Vout = Vref IAdj VDIFF = 3.0V (Note 2) Adjustment Pin Current VDIFF ≤ 50V ∆IAdj VDIFF = 5V, 8mA ≤ IL ≤ 1.5A 3 V ≤ VDIFF ≤ 50V Current Change Miminum Load Current ILmin VDIFF = 3.0V, Vout = -1.4V (forced) VDIFF = 10V, Vout = -1.4V (forced) VDIFF = 40V, Vout = -1.4V (forced) VDIFF = 50V, Vout = -1.4V (forced) Current Limit 66 dB CAdj = 10 µF VDIFF = 40V Adjustment Pin • VDIFF ≤ 5V ICL • • • • • • • • • • VDIFF = 50V, TA = 25°C (Note 2) 100 -5 -6 100 µA 100 µA 5 6 µA 3.0 3.0 mA 5.0 5.0 1.5 3.5 0.2 1.0 A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The • denotes the specifications which apply over the full operating temperature range. PART NUMBER DESIGNATOR 3.5 Standard Military Drawing Number Omnirel Part Number 7703404M 7703404U 7703404T 7703404Y 7703404N 77034042 OM1323SMM OM1323STM OM1323NTM OM1323NKM OM1323NMM OM1323N2M 3.5 - 14 Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20 OM1323NTM, OM1323STM, OM1323NKM, OM1323SMM, OM1323NMM, OM1323N2M ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1323N2M Parameter Symbol Test Conditions Min. Max. Reference Voltage VREF VDIFF = 3.0V, TA = 25°C -1.275 -1.225 -1.30 -1.20 -1.275 -1.225 VDIFF = 3.0V • VDIFF = 40V, TA = 25°C VDIFF = 40V • VDIFF = 50V, TA = 25°C VDIFF = 50V Line Regulation • -1.20 -1.275 -1.225 -1.30 -1.20 -10 10 -25 25 -25 25 3.0 V ≤ VDIFF ≤ 40V, TA = 25°C RLINE (Note 1) Load Regulation -1.30 VDIFF = 5.0V, 8mA ≤ IL ≤ 100mA RLOAD (Note 1) • • TA = 25°C • VRTH V V mV mV VDIFF = 5V, 8mA ≤ IL ≤ 500 mA, TA = 25°C Thermal Regulation Unit Vin = -16.25V, IL = 330 mA -31 31 -50 50 -2 2 mV Pd = 5 Watts, t = 10 ms, TA = 25°C Ripple Rejection RN • f = 120 Hz, Vout = Vref (Note 2) 66 dB CAdj = 10 µF Adjustment Pin Current VDIFF = 3.0V IAdj VDIFF = 40V VDIFF ≤ 50V Adjustment Pin ∆IAdj VDIFF = 5V, 8mA ≤ IL ≤ 200 mA ILmin VDIFF = 3.0V, Vout = -1.4V (forced) 3 V ≤ VDIFF ≤ 50V Current Change Miminum Load Current VDIFF = 10V, Vout = -1.4V (forced) VDIFF = 40V, Vout = -1.4V (forced) VDIFF = 50V, Vout = -1.4V (forced) Current Limit VDIFF ≤ 5V ICL • • • • • • • • • • VDIFF = 50V, TA = 25°C (Note 2) 100 -5 -6 100 µA 100 µA 5 6 µA 3.0 3.0 mA 5.0 5.0 0.5 1.8 0.1 0.65 A Notes: Please see previous page. TYPICAL APPLICATIONS * Cin is required if regulator is located more than 4 inches from power supply filter. A 1 µF solid tantalum or 10 µF aluminum electrolytic is recommended. IPROG + CIN* + R2 1.0µF CO** R1 120Ω 1.0µF ** Co is necessary for stability. A 1 µF solid tantalum or 10 µF aluminum electrolytic is recommended. IAdj VIN -VIN VOUT OM1323STM -VOUT Vout = -1.25 V (1 +R2) R1 3.5 - 15 3.5 OM1323NTM, OM1323STM, OM1323NKM, OM1323SMM, OM1323NMM, OM1323N2M MECHANICAL OUTLINE .425N .200N .190N 1 N .045N .035N .100N .200N 3 N .420N .410N .425N .035 WIDEN FLAT 3 PLCS.N 2 .665N .645N .150N .140N .537N .527N N .350 MIN.N .430N .410N 1 2 3 N ± .020N .115N .160N .020N .080 N .038 MAX.N OM1323SMM .750N .500N .120 TYP.N .100 TYP.N .035N .025N Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Case - Isolated N .005N OM1323STM Isolated OM1323NTM Non-Isolated Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Tab - Isolated Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Tab - Input .140 .015 .140 .140 1 2 .075 .075 .157 .415 3 .062 .375 .030 MIN. OM1323NMM Pin 1 - Adjust Pin 2 - Output Pin 3 - Input 1.197 1.53 REF. 1.177 0.875 MAX. 0.675 0.655 0.188 R. MAX. 0.135 MAX. .020 X45° REF. (±.003) 0.450 0.250 0.043 0.038 .040 .075 (±.010) TYP. 4 .010 3 .025 TYP. 2 1 9 .160 SQ. REF. 1 .085 0.312 MIN. SEATING PLANE .009 R. 20 PLCS. .065 0.440 0.420 13 19 0.225 0.205 0.161 0.151 0.525 R. MAX. .003 .025 SQ. TYP. 18 14 .050 TYP. .050 (±.005) TYP. 2 PLCS. .040 X45° REF (3 PL) OM1323N2M 3.5 OM1323NKM Pin 1 - Adjust Pin 2 - Output Case - Input Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 VIN NC NC NC NC NC NC NC ADJUST NC Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 For additional information please see the mechanical outline section. NC VOUT VOUT NC NC NC NC NC NC VIN