CALMIRCO CM1436-04DE 4 and 8 channel emi filter arrays with esd protection Datasheet

CM1436
4 and 8 Channel EMI Filter Arrays with ESD Protection
Features
Product Description
•
California Micro Devices's CM1436 is an EMI filter
array with ESD protection, which integrates either four,
six or eight pi filters (C-R-C). Each CM1436 filter has
component values of 15pF-200Ω-15pF. These parts
include ESD protection diodes on every pin, providing
a very high level of protection for sensitive electronic
components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter
ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC
61000-4-2, Level 4 international standard. Using the
MIL-STD-883 (Method 3015) specification for Human
Body Model (HBM) ESD, the pins are protected for
contact discharges at greater than ±30kV.
•
•
•
•
•
•
Four, six and eight channels of EMI filtering with
ESD protection
Greater than 30dB of attenuation from 800MHz to
3GHz
±15kV ESD protection (IEC 61000-4-2, contact
discharge)
±30kV ESD protection (HBM)
Fabricated with Centurion™ advanced low
capacitance zener process technology
Space saving, low-profile 8-, 12- and 16-lead
0.4mm pitch TDFN packages
Lead-free version available
Applications
•
•
•
This device is particularly well-suited for portable electronics (e.g. mobile handsets, PDAs, notebook computers) because of its small package and easy-to-use
pin assignments. In particular, the CM1436 is ideal for
EMI filtering and protecting data lines from ESD in
wireless handsets.
I/O port protection for mobile handsets, notebook
computers, PDAs etc.
EMI filtering for data ports in cell phones, PDAs or
notebook computers.
EMI filtering for LCD, camera and chip-to-chip data
lines
The CM1436 is available in space-saving, low-profile,
8-lead, 12-lead and 16-lead 0.4mm pitch TDFN packages. It is fabricated with California Micro Devices'
Centurion™ process and available with optional leadfree finishing.
Electrical Schematic
200Ω
FILTERn*
FILTERn*
15pF
15pF
GND
1 of 4/6/8 EMI Filtering + ESD Channels
* See Package/Pinout Diagram for expanded pin information.
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
1
CM1436
PACKAGE / PINOUT DIAGRAMS
TOP VIEW
BOTTOM VIEW
(Pins Down View)
8 7 6 5
GND
PAD
XX
Pin 1
Marking
1 2 3 4 5 6
XXXX
GND
PAD
TOP VIEW
12 11 10 9 8 7
6
(Pins Up View)
16 15 14 13 12 11 10 9
1 2 3 4 5 6 7
8
GND
PAD
XXXXX
1 2 3 4 5
(Pins Up View)
CM1436-06DF/DE
12 Lead TDFN Package
BOTTOM VIEW
(Pins Down View)
Notes:
1) This drawing is not to scale.
2) See Ordering Information section
below for device specific marking.
12 11 10 9 8 7
1 2 3 4 5
CM1436-04DF/DE
8 Lead TDFN Package
Pin 1
Marking
BOTTOM VIEW
Pin 1
Marking
8 7 6 5
1 2 3 4
TOP VIEW
(Pins Down View)
(Pins Up View)
1 2 3 4
6 7
16 15 14 13 12 11 10 9
8
CM1436-08DF/DE
16 Lead TDFN Package
PIN DESCRIPTIONS
Pins
Pins
143604Dx
143606Dx
143608Dx
NAME
DESCRIPTION
143604Dx
143606Dx
143608Dx
NAME
DESCRIPTION
1
1
1
FILTER1
Filter Channel 1
8
12
16
FILTER1
Filter Channel 1
2
2
2
FILTER2
Filter Channel 2
7
11
15
FILTER2
Filter Channel 2
3
3
3
FILTER3
Filter Channel 3
6
10
14
FILTER3
Filter Channel 3
4
4
4
FILTER4
Filter Channel 4
5
9
13
FILTER4
Filter Channel 4
5
5
FILTER5
Filter Channel 5
8
12
FILTER5
Filter Channel 5
6
6
FILTER6
Filter Channel 6
7
11
FILTER6
Filter Channel 6
7
FILTER7
Filter Channel 7
10
FILTER7
Filter Channel 7
8
FILTER8
Filter Channel 8
9
FILTER8
Filter Channel 8
GND
Device Ground
GND Pad
Ordering Information
PART NUMBERING INFORMATION
Standard Finish
Leads/Pins
Package
8
TDFN-08
Ordering Part
Number1
CM1436-04DF
Lead-free Finish
Part Marking
Ordering Part Number1
Part Marking
6F
CM1436-04DE
6E
12
TDFN-12
CM1436-06DF
N36F
CM1436-06DE
N36E
16
TDFN-16
CM1436-08DF
N368F
CM1436-08DE
N368E
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
© 2006 California Micro Devices Corp. All rights reserved.
2
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
02/06/06
CM1436
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Storage Temperature Range
RATING
UNITS
-65 to +150
°C
DC Power per Resistor
100
mW
Package DC Power Rating
300
mW
RATING
UNITS
-40 to +85
°C
STANDARD OPERATING CONDITIONS
PARAMETER
Operating Temperature Range
ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
160
200
240
Ω
12
15
18
pF
R
Resistance
C
Capacitance
At 2.5V DC, 1MHz, 30mV AC
Diode Standoff Voltage
IDIODE = 10μA
6.0
ILEAK
Diode Leakage Current (reverse
bias)
VDIODE = 3.3V
0.1
1
μA
VSIG
Signal Voltage
Positive Clamp
Negative Clamp
6.8
-0.8
9.0
-1.5
V
V
VESD
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD883, Method 3015
b) Contact Discharge per IEC
61000-4-2 Level 4
Notes 2 and 3
Cut-off Frequency
ZSOURCE=50Ω, ZLOAD=50Ω
R = 200Ω, C = 15pF;
Note 3
Absolute Attenuation @ 1GHz from
0dB Level
A800MHz - Absolute Attenuation @ 800MHz to
VDIODE
fC
A1GHz
6GHz from 0dB Level
6GHz
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
ILOAD = 10mA
ILOAD = -10mA
5.6
-0.4
V
±30
kV
±15
kV
100
MHz
ZSOURCE = 50Ω, Z LOAD = 50Ω,
DC Bias = 0V; Notes 1, 4 and 5
35
dB
ZSOURCE = 50Ω, Z LOAD = 50Ω,
DC Bias = 0V; Notes 1, 4 and 5
30
dB
TA=25°C unless otherwise specified.
ESD applied to input and output pins with respect to GND, one at a time.
These parameters are guaranteed by design and characterization.
Attenuation / RF curves characterized by a network analyzer using microprobes.
These parameters are NOT guaranteed by design, characterization and production.
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
3
CM1436
Performance Information
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 1. Channel 1 EMI Filter Performance (CM1436-04 only)
Figure 2. Channel 2 EMI Filter Performance (CM1436-04 only)
© 2006 California Micro Devices Corp. All rights reserved.
4
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
02/06/06
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 3. Channel 3 EMI Filter Performance (CM1436-04 only)
Figure 4. Channel 4 EMI Filter Performance (CM1436-04 only)
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
5
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 5. Channel 1 EMI Filter Performance (CM1436-06/08 only)
Figure 6. Channel 2 EMI Filter Performance (CM1436-06/08 only)
© 2006 California Micro Devices Corp. All rights reserved.
6
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
02/06/06
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 7. Channel 3 EMI Filter Performance (CM1436-06/08 only)
Figure 8. Channel 4 EMI Filter Performance (CM1436-06/08 only)
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
7
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 9. Channel 5 EMI Filter Performance (CM1436-06/08 only)
Figure 10. Channel 6 EMI Filter Performance (CM1436-06/08 only)
© 2006 California Micro Devices Corp. All rights reserved.
8
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
02/06/06
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 11. Channel 7 EMI Filter Performance (CM1436-08 only)
Figure 12. Channel 8 EMI Filter Performance (CM1436-08 only)
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
9
CM1436
Performance Information (cont’d)
Figure 13. Filter Capacitance vs. Input Voltage over Temperature
(normalized to capacitance at 2.5VDC and 25°C)
© 2006 California Micro Devices Corp. All rights reserved.
10
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
02/06/06
CM1436
Mechanical Details
CM1436-04DF/DE Mechanical Specifications
Mechanical Package Diagrams
Dimensions for the CM1436-04DF/DE supplied in a 8lead, 0.4mm pitch TDFN package are presented
below.
For complete information on the TDFN-8, see the California Micro Devices TDFN Package Information document.
D
8 7 6 5
E
Pin 1
Marking
PACKAGE DIMENSIONS
Package
TDFN
JEDEC
No.
MO-229C✝
Leads
8
Dim.
1 2 3 4
TOP VIEW
Millimeters
Inches
0.10 C
Min
Nom
Max
Min
Nom
Max
A
0.70
0.75
0.80
0.028
0.030
0.031
A1
0.00
0.02
0.05
0.000
0.001
0.002
A3
0.20 REF
b
0.15
0.20
0.25
0.006
0.008
0.010
1.65
1.70
1.75
0.065
0.067
0.069
D2
1.10
1.20
1.30
0.043
0.047
0.051
E
1.30
1.35
1.40
0.051
0.053
0.055
E2
0.30
0.40
0.50
0.012
0.016
0.020
0.40 BSC
K
0.20
L
0.15
# per
tape and
reel
A1
0.008 REF
D
e
0.08 C
A
8X
0.10
M
CAB
Pin 1
Locator
1
0.016 BSC
0.35
0.006
0.010
b
e
2
3
C0.2
GND
PAD
7
6
0.008
0.25
A3
SIDE VIEW
0.014
K
3000 pieces
8
E2
4
5
D2
L
BOTTOM VIEW
Controlling dimension: millimeters
✝
This package is compliant with JEDEC standard MO-229C with the
exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as
called out in the table above.
Dimensions for 8-Lead, 0.4mm pitch
TDFN package
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
11
CM1436
Mechanical Details (cont’d)
CM1436-06DF/DE Mechanical Specifications
Mechanical Package Diagrams
Dimensions for the CM1436-06DF/DE suplied in a 12lead, 0.4mm pitch TDFN package are presented
below.
For complete information on the TDFN-12, see the California Micro Devices TDFN Package Information document.
D
12 11 10 9 8 7
E
Pin 1
Marking
PACKAGE DIMENSIONS
Package
TDFN
JEDEC
No.
MO-229C✝
Leads
12
1 2 3 4 5 6
TOP VIEW
Millimeters
Dim.
Inches
0.10 C
Min
Nom
Max
Min
Nom
Max
A
0.70
0.75
0.80
0.028
0.030
0.031
A1
0.00
0.02
0.05
0.000
0.001
0.002
A3
0.20 REF
b
0.15
0.20
0.25
0.006
0.008
0.010
2.45
2.50
2.55
0.096
0.098
0.100
D2
1.90
2.00
2.10
0.075
0.079
0.083
E
1.30
1.35
1.40
0.051
0.053
0.055
E2
0.25
0.35
0.45
0.010
0.014
0.018
0.40 BSC
K
0.20
L
0.15
# per
tape and
reel
A1
0.008 REF
D
e
0.08 C
A
8X
Pin 1
Locator
0.016 BSC
0.35
0.006
0.010
0.10
e
0.008
0.25
A3
SIDE VIEW
K
0.014
1
M
CAB
4
b
2
3
C0.1
GND PAD
12 11 10
5
9
8
E2
6
7
D2
3000 pieces
L
BOTTOM VIEW
Controlling dimension: millimeters
✝
This package is compliant with JEDEC standard MO-229C with the
exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as
called out in the table above.
Dimensions for 12-Lead, 0.4mm pitch
TDFN package
© 2006 California Micro Devices Corp. All rights reserved.
12
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
02/06/06
CM1436
Mechanical Details (cont’d)
CM1436-08DF/DE Mechanical Specifications
Mechanical Package Diagrams
The CM1436-08DF/DE is supplied in a 16-lead, 0.4mm
pitch TDFN package. Dimensions are presented
below.
For complete information on the TDFN-16, see the California Micro Devices TDFN Package Information document.
D
16 15 14 13 12 11 10 9
E
Pin 1
Marking
PACKAGE DIMENSIONS
Package
TDFN
JEDEC
No.
MO-229C✝
Leads
16
Dim.
1 2 3 4 5 6 7 8
TOP VIEW
Millimeters
Inches
0.10 C
Min
Nom
Max
Min
Nom
Max
A
0.70
0.75
0.80
0.028
0.030
0.031
A1
0.00
0.02
0.05
0.000
0.001
0.002
A3
0.40
0.55
0.70
0.016
0.022
0.028
b
0.20 REF
3.25
3.30
3.35
0.128
0.130
0.132
D2
2.80
2.90
3.00
0.110
0.114
0.118
E
1.30
1.35
1.40
0.051
0.053
0.055
E2
0.35
0.40
0.45
0.014
0.016
0.018
0.40 BSC
K
0.20
L
0.15
# per
tape and
reel
A3
SIDE VIEW
A
8X
0.10
e
Pin 1
Locator
1
0.35
0.006
0.010
0.014
2
3
K
M
CAB
4
5
b
7
8
16 15 14 13 12 11 10
9
C0.2
0.016 BSC
0.008
0.25
A1
0.008 REF
D
e
0.08 C
6
E2
GND PAD
D2
3000 pieces
L
BOTTOM VIEW
Controlling dimension: millimeters
✝
This package is compliant with JEDEC standard MO-229C with the
exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as
called out in the table above.
Dimensions for 16-Lead, 0.4mm pitch
TDFN package
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
13
Similar pages