Intersil ISL28134 Intersilâ s solutions for industrial process control Datasheet

INTERSIL SELECTION GUIDE
INDUSTRIAL
PROCESS CONTROL
Precision Amplifiers, Precision Data Converters, Voltage References,
Real Time Clocks, Interface, Digital Potentiometers (DCPs),
Switch/Mux, Switching Regulators, Isolated PWM Controllers, LDOs,
Integrated FET Switching Regulators, PWM Controllers, Voltage
Monitors, Sequencers
Q1/Q2 2012
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
Intersil’s Solutions for Industrial Process Control
Precision data acquisition solutions are required for a broad
range of Industrial applications. Programmable logic controllers
(PLC), distributed control systems (DCS), smart transmitters,
and general-purpose data acquisition are used in the majority
of these Industrial systems. These applications utilize various
types of sensors and feedback mechanisms to monitor and
control machine or system interactions by collecting, storing,
and analyzing data. Sensor data acquisition involves precision
measurement and processing of analog variables, such as
voltages and currents, where there is a need to sense very
small changes. Intersil’s broad portfolio of analog, power and
interface solutions makes it well positioned to deliver world class
solutions to Industrial customers. In this solutions brochure, you
will find outstanding solutions from Intersil for your current and
future Industrial systems.
Intersil Corporation is a global technology leader specializing
in the design and manufacture of high performance analog
semiconductors. Built on a solid foundation, with many years
of analog experience, Intersil is committed to developing
leadership solutions for the Industrial market. Over the past
several years, Intersil has heavily invested and will continue to
invest in robust technology capable of supporting the demanding
requirements of the Industrial market. Intersil’s proprietary 40V
precision silicon-on-insulator (SOI) bipolar process technology,
developed, specifically to target the Industrial market and the
growing portfolio of leadership precision amplifiers, are excellent
examples of this commitment.
Typical Industrial Control Loop Block Diagram
I2 C Bus
ANALOG SIGNAL INPUT MODULEs
MUX and ADC
Pressure/Strain Gage Sensor
VREF
Precision
Amps
Gain
Amplifiers
DCP
+V
+V
Precision
Amps
Precision
Amps
-V
-V
Precision
Amps
Gain
Amplifiers
DCP
+V
Precision
Amps
RTD
Active
Filters
V
Precision
Amps
Thermacouple
Loop Supply
Actuators
Motors
Control loops
Differential
Pressure
Transducer
w/ √
Extractor
Gain
Amplifiers
+V
Iout
4 -20mA
2 | www.intersil.com/industrial_process_control
Vin
Active
Filters
+V
Precision
Amps
Precision
Amps
-V
-V
Switching
Regulator
V
-V
Flow Sensor
LDO’s
System
Power
+V
-V
ISO-Thermal
Block
VREF
High
Voltage
Input Signal
Temperature Sensor
VREF
µC
ADC
M
U
X
Active
Filters
+V
Precision
Amps
-V
Buffer, Filters,
Span Drivers
+V
Precision
Amps
-V
M
U
X
DAC
VREF
ANALOG SIGNAL OUTPUT MODULE
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
Contents
RTC
RS-232
PLC (Program Logic Controllers) Application
4
Analog Input
RS-485
Master
µC
RS-485
RTC
Mixed Signal High Voltage - Quad Op Amps to 24-bit
Sigma Delta 4
Analog Output
High Voltage Output Voltage and 0-20mA Current
Loop 8
Sensors
POWER
Low Noise Precision Sensor Chipset Solutions 10
High Voltage Bridge Sensor Signal Conditioning 10
Voltage
Monitors &
Watchdog
Control
Real Time Clock 12
Power
Core &
I/O Power
HV Dual Supply Power Solution
LDO
Switching
Controller
+V
Switching
Regulators
High Voltage Input Rail ~24V
13
DCS (Distributed Control Systems) Application
14
Analog Input
High Voltage and Low Voltage, Low Power
Solutions 14
For Distributed Control Systems 14
Control
RS-485/422 16
Single Ended
Controller
-V
Sensors
Wireless Strain Gauge Sensor 17
Additional Recommended Industrial Products
Isolator
Design Resources
iSIM
18
20
20
Isolated Power
www.intersil.com/industrial_process_control | 3
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC (Program Logic Controllers) Application
Analog Output
Analog Input
Control
Sensors
Power
Mixed Signal High Voltage - Quad Op Amps to 24-bit Sigma Delta
• Low Noise
• Low Power
• Low Offset
• Low Offset Drift
Dual Supply Voltage Inputs
±10V Analog Input
ISL28417
+ +15V
Hi Voltage LDO
ISL78307
+5V
-
+15V
-15V
V+
-
+
Power Supply Solutions
Dual Supply
to Single Supply
Attenuator
-
Vo+
Gnd
DG408
+15V
-
Vin-
-
ISL21090
VREF
ISL21009
2.5V
24-bit
Low Noise
∆∑
ADC
2.5V
V+
ISL21090
ISL21009
VREF
+
Vin+
+
Low Noise VREF
ISL28218
ISL28134
Vo-
+
ISL26132/134
ISL26102/104
Gnd
Isolated HV Dual
Supply
+ +15V
-
ISL6844
Low Noise Delta Sigma 24-bit Converters and Low Noise ADC Drivers
OR
+15V
Non-Isolated HV
Dual Supply
- 15V
-15V
-15V
ISL28408
Single Supply Voltage Inputs • Low Noise
• Low Offset
0V to 10V Analog Input
• Ground Sense Inputs
• Rail-Rail Output
• Low Power Option
+10V to +15V
+
ISL97701
-
-15V
Gnd
+15V
Dual Supply
to Single Supply
Attenuator
-
+
-
Vin+
V+
Vo+
VREF
DG408
+
-
Vin-
-
2.5V
V+
ISL21090
ISL21009
VREF
+
Gnd
4 to 256
CHANNELS
Low Noise VREF
ISL28218
ISL28134
ISL21090
ISL21009
2.5V
24-bit
Low Noise
Vo-
+
∆∑
ADC
ISL26132/134
ISL26102/104
Gnd
+
-
Gnd
- 15V
Dual Supply Voltage Inputs
High Impedance
±5V Analog Input
• Low Noise
• Low Offset
• Low Bias Current
ISL28210 (±5V to ±20V)
+
-
+
-
+5V
-5V
-
-
-5V
Vin+
-
-
V+
+
Gnd
+5V
- 15V
VREF
Vo+
VREF
Vin-
Low Noise VREF
ISL28218
ISL28134
Gnd
+5V
-5V
4 | www.intersil.com/industrial_process_control
V+
+
DG408
-5V
+
Dual Supply
to Single Supply
Attenuator
+5V
ISL28210
+
+15V
2.5V
ISL21090
ISL21009
Vo-
ISL21090
ISL21009
2.5V
24-bit
Low Noise
∆∑
ADC
ISL26132/134
ISL26102/104
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Output
Analog Input
Control
Sensors
Power
High Voltage Ultra Precision Op Amp: ISL28417
40V Quad, Low Power,
Low Noise Precision
Bipolar Op Amp
Low Offset Drift of 0.6µV/°C MAX
18
NUMBER OF AMPLIFIERS
14
Key Features
•
•
•
•
•
Low Input Offset...................±50μV, Max
Superb Offset TC............. 0.6μV/°C, Max
Input Bias Current................ ±1nA, Max
Input Bias Current TC......±5pA/°C, Max
Low Current Consumption..........440μA
•
•
•
•
V S = ± 15V
16
Voltage Noise........................... 8nV/√Hz
Bandwidth.................................. 1.5MHz
Wide Supply Range.............. 4.5V to 40V
Operating Temperature Range.............
. .................................... -40°C to +125°C
Evalboard
Available!
12
10
8
6
4
2
0
-0.45
-0.30
Key Features
Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
Wide Supply Range................. 9V to 40V
Low Voltage Noise................... 6nV/√Hz
Low Input Bias Current.................... 2pA
High Slew Rate............................ 20V/μs
High Bandwidth....................... 12.5MHz
Low Input Offset...................300μV, Max
Low Current Consumption........2.55mA
Wide Tempe Range...... -40°C to +125°C
Dual
Supply
Voltage (V)
Quad
ISL28117B ISL28217B ISL28417B
ISL28127 ISL28227
ISL28107 ISL28207 ISL28407
ISL28117C ISL28217C ISL28417C
ISL28118 ISL28218
ISL28177
ISL28108 ISL28208 ISL28408
ISL28110 ISL28210
0.15
0.30
0.45
Very High Impedance
• ISL28210 is ideal for Flow Sensors and other high
impedance applications.
Photodiode
Part Number
0
V OS TC (µV/°C)
High Voltage Ultra Precision Op Amp: ISL28210
40V Dual Precision,
Low Noise, JFET Op Amp
Single
-0.15
ISL28210
+
High Impedance Buffers
Medical Instrumentation
Flow Sensor
ATE/Test
Data Acquisition
Transimpedance Amp
ISL28210 has Very High
560GΩ Input Impedance
Vos
Max @
25°C
TCVos
Typ
Ib Max
@
25°C
CMRR
min @
25°C
PSRR
min @
25°C
Av
Is Max
min @
@
25°C
25°C
Noise
0.1 to
10Hz
Voltage
Noise @
1kHz
Current
Noise @
1kHz
GBW
Slew
Rate
Min
Max
In
Out
µV
µV/°C
nA
dB
dB
dB
mA
MHz
V/µs
µVpp
nV/√Hz
fA/√Hz
4.5
4.5
4.5
4.5
3
4.5
3
9
40
40
40
40
40
40
40
40
No
No
No
No
Single Supply
No
Single Supply
No
No
No
No
No
Yes
No
Yes
No
50
70
75
100
230
150
250
300
0.14
0.1
0.1
0.14
0.3
0.5
0.1
1
1
10
0.3
1
575
1
43
0.002
120
115
115
120
103
120
105
88
120
115
115
120
109
115
110
102
129.5
120
129.5
129.5
124.7
120
117
104
0.53
2.8
0.29
0.53
1.1
1.4
0.25
2.9
1.5
10
1
1.5
4
0.6
1.2
12.5
0.5
3.6
0.32
0.5
1.2
0.2
0.45
23
0.25
0.085
0.34
0.25
0.3
0.38
0.58
0.6
8
2.5
13
8
5.6
9.5
15.8
6
100
400
53
100
355
87
80
9
Rail-To-Rail
www.intersil.com/industrial_process_control | 5
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Analog Output
Control
Sensors
Evalboard
Available!
Power
24-bit ADCs: ISL26132, ISL26134
Low Noise
Easy to Use ADC
with Superior Noise
Performance at
Low Cost
• At 10SPS, 128x Gain ISL26134 noise is 5.6nV/√Hz
• Competitor A shows 10.2nV/√Hz
Key Features
• Drop-In Compatible with ADS1232/34
-- Improved Performance with no change in
circuitry
• 10SPS, 80SPS Operation
• Best in Class Performance – 21.6 Bits noise-free
(Gain = 1)
• Low Noise PGA with Buffer
• Simultaneous 50/60 Hz Noise Rejection
• 2 & 4 Channel, Differential-input Multiplexer
• All Functions Pin-programmed
• Low Power: 50mW (max), 1µA in Shutdown Mode
-- 5V Analog, 5.5V / 2.7V Digital Supplies
• Easy-to-Use SPI-compatible Serial Interface
• 24 / 28 Pin TSSOP Package
• Extended Industrial Temp Range (-40ºC - 105ºC)
• Robust ESD Rating – 7.5kV HBM
• Samples and Evaluation Board Available
Device
ISL26102
ISL26104
ISL26132
ISL26134
Description
Competitor A 128X Gain
ISL26134 128X Gain
Highly Integrated
CAP
AVDD
DVDD
ISL26132, ISL26134
AIN1+
AIN1AIN2+
AIN2AIN3+
AIN3ISL26134
AIN4+
Only
AIN4-
INPUT
MUX
XTALIN/CLOCK
INTERNAL EXTERNAL
OSCILLATOR
CLOCK
XTALOUT
SDO/RDY
∆∑
ADC
PGA
1x/2x/64x/
128x
SCLK
PWDN
SPEED
A0
A1/TEMP AGND GAIN0 GAIN1
CAP
DGND
VREF+
VREF-
DGND DGND
Resolution
(Bits)
Max Conversion
Rate (SPS)
Channels
INL (%FS)
Noise
(µVrms)
Power
(mW)
Analog Supply
Voltage (V)
Digital Supply
Voltage (V)
Package
24
24
24
24
4000
4000
80
80
2
4
2
4
0.0002%
0.0002%
0.0002%
0.0002%
0.01
0.01
0.01
0.01
50
50
50
50
5V
5V
5V
5V
2.7V - 5V
2.7V - 5V
2.7V - 5V
2.7V - 5V
24 Ld TSSOP
28 Ld TSSOP
24 Ld TSSOP
28 Ld TSSOP
Low-Noise 24-bit ADC
Low-Noise 24-bit ADC
Low-Noise, Low-cost 24-bit ADC
Low-Noise, Low-cost 24-bit ADC
6 | www.intersil.com/industrial_process_control
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Analog Output
Control
Sensors
Evalboard
Available!
Key Features
•
•
•
•
•
•
•
•
•
•
•
1A MOSFET Gate Driver
60μA Start-up Current, 100μA Maximum
25ns Propagation Delay Current Sense to Output
Fast Transient Response with Peak Current Mode Control
Adjustable Switching Frequency to 2MHz
20ns Rise and Fall Times with 1nF Output Load
Trimmed Timing Capacitor Discharge Current for Accurate
Deadtime/Maximum Duty Cycle Control
High Bandwidth Error Amplifier
Tight Tolerance Voltage Reference Over Line, Load, and
Temperature
Tight Tolerance Current Limit Threshold
Pb-Free Available (RoHS Compliant)
Refer to application note AN1612 to generate
positive and negative isolated supplies.
Single-Ended PWM Controller: ISL6844
Tight Tolerance Voltage Reference Over Line, Load, and
Temperature
1.001
1.000
NORMALIZED VREF
Single Ended Controller
for Positive and Negative
Isolated Supplies
Power
0.999
0.998
0.997
0.996
0.995
-40 -25
-10
5
20
35
50
65
80
95 110
TEMPERATURE (°C)
Isolated HV Dual Power Supply
1
VIN
CIN
D1
n
+15V
COUT1
CS
RS
DS
n
COUT2
D2
OUT
-15V
CS
RSENSE
VIN
ISL6844
VREG
VDD
FB
n
CAUX
GND
Linear Regulator: ISL78307
40V, Low Quiescent
Current, 50mA Linear
Regulator
High Input Voltage (VIN = 40V)
VIN = 14V
CIN
0.1µF
R1
EN
(ISL78307)
GND
Low Quiescent Current (Iq = 18µA)
70
60
QUIESCENT CURRENT (µA)
18μA Typical Quiescent Current
Guaranteed 50mA Output Current
1.8μA of Typical Shutdown Current
Low Dropout Voltage of 120mV at 50mA
Fixed +3.3V, +5.0V and Adjustable Output Voltage Options
Thermal Shutdown and Current Limit Protection
-40°C to +125°C Operating Temperature Range
Thermally Enhanced 8 Ld Exposed Pad SOIC Package
6kV ESD HBM Rated
ADJ
COUT
10µF
R2
Key Features
•
•
•
•
•
•
•
•
•
VOUT = 12V
OUT
IN
LOAD = 50mA
50
40
30
20
LOAD = 0mA
10
0
-50
0
50
100
150
TEMPERATURE (°C)
www.intersil.com/industrial_process_control | 7
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Control
Analog Output
Sensors
Power
High Output Voltage and 0-20mA Current Loop
Power
Vin = 8V to 37V
Vout = 40V
FB
CS
Flexible Singled Ended Current
Mode Controller
• Accurate Voltage Reference
• Fast Transient Response
ISL8840A
COMP
VREF
VDD
OUT
GND
RTCT
Typical Application : Wide Vin Boost Converter
Analog
VSupply
High Voltage Precision Op Amps
ISL21090
ISL21009
High Accuracy
• 0.02% Initial Accuracy
• 3ppm, 7ppm Temp Co
• 20ppm Long Term Drift
Low Noise
• 1.9µV peak-peak
(0.1H to 10Hz)
• Wide Operating Voltage Range
to ±20V or to 40V.
• Low Power, Low Noise
VREF
DAC
-
ISL28208
ISL28217
-
+
+
I OUT
4 - 20mA
Current Loop
JFET-input Precision Op Amps
• Low Bias Current Cancellation
Performance Over Temperature
DAC
+
-
ISL28210
• Fast Slew: 20V/µs
VOUT
±4.5V to ±20V
Dual Supply
High Impedance
DAC
8 | www.intersil.com/industrial_process_control
+
-
ISL28218
ISL28208
VOUT
Below V- to +40V
Single Supply
Rail-Rail
Single Supply, High Voltage
Precision Op Amps
• Rail-Rail Outputs
• Operates -0.5V Below V-
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Analog Output
Control
Sensors
Power
Single-Ended PWM Controller: ISL8840A
Key Features
•
•
•
•
•
•
•
•
1A MOSFET Gate Driver
90μA Start-up Current, 125μA Maximum
35ns Propagation Delay Current Sense to Output
Fast Transient Response with Peak Current Mode Control
30V Operation
Adjustable Switching Frequency
20ns Rise and Fall Times with 1nF Output Load
Trimmed Timing Capacitor Discharge Current for Accurate
Deadtime/Maximum Duty Cycle Control
• 1.5MHz Bandwidth Error Amplifier
• Tight Tolerance Voltage Reference Over Line, Load and
Temperature
• ±3% Current Limit Threshold
Tight Tolerance Voltage Reference Over Line, Load, and
Temperature
1.001
NORMALIZED VREF
High Performance
Single Ended
Current Mode PWM
Controller
1.000
0.999
0.998
0.997
0.996
0.995
-60 -40 -20
0
20
60
80 100 120 140
REFERENCE VOLTAGE vs TEMPERATURE
Evalboard
Available!
40V Precision Op Amp: ISL28208
40V Precision,
Low Power, Single
Supply, RRO Op Amp
Intersil’s ISL28208 is a high voltage precision,
low power op amp, featuring single power supply
operation and rail-to-rail output to provide full
output dynamic range to take take full advantage
of the ADC performance in precision applications
without compromise.
Key Features
• Wide Input Range
• Rail-to-Rail Output
• Single or Dual Supply
Operating
• Low Power - 250µA max
40
TEMPERATURE (°C)
Typical Application Circuit
RF
100kΩ
LOAD
RINRSENSE
IN-
10kΩ
RIN+
IN+
10kΩ
RREF+
-
V+
ISL28208
V-
+3V
to 40V
VOUT
+
GAIN = 10
100kΩ
VREF
• Precision
-- Low Offset Voltage: 230µV max
-- Low Drift: 0.1µV/°C typ
• Low Noise
-- 15.8nV/√Hz @ 1kHz
-- 80fA/√Hz @ 1kHz
SINGLE-SUPPLY, LOW-SIDE
CURRENT SENSE AMPLIFIER
www.intersil.com/industrial_process_control | 9
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Analog Output
Control
Power
Sensors
Low Noise Precision Sensor Chipset Solutions
Low Noise Voltage References
Voltage Output: 5V, 7V, 10V
Zero Drift, Chopper-Stabilized Precision Op Amps
• High Accuracy
0.02% Initial Accuracy
3ppm, 7ppm Temp Co
20ppm Long Term Drift
• Low Noise (200nVpp) and Low Power
(17µA) Options
• High CMRR (135dB) Perfect for Bridge
Excitation Signals
• Low Noise,
1.9µV peak-peak (0.1H to 10Hz)
• Rail-Rail Inputs/Outputs
Power Supply Solution
ISL21090
ISL21009
High Voltage Low Iq LDO
VREF
+
VIN = 14V
ISL78307
CIN
0.1µF
EN
-
Bridge
Frontends
VOUT = 12V
OUT
IN
ISL28134
ISL28133
COUT
10µF
R1
ADJ
ADC
R2
GND
ISL233x5
ISL233x8
ISL26132
ISL26102
ISL2632x
+
ISL28134
ISL28133
Low Noise Data Converters 24-bit Delta Sigma
Industry Leader in Digital Potentiometers
• Precision Low Noise: +22-bit ENOB
• Digital Interface for Calibration I2C and SPI
• Sample Rate: 2.5 to 4000 sps
• Volatile and Non-volatile Wiper Position
• Multi-channel Inputs + PGA
High Voltage Bridge Sensor Signal Conditioning
Precision Sensor & Data Acquisition 24-Bit Low Noise, Analog Inputs To Digital Output
Active Source
to Bridge Sensor
Low Noise VREF
5V, 7V, 10V
Sensor
Calibration
ISL21090
ISL21009
VREF
Non-Isolated
HV Dual Supply
Wide VIN
Boost Regulator
Super Voltage
Converter
ISL97701
ISL98012
ICL7660S
DCP
ISL233X5
+20V
+12V
-20V
-5V
Power Supply Solutions
R4
R3
1 to N Inputs
to Multi-channel
Instrumentation Amp
Pressure
Strain
Flow Sensors
General
Purpose
Mixed signal
Inputs
R2
N-ch
Mux
+15V
∆V = 100mV
Transducer In
∆V = 1V
+/-5V
+/-10V
0V to 30V
Gain/Attenuation
Select
R1
Bridge
Sensor In
HI-509
DAQ Inputs
N-ch
Mux
Low Noise VREF
ISL21090
ISL21009
2.5V
VREF
ISL54702
Multi-channel
ADC Inputs
IN+ Rin
Out+
INOutFB+
FB- Rfb
Vocm
Current Shunt Sense
mΩ
- 15V
ISL28516
ISL28617
ISL21090
VREF
ISL21009
Host Controller
24-bit
Low Noise
∆∑
ISL26132/134
ADC
ISL26102/104
2.5V
DC Adjust
DCP
Analog
Control
Feedback
From Motor
Control Block
-
+28V
Microcontroller
+
ISL28006
High Voltage Current Sense Amp
• Integrated Gain Options
• Voltage Output
10 | www.intersil.com/industrial_process_control
ISL22426
High Voltage Instrumentation Amp
with Integrated Differential ADC Driver
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Analog Output
Control
Power
Sensors
Volatile DCP: ISL233x5, ISL234x5, ISL233x8, ISL234x8
World’s Lowest Voltage,
Volatile, DCP Family
Integrated Level Translator
I2C/SPI Voltage = 1.2V to 5.5V
VLOGIC
Lowest Voltage
Specification
Intersil
Analog Voltage
1.7V to 5.5V
Digital Voltage
1.2V to 5.5V
Low Current
Consumption
2.5µA - 1CH
3µA - 2CH
5µA - 4CH
Competition
1.8V to 5.5V
2.7V to 5.5V
Same as analog
voltage, lowest is
1.8V
Part #
ISL23315,
ISL23415,
ISL23318,
ISL23418
Single
Intersil
Competition
µTQFN (2.1x1.6mm)
SC-70 (2x2.1mm)
µTQFN (2.6x1.8mm)
ISL23345,
ISL23445,
ISL23348,
ISL23448
Quad
VLOGIC VCC
Level
Translator
SCL
DCP
ISL23315
SDA
Integrated Level Translator
RH
RW 1.6mm
RL
2.1mm
Direct communication with low
voltage µC
Benefit
Vref Adjustment
VREF
20% Smaller
RH
ISL23325,
ISL23425,
ISL23328,
ISL23428
Dual
µC
Smallest 256-Tap DCP
Smaller Package
Type
SDA
SCL
I2C Bus
Benefit
Operational when battery
starts draining.
Eliminate level shifter for I2C/
SPI when µC has low voltage
I/O pins.
Up to 2x more power Drains up to 50% less battery
consumption
power.
5V
1.2V
_
48% Smaller
ISL23415
QFN (4x4mm)
25% Smaller
QFN (3x4mm)
RW
VREF_M
+
ISL28114
RL
QFN (4x4mm)
Ultra Precision Vref: ISL21090
Ultra Low Noise,
Precision Voltage
Reference
Temperature Drift (Coefficient)
2.5010
TYPICAL TEMPERATURE
2.5005 COEFFICIENT CURVE FOR 10 UNITS
VOUT (V)
2.5000
Key Features
•
•
•
•
•
•
•
•
•
7V Reference Output Voltage Option
Initial Accuracy: ±0.02%
Output Voltage Noise: 5.3µVpp Typ (0.1 to 10Hz)
Supply Current: 930µA (typ)
Tempco: 7ppm/°C (3ppm/°C coming soon)
Output Current Capability: 20mA
Line Regulation: 8ppm/V
Load Regulation: 2.5ppm/mA
Operating Temperature Range: -40°C to 125°C
2.4995
2.4990
2.4985
2.4980
-55
-35
-15
5
25
45
65
85
105
125 145
TEMPERATURE (°C)
ISL21090 Typical Temperature Coefficient Curve
Long Term Drift
40
30
5V
7V
10V
ISL21090B
2.5V
Device
Number
1.25V
X
X
X
X
X
PPM
20
10
Isy
Max
(µA)
Vsy
Max
(V)
Noise
Low
Freq
(µVp-p)
Noise
High
Freq
(µVrms)
Iout
Source
(mA)
Iout
Sink
(mA)
Pkg
-20
1280
36
1.9
1.6
20
10
SOIC-8
-30
0
0
-10
200
400
600
800
1000
Time (Hrs)
Term Drift Data (1000 Hrs)
ISL21090ISL21090
LongLong
Term
Drift Data (1000 Hrs)
www.intersil.com/industrial_process_control | 11
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Analog Output
Sensors
Control
Power
Real Time Clock
RTC Modules with Embedded Crystal and Temp Comp: ISL12022M
3 in 1 RTC Module
Block Diagram
(RTC + Embedded
Crystal + Temp Sensor)
ISL12022M
Achieves Better than
±5ppm Accuracy
Crystal
Oscillator
Frequency
Control
2.7V to 5.5V
POR
Switch
±
1.8V to 5.5V
• ±5ppm Accuracy (-40°C to +85°C)
-- Factory Programmed RTC for Optimal Accuracy
-- Onboard Temperature Sensor
-- Embedded Crystal
• Reliable Timekeeping & Power Management
-- Backup Battery Management
-- Vdd and Battery Status Monitors and Switchover
Timestamp
-- Battery ResealTM Function Extends Battery Shelf
Life
• User Programmability
-- I2C Interface
-- 128 Bytes Battery-Backed User SRAM
• See Also
-- ISL12020M (DFN 3 in 1); ISL12022 and ISL12023
Standalone RTCs
µP
Calendar
Batterybacked
User SRAM
IRQ/FOUT
High Accuracy Even in Extreme Temperature Conditions
ISL12022M Compensated
Crystal Drift
0.0
5
FOUT FREQUENCY ERROR (ppm)
-20.0
FOUT (ppm)
-40.0
-60.0
-80.0
-100.0
-120.0
-140.0
-160.0
-40
CPU Supervisory
Function
Uncompensated Crystal Drift
-20
0
20
40
Temperature (°C)
POR
Watchdog Timer
Seal
Backup
1000
1
15
N
N
Y
Y
Shared Pin
128 Bytes
ISL12022M
1000
1
15
N
N
Y
Y
Shared Pin
128 Bytes
ISL12022MA
1000
1
15
N
N
Y
Y
Shared Pin
128 Bytes
ISL12022M-R5421
1000
1
15
N
N
Y
Y
Shared Pin
128 Bytes
12 | www.intersil.com/industrial_process_control
I2C
Battery or
Super Cap
Alarms
ISL12020M
Brown-out
Alarm
Battery
ReSeal™
VBAT
Selectable
Frequency
Output
Device
Clock
Single
Alarm
VTRIP
Key Features
Temp
Sensor
Compensation
Registers
Power Control
VDD
IBAT
(nA)
Embedded Temperature
Sensor
Embedded Crystal
60
80
100
Better than ±5.0ppm
over -40 to +85°C!
4
3
2
1
0
-1
-2
-3
-4
-5
-40
-20
0
20
40
TEMPERATURE (°C)
60
80
Battery
IRQ
FOUT
SRAM
Other Functions
• Battery Switchover Time Stamp
• Battery Status Monitor
• Battery Switchover Time Stamp
• Battery Status Monitor
• Enhanced Environmental MoistureTolerance
• Firmware Compatible with ISL12020M and
ISL12022M
• Enhanced ESD Performance
• Firmware Compatible with ISL12020M and
ISL12022M
Package
20 Ld DFN
20 Ld SOIC
Enhanced
20 Ld SOIC
Enhanced
20 Ld SOIC
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
PLC
Analog Input
Analog Output
Control
Sensors
Power
HV Dual Supply Power Solution
+
L1
6.8µH
C2
-
4.7µF
VDDOUT
VDD
C0
5µF
NEN
NSYNC
- 20.99V
-
C3
4.7µF
D3
+
VOUT(positive)
LX
OSCILLATOR
AND
CONTROL
5V
D2
GND
D1
Q1
VOUT
20V
V0
20.99V
+
C1
4.7µF
-
R1
383kΩ
ISL97701
5V
R2
22.2kΩ
33.2kΩ
-20V
100kΩ
V+
+
-
R3
FB
VOUT(negative)
R6
ISL28108
R5
100kΩ
V-
V-
+
V+
5V
R4
ISL28108
100kΩ
For more information, refer to AN1673 “Application Circuit to generate
Positive and Negative Supplies Using ISL97701 Boost Regulator”.
Integrated FET Boost Regulator: ISL97701
Up to 2.5W Output Power Delivered in a 3x3mm TDFN Package
3.2
2.9
2.6
POUT (W)
Boost Regulator
for Positive and
Negative Supplies
2.3
2.0
1.7
1.4
1.1
0.8
0.5
2.3
2.7
3.1
3.5
3.9
VIN (V)
4.3
4.7
5.1
5.5
RECOMMENDED MAXIMUM OUTPUT POWER vs INPUT VOLTAGE
Highly Integrated Design Reduces External Components
Integrated
Schottky diode
L1
•
•
•
•
•
•
•
•
•
Up to 87% Efficiency
2.3V to 5.5V Input
Up to 28V Output
Integrated Boost Schottky Diode
Input Voltage Disconnect Switch for Micro Power
Shutdown
Synchronization Input
10 Ld 3x3 DFN Package
Pb-free (RoHS Compliant)
Up to 2.5W Output Power
6.8µH
VDDOUT
2.3V TO 5.5V
VDD
C0
5µF
NEN
NSYNC
LX
VOUT
OSCILLATOR
AND
CONTROL
Key Features
Integrated input
disconnect switch
enables true micro
power shutdown.
C1
3.3µF
GND
Synchronization input
to lock to preferred
switching frequency to
reduce unwanted noise
in the system.
VDD+2V TO 30V
FB
ISL97701
R1
390kΩ
Internally
compensated boost
requires only a small
3.3µF output cap for
stability.
R2
39kΩ
NOTE: VOUT = (390k + 39k)/39k*1.15V = 12.65V
www.intersil.com/industrial_process_control | 13
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
DCS (Distributed Control Systems) Application
Analog Input
Analog Output
Control
Sensors
Power
High Voltage and Low Voltage, Low Power Solutions
For Distributed Control Systems
Non-Isolated
HV Dual Supply
Wide VIN
Buck Regulator
Super Voltage
Converter
ISL97701
ISL85001
ICL7660S
+V
-V
+V
-V
Power Supply Solutions
High Voltage Precision Op Amps
• Low Noise
• Low Power
• Dual or Single Supply
Dual Supply
to Single Supply
Attenuator
ISL28118/218/418
ISL28108/208/408
ISL28117/217/417
-
+10V to +15V
Single Supply
Voltage Inputs
Vin+
+
-
0V to 10V
Analog Input
Low Noise VREF
ISL28208
ISL28133/ISL28134
V+
+
VREF
Vin-
• Low Noise
• Low Offset
• Ground sense inputs
• Rail-Rail Output
• Low Power option
-
V+
2.5V
Vo+
Gnd
Gnd
ISL21090
VREF ISL21009
2.5V
SAR
ISL21090
ISL21009
Vo-
+
ADC
ISL267xx
ISL263xx
Gnd
SAR Converters
• Excellent Linearity: ±0.5LSB DNL, ±1LSB INL
• Many Competitor Pin-Pin Compatiable Solutions
Zero Drift, Precision Op Amps
• Accuracy Over Temperature Drift
Offset: 5µV
Offset Drift: 50nV/C
Low Power Solutions (3V)
ISL28133 @ 50µW
ISL263xx @ 5mW
ISL21009 @ 540µW
ISL28133/233/433 (1.8V to 5.5V) Low Power
ISL28134 (2.4V to 5.5V) Low Noise
Low Noise VREF
ISL21090
VREF
ISL21009
2.5V
SAR
+
High Impedance
Analog Input
• Low Noise
• Low Offset
• Low Bias Current
14 | www.intersil.com/industrial_process_control
-
ISL267xx
ISL263xx
ADC
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
DCS
Analog Output
Analog Input
Control
Sensors
Power
12-Bit SAR ADC: ISL2671286, ISL267817
Low Cost SAR A/D
Converter Family
Block Diagram
VREF
VDD
Intersil P/N
ISL267440 (Coming soon)
Competitor’s P/N
AD7440 (ADI)
Device Description
ISL267817
AIN+
SAR
Logic
AIN–
Serial
Interface
SCLK
DOUT
CSB
DAC
• 100% Drop-In Compatible with Performance Equal
or Better than Highest Grades
• Improved Alternative to Popular Competing Devices
• Simple SPI-Compatible Serial Digital Interface
• Guaranteed No Missing Codes
• Low Operating Power
-- 2.15mW (200kSPS)
• Power-Down Current Between Conversions: 3μA
• Excellent Differential Non-Linearity (1.0LSB max)
• Available in MSOP, SOT-23 and SOIC Packages
DAC
Key Features
VREF
GND
Resolution (bits)
Conversion Rate (kSPS)
10
1000
10 Bit 1MSPS SAR ADC
Packages (All 8 lead)
SOT-23, MSOP
ISL267450 (Coming soon)
AD7450 (ADI)
12 Bit 1MSPS SAR ADC
12
1000
SOIC, MSOP
ISL267450A (Coming soon)
AD7450A (ADI)
12 Bit 1MSPS SAR ADC
12
1000
SOT-23, MSOP
ISL267452 (Coming soon)
AD7452 (ADI)
12 Bit 555kSPS SAR ADC
12
555
SOT-23
ISL2671286 (Sampling)
ADS1286 (TI)
12 Bit Single Ended 20kHz SAR ADC
12
20
SOIC
ISL267817 (Sampling)
ADS7817 (TI)
12 Bit 200kSPS SAR ADC
12
200
SOIC, MSOP
ISL26708 (Coming soon)
Proprietary
8 Bit 1MSPS SAR ADC
8
1000
3x3 DFN, SOT-23
ISL26710 (Coming soon)
Proprietary
10 Bit 1MSPS SAR ADC
10
1000
3x3 DFN, SOT-23
ISL26712 (Coming soon)
Proprietary
12 Bit Single Ended 20kHz SAR ADC
12
1000
3x3 DFN, SOT-23
Evalboard
Available!
Key Features
• Standard Buck Controller with Integrated
Switching Power MOSFET
• Integrated Boot Diode
• Wide Input Voltage Range
-- Fixed 5V ±10%
-- Variable 5.5V to 25V
• PWM Output Voltage Adjustable from 0.6V to 19V
with Continuous Output Current up to 1A
• Externally Adjustable Soft-Start Time
• “Power OK” and “Enable”
Typical Application : Positive Vout
R3 C3
301 100pF
C2
2.2nF
COMP
C5
0.1µF
FB
R4
3.16k
SS
1A, High VIN STD
Buck Regulator
Integrated FET Buck Regulators: ISL85001
R2
31k
VOUT
R1
10k
C1
10pF
VIN
5.5V TO 25V
C9
10µF
EN
ISL85001
PG
L
22µH
PHASE
C10
BOOT 0.1µF
GND
D
B340LB
VOUT = 2.5V
C11
47µF
VDD
C13
1µF
Typical Application : Negative Vout
Vin
+
U1
12
1
2
11
10
3
4
9
5
8
6
+
7
13
GND
ISL8500 / ISL85001
-Vout
www.intersil.com/industrial_process_control | 15
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
DCS
Analog Input
Analog Output
Sensors
Control
Power
RS-485/422
RS-485/RS-422 Transceivers: ISL315xE, ISL317xE
RS-485/RS-422 Family
of Transceivers with the
Highest Noise Immunity
and ESD Protection in
Small Packages
Enhanced Noise Immunity
60% Higher Output Voltage (ISL315xE)
Intersil’s
ISL315xE
2.4V
RS-485
Standard
1.5V
1
1.5
2
Provides enhanced noise immunity
and can drive longer cable lengths
or more cable terminations.
2.5
Output Voltage (V)
Space-saving Small Package
Key Features
• 60% Higher Output Voltage. 2.4V min vs. typical 1.5V min
• IEC61000 ESD Protected I/O Pins
• True 1/8 Unit Load
50%
r
alle
Sm
8 Ld SOIC
8 Ld MSOP
Typical Operating Circuit
Full Fail-Safe Rx
predictable performance
when bus faults occur.
+3.3V (ISL317xE)
+5V (ISL315xE)
3.3V or 5V operation
+3.3V (ISL317xE)
+5V (ISL315xE)
IEC61000-4-2 ESD Protection
±15kV Airgap discharge, ±8kV contact
discharge (half-duplex versions).
ISL315xE
ISL317xE
Hot Plug Capability
prevents data
corruption during
power-up on an
active bus.
ISL315xE
ISL317xE
Fractional Unit Load Rx
allows up to 256 devices on
the bus without expensive
repeaters.
3V-5.5V RS-485/RS-422 Transceivers with Fractional UL, 15kV ESD, Full Failsafe
SHDN
ICC
(µA)
Device
5V
ISL3150E
256
Full
0.115
800/700
0.07
ISL3152E
256
Half
0.115
800/700
0.07
ISL3153E
ISL3155E
ISL3156E
ISL3158E
3.3V
ISL3170E
ISL3172E
ISL3173E
ISL3175E
ISL3176E
ISL3178E
256
256
256
256
Full
Half
Full
Half
1
1
20
20
800/700
800/700
800/700
800/700
0.07
0.07
0.07
0.07
256
256
256
256
256
256
Data
Half/Full Rate
Duplex (Mbps)
IS EN/
DIS
(µA)
Devices
Allowed
on Bus
Full
Half
Full
Half
Full
Half
0.25
0.25
0.5
0.5
20
20
510/480
510/480
510/480
510/480
510/480
510/480
0.01
0.01
0.01
0.01
0.01
0.01
16 | www.intersil.com/industrial_process_control
VCC
Range
(+V)
Package
4.5 to 5.5 10 Ld MSOP, 14 Ld SOIC
MSOP, 8 Ld PDIP,
4.5 to 5.5 88 Ld
Ld SOIC
4.5 to 5.5 10 Ld MSOP, 14 Ld SOIC
4.5 to 5.5 8 Ld MSOP, 8 Ld SOIC
4.5 to 5.5 10 Ld MSOP, 14 Ld SOIC
4.5 to 5.5 8 Ld MSOP, 8 Ld SOIC
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
3.0 to 3.6
10 Ld MSOP, 14 Ld SOIC
8 Ld MSOP, 8 Ld SOIC
10 Ld MSOP, 14 Ld SOIC
8 Ld MSOP, 8 Ld SOIC
10 Ld MSOP, 14 Ld SOIC
8 Ld MSOP, 8 Ld SOIC
The ISL3261x single Tx/Rx RS-485/422 operate at the
industry’s lowest supply voltage, 1.8V, while drawing very little
power. Designers can easily meet strict power budgets for
battery and remote sensing applications.
1.8V RS-485/422 Tx, Rx, and Transceivers with Ultra Low Supply Current
for Remote or Solar Powered Sensor Communication
Part
Number
ISL32610E
ISL32611E
ISL32612E
ISL32613E
ISL32614E
ISL3260xE
(coming soon)
Tx
Rx
Supply
Range
Data Rate
kbps
ICC
(µA)
max
Shutdown
Current
(µA)
max
ESD rating
Pkg
0
0
0
1
1
1
1
1
0
0
1.8-3.6V
1.8-3.6V
1.8-3.6V
1.8-3.6V
1.8-3.6V
256/500
256/500
256/500
256/500
256/500
110
110
110
80
80
N/A
7
7
2
2
IEC61000
IEC61000
IEC61000
IEC61000
IEC61000
1
1
1.8-3.6V
128/460
85
1
IEC61000
SOT23
SOT23
SOT23
SOT23
SOT23
SOIC/
MSOP
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
DCS
Analog Input
Analog Output
Control
Power
Sensors
Wireless Strain Gauge Sensor
Low Power Analog Signal Conditioning
High Voltage LDO
Wide Vin Boost
Regulator
ISL78301
ISL98012
Power Supply Solutions
ISL54051
Strain
Gauge
Sensor
Wireless Transmitter
IN-
V+
12-14bit
SAR
ADC
Out+
IN+
V-
51µW
3.3mW
ISL2671286
ISL2632X
ISL28133
12-Bit, 20kSPS SAR ADC
• SOT-23 package
3mm x 3mm DFN
Ultralow Power Chopper Stabilized
Zero Offset Op Amp
• SOT-23 package
1.6mm x 1.6mm µTDFN
Evalboard
Available!
5V Op Amps: ISL28233, ISL28433
Micropower,
Chopper Stabilized, RRIO
Operational Amplifiers
Zero Drift
VREF
ISL21009
ISL21090
Zero Drift
The ISL28233 and ISL28433 are dual and quad
micropower, chopper stabilized operational
amplifiers that are optimized for single and dual
supply operation from 1.8V to 6.0V. Their low supply
current of 18μA and wide input range enable the
ISL28233, ISL28433 to be excellent general purpose
op amps for a wide range of applications.
Temp
Diode
+
Part Number
Single
ISL28133*
ISL28134
Dual
Quad
ISL28233 ISL28433
Min
Max
Rail-To-Rail
In
Out
V-
Digital Potentiometer
ISL22323
Typical Application Circuit - Temperature Measurement
Best in Class Performance for Precision and Drift
Low Input Offset Voltage: 6μV, Max.
Low Offset Drift: 0.05μV/°C, Max.
Input Bias Current: 180pA, Max.
Noise (0.01Hz to 10Hz): 1.0μV P-P, Typ.
Quiescent Current (per amp): 8μA, Typ.
Single Supply Range: 65V to +6.0V
Temperature Range: -40°C to +125°C
Rail-to-Rail Inputs and Output
Supply
Voltage (V)
V+
Intersil
Low Drift Precision Op Amps
iso-block
Key Features
0.50
0.40
0.30
0.20
VOS Drift (µV)
•
•
•
•
•
•
•
•
TX
µController
0.10
0.00
-0.10
-0.20
-0.30
-0.40
-0.50
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
Months
ISL28233 Long Term VOS Drift
Long Term VOS Drift
Vos Max
@ 25°C
TCVos
Max
Ib Max
@
25°C
CMRR
min @
25°C
PSRR
min @
25°C
Is Max
@
25°C
µV
µV/°C
nA
dB
dB
mA
GBW
Slew
Rate
Noise
0.1 to
10Hz
Voltage
Noise @
1kHz
MHz
V/µs
µVpp
nV/√Hz
Single
Package
1.8
5.5
Yes
Yes
6
0.05
0.18
118
110
0.025
0.4
0.2
1
65
SC70, SOT23,
TDFN
2.25
6
Yes
Yes
2.5
0.015
0.3
120
120
0.900
3.5
1.5
0.25
10
SOIC
Dual
Quad
MSOP, SOIC, SOIC, TSSOP,
TDFN
TDFN
*Some specifications will differ, please check data sheet for actual parameters and/or conditions
www.intersil.com/industrial_process_control | 17
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
Additional Recommended Industrial Products
Where Used
Part Numbers
ISL28127, ISL28127
Analog Input Modules
Sensor Signal Conditioning
Gain Blocks, Filtering
Output Drivers
40V, Low Noise, Low VOS, Low IBIAS, Low Power, Low TC VOS Drift
ISL28107, ISL28207, ISL28407
40V, Ultra Low IBIAS Drift, Low VOS &, Low Power
Voltage
Reference
Interface
Analog Input Modules
Sensor Signal Conditioning
Sensor Calibration & Bias
ADC Reference
CPU Reference
Non Isolated Interface to
Micro Controller
40V, Low Noise, Single Supply, RRO OPA
ISL28110/210
40V, Low Noise, JFET Input OPA
ISL28176, ISL28276, ISL28476
5V, Low Power, Low Noise, No VCM Distortion
ISL28113, ISL28213, ISL28413
5V Low Cost 2MHz CMOS OPA
ISL28130/ISL28230/ISL28430
5V Low Cost, MicroPower OPA
ISL28133/ISL28233/ISL28433
5V MicroPower, Chopper Stabilized OPA
ISL28134
5V, Low Noise, Chopper Stabilized OPA
EL8170, ISL28270, EL8173
Digital
Potentiometers
(DCPs)
Sensor Calibration & Bias
Input Module Amp Gain
Adjustment
Output Module Amp Gain
Adjustment
36V Low Noise Bandgap Reference, High Accuracy
16V Low Power and Low Noise, High Accuracy
ISL21060
5V Micro Power, VOUT Force & Sense
ISL60002
5V Ultra Low Power, High Accuracy
ISL317xE
3V IEC6000 ESD RS485 w/ Hot Plug & Fail Safe
ISL315xE
5V IEC6000 ESD RS485 w/ Hot Plug & Fail Safe
ISL328x/9x
Single Tx/Rx RS-485/422
ISL32x7xE
Quad Tx/Rx RS-485/422
DG409
DG408
External Micro Controller Clock
Single/Dual Channel ±15kV ESD 3V, Dual Protocol (RS-232/RS-485)
40V Supply, Low RON, Low Charge Injection, Wide Input Voltage Range
16:1 SE or 8:1 Diff Options
40V Supply, 70V Over Voltage Protection, Wide Input Voltage Range
16:1 SE, 8:1 Diff or 8:1 SE, 4:1 Diff, Options
ISL22316, ISL22326, ISL22346
128 Tap, 125°C Non Volatile, Low Noise, Low Power, I2C Interface,
Shutdown
ISL96017
128 Tap, Non Volatile, I2C , DCP with 16k bits User Memory, Small
Package
ISL22317
128 Tap, 1% Accurate Non Volatile, I2C Interface DCP
ISL95811
256 Tap, Non Volatile, Low Power, I2C Interface DCP with 5 Bytes of
User Memory
ISL22313, ISL22323, ISL22343
256 Tap, Dual Supply, Non Volatile, Low Power, I2C Interface
ISL22414, ISL22424, ISL22444
256 Tap, Dual Supply, Non Volatile, Low Power, SPI Interface
ISL12020M, ISL12022M
ISL12057, ISL12058, ISL12059
18 | www.intersil.com/industrial_process_control
±15kV ESD 5V, Dual Protocol (RS-232/RS-485)
HI-506, HI-507
HI-508, HI509
ISL12022, ISL12023
RTC
Low Power, Low Offset, High CMRR, Enable Pin
Wide Input Common Mode Range, Rail to Rail Input and Output
ISL21009
ISL3330/1/2/3
Switch/Mux
5V Low Cost 5MHz CMOS OPA
ISL21090
ISL81387, ISL41387
Direct Sensor Input to AFE
Between Input Amp and ADC
Between Output Module DAC and
Actuator Driver
40V, Low Power, Single Supply, RRO OPA
ISL28118/218
ISL28114, ISL28124, ISL28414
Instrumentation
Amps
40V, Ultra Low Noise, Low VOS & Drift
ISL28117, ISL28217, ISL28417
ISL28108/208/408
Op Amps
Key Features / Advantages
2:1 RTC + Temp Sensor, Many Control Functions
3:1 RTC + Temp Sensor + Crystal, 5ppm Temp Accuracy
1.8V - 3.6V, Low Power, Low Cost Basic RTC
INTERSIL SELECTION GUIDE | INDUSTRIAL PROCESS CONTROL SOLUTIONS
Where Used
Switching
Controllers
High Current Distributed Rail
Processor/FPGA Power
Isolated
Controllers
Isolated Power Conversion
Part Numbers
ISL8107, ISL8105A, ISL8118,
ISL6525
Switching
Regulators
Single Output Boost Regulators
Multi Output Regulators, Interleaved Output Voltages
ISL6840-ISL6845
1.5% Precision Error Amp, Fast Peak Current Sensing
ISL6721-23
ISL8013A/14A, ISL8022
Power Monitors
Monitoring Voltage Rails
Power
Sequencers
Sequencing Voltage Rails On/Off
Wide VIN Regulators
Single and Dual High Current Highly Configurable Regulators
Low IQ High Frequency Regulator
ISL97701
Boost Regulator with Integrated Schottky and Input Disconnect Switch
ISL98012
Wide Input Voltage, Adjustable Frequency Boost Regulator
ISL97516
600kHz/1.2MHz PWM Step-Up Regulator
ISL97519
1% Output Accuracy PWM Step-Up Regulator with 1.294V Reference
ISL97519A
1% Output Accuracy PWM Step-Up Regulator with 1.24V Reference
ISL80101/2/3
LDO
Fast Transient Response, Integrated Soft-start, OV, OI, UV Protection
ISL9103/4
ISL97656
Low Noise Point of Load
Regulation
Easy to Use Controllers, Input Voltage Range up to 75V
ISL8120, ISL9440
ISL8500, ISL8501, ISL85033
Point of Load Regulation
Key Features / Advantages
High Current PWM Step-Up Regulator with 1.24V Reference
High Performance 1A/2A/3A LDO
ISL6719, ISL6720A
High Input Voltage Up to 100V
ISL9003A/ISL9000A
Single and Dual 150mA Low Noise with Low IQ, High PSRR
ISL78302, ISL78307
Low Power Linear Regulator for Automotive Applications
ICL7660, ICL7660A, ICL7660S
Charge Pumps (can be used as +ve to -ve voltage converter)
ISL88002, ISL88031
Ultra Low Power Voltage Supervisor, Single to Quad Monitors
ISL6132
ISL6123-28
Dual Output Control, 2 UV, 2 OV Monitors
Quad Supply Sequencing
www.intersil.com/industrial_process_control | 19
Design Resources
iSIM
Advanced design tool for creating complex solutions in 4 easy steps.
www.intersil.com/isim
1
2
Design Requirements Interview
Simply enter your design requirements, such as input and output
voltage and current etc.
3
iSim automatically calculates optimum loop compensation and
calculates appropriate values for resistors and capacitors.
4
Design Verification by Remote Simulation
Your design is displayed in an Online Schematic, which allows you to test
your application in a virtual test bed. iSim allows AC, transient analysis.
NORTH AMERICA
WEST COAST
Intersil Headquarters
1001 Murphy Ranch Road
Milpitas, CA 95035
(TEL) 408-432-8888
(FAX) 408-434-5351
1-888-INTERSIL
1-888-468-3774
EAST COAST
1650 Robert J Conlan Blvd NE
Palm Bay, FL 32905
(TEL) 321-724-7000
(FAX) 321-729-7320
1-888-INTERSIL
1-888-468-3774
Design Configuration
Summary, Download, Design & More
Once the design has been verified, iSim generates a Bill of Materials
and a comprehensive design report including simulation results,
schematic and design data.
EUROPE
ASIA PACIFIC
JAPAN
Oskar-Messter-Str. 29
D-85737 Ismaning
Germany
(TEL) +49-89-46263-0
(FAX) +49-89-46263-148
Suite 501, 5/F,
Ocean Centre, Harbour City,
Tsimshatsui, Kowloon
Hong Kong
(TEL) +852-2709-7600
(FAX) +852-2730-1433
6F, Mita Nitto Daibiru
3-11-36, Mita, Minato-ku
Tokyo, 108-0073 Japan
(TEL) +81-3-5439-2311
(FAX) +81-3-5439-2300
LC-091.1 Printed in USA 12/11 © 2011 Intersil Americas Inc. All Rights Reserved. The following are trademarks or registered
trademarks of Intersil Americas Inc.: Intersil, Intersil logo, “i” and Design. All other trademarks are the property of the respective
trademark owners.
™
Similar pages