Part Number: www.SunLED.com BMR34D T-1 (3mm) BLINKING LED LAMP Features T-1 PACKAGE WITH RECTANGULAR BASE. WITH BUILT-IN BLINKING IC. OPERATION VOLTAGE FROM 3.5V TO 14V. BLINKING FREQUENCY FROM 3.0Hz TO 1.5Hz. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) MR (GaAlAs) Unit 8 mA mW Forward Current (Typ.) (VR=5V) IF 22 mA °C Supply Current (Typ.) (VF=3.5V) ISON 8 mA Supply Current (Typ.) (VF=14V) ISON 44 mA f 1.5~3 Hz Wavelength of Peak Emission (Typ.) λP 660 nm Wavelength of Dominant Emission (Typ.) λD 640 nm Spectral Line Full Width At Half-Maximum (Typ.) Δλ 20 nm 0.5 V Forward Voltage VF 14 V Power Dissipation PT 310 Operating Temperature TA -40 ~ +70 Tstg -40 ~ +85 Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds BMR34D Emitting Color Red Published Date : MAR 24,2008 Emitting Material GaAlAs Unit IF VR Part Number MR (GaAlAs) Forward Current (Min.) (VF=3.5V) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) Blink Frequency (Min.~Max.) (VF=3.5V~14V) Lens-color Red Diffused Drawing No : SDSA3459 Luminous Intensity (V= 9V) mcd min. typ. 110 198 V3 Wavelength nm λP Viewing Angle 2 θ 1/2 660 60° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com BMR34D T-1 (3mm) BLINKING LED LAMP MR Published Date : MAR 24,2008 Drawing No : SDSA3459 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com Published Date : MAR 24,2008 BMR34D T-1 (3mm) BLINKING LED LAMP Drawing No : SDSA3459 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com T-1 (3mm) BLINKING LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 24,2008 BMR34D Drawing No : SDSA3459 BMR34D V3 Checked : B.L.LIU P.4/4