IRFH5104PbF HEXFET® Power MOSFET VDS RDS(on) max (@VGS = 10V) Qg (typical) RG (typical) ID 40 V 3.5 mΩ 53 1.4 nC 100 (@Tc(Bottom) = 25°C) Ω h A PQFN 5X6 mm Applications • • • • Secondary Side Synchronous Rectification Inverters for DC Motors DC-DC Brick Applications Boost Converters Features and Benefits Features Low RDSon (≤ 3.5mΩ) Low Thermal Resistance to PCB (≤ 1.1°C/W) 100% Rg tested Low Profile (≤ 0.9 mm) results in Industry-Standard Pinout ⇒ Compatible with Existing Surface Mount Techniques RoHS Compliant Containing no Lead, no Bromide and no Halogen MSL1, Industrial Qualification Orderable part number IRFH5104TRPBF IRFH5104TR2PBF Package Type PQFN 5mm x 6mm PQFN 5mm x 6mm Benefits Lower Conduction Losses Enables better thermal dissipation Increased Reliability Increased Power Density Multi-Vendor Compatibility Easier Manufacturing Environmentally Friendlier Increased Reliability Standard Pack Form Quantity Tape and Reel 4000 Tape and Reel 1000 Note EOL notice #259 Absolute Maximum Ratings VDS VGS ID @ TA = 25°C ID @ TA = 70°C ID @ TC(Bottom) = 25°C ID @ TC(Bottom) = 100°C IDM PD @TA = 25°C PD @ TC(Bottom) = 25°C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Power Dissipation TJ TSTG Linear Derating Factor Operating Junction and Storage Temperature Range g g Max. 40 ±20 24 19 100 86 400 3.6 114 Units 0.029 -55 to + 150 W/°C h c g V A W °C Notes through are on page 8 1 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback January 6, 2014 IRFH5104PbF Static @ TJ = 25°C (unless otherwise specified) BVDSS ∆ΒVDSS/∆TJ RDS(on) VGS(th) ∆VGS(th) IDSS IGSS Output Charge Min. 40 ––– ––– 2.0 ––– ––– ––– ––– ––– 56 ––– ––– ––– ––– ––– ––– ––– Typ. ––– 0.05 2.9 ––– -8.9 ––– ––– ––– ––– ––– 53 10 4.8 19 19.2 23.8 22 Conditions Max. Units ––– V VGS = 0V, ID = 250µA ––– V/°C Reference to 25°C, ID = 1mA 3.5 mΩ VGS = 10V, ID = 50A 4.0 V VDS = VGS, ID = 100µA ––– mV/°C VDS = 40V, VGS = 0V 20 µA VDS = 40V, VGS = 0V, TJ = 125°C 250 VGS = 20V 100 nA -100 VGS = -20V ––– S VDS = 15V, ID = 50A 80 ––– VDS = 20V VGS = 10V ––– nC ––– ID = 50A ––– See Fig.17 & 18 ––– ––– nC VDS = 16V, VGS = 0V Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance ––– ––– ––– ––– ––– ––– ––– ––– 1.4 9.5 15 20 10 3120 650 310 ––– ––– ––– ––– ––– ––– ––– ––– Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Gate Threshold Voltage Coefficient Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Forward Transconductance Total Gate Charge Pre-Vth Gate-to-Source Charge Post-Vth Gate-to-Source Charge Gate-to-Drain Charge Gate Charge Overdrive Switch Charge (Qgs2 + Qgd) gfs Qg Qgs1 Qgs2 Qgd Qgodr Qsw Qoss RG td(on) tr td(off) tf Ciss Coss Crss e Ω ns pF VDD = 20V, VGS = 10V ID = 50A RG=1.7Ω See Fig.15 VGS = 0V VDS = 25V ƒ = 1.0MHz Avalanche Characteristics Parameter Single Pulse Avalanche Energy Avalanche Current EAS IAR Diode Characteristics c Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time IS ISM VSD trr Qrr ton Typ. ––– ––– d Units mJ A Max. 120 50 Min. Typ. Max. Units h ––– ––– 100 c ––– ––– 400 A Conditions MOSFET symbol showing the integral reverse D G p-n junction diode. TJ = 25°C, IS = 50A, VGS = 0V TJ = 25°C, IF = 50A, VDD = 20V di/dt = 500A/µs ––– ––– 1.3 V ––– 31 47 ns ––– 130 195 nC Time is dominated by parasitic Inductance e S e Thermal Resistance RθJC (Bottom) RθJC (Top) RθJA RθJA (<10s) 2 f f Junction-to-Case Junction-to-Case Junction-to-Ambient Junction-to-Ambient Parameter g g www.irf.com © 2014 International Rectifier Typ. ––– ––– ––– ––– Submit Datasheet Feedback Max. 1.1 15 35 22 Units °C/W January 6, 2014 IRFH5104PbF 1000 1000 VGS 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.8V 4.5V 100 BOTTOM TOP ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) TOP 100 10 1 ≤60µs PULSE WIDTH Tj = 25°C BOTTOM 10 4.5V ≤60µs PULSE WIDTH Tj = 150°C 4.5V 0.1 0.1 1 1 10 100 1000 0.1 V DS, Drain-to-Source Voltage (V) 100 1000 1.8 RDS(on) , Drain-to-Source On Resistance (Normalized) ID, Drain-to-Source Current (A) 10 Fig 2. Typical Output Characteristics 1000 100 T J = 150°C 10 T J = 25°C 1 VDS = 15V ≤60µs PULSE WIDTH 0.1 ID = 50A VGS = 10V 1.6 1.4 1.2 1.0 0.8 0.6 3 4 5 6 7 8 9 10 -60 -40 -20 0 Fig 3. Typical Transfer Characteristics 100000 Fig 4. Normalized On-Resistance vs. Temperature 14.0 VGS = 0V, f = 1 MHZ C iss = C gs + C gd, C ds SHORTED C rss = C gd VGS, Gate-to-Source Voltage (V) ID= 50A C oss = C ds + C gd 10000 Ciss Coss 1000 20 40 60 80 100 120 140 160 T J , Junction Temperature (°C) VGS, Gate-to-Source Voltage (V) C, Capacitance (pF) 1 V DS, Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Crss 12.0 VDS= 32V VDS= 20V 10.0 VDS= 8.0V 8.0 6.0 4.0 2.0 0.0 100 1 10 0 100 Fig 5. Typical Capacitance vs.Drain-to-Source Voltage www.irf.com © 2014 International Rectifier 10 20 30 40 50 60 70 QG, Total Gate Charge (nC) VDS, Drain-to-Source Voltage (V) 3 VGS 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.8V 4.5V Fig 6. Typical Gate Charge vs.Gate-to-Source Voltage Submit Datasheet Feedback January 6, 2014 IRFH5104PbF 1000 ID, Drain-to-Source Current (A) ISD, Reverse Drain Current (A) 1000 T J = 150°C 100 T J = 25°C 10 OPERATION IN THIS AREA LIMITED BY R DS(on) 100µsec 1msec 100 10msec 10 Tc = 25°C Tj = 150°C Single Pulse VGS = 0V 1.0 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1 VSD, Source-to-Drain Voltage (V) 10 100 VDS, Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 150 5.0 VGS(th) , Gate threshold Voltage (V) Limited By Package 125 ID, Drain Current (A) DC 100 75 50 25 0 4.5 4.0 3.5 3.0 ID = 100µA ID = 500µA 2.5 ID = 1.0mA ID = 1.0A 2.0 1.5 25 50 75 100 125 150 -75 -50 -25 T C , Case Temperature (°C) 0 25 50 75 100 125 150 T J , Temperature ( °C ) Fig 10. Threshold Voltage vs. Temperature Fig 9. Maximum Drain Current vs. Case (Bottom) Temperature Thermal Response ( Z thJC ) °C/W 10 1 D = 0.50 0.20 0.10 0.05 0.1 0.02 0.01 0.01 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc SINGLE PULSE ( THERMAL RESPONSE ) 0.001 1E-006 1E-005 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case (Bottom) 4 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback January 6, 2014 10 500 ID = 50A EAS , Single Pulse Avalanche Energy (mJ) RDS(on), Drain-to -Source On Resistance (m Ω) IRFH5104PbF 8 6 T J = 125°C 4 2 T J = 25°C 0 ID 8.3A 19A BOTTOM 50A TOP 400 300 200 100 0 4 6 8 10 12 14 16 18 20 25 50 75 100 125 150 Starting T J , Junction Temperature (°C) VGS, Gate -to -Source Voltage (V) Fig 12. On-Resistance vs. Gate Voltage Fig 13. Maximum Avalanche Energy vs. Drain Current V(BR)DSS tp 15V DRIVER L VDS D.U.T RG + V - DD IAS 20V A Fig 14a. Unclamped Inductive Test Circuit VDS VGS RG RD Fig 14b. Unclamped Inductive Waveforms VDS 90% D.U.T. + -VDD V10V GS Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 Fig 15a. Switching Time Test Circuit 5 I AS 0.01Ω tp www.irf.com © 2014 International Rectifier 10% VGS td(on) tr td(off) tf Fig 15b. Switching Time Waveforms Submit Datasheet Feedback January 6, 2014 IRFH5104PbF D.U.T Driver Gate Drive + - - * D.U.T. ISD Waveform Reverse Recovery Current + RG • • • • dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test P.W. Period VGS=10V Circuit Layout Considerations • Low Stray Inductance • Ground Plane • Low Leakage Inductance Current Transformer - D= Period P.W. + V DD + Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage - Body Diode VDD Forward Drop Inductor Curent ISD Ripple ≤ 5% * VGS = 5V for Logic Level Devices Fig 16. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET® Power MOSFETs Id Vds Vgs L DUT 0 1K S VCC Vgs(th) Qgs1 Qgs2 Fig 17. Gate Charge Test Circuit 6 www.irf.com © 2014 International Rectifier Qgd Qgodr Fig 18. Gate Charge Waveform Submit Datasheet Feedback January 6, 2014 IRFH5104PbF PQFN 5x6 Outline "B" Package Details For more information on board mounting, including footprint and stencil recommendation, please refer to application note AN-1136: http://www.irf.com/technical-info/appnotes/an-1136.pdf For more information on package inspection techniques, please refer to application note AN-1154: http://www.irf.com/technical-info/appnotes/an-1154.pdf PQFN 5x6 Outline "B" Part Marking INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY SITE CODE (Per SCOP 200-002) PIN 1 IDENTIFIER XXXX XYWWX XXXXX PART NUMBER MARKING CODE (Per Marking Spec) LOT CODE (Eng Mode - Min last 4 digits of EATI#) (Prod Mode - 4 digits of SPN code) Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 7 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback January 6, 2014 IRFH5104PbF PQFN 5x6 Outline "B" Tape and Reel Qualification information† Indus trial Qualification level (per JE DE C JE S D47F Moisture Sensitivity Level PQFN 5mm x 6mm RoHS compliant †† ††† guidelines ) MS L1 ††† (per JE DE C J-S T D-020D ) Yes Qualification standards can be found at International Rectifier’s web site http://www.irf.com/product-info/reliability Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information: http://www.irf.com/whoto-call/salesrep/ Applicable version of JEDEC standard at the time of product release. Notes: Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25°C, L = 0.098mH, RG = 25Ω, IAS = 50A. Pulse width ≤ 400µs; duty cycle ≤ 2%. Rθ is measured at TJ of approximately 90°C. When mounted on 1 inch square 2 oz copper pad on 1.5x1.5 in. board of FR-4 material. Calculated continuous current based on maximum allowable junction temperature. Package is limited to 100A by production test capability. Revision History Date Comment 12/16/2013 • Updated ordering information to reflect the End-Of-Life (EOL) of the mini-reel option (EOL notice #259). • Updated data sheet with the new IR corporate template. IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 8 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback January 6, 2014