Anaren A2500R24C The a2500r24c is a high-performance Datasheet

2500 Series
A2500R24C
The A2500R24C is a high-performance, FCC & IC certified and ETSIcompliant connectorized radio module that incorporates the Texas
Instruments CC2500 transceiver chip, all in the industry’s smallest
package: 9 x 12 x 2.5mm.
Features
















Frequency range: 2400-2483.5 MHz
FCC, IC, & ETSI-compliant, shielded package
Digital RSSI output
Programmable output power up to +1.0dBm
High sensitivity (-104 dBm at 2.4 kBaud, 2442
MHz 1% packet error rate)
Ultra-small package size: 9 x 12 x 2.5mm
Industry-standard U.FL connector
LGA footprint
RoHS compliant
Operating temperature -40 to +85˚C
Impedance-controlled, multi-layer PCB
1.8 to 3.6 VDC
Low current consumption (16 mA in RX, 250
kBaud, 2442 MHz)
400 nA sleep mode current consumption
Efficient SPI interface; all registers can be
programmed with one “burst” transfer
Available in tape & reel and matrix tray
Block diagram
Benefits













Minimal RF engineering experience necessary
No additional “Intentional Radiator”
certification required (FCC CFR 47 Part 15, IC
RSS-210, ETSI EN 300 328)
Minimal real estate required
Easily implemented on a two layer PCB
No additional harmonic filtering required
100% RF-tested in production
Common footprint for similar products in family
No additional DC decoupling required
Integrated analog temperature sensor
Excellent receiver selectivity and blocking
performance
Suitable for frequency hopping systems,
thanks to a fast-settling frequency synthesizer
with 90 μs settling time
Impedance-matched balun for optimized
efficiency
Support for asynchronous and synchronous
serial receive/transmit mode for backwards
compatibility with existing radio
communication protocols
PLEASE NOTE: Additional information on the Texas Instruments CC2500
device can be found in the company’s latest datasheet release at
http://www.ti.com
This product is not to be used in any implantable medical device or external
medical device intended to regulate or monitor biological functions, including but
not limited to devices such as pacemakers, defibrillators, cardiac
resynchronization devices, pressure sensors, biochemical stimulators and
neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR
MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE.
Anaren shall not be responsible for any consequential damages arising from the
sale or use of this product for any use of this type. The ultimate user of the
product assumes all risk of personal injury or death arising from a prohibited use.
Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / [email protected]
Layout Information
Product overview
The A2500R24C is a high-performance, FCC & IC
certified and ETSI-compliant connectorized radio
module that incorporates the Texas Instruments
CC2500 transceiver chip in the industry’s smallest
package (9 x 12 x 2.5mm) and is compatible with
all TI-approved software stacks.
Top 2 pads optional for compatibility with other modules. Refer to
User’s Manual for additional layout guidelines. Dimensions in mm.
With an LGA pad footprint and industry-standard
U.FL button connector receptacle, this module is
designed to effortlessly integrate into a wide
range of applications, including: industrial control,
building automation, low-power wireless sensor
networks, lighting control, and automated meter
reading.
The A2500R24C has an RoHS-compliant ENIG
finish and is packaged on tape & reel or in matrix
trays for high-volume automated manufacturing.
Footprint (PWB)
Pin diagram
NC = “NO Connection”.
Pin is NOT connected
internally.
Ground detail (edge)
Ground detail (corner)
DNC = “Do Not Connect”.
Pin reserved for internal
use, ensure mating
footprint pads are isolated.
Nomenclature
GND = “Ground”.
Connect the maximum
number possible (minimum
one for proper operation).
Caution! ESD sensitive device.
Precautions should be used when
handling the device in order to
prevent permanent damage.
A
1
2
3
4
5
6
7
Chip series
Function
Frequency band
Form factor
Design ID
Application
Packaging
(Anaren)
(CC1101, CC110L, CC2500)
(R = radio only)
(x100MHz)
(A = Internal Antenna, C = Connector)
(00 = Default)
(G = General)
(R = Tape/Reel, M = Matrix Tray)
Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / [email protected]
1236a
Similar pages