DF005S THRU DF10S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere DF-S FEATURES 0.04(1.00) Glass Passivated Die Construction Diffused Junction Low Forward Voltage Drop, High Current Capability Surge Overload Rating to 50A Peak Designed for Surface Mount Application Plastic Material-UL Recognition Flammability Classification 94V-0 * This Series is UL Listed Under Recognized Component Index, File Number E95060 0.41(10.40) 0.00(.076) * * * * * * 0.00(.009) 0.01(0.25) 0.05(1.20) 0.01(0.33) 0.24(6.20) 0.29(7.40) 0.26(6.50) 0.31(7.90) 0.06(1.53) 0.04(1.02) 0.34(8.51) 0.32(8.13) 0.13(3.40) 0.09(2.40) 0.20(5.20) 0.20(5.00) MECHANICAL DATA Case : Molded Plastic Terminals : Plated Leads, solderable per MIL-STD-750, Method 2026 Polarity : As marked on Case Mounting Position: Any Weight : 0.38 gram *Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature SYMBOLS DF005S unless otherwise specified. DF01S DF02S DF04S DF06S DF08S DF10S UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage o Maximum average forward rectified current @ TA=40 C Peak forward surge current 8.3ms single half sine-wave I (AV) 1.0 Amps IFSM 50 Amps VF 1.1 Volts superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ IF=1.0 A o Maximum DC reverse current @TC=25 C at rated DC blocking voltage @TC=125 C 10 IR o 500 uA 2 I2t rating for fusing ( t < 8.3ms ) I2t 10.4 A s Typical junction capacitance per element (NOTE 1) CJ 25 pF 110 K/W Typical thermal resistance, junction to ambient (NOTE 2) Operating junction and storage temperature range R JA TJ,TSTG -65 to +150 o C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. (2) Thermal resistance, junction to ambient, measured on PC board with 5.0mm2 (0.03mm thick) land areas. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES DF005S THRU DF10S FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.5 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 50 40 30 20 10 0 0 20 40 60 80 100 120 1 150 10 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT o 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10.00 1.00 0.10 o TJ=25 C 0.01 0.2 100 AMBIENT TEMPERATURE, C PULSE WIDTH=300uS 0.4 0.6 0.8 1.0 1.2 1.4 o TJ=100 C 10.0 1.0 o TJ=25 C 0.10 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 100 o TJ = 25 C 10 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation