Features Typical Applications • ID1 full size card acceptance • Transaction • Card detection sealed switch • POS • Compatible with pick and place and lead free soldering • Identification Mechanical Contact Electrical Data Number of contacts Mechanical life Card insertion force Card extraction force Contact force Card detection switch Insulation resistance Contact resistance max Switching current Dielectric strength 6 or 8 50,000 cycles 10N max 1N min / 10N max 0,4N to 0,7N 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop) 1,8 N max for complete depression Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35mm Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max elect. discontinuity 1µs Full Size CCM04 MK4 Series 1000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Card detection switch Rc card detection switch Dielectric strength Switch current rating Maximum switch power Normally open 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA Environmental Data Packaging Operating temperature Salt mist Damp heat Card detection switch RoHS compliant See table below Soldering Process -40°C to +85°C IEC 512 test number 11f (96 hours) IEC 512 test number 11c (10 days) Sealed against dust Compatible with lead free SMT reflow soldering process Designation Housing Type # of Contacts Contact Force Total Height (mm) Total Dim. (mm) Packaging CCM04-5427LFT standard 8 0,4N to 0,7N 2,65 18,75 X 25 reels of 1,000 pcs CCM04-5436LFT standard 8 0,4N to 0,7N 0,90 18,75 X 26,9 reels of 1,000 pcs CCM04-5468LFT stand-off 8 0,4N to 0,7N 3,5 18,75 X 24 reels of 1,000 pcs CCM04-5454LFT standard 8 0,4N to 0,7N 0,90 18,75 X 26,9 reels of 1,000 pcs CCM04-5455LFT standard 8 0,4N to 0,7N 0,90 18,75 X 26,9 reels of 1,000 pcs Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 17 CCM04 MK4 Series 1,1±0,15 Mated condition 3,81 3,81 40˚0' DETAIL A Scale 10 (0,75) 0,5 2,65±0,05 0,25 ± 0,05 x45˚ CCM04-5427 LFT Full Size 2 11,15 SEE DETAIL A 0,85 2 16,6 0,8 15,15±0,3 9,5±0,3 15,6 B 1,9 0 -0,1 +0,05 -0 0,75±0,15 A 12,9 (15,15) 1,27 2,54 A 0,7 XXXX (1,97) 8 Top card level recommended 2,54 1,75 2 2x ø 1,2 1,5 x 45˚ (2,16) 0,3 A 7,65 A 4 45˚0' 4,4 Pick and place area ø 3,3 0,7 R0, 7 3 A 0,1 18,75 7,5 A B 8x 0,3 11,55 1,1±0,05 2,54 7 6 Card stop 0,9±0,25 0,75 +0,10 -0,05 0,6 11,8 15,45 7,8 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) 1,3 13,2 9,2 1,7 C6 C2 C7 C3 C8 C4 (24,65) SW (25) 3 1,1 2x 2,54 0,2 8x 0,2 2,54 (11,55) C1 2,54 C5 1,3 1,3 C 4 Stand-off area SW Pad Contact foot area 0,8 x 0,7 Plastic outline 3,81 3,81 15,15 2,79 Switch contact foot area 0,85 x 0,7 9,5 Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 18 CCM04 MK4 Series CCM04-5436 LFT DETAIL A Scale 10 (0,75) 1,1±0,15 0,15 +0,03 -0,07 +0,03 0 2 11,15 1,4 8,5±0,3 15,6 (18,4) B 0 -0,1 1,9 A 12,9 1,5 0,97 SEE DETAIL A 18,4±0,3 2 +0,05 -0 0,75±0,15 1,27 2,54 7 0,9±0,25 6 2,54 Card stop Top card level recommended 2,54 1,1±0,05 18,75 8x 0,3 11,55 A 0,7 XXXX (1,97) 8 3 7,5 Pick and place area ø 3.3 4 0,7 A 4,4 7,65 45˚0' A 11,8 7,8 2x 0,3 0,6 1,5 x 45˚ 0,75 15,45 (2,16) R0,7 A +0,10 -0,05 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) 24,15 C3 (18,75) A C7 C8 0,2 +0,1 0 C2 1,3 8x C1 C6 1,27 C5 11,75 3x 2,54 8,35 +0,1 0 C4 (24) 3,6 x 45˚ SW (26,9) 11,4 +0,1 0 SW 1,1 2x 7,95 +0,1 0 R0, 2m in A 3 18,95 16,4 15,8 4 +0,1 0 1,7 R0, 5 m 10x ax 8x +0,1 0 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 19 Full Size 40˚0' 0,5 0,75 +0,10 -0,04 0,25 ± 0,05 x45˚ A-A Mated condition 3,81 3,81 CCM04 MK4 Series CCM04-5468 LFT 40˚ DETAIL A SCALE 10 3,5±0,08 0,25 ± 0,05 x45˚ 2 0,85 15,15±0,3 9,5±0,3 15,6 A 12,9 0,8 0 -0,1 11,15 0,07 Full Size 3,81 0,5 3,81 1,1±0,15 Mated condition SEE DETAIL A B 0 -0,1 0,75±0.15 6 1,1±0,05 18,75 2,54 7,5 Top card level recommended 0,3 0,9±0,25 1,27 2,54 7 2,54 A Card stop 8x 11,55 0,7 XXXX (1,97) 8 2x (2,16) 0,3 1,5 x 45˚ 4 A 0,7 45˚ 4,4 2x 11,8 7,8 0,75 15,45 +0,10 -0,15 0,6 Pick and place area ø 3,3 A 7,65 R0, 7 3 A 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) 13,2 1,3 Stand-off area 6x Contact foot area 0,8 x 0,7 9,2 1,3 C5 (11,55) C1 1,3 (18,75) 1,27 C6 C3 C8 (24) 2x 2,54 C7 8x 0,2 2,54 C2 0,2 2,54 1,7 3 1,1 C4 4 SW SW Pad 3,81 Plastic outline Contact location according to ISO/IEC 7816-2 3,81 2,79 Switch contact foot area 0,85 x 0,7 15,15 9,5 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 20 CCM04 MK4 Series (0,75) 0,15 +0,03 -0,07 +0,03 0 2 11,15 1,5 0,97 SEE DETAIL A 18,4±0,3 1,4 8,5±0,3 15,6 (18,4) B 0 -0,1 2 ±0.05 0,75±0,15 A 12,9 2 Full Size 40˚ DETAIL A Scale 10 1,1±0,15 Mated condition 3,81 3,81 0,5 0,75 +0,10 -0,04 0,25 ± 0,05 x45˚ CCM04-5454 LFT 1,27 2,54 0,7 XXXX (1,97) 8 6 Top card level recommended 2,54 7 0,9±0,25 2,54 Card stop 18,75 8x 0,3 11,55 A 1,1±0,05 3 7,5 R0,7 A 4 A 0,7 A 4,4 7,65 45˚ 0,3 (2,16) 0,6 1,5 x 45˚ 2x 11,8 7,8 0,75 15,45 +0,10 -0,05 0,75±0,05 0,8 1,1 2x RECOMMENDED PC BOARD LAYOUT (Component side) Scale 2,5 2.8±0.05 x 45˚ 12.6±0.05 SW C6 C2 C5 C1 13.2±0.05 0,2 A R0,5 m ax 8x Pick and place area ø 8 max (18,75) C3 1,3 8x C4 C7 1,27 C8 A 11,75 +0,1 0 3 3x 2,54 18,35 +0,1 0 in 7,35 4 +0,1 0 SW R1 m 1,7 10x 16,4 8,35 22,9 (24) +0,1 0 (26,9) Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 21 CCM04 MK4 Series Mated condition (0,75) 3,05 40˚ 1,1±0,15 3,81 2,93 3,81 0,5 0,75 +0,10 -0,04 0,25 ± 0,05 x45˚ CCM04-5455 LFT 2 0,97 0,15 +0,03 -0,07 +0,03 0 Full Size 2 SEE DETAIL A 18,4±0,3 11,15 (18,4) 8,5±0,3 15,6 12,9 A 1,4 1,5 B 0 -0,1 2 ±0.05 0,75±0,15 1,27 2,54 0,7 XXXX (1,97) 8 6 Top card level recommended 7 0,9±0,25 2,54 Card stop 18,75 8x 0,3 2,54 11,55 A 1,1±0.05 3 7,5 R0,7 A 4 A 0,7 A 4,4 7,65 45˚ 0,3 (2,16) 0,6 1,5 x 45˚ 2x 11,8 7,8 0,75 15,45 +0,10 -0,05 0,75±0,05 0,8 R1 m SW 3 C6 C2 C5 C1 R0,5 m ax 8x (24) 13.2±0.05 0,2 A Pick and place area ø 8 max (18,75) C3 A C4 C7 1,27 C8 1,3 8x 11,75 +0,1 0 3x 2,54 18,35 +0,1 0 in 7,35 4 SW +0,1 0 1,1 2x RECOMMENDED PC BOARD LAYOUT (Component side) Scale 2,5 2.8±0.05 x 45˚ 12.6±0.05 1,7 10x 16,4 (26,9) 8,35 22,9 +0,1 0 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 22