FAB0907016 Features ►6U * 6TE * 160 mm ►Vin : 103,5-120,6Vac / 400Hz (phase neutral) ►Output : 144Vdc / isolated ►Pout max : 1000W ►Fan cooled 4m/s min. (External) Applications 3 phase powerfactor front end supply with isolated output for aeronautic. INPUT Voltage range : 103,5-120,5Vac (phase neutral) Frequency : 400Hz Powerfactor correction : > 0,9 Input protection : Transient and surges AIR2021E, DO160E, MIL-STD 461E, STANAG 1008 Overcurrent: By Fuse OUTPUT Voltage : Power : 144Vdc / 7,2A 1000W with fan cooled 4m/s. 75W at 70°C , convection cooled Current limit, short circuit : protected on output Overvoltage : protected on output FAB0907016 Rev. 00 Typ. Max. Conditions Line regulation +/- 0,16 % +/-1 % Low line to high line ; full load Load regulation +/- 5 % 0 % to full load Page 1 of 3 www.powersystemtechnology.com Signal PFC OK : Output monitor : open collector : closed if Vout > 110V open otherwise Environmental Storage temperature : Operating temperature : -40°C to +85°C -40°C to +55°C ambiant external air forced 4m/s min. EMI / EMC MIL-STD-461E DO160E with external filter Isolation Input to Chassis : 2120 Vdc or 1500Vrms without Y capacitor Input to Output : 1500 Vdc Output to Chassis : 500 Vdc PFC OK to chassis : 2120 Vdc FAB0907016 Rev. 00 Page 2 of 3 www.powersystemtechnology.com Mechanical Weight : 1,24Kg J14 DIN41612 H15 : 05H15MGWVZ32/K1 J13 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 J13 DIN41612 H15 : 05H15MGWVZ32/K1 J14 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 FAB0907016 Rev. 00 DESCRIPTION Ground NC NC Phase A Phase A Phase A Phase B Phase B Phase B Phase C Phase C Phase C NC NC Ground DESCRIPTION Ground NC NC PFC_OK+ PFC_OKNC +144V +144V +144V 0V 0V 0V NC NC Ground Page 3 of 3 www.powersystemtechnology.com