BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • MELF Schottky rectifier • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C DO-213AB • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 20 V to 60 V IFSM 30 A VF 0.50 V, 0.70 V TJ max. 125 °C, 150 °C MECHANICAL DATA Case: DO-213AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 Denotes Schottky devices: 1st band is orange Polarity color bands (2nd band) voltage type SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 Gray Red Orange Yellow Green UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V Maximum RMS voltage VRMS 14 21 28 35 42 V Maximum DC blocking voltage VDC 20 30 40 50 60 V Maximum average forward rectified current (Fig. 1) IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Voltage rate of change (rated VR) dV/dt 10 000 V/µs Operating junction temperature range Storage temperature range Document Number: 88548 Revision: 29-Apr-08 TJ TSTG - 55 to + 125 - 55 to + 150 - 55 to + 150 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] °C °C www.vishay.com 47 BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) SYMBOL 1.0 A Maximum reverse current at rated DC blocking voltage (1) SGL41-20 SGL41-30 VF SGL41-40 SGL41-50 0.50 SGL41-60 0.70 UNIT V 0.5 TA = 25 °C TA = 100 °C Typical junction capacitance BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 IR 4.0 V, 1.0 MHz CJ 10 5.0 110 80 mA pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 SGL41-30 SGL41-40 RθJA RθJT Maximum thermal resistance (1) SGL41-50 SGL41-60 75 30 UNIT °C/W Note: (1) Thermal resistance junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.137 96 1500 7" diameter plastic tape and reel 13" diameter plastic tape and reel SGL41-40-E3/96 SGL41-40-E3/97 0.137 97 5000 BYM13-40-E3/96 0.137 96 1500 7" diameter plastic tape and reel BYM13-40-E3/97 0.137 97 5000 13" diameter plastic tape and reel SGL41-40HE3/96 (1) 0.137 96 1500 7" diameter plastic tape and reel SGL41-40HE3/97 (1) 0.137 97 5000 13" diameter plastic tape and reel BYM13-40HE3/96 (1) 0.137 96 1500 7" diameter plastic tape and reel BYM13-40HE3/97 (1) 0.137 97 5000 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 Average Forward Current (A) Resistive or Inductive Load P.C.B. Mounted on 0.24 x 0.24" (6.0 x 6.0 mm) Copper Land Areas 0.75 SGL41-20 to SGL41-40 0.50 SGL41-50 and SGL41-60 0.25 Peak Forward Surge Current (A) 1.0 At Rated Td 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 0 25 50 75 100 125 150 175 1 100 10 Terminal Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 48 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88548 Revision: 29-Apr-08 BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 125 °C 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 150 °C Pulse Width = 300 µs 1 % Duty Cycle 1 TJ = 25 °C 0.1 100 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 0.01 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 1 100 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Current (mA) 100 SGL41-20 to SGL41-40 SGL41-50 and SGL41-60 10 TJ = 125 °C 1 0.1 TJ = 75 °C 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB Solderable Ends D2 = 1st Band Mounting Pad Layout 0 D1 +- 0.008 (0.20) 0.138 (3.5) MAX. D2 D1 = 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.018 (0.46) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 (3.0) MIN. 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) Document Number: 88548 Revision: 29-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 49 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1