VER : E_3 update : 2015.12.09 AC-DC Power Module ASC SERIES 30 Watts KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output and Low Ripple and Low Noise Isolation Class II -40OC Starting CE, CB, UL Approval 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) Max Output Wattage (W) Voltage Frequency (Hz) Input Output ASC-3.3S ASC-5S ASC-12S ASC-15S ASC-24S 20W 30W 30W 30W 30W 90-264 VAC or 120-370 VDC 47-440 Hz Current (Full load) 520 mA max. (115 VAC) / 320 mA max. (230 VAC) Inrush Current (<2ms) 23 A max. (115 VAC) / 46 A max. (230 VAC) Leakage Current 0.75 mA max. External Fuse (recommend) 1.5 A slow blow type Voltage (V.DC.) 3.3V Voltage Accuracy ±2% 5V 12V 15V 24V 6000 2500 2000 1250 Current (mA) max 6000 Line Regulation (LL-HL) (typ.) ±1% Load Regulation (8-100%) (typ.) ±1% Minimum Load 5% 8% 2% 2% 2% Maximum Capacitive Load (at 230VAC) 80000 uF 70000 uF 14000 uF 11000 uF 5900 uF Ripple <0.2% Vout +40mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 75% 82% 82% 82% Hold-up Time 15 ms min. 79% Over Power Protection Hiccup technique, auto-recovery Protection Over Voltage Protection Zener diode clamp Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Isolation Input-Output (V.AC) 3000 V Operating Temperature -40°C…+70°C (with derating) Environment Physical Safety EMC Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >200,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 3.52 x 2.52 x 0.98 Inches ( 89.5 x 64.1 x 25.0 mm ) Tolerance 0.5 mm Case Material Plastic resin (flammability to UL 94V-0) Weight 212 g Cooling Method Free air convection Agency Approvals UL/cUL, CE, CB EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 55024 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : E_3 update : 2015.12.09 AC-DC Power Module ASC SERIES 30 Watts ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Dual、Triple Output ) Max Output Wattage (W) Voltage Input Output Protection Isolation Environment Physical Safety EMC ASC-5D ASC-12D ASC-15D ASC-5S12S ASC-5S12D ASC-5S15D 30W 30W 30W 30W 30W 30W 5/±12 5/±15 3000/±630 3000/±500 90-264 VAC or 120-370 VDC Frequency (Hz) 47-440 Hz Current (Full load) 520 mA max. (115 VAC) / 320 mA max. (230 VAC) Inrush Current (<2ms) 23 A max. (115 VAC) / 46 A max. (230 VAC) Leakage Current 0.75 mA max. External Fuse (recommend) 1.5 A slow blow type Voltage (V.DC.) ±5V Voltage Accuracy ±5% Current (mA) max ±3000 Line Regulation (LL-HL) (typ.) ±1% Load Regulation (20-100%) (typ.) ±3% Minimum Load Maximum Capacitive Load (at 230VAC) Ripple 2% <0.2% Vout +40mV max (Vp-p) Noise <0.5% Vout +50mV max (Vp-p) Efficiency 79% Hold-up Time 15 ms min. Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp ±50000 uF ±12V ±15V ±2% / ±5% ±1250 ±1000 3000/1250 ±1% / ±5% ±2% / ±6% 3% ±14000 uF 82% 1% 20% 20% 20% ±10000 uF 13200 / 6400 uF 15000 / ±5400 uF 10000 / ±3200 uF 80% 79% 79% 78% Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 3000 V Operating Temperature -40°C…+70°C (with derating) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >200,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 3.52 x 2.52 x 0.98 Inches Case Material Plastic resin (flammability to UL 94V-0) Weight 212 g Cooling Method Free air convection Agency Approvals UL/cUL, CE, CB EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 55024 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 5/12 ( 89.5 x 64.1 x 25.0 mm ) Tolerance 0.5 mm -2- VER : E_3 update : 2015.12.09 AC-DC Power Module ASC SERIES 30 Watts NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. It's necessary Varistor 14S471K at L / N input side in parallel. 3. It's necessary 10R / 15φ thermistor at L input side in series connection. 4. The triple output required a minimum 20% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices; however they may not meet all listed specification. 5. Load regulation for triple output: Main output (V1): 20% to 100% with 20% to 100% balanced on auxiliaries. Auxiliary outputs (V2 and V3): 20% to 100% balanced on all outputs. 6. Cross regulation for triple output: Main output 100% load, auxiliary 100%, other auxiliary 25% to 100%. Auxiliary outputs (V2 and V3): Main output 100% load, auxiliary 100%, other auxiliary 25% to 100% or main output 25%, auxiliary 25%, other auxiliary 25% to 100%. 7. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw MECHANICAL DIMENSION ( Top View ) PIN# Single Dual 5S/12S Triple 1 AC IN (N) AC IN (N) AC IN (N) AC IN (N) 2 AC IN (L) AC IN (L) AC IN (L) AC IN (L) 3 +DC OUT +DC OUT +12V OUT +DC OUT 4 NO PIN NO PIN +5V OUT +5V OUT 5 -DC OUT COMMON +12V RTN COMMON 6 NO PIN NO PIN +5 VRTN +5V RTN 7 NOCONNECT -DC OUT NO PIN -DC OUT DERATING http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3- VER : E_3 update : 2015.12.09 AC-DC Power Module ASC SERIES 30 Watts BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -4-