CDE CD4FA112J03 Ultra-high-frequency capacitor for catv and rf applications 0.1â ³ lead spacing Datasheet

Type CD4 High-Frequency, Mica Capacitors
Ultra-High-Frequency Capacitor for CATV and RF Applications 0.1″ Lead Spacing
Nearly the textbook ideal capacitor for high-frequency
applications, Type CD4 is rock stable over its full temperature and voltage range. Higher self-resonant frequency
and lower equivalent series inductance makes CD4 even
better than CD17 and CD18 for high-frequency applications. 0.1” lead spacing means CD4 can replace ceramic
capacitors on printed circuit boards.
Highlights
•
•
•
•
•
•
•
•
Higher self-resonant frequency and lower equivalent series inductance than CD17 and CD18
Low impedance to beyond 1 GHz
Replaces other 0.1” lead-spacing capacitors
Cool operation—Typical Qs > 2000
Shockproof and delamination free
Near zero capacitance change with frequency and temperature
100,000 V/µs dV/dt capability minimum
Zero capacitance change with voltage
Specifications
Voltage Range: 100 Vdc to 500 Vdc
Capacitance Range: 1 pF to 1,500 pF
Capacitance Tolerance: ±½ pF (D), ±1 pF (C),±1⁄2% (E)±1% (F),±1% (F),±2% (G), ±5% (J)
Ratings Temperature Range: –55 ºC to +125 ºC
For RoHS compliant add the letter F at the end of the part number.
Catalog
(pF) Part Number
L
In (mm)
910
1000
1100
1200
1500
CD4FA911J03
CD4FA102J03
CD4FA112J03
CD4FA122J03
CD4FA152J03
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
560
620
680
750
820
CD4FC561J03
CD4FC621J03
CD4FC681J03
CD4FC751J03
CD4FC821J03
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
1 CD4CD010D03
2 CD4CD020D03
3 CD4CD030D03
4 CD4CD040D03
5 CD4CD050D03
6 CD4CD060D03
7 CD4CD070D03
8 CD4CD080D03
10 CD4CD100J03
12 CD4CD120J03
15 CD4CD150J03
18 CD4CD180J03
20 CD4ED200J03
22 CD4ED220J03
24 CD4ED240J03
27 CD4ED270J03
30 CD4ED300J03
33 CD4ED330J03
36 CD4ED360J03
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
H
In (mm)
100 Vdc
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
300 Vdc
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
500 Vdc
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
T
In (mm)
S
In (mm)
d
In (mm)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.170 (4.3)
.180 (4.6)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
(pF)
39
43
47
50
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
250
270
300
330
360
390
430
470
500
510
Catalog
Part Number
CD4ED390J03
CD4ED430J03
CD4ED470J03
CD4ED500J03
CD4ED510J03
CD4ED560J03
CD4ED620J03
CD4ED680J03
CD4ED750J03
CD4ED820J03
CD4FD910J03
CD4FD101J03
CD4FD111J03
CD4FD121J03
CD4FD131J03
CD4FD151J03
CD4FD161J03
CD4FD181J03
CD4FD201J03
CD4FD221J03
CD4FD241J03
CD4FD251J03
CD4FD271J03
CD4FD301J03
CD4FD331J03
CD4FD361J03
CD4FD391J03
CD4FD431J03
CD4FD471J03
CD4FD501J03
CD4FD511J03
L
In (mm)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.290 (7.4)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
.340 (8.6)
H
In (mm)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.6)
.220 (5.8)
.220 (5.8)
.220 (5.8)
.240 (6.1)
.240 (6.1)
.240 (6.1)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
.310 (7.9)
T
In (mm)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.110 (2.8)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
.160 (4.1)
S
In (mm)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
.100 (2.5)
d
In (mm)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
.020 (.5)
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com
Type CD4 High-Frequency, Mica Capacitors
Typical Performance Curves
Insertion Loss
Over the frequency range of 100 MHz to 1 GHz
the insertion loss in a balanced 50 Ω or 75 Ω system is flat ±0.2 dB. A typical test setup is below.
Insertion Loss vs. Frequency for
CD17FC621JO3, 75 Ω System
Choosing CD4, CD16, CDV16, CD18 or CDV18
While insertion loss is flat within ±.2dB through 1 GHz,
you may be able to avoid the small notch by changing
the capacitor type to fit your capacitance. See table at
right.
TYPE
Flat to Above 1 GHz
CD17
470 pF max
CD4
620 pF max
CD16
870 pF
CDV16
870 pF
CD18
660 pF max
CDV18
1000 pF max
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com
Type CD4 High-Frequency, Mica Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com
Similar pages