Round Yellow Through-hole LED Lamp (5 mm) OVLFY3C7 x x x High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens Yellow (589 nm) Product Photo Here The OVLFY3C7 is a high-intensity AlInGaP LED mounted in a clear plastic T-1¾ package. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. This LED provides a well-defined and even emission pattern. Applications x Traffic and pedestrian signals x Signage and architectural lighting x Backlighting x Automotive RoHS Part Number Material Emitted Color Intensity Typ. (mcd) Lens Color OVLFY3C7 AlInGaP Yellow 5700 Water Clear Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 10/05 Page 1 of 4 Round Yellow Through-hole LED (5 mm) OVLFY3C7 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +85° C Reverse Voltage 5V Continuous Forward Current 2 30 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 78 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb) 1 260° C Current Linearity vs. Ambient Temperature -0.5 mA/° C LED Junction Temperature 125° C Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Design of Heat Dissipation should be considered. Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP Iv Luminous Intensity 3115 VF Forward Voltage ---- IR MAX UNITS CONDITIONS 5700 ---- mcd IF = 20 mA 2.2 2.6 V IF = 20 mA Reverse Current ---- ---- 10 µA VR = 5 V P Peak Wavelength ---- 593 ---- nm IF = 20 mA D Dominant Wavelength ---- 589 ---- nm IF = 20 mA Spectra Half Width 50% Power Angle ------- 25 30 ------- nm deg IF = 20 mA IF = 20 mA 2 ½ Standard Bins (IF = 20mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLFY3C7 may be filled with any or all bins contained as below. 6105–8550 X 4360–6105 W 3115–4360 V 585 589 592 595 Dominant Wavelength (nm) Luminous intensity is at V bin or above. Forward Voltage (VF) Rank G H J 6 Voltage 1.8–2.0 2.0–2.2 2.2–2.4 2.4–2.6 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM.. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Round Yellow Through-hole LED (5 mm) OVLFY3C7 Typical Electro-Optical Characteristics Curves mA % V mA Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current V mA A °C Reverse Current vs Reverse Voltage % Forward Current vs Ambient Temperature % nm Relative Luminous Intensity vs Wavelength °C Relative Luminous Intensity vs Ambient Temperature Beam Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 10/05 Page 3 of 4 Round Yellow Through-hole LED (5mm) OVLFY3C7 Packing Information: Available in bulk or reel Bulk: 500 pcs/bag 13-inch reel: 1000 pcs/reel Carrier Tape Dimensions: Loaded quantity 1000 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com