EM EM6540 Mask rom Datasheet

EM MICROELECTRONIC - MARIN SA
EM65XX
EM65XX Datasheet
MFP versions of EM66XX
(Mask Rom)
EM Microelectronic-Marin SA
Tel +41 32 755 51 11
Fax +41 32 755 54 03
http://www.emmicroelectronic.com
Copyright © 2005, EM Microelectronic-Marin SA
1
www.emmicroelectronic.com
EM65XX
Table of Contents
1. GENERAL ........................................................................................................................ 3
ORDERING INFORMATION .................................................................................................. 3
2. EM6503 ............................................................................................................................ 4
3. EM6504 ............................................................................................................................ 7
4. EM6505 .......................................................................................................................... 11
5. EM6517 .......................................................................................................................... 15
6. EM6520 .......................................................................................................................... 16
7. EM6521 .......................................................................................................................... 17
8. EM6522 .......................................................................................................................... 18
9. EM6540 .......................................................................................................................... 19
10.
PACKAGE DIMENSIONS ........................................................................................... 23
11.
ORDERING INFORMATION ....................................................................................... 28
Copyright © 2005, EM Microelectronic-Marin SA
2
www.emmicroelectronic.com
EM65XX
1.
General
The EM65xx is the Multiple Field Programmable Version of the corresponding EM66xx 4 bit
Microcontroller
The program ROM is replaced by non volatile memory, which can be programmed up to 100 times.
Functionally, the two types are equal, except the metal options which are defined in the following
pages.
Electrically, the MFP ‘s work above 2.0V and need more current, see the tables in the following
description.
The programming is done with the EM MFP programmer, either by putting the device onto the
programmer or connecting it with the connector at the back to your board.
Qin
EM MFP
Programmer
Qout
Test
Vreg
Vdd
EM65xx
Vss
Your
PCB
Handling Procedures
This devices have built-in protection against high static voltages or electric fields; however, anti-static
precautions should be taken as for any other CMOS component.
Unless otherwise specified, proper operation can only occur when all terminal voltages are kept within
the supply voltage range.
Absolute maximum ratings
Min.
Max.
Units
Power supply VDD-VSS
- 0.2
+ 5.5
V
Input voltage
VSS - 0.2
VDD+0.2
V
Storage temperature
- 40
+ 125
°C
Electrostatic discharge to
MIL-STD-883C method 3015
-2000
+2000
V
Maximum soldering conditions
10s x 250°C
Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond
specified electrical characteristics may affect device reliability or cause malfunction.
Ordering Information
The MFP’s should be used for engineering purposes only. No volume production must be planned.
Copyright © 2005, EM Microelectronic-Marin SA
3
www.emmicroelectronic.com
EM65XX
2.
EM6503
Input/Output ports
All ports if selected as outputs are Push-pull outputs (driving high / low).
Inputs are not blocked when Output is selected and Outputs comes Hi-Z in Sleep mode.
Input/Output Port Options
Pull-Up
Yes / No
Pull-Down
Yes / No
0
A0
A1
A2
A3
B0
B1
B2
B3
C0
C1
C2
C3
D0
D1
D2
D3
PA0 input
PA1 input
PA2 input
PA3 input
PB0 In/Out
PB1 In/Out
PB2 In/Out
PB3 In/Out
PC0 In/Out
PC1 In/Out
PC2 In/Out
PC3 In/Out
PD0 In/Out
PD1 In/Out
PD2 In/Out
PD3 In/Out
Nch-open drain Input blocked
Yes / No
when Output
Yes / No
4
5
1
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
Output Hi-Z in
SLEEP mode
Yes / No
6
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
PortA reset
No PortA reset option is selected
NO PortA reset
combination
RA PortA RESET
0
X
PA0 & PA1 logic
AND input reset
PA0 & PA1 & PA2
logic AND input
reset
2
1
PA0 & PA1 & PA2 &
PA3 logic AND input
reset
3
Supply Voltage Level Detector
T= -10°C to 60°C
Symb.
VSVLD1
VSVLD2
VSVLD3
Parameter
SVLD voltage Level1
SVLD voltage Level2
SVLD voltage Level3
Copyright © 2005, EM Microelectronic-Marin SA
Min.
2.25
3.15
3.87
Typ.
2.5
3.5
4.3
4
Max.
2.75
3.85
4.73
Unit
V
V
V
www.emmicroelectronic.com
EM65XX
Electrical specifications
Standard Operating Conditions
Parameter
Temperature
VDD
VSS
CVreg
fq
Rqs
CL
df/f
Value
0°C...+60°C
+2.0 ...+5.0V
0 V (reference)
min. 100nF
32768 Hz
35 kOhm
8.2pF
+/- 30 ppm
Description
Vreg logic supply capacitor
nominal frequency
typical quartz serial resistor
typical quartz load capacitance
quartz frequency tolerance
DC characteristics - Power Supply Pins
VDD=3.0V, T=25°C (note4) (unless otherwise specified), Vreg not shorted to VDD
Parameter
Conditions
Symb.
ACTIVE Supply Current
ACTIVE Supply Current
(in active mode)
STANDBY Supply Current
STANDBY Supply Current
(in Halt mode)
SLEEP Supply Current
SLEEP Supply Current
(SLEEP =1)
Regulated Voltage
+25°C (note2)
(note2) (note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
0°C...+60°C
IVDDa
Min.
IVDDa
IVDDh
IVDDh
IVDDs
IVDDs
Vreg
Typ.
(note1)
9.0
Max.
15.0
Unit
µA
1.7
20.0
4.0
µA
µA
0.7
7.0
2.0
µA
µA
5.0
2.5
µA
V
1.6
VDD=5.0V, T=25°C (note4) (unless otherwise specified), Vreg not shorted to VDD
Parameter
Conditions
Symb.
ACTIVE Supply Current
ACTIVE Supply Current
(in active mode)
STANDBY Supply Current
STANDBY Supply Current
(in Halt mode)
SLEEP Supply Current
SLEEP Supply Current
(SLEEP =1)
+25°C (note2)
(note2) (note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
IVDDa
Min.
Typ.
(note1)
13.0
Max.
18.0
Unit
µA
IVDDa
IVDDh
1.8
20.0
5.0
µA
µA
IVDDh
IVDDs
0.7
10.0
2.0
µA
µA
5.0
µA
IVDDs
Note1: For current measurement typical quartz described in Operating Conditions is used.
All I/O pins without internal Pull Up/Down are pulled to VDD externally.
Note2: Test loop with successive writing and reading of two different addresses with an inverted
values (five instructions should be reserved for this measurement),
Note3: NOT tested at temperature if delivered in chip form.
Note4: Test conditions for ACTIVE and STANDBY Supply current mode are: Qin = external
square wave, from rail to rail of Vreg (regulated voltage) with 100nF capacitor on Vreg.
fQin = 33kHz.
Copyright © 2005, EM Microelectronic-Marin SA
5
www.emmicroelectronic.com
EM65XX
Today’s Versions
EM6503P02
I/O’s
VLD levels
Remarks
As defined
As defined
-
X=4606
PC3
X=3828
PC2
X=4082
PD1
X=1648
PD3
X=405
PD2
X=1026
All dimensions in Microns
PD0
X=2369
Die, pad location and size
Y=4204
Y=3991
PC1
Y=3705
NC
RESET
Y=3435
NC
PC0
Y=2731
STB/RST
Y=2477
VSS
Y=2203
OscIn
Y=1997
VddCA
Y=2719
Vbat
Y=2465
EM6503
CHIP SIZE is X = 5029 microns by Y = 4419 microns
or X = 198 mils by Y = 174 mils
heith of the die Z = 11 mils
OscOut
Y=1221
X=4633
PA0
Y=1469
PA1
Y=1205
PA2
Y=941
X=4817
TEST
X=4545
PB3
X=3432
PB2
X=2901
PB1
X=2370
PA3
X=522
X=0
X=−212
PB0
X=1839
Y=0
Y=−215
Package
SO24 package. See dimensions in section 10.
Copyright © 2005, EM Microelectronic-Marin SA
6
www.emmicroelectronic.com
EM65XX
3.
EM6504
Input / Output ports
The EM6504 - MFP version of EM6604 has no input pull-up or pull-down resistors. User has to put
an external resistor if needed in the application. In metal ROM version (EM6604) user can select
resistors described in Electrical parameters and Input/Output port mask option.
For PortC Input/Output selection there is an additional register in EM6504 (register PcOE at address
60hex) instead of metal mask in EM6604.
For PortA Rising/Falling Interrupt edge selection there is an additional register in EM6504 (register
PaIRQedge at address 63hex) instead of metal mask in EM6604.
PortC Input/Output metal options are replaced by register PcOE in EM6504 MFP version.
This register is described below.
Input / Output ports option
Clocked
Output
Clocked PullPull-Down Pull-Up
Pull-Up
Down
R=
R = 30k? R =
Pull-Down Pull-Up R = 30k? 150k?
150k?
R > 1M? R >
1M?
0
A0
A1
A2
A3
C0
C1
C2
C3
PA0 input
PA1 input
PA2 input
PA3 input
PC0 In/Out
PC1 In/Out
PC2 In/Out
PC3 In/Out
1
2
3
4
5
6
PCoe0
PCoe1
PCoe2
PCoe3
No
Input
Pull-Up
or
PullDown
7
x
x
x
x
x
x
x
x
the MFP EM6504 option selection is showed by « x » and « PCoex »
PortA interrupt edge
This metal options are replaced by register PaIRQedge in EM6504 MFP version. The register is described
below.
PortA interrupt edge option
I0
I1
I2
I3
PA0 – IRQ
PA1 – IRQ
PA2 – IRQ
PA3 – IRQ
Interrupt on Input’s rising edge
8
PA0r = 1
PA1r = 1
PA2r = 1
PA3r = 1
Interrupt on Input’s falling edge
9
PA0r = 0
PA1r = 0
PA2r = 0
PA3r = 0
the MFP EM6504 PortA interrupt edge option is selected by values in register PaIRQedge
Copyright © 2005, EM Microelectronic-Marin SA
7
www.emmicroelectronic.com
EM65XX
Watchdog metal option
The Watch-Dog timer is always active.
Watchdog metal option
Watch-Dog timer ACTIVE
x
W0 WD timer
Watch-Dog timer INACTIVE
Supply Voltage Level Detector
T= -10°C to 60°C
Symb.
VSVLD1
Parameter
SVLD voltage Level1
Min.
2.02
Typ.
2.30
Max.
2.38
Unit
V
Additional registers
In EM6504 there are two additional registers replacing metal options in EM6604.
Register
name
add add
hex dec
PaIRQedge
63
99
reset
value
b'3210
0000
PcOE
60
96
0000
write_bits
read_bits
Read/Write_bits
0: PA0r
1: PA1r
2: PA2r
3: PA3r
0: PCoe0
1: PCoe1
2: PCoe2
3: PCoe3
Remarks
Port A IRQ edge
1 = rising
0 = falling
Port C Output Enable
1 = output
0 = input
Because these two registers replace the metal option in EM6604 it is advised that they are written as
first two instructions in the main program and that they are executed only once. They should not be
changed later in the program because the metal options in EM6604 are fixed.
Electrical specifications
Standard Operating Conditions
Parameter
Temperature
VDD
VSS
CVDDCA
fq
Rqs
CL
df/f
Value
0°C...+60°C
+2.0 ...+5.0V
0 V (reference)
min. 100nF (note1)
32768 Hz
35 kOhm
8.2pF
+/- 30 ppm
Description
Vreg switched logic supply
capacitor
nominal frequency
typical quartz serial resistor
typical quartz load capacitance
quartz frequency tolerance
Note1: This capacitor maintains the Regulated Supply to the core when the core has been isolated
by the internal Supply switch during driving the high current outputs. The user should be
aware that the selection of this capacitor will dictate the time that the core can be isolated.
Copyright © 2005, EM Microelectronic-Marin SA
8
www.emmicroelectronic.com
EM65XX
DC characteristics - Power Supply Pins
VDD=3.0V, T=25°C (unless otherwise specified)
Parameter
ACTIVE Supply Current
ACTIVE Supply Current
(in active mode)
STANDBY Supply Current
STANDBY Supply Current
(in Halt mode)
RAM data retention
VDDCA regulated voltage !!
POR voltage
SVLD voltage
Conditions
+25°C (note2)
(note2 / 3 / 4)
0°C...+60°C
+25°C
(note3 / 4)
0°C...+60°C
0°C...+60°C
Symb.
IVDDa
Min.
IVDDa
IVDDh
IVDDh
Vrd
VDDCA
VPOR
VSVLD
Typ.(note5)
9.0
2
1.3
1.6
2.25
2.0
0.9
2.5
Max.
15
Unit
μA
20
4
μA
μA
7
2.6
1.40
2.8
μA
V
V
V
V
Max.
18
Unit
μA
VDD=5.0V, T=25°C (unless otherwise specified)
Parameter
ACTIVE Supply Current
ACTIVE Supply Current
(in active mode)
STANDBY Supply Current
STANDBY Supply Current
(in Halt mode)
Conditions
+25°C (note2)
(note2 / 3 / 4)
0°C...+60°C
+25°C
(note3 / 4)
0°C...+60°C
Symb.
IVDDa
IVDDa
IVDDh
IVDDh
Min.
Typ.(note5)
13
1.8
20
5
μA
μA
10
μA
Note2: test loop with successive writing and reading of two different addresses with an inverted
values (five instructions should be reserved for this measurement),
Note3: NOT tested at temperature if delivered in chip form.
Note4: Test conditions for ACTIVE and STANDBY Supply current mode are: Qin = external
square wave, from rail to rail of Vreg (regulated voltage) with 100nF capacitor on Vreg.
fQin = 33kHz.
Note5: For current measurement typical quartz described in Operating Conditions is used.
All I/O pins without internal Pull Up/Down are pulled to VDD externally.
Copyright © 2005, EM Microelectronic-Marin SA
9
www.emmicroelectronic.com
EM65XX
Todays Versions
EM6504P02
I/O’s
VLD levels
Remarks
As defined
As defined
-
X=3526
Vbat1
X=3282
PC1
X=1842
PC2
X=1238
PC3
X=634
X=27
All dimensions in Microns
PC0
X=2446
Die, pad location and size
Y=4237
Y=4030
BUZZER
Y=3686
PB3
Y=3602
Y=3442
TEST
Y=3343
VSS
Y=2938
PB2
Y=2841
Y=2681
EM6504
CHIP SIZE is X = 4953 microns by Y = 4445 microns
or X = 195 mils by Y = 175 mils
heith of the die Z = 11 mils
PB1
Y=1792
Y=1632
RESET
Y=1311
PB0
Y=1031
Y=871
QOut
Y=939
Vss
Y=290
Qin
Y=163
Y=0
Y=108
X=4764
X=4550
STB/RST
X=4068
PA2
X=3156
PA1
X=1487
PA0
X=814
VddCA
X=548
X=0
X=−210
Y=−208
PA3
X=3591
Y=0
Package
SO24 package. See dimensions in section 10.
Copyright © 2005, EM Microelectronic-Marin SA
10
www.emmicroelectronic.com
EM65XX
4.
EM6505
Input/Output ports
All ports if selected as outputs are Push-pull outputs (driving high / low).
Inputs are not blocked when Output is selected and Outputs stays active also in Sleep mode.
Input/Output Port Options
Pull-Up
Yes / No
Pull-Down
Yes / No
0
A0
A1
A2
A3
B0
B1
B2
B3
C0
C1
C2
C3
D0
D1
D2
D3
Nch-open drain Input blocked
Yes / No
when Output
Yes / No
4
5
1
PA0 input
PA1 input
PA2 input
PA3 input
PB0 In/Out
PB1 In/Out
PB2 In/Out
PB3 In/Out
PC0 In/Out
PC1 In/Out
PC2 In/Out
PC3 In/Out
PD0 In/Out
PD1 In/Out
PD2 In/Out
PD3 In/Out
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
Output Hi-Z in
SLEEP mode
Yes / No
6
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
PortA reset
No PortA RESET is selected.
NO PortA reset
combination
0
RA PortA RESET
PA0 & PA1 logic
AND input reset
PA0 & PA1 & PA2
logic AND input
reset
2
1
PA0 & PA1 & PA2 &
PA3 logic AND input
reset
3
X
Supply Voltage Level Detector
T= -10°C to 60°C
Symb.
VSVLD1
VSVLD2
VSVLD3
Parameter
SVLD voltage Level1
SVLD voltage Level2
SVLD voltage Level3
Copyright © 2005, EM Microelectronic-Marin SA
Min.
2.02
3.70
4.15
Typ.
2.30
4.00
4.50
11
Max.
2.38
4.30
4.86
Unit
V
V
V
www.emmicroelectronic.com
EM65XX
RC oscillator adjustment on the EM6505 (MFP version only)
Register
name
RC_Adj_Low
RC_Adj_High
add add
hex dec
66
67
102
103
power
up
value
b'3210
write_bits
0001
0: OscAdj[0]
1: OscAdj[1]
2: OscAdj[2]
3: OscAdj[3]
0: OscAdj[4]
1: OscAdj[5]
2: OscAdj[6]
3: OscAdj[7]
1000
read_bits
Remarks
Read/Write_bits
----
Adjustment of RC oscillator
(4 LSB)
----
Adjustment of RC oscillator
(4 MSB)
On the EM6605 (ROM version), the adjustment of the RC oscillator is done by metal option
(refer to chapter 14 of the EM6605 datasheet).
On the EM6505 (MFP version), there is no metal option to adjust the frequency range.
Adjusting the 8 bits contained in registers “RC_Adj_Low” and “RC_adj_High” sets the
frequency. The bit “OscAdj[7]” selects the frequency range: low or high frequency range
(refer to chapter 4 of the EM6605 datasheet).
The others bits as well as the external resistor on Pin 10, are used to adjust more precisely
the frequency.
The frequency has to be in the range of 30kHz to 300kHz (refer to chapter 17.7 of the EM6605
datasheet).
Electrical specifications
Standard Operating Conditions
Parameter
Temperature
VDD
VSS
Cvreg
Value
0°C...+60°C
+2.0 ...+5.0V
0 V (reference)
min. 100nF
Description
Rext
50kΩ - 400kΩ
external R to set clock frequency
regulated voltage capacitor tow.
Vss
Cvreg : This capacitor maintains the Regulated Supply to the internal logic.
DC characteristics - Power Supply Pins
For Frequency range of 30 - 300 kHz
VDD=5.0V, T=25°C, f=32kHz (note1) (unless otherwise specified) Rext ≈ 330kΩ
Parameter
Conditions
Symb.
ACTIVE Supply Current
ACTIVE Supply Current
(in active mode)
STANDBY Supply Current
STANDBY Supply Current
(in Halt mode)
SLEEP Supply Current
SLEEP Supply Current
(SLEEP =1)
Regulated Voltage
+25°C (note2)
(note2) (note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
Vreg not at VDD
IVDDa
Typ.
(note1)
30.0
IVDDa
IVDDh
IVDDh
IVDDs
Copyright © 2005, EM Microelectronic-Marin SA
Min.
IVDDs
Vreg
1.5
12
Max.
Unit
40.0
µA
17.0
50.0
20.0
µA
µA
1.0
40.0
2.0
µA
µA
2.0
5.0
2.5
µA
V
www.emmicroelectronic.com
EM65XX
VDD=5.0V, T=25°C, f=200kHz (note1) (unless otherwise specified) Rext ≈ 62kΩ
Parameter
Conditions
Symb.
Min.
ACTIVE Supply Current
ACTIVE Supply Current
(in active mode)
STANDBY Supply Current
STANDBY Supply Current
(in Halt mode)
SLEEP Supply Current
SLEEP Supply Current
(SLEEP =1)
+25°C (note2)
(note2) (note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
+25°C
(note3)
0°C...+60°C
IVDDa
Typ.
(note1)
80.0
IVDDa
IVDDh
IVDDh
IVDDs
IVDDs
Max.
Unit
100.0
µA
30.0
120.0
40.0
µA
µA
1.0
50.0
2.0
µA
µA
5.0
µA
Note1: For current measurement the corresponding resistor for targeted frequency ±20% is
selected; Rext : external resistor between the RCin and Vss pins.
All I/O pins without internal Pull Up/Down are pulled to VDD externally.
Note2: Test loop with successive writing and reading of two different addresses with an inverted
values (five instructions should be reserved for this measurement),
Note3: NOT tested at temperature if delivered in chip form.
Copyright © 2005, EM Microelectronic-Marin SA
13
www.emmicroelectronic.com
EM65XX
Today’s Versions
EM6505P02
I/O’s
VLD levels
Remarks
As defined
As defined
-
PC3
X=3828
PC2
X=4082
PD1
X=1648
PD3
X=405
PD2
X=1026
All dimensions in Microns
PD0
X=2369
Die, pad location and size
Y=4211
Y=4005
PC1
Y=3708
RESET
Y=3439
PC0
Y=2637
STB/RST
Y=2383
VSS
Y=2109
RCout
Y=1890
VddCA
Y=2723
Vbat
Y=2469
EM6505
CHIP SIZE is X = 5003 microns by Y = 4419 microns
or X = 197 mils by Y = 174 mils
heith of the die Z = 11 mils
RCin
Y=1253
X=4589
PA0
Y=1473
PA1
Y=1209
PA2
Y=945
X=4795
TEST
X=4545
PB3
X=3432
PB2
X=2901
PB1
X=2370
PA3
X=522
X=0
X=−208
PB0
X=1839
Y=0
Y=−208
Package
SO24 package. See dimensions in section 10.
Copyright © 2005, EM Microelectronic-Marin SA
14
www.emmicroelectronic.com
EM65XX
5.
EM6517
A new complete specification exists on the EM6517. Please refer to this document on our web site.
(http://www.emmarin.com/)
For more information or questions please contact EM headquarters or your local EM office.
Copyright © 2005, EM Microelectronic-Marin SA
15
www.emmicroelectronic.com
EM65XX
6.
EM6520
A new complete specification exists on the EM6520. Please refer to this document on our web site.
(http://www.emmarin.com/)
For more information or questions please contact EM headquarters or your local EM office.
Copyright © 2005, EM Microelectronic-Marin SA
16
www.emmicroelectronic.com
EM65XX
7.
EM6521
A new complete specification exists on the EM6521. Please refer to this document on our web site.
(http://www.emmarin.com/)
For more information or questions please contact EM headquarters or your local EM office.
Copyright © 2005, EM Microelectronic-Marin SA
17
www.emmicroelectronic.com
EM65XX
8.
EM6522
A new complete specification exists on the EM6522. Please refer to this document on our web site.
(http://www.emmarin.com/)
For more information or questions please contact EM headquarters or your local EM office.
Copyright © 2005, EM Microelectronic-Marin SA
18
www.emmicroelectronic.com
EM65XX
9.
EM6540
Standard Operating Conditions
Parameter
Temperature
VDD
VSS
CVreg (note 1)
fq
MIN
0
2.2
2.5
0.22
TYP
25
3.6
3.6
0
1
600
MAX
60
5.5
5.5
Unit
°C
V
V
V
μF
kHz
Description
fq max 620 kHz
fq max 680 kHz
Reference terminal
regulated voltage capacitor
nominal frequency
DC characteristics - Power Supply Pins
VDD=3V, T=25°C (unless otherwise specified)
Parameter
Conditions
Symb.
ACTIVE Supply Current
25°C
IVDDa
ACTIVE Supply Current
(in active mode)
STANDBY Supply Current
(in Halt mode)
SLEEP Supply Current
(SLEEP =1)
POR voltage
(note2) (note3)
0°C...+60°C
(note3)
0°C...+60°C
(note3)
0°C...+60°C
Min.
Typ.
(note1)
210
Max.
210
250
10
15
0.4
1
μA
μA
IVDDa
μA
IVDDh
IVDDs
VPOR
RAM data retention
Vrd
Regulated Voltage
Vreg
Unit
1.5
1.5
μA
V
V
1.85
V
Note1: Measured at typical freq. of 600kHz, no load.
Note2: Test loop with successive writing and reading of two different addresses with an inverted
values (five instructions should be reserved for this measurement),
Note3: NOT tested at temperature if delivered in chip form.
Metal Options
Functionally the EM6640 and the EM6540 are the same except the metal options of the EM6540
which are set in their default state.
Copyright © 2005, EM Microelectronic-Marin SA
19
www.emmicroelectronic.com
EM65XX
Input/Output Port Options
A0
A1
A2
A3
B0
B1
B2
B3
C0
C1
C2
C3
PA0 input
PA1 input
PA2 input
PA3 input
PB0 In/Out
PB1 In/Out
PB2 In/Out
PB3 In/Out
PC0 In/Out
PC1 In/Out
PC2 In/Out
PC3 In/Out
Pull-Up
controlled by software
0
none
none
none
none
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
Pull-Down
controlled by software
1
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
100kΩ
Digital WatchDog
YES
level of SWB data
VDD
Digital Watchdog Option
MDigWD
SWBdataLevel Option
MSWBdataLevel
Supply Voltage Level Detector
T= -10°C to 60°C
Symb.
VSVLD1
VSVLD2
Parameter
SVLD voltage Level1
SVLD voltage Level2
Min.
2.02
2.30
Typ.
2.20
2.50
Max.
2.37
2.70
Unit
V
V
Today’s Versions
EM6540P04
I/O’s
VLD levels
Remarks
As defined
As defined
-
Copyright © 2005, EM Microelectronic-Marin SA
20
www.emmicroelectronic.com
EM65XX
Die, pad location and size
Package
SO18 package. See dimensions in section 10.
Copyright © 2005, EM Microelectronic-Marin SA
21
www.emmicroelectronic.com
EM65XX
Pin out for the EM6540 (MFP of the EM6640)
Package: SO18
VReg
1
18
PSCK
Test
2
17
PSDIO
PA0
3
16
VSS
PA1
4
15
VBat
PA2
5
14
PC3
PA3
6
13
PC2
PB0
7
12
PC1
PB1
8
11
PC0
PB2
9
10
PB3
E
M
6
5
4
0
MFP programming connection for field programming
QOut
QIn
VSS
VBat
18
17
16
15
14 13 12
MFP
programer
11
10
8
9
EM6540
1
2
3
4
5
6
7
Test
VReg
Copyright © 2005, EM Microelectronic-Marin SA
MFP
programer
22
www.emmicroelectronic.com
EM65XX
10. Package Dimensions
All MFPs are available in chip form on special request.
Figure 1. SOP 18 Pin Package
SOP-18(1.27mm pitch, 300mils body width)
Figure 2. SOP 24 Pin Package
SOP-24(1.27mm pitch, 300mils body width)
Copyright © 2005, EM Microelectronic-Marin SA
23
www.emmicroelectronic.com
EM65XX
Figure 3. SOP 28 Pin Package
SOP-28(1.27mm pitch, 300mils body width)
Copyright © 2005, EM Microelectronic-Marin SA
24
www.emmicroelectronic.com
EM65XX
Figure 4. TQF 44 Pin Package
TOP VIEW
D
ODD LEAD SIDES
EVEN LEAD SIDES
e
b
D1
DETAIL "A"
e
SEE DETAIL "A"
S
Y
M
B
O
L
A
TQFP44
ALL DIMENSIONS IN MILLIMETERS
MIN.
TYP.
SEE DETAIL "B"
MAX.
1.20
A
A1
0.05
A2
0.95
0.15
1.00
D
12.00 BSC.
D1
10.00 BSC.
1.05
DETAIL "B"
0° MIN.
L
0.08/0.20 R.
A2
0.08
R. MIN.
0.20 MIN.
0.60
0.75
44
0.80 BSC
e
b
A1
0.45
N
0.30
0.37
0.45
0-7°
L
1.00 REF.
Copyright © 2005, EM Microelectronic-Marin SA
1.00/0.10 MM FORM, 1.00 MM THICK
PACKAGE OUTLINE, TQFP, 10X10 MM BODY,
25
www.emmicroelectronic.com
EM65XX
Figure 5. TQF 52 Pin Package
TOP VIEW
D
ODD LEAD SIDES
EVEN LEAD SIDES
e
b
D1
DETAIL "A"
e
SEE DETAIL "A"
S
Y
M
B
O
L
A
TQFP52
ALL DIMENSIONS IN MILLIMETERS
MIN.
TYP.
1.20
A
SEE DETAIL "B"
MAX.
A1
0.05
A2
0.95
0.15
1.00
D
12.00 BSC.
D1
10.00 BSC.
1.05
DETAIL "B"
0° MIN.
L
0.08/0.20 R.
A2
0.08
R. MIN.
0.20 MIN.
0.60
0.75
52
0.65 BSC
e
b
A1
0.45
N
0.22
0.32
0.38
0-7°
L
1.00 REF.
Copyright © 2005, EM Microelectronic-Marin SA
1.00/0.10 MM FORM, 1.00 MM THICK
PACKAGE OUTLINE, TQFP, 10X10 MM BODY,
26
www.emmicroelectronic.com
EM65XX
Figure 6. TQF 64 Pin Package
TOP VIEW
D
ODD LEAD SIDES
EVEN LEAD SIDES
e
b
D1
DETAIL "A"
e
SEE DETAIL "A"
S
Y
M
B
O
L
A
TQFP64
ALL DIMENSIONS IN MILLIMETERS
MIN.
TYP.
1.20
A
SEE DETAIL "B"
MAX.
A1
0.05
A2
0.95
0.15
1.00
D
12.00 BSC.
D1
10.00 BSC.
1.05
DETAIL "B"
0° MIN.
L
0.08/0.20 R.
A2
0.08
R. MIN.
0.20 MIN.
0.60
0.75
64
0.50 BSC
e
b
A1
0.45
N
0.17
0.22
0.23
0-7°
L
1.00 REF.
1.00/0.10 MM FORM, 1.00 MM THICK
PACKAGE OUTLINE, TQFP, 10X10 MM BODY,
For more information or questions please contact EM headquarters or your local EM office.
Copyright © 2005, EM Microelectronic-Marin SA
27
www.emmicroelectronic.com
EM65XX
11.
Ordering Information
Ordering Part Number
Part Number
Package/Die Form
EM6503%%%SO24A
EM6503%%%WP11
EM6504%%%SO24A
EM6504%%%WP11
EM6505%%%SO24A
EM6505%%%WP11
EM6517%%%SO28A
EM6517%%%WP11
EM6520%%%TQ44D
EM6520%%%WP11
EM6521%%%TQ52D
EM6521%%%WP11
EM6522%%%TQ64D
EM6522%%%WP11
EM6540%%%SO18A
EM6540%%%WP11
24 pin SOIC
Die in waffle pack
24 pin SOIC
Die in waffle pack
24 pin SOIC
Die in waffle pack
28 pin SOIC
Die in waffle pack
TQFP 44 pin
Die in waffle pack
TQFP 52 pin
Die in waffle pack
TQFP 64 pin
Die in waffle pack
18 pin SOIC
Die in waffle pack
Delivery Form/
Thickness
Stick
11 mils
Stick
11 mils
Stick
11 mils
Stick
11 mils
Trays (Plate)
11 mils
Trays (Plate)
11 mils
Trays (Plate)
11 mils
Stick
11 mils
Please make sure to give the complete Part Number when ordering, including the 3-digit version. The version is made of 3
digits %%%: the first one is a letter and the last two are numbers, e.g. P04 , P07, P12, etc.
For other delivery forms, please contact EM Microelectronic-Marin S.A.
EM Microelectronic-Marin SA (EM) makes no warranty for the use of its products, other than those expressly contained in
the Company's standard warranty which is detailed in EM's General Terms of Sale located on the Company's web site.
EM assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or
specifications detailed herein at any time without notice, and does not make any commitment to update the information
contained herein. No licenses to patents or other intellectual property of EM are granted in connection with the sale of EM
products, expressly or by implications. EM's products are not authorized for use as components in life support devices or
systems.
© EM Microelectronic-Marin SA, 10/05, Rev. I
Copyright © 2005, EM Microelectronic-Marin SA
28
www.emmicroelectronic.com