4 ITEM 3 CONNECTOR PART NO. 2 IPI CHECK DESCRIPTION 1 See Table 1 DS CONNECTOR 2 UL1061, 28 AWG WHITE 1 EOR CHECK Applicable Tooling BCD TABLE 1 ITEM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D NUMBER OF CIRCUITS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CONNECTOR PART NO. 02DS-8E 03DS-8E 04DS-8E 05DS-8E 06DS-8E 07DS-8E 08DS-8E 09DS-8E 10DS-8E 11DS-8E 12DS-8E 13DS-8E 14DS-8E 15DS-8E ASSEMBLY PART NUMBER A02DS02DS28W51B A03DS03DS28W51B A04DS04DS28W51B A05DS05DS28W51B A06DS06DS28W51B A07DS07DS28W51B A08DS08DS28W51B A09DS09DS28W51B A10DS10DS28W51B A11DS11DS28W51B A12DS12DS28W51B A13DS13DS28W51B A14DS14DS28W51B A15DS15DS28W51B TOTAL WIRE REQUIRED 101.6 152.4 203.2 254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4 711.2 762.0 (59.4 +/- 3.0) C C 50.8 +/- 3.0 1 D 1 PIN 1 2.0 PIN 1 2 B B SCALE 1: 1 DIMENSIONS CUSTOMER NAME All dimensions are in MM with a tolerance of +/- 3.0 unless otherwise specified. A DRAWN BY A DESCRIPTION 2.0 mm Pitch DS Standard Catalog Assembly - 2" Overall Len gth – Pin out: 1 to N ASSEMBLY PART NO. STEVEN PILKINGTON REV. DESCRIPTION 4 DATE 3 BY CUSTOMER PART NO. CHECK ED BY SEE TABLE 1 DRAWING NO. & REVISION JUSTIN BAKER 2 REVISED GAM-028 3/4/2016 1