HCC/HCF4555B HCC/HCF4556B DUAL BINARY TO 1 OF 4 DECODER/DEMULTIPLEXERS 4555B OUTPUTS HIGH ON SELECT 4556B OUTPUTS LOW ON SELECT .. . .. .. EXPANDABLE WITH MULTIPLE PACKAGES STANDARD, SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE 5V, 10V, AND 15V PARAMETRIC RATINGS INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENo TATIVE STANDARD N . 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) M1 (Micro Package) F (Ceramic Frit Seal Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC45XXBF HCF45XXBM1 HCF45XXBEY HCF45XXBC1 PIN CONNECTIONS 4555B DESCRIPTION The HCC4555B, HCC4556B (extended temperature range) and the HCF4555B, HCF4556B (intermediate temperature range) are monolithic integrated circuits available in 16-lead dual in-line plastic or ceramic package and plastic micropackage. The HCC/HCF4555B and HCC/HCF4556B are dual one-of-four decoders/demultiplexers. Each decoder has two select inputs (A and B), an Enable input (E), and four mutually exclusive outputs. On the HCC/HCF4555B the outputs are high on select ; on the HCC/HCF4556B the outputs are low on select. When the Enable input is high, the outputs of the HCC/HCF4555B remain low and the outputs of the HCC/HCF4556B remain high regardless of the state of the select inputs A and B. June 1989 4556B 1/14 HCC/HCF4555B/4556B FUNCTIONAL DIAGRAMS 4555B 4556B ABSOLUTE MAXIMUM RATINGS Symbol V DD* Parameter Supply Voltage : HC C Types H C F Types Vi Input Voltage II Value Unit – 0.5 to + 20 – 0.5 to + 18 V V – 0.5 to V DD + 0.5 V DC Input Current (any one input) ± 10 mA Pt ot Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range 200 mW 100 mW Top Operating Temperature : HCC Types H CF Types – 55 to + 125 – 40 to + 85 °C °C Tstg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltages values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top 2/14 Parameter Supply Voltage : HCC Types HC F Types Input Voltage Operating Temperature : HCC Types H CF Types Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C HCC/HCF4555B/4556B LOGIC DIAGRAMS 4555B 4556B TRUTH TABLE Inputs Enable Select Outputs 4555B Outputs 455 6B E B A Q3 Q2 Q1 Q0 Q3 Q2 Q1 Q0 0 0 0 0 0 0 1 1 1 1 0 0 0 1 0 0 1 0 1 1 0 1 0 1 0 0 1 0 0 1 0 1 1 0 1 1 1 0 0 0 0 1 1 1 1 X X 0 0 0 0 1 1 1 1 X = DON’T CARE, LOGIC 1 = HIGH, LOGIC 0 = LOW. 3/14 HCC/HCF4555B/4556B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL V OH V OL Parameter Quiescent Current VI (V) VO (V) V IL I OH 0/ 5 5 5 0.04 5 150 HCC Types 0/15 10 10 0.04 10 300 15 20 0.04 20 600 0/20 20 100 0.08 100 3000 0/ 5 HCF 0/10 Types 0/15 5 20 0.04 20 150 10 40 0.04 40 300 15 80 0.04 80 600 Output High Voltage Output Low Voltage 0/ 5 <1 5 4.95 4.95 4.95 0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.95 5/0 <1 5 0.05 0.05 0.05 10/0 <1 10 0.05 0.05 0.05 I OL I IH , I IL CI Input High Voltage Input Low Voltage Output Drive Current Output Sink Current Input Leakage Current |I O | V D D T L o w* 25 °C T Hi g h * (µA) (V) Min. Max. Min. Typ. Max. Min. Max. 0/10 15/0 V IH Value <1 15 0.5/4.5 <1 5 1/9 0.05 3.5 0.05 3.5 <1 10 7 7 7 15 11 11 11 4.5/0.5 <1 5 1.5 1.5 1.5 9/1 <1 10 3 3 3 13.5/1.5 < 1 15 4 4 4 2.5 5 – 2 – 1.6 – 3.2 – 1.15 HCC Types 0/10 4.6 5 – 0.64 – 0.51 – 1 – 0.36 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9 0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4 0/ 5 2.5 5 – 1.53 – 1.36 – 3.2 – 1.1 0/ 5 HCF Types 0/10 4.6 5 – 0.52 – 0.44 – 1 – 0.36 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9 0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4 0/ 5 0.4 5 0.64 0.51 1 0.36 HCC 0/10 Types 0/15 0.5 10 1.6 1.3 2.6 0.9 1.5 15 4.2 3.4 6.8 2.4 0/ 5 0.4 5 0.52 0.44 1 0.36 HCF 0/10 Types 0/15 0.5 10 1.3 1.1 2.6 0.9 1.5 15 3.6 3.0 6.8 2.4 V V mA mA 18 ± 0.1 ±10 – 5 ± 0.1 ± 1 15 ± 0.3 ±10 – 5 ± 0.3 ± 1 µA Any Input Any Input V 0.05 0/ 5 Input Capacitance V 1.5/13.5 < 1 HCF 0/15 Types µA 3.5 0/ 5 HCC 0/18 Types Unit 5 7.5 pF (*) T LOW= – 55°C for HCC device : – 40°C for HCF device. (*) THIGH = + 125°C for HCC device : + 85°C for HCF device. The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V. 4/14 HCC/HCF4555B/4556B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200kΩ, typical temperature coefficient for all V DD values is 0.3%/°C, all input rise and fall times = 20ns) Symbol t PL H, t P HL Parameter Propagation Delay Time (A or B input to any output) Propagation Delay Time (E input to any output) t T L H, t T HL Transition Time Test Conditions Value V D D (V) Min. Typ. Max. 5 220 440 10 95 190 15 70 140 5 200 400 10 85 170 15 65 130 5 100 200 10 50 100 15 40 80 Unit ns ns ns Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. 5/14 HCC/HCF4555B/4556B Typical Propagation Delay Time vs. Load Capacitance (A or B input to any output). Typical Propagation Delay Time vs. Load Capacitance (E input to any input ). Typical Propagation Delay Time vs. Supply Voltage. Typical Transition Time vs. Load Capacitance. Typical Dynamic Power Dissipation/per Device vs. Frequency. 6/14 HCC/HCF4555B/4556B APPLICATIONS 1 of 4 Line Data Demultiplexer using HCC/HCF4555B TRUTH TABLE Select Inputs Outputs B A Q0 Q1 Q2 Q3 0 0 DATA 0 0 0 0 1 0 DATA 0 0 1 0 0 0 DATA 0 1 1 0 0 0 DATA 1 of 8 Decoder using HCC/HCF 4555B TRUTH TABLE Inputs Q Outputs C B A 0 1 2 3 4 5 6 7 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 0 0 0 1 1 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 1 0 1 0 0 0 0 0 1 0 0 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 7/14 HCC/HCF4555B/4556B APPLICATIONS (continued) 1 of 16 Decoder using HCC/HCF4555B and HCC/HCF4556B TRUTH TABLE Inputs Q Outputs E D C B A 0 1 2 3 4 5 6 7 8 9 10 11 1 2 1 3 14 15 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 X X X X 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 X = Don’t care. HCC/HCF4555B Input to Q3 Output Dynamic Signal Waveforms 8/14 HCC/HCF4556B Input to Q3 Output Dynamic Signal Waveforms HCC/HCF4555B/4556B APPLICATIONS (continued) HCC/HCF4555B E Input to Q3 Output Dynamic Signal Waveforms HCC/HCF4556B E Input to Q3 Output Dynamic Signal Waveforms TEST CIRCUITS Quiescien tDevice Current. Noise Immunity. Input Leakage Current. 9/14 HCC/HCF4555B/4556B Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 10/14 HCC/HCF4555B/4556B Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 11/14 HCC/HCF4555B/4556B SO16 (Narrow) MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 E 5.8 10 0.385 6.2 0.228 0.393 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8° (max.) P013H 12/14 HCC/HCF4555B/4556B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 13/14 HCC/HCF4555B/4556B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 14/14